Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1996 (BOE of 6 February 1996), and having regard to the standards developed by the European Standards for Standardisation CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy, of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognised for this purpose by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
Having regard to the procedure for the elaboration of European standards, in accordance with paragraph 11.2.6.4 of the common rules of CEN/CENELEC and 13.7 of the rules of procedure of ETSI for the standardisation work of those mentioned European bodies.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards to which the Spanish standard range has been granted during the month of April 2012, identified by its title and code numerical, indicating their date of availability, as set out in the Annex to this Resolution.
Madrid, May 9, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Ratification of European rules. April 2012
Title | F. Availb. | Anula | |
---|---|---|---|
1034-8:2012 | Machine Security. Safety requirements for the design and construction of paper manufacturing and finishing machines. Part 8: Refining plants. | 2012-03-07 |
|
1034-16:2012 |
Machine security. Safety requirements for the design and construction of paper manufacturing and finishing machines. Part 16: Paper and cardboard manufacturing machines. | 2012-03-14 |
|
2213:2012 | Aerospace. Steel FE-PL1505 (15CrMoV6). Cast into the air. Tempered and revisited. Bars-Of ≤ 16 mm-980 MPa≤Rm≤ 1 180 MPa. | 2012-03-14 |
|
2234:2012 |
Aerospace. Fire-resistant electrical cables. Technical specification. | 2012-03-14 |
|
2245:2012 | Aerospace Material. Pipes for liquids and gases. Definitions. | 2012-03-07 |
|
2311:2012 | Aerospace. Bearings with self-lubricating jacket. Technical specification. | 2012-03-14 |
|
2997-002:2012 | Aerospace Material. Circular electrical connectors of a threaded ring, resistant or not to fire, temperatures of -65 ° C to 175 ° C continuous, 200 ° C continuous, 260 ° C of peak. Part 002: Specifying the operating characteristics and dispositions of the contacts. | 2012-03-07 | EN 2997-002:2006 |
3155-035:2012 | Aerospace. Electrical contacts used in connection elements. Part 035: Electrical contacts, triaxial, size 08, female, type D, crimped, class R. Product rule. | 2012-03-14 | EN 3155-035:2006 |
3182:2012 | Aerospace. Ball bearings, rigid, corrosion resistant cadarious steel, for control cable pulleys. Dimensions and loads. | 2012-03-14 |
|
3278:2012 | Aerospace Material. Winged head tubular sleeves, in corrosion resistant steel, passivated (wall thickness 0.25 mm). | 2012-03-14 |
|
3355:2012 | Aerospace. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealing. Extruded section-≤ 150 mm-900 MPa≤ Rm≤ 1 160 MPa. | 2012-03-07 |
|
3373-007:2012 | Aerospace. Terminals and elongators for enspending on electrical conductors. Part 007: nickel-plated aluminium terminals for use on nickel-plated aluminium cables for studs with a metric thread. Product Standard. | 2012-03-14 |
|
3373-008:2012 | Aerospace Material. Terminals and elongators for enspending on electrical conductors. Part 008: circular nickel-plated copper terminals, for use on nickel-plated copper connectors for studs with a metric thread at a temperature exceeding 340 ° C. Product Standard. | 2012-03-14 |
|
3382:2012 | Aerospace Material. Internal retention rings for axial, steel, phosphatic mounting. | 2012-03-07 |
|
3383:2012 | Aerospace. Internal retention rings for axial, steel, vacuum-cated mounting. | 2012-03-07 |
|
3384:2012 | Aerospace. Outer retention rings for axial, steel, phosphated assembly. | 2012-03-07 |
|
3385:2012 | Aerospace. External retention rings for axial, steel, vacuum-cated mounting. | 2012-03-07 |
|
3386:2012 | Aerospace. Retaining rings for radial, steel, phosphatic mounting. | 2012-03-07 |
|
3417:2012 | Aerospace. Flattened spherical head solid rivets, in nickel-based alloy NI-P11, metric series. | 2012-03-07 |
|
EN 3475-505:2012 | Aerospace. Electrical cables for use in aircraft. Test methods. Part 505: Resistance to driver and fiber traction. | 2012-03-07 | EN 3475-505:2007 |
EN 3706:2012 | Aerospace material. Headless threaded pegs, cruciform hollow, in 5086 aluminium alloy. | 2012-03-14 |
|
EN 3707:2012 | Aerospace material. Headless threaded pegs. Installation holes. | 2012-03-14 |
|
3768:2012 | Aerospace Material. Removable, self-braking, fixed nuts, simple pin, reduced series, with retorted, in heat-resistant steel, lubricated MoS2. Ranking: 1 100 MPa (at room temperature)/315 ° C. | 2012-03-07 |
|
4443:2012 | Aerospace. Self-braking elliptical head nuts with MJ threads, in heat-resistant steel FE-PA2601 (A286), with MoS2 coating. Ranking: 900 MPa (at room temperature)/425 ºC. | 2012-03-07 |
|
6049-006:2012 | Aerospace. Electrical cables, installation. Protective sheath in meta-aramides fibers. Part 006: Self-enveloping protective cover, flexible after installation. Product Standard. | 2012-03-14 |
|
6049-007:2012 | Aerospace Material. Electrical cables, installation. Protective sheath in meta-aramides fibers. Part 006: Self-surround protective function, flexible after installation, operating temperatures from -55 ° C to 260 ° C. Product Standard. | 2012-03-14 |
|
13484:2012 | Cascos for sleds users. | 2012-02-29 | UNE-EN 13484:2002 |
| Winter Maintenance Teams. Snowplows. Part 2: Test criteria and their requirements. | 2012-02-29 |
|
15949:2012 | Machine security. Safety requirements for rolling trains, structural steel rolling mills and wire-rod rolling mills. | 2012-02-29 |
|
EN 50173-1:2011 | Information technology. Generic cabling systems. Part 1: General requirements. | 2011-05-27 |
|
50411-2-4:2012 |
Organizers and fiber wrappers used in optical fiber communication systems. Product specifications. Part 2-4: Selside of the Type 1 fiber enclosure, for S & A. | 2012-02-10 |
|
60512-7-2:2011 | Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Part 7-2: Impact tests (free connectors). Essay 7b: Mechanical impact resistance. | 2012-02-03 |
|
60512-9-2:2012 | Connectors for electronic equipment. Tests and measurements. Part 9-2: Endurance tests. Test 9b: Electrical load and temperature. | 2012-02-17 |
|
60512-27-100:2012 | Connectors for electronic equipment. Tests and measurements. Part 27-100: Signal integrity tests up to 500 MHz of the IEC 60603-7 series of connectors. Essay 27 to 27g. | 2012-02-17 |
|
60676:2012 | Electrothermic Equipment. Test methods for direct arc furnaces. | 2012-02-03 |
|
60793-2:2012 | Fiber optics. Product Specification: Part 2: Generalities. | 2012-02-24 |
|
60819-1:2012 | Specifications for non-cellulosic papers for electrical uses. Part 1: General definitions and requirements. | 2012-02-17 |
|
60874-1-1:2012 | Optical fiber interconnect devices and passive components. Connectors for cables and optical fibers. Part 1-1: Particular frame specification. | 2012-02-10 |
|
61274-1-1:2012 | Optical fiber interconnect devices and passive components. Adapters for fiber optic connectors. Part 1-1: Particular framework specification. | 2012-02-10 |
|
61314-1-1:2012 | Optical fiber interconnect devices and passive components. Output divergences for fiber optics. Part 1-1: Particular frame specification. | 2012-02-10 |
|
61969-1:2012 | Mechanical structures for electronic equipment. Weathering containers. Part 1: Design Guide. | 2012-02-10 |
|
61969-2:2012 | Mechanical structures for electronic equipment. Weathering containers. Part 2: Coordination dimensions. | 2012-02-10 |
|
61969-3:2012 |
Mechanical structures for electronic equipment. Weathering containers. Part 3: Environmental requirements, essays, and security aspects. | 2012-02-10 |
|
62110:2009 | Levels of electric and magnetic fields generated by the AC power systems. Procedures for measuring human exposure levels. | 2009-12-23 |
|
62137-3:2012 | Electronic mount technology. Part 3: Guidance for the selection of environmental and endurance test methods for welding joints. | 2012-01-20 |
|
62149-1:2012 | Active optical fiber devices and components. Operating rules. Part 1: Generalities and guidance. | 2012-02-17 |
|
62387-1:2012 | Radioprotection Instrumentation. Passive integrated dosimetry systems for environmental and personal control. Part 1: General features and operating requirements. | 2012-02-10 |
|
62572-3:2012 | Active optical fiber components and devices. Standards of reliability. Part 3: Laser modules used for telecommunication. | 2012-02-10 |
|
62595-1-2:2012 | Backlighting unit for liquid crystal displays (LCDs). Part 1-2: Terminology and symbols. | 2012-02-17 |
|
62604-2:2012 |
Surface Acoustic Wave and Acoustic Wave of Sustrate. Part 2: User's Guide. | 2012-02-03 |
|
ISO 9241-143:2012 |
Man-System Interaction Ergonomics-Part 143: Forms (ISO 9241-143:2012). | 2012-03-01 |
|
ISO 12855:2012 | Peage electronic. Exchange of information between the provider and the toll service collector (ISO 12855:2012). | 2012-02-15 |
|
EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment by an environmental study comprising the physical measurements and subjective responses of people (ISO 28802:2012). | 2012-03-01 |
|
Physical environment ergonomics. Application of international standards to persons with special needs. (ISO 28803:2012). | 2012-03-15 |
|