Key Benefits:
Obtained the verification of the Plan of Studies by the Council of Universities, prior to the positive report of the National Agency for the Evaluation of Quality and Accreditation (ANECA).
Established the official character of the title by Agreement of the Council of Ministers of 15 April 2011 (published in the BOE of 11 May 2011 by Resolution of the General Secretariat of Universities of 26 April 2011).
For the purposes of compliance with the provisions of Article 35.4 of the Organic Law 6/2001 of 21 December, of Universities, and in the wording given by the Organic Law of 12 April 2007, which states that the Rectors and the Universities must order the publication in the Official Journal of the State (BOE) and in the Official Journal of Galicia (DOG), in this case, of the first paragraph of section 5.1 of the Memory for the application for verification of titles According to Annex I of the RealDecree 1393/2007 of 29 October 2008, according to the statement of 14 October 2008, the Deputy General Directorate of Academic Coordination and Legal Regime of the Ministry of Science and Innovation, relating to the structure of the teachings, and according to Article 26 the Decree 861/2010 of 2 July 2010.
This Rectorate resolves: Publish the curriculum leading to the obtaining of the official degree of university master's degree in Technologies and Processes in the Automobile Industry that is listed in the Annex to this resolution.
Vigo, April 21, 2012. -The Rector, Salustiano Mato of the Church.
ANNEX
UNIVERSITY MASTER IN TECHNOLOGIES AND PROCESSES IN THE AUTOMOTIVE INDUSTRY
Knowledge Branch: Engineering and Architecture
participating universities: Vigo
Table 1. Distribution of ECTS credits according to type of material
|
| 20 |
| Optives | 34 |
| 0 | |
|
End Master | 6 |
| Total Credits | 60 |
Table 2. Master's, credits, and modules
Specialty: Technology
| ECTS | Character | ||||
|---|---|---|---|---|---|
| 4 | Required. | Sector Knowledge and Skills | |||
| Project Management. | 3 | Required. | |||
|
End of Master. | 6 | Required. | |||
|
, Prevention Systems, and HR. |
5 | Required. | |||
|
Maintenance and Environment in Automotive. | 4 | Required. | |||
|
4 | Required | ||||
| 4 | |||||
| 4 | |||||
| 4 | 5 | 5 |
Technologies in the Auto Industry |
Tests and Trends. |
6.5 | Optional. |
|
and Electronic Systems. | 5.5 | Optional. | |||
|
5.5 | Optional | ||||
|
Introduction to the Process Development and Structure. | 7.5 | Optional. | |||
|
Dynamic Systems. |
4 | Optional. |
Craft: Processes
| ECTS | Character | |
|---|---|---|
| 4 | Required. | Sector Knowledge and Skills |
| Project Management. | 3 | Required. |
|
End of Master. | 6 | Required. |
|
, Prevention Systems, and HR. |
5 | Required. |
|
Maintenance and Environment in Automotive. | 4 | Required. |
|
4 | Required | |
| 4 | ||
| 4 | ||
| 4 The_izq"> Quality and Security in Herrage body. | 3 |
Processes in the Auto Industry |
|
Industrialization in the Herrage. |
4 | Optional. |
|
Management in Stampation. | 4 |
Optional. |
|
The Pieces and Stampware. | 4 | Optional. |
|
Introduction to the Stampation Process and Materials. | 5 | Optional. |
|
Procedures. | 7 | Optional |
| The_table_table_izq"> Process Machines and Manipulators for Stampation. | 4 | Optional. |
| Introduction to the Herrage process. | 3 | Optional. |
In order to obtain the degree of Master's degree in Technologies and Processes in the Automobile Industry, the students must exceed the 60 ECTS of which the master's degree is present.
