Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1996 (BOE of 6 February 1996), and having regard to the file of the rules adopted by the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 January 1986, August, and recognized by the additional provision of the said Royal Decree 2200/1995, of 28 of December.
This Directorate-General has decided to publish in the Official Gazette the list of Spanish standards UNE approved by AENOR, corresponding to the month of April 2012, identified by its title and numerical code, which appears as an annex to this Resolution.
This Resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, May 9, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Rules edited in the month of April 2012
| Title | |||
|---|---|---|---|
| UNE 60402-1:2008/1M: 2012. | gaseous fuels. Pressure regulators with maximum operating pressure (MOP) of less than or equal to 0,4 bar and MOP of output less than or equal to 0,05 bar. Part 1: Regulators with built-in safety valve for minimum pressure with equivalent flow of less than or equal to 4.8 m3 (n) /h of air. |
| |
| UNE 60402-2:2008/1M: 2012. | gaseous fuels. Pressure regulators with maximum operating pressure (MOP) of less than or equal to 0,4 bar and MOP of output less than or equal to 0,05 bar. Part 2: Regulators with an input MOP of more than 150 mbar, with built-in safety valve for minimum pressure, with built-in safety valve for maximum pressure and with an equivalent flow of less than or equal to 4,8 m3 (n) /h air. |
| |
|
84655:2012. | Cosmetic raw materials. Plant extracts. Ivy hydroglycolic extract (Hedera helix L.). | UNE 84655:2006. | |
|
84656:2012. | Cosmetic Raw Materials. Plant extracts. Green tea hydroglycolic extract (Camellia sinensis L.). | UNE 84656:2006. | |
|
84657:2012. | Cosmetic Raw Materials. Plant extracts. Hydroglycolic extract of ginkgo biloba (Ginkgo biloba L.). | UNE 84657:2006. | |
|
84658:2012. | Cosmetic Raw Materials. Plant extracts. Hydroglycolic extract of fucus (Fucus vesiculosus L.). | UNE 84658:2006. | |
|
84659:2012. | Cosmetic Raw Materials. Plant extracts. Rusco hydroglycolic extract (Ruscus aculeatus L.). | UNE 84659:2006. | |
|
84660:2012. | Cosmetic Raw Materials. Plant extracts. Oatmeal hydroglycolic extract (Avena sativa L.). | UNE 84660:2006. | |
|
116005:2012. | Manufacture by adding layers to plastic materials. Additive manufacturing. Preparing test pieces. |
| |
|
une 135340:2010/1m: 2012. | Vertical Senalization: Laminas Polymeric microprismatic retroreflectants. Test features and methods. |
| |
|
UNE-CEN ISO/TS 27469:2012 EX. | Industries of the oil, petrochemicals and natural gas. Test method for fire gates. (ISO/TS 27469:2010). |
| |
|
UNE-CEN/TS 16233-1:2012 EX. | Foodstuffs. Method by HPLC for the determination of xanthophilus in fish muscle. Part 1: Determination of astaxanthin and canthaxanthin. |
| |
|
UNE-CEN/TS 16233-2:2012 EX. | Foodstuffs. Method by HPLC for the determination of xanthophilus in fish muscle. Part 2: Identification of the enantiomeric distribution of astaxanthin. |
| |
|
UNE-EN 71-1:2012. | Toy Security. Part 1: Mechanical and physical properties. | UNE-EN 71-1:2006 + A9:2010. | |
|
UNE-EN 474-4:2008 + A2:2012. | Machinery for Land Movement. Security. Part 4: Requirements for rollbacks. | UNE-EN 474-4:2008 + A1:2009. | |
|
UNE-EN 474-5:2007 + A2:2012. | Machinery for Land Movement. Security. Part 5: Requirements for hydraulic excavators. | UNE-EN 474-5:2007 + A1:2009. | |
|
UNE-EN 558:2008 + A1:2012. |
| UNE-EN 558:2008. UNE-EN 558 :2008/AC: 2010. | |
|
UNE-EN 764-2:2012. | Pressure equipment. Part 2: Measures, symbols, and units. | UNE-EN 764-2:2003. | |
| Glass for the building. Layer glass. Part 2: Requirements and test methods for classes A, B, and S. | UNE-EN 1096-2:2001. | ||
| UNE-EN 1096-3:2012. |
Glass for building. Layer glass. Part 3: Requirements and test methods for the layers of classes C and D. | UNE-EN 1096-3:2001. | |
| UNE-EN 1459:2000 + A3:2012. |
Safety of the maintenance trucks. Self-propelled wheelbarrows. |
| |
|
UNE-EN 1854:2010 ERRATUM: 2012. | Pressure control devices for gas burners and gas appliances. |
| |
|
UNE-EN 1863-1:2012. |
Glass for building. Thermoset sodocalcium silicate glass. Part 1: Definition and description. | UNE-EN 1863-1:2000. | |
|
UNE-EN 10025-2:2006 ERRATUM: 2012. | Hot-rolled products of steels for structures. Part 2: Technical conditions for the supply of unalloyed structural steels. |
| |
|
UNE-EN 10218-1:2012. | Alambres and steel-threaded products. Generalities. Part 1: Test methods. | UNE-EN 10218-1:1995. | |
|
UNE-EN 10218-2:2012. | Of steel. Generalities. Part 2: Wire measures and tolerances. | UNE-EN 10218-2:1996. | |
|
UNE-EN 10264-1:2012. | Steel and wire products. Wire steel wires. Part 1: General requirements. | UNE-EN 10264-1:2002. | |
|
UNE-EN 10264-2:2012. | Steel and wire products. Wire steel wires. Part 2: Cold-drawn non-alloy steel wire for general use cables. | UNE-EN 10264-2:2002. | |
| UNE-EN 10264-3:2012. |
Steel and wire products. Wire steel wires. Part 3: Round and profiled alambres, of non-alloy steel, for strong solicitations. | UNE-EN 10264-3:2004. | |
| UNE-EN 10264-4:2012. | Steel and wire products. Wire steel wires. Part 4: Stainless steel wire. | UNE-EN 10264-4:2003. | |
| UNE-EN 12226:2012. | Geosynthetics. General trials for evaluation after durability test. | UNE-EN 12226:2001. | |
|
UNE-EN 12839:2012. | Concrete precast elements. Items for fencing. |
| |
|
UNE-EN 12859:2012. | gypsum panels. Definitions, specifications, and test methods. | UNE-EN 12859:2009. | |
| UNE-EN 13037:2012. | Soil improvers and culture substrates. Determining the pH. | UNE-EN 13037:2001. | |
|
UNE-EN 13145:2001 + A1:2012. | Applications railway. Pathways. Naughty and wooden supports. | UNE-EN 13145:2001. | |
| UNE-EN 13146-9:2011 + A1:2012. | Railway Applications. Via. Test methods of the fixing systems. Part 9: Determination of stiffness. | UNE-EN 13146-9:2011. | |
|
UNE-EN 13232-2:2005 + A1:2012. | Railway Applications. Via. Track appliances. Part 2: Requirements for geometric design. | UNE-EN 13232-2:2005. | |
|
UNE-EN 13232-3:2006 + A1:2012. | Railway Applications. Via. Track appliances. Part 3: Requirements for the wheel/rail interaction. | UNE-EN 13232-3:2006. | |
|
UNE-EN 13232-4:2007 + A1:2012. | Railway Applications. Via. Track appliances. Part 4: Maniplay, Lock and Control. | UNE-EN 13232-4:2007. | |
|
UNE-EN 13232-5:2007 + A1:2012. | Railway Applications. Via. Track appliances. Part 5: Needles. | UNE-EN 13232-5:2007. | |
|
UNE-EN 13232-6:2007 + A1:2012. | Applications railway. Via. Track appliances. Part 6: Cross-crossing and fixed-crossing hearts. | UNE-EN 13232-6:2007. | |
|
UNE-EN 13232-7:2007 + A1:2012. | Railway Applications. Via. Track appliances. Part 7: Hearts with moving parts. | UNE-EN 13232-7:2007. | |
| UNE-EN 13232-8:2008 + A1:2012. | Railway Applications. Via. Track appliances. Part 8: Dilation appliances. | UNE-EN 13232-8:2008. | |
|
UNE-EN 13232-9:2007 + A1:2012. | Railway Applications. Via. Track appliances. Part 9: Configuration. | UNE-EN 13232-9:2007. | |
| UNE-EN 13618:2012. | Flexible connections for drinking water facilities. Functional requirements and test methods. | UNE 53626-1:1989. UNE 53626-1:1996 ERRATUM. UNE 53626-1/1M: 1992. UNE 53626-2:1989. UNE 53626-2/1M: 1992. | |
|
UNE-EN 14081-3:2012. | Wood Structures. Structural wood with rectangular cross-section classified by its resistance. Part 3: Mechanical classification. Complementary requirements for factory production control. | EN 14081-3:2005. | |
|
UNE-EN 14154-1:2005 + A2:2012. | Water counters. Part 1: General requirements. | UNE-EN 14154-1:2005 + A1:2008. | |
|
UNE-EN 14272:2012. | Tableros Plywood. Calculation method for some mechanical properties. | UNE-ENV 14272:2003. | |
| Solid Biofuels. Fuel specifications and classes. Part 2: Wood pellets for non-industrial use. |
| ||
|
UNE-EN 14961-3:2012. | Solid Biofuels. Fuel specifications and classes. Part 3: Wood briquettes for non-industrial use. |
| |
|
UNE-EN 14961-4:2012. | Solid Biofuels. Fuel specifications and classes. Part 4: Wood chips for non-industrial use. |
| |
|
UNE-EN 15194:2009 + A1:2012. | Cycles. Cycles with electrical assistance. EPAC bikes. | UNE-EN 15194:2009. | |
| UNE-EN 15492:2012. | Ethanol as a component in the formulation of gasolines. Determination of the content of inorganic chloride and sulphates. Ion chromatography method. | UNE-EN 15492:2009. | |
| UNE-EN 15943:2012. | Format exchange of curriculum vitae. Data model. |
| |
|
UNE-EN 15946:2012. | Conservation of cultural heritage. Packaging principles for transport. |
| |
|
UNE-EN 15972:2012. | Water quality. Guidelines for the quantitative and qualitative study of marine phytoplankton. |
| |
|
UNE-EN 15997:2012. | All-terrain Vehicles (ATVs-Quads). Security requirements and test methods. |
| |
|
UNE-EN 16016-3:2012. | Tests Not destructive. Method of radiation. Digital tomography. Part 3: Operation and interpretation. |
| |
|
UNE-EN 16039:2012. | Water quality. Guidelines for the assessment of the hydromorphological characteristics of the lakes. |
| |
|
UNE-EN 16055:2012. | Cuero. Raw bovine skins. Description, presentation and conservation. | UNE 59100:1983. UNE 59101:1983. | |
|
UNE-EN 16105:2012. | Paintings and varnishes. Laboratory method for the determination of the leaching of substances from coatings in intermittent contact with water. |
| |
| UNE-EN 50527-2-1:2012. | Procedure for evaluating human exposure to electromagnetic fields in workers with active implantable medical devices. Part 2-1: Specific assessment for workers with cardiac pacemakers. |
| |
|
UNE-EN 50564:2012. | Electrical and electronic appliances and office electronics. Measuring low power consumption. |
| |
|
UNE-EN 55016-2-1:2009/A1:2012. | Specification for the methods and apparatus of measurement of radio disturbance and of immunity to radio disturbance. Part 2-1: Methods of measurement of radio disturbance and immunity to radio disturbances. Measures of the disturbances conducted. |
| |
|
UNE-EN 60038:2012. | Normalized Tensions from CENELEC. |
| |
|
UNE-EN 60704-2-10:2012. | Appliances and analogues. Test code for the determination of airborne noise noise. Part 2-10: Particular requirements for kitchens, ovens and electric grills, microwave ovens and any combination thereof. |
| |
| UNE-EN 61029-2-5:2012. | Security of the semi-fixed power tools. Part 2-5: Particular requirements for tape saws. |
| |
|
UNE-EN 62509:2012. | Battery Load Controllers for PV installations. Behavior and performance. |
| |
|
UNE-EN 62520:2012. | Railway applications. Electric traction. Short primary winding type asynchronous linear engines, powered by converters. |
| |
|
UNE-EN ISO 105-B10:2012. |
Textiles. Colour strength tests. Part B10: Exposure to artificial weathering. Exposure to the filtered radiation of a xenon arc lamp. (ISO 105-B10:2011). |
| |
|
UNE-EN ISO 2419:2012. | Leather. Physical and mechanical tests. Preparation and conditioning of samples. (ISO 2419:2012). | UNE-EN ISO 2419:2006. | |
|
UNE-EN ISO 3035:2012. | Carton undulating. Determination of the crush resistance in plane. (ISO 3035:2011). | UNE-EN 23035:1996. | |
|
UNE-EN ISO 3175-3:2004/AC: 2012. | Textiles. Professional maintenance, dry cleaning and wet cleaning of fabrics and garments. Part 3: Procedure for the performance test when cleaning and finishing are carried out with hydrocarbon solvents. (ISO 3175-3:2003/Cor 1:2009). |
| |
|
UNE-EN ISO 3175-4:2004/AC: 2012. | Textiles. Professional maintenance, dry cleaning and wet cleaning of fabrics and garments. Part 4: Procedure for the performance test when cleaning and finishing use simulated wet cleaning. (ISO 3175-4:2003/Cor 1:2009). |
| |
|
UNE-EN ISO 6946:2012. | Components and elements for the building. Thermal resistance and thermal transmittance. Method of calculation. (ISO 6946:2007). | UNE-EN ISO 6946:1997 UNE-EN ISO 6946:1997/A1:2005. | |
|
UNE-EN ISO 10211:2012. |
Thermal Bridges in Building. Heat flows and surface temperatures. Detailed calculations. (ISO 10211:2007). | UNE-EN ISO 10211-1:1995 UNE-EN ISO 10211-2:2002 UNE-EN ISO 10211-1/AC: 2002. | |
| UNE-EN ISO 10545-16:2012. | Ceramic Tiles. Part 16: Determination of small color differences. (ISO 10545-16:2010). | UNE-EN ISO 10545-16:2001. | |
|
UNE-EN ISO 11850:2012 ERRATUM: 2012. | Forestry Machinery. Security requirements. (ISO 11850:2011). | UNE-EN 14861:2005 + A1:2010. | |
|
UNE-EN ISO 11979-7:2007/A1:2012. | Implants Ophthalmic. Intraocular lenses. Part 7: Clinical research. Amendment 1. (ISO 11979-7:2006/Amd 1:2012). |
| |
|
UNE-EN ISO 12137:2012. | Paintings and varnishes. Determination of wear resistance. (ISO 12137:2011). | UNE-EN ISO 12137-1:2007. | |
|
UNE-EN ISO 14064-1:2012. | Effect Gases greenhouse. Part 1: Specifications and guidelines, at the level of the organisation, for the quantification and declaration of greenhouse gas emissions and reductions. (ISO 14064-1:2006). | UNE-ISO 14064-1:2006. | |
|
UNE-EN ISO 14064-2:2012. | Effect Gases greenhouse. Part 2: Specifications and guidelines, at the project level, for the quantification, monitoring and declaration of reductions and improvements in the elimination of greenhouse gases. (ISO 14064-2:2006). | UNE-ISO 14064-2:2006. | |
|
UNE-EN ISO 14064-3:2012. | Effect Gases greenhouse. Part 3: Specifications and guidelines for the validation and verification of greenhouse gas declarations. (ISO 14064-3:2006). | UNE-ISO 14064-3:2006. | |
|
UNE-EN ISO 14065:2012. | Effect Gases greenhouse. Requirements for organisms that perform the validation and verification of greenhouse gases, for use in accreditation or other forms of recognition. (ISO 14065:2007). | UNE-ISO 14065:2007. | |
|
UNE-EN ISO 16120-1:2012. | Alambron of non-alloy steel for the manufacture of wire. Part 1: General requirements. (ISO 16120-1:2011). | UNE-EN 10016-1:1995. | |
|
UNE-EN ISO 16120-2:2012. | No steel wire Alloy steel for the manufacture of wire. Part 2: Specific requirements of the general use wire rod. (ISO 16120-2:2011). | UNE-EN 10016-2:1995. | |
|
UNE-EN ISO 16120-3:2012. | No steel wire Alloy steel for the manufacture of wire. Part 3: Specific requirements of the wire rod of effervescent steel and low-carbon pseudoeffervescent. (ISO 16120-3:2011). | UNE-EN 10016-3:1995. | |
| No steel wire Alloy steel for the manufacture of wire. Part 4: Specific wiring requirements for special applications. (ISO 16120-4:2011). | UNE-EN 10016-4:1995. | ||
| UNE-EN ISO 19118:2012. | Geographic information. Coding. (ISO 19118:2011). | UNE-EN ISO 19118:2009. | |
|
UNE-EN ISO 23640:2012. | Healthcare products for in vitro diagnosis. Assessment of the stability of in vitro diagnostic reagents. (ISO 23640:2011). | UNE-EN 13640:2002. | |
|
UNE-EN ISO 26985:2012. | Floor Coatings Resilient. Identification of linoleum and determination of cement content and ash rate. (ISO 26985:2008). | UNE-EN 670:1997. | |
|
UNE-HD 60364-7-701:2009/A11:2012. | Installations power in low voltage. Part 7-701: Requirements for special installations and sites. Sites containing a bathtub or shower. |
| |
|
-ISO 2859-2:2012. | Sampling procedures for inspection by attributes. Part 2: Sampling plans for independent batch inspections, tabulated according to limit quality (CL). | UNE 66020-2:2001. | |
|
-ISO 22197-1:2012. | Technical ceramics (advanced ceramics, advanced technical ceramics). Test methods relating to the operation of semiconductor photocatalytic materials for air purification. Part 1: Removing nitric oxide. |
| |
|
UNE-ISO/TR 230-8:2012. | Tools-tools. Verification code for machine tools. Part 8: Vibrations. |
|
