Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the case of annulment of the rules submitted by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, Royal Decree 1614/1985 of 1 August 1985 and recognised by the additional provision of Royal Decree 2200/1995 of 28 December
,This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE annulled during the month of January 2015, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, 11 February 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Rules nullified in January 2015
Title | |||
---|---|---|---|
50441-1:2006 |
Cables for indoor residential telecommunications facilities. Part 1: Unshielded tables. Grade 1. (ratified by AENOR in October 2006. | ||
50441-2:2006 | Cables for indoor residential telecommunications facilities. Part 2: Shielded tables. Grade 2. (ratified by AENOR in October 2006. | ||
60384-2:2005 | Fixed connectors for use in electronic equipment. Part 2: Intermediate specification. Continuous stream capacitors with dielectric integrated with fixed metallized polyethylene terephthalate film. (Ratified by AENOR in February 2006. | ||
60384-13:2006 | Fixed densants for use in electronic equipment. Part 13: Intermediate specification: C.c. condensers of metal sheets of polypropyl dielectric film. (Ratified by AENOR in April 2006. | ||
60384-21:2004 | Fixed densants for use in electronic equipment. Part 21: Intermediate specification: Ceramic dielectric condensers mounted on multi-layer fixed surfaces, Class 1 (Ratified by AENOR in March 2005 | ||
60384-22:2004 | Fixed condensers for use in electronic equipment. Part 22: Intermediate specification: Ceramic dielectric condensers mounted on multi-layer fixed surfaces, Class 2 (Ratified by AENOR in March 2005 | ||
60544-5:2003 | Electrical insulating materials. Determination of the effects of ionising radiation. Part 5: Procedures for estimating aging in service. (Ratified by AENOR in July 2003 | ||
EN 60793-2:2008 | Fiber optics. Product Specification: Part 2: Generalities. (Ratified by AENOR in July 2008. | ||
62149-1:2004 | Active optical fiber devices and components. Operating rules. Part 1: Generalities and Guidance (Ratified by AENOR in April 2004 | ||
0002:1990 IN | Children's safety and standards. General principles | ||
20460-7-715:2006 | Electrical installations in buildings. Part 7-715: Rules for facilities and special sites. Very low voltage lighting installations | ||
21175-1:1992 | Electrical test methods for electrical cables. Electrical tests for voltage cables less than or equal to 450/750 V. |
21302-111:2000 | Electrotechnical Vocabulary. Chapter 111: Physics and Chemistry |
une 21302-111:2000/1m: 2006 | Electrotechnical Vocabulary. Chapter 111: Physics and Chemistry | ||
57077:1988 | Role. Specifications for unexpired papers for offset printing | ||
57152-1:1990 | Paper and cardboard. Determination of the resistance to the grubbing-up. Accelerated speed method with the IGT apparatus. Part 1: (Electric Model) | ||
57164:1994 | Paper. Characteristics of the paper for undulating components of corrugated cardboard | ||
58406:1995 | Maintenance trucks. Hairpin arms with hook and board-accessory boards. Mounting dimensions | ||
58440:2003 | Maintenance trucks and automotive industrial tractors. Braking and resistance of brake elements | ||
80211:1994 EX | Cement test methods. Chemical analysis. Determination of the chemical composition of cales and X-rays by X-ray fluorescence | ||
135335:2005 | Vertical Senalization. Natural ageing test. Method of direct exposure. Test features and method. | ||
200000-107:2001 IN | Electrotechnical Guides. Guide 107: Electromagnetic compatibility. Guidance for writing electromagnetic compatibility rules | ||
200000-108:2001 IN | Electrotechnical Guides. Guide 108: Relationship between technical committees with horizontal functions and product committees and use of basic standards | ||
200003:2001 IN | Questionnaires for the declaration of the materials that make up the electrical and electronic products. Basic guidelines. | ||
211620:2012 | Distribution electrical cables with extruded insulation and voltage aluminium tube display assigned from 3 ,6/6 (7, 2) kV to 20 ,8/36 (42) kV. | ||
UNE-EN 71-1:2012 | Safety of toys. Part 1: Mechanical and physical properties | ||
UNE-EN 50144-1/A1:2003 | Security of powered hand-operated manual tools electrical. Part 1: General requirements | ||
UNE-EN 50144-1/A2:2004 | Security of the portable manual tools powered by electric motor. Part 1: General requirements | ||
UNE-EN 50144-1:2001 | Security of the portable manual tools powered by electric motor. Part 1: General requirements | ||
UNE-EN 50144-1:2001 CORR: 2006 | Security of electric motor powered hand tools. Part 1: General requirements | ||
UNE-EN 50144-2-7 CORR: 2003 | Security of the portable hand tools powered by electric motor. Part 2-7: Particular requirements for spray guns | ||
UNE-EN 50144-2-7:2002 | Security of portable hand tools powered by electric motor. Part 2-7: Particular requirements for spray guns | ||
UNE-EN 50164-7:2009 | Lightning protection components (CPCR). Part 7: Requirements for composites that improve grounding. | ||
UNE-EN 50260-1:2003 | Machine tools security Battery-powered electric motor powered laptops, and battery blocks. Part 1: General requirements | ||
UNE-EN 50260-2-7:2003 | Security of engine powered hand-operated hand tools Battery-powered electric power and battery blocks. Part 2-7: Particular requirements for spray guns | ||
UNE-EN 60662/A10:1998 | High-pressure sodium vapor lamps. | ||
UNE-EN 60662/A4:1997 | High-pressure sodium vapor lamps. | ||
UNE-EN 60662/A5:1997 | High-pressure sodium vapor lamps | ||
UNE-EN 60662/A6:1997 | High-pressure sodium vapor lamps. | ||
UNE-EN 60662/A7:1997 |
High Pressure Sodium Vapor Lamps | ||
UNE-EN 60662/A9:1998 | High-pressure sodium vapor lamps. | ||
UNE-EN 60662:1996 | The high-pressure-sodium-vapor Lamparas | ||
UNE-EN 61217/A1:2001 | Equipment used in radiotherapy. Coordinates, moves, and scales. | ||
UNE-EN 61217:1999 | Equipment used in radiotherapy. Coordinates, moves, and scales. | ||
UNE-EN 61217:1999/A2:2008 | Equipment used in radiotherapy. Coordinates, moves, and scales. | ||
UNE-EN 61347-2-2 CORR: 2003 | Lamp Control Devices. Part 2-2: Particular requirements for electronic reductive converters fed in continuous current or alternating current for filament lamps | ||
UNE-EN 61347-2-2:2002 | Lamp Control Devices. Part 2-2: Particular requirements for electronic reductive converters fed in continuous current or alternating current for filament lamps | ||
UNE-EN 61347-2-2:2002 CORR: 2011 | Lamp Control Devices. Part 2-2: Particular requirements for electronic-reducing converters fed in continuous current or alternating current for filament lamps | ||
UNE-EN 61347-2-2:2002/A1:2006 | Lamp Control Devices. Part 2-2: Particular requirements for electronic-reducing converters fed in continuous current or alternating current for filament lamps (IEC 61347-2-2:2000/A1:2005) | ||
UNE-EN 61347-2-2:2002/A1:2006 CORR: 2007 | Lamp Control Devices. Part 2-2: Particular requirements for electronic-reducing converters fed in continuous current or alternating current for filament lamps | ||
UNE-EN 61347-2-2:2002/A2:2006 | Lamp Control Devices. Part 2-2: Particular requirements for electronic-reducing converters fed in continuous current or alternating current for filament lamps (IEC 61347-2-2:2000/A2:2006 | ||
UNE-EN 61347-2-7:2007 | Lamp Control Devices. Part 2-7: Particular requirements for continuous current-stream electronic ballasts for emergency lighting (IEC 61347-2-7:2006) | ||
UNE-EN 61347-2-7:2007 CORR: 2011 |
Lamp Control Devices. Part 2-7: Particular requirements for electronic ballasts fed in continuous current for emergency lighting | ||
UNE-EN 61701:2000 | Corrosion Test by Saline Fog (FV). | ||
UNE-EN 62013-2:2007 | helmet Lamparas for use in mines with a risk of grisu. Part 2: Operation and other security-related issues. (IEC 62013-2:2005) | ||
UNE-EN ISO 21647:2009 | Electromedical Equipment. Particular requirements for the basic safety and essential performance characteristics of the respiratory gas monitors. (ISO 21647:2004, including Cor 1:2005) | ||
UNE-IEC GUIA 109:2009 IN | Environmental aspects. Inclusion in the product electrotechnical standards |