Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Quality and Industrial Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("Official State Gazette" number 32, 6 February 1996), as amended by Royal Decree 1072/2015 of 27 November ("Official State Gazette" number 298 of 14 December), and having regard to the standards developed by the European standardisation bodies, CEN, CENELEC, ETSI and national transposition corresponds to the Spanish Association of Standardization and Certification entity In accordance with Royal Decree 1614/1985 of 1 August 1986, designated by the Ministry of Industry and Energy of 26 February 1986, and recognised for that purpose by the additional provision of the said Royal Decree 2200/1995, of 28 May 1986, December.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards granted to them by the Spanish UNE standard during the month of September 2016, identified by their title and numerical code, indicating their date of availability, which are listed as an annex to this resolution.
Madrid, October 18, 2016. -Director General Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Ratification of European rules. September 2016
| Title | Code European | F. Availb | Anula | |
|---|---|---|---|---|
| Peage electronic. Test procedures for on-board equipment and fixed equipment. Part 2: Conformity tests of the application interface of the embarked unit (ISO/TS 14907-2:2016). (Ratified by AENOR in September 2016). | CEN ISO/TS 14907-2:2016 | 2016-08-10 | UNE-CEN ISO/TS 14907-2:2011 (Ratified | |
|
UNE-CEN/TR 15728:2016 | Project and use of inserts for the lifting and handling of precast concrete elements. (Ratified by AENOR in September 2016). | CEN/TR 15728:2016 | 2016-02-17 | UNE-CEN/TR 15728:2011 IN |
|
UNE-CLC/TS 50238-2:2015/AC: 2016-07 | Railway Applications. Compatibility between rolling stock and train detection systems. Part 2: Compatibility with track circuits (Ratified by AENOR in September 2016). | CLC/TS 50238-2:2015/AC: 2016-07 | 2016-07-29 | |
| UNE-EN 2997-014:2016 | Aerospace. Circular electrical coupling connectors by threaded ring, resistant or non-fire, temperatures of -65 ° C to 175 ° C, continuous 200 ° C, 260 ° C at peak. Part 014: receptacle with square flange attachment with integrated accessory. Product Standard (Ratified by AENOR in September 2016). | EN 2997-014:2016 | 2016-07-20 | UNE-EN 2997-014:2011 (Ratified |
|
UNE-EN 4474:2016 | Aerospace. Aluminorganic coatings. Coating methods (Ratified by AENOR in September 2016). | EN 4474:2016 | 2016-07-27 | UNE-EN 4474:2009 (Ratified) |
| UNE-EN 16811-1:2016 | Winter Maintenance Equipment. Agents for thawing. Part 1: Sodium chloride. Requirements and test methods. (Ratified by AENOR in September 2016). | EN 16811-1:2016 | 2016-08-10 | |
| UNE-EN 16811-2:2016 | Winter maintenance teams. Agents for thawing. Part 2: Calcium chloride and magnesium chloride. Requirements and test methods. (Ratified by AENOR in September 2016). | EN 16811-2:2016 | 2016-08-10 | |
| UNE-EN 50632-2-3:2016 | Electrical powered by electric motor. Procedure for measuring the dust. Part 2-3: Particular requirements for concrete amolors and disk-type livers (ratified by AENOR in September 2016). | EN 50632-2-3:2016 | 2016-07-22 | |
| UNE-EN 50632-2-4:2016 | Electric powered electric tools. Procedure for measuring the dust. Part 2-4: Particular requirements for slitters other than disk type (Ratified by AENOR in September 2016). | EN 50632-2-4:2016 | 2016-07-22 | |
| UNE-EN 50632-2-5:2016 | Electric power-driven power tools. Procedure for measuring the dust. Part 2-5: Particular requirements for circular saws (ratified by AENOR in September 2016). | EN 50632-2-5:2016 | 2016-07-22 | |
|
UNE-EN 50632-2-11:2016 | Electrical power-powered tools. Procedure for measuring the dust. Part 2-11: Particular requirements for saber-saws and saber-saws. (Ratified by AENOR in September 2016). | EN 50632-11:2016 | 2016-07-22 | |
| UNE-EN 50632-2-14:2016 | Electrical power-powered tools. Procedure for measuring the dust. Part 2-14: Particular requirements for brushes (ratified by AENOR in September 2016). | EN 50632-2-14:2016 | 2016-07-22 |
|
|
UNE-EN 50632-2-17:2016 | Electric powered electric tools. Procedure for measuring the dust. Part 2-17: Particular requirements for milling and profiling (ratified by AENOR in September 2016). | EN 50632-2-17:2016 | 2016-07-22 | |
| Electric power-driven power tools. Procedure for measuring the dust. Part 2-19: Particular requirements for assemblers. (Ratified by AENOR in September 2016). | EN 50632-2-19:2016 | 2016-07-22 | ||
| UNE-EN 50632-3-1:2016 | Electrical power-powered tools. Procedure for measuring the dust. Part 3-1: Particular requirements for semi-fixed table saws. (Ratified by AENOR in September 2016). | EN 50632-3-1:2016 | 2016-07-22 | |
| UNE-EN 60539-1:2016 | Direct-warm negative temperature coefficient thermistors. Part 1: Generic specification. (Ratified by AENOR in September 2016). | EN 60539-1:2016 | 2016-07-22 | |
| UNE-EN 60966-2-4:2016 | Cable connections. Part 2-4: Particular specification for cable connections for radio and television receivers. Frequency range from 0 MHz to 3000 MHz, IEC 61169-2 connectors. (Ratified by AENOR in September 2016). | EN 60966-2-4:2016 | 2016-07-22 | |
| UNE-EN 61300-2-37:2016 | Optical fibre interconnect devices and passive components. Basic tests and measurement procedures. Part 2-37: Essays. Cable curvature for fiber optic closures (Ratified by AENOR in September 2016). | EN 61300-2-37:2016 | 2016-08-12 |
|
|
UNE-EN 61987-14:2016 | Industrial process measurement and control. Data structures and items for equipment cataloging. Part 14: Property lists for temperature measurement equipment for electronic data exchange (ratified by AENOR in September 2016). | EN 61987-14:2016 |
2016-07-22 | |
|
UNE-EN 62052-31:2016 | Electrical Power Measurement Equipment (c.a) .. General requirements, tests and test conditions. Part 31: Safety and Testing Requirements (Ratified by AENOR in September 2016). | EN 62052-31:2016 | 2016-06-17 |
|
|
UNE-EN 62325-451-2:2014/AC: 2016-08 | Framework for communications in the electrical market. Part 451-2: Recognition processes and contextual model for the European market (ratified by AENOR in September 2016). | EN 62325-451-2:2014/AC: 2016-08 | 2016-08-19 | |
| UNE-EN 62343-3-1:2016 | Dynamic modules. Part 3-1: Operating specification templates. Dynamic channel equalizers. (Ratified by AENOR in September 2016). | EN 62343-3-1:2016 | 2016-07-29 | |
| UNE-EN 62343-3-2:2016 | Dynamic modules. Part 3-2: Operating specification templates. Optical channel monitors. (Ratified by AENOR in September 2016). | EN 62343-2:2016 | 2016-07-22 | |
| UNE-EN ISO 19901-4:2016 | Oil and natural gas industries. Specific requirements for maritime structures. Part 4: Geotechnical design considerations and foundations. (ISO 19901-4:2016) (Ratified by AENOR in September 2016). | EN ISO 19901-4:2016 | 2016-08-10 | UNE-EN ISO 19901-4:2003 (Ratified) |
| UNE-EN ISO 80079-36:2016 | Explosive atmospheres. Part 36: Non-electrical equipment intended for explosive atmospheres. Basic requirements and methodology. (ISO 80079-36:2016) (ratified by AENOR in September 2016). | EN ISO 80079-36:2016 | 2016-04-06 | |
| UNE-EN ISO 80079-37:2016 | Explosive atmospheres. Part 37: Non-electrical equipment intended for explosive atmospheres. Non-electric type of protection for constructive safety "c", by control of ignition sources "b", by immersion in liquid "k" (ISO 80079-37:2016) (ratified by AENOR in September 2016). | EN ISO 80079-37:2016 | 2016-04-06 |
