Order Edu / 3152 / 2011, Of 11 Of November, By Which Is Sets The Curriculum Of The Cycle Training Of Grade Higher Corresponding To The Title Of Technical Superior In Aesthetic Integral And Welfare.

Original Language Title: Orden EDU/3152/2011, de 11 de noviembre, por la que se establece el currículo del ciclo formativo de Grado Superior correspondiente al título de Técnico Superior en Estética Integral y Bienestar.

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$20 per month, or Get a Day Pass for only USD$4.99.
The Royal Decree 881/2011, 24 June, establishes the title of technician in Integral aesthetics and well-being and minimum teachings, in accordance with the Royal Decree 1147 / 2011, July 29, which replaces the Royal Decree 1538 / 2006, of 15 December, which establishes the general management of the vocational training of the educational system which defines in article 9 the structure of professional training and specialization courses titles, taking as a basis the national catalogue of professional qualifications, the guidelines laid down by the European Union and other aspects of social interest.

Organic law 2/2006, of 3 may, education, provides, in article 6(4), that the educational administrations shall establish the curriculum of different teachings regulated by this law, which comprise the basics outlined in previous sections of the own article 6. Schools will develop and complete, where appropriate, the curriculum of the different stages and cycles in use of their autonomy, as set out in chapter II of title V of the Act.

The organic law 5/2002, of 19 June, qualifications and vocational training, provides, in article 10(2), that educational administrations, in the scope of their powers, they can expand the contents of the corresponding titles of vocational training.

He Real Decree 881 / 2011, of 24 of June, in its provision repealing only, repeals the Real Decree 198 / 1996, of 9 of February, by which is sets the curriculum of the cycle training of grade top corresponding to the title of technical upper in aesthetic, established to the amparo of it law organic 1 / 1990, of 3 of October, of management General of the system educational.

Of conformity with it earlier, and once the Real Decree 881 / 2011, of 24 of June, has set the profile professional of the title of technical Superior in aesthetic Integral and welfare, their teachings minimum and those others aspects of it management academic that constitute them aspects basic of the curriculum that ensure a training common and guarantee the validity of them titles in all the territory national now determine, in the field of management of the Ministry of education, expansion and contextualization of the contents of professional modules included in the title of senior technician in Integral aesthetics and well-being, respecting the professional profile of the same.

The needs of a market of work integrated in the European Union require that the teachings of training pay special attention to the languages of the countries members, incorporating them into its training offer. In this sense, this training cycle includes in the curriculum for training in English language, in response to the provisions of the Royal Decree 1147 / 2011, July 29, which replaces the Royal Decree 1538 / 2006, of 15 December, which establishes the general management of vocational training.

In addition, the curriculum of the training cycle is established since respect autonomy pedagogical, organisational and management of the centres that offer vocational training, promoting these teamwork of teachers and the development of plans of training, research and innovation in the teaching field and actions that promote the continuous improvement of the training processes.

On the other hand, professional training centres will develop the curriculum established in this order, taking into account the characteristics of the student body, with special attention to the needs of persons with disabilities.

Finally, it should be noted that this training cycle curriculum integrates scientific, technological and organizational established teachings aspects for students to acquire a global vision of the productive processes of the professional profile of the technician in Integral aesthetics and well-being.

In the process of elaboration of this order has issued report the Council School of the State.

For all of the above, in virtue, I HAVE: CHAPTER I General provisions article 1. Object.

This order is intended to determine the curriculum of the training cycle of top grade corresponding to the title of senior technician in Integral aesthetic and welfare established in Royal Decree 881/2011, June 24.

Article 2. Scope of application.

The curriculum established in this order shall apply within the territorial scope of management of the Ministry of education.

CHAPTER II article 3 curriculum. Curriculum.

1. the curriculum for the teaching of vocational training of the educational system corresponding to the title of senior technician in Integral aesthetics and well-being, established in Royal Decree 881/2011, from June 24, is determined in the terms set out in this order.

2. the professional profile of the curriculum, which is expressed by the general competence, professional, personal and social competences and qualifications and units of competence of the national catalogue of professional qualifications, is included in the title of technician in Integral aesthetics and well-being, referred to in the previous point.

3. the General objectives of the curriculum of the training cycle, the objectives of professional modules expressed in terms of learning outcomes and assessment criteria are included in the title of technician in Integral aesthetics and well-being, referred to in paragraph 1 of this article.

4. the contents of the professional modules that make up the present curriculum, adapted to the socio-economic reality as well as the prospects for economic and social development of the environment, are those set out in annex I of this order.

Article 4. Duration and sequencing of professional modules.

1. the total duration of the teachings relevant to this training cycle, including the professional training module in workplace, is 2,000 hours.

2. the professional modules of this training cycle, when they are offered on a face-to-face basis, will be organized in two academic years and shall be adjusted to the sequencing and weekly hourly distribution determined in annex II of this order.

3. the first academic year will take place entirely in the educational center. To be able to attend the second course, you will need to have passed the professional modules involving altogether, at least, eighty percent of the hours of the first course and, in any case, all the professional modules support included therein, designated as such in annex II.

4. ensure the right of registration of those who have completed a professional module in another autonomous community in the terms established in article 48.3 of the Royal Decree 1147 / 2011, July 29, which replaces the Royal Decree 1538 / 2006, of 15 December, which establishes the general management of the vocational training of the educational system.

5. in General, during the third quarter of the second year, and once achieved the positive assessment in all professional modules in the educational center, the professional training module will be developed in work centers.

6. exceptionally, and in order to facilitate the adjustment of the number of registered people to the availability of training posts in enterprises, approximately half of the second year students may develop module professional training in workplace during the second quarter of the second year, provided they have positively passed all the professional modules of the first academic year.

7. without prejudice to the foregoing, and as a result of the temporality of certain economic activities that can prevent the development of professional training module in workplace can conform to previous assumptions, this will organize in other periods coincide with the development of the economic activity of the professional profile of the title.

8. in any case, the evaluation of the professional training module in workplace will depend to the positive evaluation of the rest of the professional modules of the training cycle.

Article 5. Professional project module.

1. the professional project module has an interdisciplinary character and incorporates the technological and organizational variables related to the essential aspects of the professional competence of the title of technician in Integral aesthetics and well-being.

2. in General, this module will be taught by teachers who exerts the tutoring of training in workplace.

3. the professional module of project will be developed during the last period of the training cycle, combining the collective, and the individual tutoring so that at least 50% of the total length is carried out in person and complete with mentoring a distance in which information and communication technologies will be employed.

4. in any case, and before the start of the professional training module in workplace, responsible teachers must anticipate the teaching and learning activities that facilitate the development of the professional project module.

5. the evaluation of this professional module will depend to the positive evaluation of the rest of the professional modules of the training cycle, including training in workplace.

Article 6. Bilingual education.


1. the curriculum of this cycle training incorporates the language English of form integrated at least in two modules professional between which compose it all of the cycle training. These modules will be taught by teachers with teaching attribution in them and, in addition, having the linguistic qualification corresponding to level B2 of the common European framework of reference for languages.

2. in order to ensure that bilingual education is provided in two academic courses of the training cycle on an ongoing basis, professional modules of both courses will be chosen.

3. likely to be taught in English language modules are the designated annex III.

4. as consequence of it greater complexity that assumes the transmission and reception of teachings in a language different to the maternal, them modules professional taught in language English will increase your load time teaching, in three hours weekly for the joint of them modules that is impart in the first year and two hours for which is develop during the second course. In addition, teachers who impart these professional modules will be assigned, in your individual schedule, at least three hours a week to prepare. These hours will be the same character as the hours.

5. with character exceptional and of form transient until the year 2020, when the faculty with attribution teaching not count with the level of English demanded in these modules professional, will share a total of three hours weekly for the joint of them modules that is given in the first year and two hours for which is develop during the second course with a professor or a Professor of the specialty of English. In this course, the programming of these modules will include, at least, a unit of work or teaching to be held exclusively in English language and the rest of didactic units will incorporate given teaching and learning activities exclusively in English at the assigned time.

6. on an exceptional basis, and upon request, in the case of students or students with disabilities that may present difficulties in its oral expression (cerebral palsy, deafness...) easing measures and/or alternatives will be established on the requirement of delivery of modules in English language, in a way that can take all the teachings of the professional modules in their mother tongue.

Article 7. Spaces and facilities.

Them spaces and equipment that should meet them centres of training professional, to allow the development of them activities of teaching, are them established in the annex IV of this order and must meet it established in the article 11 of the Real Decree 881 / 2011, of 24 of June, as well as the normative on equality of opportunities, design for all and accessibility universal , prevention of occupational health and safety in the workplace.

Article 8. Qualifications and accreditation of requirements of the faculty.

1. the specialties of faculty with attribution teaching in professional modules that constitute the teachings laid down for the title referred to in article 1 of this order, as well as equivalent for the purpose of teaching qualifications, are pick-ups, respectively, in annexes III. To and III. B the Royal Decree 881/2011, June 24, which establishes the title of technician Integral aesthetics and well-being.

2. to ensure the compliance of the article 12.3 of the Real Decree 881 / 2011, of 24 of June, by which is sets the title of technical Superior in aesthetic Integral and welfare, for the teaching of them modules professional that it make up, is must accredit that is meets with all them requirements established in the cited article, providing the following documentation (: a) certified photocopy of the official academic degree required, according to the qualifications listed in annex III. (C) the Royal Decree 881/2011, June 24, cited. When linked with the professional module that you want to impart, the presented qualifications deemed that it encompasses the objectives of the module itself. Otherwise, in addition to the degree, the documents referred to in subparagraph (b) be provided) or c).

(b) in the event that want to justify that teachings leading to the qualification provided encompasses the objectives of professional modules that is intended to provide: • personal academic certification of studies, original or authenticated, issued by official site, stating the teachings taken detailing the subjects.

• The curriculum provided and completed by the person concerned, original or certified copy of the same, stamped by the University or corresponding official or authorized tuition Centre.

(c) in the event that is want to justify through it experience labor that, unless during three years, has developed its activity in the sector linked to it family professional, its duration is be credited through the document official exculpatory corresponding, to which is you added: • certification of it company u body employer in which record specifically it activity developed by the person interested. This activity has to be implicitly related to the learning outcomes of the professional module which aims to impart.

• In the case of those who work on their own, statement by the person concerned of the most representative activities related to learning outcomes.

CHAPTER III article 9 curriculum adaptations. Adaptation to the socio-productive environment.

1. the curriculum of the training cycle regulated by this order is established taking into account the socio-economic reality and the geographical, socio-productive and labor characteristics of the environment's implementation of the title.

2. them centers of training professional will benefit of it necessary autonomy pedagogical, organizational and of management economic for the development of the teachings and its adaptation to them features concrete of the environment socio-economic, cultural and professional.

3. them centers authorized for impart this cycle training will realized and will develop them measures organizational and curricular that are more appropriate to them features of its students and of their environment productive, of way flexible and in use of its autonomy pedagogical, in the frame general of the project educational, in them terms established by the law organic 2 / 2006, of education.

4. the curriculum of the training cycle regulated by this order will take place in educational programs or curriculum development, enhancing or creating the culture of prevention of occupational hazards in the spaces where be given professional modules, as well as promoting a culture of environmental respect, excellence in work, compliance with standards of quality, creativity, innovation gender equality and respect for the equality of opportunities, design for all and universal accessibility, especially in relation to people with disabilities.

Article 10. Adaptation to the educational environment.

1. the vocational training centres managed by the Ministry of education will develop the curriculum established in this order, taking into account the characteristics of the students and the environment, attending especially to persons with disabilities, in terms of accessibility and support resources needed to ensure that this student can study these teachings in the same conditions as the rest.

2. in addition, the teachings of this cycle will be taught with a flexible and open methodology based on self-learning and adapted to the conditions, capabilities and needs of students, so as to enable reconciliation of learning with other activities and responsibilities.

CHAPTER IV other offers and modality of these teachings article 11. Offer remote.

1. the professional modules offered to distance, when by its characteristics they required, ensure students the attainment of all the objectives expressed in the results of learning, through face-to-face activities.

2. the provincial directorates and the departments of education shall take the necessary measures and will give detailed instructions to centres authorized to deliver this training cycle in face-to-face mode, to start up and operation of the offer of the same distance.

3 authorised centres for imparting teachings of professional distance learning will have appropriate curriculum materials to be adapted to the provisions of the additional fourth provision of the organic law 2/2006 of 3 may, of education.

Article 12. Combined offer.

In order to respond to the needs and personal interests and give the possibility to combine training with work, with other activities or situations, the offer of these teachings for adults and young people in special circumstances can be combined between regimes of classroom teaching and distance simultaneously, provided the same modules in two modalities do not take at the same time.

Article 13. Offer for adults.

1. the modules professional of this cycle training associated to units of competition of the catalogue national of qualifications professional may be object of an offer modular destined to them people adult.


2. This training will be developed with an open and flexible methodology adapted to the conditions, capabilities and personal needs that allow them to reconciliation of learning with other activities and responsibilities, fulfilling the provisions of chapter I of title IV of the Royal Decree 1147 / 2011, July 29, which replaces the Royal Decree 1538 / 2006 of 15 December , by which is sets the management general of it training professional of the system education. In addition, this training will be capital to achieve a degree of professional formation, for which it will be necessary to prove the requirements of access.

3. with the aim of reconciling the learning with other activities and responsibilities, the provincial directorates and the departments of education may establish specific measures to fulfil the provisions of article 41 of the Royal Decree 1147 / 2011, July 29, which replaces the Royal Decree 1538 / 2006, of 15 December, which establishes the general management of the vocational training of the educational system and enable face-to-face bidding and distance at the same time.

4. to promote it training along the life, it address General of training professional of the Ministry of education may authorize to them addresses provincial and to them ministries of education the teaching, in them centers of its competition, of modules professional organized in units training of less duration. In this case, each result of learning, with their criteria of evaluation and its corresponding block of content, will be the unit minimum and indivisible of partition.

Provision additional first. Authorisation to impart these teachings.

Provincial and regional ministries of education processed authorization to the General Directorate of vocational training to be able to impart the teachings of this formative cycle of complete or partial form regime face-to-face and distance, of centres who request it and meet the requirements under the current legislation.

Second additional provision. Implementation of these teachings.

1 during the 2012-2013 will be implemented the first year of the training cycle which referred to article 1 of this order and will not impart the teachings of first course covered by organic law 1/1990 of 3 October, General Organization of the educational system, corresponding to the title of senior technician in aesthetics.

2. in the course 2013-2014 is will implement the second course of the cycle training to which makes reference the article 1 of the present order and leave of impart is them teachings of second course covered by the law organic 1 / 1990, of 3 of October, of management General of the system educational, corresponding to the title of technical Superior in aesthetic.

Third additional provision. Linguistic empowerment of teachers in bilingual education.

Teachers who go to provide teaching in English language must be in possession, before the date of beginning of each academic year, the corresponding linguistic empowerment, for which purpose the Ministry of education will conduct a habilitation procedure before the beginning of each course.

Fourth additional provision. Training of teachers of bilingual education.

Them addresses provincial and them ministries of education scheduled courses and activities of training in language English destined to all the Faculty of training professional that go to impart teaching in modules professional susceptible of be taught in language English, who will have the obligation of attend to them same until get the enabling required. These measures shall apply, at least until the year 2020.

(The training that is offers will be of three types: to) training intensive, through a course made, preferably in the mode face-to-face, during the month of September.

(b) formation of long-lasting throughout the school year, through a course that combines face-to-face form and online, which will be held outside opening hours of forced stay in the training centre. During the period of preparation of the professional training module in workplace, this course will intensify and will be held, if possible, between the hours of forced stay in the Center.

(c) training in English-speaking country, through courses, which possibly will include cultural visits to institutions and attendance at conferences, and to be held at the end of the year once completed school activities in the training centres.

Sole transitional provision. Substitution of titles related with these teachings.

1. the students that, to the end the course school 2011-2012, meets them conditions required for study the second course of the title of technical Superior in aesthetic, covered by the law organic 1 / 1990, of 3 of October, of management General of the system educational, and that not has exceeded any of them modules professional of the first course of the mentioned title, will be with two calls in each one of them two years successive for to overcome such modules professional. After that period, the school year 2014-2015 shall apply you the validations for the overmatched modules set out in article 15(1) of the Royal Decree 881/2011, of 24 June, which establishes the title of technician Integral aesthetics and well-being, regulated by the organic law 2/2006 of 3 may, education.

2. to students who at the end of the school year 2011-2012, not satisfying the conditions required to attend the second course of the title of technician in aesthetics, covered by organic law 1/1990 of 3 October, General Organization of the educational system, will apply you the recognition set out in article 15(1) of the Royal Decree 881/2011, June 24 by which establishes the title of technician in Integral aesthetics and well-being, regulated by the organic law 2/2006 of 3 may, education.

3. the students that, to the end the course school 2012-2013, not meets them conditions required to get the title of technical upper in aesthetic, covered by the law organic 1 / 1990, of 3 of October, of management General of the system educational, will be with two calls in each one of them two years successive for to overcome such modules professional, except for the module of training in Center of work for which is will have of a course school supplementary. To students who after that period had not obtained the title apply you the validations for the overmatched modules set out in article 15(1) of the Royal Decree 881/2011, of 24 June, which establishes the title of senior technician in Integral aesthetics and well-being, regulated by the organic law 2/2006 of 3 may, education.

First final provision. Application of the order.

Is authorizes to it address General of training professional, in the scope of their powers, to adopt them measures and dictate them instructions necessary for the application of it willing in this order.

Second final provision. Entry into force.

This order shall enter into force the day following its publication in the "Official Gazette".

Madrid, November 11, 2011.-the Minister of education, Ángel Gabilondo Pujol.

ANNEX I professional modules 1. Professional module: Aesthetic apparatus.

Code: 0744.

Contents: a) planning of the Organization's facilities and electrostatic equipment: electrical safety: systems and electrical safety standards.

Resistance power of the body human.

Installation requirements for emission of electromagnetic radiation techniques: covering materials and reflective surfaces.

Distribution of the cabin.

Installation requirements apply techniques of tanning.

European, national and regional regulations on appliances by UV radiation.

Standards for aesthetic apparatus: requirements for equipment used in electrotherapy.

Manufacturing requirements.

Measures of hygiene, disinfection and sterilization: application of cleaning, hygiene, disinfection and sterilization methods for equipment, materials, and helpful employees in processes of electrotherapy.

Criteria of storage of useful and accessories.

Use and storage of sterilized material.

(b) characterization of the electrotherapy equipment: classification of the electrical currents with application in aesthetics: galvanic current and variable currents.

Techniques based on the application of electrical currents with application in aesthetics: galvanic current: definition, scientifically, physiological effects, CG, precautions and contraindications, application in aesthetics (ionization, descaling, electroplating and electrolysis).

Variable low frequency currents: definition, classification, physiological effects, applications in aesthetics (electrolifting, lypolysis, current excitomotrices, isotonic passive gymnastics and running and isometric TENS, among others), parameters, precautions and contraindications.

Variable medium frequency currents: definition, classification, physiological effects, applications in aesthetics (Interferential currents and Kotz currents, among others), indications, precautions and contraindications.


Variable high frequency currents: definition, physiological effects, applications in aesthetics (currents of D, Ansorval, currents of Diathermy, shortwave and capacitive Diathermy), precautions and contraindications.

Technical based on the application of heat and of cold: thermotherapy: concept, effects physiological, indications, applications in aesthetic (blankets electric, termoforos and caporal, among others), precautions and contraindications.

Cryotherapy: concept, physiological effects, indications, applications in aesthetics (cold bandages, cooler stones and cryotherapy, among other teams), precautions and contraindications.

The application of electromagnetic radiation-based techniques: introduction to electromagnetic radiations: physical basis, classification and electromagnetic radiation with application in aesthetics.

Wood's lamp: description, instructions for use, indications and precautions.

GRAPE solar lights: solar radiation, emitting devices from UV rays, indications, precautions and contraindications. Legal regulations.

Laser: characteristics of the radiation laser, types of laser, effects, indications, techniques of application, dosimetrias, precautions and contraindications. The application of laser safety.

Radiation infrared: types, application in aesthetics (lamps and thermolipolisis, among others), indications, precautions and contraindications.

Techniques of mechanotherapy: vibrators: description of equipment, effects and indications, rules of application and contraindications.

Ultrasound: Foundation physical equipment of ultrasonic, effects and indications, standards, precautions and contraindications.

High frequency (ultrasonic peeling) microvibrators: physical basis, indications, used equipment, safety standards, way of use and contraindications.

Brossage: teams employees, effects, indications, mode of employment, standards of safety and contraindications.

Compressor: description of the equipment, sprays (effects, indications and mode of employment) and suckers (effects, indications, rules of use, precautions and contraindications).

Pressotherapy: Foundation physical effects, indications, technique application and parameters, precautions and contraindications.

Vacuum therapy and dermoaspiracion: Foundation scientific, effects, parameters, indications, precautions, contraindications and technique of application.

(c) preparation of electrotherapy equipment: choice of technique of electrotherapy: selection criteria.

Analysis of the equipment.

Review and maintenance of safety equipment.

Accessories.

Recognition and selection of accessories, utensils and cosmetics.

Regulation of parameters.

(d) Organization of application of electrotherapy techniques: technical documentation. Technical manuals. Tab technical and consent informed.

Collection and management of data from the user.

Development of the Protocol according to the selected technical electrotherapy.

Preparation of the work area: preparation of equipment, accessories and cosmetics needed.

Adjustment of parameters and dosimetrias.

Preparation of the user: accommodation and the previous operations.

Analysis of the State of the skin and possible alterations.

Practical implementation: phases and precautions: electrical currents-based techniques.

Techniques of application of heat and cold.

Techniques based on electromagnetic currents.

Techniques of mechanotherapy.

Combined appliances. Synergism and antagonism between the techniques.

Withdrawal of equipment and accessories.

Supervision of the process and collection of incidents.

(e) characterization of the new appliances aesthetic: new equipment in aesthetic: technical of Electroporation, radiofrequency and Mesotherapy virtual, among others.

Analysis of the characteristics: Foundation Science.

Description of the equipment.

Rules of application and dosimetrias.

Effects and indications, precautions and contraindications.

(e) assessment of risks in the application of techniques of electrotherapy: main accidents in the cabin of electrotherapy.

Accidents produced by teams based in the application of current, by thermotherapy and cryotherapy, by radiation electromagnetic and mechanical.

Prevention of accidents and form of acting against them themselves.

2. module Professional: aesthetic hydrothermal.

Code: 0745.

Contents: a) the facilities, technical and professional resources organization: technical hidroesteticas application centres: spas: features, Spa environment and Spa cure.

Thalassotherapy centres.

Spa establishments: classification.

General facilities of hydrothermal settlements: professional facilities (individual and collective areas).

Additional facilities (reception, changing rooms and warehouse, among others).

Design and distribution of facilities and technical resources.

Professional resources for hydrothermal centres: organigram.

Formation and functions of hydrothermal centres professionals.

Organisation and distribution of work.

(b) characterization of water resources: water as a source of health and well-being. History of the balneotherapy and hydrotherapy. Topicality of the thermal sector: spas: general concepts (hydrotherapy, crenotherapy and medical hydrology, among others).

Water: structure and properties. Hydrogeology: the water cycle. Mechanism of action of water: hydrotherapy mechanisms. Types of waters.

The medicinal water: composition and classification according to its origin, its temperature, its global mineralization and the chemical composition of the mineral content.

Mechanism of action of the medicinal water: mechanisms certifying, indications on the basis of its composition.

Internal application of mineromedicinal water forms: oral (hydropinic cure), airway and special way.

Applications in aesthetics.

Sea water: composition and characteristics (organoleptic, salinity, specific heat, freezing point, density, viscosity and gases in solution).

Mechanism of action.

Application in aesthetics.

(c) identification of the needs of the user in the service of hydrothermal: importance of analysis in hydrothermal treatments.

Recognition of indications and aesthetic alterations of interest in the application of hydrothermal techniques. Contraindications.

Practical implementation of aesthetic analysis: methodology for the diagnosis: interview, exploration, collection of data, specs technique and information to the customer.

Application of equipment and media techniques.

Completion of the informed consent and reporting of referral to other professionals.

Preparation of documents for the detection of needs of users.

Application of standards conduct.

(d) selection of technical of application of water: technical of theOpen: types: bathrooms, baths with additives, baths with mobilization of the water (baths of hydromassage and baths of bubbles).

Mechanism of action, effects, indications, precautions and contraindications.

Facilities collective for the bath: pool therapeutic and pool of relaxation, among others.

Techniques of application of water with pressure: types: showers, jets to pressure and technical combined (massage underwater and massage under shower).

Mechanism of action, effects, indications, precautions and contraindications.

Facilities group with pressure: jacuzzi and devices for pools dynamic.

Applications hydrotherapy partial: types: ablutions and affusions; wraps, compresses and promotions; baths partial and cure of Kneipp.

Mechanism of action, effects, indications, precautions and contraindications.

Antroterapia: Types: sauna, baths and stove, stove dry or steam bath.

Mechanism of action, effects, indications, precautions and contraindications.

Combination of techniques of hydrotherapy: thermal circuits.

Thalassotherapy and associated techniques: marine climate, heliotherapy and psamoterapia.

(e) selection of thermal cosmetics: clays: concept, composition, types, properties, actions, application techniques, indications and precautions.

Peloids: Definition, composition, properties, international classification, actions, application techniques, indications and contraindications.

Hot Springs as a cosmetic: concept, actions, and application in aesthetics.

Paraffin and parafango: composition, effects, mode of application, indications, precautions and contraindications.

Wine therapy, chocolate therapy and other treatments (olive and cherrytherapy, among others): properties, effects and indications.

Algotherapy: Algae: composition, types, production, effects, indications and application techniques.

Other marine products (plankton, cartilage fish, Roe, marine DNA, powder pearls and salts, among others).

Massage of salts.

Aromatherapy: concept, oils essential (composition, obtaining, ways of penetration, effects, form of application, precautions and actions cosmetic).

(f) application of technical hydrothermal: procedures of application of technical hydrothermal: procedures of application of techniques of theOpen: objectives, media technical, clothing, parameters (temperature, times and pressure, among others), sequencing of the technical and manipulations. Implementation practice.

Procedures of application of techniques of application of water with pressure: objectives, media technical, clothing, parameters (temperature, times and pressure, among others), sequencing of the technical and manipulations. Implementation practice.


Procedures for implementing partial hydrotherapy techniques: objectives, media technicians, clothing, parameters (temperature, time and pressure, among others), sequencing technique and manipulation. Practical implementation.

Procedures of application of antroterapia techniques: objectives, media technicians, clothing, parameters (temperature, time and pressure, among others), sequencing technique and manipulation. Practical implementation.

Procedures of application of cosmetics thermal: objectives, techniques of application, sequencing of the technical and manipulations. Practical implementation.

Treatment combination of techniques of hydrotherapy and cosmetics thermal. Types of treatments. Technical execution.

Protocols of application of techniques on thermal circuits: sequencing and work system.

(g) Organization of the implementation of safety and hygiene protocols: bacterial contamination of the water. Analysis of techniques of treatment of water used in these centers.

Hygiene of the premises: cleaning Protocol. Standards of hygiene for users and professionals.

Storage and handling of cosmetic products.

Organization of the maintenance of facilities and equipment.

Environmental management: saving energy and water. Waste management.

Occupational hazards in hydrothermal centres. Prevention techniques.

Signage, emergency and first aid.

Hydrothermal centres regulations.

(h) evaluation of the quality of workplaces and hydrothermal services: concept and principles of quality.

The quality in the provision of the service.

Quality standards for facilities, technical resources and products. Parameters that define it.

Techniques for measuring the degree of satisfaction of the clientele.

3. professional module: Advanced waxing.

Code: 0746.

Contents: a) preparation of the working environment. Measures of prevention of risks: the waxing cabin: features and design. Liners.

Distribution, lighting, atmosphere and furnishings.

Organization of tasks and resources. Team work.

Hair removal services: classification of methods of removing hair by pulling, destruction of the dermal papilla and others. Study of the new trends in hair removal.

Management of documentation. Aesthetic history. Technical details of hair removal. Report referral to other professionals. Informed consent.

Measures of prevention of risks in mechanical and advanced waxing techniques: techniques of postural hygiene in hair removal processes.

Criteria for selection and use of measures of protection of the user and the Professional: the EPI. The maintenance of equipment.

Application of methods of cleaning, hygiene, disinfection and sterilization for equipment, materials, and helpful employees in hair removal processes. Use and storage of the material.

Action front accidents: implementation of protocols in case of accident.

Environmental management: application of the rules of management and storage of waste.

European, national and regional legislation on depilation appliances.

(b) selection of methods of hair removal mechanical and advanced: application of protocols of reception and attention to the client: the skills social for the interviews.

Aesthetic analysis of the skin: recognition of alterations of the skin and hairy with impact on the epilation process. Hirsutism. Hypertrichosis.

Determination of phototypes and photo-etnotipos skin for laser hair removal techniques.

Application of techniques of identification of demands and needs of the users.

Selection criteria of the depilatory method in function of the anatomic area that is being treated, aesthetic analysis and the needs and demands of the customer. Indications and contraindications.

Design of working procedures of mechanical, electrical follicular insertion, laser hair removal laser and pulsed light hair removal.

(c) technical execution of mechanical removal: preparation of materials and the cabin: appliances. Wax melters.

Useful and lingerie.

Criteria for the selection and use of cosmetics before, during and after waxing.

Preparation and lodging of the user.

Prior to mechanical hair removal techniques: preparation of the zone that is being treated.

Execution of the given technique: work process. Specific sequencing depending on the technique to be applied. Indications. Parameters.

Realization of hair removal with tweezers.

Realization of hair removal with wax.

Care post-depilation.

Professional advice.

(d) technical execution of electrical depilation: preparation of materials and the cabin: equipment used in electrical depilation: DC (electrolysis), variable (thermolysis and flash), current (blend), anaphoresis, combined currents of high frequency d´Arsonval. Parameters. Dosimetry.

Provision of furniture and lighting in the area.

Material and needle depilation: types and features. Importance of the use of disposable and removing the needle in conditions of safety and hygiene.

Cosmetics for before, during and after waxing: criteria for the selection and use.

Preparation and lodging of the user. Ergonomic material.

Techniques prior to the electrical depilation by follicular insertion: preparation of the area to be treated.

Criteria of selection of antiseptic products.

Execution of the given technique: selection of parameters and dosimetry. Sequencing depending on the technique to be applied. The channeling of the needle: angle of tilt and depth.

Care post-depilation.

(e) technical execution of photoepilation: previous recommendations.

Preparation of the material and the cabin: Photo hair removal equipment: laser and pulsed light. Parameters. Dosimetry. Applications under supervision.

Cosmetics for before, during and after waxing: criteria for the selection and use.

Preparation and lodging of the user. Completion of the documentation.

Prior to selective photothermolysis techniques: preparation of the zone that is being treated.

Criteria for the selection of products.

Application of security measures.

Execution of the given technique: selection of parameters and dosimetry. Specific sequencing depending on the technique to be applied. Application of methods of skin cooling.

Care post-depilation.

(f) evaluation of hair removal service: parameters that influence the quality of the service of hair removal.

Analysis of deviations in mechanical and advanced hair removal treatments.

Methods of measurement of the degree of customer satisfaction.

Application of techniques of attention to complaints and claims.

Corrective measures in the process of hair removal.

Post-service of hair removal advice.

4. professional module: Aesthetic massage.

Code: 0747.

Contents: a) features of the massage techniques: origin, evolution and concept of massage: massage schools and authors. Differences between aesthetic and therapeutic massage.

Criteria for classification of massages depending on the means used, effects, technique, origin, provenance and area of application and alteration, among others.

Current trends of aesthetic massage: Swedish, therapeutic massage, sensory (sensory, integral and Californian) massage, Sambucy, Vogler, holistic with volcanic rocks, metamorphic, ayur-veda, reiki, massage gestalt and other massages.

Aesthetic massage basic maneuvers: classification of manoeuvres: bloom, rubbing, friction, pressure, kneading, pellizqueos, percussions and vibrations.

Description.

Parameters for the realization of the maneuvers: direction, intensity, rhythm, number and time.

Sequencing.

Technique of preparation.

Effects of massage on the body. Indications and contraindications.

(b) diagnostic aesthetic in the massage: analysis of the documentation technical to massage. History aesthetic, tab technical and consent informed.

Application of techniques of communication with them users and others professional: techniques to detect them demands, needs and expectations of the user.

Communication with other professionals.

Application of the procedure of analysis aesthetic in the processes of massage: application of methods of analysis aesthetic prior to the massage.

Identification of the area that is going to treat: identification of alterations aesthetic or pathological that influence in the massage.

Precautions.

Design and development of procedures of work of massage: description of the process. Materials and media. Sequencing and timing. Counseling professional.

(c) preparation of the space of work: adaptation of the booth of massage: features basic of the cabin of massage: conditions environmental, temperature, lighting, furniture and equipment.

Hygiene and maintenance.

Preparation of the Professional: exercises preparatory.

Ergonomics. Preparation of the hands.

Image of the professional. Hygiene personal and wardrobe.

Accomodation and preparation of the user: positions anatomical appropriate to the massage.

Cosmetics: selection criteria for the application of the massage.

(d) completion of manual-aesthetic massage: aesthetic facial massage protocol: standard protocol adapted to the type of massage (relaxing, reaffirm, circulatory, preoperative, postoperative decongestant and penetration of products, among others): purpose.

Characteristics of the technique.


Criteria of selection of the manoeuvres.

Parameters.

Sequencing.

Effects of massage on each zone (reflexes, immediate and delayed).

Precautions in case of functional and structural alterations (acne, changes in secretions, localized adipose accumulation, skin or muscle relaxation and wrinkles, among others).

Execution.

Protocol of massage aesthetic body: adaptation of the Protocol standard to the type of massage (relaxing, firming, circulatory, decongestant, toning, firming, Modeler, preoperative, postoperative, pregnancy and postpartum, among others): purpose.

Characteristics of the technique.

Criteria of selection of the manoeuvres.

Parameters.

Sequencing.

Effects of massage on each zone (reflexes, immediate and delayed).

Precautions in case of alterations functional and structural (circulatory, cellulite, obesity, relaxation skin or muscle and tension muscle located, among others).

Execution.

Areas of the body that require caution.

(e) implementation of techniques associated with massage: breathing techniques: characteristics, effects, indications and application techniques. Classification: Diaphragmatic breathing.

Breathing sack.

Clavicular breathing.

Breathing full.

Rhythmic breathing.

Stretching and mobilizations: techniques, benefits, contraindications and precautions. The position of the hands.

Description of the positions of the client and the professional.

Integration of these techniques into the massage.

(f) application of technical sensory: application of aromatherapy in protocols of treatments aesthetic and activities associated: criteria of selection of oils essential and plant aromatic.

Methods direct and indirect of application of products of aromatherapy in treatments aesthetic: manual, vaporizers, stands impregnated, baths and compresses, among others.

Music therapy: music and aesthetics: influence of the music on the organism.

Importance of the influence of the music in the setting of cabins professional.

Types of melodies: conditional, relaxing, intermediate and stimulating, among others.

Musical selection criteria.

Criteria and parameters for the application of the melodies.

Application in aesthetic treatments and associated activities.

Chromatherapy: Use of colour for aesthetic purposes. Effects and indications. Introduction in aesthetic protocols.

Chromotherapy appliances. Parameters selection and application of Chromotherapy techniques criteria: environmental, punctual, sweep and bathroom.

Cosmetic products associated with color.

Use of accessories in the massage: types: pindas, stones and hot towels, among others.

Indications.

Criteria for the Association to beauty treatments.

(g) implementation of quality standards: parameters that define the quality of the massage processes: quality in aesthetic massage services. Evaluation and quality control. Questionnaires of contrast.

Deviations in the provision of aesthetic massage services.

Professional ethics.

Techniques of resolution of complaints and claims.

Counselling professional and proposals of other treatments. Treatments aesthetic associated to the massage: electrotherapy, technical cosmetic, technical hydrothermal, Chromotherapy and music therapy.

5. module Professional: drainage aesthetic and technical by pressure.

Code: 0748.

(Content: to) design of procedures of drainage aesthetic and technical by pressure: the drainage aesthetic: evolution historical. Differences fundamental with the massage classic. Terminology.

Lines dividing and quadrants lymph.

Effects of aesthetic lymphatic drainage on the different bodies, appliances and systems: immediate and delayed, local and remote.

Indications and contraindications absolute and relative of aesthetic drainage.

Massage by pressure: classification: shiatsu, acupressure, reflexology, Lomi-Lomi (Hawaiian), Thai (Thai), Balinese, zen and other massages. Basic principles. Similarities and differences.

The points of power and reflex zones. Localization and exploration of channels and points of energy methods: location of the tsubos or energy points; energy lines or meridians and organs that affect you. Methods of location and exploration of various reflex areas: face, hands, feet, ears and spinal column, among others.

Effects, indications, and contraindications.

Design and development of working procedures in aesthetic drainage and pressure techniques: description of the process, materials and media, sequencing, timing and professional advice.

(b) realization of aesthetic analysis: aesthetic study on the process of massage: aesthetic diagnosis methods prior to the massage.

Identification of the area to be treated: identification of aesthetic or pathological alterations that influence different massages.

Data collection. Communication techniques: techniques to detect the demands, needs and expectations of the user. The technical data sheet.

Communication with other professionals.

Completion of the technical documentation.

(c) Organization of the workspace: adequacy of the massage cabin: basic massage cabin and technical characteristics pressure: environmental conditions, temperature, lighting, furniture and equipment.

Hygiene and maintenance.

Preparation of the Professional: image of the professional. Personal hygiene and clothing.

Concentration and relaxation techniques.

Preparation of the hands.

Ergonomics.

Postural hygiene.

Accommodation and preparation of the user. Anatomical positions suitable for massage.

(d) implementation of aesthetic drainage manual: Fundamentals of technique. Application guidelines.

Maneuvers. General characteristics: types: outcrops, fixed circles, bulges, Rotary givers, combined, towing and draining lymph node. Application simultaneous and alternating.

Criteria of selection.

Parameters of the different maneuvers of DLM: direction, intensity of pressure, speed and time. Criteria of selection.

Organization of the execution: areas of treatments prior of the different parts of the body in DLM.

Maneuvers preparatory and zonal of DLM.

Procedure and sequence zone of the DLM: order basic of the sequences. Precautions. Contraindications.

In implementing precautionary measures.

Further to the massage advice.

Application of techniques of lymphatic drainage treatment post-medicina and cosmetic surgery: aesthetic indications and effects of the DLM in medical-aesthetic treatments.

Post traumatic disorders related to medicine and cosmetic surgery that may be treated with DLM.

Indications, precautions and relative and absolute contraindications in the application of these techniques.

The realization of DLM's most frequent errors.

(e) execution of pressure massage techniques: massages on reflex zones: maneuvers. General characteristics. Types (pressure with Polish, circular pressure and time pressure, among others). Criteria of selection of the manoeuvres.

Parameters that define the different types of pressures: address, intensity, shape, time, positions (of the fingers, hands and forearms) and direction of the lines.

The executing organization. Determination of the starting zone. Identification and location of specific reflex zone that must be handled after analysis.

Procedure and repeating sequence of manoeuvres: basic order of the sequences.

Precautions in the application.

Further to the massage advice.

Reflexology in the cosmetic procedures: zonal Division of the foot: vertical and horizontal areas, the reflex points and cross points.

Immediate and delayed effects of the reflex massage on different areas of the body.

Execution of the technique of reflexology for aesthetic purposes according to guidelines of the reflex massage pressure.

Realization of techniques of massage Oriental: accommodation: criteria of selection of the support right (tatami and futon, among others).

Exploration of the area by the observation of points key.

Selection of the technical respiratory for before and during the massage.

Maneuvers: features General. Criteria of selection of the manoeuvres. The positions of the fingers, the hands, the forearms and the body.

Parameters that define the different types of pressures: address, intensity, tension, rhythm, time and address of the lines.

Organization of the execution. Definition and location of the area and points of treatment that there is that handling after the analysis. Procedure and repeating sequence of manoeuvres. Precautions in the application.

Advice back to the massage. Frequency of the sessions. Evaluation of the inclusion of technical partner.

(f) Control of results in the processes of drainage aesthetic and technical by pressure: parameters that define the quality of them processes of drainage lymphatic manual and technical by pressure: satisfaction of the customer.

Evaluation and control of quality.

Questionnaires of contrast.

Deviations in the provision of the services of drainage aesthetic and technical by pressure.

Ethics professional.

Resolution of complaints.

6. professional module: micropigmentation.

Code: 0749.

Contents: a) elaboration of documentation: current legislation: European, national, regional and municipal affecting micropigmentation procedures.

Technical, legal and commercial documents.

Analysis of the model of informed consent: identification data.


Generic name of the technique and anatomical location.

Description of the technique.

Duration in time.

Information on options for disposal.

Hygiene measures.

Measurements prior and subsequent to the implementation of the technique.

Possible complications and precautions. Contraindications.

Budget.

Accreditation of the degree of maturity.

Datasheet: photographic documents.

Commercial information of the customer.

Completed registration.

Documentation of management of waste.

Credentials through certifications by approved bodies: sterilization programs by competent technical service, programs of disinfection, disinsectization and deratization.

Management of files.

(b) Organization of micropigmentation booth: characteristics of facilities: General characteristics, design and materials of walls, floors, lighting, atmosphere and furniture.

Distribution of facilities: the areas of work, reception and waiting.

Cleaning, disinfection, sterilization and storage.

Toilets.

Equipment and instruments for use in micropigmentation.

Machine dermografica: features and parameters (power and speed).

Needles: types and features.

Complements and accessories auxiliary.

Safety and hygiene of facilities and equipment: procedure of performance for the maintenance and hygiene.

Guidelines specific to disinfect linens and non-disposable material.

Protective measures against risks related to exposure to biological agents of the applicator staff.

Criteria for selection of methods of hygiene and disinfection before, during and after application.

The first aid kit.

Storage of specific products and waste management.

(c) design of corrective makeup: study of the morphology of the face. Visage: analysis and study of the face and the corrections of the same design technique: theories of the vertical and horizontal.

The oval: geometry, proportions and lines. Classification and types of ovals.

Study of the features of the face: eyebrows, eyes, lips, forehead, nose and Chin.

Study of other areas of the body likely to be micropigmentadas: proportions and symmetry of the breasts and areolas.

Study of the natural implementation of the hair and the balding areas.

The color: theory of the color. Theory of light.

Identification of the alterations skin related with the micropigmentation.

Corrections design: drawing for corrections techniques: line, shape, volume and color, hair to hair, eyebrows, compact in two colors and gradients.

Designs in templates of different facial and body areas.

Application of corrective make-up on the skin: criteria for selection of utensils and cosmetics. Preparation of the skin. Selection of drawing technique.

(d) preparation of the user: information the operator of micropigmentation technique: measures of care and communication to the customer.

General data: characteristics of the application and materials used.

Hygiene measures.

Contraindications, warnings about possible risks, alterations that not allow the realization of the micropigmentation, reactions of the skin to the implantation of the pigment.

Techniques of depigmentation: laser and surgery, among others.

Techniques prior to the microscale siting of pigments. Determination and sequencing: analysis, photography on and design of makeup corrective.

Preparation of the cabin, the material and the equipment.

Measures of preparation and protection of the user. Ergonomics.

Criteria of choice of the color according to the analysis prior.

(e) preparation of the micropigmentation: indications and precautions.

Pigments and dyes: characteristics, applications, excipients, packaging and labelling.

Selection criteria. Colorimetry adapted to pigments for micropigmentation.

Reactions of the pigment with different external agents (laser, solar radiation, interaction with cosmetics and medicines, among others).

Preparation of mixtures. Criteria for the handling of pigments. Application of the test of color pigment.

Needle selection criterion.

Micropigmentation techniques. Paths: grated, stippling and filling.

Parameters that define the different types of paths: direction, motion and pressure technique.

The executing organization: determination of the starting zone.

Disinfection and topical anaesthesia in the area. Advantages and disadvantages.

Procedure and repeating sequence of manoeuvres. Precautions in the application. Retouching technique.

Completion of documentation and photographic attachments, initial and final.

Advice post-microscale siting.

(f) quality of the process: parameters that define the quality of micropigmentation processes: customer satisfaction.

Evaluation and quality control.

Questionnaires of contrast.

Deviations in the provision of services of micropigmentation.

Techniques for measuring the degree of satisfaction and detection of deviations in the provision of services.

Techniques for solving complaints and claims.

Established protocols and use of technical language.

7. professional module: Physiological and hygienic in personal image processes.

Code: 0750.

Contents: a) determination of hygienic and sanitary norms in processes of aesthetics: levels of disinfection: disinfection and sterilization methods.

The disinfection of the cabin area.

Protocols in the cleaning, disinfection and sterilization facilities, furniture, lingerie, tools and accessories. Sanitary conditions of the establishments of personal image.

Guidelines that there is that follow for the prevention of the pollution.

Control of quality of these processes. Care and conservation of the material sterile.

Agents contaminants: classification of the micro-organisms.

Mechanisms of transmission.

Infections and infestations.

System of Defense and immune: barriers: defenses external and internal.

Types of immunity.

Organization of the immune system. Response immune and immunity. Disorders of the system immune with impact on the processes of image personal: the allergies.

The vaccines.

The inflammation.

Programs of vaccination required in aesthetic.

Regulations associated with the scope of the aesthetic. Legislation hygienic-sanitary associated with these processes. Prevention of legionellosis. Conditions higienicos-sanitarias of those establishments of application of tattoos, micropigmentation and piercing.

Waste management: concept, typology and waste control.

Specific PPE of aesthetics.

(b) characterization of the general anatomical structure of the human body: general structure of the human body. Regions and areas of the body. Anatomical positions. Drawings and anatomical axes. Terms of relationship or directions in space. Terms of movement.

Anthropometry. Shape, overall appearance and body proportions. Constitution of the body: factors that it determines (hereditary and environmental).

Somatotypes or types constitutional. Variable anthropometric: weight, size, perimeter, folds skin and scale. Anthropometry and image personal.

(c) identification of guidelines nutritional healthy: the foods and their nutrients: types and function of nutrients.

Needs and water and nutritional recommendations.

Table of food composition.

Biochemical processes of nutrition.

Diet: balanced nutrition. Alternative diets.

The diet and its relation with aesthetics.

Functional foods.

Aesthetic pathophysiology related to feeding: Obesity and thinness.

Lipodystrophies.

Changes in eating behavior: anorexia and bulimia.

Imbalance of nutrients and their relationship with the skin and its annexes.

Anatomy and physiology of the digestive system. Structure. Analysis of the process of digestion. Influence of alterations of the digestive processes of personal image.

Anatomy and physiology of the respiratory system. Structure. The breathing: bases physiological. Influence of the apparatus breathing in those processes of aesthetic. Technical breathing and massage. Alterations respiratory with impact on the processes of aesthetic.

Anatomy and physiology of the apparatus excretory system. Structure. Analysis of the process of formation of urine. Influence of the alterations of the device renal and urinary in those processes of aesthetic.

(d) relationship of the aesthetic processes with the musculoskeletal system: ergonomics applied to aesthetics: postural hygiene.

Pathology related to posture in aesthetic practices.

Postural corrections.

Skeletal system: the skeleton: composition and structure. The bone tissue. Functions of bones. The joints. Classification of bones.

Ossification. Hormonal control. Metabolism of the calcium.

System muscle: the muscles: composition and structure. Criteria of classification of the muscles. Actions and movements muscle. The origin and insertion of the muscles. Tissue muscle. The fiber muscle.

Location of muscles in the body human.

Physiology muscle: mechanism of the contraction. Physiology of the movement.

Processes aesthetic associated with the unit locomotive.

Pathology of the apparatus locomotive related with the aesthetic.

(e) the internal environment and characterization of the circulatory system in relation to the aesthetic processes: Anatomo-physiology of the circulatory system: cardiac cycle.

Fundamental principles of the movement.

The venous return.

Cardiac parameters.


Influence of pathologies in aesthetic treatments.

Blood: blood tissue: cells and plasma. The Hematopoiesis.

Parameters blood.

Functions of blood.

Coagulation.

Influence of the pathologies in those treatments aesthetic.

Lymphatic system: Anatomy and Physiology: vessels, lymph nodes, lymph nodes chains and lymphatic organs.

The lymph.

Factors influencing the lymphatic circulation.

Influence of the lymphatic system in the aesthetic processes.

Internal environment: body fluids: regulation and composition in different spaces. Exchange capillary.

Hemodynamics: factors that influence the dynamics of the body fluids.

Influence of those treatments aesthetic in the apparatus circulatory: actions of those technical mechanical, electroesteticas and cosmetic. Classification of the effects.

Influence of the temperature and pressure in the vascular system.

(f) recognition of the structure and function of the systems of control and integration: nervous system: Organization and structure: cells of the nervous system. Those nerves.

The transmission neuronal. The neurotransmitters. Analysis of inhibitors of the transmission nerve in aesthetics (toxin botulinum and pentapeptidos).

Autonomic nervous system. Concept of metamera-dermatome and their relationship with the processes of aesthetic.

Sense organs: the sensory receptors: classification and response mechanism.

The senses: types, Anatomy and physiology. Its influence on sensory therapies.

System endocrine: Organization glandular.

The hormones. Hormone physiology.

Regulation of secretion. Influence of hormones on the skin and annexes.

(g) establishment of guidelines for counselling in habits healthy: concept of health.

Influence of habits of life in personal image.

Primary prevention and health promotion method: collective action: health promotion campaigns and its implications for personal image.

Individual measures.

The impact of cancer and cancer treatments in personal image. Etiology. Facilitating factors and triggers the onset of cancer. Cancer and life habits. Measures of prevention.

The aging body: changes of the body shape throughout life.

Physiology of aging. Modifications in the different body structures. Causes.

Relationship between the ageing and the styles of life.

The advice in habits healthy: evaluation of those habits healthy.

Recommendations on power, exercise physical, sleep, hygiene personal and other elements that affect in the image aesthetic.

8. module Professional: Dermoestetica.

Code: 0751.

(Content: to) management of the documentation: documentation used: tab technical and commercial of the customer.

Information technique of equipment, devices and cosmetics used.

Specialized books and magazines.

Documentation online.

Standardized protocols.

Reports issued or received from other professionals.

Manual of hygiene, disinfection and sterilization techniques.

Ethical standards.

Generated documentation: aesthetic background, technical, artistic and commercial customer card.

Custom protocols.

Informed consent.

Reports issued to other professionals.

Evaluation of service sheets.

Documentation provided to the customer.

File systems.

Current legislation in the sector: environmental protection.

Prevention of legionellosis.

Control of effluent, waste and emissions.

Health and hygiene conditions of the establishments where placement of tattoo, micropigmentation, skin piercing and other similar techniques of body art.

Artificial tanning.

Legislation on cosmetics, tools and appliances.

Accreditation of compliance with existing regulations.

Quality Protocol: elaboration of the quality plan.

Application of the criteria in all phases of the process.

Techniques for correcting deviations.

Treatment of complaints, suggestions and complaints.

(b) selection of means and equipment for facial and body analysis: means and equipment for facial analysis: description, features, instructions for use, indications, precautions and selection criteria.

Types. Magnifying glass. Light wood. Gauge the degree of hydration. Sebometro. Peachimetro. Analyzer facial. Microcamera.

Means and equipment for the analysis body: description, features, rules of use, indications, precautions and criteria of selection.

Types. Tape measure. Catalogs. Scale. Scale analysis. Thermography. Meter of the adipose panniculus. Scanner body. Equipment computer and other technical not invasive.

Maintenance, safety and hygiene in the equipment of analysis.

(c) characterization of the skin and its alterations: microscopy of the organ skin: structure anatomical of the skin: epidermis, dermis and hypodermis.

Annexes cutaneous: corneal, vascular, nervous and glandular.

Physiology of the body skin. Keratinization and melanogenesis. Growth and repair of the skin and annexes. The healing.

Functions of the skin: protective, immune, thermoregulatory, sensory, metabolic and aesthetic.

The skin flora.

Macroscopic appearance of the surface of the skin. External features. The microrelief. Mechanical properties.

Cutaneous permeability. Hydrolipidic: composition and functions. Hydration of the skin.

Skin type. Criteria of classification. Physiological characteristics and properties of skin types. Evolutionary States of skin.

Skin changes: shape and configuration of the lesions.

Elementary lesions: macules, dyschromias, Erythema, erythematous, papules, tubers, nodules, tumors, vesicles, blisters, pustules, erosions, ulcerations, Keratosis and sclerosis, among other injuries.

Criteria for classification of alterations.

Structural and functional alterations: alterations of the keratinization, pigmentation, hairy, nails, vascular and microcirculation.

Alterations of the dermis and hypodermis.

Alterations of the sweat and sebaceous glands.

Nevi.

Irritative reactions and allergies.

Infections and infestations.

Abnormalities of hands and feet.

The aging. External signs. Phases. Anatomical and physiological changes skin and body. Factors that cause aging.

Solar radiation and skin.

The breasts. Anatomy and physiology of the mammary glands. Changes physiological. Aspects aesthetic of the breast. Care.

(d) application of the procedure of analysis aesthetic: concept of analysis aesthetic.

Phases of the analysis: interview.

Review visual by watching direct or indirect.

The exploration: methods of exploration. Scans complementary.

Relationship of the features skin with the alterations aesthetic.

Facial analysis protocols design.

Design of body analysis protocols. Study areas, measures and overall assessment.

Execution of the diagnosis: preparation of the area of work, media and product selection, interpretation and data, completion of documentation and assessment report.

(e) design of cosmetic procedures for face and body treatments: Bases for the design of aesthetic treatment protocols: elements: process, sequencing, timing, technical means, cosmetic and manuals.

Criteria of evaluation of results.

Phases of the treatment protocol: study of the area, selection and preparation of the technical means, skin preparation, core of treatment completion of treatment and professional advice.

Protocols of facial treatments: facial aesthetic treatment concept.

Fundamentals.

Phases of the facial treatment.

Criteria for classification of treatments.

Design of the different protocols of treatment facial.

Protocols of the treatments body: concept of the treatment aesthetic body.

Fundamentals.

Phases of treatment.

Criteria for classification of treatments.

Design of protocols of body treatments.

(f) determination of the aesthetic care anterior and posterior to the medicine and cosmetic surgery treatments: facial techniques medico-esteticas with or without surgical interventions: types. Chemical peeling. Dermabrasion. Botox. Techniques of filling. Others.

Description.

Substances, materials and equipment.

Relationship with aesthetic treatments: indications, contraindications and precautions.

Technical body medico-esteticas with or without surgical interventions: types. Liposculpture. Mesotherapy.

Description.

Substances, materials and equipment.

Relationship with those treatments aesthetic: indications, contraindications and precautions.

Design of procedures of work of care aesthetic previous and subsequent to the treatments of medicine and surgery aesthetic.

(g) design of treatments aesthetic innovative: analysis of the market. Means of information (journals, Internet). Use of the ICT and programs up-to-date.

Innovations technical, manual and cosmetic in the field of the aesthetic.

Analysis of materials, appliances and early active. Features innovative.

Advantages and disadvantages of the introduction of new treatments.

Design of novel treatments.

Assessment of viability in the field of aesthetics.

9. professional module: Cosmetics applied to beauty and well-being.

Code: 0752.

Contents: a) selection of the components of a cosmetic:


Concept of cosmetic.

Composition general: early active, excipients and additives.

Qualitative and quantitative composition.

Outside of the cosmetic. Elements: containers, outer packaging or packaging leaflet and sticker. Importance of design for sale. Labeling.

Substances frequently used in cosmetics: water, fats, surfactants and extracts vegetable, pH modifiers, humectants and modifying the viscosity, among others.

Performance of the cosmetics on the skin: penetrability.

(b) preparation of cosmetics: dispersed systems: homogeneous: dissolutions.

Heterogeneous: suspensions, colloidal suspensions, gels, emulsions, microemulsions, multiple emulsions, sprays and foams.

Cosmetic forms: types and features. Relation between the form of presentation container.

Cosmetic Lab: equipment and laboratory materials.

Techniques used in the preparation of cosmetics.

Cosmetic formula: ingredients and quantitative composition. (INCI code).

Examples of preparation of cosmetics: emulsions and gels, among others.

(c) identification of the cosmetic lines on the market: classification of cosmetics: classification criteria.

Hygiene cosmetics: concept of hygiene.

Cleaning agents: composition, mechanism of action and forms of presentation.

Classification: cosmetic cleansing, toning, Exfoliating and complementary.

Cosmetics of hydration, maintenance and protection of the skin. Concept of skin moisturising active principles: classification, composition, mechanism of action and forms of presentation. Solar cosmetics.

Aesthetic treatment cosmetics: composition, mechanism of action, criteria for classification and presentation forms: cosmetics for aging: Anticellulite, firming and regenerating.

Slimming topics.

Antiestrias, circulatory disorders and cosmetic whitening cosmetics.

Cosmetics for the removal and hair camouflage.

Cosmetics for make-up and exogenous bronzers.

Pigments and dyes for micropigmentation.

(d) special cosmetic and innovative components: Perfumes: conception, composition, essence used in perfumery and types. Storage and handling.

Cosmetic application in electrotherapy: composition, mechanism of action and forms of presentation. Classification: Cosmetics for techniques of mechanical effect: rotary brushes, pressotherapy, ultrasound and phototherapy, among others.

Cosmetics for application of electrical currents: galvanic current, current excitomotrices, high frequency Diathermy and electric depilation.

Cosmetics for techniques that use electromagnetic radiation.

Specific cosmetic for aesthetic medicine: materials of filler, botox, Mesotherapy.

Nutricosmetics: principal components, effects and indications, classification criteria and forms of presentation.

Special components and innovations in cosmetics. Active principles of new generation. Cosmetic vectors. Liposomes, nanosomes, cyclodextrins, microcapsules and sphères.

(e) Organization of them cosmetics in them establishments: those establishments of sale of cosmetics: types of retailers and features: trade traditional (salons of image personal, drugstores, perfumeries, distributors, herbal remedies, pharmacies and drugstores), trade of free service, trade mixed and retailers without shop.

Sale of cosmetics space: criteria of distribution, brackets and furniture. The disposal of the product on the shelves.

Trade policy: marketing mix.

The space of sale of cosmetics. Concept and elements of merchandising. Advertising.

Safety and hygiene of cosmetic products: the rotation of the product.

Conservation of cosmetic products: stability and alterations of the same.

Rules of storage and handling.

Regulation on storage and collection of cosmetic products contaminated and altered.

Provisioning.

Brands: Professional and non-professional. Cosmetics ranges.

Legislation on cosmetic products. The reglamentación of cosmetic products: parts, definitions, labelling, sanitary conditions, prohibitions, reporting requirements, actions of public authorities, publicity, confidentiality, manufacturing activities, offences and penalties.

(f) planning of the cosmetic advice: advice plan elements: development of standardized protocols: preliminary analysis of the area, detection of the needs and demands of the user.

Criteria of selection of cosmetics and its brands.

Professional and technical knowledge of the product.

Analysis of trends.

Techniques of assessment of cosmetic products: direct advice.

Advice through external and internal media.

Sale promotion: objectives and promotional campaigns.

Technical demonstrations of cosmetics and professional sample fairs.

Professional journals. Structure and development of professional articles.

Adviser of sale: phases and techniques of sale, resolution of complaints and claims.

Features of sale Advisor: types of vendors, image and professionalism.

10. professional module: Comprehensive beauty treatments.

Code: 0753.

Contents: a) implementation of guidelines to the customer: the customer service. The customer as the business centre. Protocol of care in different phases of the process.

Image and professionalism: the personal image of the professional as corporate image (hygiene, makeup, hairstyles, clothing and accessories, among others).

Integral treatments as cosmetic services. Characteristics of services. Types of services. Patterns of creation of new services.

Application of techniques of advertising and sales promotion.

Business strategies for the sale of integral treatments: phases. Application of techniques of sale.

(b) management of facilities, technical means and materials: the cabin aesthetics for integral aesthetics treatments: General features, design, materials, technical equipment, lighting, atmosphere and furnishings. Order and cleanliness.

The programming of activities. Calendar control.

Logistics and storage. Inventory control. Criteria for storing cosmetics, tools and materials. Location. Conditions of conservation. Purchases: supplier selection. Planning of purchases.

Management of the maintenance of technical equipment used in aesthetic treatments.

Criteria of selection and application of technical for the hygiene, disinfection and sterilization of equipment and useful used in the treatments of aesthetic integral. The area of disinfection.

(c) realization of the analysis aesthetic: documentation technical: completion of tab technical of the customer. Data. Confidentiality. Protection of data.

Interpretation of the documentation professional.

File or file of the documentation. Update of the information. Application of technologies of the information and communication.

Application of protocols of accommodation of the user: reception, care and farewell. Attitude professional.

Application of techniques of communication. The interview. Questionnaires oral and written. Collection of the information of the customer.

Application of protocols of techniques of analysis of alterations aesthetic: media technical of diagnosis.

Analysis aesthetic custom for treatments of aesthetic whole. Analysis of demands and expectations of the customer.

(d) design of personalised beauty treatments: classification of treatments: according to body area (facial, body and breasts, among others), alteration (dehydration, flaccidity, obesity, cellulite and acne, among others), type of skin (dry, oily,) among others, desired effect (firming, anti-stress and depigmentation, among others), physiological status (pregnancy, post-partum and aging, among others); used appliances, sex and marketing (lifting, satin effect), among others.

Selection criteria of appliances used in facial and body aesthetic treatments. Selection of accessories. Programming.

Criteria of selection of manual techniques in facial and body aesthetic treatments.

Criteria of selection of cosmetics suitable for integral treatments: guidelines for preparation and handling. Methods of application.

Criteria for the integration of the technical resources, manuals and cosmetic. Summative effects: synergy. Antagonistic effects: incompatibilities among them.

Custom protocols of integral aesthetics treatments: interpreting the data obtained from the aesthetic analysis and professional reports. Adapting the needs/demands and characteristics of the client. Elements of the custom protocol. Sequencing techniques, number of sessions, frequency and timing.

(e) implementation of integral beauty treatments: technical information to the customer about the process.

Previous techniques: preparation of the area.

Organization of the implementation of facial and body treatments. Peculiarities of the custom protocol: sequencing techniques, regulation of parameters, and timing.

Post-treatment counselling: guidelines for healthy living, possible side effects and precautions. Guidelines for the application of cosmetics for personal use. Recommendations.


(f) planning of the application of care aesthetic previous and subsequent to the treatments of surgery and medicine aesthetic: interpretation of reports and prescription medical.

Treatments and techniques specific in care aesthetic pre-medicine aesthetic. Types (exfoliation, moisturizing, regeneration, techniques to improve skin elasticity and techniques to improve vascularization, among others). Design of the custom protocol. Indications and contraindications.

Treatments and specific techniques in aesthetic care cosmetic postmedicina. Design of the Protocol custom. Indications and contraindications.

Processes of implementation of treatments and techniques specific in care aesthetic pre-medicine aesthetic. Combination of manual techniques, cosmetic and electroesteticas. Stages of the process. Precautions.

Implementation processes of treatments and specific techniques in aesthetic care postmedicina. Combination of manual techniques, cosmetic and electroesteticas. Stages of the process. Precautions.

Coordination with the professionals of the health sector.

(g) assess the quality of aesthetics and beauty services: leading causes of deficiencies in basic aesthetic services.

Techniques to detect the degree of customer satisfaction.

Techniques to correct deviations in different aesthetics and beauty services.

Techniques for solving complaints and claims.

11. professional module: Project of integral aesthetics and well-being.

Code: 0754.

Contents: a) identification of the needs of the productive sector and the Organization of the company: identification of job functions.

Structure and business organization of the sector.

Activity of the company and its location in the sector.

Organizational chart of the company. Functional relationship between departments.

Industry trends: productive, economic, organisational, employment and others.

Working in the field of company procedures. Systems and methods of work.

Determination of excluded labour relations and special labour relations.

Collective agreement applicable to the professional field.

The culture of the company: corporate image.

Systems of quality and security applicable in the sector.

(b) design of sector-related projects: analysis of the local situation, of the business sector in the area and offer the context in which will develop the professional training module in workplace.

Compilation of information.

General structure of a project.

Elaboration of a working script.

Planning of the implementation of the project: objectives, contents, resources, methodology, activities, timing and evaluation.

Feasibility and opportunity project.

Review of the applicable regulations.

(c) planning of the implementation of the project: sequencing of activities.

Elaboration of work instructions.

Development of a risk prevention plan.

Documentation for the planning of the implementation of the project.

Compliance with safety standards and environmental.

Indicators of the quality assurance of the project.

(d) a definition of procedures for monitoring and evaluation of the implementation of the project: proposal of solutions to the objectives of the project and justification of the selected.

Definition of the procedure of evaluation of the project.

Determination of the variables subject to evaluation.

Documentation required for the evaluation of the project.

Quality control of process and final product.

Registration of results.

12. professional module: Training and job counseling.

Code: 0755.

Contents: a) actively seeking employment: evaluation of the importance of lifelong learning for the labour and professional career of the technician in Integral aesthetics and well-being.

Analysis of interests, skills, and personal motivations for the career.

Identification of learning paths related to the technician in Integral aesthetics and well-being.

Responsibility for own learning. Knowledge of the requirements and the expected fruits.

Definition and analysis of the industry professional of the title of technical Superior in aesthetic Integral and welfare.

Planning of the own career: establishment of objectives labour, to medium and long term, compatible with needs and preferences.

Realistic and consistent with the current lineup and the projected targets.

The process of job search in small, medium and large companies in the sector.

Opportunities for learning and employment in Europe. Europass, Ploteus.

Job search tools and techniques.

Evaluation of the self-employment as an alternative for the professional insertion.

The process of decision-making.

Establishment of a list of personal consistency check between career, training plan and aspirations.

(b) management of the conflict and work teams: assessment of the advantages and disadvantages of teamwork for the effectiveness of the organization.

Kinds of equipment in the field of aesthetics and well-being according to the roles played.

Analysis of the formation of the work teams.

Characteristics of an effective team.

Participation in the task force. Analysis of the possible roles of its members.

Definition of conflict: characteristics, sources and stages of the conflict.

Methods for resolution or deletion of the conflict: mediation, conciliation and arbitration.

(c) employment contract: the right to work.

Intervention by the public authorities in labour relations.

Analysis of the individual employment relationship.

Determination of excluded labour relations and special labour relations.

Modalities of work and measures of promotion of the procurement contract.

Rights and duties arising from the employment relationship.

Working conditions. Wages, working time and working rest.

Modification, suspension and termination of the employment contract.

Representation of workers.

Collective bargaining as a means for the reconciliation of the interests of workers and employers.

Analysis of a collective agreement applicable to the professional field of the technician in Integral aesthetics and well-being.

Collective labour disputes.

New organization of work environments: outsourcing and teleworking, among others.

Benefits for workers in the new organizations: flexibility and social benefits, among others.

(d) Social Security, employment and unemployment: the system of Social security as a basic principle of social solidarity.

Structure of the Social security system.

Determination of the main obligations of employers and employees in matters of Social Security: affiliation, high, low, and quote.

The protective action of Social Security.

Classes, requirements and amount of benefits.

Concept and yielded situations by unemployment.

Systems consulting of workers regarding their rights and duties.

(e) evaluation of occupational hazards: importance of the culture of prevention at all stages of the professional activity.

Assessment of the relationship between work and health.

Analysis and determination of working conditions.

The concept of professional risk. Analysis of risk factors.

The evaluation of risks in the enterprise as the basic element of the preventive activity.

Analysis of risks linked to security conditions.

Analysis of risks linked to environmental conditions.

Analysis of risks linked to psychosocial and ergonomic conditions.

Specific risks in the field of aesthetics and well-being.

Determination of possible damage to the health of the worker which can arise from the detected risk situations.

(f) planning of prevention of risks in the enterprise: rights and duties in the area of occupational risk prevention.

Responsibilities in the area of occupational risk prevention.

Prevention in the company management.

Representation of workers in prevention.

Public organisations related to the prevention of occupational risks.

Planning of prevention in the company.

Emergency and evacuation in environments of work plans.

Development of an emergency plan in a small or medium company in the sector.

(g) implementation of measures of prevention and protection in the enterprise: determination of individual and collective protection and prevention measures.

Protocol of action in a situation of emergency.

First aid. Medical emergency. Basic concepts.

Application of first aid techniques.

Training to workers in the field of emergency plans.

Surveillance of the health of workers.

13. professional module: Enterprise and entrepreneurship.

Code: 0756.

Contents: a) entrepreneurship: innovation and economic development. Main features of the innovation activity of aesthetics and well-being (materials, technology and organization of production, among others).

The culture enterprising as need social.

The character entrepreneur.

Factors key of the entrepreneurs: initiative, creativity and education.

The collaboration between entrepreneurs.

The performance of them entrepreneurs as employees of a company associated with the aesthetic and the welfare.

The performance of the entrepreneurs as entrepreneurs in the sector of the aesthetic and the well-being.

The risk in the activity entrepreneur.

Concept of entrepreneur. Requirements for the exercise of the activity business.


Personal goals versus business objectives.

Business plan: business idea in the field of aesthetics and well-being.

Good practices of entrepreneurial culture in the activity of aesthetics and well-being, at the local level.

(b) the company and its environment: basic functions of the company.

The company as a system.

The general environment of the company.

Analysis of the environment general of a company associated with the aesthetic and the well-being.

The specific environment of the company.

Analysis of the environment specific of a company associated with the aesthetic and the well-being.

An aesthetics and wellness company relations with their environment.

An aesthetics and wellness company relations with the whole of society.

The culture of the company: corporate image.

The responsibility social.

The balance social.

Business ethics.

Social responsibility and ethics of the companies in the sector of aesthetics and well-being.

(c) creation and implementation of a company: company concept.

Types of company.

The responsibility of the owners of the company.

Taxation in enterprises.

Choice of the legal form. Dimension and number of partners.

Administrative procedures for the formation of a company.

Economic feasibility and financial viability of a company related to the aesthetics and well-being.

Analysis of the sources of financing and preparation of the budget of a company related with the aesthetic and the welfare.

Aid, grants and incentives tax for the SMEs related with the aesthetic and the welfare.

Business plan: choice of the legal form, study of economic and financial viability, administrative procedures and management of grants and subsidies.

(d) administrative function: concept of accounting and basics.

Accounting operations: registration of the economic information of a company.

Accounting as a true picture of the economic situation.

Analysis of the information accounting.

Tax obligations of the companies.

Requirements and deadlines for the submission of official documents.

Administrative management of a company related to the aesthetics and well-being.

14. module Professional: training in centers of work.

Code: 0757.

Contents: a) identification of the structure and business organization: structure and enterprise organization in the sector of personal image.

Activity of the company and its location in the sector of personal image.

Organizational chart of the company. Functional relationship between departments logistical organization of the company. Suppliers, customers and marketing channels.

Working in the field of company procedures. Systems and methods of work.

Resources human in the company: requirements of training and of skills professional, personal and social associated to the different positions of work.

Quality system established in the work center.

Security system established in the work center.

(b) application of ethical and work habits: personal attitudes: empathy, punctuality.

Attitudes professional: order, cleaning, responsibility and security.

Attitudes to the prevention of risks labor and environmental.

Hierarchy in the company. Communication with the team's work.

Documentation of the activities Professional: methods of classification, coding, renewal and deletion.

Recognition and application of the standards internal of the company, instructions of work, procedures standard of work and others.

(c) Organization of the activities related with them services aesthetic: interpretation of the procedures and instructions of the company.

The image staff as image of company.

Management of information and documentation used and generated in the process trade.

Logistics and procurement of products and materials.

Management of files of customers, products and suppliers.

Interpretation of the protocols of communication in all the phases of the process.

The customer service organization.

Interpretation and design of protocols analysis and treatment of the company.

Management of the maintenance of facilities and equipment used in the establishment.

Teamwork in the company's plans.

(d) implementation of protocols of facial and body treatments: preparation of the facilities, equipment and material: the requirements of safety and hygiene.

The accommodation of customer.

Establishment of personalized treatment. Aesthetic analysis.

Selection of media and techniques according to the treatment protocol. Previous operations.

Realization of facial or body treatments.

Application of manual techniques of massage or lymphatic drainage.

Applying decorative treatments: corrective techniques.

Interpretation of aesthetic procedures before and after surgery and aesthetic medicine treatments.

Completion of the technical documentation.

(e) application of mechanical and advanced waxing techniques: hygiene and organization of the workplace before, during and after waxing service.

Recognition of the hairy features and skin.

Identification of the technique of hair removal.

Selection of the equipment, means and cosmetics.

Adoption of measures to protect the professional and the customer.

Calculation and adjustment of parameters in electric epilation and photoepilation.

Application of operations of packaging and of procedures of waxing mechanical and of hair removal advanced according to instructions received.

Guidelines of advice in the process of hair removal mechanical and/or advanced.

Adoption of the measures of hygiene, safety, prevention of risks labor and of protection environmental.

(f) development and implementation of processes of aesthetic hydrothermal and of cosmetics thermal: identification of the contraindications to them processes hydrothermal. Procedure of collection of data. Analysis before. Interpretation of reports of other professionals.

Recognition of the process and of the sequence of actions.

Preparation and conditioning of the facilities. Selection of thermal cosmetics, parameters, techniques and media. Information to the client.

Technical hidroesteticas and cosmetics thermal.

Control of the processes of aesthetic hydrothermal. Parameters of quality.

Plans of hygiene and cleaning of the area, equipment and lingerie. Regulatory hygienic-sanitary and of protection environmental applicable.

(g) advice and sale of products and services cosmetic: the products and services of the company.

Identification of the characteristics of the client of the company.

He behavior professional: features of an adviser of sale in a company of service aesthetic.

Application of the techniques of sale.

Identification of the techniques of merchandising used in the local.

The counseling professional.

Resolution of claims and complaints according to the Protocol of the company.

ANNEX II sequencing and distribution time weekly of those modules professional cycle training of grade upper: aesthetic Integral and wellness module professional duration (hours) first course (h / week) second course 2 quarters (h / week) 1 quarter (hours) 0744. Appliances aesthetic 125 4 0747. Masaje estético





185





6





 





 






0749. Micropigmentación





105





3





 





 






0750. Processes physiological and of hygiene in image personal (1) (2) 105 3 0751. Dermoestetica.





105





3





 





 






0752. Cosmetics applied to aesthetics and well-being 155 5 0755. Training and labour orientation 90 3 hours reserved for the module given in English 90 3 0745. Aesthetic hydrothermal 125 6 0746. Depilación avanzada





125





 





6





 






0748. Esthetic drainage and 115 6 0753 pressure techniques. 135 7 0756 integral beauty treatments. Enterprise and initiative entrepreneur 60 3 hours reserved for the module given in 40 2 0754 English. Project of integral aesthetics and well-being 40 40 0757. Training in workplace 400 400 Total in the training cycle






2,000 30 30 400 (1) professional modules support.

(2) transverse professional modules to other titles of vocational training.

ANNEX III susceptible modules to be taught in English language.

0745. aesthetic hydrothermal.

0746. hair removal advanced.

0747 aesthetic massage.

0748 aesthetic drainage and pressure techniques.

0752 cosmetics applied to beauty and well-being.

0753 integral aesthetic treatments.

ANNEX IV spaces and equipment minimum spaces: space training surface m² 30 students 20 students 60 multipurpose classroom 40 workshop (s) of aesthetic 120 90 90 60 classroom perfumery and Cosmetology Laboratory workshop of aesthetic hydrothermal 120 90 minimum equipment: space training equipment multi-purpose classroom.





Teams audiovisual.

Canon of projection.

PCs installed in network, with printer and scanner.

Internet.

Equipment room.






Workshop (s) of aesthetics.





Auxiliary services of water and electricity.

Floors, walls, ceilings, protection of windows and drains according to the normative technical force.

Table and ergonomic chair for the teacher.

Slate.

Vanities with shelves and mirrors with light around.

Armchairs specific makeup can be modified in height and headrest.

Massage tables adjustable in height.

Chairs.

Stools with backrest of height can be modified.

Auxiliary trolley with wheels.

Auxiliary trays.

Footrest.

Paraban separator of spaces.

Skin analysis equipment: magnifying glasses, wood light, hydration, sebometro, micro meter and others.

Equipment electric and beauty treatment equipment: devices of steam ozone, spray and suction cups; rotary brushes; paraffin heater; continuous and variable currents equipment, ultrasonic peeling; equipment of ultrasonic, vacuum therapy and preassure therapy; thermotherapy devices; infrared radiation device.

Equipment specific to the hair removal: teams of depilation definitive (electric, radio and others); protective glasses; Electric depilation needles; hot and warm wax melters.

Equipment specific to micropigmentation and Tan: machines of micropigmentar and replacement of all the parts; needles of micropigmentation; containers for pigments; airbrush with different nozzles and deposits; camera and video camera.

Specific equipment for massage: complementary accessories (pindas, stones and others); burners and diffusers of essences; specific equipment for chromatherapy; teams of hearing of music.

Specific equipment for aesthetic drainage: futon/tatami.

Equipment for cleaning and disinfection of tools, materials and equipment: sterilizer by dry heat and autoclave UVC radiations.

Showcases and cabinets for equipment and materials.

Containers for recyclable and polluting material.

First aid kit.

Warehouse.

Changing rooms.

Sanitary.






Laboratory of Cosmetology and Perfumery.





Auxiliary services of water and electricity.

Table and ergonomic chair for the teacher.

Slate.

Individual positions with current and laboratory furniture.

Laboratory equipment: bathroom Maria, balance, pH meter, magnetic stirrer, and others.

Laboratory: beakers, pipettes, spatulas, glass rods and others.

Microscopes and their auxiliary material.

Showcases and cabinets for material and equipment.

Clastico man and models anatomical.






Classroom workshop of hydro-thermal aesthetics.





Auxiliary services of water and electricity.

Floors, walls, ceilings, protection of windows and drains according to the normative technical force.

Table and Chair ergonomic for the teacher.

Slate.

Stretchers of massage adjustable in height.

Chairs.

Stools with backrest of height can be modified.

Trolleys auxiliary with wheels.

Trays auxiliary.

Equipment for the analysis cutaneous: magnifying glasses, light of wood, meter of hydration, sebometro, micro and others.

Gallery of jets to pressure.

Sauna/steam bath.

Shower massage.

Hot tub and underwater massage.

Founder of muds.

Water heater.

Equipment for cleaning and disinfection of tools, materials and equipment: sterilizer by dry heat and autoclave UVC radiations.

Showcases and cabinets for equipment and materials.

Containers for recyclable and polluting material.

First aid kit.

Warehouse.

Changing rooms.

Sanitary.

Related Laws