Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("BOE" of 6 February 1996), and having regard to the standards developed by the European Standards for Standardisation CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy, of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognised for this purpose by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
Having regard to the procedure for the elaboration of European standards, in accordance with paragraph 11.2.6.4 of the common rules of CEN/CENELEC and 13.7 of the rules of procedure of ETSI for the standardisation work of those mentioned European bodies.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards to which the Spanish standard range has been granted during the month of December 2011 identified by its title and code numerical, indicating their date of availability, as set out in the Annex to this Resolution.
Madrid, January 23, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Ratification of European Standards. December 2011
Title | F. Availb. | Anula | |
---|---|---|---|
15969-1:2011 | Cisternas for the transport of dangerous goods. Digital interface for the transfer of data between the tanker and the fixed installations. Part 1: Specifying the protocol. Control, measurement, and event data. | 2011-09-07 |
|
15969-2:2011 |
Cisternas for the transport of dangerous goods. Digital interface for the transfer of data between the tanker and the fixed installations. Part 2: Commercial and logistical data. | 2011-09-28 |
|
45510-2-9:2008 |
Guide to purchasing equipment for power stations. Electrical equipment. Cabling systems. | 2008-06-27 |
|
60204-33:2011 | Machine Security. Electrical equipment of the machines. Part 33: Requirements for semiconductor manufacturing equipment. | 2011-03-04 |
|
60684-2:2011 | Flexible insulating tubes. Part 2: Test methods. | 2011-09-16 |
|
60749-7:2011 | Semiconductors Devices. Mechanical and climatic testing methods. Part 7: Measurement of internal moisture content and analysis of other waste gases. | 2011-09-09 |
|
EN 61169-35:2011 | Radio Frequency Connectors. Part 35: Intermediate specification for 2.92 series R.F. coaxial connectors | 2011-09-02 |
|
EN 61747-6-3:2011 | Liquid Crystal Display Devices. Part 6-3: Measure of the artifact movement of the liquid crystal display modules with active array. | 2011-09-02 |
|
61850-8-1:2011 | Systems and communication networks for automation of generation facilities. Part 8-1: Communications-specific mapping services (SCSM). MMS mapped (ISO/CEI 9506 Part 1 and Part 2) and ISO/CEI 8802-3. | 2011-09-02 |
|
62047-10:2011 | Semiconductor devices. Micro-electromechanical devices. Part 10: Compression test of micropillars in MEMS materials. | 2011-09-09 |
|
EN 62634:2011 | Data Broadcast System (RDS). Receivers and their characteristics. Measurement methods. | 2011-08-26 |
|
ISO 13503-1:2011 | Oil and Natural Gas Industries. Termination fluids and materials. Part 1: Measurement of the viscous properties of completion fluids (ISO 13503-1:2011). | 2011-11-01 | EN ISO 13503-1:2005
|
EN ISO 14906:2011 | Telematics for traffic and road transport. Electronic toll. Definition of the application layer interface for short-range, dedicated communications. (ISO 14906:2011). | 2011-10-15 | UNE-EN ISO 14906:2007 |
ISO 15006:2011 |
Road vehicles. Ergonomie aspects of the control and information systems in transport. Specifications relating to the presentation of hearing information on board the vehicle. (ISO 15006:2011). | 2011-10-01 | UNE-EN ISO 15006:2005 |
ISO 21254-1:2011 |
lasers and equipment associated with lasers. Test methods of the damage threshold produced by laser radiation. Part 1: General definitions and principles (ISO 21254-1:2011). | 2011-07-15 | UNE-EN ISO 11254-1:2001 UNE-EN ISO 11254-2:2003 |
ISO 21254-2:2011 | lasers and equipment associated with lasers. Test methods of the damage threshold produced by laser radiation. Part 2: Determining the threshold (ISO 21254-2:2011). | 2011-07-15 | UNE-EN ISO 11254-1:2001 UNE-EN ISO 11254-2:2003 |
ISO 21254-3:2011 | lasers and equipment associated with lasers. Test methods of the damage threshold produced by laser radiation. Part 3: Evaluation of the ability to handle laser power (energy) (ISO 21254-3:2011). | 2011-07-15 | UNE-EN ISO 11254-3:2007 |