Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure for Quality and Industrial Safety Regulation, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette" No. 32, of 6 February 1996), as amended by Royal Decree 1072/2015 of 27 November ("Official State Gazette" No. 298, of 14 December 2015), and having regard to the file of the rules approved by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985 of 1 August 1985 and recognized by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate-General has decided to publish in the "Official State Gazette" the relationship of Spanish standards UNE approved by the Spanish Association for Standardisation and Certification, corresponding to the month of September 2016, identified by its title and numerical code, which is listed as an annex to this resolution.
This resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, October 18, 2016. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Edited rules in the month of September 2016
Title | Replaces |
||
---|---|---|---|
Health Grifair. Technical specifications. | UNE 19703:2015 | ||
27273:2016 | Construction and civil naval repair. Standard components. Scales: Outinclined outer scale 45º. | ||
27274:2016 | Civil shipbuilding and repair. Standard components. Scales: Outinclined outer scale 50º. | ||
27440:2016 | Civil shipbuilding and repair. Selective lists. Pipes and Accessories: Flat steel flanges. | ||
27550:2016 | Civil shipbuilding and repair. Standard components. Flat flange for ventilation hoses. | ||
27551:2016 | Civil shipbuilding and repair. Standard components. Ventilation hoses. | ||
27552:2016 | Civil shipbuilding and repair. Standard components. Hoses and ventilation grids. Weatherproof ventilation hoses. | ||
27585:2016 | Civil shipbuilding and repair. Standard components. Vertical opening seal for ventilation grating. | ||
27586:2016 | Civil shipbuilding and repair. Standard components. Lateral opening seal for ventilation grating. | ||
27667:2016 | Civil shipbuilding and repair. Standard components. Long angular support for pipe with round clamp. | ||
34902:2016 | Cereals and derived products. Wheat flour panification test method for direct-method-bar bread. | ||
38002:2016 | Definition and designation of the treatment states for lightweight alloys. | UNE 38002:1991 UNE 38002 /1M: 1994 | |
48272:2016 | Paintings and varnishes. Repainable intermediate epoxy paint. | UNE 48272:2003 | |
48277:2016 | Paintings and varnishes. Zinc-rich epoxy primer. | UNE 48277:2005 | |
48278:2016 | Paintings and varnishes. High-thickness epoxy coating free of pitch. | UNE 48278:2005 | |
48295:2016 | Paintings and varnishes. Intermediate epoxy iron oxide epoxy paint. | UNE 48295:2003 | |
53008-2:2016 | Pipeline Systems in Plastic Materials. Multi-layer pipe systems for gas receiving installations with a maximum operating pressure (MOP) of less than or equal to 5 bar (500 kPa). Part 2: Design, installation, and maintenance. | ||
53218:2016 | Plastic Materials. Determination of resistance to quartement by stresses in active environments of polyethylene plastic materials. | UNE 53218:2009 | |
UNE 53539:2016 | Non-metallic flexible tubes for connections to installations and appliances using gaseous fuels from the 2nd and 3rd family. Test features and methods. | UNE 53539:2012 | |
54130:2016 | Guidelines for the elaboration of a graphical production-oriented corporate identity manual. | UNE 54130-1:2008 | |
UNE 58451:2016 | Training of maintenance forklift operators up to 10 000 | UNE 58451:2014 | |
68112:2016 | Agricultural and forestry machinery. Self-propelled work equipment with a driving position. Principles and evaluation of the deployment of automatic protection structures. | ||
112086:2016 | Essays tribocorrosion in passive materials. | ||
UNE-CEN/TS 16490:2016 | Fertilizers. Comparison of the results of the interlaboratory tests of CEN/TC 260 /WG 7 with the tolerances given in Regulation (EC) No 2003/2003 Annex II and conclusions. | ||
UNE-EN 54-22:2016 | Fire detection and alarm systems. Part 22: Rearmable heat linear detectors. | ||
UNE-EN 196-10:2016 | Cement test methods. Part 10: Determination of water-soluble chromium (VI) content in cements. | UNE-EN 196-10:2008 | |
UNE-EN 581-2:2016/AC: 2016 | Outdoor Furniture. Seats and tables of domestic, public and camping use. Part 2: Mechanical safety requirements and test methods for seats. | ||
UNE-EN 771-2:2011 + A1:2016 | Parts Specifications for masonry factory. Part 2: Silicocalcareous pieces. | ||
UNE-EN 878:2016 | Chemicals used for the treatment of water intended to human consumption. Aluminum sulfate. | UNE-EN 878:2004 | |
UNE-EN 902:2016 | Chemicals used for the treatment of water intended for human consumption. Hydrogen peroxide. | UNE-EN 902:2009 | |
UNE-EN 937:2016 | Chemicals used for the treatment of water intended for human consumption. Cloro. | UNE-EN 937:2009 | |
UNE-EN 938:2016 |
Chemicals used for the treatment of water intended for human consumption. Sodium chlorite. | UNE-EN 938:2009 | |
UNE-EN 939:2016 | Chemicals used for the treatment of water intended for human consumption. Hydrochloric acid. | UNE-EN 939:2009 | |
UNE-EN 1365-2:2016 | fire resistance for supporting elements. Part 2: Soils and covers. | UNE-EN 1365-2:2000 | |
UNE-EN 1366-1:2016 | Trials of fire resistance of service facilities. Part 1: Ventilation pipelines. | UNE-EN 1366-1:2000 | |
UNE-EN 1366-10:2016 | Service facility fire resistance tests. Part 10: Humm control doors. | ||
UNE-EN 1381:2016 | Wood structures. Test methods. Stapled structural joins. | UNE-EN 1381:2000 | |
UNE-EN 1382:2016 | Wood Structures. Test methods. Resistance to starting the fixing elements in the wood. | UNE-EN 1382:2000 | |
UNE-EN 1397 :2016/AC: 2016 |
Heat exchangers. Hydraulic (fan coils) vents. Test procedures to determine their performance. | ||
UNE-EN 1420:2016 | Influence of Organic Materials on water intended for human consumption. Determination of the smell and taste of water in the distribution networks. | UNE-EN 1420-1:2000 | |
UNE-EN 1434-2:2016 |
Thermal energy counters. Part 2: Build requirements. | UNE-EN 1434-2:2007 UNE-EN 1434-2:2007/AC: 2008 | |
UNE-EN 1634-1:2016 | Fire resistance and smoke control tests of doors and locking elements of voids, practicables and fittings for building. Part 1: Door fire resistance tests, hole-lock elements, and practicable windows. | UNE-EN 1634-1:2010 | |
UNE-EN 1729-1:2016 | Furniture. Chairs and tables for schools. Part 1: Functional dimensions. | UNE-EN 1729-1:2007 | |
UNE-EN 10305-1:2016 | Steel Tubes for Precision Applications. Technical conditions of supply. Part 1: Cold-stretched seamless pipes. | UNE-EN 10305-1:2011 | |
UNE-EN 10305-2:2016 | Steel Tubes for Precision Applications. Technical conditions of supply. Part 2: Cold-stretched welded tubes. | UNE-EN 10305-2:2011 | |
UNE-EN 10305-3:2016 | Steel Tubes for Precision Applications. Technical conditions of supply. Part 3: Cold calibrated welded tubes. | UNE-EN 10305-3:2011 | |
UNE-EN 10305-4:2016 | Steel Tubes for Precision Applications. Technical conditions of supply. Part 4: Cold-drawn seamless pipes for hydraulic and pneumatic circuits. | UNE-EN 10305-4:2011 | |
UNE-EN 10305-5:2016 | Steel tubes for precision applications. Technical conditions of supply. Part 5: Soldiers and cold calibrated tubes of square and rectangular section. | UNE-EN 10305-5:2011 | |
UNE-EN 12101-3:2016 | Smoke and heat control systems. Part 3: Specification for mechanical smoke and heat control aerators (Ventilators). | ||
UNE-EN 12671:2016 | Chemicals used in the treatment of water intended for human consumption. Generated chlorine dioxide in situ. | UNE-EN 12671:2009 | |
UNE-EN 12672:2016 | Chemicals used for the treatment of water intended for human consumption. Potassium permanganate. | UNE-EN 12672:2008 | |
UNE-EN 12678:2016 | Products chemicals used in the treatment of water intended for human consumption. Potassium peroxomonosulfate. | UNE-EN 12678:2008 | |
UNE-EN 13107 :2015/AC: 2016 | Security requirements for cable transport installations for people. Civil engineering works. | ||
UNE-EN 13209-2:2016 | Child care articles. Backpacks. Safety requirements and test methods. Part 2: Non-rigid Mochilas. | UNE-EN 13209-2:2006 | |
UNE-EN 13329:2016 | Laminates floor coverings. Surface layer elements based on thermostable aminoplastic resins. Specifications, requirements, and test methods. | UNE-EN 13329:2007 + A1:2009 | |
UNE-EN 13381-1:2016 | Test Methods to determine the contribution to the fire resistance of the structural elements. Part 1: Horizontal protective membranes. | ||
UNE-EN 13381-2:2016 | Test methods for determining contribution to the fire resistance of the structural elements. Part 2: Vertical protective membranes. | UNE-ENV 13381-2:2004 | |
UNE-EN 13381-3:2016 | Test Methods to determine the contribution to the fire resistance of structural elements. Part 3: Protection applied to concrete elements. | UNE-ENV 13381-3:2004 | |
UNE-EN 13381-5:2016 | Test Methods to determine the contribution to the fire resistance of structural elements. Part 5: Protection applied to mixed concrete/steel sheet elements profiled. | UNE-ENV 13381-5:2005 | |
UNE-EN 13381-9:2016 | Test methods for determining the contribution to the fire resistance of structural elements. Part 9: Fire protection systems applied to steel beams with openings in the soul. | ||
UNE-EN 13451-2:2016 | Equipment for Pools. Part 2: Specific safety requirements and additional test methods for scales, staircases and railings. | UNE-EN 13451-2:2001 UNE-EN 13451-2/AC: 2004 | |
UNE-EN 13538-3:2016 | Determining the dimensional characteristics of sleeping bags. Part 3: Volume under load and ease of packaging. | UNE-EN 13538-3:2002 | |
UNE-EN 13634:2016 | Protection for Motorists. Testing requirements and methods. | UNE-EN 13634:2015 (Ratified) | |
UNE-EN 13757-6:2016 | Communication Systems for Counters. Part 6: Local bus. | UNE-EN 13757-6:2009 | |
UNE-EN 13924-1:2016 | Betunes and Bituminous binders. Framework for the specification of special bitumen for paving. Part 1: Hard Betunes for Pavement. | ||
UNE-EN 13964:2016 | Suspended beds. Testing requirements and methods. | ||
UNE-EN 14531-2:2016 | Railway applications. Methods for the calculation of stop and deceleration braking distances and immobilization. Part 2: Step-by-step calculations for train or isolated vehicle compositions. | UNE-EN 14531-6:2010 | |
UNE-EN 14617-2:2016 | Agglomerated stone. Test methods. Part 2: Determination of flexural strength. | UNE-EN 14617-2:2008 | |
UNE-EN 14662-3:2016 | Environment. Standard method for the measurement of benzene concentrations. Part 3: Auto-to-suction sample with gas chromatography in situ | UNE-EN 14662-3:2006 | |
UNE-EN 15269-2:2016 | Extension of application of fire resistance and/or smoke control test results for doors, blinds and practicable windows, including their fittings for the building. Part 2: Fire resistance from pivoters and steel-beating door sets. | ||
UNE-EN 15269-3:2016 | Extension the application of the test results of fire resistance and/or control of smoke for doors, blinds and practicable windows, including their fittings for building. Part 3: Fire resistance of pivoters and beatiles wooden door sets and practicable wooden structure windows. | ||
UNE-EN 15269-5:2016 |
Extension of application of fire resistance test results and/or smoke control for doors, blinds and practicable windows, including their building fittings. Part 5: Fire resistance of glass door sets with metal frame and beatiers and windows practicable. | ||
UNE-EN 15468:2016 |
Laminate floor coverings. Elements with a printing layer applied directly and with a surface layer of resin. Specifications, requirements, and test methods. | UNE-EN 15468:2008 | |
UNE-EN 15882-2:2016 | Extension of the application field of the results of the service facility fire resistance tests. Part 2: Fire doors. | ||
UNE-EN 16709 :2016/AC: 2016 | Automotive fuels. Fuels for diesel engine (diesel) with a high content of FAME (B20 or B30). Testing requirements and methods. | ||
UNE-EN 16712-1:2016 | Portable equipment for projecting supplied extinguishing agents for fire-fighting pumps. Portable foam equipment Part 1: Inductors PN 16. | ||
UNE-EN 16720-1:2016 | Sludge characterization. Physical consistency. Part 1: Determination of fluidity. Method using an extrusion pipe equipment. | ||
UNE-EN 16726:2016 | Gas Infrastructure. Quality of the gas. Group H. | ||
UNE-EN 16732:2016 | Cremalleras. Specifications. | ||
UNE-EN 16736:2016 | Evaluation of health risks caused by chemicals. Requirements for training delivery. | ||
UNE-EN 16772:2016 | Water quality. Guide to methods for the sampling of invertebrates in the hyporreic area of rivers. | ||
UNE-EN 16773:2016 | Aluminium and aluminium alloys. Guidelines for the production of thin sheets (foil-stock) in the field of semi-rigid food packaging. | ||
UNE-EN 16812:2016 | Textiles and textile products. Electrically conductive textiles. Determining the linear electrical resistance of conductive tracks. | ||
UNE-EN 50131-2-7-1:2013/A2:2016 | Systems alarm. Intrusion and docking alarm systems. Part 2-7-1: Intrusion detectors. Crystal break detectors (acoustics) | ||
UNE-EN 50131-2-7-2:2013/A2:2016 | Alarm systems. Intrusion and docking alarm systems. Part 2-7-2: Intrusion detectors. Crystal break detectors (liabilities). | ||
UNE-EN 50131-2-7-3:2013/A2:2016 | Alarm systems. Intrusion and docking alarm systems. Part 2-7-3: Intrusion detectors. Crystal break detectors (assets). | ||
UNE-EN 50193-2-1:2016 | Instant water electric heaters. Part 2-1: Methods of measurement of fitness. Multi-functional electric instant water heaters. | ||
UNE-EN 50194-2:2007/A1:2016 | Electrical appliances for the detection of combustible gases in domestic premises. Part 2: Electrical equipment for continuous operation in fixed installations of recreational vehicles and similar sites. Additional testing methods and operating requirements. | ||
UNE-EN 50577:2016 | Electrical Cables. Fire resistance test of the unshielded electrical cables (P rating). | ||
UNE-EN 60317-0-4:2016 | Specifications for particular types of threads for electromagnetic coils. Part 0-4: General requirements. Bare or enamelled rectangular section copper wire, coated with fiberglass, impregnated with varnish or resin. | ||
UNE-EN 60317-31:2016 | Specifications for particular types of threads for electromagnetic coils. Part 31: Copper thread of rectangular section, naked or enamelled, coated with glass fibre impregnated with varnish or resin, temperature index 180. | ||
UNE-EN 60317-32:2016 | Specifications for particular types of wires for electromagnetic coils. Part 32: Copper thread of rectangular section, naked or enamelled, coated with glass fibre impregnated with varnish or resin, temperature index 155. | ||
UNE-EN 60317-33:2016 | Specifications for particular types of wires for electromagnetic coils. Part 33: Copper thread of rectangular section, naked or enamelled, coated with glass fibre impregnated with varnish or resin, temperature index 200. | ||
UNE-EN 60335-2-14:2008/A12:2016 | Appliances and analogues. Security. Part 2-14: Particular requirements for kitchen machines. | UNE-EN 60335-2-14:2008/A11:2012/AC: 2013 | |
UNE-EN 60335-2-58:2005/A12:2016 | Appliances and analogues. Security. Part 2-58: Particular requirements for collective electrical dishwashers. | ||
UNE-EN 60335-2-86:2004/A11:2016 | Appliances and Analog Appliances. Security. Part 2-86: Particular requirements for electrical fishing equipment. | ||
UNE-EN 60357:2004/A11:2016 | halogen lamps (except for vehicles). Operating requirements. | ||
UNE-EN 60601-2-25:2016 | Electromedical equipment. Part 2-25: Particular requirements for the basic safety and essential functioning of electrocardiographers. | ||
UNE-EN 60601-2-49:2016 | Electromedical Equipment. Part 2-49: Particular requirements for the basic safety and essential functioning of the patient monitoring multifunction equipment. | ||
UNE-EN 60702-3:2016 | Cables with rated voltage mineral isolation not exceeding 750 V and their connections. Part 3: Usage Guide. | UNE 21157-3:2002 | |
UNE-EN 61303 :1997/AC: 2016-07 | Electromedical Equipment. Radionuclide calibrators. Particular methods to describe how they work. | ||
UNE-EN 61377:2016 | Railway applications. Rolling stock. Combined test method for traction systems. | ||
UNE-EN 62080:2010/A2:2016 | Sound signalling devices for domestic and analog use. | ||
UNE-EN 62722-1:2016 | luminaires ' purposes. Part 1: General requirements. | ||
UNE-EN 62722-2-1:2016 | luminaires ' Prstations. Part 2-1: Particular requirements for LED luminaries. | ||
UNE-EN 62841-3-10:2016/AC: 2016-07 | Portable tools, Semi-fixed and semi-fixed garden machinery and machinery, operated by electric motor. Security. Part 3-10: Particular requirements for semi-fixed tronzators. | ||
UNE-EN ISO 137:2016 | Lana. Determination of the fiber diameter. Projection microscope method. (ISO 137:2015). | ||
UNE-EN ISO 1043-1:2012/A1:2016 | Plastics. Symbols and abbreviations. Part 1: Base polymers and their special characteristics. (ISO 1043-1:2011/Amd 1:2016). | ||
UNE-EN ISO 1043-4:2000/A1:2016 | Plastics. Symbols and abbreviations. Part 4: flame retardants. (ISO 1043-4:1998/Amd 1:2016). | ||
UNE-EN ISO 3691-1:2015/AC: 2016 | Maintenance trucks. Security and verification requirements. Part 1: Self-propelled maintenance trucks, other than the driverless wheelbarrows, variable-range wheelbarrows and freight-carrying trucks. (ISO 3691-1:2011, including Cor 1:2013). | ||
UNE-EN ISO 3691-2:2016 | Maintenance trucks. Security and verification requirements. Part 2: Self-propelled, variable-range trucks. (ISO 3691-2:2016). | ||
UNE-EN ISO 3691-5:2015/AC: 2016 | Maintenance trucks. Security and verification requirements. Part 5: Walk-led trucks. (ISO 3691-5:2014). | ||
UNE-EN ISO 3691-6:2016/AC: 2016 | Maintenance Carrows. Security and verification requirements. Part 6: Cargo and people transporting trucks. (ISO 3691-6:2013). | ||
UNE-EN ISO 4499-3:2016 | Metal hard. Metallographic determination of microstructure. Part 3: Measurement of microstructural characteristics in base Ti (C, N) and WC base metals, with additions of other cubic carbides. (ISO 4499-3:2016). | ||
UNE-EN ISO 4499-4:2016 | Metal hard. Metallographic determination of microstructure. Part 4: Characterization of porosity, carbon defects, and the content of the eta phase. (ISO 4499-4:2016). | UNE-EN 24505:2006 | |
UNE-EN ISO 4630:2016 | Liquids transparent. Color estimation using the Gardner color scale. (ISO 4630:2015). | UNE-EN ISO 4630-1:2006 UNE-EN ISO 4630-2:2006 | |
UNE-EN ISO 5774:2016 | Plastics based on plastics. Types with textile reinforcement for compressed air. Specifications. (ISO 5774:2016). | UNE-EN ISO 5774:2008 | |
UNE-EN ISO 6271:2016 | Liquids transparent. Colour assessment using the platinum-cobalt scale. (ISO 6271:2015). | UNE-EN ISO 6271-1:2006 UNE-EN ISO 6271-2:2006 | |
UNE-EN ISO 6926:2016 | Acoustics. Requirements for the operation and calibration of reference acoustic sources used for the determination of sound power levels. (ISO 6926:2016). | UNE-EN ISO 6926:2002 | |
UNE-EN ISO 7438:2016 | Materials metal. Bending essay (ISO 7438:2016). | UNE-EN ISO 7438:2006 | |
UNE-EN ISO 7500-1:2016 | Metal Materials. Calibration and verification of static uniaxial test machines. Part 1: Traction/compression test machines. Calibration and verification of the force measurement system. (ISO 7500-1: 2015). | UNE-EN ISO 7500-1:2006 UNE-EN ISO 7500-1:2006/AC: 2009 | |
UNE-EN ISO 7784-1:2016 | Paintings and varnishes. Determination of abrasion resistance. Part 1: Method of wheels coated with abrasive paper and rotary test panel. (ISO 7784-1:2016). | UNE-EN ISO 7784-1:2007 | |
UNE-EN ISO 7784-2:2016 | Paintings and varnishes. Determination of abrasion resistance. Part 2: abrasive rubber wheel method and rotary test panel (ISO 7784-2:2016). | UNE-EN ISO 7784-2:2007 | |
UNE-EN ISO 7784-3:2016 | Paintings and varnishes. Determination of abrasion resistance. Part 3: Method with a wheel covered with abrasive paper and test tube subjected to a linear movement. (ISO 7784-3:2016). | UNE-EN ISO 7784-3:2007 | |
UNE-EN ISO 8430-1:2016 | Soldeo by points resistance. Electrodes. Part 1: Fixing 1:10 (ISO 8430-1:2016). | UNE-EN 28430-1:1993 | |
UNE-EN ISO 8430-2:2016 | Soldeo by point resistance. Electrodes. Part 2: Cono Morse fixation (ISO 8430-2:2016). | UNE-EN 28430-2:1993 | |
UNE-EN ISO 8430-3:2016 | Soldeo by point resistance. Electrodes. Part 3: cylindrical Mango for axial thrust (ISO 8430-3:2016). | UNE-EN 28430-3:1993 | |
UNE-EN ISO 8968-4:2016 |
Milk and dairy products. Determination of the nitrogen content. Part 4: Determination of protein and non-protein nitrogen content and calculation of the true protein content (Reference method). (ISO 8968-4:2016). | UNE-EN ISO 8968-4:2002 UNE-EN ISO 8968-5:2002 | |
UNE-EN ISO 9698:2016 | Water quality. Determination of the tritium volumetric activity. Method by liquid scintillation counting. (ISO 9698:2010). | ||
UNE-EN ISO 10703:2016 | Water quality. Determination of the concentration of radionuclide activity. Method by high resolution gamma ray spectrometry. (ISO 10703:2007). | ||
UNE-EN ISO 11704:2016 | Water quality. Measurement of the activity concentration of total alpha and total beta in non-saline water. Liquid scintillation counting method (ISO 11704:2010). | ||
UNE-EN ISO 12460-4:2016 | Wood-derived tablets. Determination of the emission of formaldehyde. Part 4: Desiccant Method (ISO 12460-4:2016). | ||
UNE-EN ISO 12707:2016 | Non-destructive testing. Test for magnetic particles. Terminology (ISO 12707:2016). | UNE-EN 1330-7:2006 | |
UNE-EN ISO 12966-3:2016 | Aceites and animal and vegetable fats. Gas chromatography of fatty acid methyl esters. Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) (ISO 12966-3:2016). | UNE-EN ISO 12966-3:2010 | |
UNE-EN ISO 13160:2016 | Water quality. Strontium 90 and strontium 89. Test methods using liquid scintillation or proportional counting. (ISO 13160:2012). | ||
UNE-EN ISO 13162:2016 | Water quality. Determination of the activity of carbon 14. Liquid scintillation measurement method (ISO 13162:2011). | ||
UNE-EN ISO 13849-1:2016 | Machine safety. Parts of the control systems relating to safety. Part 1: General principles for design. (ISO 13849-1:2015). | UNE-EN ISO 13849-1:2008 UNE-EN ISO 13849-1:2008/AC: 2009 | |
UNE-EN ISO 14004:2016 | Environmental management systems. General guidelines on implementation. (ISO 14004:2016). | UNE-EN ISO 14004:2010 | |
UNE-EN ISO 15366-1:2016 | Technology Nuclear fuel. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic analysis and isotopic dilution by solvent extraction chromatography. Part 1: Samples containing plutonium in the range of microgram and uranium in the range of milligram (ISO 15366-1: 2014). | ||
UNE-EN ISO 15366-2:2016 |
Nuclear fuel technology. Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic analysis and isotopic dilution by solvent extraction chromatography. Part 2: Samples containing plutonium and uranium in the range of nanogram and lower (ISO 15366-2:2014). | ||
UNE-EN ISO 15646:2016 | Resintering Assay for UO2 Pills, (U, Gd) O2 and (U, Pu) O2 (ISO 15646:2014). | ||
UNE-EN ISO 16283-3:2016 | Acous_body. Measurement in situ of acoustic insulation in buildings and building elements. Part 3: Insulation to facade noise. (ISO 16283-3:2016). | UNE-EN ISO 140-5:1999 UNE-EN ISO 140-14:2005 UNE-EN ISO 140-14:2005/AC: 2009 | |
UNE-EN ISO 16315:2016 | Small boats. Electric propulsion system (ISO 16315:2016). | ||
UNE-EN ISO 16373-1:2016 | Textiles. Colorants. Part 1: General principles for the testing of dyed textiles for the identification of colours. (ISO 16373-1:2015). | ||
UNE-EN ISO 16482-1:2016 | Ligants for paints and varnishes. Determination of the non-volatile matter content of the aqueous dispersions of rosin resin. Part 1: Stoven method (ISO 16482-1:2013). | ||
UNE-EN ISO 16482-2:2016 | Ligants for paints and varnishes. Determination of the non-volatile matter content of aqueous dispersions of rosin resin. Part 2: Microwave method (ISO 16482-2:2013). | ||
UNE-EN ISO 16634-2:2016 | Food products. Determination of the total nitrogen content by combustion according to the principle of the DUMAS method and calculation of the raw protein content. Part 2: Cereals, legumes, and cereal-based products (ISO 16634-2:2016). | ||
UNE-EN ISO 16773-3:2016 |
| UNE-EN ISO 16773-3:2009 | |
UNE-EN ISO 17491-4:2009/A1:2016 | Protection Append. Test methods for protective clothing against chemicals. Part 4: Determination of the resistance to the spray penetration of liquids (spray test). (ISO 17491-4:2008/Amd 1:2016). | ||
UNE-EN ISO 17683:2016 | Shipping and maritime technology. Welding ceramic supports for maritime use (ISO 17683:2014). | ||
UNE-EN ISO 17697:2016 | Footwear. Test methods for instarts, linings and insoles. Seam resistance. (ISO 17697:2016). | UNE-EN 13572:2002 | |
UNE-EN ISO 17698:2016 | Calzado. Test methods for cuts. Resistance to exfoliation. (ISO 17698:2016). | UNE-EN 13514:2002 | |
UNE-EN ISO 17751-1:2016 | Textiles. Quantitative analysis of cashmere, wool, other special animal fibres and mixtures thereof. Part 1: Method of the optical microscope. (ISO 17751-1:2016). | ||
UNE-EN ISO 17855-2:2016 | Plastics. Polyethylene (PE) materials for molding and extrusion. Part 2: Preparation of specimens and determination of properties. (ISO 17855-2:2016). | UNE-EN ISO 1872-2:2007 | |
UNE-EN ISO 17881-1:2016 | Textiles. Determination of certain flame retardants. Part 1: Brominated Flame Retardants (ISO 17881-1:2016). | ||
UNE-EN ISO 17881-2:2016 | Textiles. Determination of certain flame retardants. Part 2: Phosphorus flame retardants. (ISO 17881-2: 2016). | ||
UNE-EN ISO 17943:2016 | Water quality. Determination of volatile organic compounds in water. Method using solid phase microextraction of the headspace (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS). (ISO 17943:2016). | ||
UNE-EN ISO 18635:2016 | Water quality. Determination of short chain polychlorinated alkanes (SCCP) in sediments, sewage sludge and particulate matter in suspension. Method by gas chromatography-mass spectrometry (CG-EM) with negative chemical ionization (IQN). (ISO 18635:2016). | ||
UNE-EN ISO 18744:2016 | Food Chain Microbiology. Detection and counting of Cryptosporidium and Giardia in green leaf and berry vegetables. (ISO 18744:2016). | ||
UNE-EN ISO 22649:2016 | Calzado. Test methods for palmmiles and templates. Absorption and desorption of water. (ISO 22649:2016). | UNE-EN 12746:2001 UNE-EN 12746:2001/A1:2005 | |
UNE-EN ISO 28706-4:2016 | Vitreous and porcelain Esmites. Determination of chemical corrosion resistance. Part 4: Determination of chemical corrosion resistance by alkaline liquids using a cylindrical container (ISO 28706-4:2016). | UNE-EN ISO 28706-4:2012 | |
UNE-EN ISO 28765:2016 | Vitreous and Porcelain EsmMaltese. Design of steel tanks for the storage or treatment of water or discharges and municipal or industrial sludge. (ISO 28765:2016). | UNE-EN ISO 28765:2012 | |
UNE-EN ISO/IEC 13273-1:2016 | Energy Efficiency and Renewable Energy Sources. Common international terminology. Part 1: Energy efficiency. (ISO/IEC 13273-1:2015). | UNE-CEN/CLC/TR 16103:2010 IN | |
UNE-EN ISO/IEC 13273-2:2016 | Energy Efficiency and Renewable Energy Sources. Common international terminology. Part 2: Renewable energy sources. (ISO/IEC 13273-2:2015). | UNE-CEN/CLC/TR 16103:2010 IN | |
-ISO 13207-1:2016 | Road Vehicles. Characteristics of LED lamps for lamp-compatible fault detection. Part 1: LED lamps used for direction indicators. | ||
-ISO 18321:2016 | Essential oils. Determination of the peroxide index. |