Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the file of the rules approved by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985 of 1 August 1985 and recognized by the additional provision of Royal Decree 2200/1995 of 28 December
,This Directorate General has decided to publish in the "Official State Gazette" the relationship of Spanish standards UNE approved by the Spanish Association for Standardisation, corresponding to the month of December 2014, identified by its title and numerical code, which is annexed to this resolution.
This resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, January 26, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Edited rules in the month of December 2014
Title | |||
---|---|---|---|
UNE 27250:2014 | Civil shipbuilding and repair. Standard components. Oval record with brazola. |
| |
27252:2014 | Civil shipbuilding and repair. Standard components. Scraped oval record. |
| |
27253:2014 | Civil shipbuilding and repair. Standard components. Frias for oval records. |
| |
27261:2014 | Civil shipbuilding and repair. Standard components. Circular record without brazola |
| |
27263:2014 | Civil shipbuilding and repair. Standard components. Frisas for circular records. |
| |
27272:2014 | Shipbuilding and repair civil. Standard components. Machine camera ladder (55º). |
| |
27310:2014 | Construction and repair Civil naval. Standard components. Steel sleeves for pipe bonding. |
| |
27314:2014 | Construction and repair Civil naval. Standard components. Flat steel flanges for connecting to butterfly valves. |
| |
27420:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Steel stretched out. |
| |
27421:2014 | Construction and civil naval repair. Selective lists. Pipes and Accessories: Steel welded. |
| |
27422:2014 | Construction and civil naval repair. Selective lists. Pipes and fittings: Stainless steel tubing. |
| |
27423:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Stainless steel tubes. |
| |
27426:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Copper tubes. |
| |
27430:2014 | Shipbuilding and ship repair civil. Selective lists. Pipes and fittings: Codos for steel tubing. |
| |
27431:2014 | Construction and civil naval repair. Selective lists. Pipes and fittings: Steel pipe reductions. |
| |
27432:2014 | Construction and civil ship repair. Selective lists. Pipes and fittings: T-pieces for steel tubing. |
| |
27441:2014 | Construction and civil ship repair. Selective lists. Pipes and Accessories: Steel sliders. |
| |
27442:2014 | Construction and civil naval repair. Selective lists. Pipes and Accessories: Crazy Brida with hoop. |
| |
27443:2014 | Construction and repair Civil naval. Selective lists. Pipes and accessories: Mad-mad flange with neck hoop. |
| |
27445:2014 | Construction and civil naval repair. Selective lists. Pipes and fittings: Steel flanges with neck to butt. |
| |
2748:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Stainless steel tubes (ASTM-ANSI). |
| |
27482:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Steel stretched tubes (ASTM-ANSI). |
| |
27483:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: forged steel sleeves for pipe bonding (ASTM-ANSI). |
| |
27485:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Codos for steel tubing (ASTM-ANSI). |
| |
27486:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Steel pipe reductions (ASTM-ANSI). |
| |
27487:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: T-pieces for steel tubing (ASTM-ANSI). |
| |
27488:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and Accessories: Steel Slider (ASTM-ANSI). |
| |
27489:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Steel flanges with butt-weld neck (ASTM-ANSI). |
| |
27490:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and fittings: Glass fiber reinforced polyester (GRP) pipe (ASTM). |
| |
27491:2014 | Construction and Civil Naval Repair. Selective lists. Pipes and Accessories: Cuprickel Tubes (CUNI) (DIN) |
| |
27584:2014 | Construction and civil ship repair. Standard components. Ventilation hoses and grids: Fixed ventilation grid (free passage area < 0.6 m2). |
| |
27587:2014 |
Civil shipbuilding and repair. Standard components. Register for structural ventilation ducts. |
| |
27652:2014 | Construction and civil naval repair. Standard components. Pletina clamp. | UNE 27657-2:1977 | |
27653:2014 | Shipbuilding and ship repair civil. Standard components. Carbon steel round clamp for piping. |
| |
27654:2014 | Construction and civil naval repair. Standard components. Stainless steel round bracket for piping. |
| |
27657:2014 | Construction and civil naval repair. Standard components. Pipe supports: U-plate support for tubing with pletina clamp. | UNE 27657-1:1977 UNE 27657-3:1977 | |
UNE 27658:2014 | Civil shipbuilding and repair. Standard components. Pipe supports: Long angular support for tubing with pletina clamp. | UNE 27658:1978 | |
27659:2014 | Construction and Civil Naval Repair. Standard components. Pipe supports: Short-angle support for tubing with pletina clamp. | UNE 27659:1977 | |
27662:2014 | Construction and Civil Naval Repair. Standard components. Pipe Supports: A "O"-type pin-plate support for tubing with pletina clamp. | UNE 27662:1977 | |
27663:2014 | Civil shipbuilding and repair. Standard components. Pipe supports: A support for a type "A" pin for tubing with a plate bracket. | UNE 27663:1977 | |
27665:2014 | Civil shipbuilding and repair. Standard components. Long angular polin for pipe with round clamp. |
| |
27666:2014 | Construction and Civil Naval Repair. Standard components. Short-angle support for pipe with round clamp. |
| |
27670:2014 | Construction and Civil Naval Repair. Standard components. Pletina clamp for cuprickel pipes (CUNI). |
| |
27671:2014 | Construction and Civil Naval Repair. Standard components. Angular support with cucroniquel tubing (CUNI) clamp. |
| |
27672:2014 | Construction and Civil Naval Repair. Standard components. T-support with couprickel tubing (CUNI) clamp. |
| |
48103:2014 | Paintings and varnishes. Normalized colors. | UNE 48103:2002 | |
53016:2014 | Plastics. Determination of the compression factor of the molding materials. | UNE 53016:1982 | |
54131-2:2014 | Requirements for the formalization of the technical characteristics of the printed graphic product, according to its typology, during the design process. Part 2: Method for formalizing the technical characteristics of printed communication or advertising products. |
| |
54131-3:2014 | Requirements for the formalization of the technical characteristics of the printed graphic product, according to its typology, during the design process. Part 3: Method for formalizing the technical characteristics of printed editorial products. |
| |
54131-4:2014 | Requirements for the formalization of the technical characteristics of the printed graphic product, according to its typology, during the design process. Part 4: Method for formalizing the technical characteristics of printed industrial products. |
| |
56875:2014 | Kitchen furniture. Specifications, requirements, and test methods. | UNE 56841:2001 UNE 56842:2001 UNE 56843:2001 UNE 56842:2002 ERRATUM | |
56875:2014 V2 | Kitchen furniture. Specifications, requirements, and test methods. | UNE 56875:2014 | |
60631-1:2014 | CNG service stations for motor vehicles. Part 1: Supply capacity stations greater than 20 m3/h. | UNE 60631-1:2008 | |
81599:2014 | Exposition in the workplace. Determination of airborne particles (inhalable, thoracic and breathable fractions). Gravimetric method. | UNE 81599:1996 | |
83980:2014 | Concrete Durability. Test methods. Determination of water absorption, density and porosity accessible to concrete water. |
| |
84610:2014 |
Cosmetic raw materials. Isostearyl isostearate. | UNE 84610:1996 | |
84613:2014 | Cosmetic raw materials. Myristille lactate. | UNE 84613:1996 | |
84638:2014 | Cosmetic raw materials. Isopropyl isostearate. | UNE 84638:1998 | |
171330-2:2014 | Environmental quality in interiors. Part 2: Internal environmental quality inspection procedures. | UNE 171330-2:2009 | |
171370-1:2014 | Amianto. Part 1: Qualification of companies working with asbestos materials. |
| |
192001-10:2014 | Inspection procedure in establishments affected by the regulation of major accidents involving dangerous substances. Part 10: Evaluation of the implementation of the internal emergency plan. |
| |
212016:2014 | Metal Cables with multiple elements used for data transmission for voltages less than or equal to 250 V. | EA 0016:2003 | |
UNE-EN 81-22:2014 | Build and Security Rules installation of lifts. Lifts for the transport of persons and loads. Part 22: Electric elevators with a tilted path. |
| |
UNE-EN 250:2014 | Teams respiratory. Autonomous diving equipment of open air circuit of compressed air. Requirements, essays, and marking. | UNE-EN 250:2001 UNE-EN 250:2001/A1:2006 | |
UNE-EN 289:2014 |
Machinery for plastics and rubber. Compression and transfer moulding machines. Security requirements. | UNE-EN 289:2005 + A1:2008 | |
UNE-EN 415 -1:2014 | Security of the packing machines. Part 1: Terminology and classification of packaging machines and associated equipment. | UNE-EN 415 -1:2000 + A1:2009 | |
UNE-EN 508-1:2014 | Metal sheet coating and coating products. Specification for the self-supporting products of steel, aluminium or stainless steel sheet. Part 1: Steel. | UNE-EN 508-1:2010 | |
UNE-EN 957-6:2011 + A1:2014 | Fixed equipment for training. Part 6: Career simulators, specific security requirements, and additional test methods. | UNE-EN 957-6:2011 | |
UNE-EN 1143-2:2014 | Security storage units. Requirements, classification and test methods for the resistance to theft. Part 2: Repository systems. | UNE-EN 1143-2:2002 | |
UNE-EN 1325:2014 | Managing the value. Vocabulary. Terms and definitions. | UNE-EN 1325-1:1996 UNE-EN 1325-2:2005 | |
UNE-EN 1400:2013 + A1:2014 |
Child care articles. Baby pacifiers and toddlers. Security requirements and test methods. | UNE-EN 1400:2013 | |
UNE-EN 1514-2:2014 | Bridas and their unions. Measures of the joints for flanges designated by PN. Part 2: Spiral parts for use with steel flanges. | UNE-EN 1514-2:2005 | |
Diving Team. Hydrostatic vest. Functional and security requirements and test methods. | UNE-EN 1809:1998 | ||
UNE-EN 12021:2014 | Respiratory Protection Equipment. Compressed air for insulating respiratory protective equipment. | UNE-EN 12021:1999 | |
UNE-EN 12183:2014 | Manual Propulsion Sillas. Testing requirements and methods. |
| |
UNE-EN 12184:2014 | Motor wheel sils electric, scooters and their chargers. Testing requirements and methods. |
| |
UNE-EN 12201-22012 + A1:2014 | Pipeline Systems in plastic materials for water and sanitation conduction with pressure. Polyethylene (PE). Part 2: Tubes. | UNE-EN 12201-2:2012 | |
UNE-EN 12377:2014 | Packaging and Packaging. Flexible tubes. Test to verify the air tightness of the shutter plugs. | UNE-EN 12377:2001 | |
UNE-EN 12732:2014 + A1:2014 |
gas infrastructure. Welding of steel pipes. Functional requirements. | UNE-EN 12732:2014 | |
UNE-EN 12873-1:2014 | Influence of Materials on water intended for human consumption. Influence of migration. Part 1: Test method of industrial manufacturing materials consisting of or containing organic or vitreous materials (vitreous or porcelain enamels). | UNE-EN 12873-1:2004 |
|
UNE-EN 13000:2010 + A1:2014 | Load-lifting devices suspended. Mobile cranes. | UNE-EN 13000:2010 UNE-EN 13000:2010 ERRATUM: 2010 | |
UNE-EN 13451-10:2014 |
Equipment for swimming pools. Part 10: Specific safety requirements and additional testing methods for jump platforms, jump trampolines and associated equipment. | UNE-EN 13451-10:2004 | |
UNE-EN 13451-11:2014 | Swimming Pool Equipment. Part 11: Specific safety requirements and additional testing methods for mobile pool and mobile panels. | UNE-EN 13451-11:2004 | |
UNE-EN 13523-2:2014 | Continuous-band-painted metal. Test methods. Part 2: Brillo. | UNE-EN 13523-2:2001 | |
UNE-EN 13523-3:2014 | Continuous-band painted metals. Test methods. Part 3: Color difference. Instrumental Comparison. | UNE-EN 13523-3:2001 | |
UNE-EN 13523-4:2014 | Band-painted metals continues. Test methods. Part 4: Dureza according to the pencil method. | UNE-EN 13523-4:2001 | |
UNE-EN 13523-9:2014 | Metals Continuous band painted. Test methods. Part 9: Water immersion resistance. | UNE-EN 13523-9:2002 | |
UNE-EN 13523-25:2014 | Metal-painted metal-sheet continues. Test methods. Part 25: Resistance to humidity. | UNE-EN 13523-25:2007 | |
UNE-EN 13946:2014 | Water quality. Guidance for routine sampling and pre-treatment of benthic river and lake diatomeas. | UNE-EN 13946:2004 | |
UNE-EN 13963:2014 |
A gasket material for gypsum boards. Definitions, specifications, and test methods. |
| |
UNE-EN 14067-4:2014 | Applications railway. Aerodynamics. Part 4: Outdoor aerodynamic testing requirements and procedures. | UNE-EN 14067-2:2003 UNE-EN 14067-4:2006 + A1:2010 | |
UNE-EN 14116:2013 + A1:2014 | Cisternas for the transport of dangerous goods. Digital interface for the product recognition device. | UNE-EN 14116:2013 | |
UNE-EN 14122:2014 | Foodstuffs. Determination of vitamin B1 by high resolution liquid chromatography. | UNE-EN 14122:2003 UNE-EN 14122 :2003/AC: 2007 | |
UNE-EN 14184:2014 | Water Quality. Guide to the study of water macrophytes in water courses. | UNE-EN 14184:2004 | |
UNE-EN 14190:2014 |
|
| |
UNE-EN 14420-3:2014 | Accessories for hoses with fastening elements. Part 3: Abrazaderas subject to screws or pins | UNE-EN 14420-3:2005 | |
UNE-EN 14420-5:2014 | Accessories for hoses with fastening elements. Part 5: threaded connections. | UNE-EN 14420-5:2005 | |
UNE-EN 14420-7:2014 | Accessories for hoses with fastening elements. Part 7: Levas achoplings. | UNE-EN 14420-7:2005 + A1:2007 | |
UNE-EN 14427:2014 | Teams and LPG accessories. Bottles of composite material, portable and refillable, for liquefied petroleum gases (LPG). Design and manufacture. | UNE-EN 14427:2004 UNE-EN 14427:2004/A1:2006 | |
UNE-EN 14893:2014 |
Equipment and accessories for LPG. Welded steel drums for the transport of liquefied petroleum gases (LPG) with a capacity of between 150 litres and 1 000 litres. | UNE-EN 14893:2008 | |
UNE-EN 15039:2014 | Chemicals used in the treatment of water intended for human consumption. Anti-fouling products for membranes. Polycarboxylic acids and their salts. | UNE-EN 15039:2007 | |
UNE-EN 15051-1:2014 | Exposition in the place of work. Measurement of the dust emission capacity of bulk materials. Part 1: Requirements and choice of test methods. | UNE-EN 15051:2007 | |
UNE-EN 15051-2:2014 | Exposition in the workplace. Measurement of the dust emission capacity of bulk materials. Part 2: Rotating drum method. | UNE-EN 15051:2007 | |
UNE-EN 15051-3:2014 | Exposition in the place of work. Measurement of the dust emission capacity of bulk materials. Part 3: Continuous drop method. | UNE-EN 15051:2007 | |
UNE-EN 15306:2014 | Outdoor sports. Exposure of artificial grass to simulated use. | UNE-EN 15306:2008 | |
UNE-EN 15383 + A1:2014 | Pipeline Systems in Plastic Materials for Evacuation and Sanitation. Glass reinforced thermosetting plastics (PRFV) based on unsaturated polyester resin (UP). Log wells and inspection cameras. |
| |
UNE-EN 15458:2014 | Paintings and varnishes. Laboratory method for testing the efficacy of film preservatives of a coating against algae. | UNE-EN 15458:2008 | |
UNE-EN 16247-2:2014 | Energy Audits. Part 2: Buildings. | UNE 216501:2009 | |
UNE-EN 16247-3:2014 | Energy Audits. Part 3: Processes. |
| |
UNE-EN 16247-4:2014 | Energy Audits. Part 4: Transport. |
| |
UNE-EN 16272-3-2:2014 | Railway Applications. Via. Acoustic barriers and related devices acting on the aerial propagation of sound. Test method for determining sound performance. Part 3-2: Standard rail noise spectrum and unique classification number for direct field applications. |
| |
UNE-EN 16317:2014 | Fertilizers. Determination of trace elements. Determination of arsenic by atomic emission spectrometry with inductive coupling plasma (ICP-AES), after dissolution in water regia. |
| |
UNE-16323:2014 | Glossary of Wastewater Technical Terms. |
| |
UNE-16350:2014 | Protection Gloves. Electrostatic properties. |
| |
UNE-EN 16413:2014 | Air quality. Biosafety with lichens. Assessment of the diversity of epiphytic lichens. |
| |
UNE-EN 16414:2014 | Air environment. Biosafety with mosses. Accumulation of air pollutants in musgos collected on site: from collection to sample preparation. |
| |
UNE-EN 16436-1:2014 | Mangueras and elastomer and plastic tubes used for propane, butane and their mixtures in vapor phase. Part 1: Manguages and pipes. |
| |
UNE-EN 16457:2014 | Characterization of Waste. Framework for the elaboration and implementation of a test programme. Goals, schedule, and report. |
| |
UNE-EN 16479:2014 | Water quality. Performance requirements and conformity testing procedures for water monitoring equipment. Automatic devices for sampling (sampling) of water and wastewater. |
| |
UNE-EN 16482:2014 | Foundry. Casting bars by continuous casting. |
| |
UNE-EN 16492:2014 | Paintings and varnishes. Assessment of surface disfigurement caused by fungi and algae on coatings. |
| |
UNE-EN 16565:2014 |
Packaging and Packaging. Flexible tubes. Test method for determining the orientation of the collapsible cap. |
| |
UNE-EN 16566:2014 | Paintings and varnishes. Plastes or masillas for indoor and outdoor work. Adapting the plastes or putty to European standards. |
| |
UNE-EN 50050-1:2014 | Manual electrostatic spray equipment. Security requirements. Part 1: Manual spraying equipment for flammable liquid coating materials. |
| |
UNE-EN 50050-2:2014 |
Manual electrostatic spraying equipment. Security requirements. Part 2: Manual spraying equipment for flammable dust layer. |
| |
UNE-EN 50050-3:2014 | Manual electrostatic spray equipment. Security requirements. Part 3: Manual spraying equipment for flammable " flock. |
| |
UNE-EN 50130-4:2011/A1:2014 | Alarm Systems. Part 4: Electromagnetic compatibility. Product Family Standard: Immunity requirements for fire detection, intrusion, docking, CCTV, access control, and social alarm systems components. |
|
|
UNE-EN 50131-6:2008/A1:2014 | Alarm systems. Intrusion and docking alarm systems. Part 6: Power supplies. |
| |
UNE-EN 50131-10:2014 | Alarm systems. Intrusion and docking alarm systems. Part 10: Application-specific requirements for monitored facility transceivers (SPTs) |
| |
UNE-EN 50539-11:2013/A1:2014 | Low voltage transient surge protection devices. Transient surge protection devices for specific applications including continuous current. Part 11: Requirements and assays for DPS in PV applications. |
| |
UNE-EN 50625-1:2014 | Requirements for the collection, logistics, and treatment of WEEE. Part 1: General treatment requirements. |
| |
UNE-EN 55016-4-2:2012/A1:2014 |
|
| |
UNE-EN 60079-20-1:2014 | Atmosphere explosive. Part 20-1: Characteristics of the materials for the classification of gases and vapours. Test methods and data. | EN 60079-20-1:2010 | |
UNE-EN 60317-0-3:2008/A1:2014 | Specifications for particular types of threads for electromagnetic coils. Part 0-3: General requirements. Glazed circular section aluminum thread. |
| |
UNE-EN 60335-2-56:2005/A2:2014 | Appliances and Analog Appliances. Security. Part 2-56: Particular requirements for projectors and analog devices. |
| |
UNE-EN 60335-2-101:2004/A2:2014 | Appliances and Analog Appliances. Security. Part 2-101: Particular requirements for vaporizers. |
| |
UNE-EN 61400-23:2014 | Aerogenerators. Part 23: Real-scale structural blade tests. |
| |
UNE-EN 62196-2:2012/A12:2014 | Bases, pegs, vehicle connectors, and vehicle entries. Conductive load of electric vehicles. Part 2: Dimensional Compatibility and Interchangeability Requirements for Spare Accessories and Alveoli on alternating current. |
| |
UNE-EN 62196-3:2014 | Bases, pins, vehicle connectors, and vehicle entries. Conductive load of electric vehicles. Part 3: Dimensional compatibility and interchangeability requirements for vehicle couplers of spikes and alveoli in continuous current and alternating current/continuous. |
| |
UNE-EN 62586-2:2014 | A measure of the quality of supply in power supply systems. Part 2: Functional tests and uncertainty requirements. |
| |
UNE-EN 62626-1:2014 |
|
| |
UNE-EN 62841-2-2:2014 | Portable, semi-fixed tools and gardening and lawnmower machines, powered by electric motor. Security. Part 2-2: Particular requirements for screwdrivers and portable impact keys |
| |
UNE-EN 62841-2-4:2014 | Portable, semi-fixed tools and gardening machinery and lawnmowers, powered by electric motor. Security. Part 2-4: Particular requirements for portable and portable lijators other than disk drives. |
| |
UNE-EN 62841-2-5:2014 |
Portable, semi-fixed tools and gardening machinery and lawnmowers, powered by electric motor. Security. Part 2-5: Particular requirements for portable circular saws. |
| |
UNE-EN 62841-3-6:2014 | Portable, semi-fixed tools and gardening machinery and lawnmowers, powered by electric motor. Security. Part 3-6: Particular requirements for semi-fixed diamond drills with liquid system |
| |
UNE-EN 62929:2014 | Cleaning Robots for Home Use. Dry Cleaning: Fitness measurement methods for the function. |
| |
UNE-EN ISO 105-B01:2014 | Textiles. Colour strength tests. Part B01: Solidity of color to light: Light of the day. (ISO 105-B01:2014) | UNE-EN ISO 105-B01:2000 | |
UNE-EN ISO 105-B02:2014 | Textiles. Colour strength tests. Part B02: Solidity of colour to artificial light: Essay with xenon lamp. (ISO 105-B02:2014). | UNE-EN ISO 105-B02:2013 | |
UNE-EN ISO 2440:2001/A2:2014 | Materials Flexible and rigid cellular polymer. Accelerated ageing testing. Modification 2. (ISO 2440 :1997/AMD 2:2014). |
| |
UNE-EN ISO 2588:2014 | Leather. Sampling. The number of items in the global sample. (ISO 2588:2014). | UNE 59022:1982 | |
UNE-EN ISO 3218:2014 | Essential oils. Principles of nomenclature. (ISO 3218:2014). |
| |
UNE-EN ISO 3233-2:2014 | Paintings and varnishes. Determination of the percentage by volume of non-volatile matter. Part 2: Method by determining the content of the non-volatile matter according to ISO 3251 and the density of the dry film according to the Archimedes principle in painted specimens. |
| |
UNE-EN ISO 3385:2014 | Flexible cellular polymeric materials. Determination of fatigue by indentation at constant load. (ISO 3385:2014). | UNE-EN ISO 3385:1996 | |
UNE-EN ISO 3994:2014 | Plastic-based Mangueras. Hoses of thermoplastic materials with helical thermoplastic reinforcement for suction and discharge of aqueous materials. Specifications. (ISO 3994:2014). | UNE-EN ISO 3994:2012 | |
UNE-EN ISO 4210-2:2014 | Cycles. Safety requirements for bicycles. Part 2: Requirements for ride bikes, for young adults, mountain and racing. (ISO 4210-2:2014). |
| |
UNE-EN ISO 4210-3:2014 | Cycles. Safety requirements for bicycles. Part 3: Common test methods. (ISO 4210-3:2014). |
| |
UNE-EN ISO 4210-4:2014 | Cycles. Safety requirements for bicycles. Part 4: Test methods for braking. (ISO 4210-4:2014, Corrected Version 2014-11-01). |
| |
UNE-EN ISO 4210-5:2014 | Cycles. Safety requirements for bicycles. Part 5: Test methods of the address. (ISO 4210-5:2014). |
| |
UNE-EN ISO 5163:2014 | Oil products. Determination of the anti-detonating characteristics of fuels for automotive and aviation. Engine Method (ISO 5163:2014) | UNE-EN ISO 5163:2006 UNE-EN ISO 5163 :2006/AC: 2009 | |
UNE-EN ISO 5164:2014 | Oil products. Determination of the anti-detonating characteristics of fuels. Method of investigation. (ISO 5164:2014). | UNE-EN ISO 5164:2006 | |
UNE-EN ISO 5555:2002/A1:2014 | Oils and fats animal and plant origin. Sampling. Modification 1: Flexible tanks. (ISO 5555 :2001/Amd 1:2014). |
| |
UNE-EN ISO 8330:2014 |
| UNE-EN ISO 8330:2008 | |
UNE-EN ISO 8871-2:2005/A1:2014 | Elements Elastomeric products for parenteral administration products and for pharmaceutical products. Part 2: Identification and characterization. Amendment 1. (ISO 8871-2:2003/Amd 1:2005). |
| |
UNE-EN ISO 9308-1:2014 | Water quality. Count of Escherichia coli and coliform bacteria. Part 1: Membrane filtration method for water with low microbiota content. (ISO 9308-1:2014). | UNE-EN ISO 9308-1:2001 UNE-EN ISO 9308-1:2001/AC: 2008 | |
UNE-EN ISO 10113:2014 |
Metal Materials. Sheets and bands. Determination of the plastic anisotropy coefficient. (ISO 10113:2006, corrected version 2007-08-01). | UNE 36404:1988 EX UNE 36404:2004 EX ERRATUM | |
UNE-EN ISO 10275:2014 | Metal Materials. Sheets and bands. Determination of the coefficient of acrimony to traction. (ISO 10275:2007). | UNE 36405:1988 EX | |
UNE-EN ISO 11200:2014 | Acoustics. Noise emitted by machines and equipment. Guidelines for the use of the basic standards for the determination of emission sound pressure levels in the workplace and in other specified positions. (ISO 11200:2014). | UNE-EN ISO 11200:2010 | |
UNE-EN ISO 11499:2014 | Dentistry. Single-use cartridges for local anesthetics. (ISO 11499:2014). | UNE-EN ISO 11499:2008 | |
UNE-EN ISO 11607-1:2009/A1:2014 | Packaging for terminally sterilised sanitary products. Part 1: Requirements for materials, sterile barrier systems and packaging systems. (ISO 11607-1:2006/Amd 1:2014) |
| |
UNE-EN ISO 11607-2:2007/A1:2014 | Packaging for Products Sterilized health care facilities. Part 2: Requirements for conformation, sealing and assembly processes. (ISO 11607-2:2006/Amd 1:2014). |
| |
UNE-EN ISO 11979-9:2007/A1:2014 | ophthalmic implants. Intraocular lenses. Part 9: Multifocal intraocular Lents. (ISO 11979-9:2006/Amd 1:2014). |
| |
UNE-EN ISO 11979-10:2007/A1:2014 | ophthalmic implants. Intraocular lenses. Part 10: Faquic intraocular Lents. (ISO 11979-10:2006/Amd 1:2014). |
| |
UNE-EN ISO 12010:2014 | Water quality. Determination of short chain polychlorinated alkanes (SCCP) in water. Method by gas chromatography-mass spectrometry (GC-MS) with negative chemical ionization (NCI). (ISO 12010:2012). |
| |
UNE-EN ISO 12228-1:2014 | Oils and fats of animal and plant origin. Determination of the content of individual and total sterols by gas chromatography. Part 1: Oils and fats of animal and plant origin. (ISO 12228-1:2014). |
| |
UNE-EN ISO 12870:2014 | ophthalmic Optical. Eyewear mounts. General requirements and test methods. (ISO 12870:2012). | UNE-EN ISO 12870:2012 | |
UNE-EN ISO 12999-1:2014 | Acoustics. Determination and application of measurement uncertainties in building acoustics. Part 1: Acoustic insulation. (ISO 12999-1:2014). | UNE-EN 20140-2:1994 | |
UNE-EN ISO 13137:2014 | Atmosphere in the place of work. Pumps for the personal sampling of chemical and biological agents. Requirements and test methods. (ISO 13137:2013). | UNE-EN 1232:1997 UNE-EN 12919:2000 | |
UNE-EN ISO 13212:2014 | ophthalmic Optics. Products for the maintenance of contact lenses. Guidelines for the determination of useful life. (ISO 13212:2014). | UNE-EN ISO 13212:2011 | |
UNE-EN ISO 13935-1:2014 | Textiles. Tensile strength properties of woven fabrics and textile articles. Part 1: Determination of the maximum strength of the seams by the strip method (ISO 13935-1:2014) | UNE-EN ISO 13935-1:1999 | |
ISO 13935-2:2014 | Textiles. Tensile strength properties of woven fabrics and textile articles. Part 2: Determination of the maximum strength of the seams by the grip method (Grab method) (ISO 13935-2:2014) | UNE-EN ISO 13935-2:1999 | |
ISO 14114:2014 | ISO 14114:2014 | Gas welding equipment. Regulating plants for the distribution of acetylene for welding, cutting and related processes. General requirements (ISO 14114:2014). | UNE-EN ISO 14114:1999 |
UNE-EN ISO 14246:2014 | Bottles gas. Valves for gas cylinders. Manufacturing tests and inspections (ISO 14246:2014) | UNE-EN ISO 14246:2002 | |
UNE-EN ISO 14730:2014 | ophthalmic Optics. Products for the maintenance of contact lenses. Anti-microbial conservation efficacy trials and recommendations for the determination of the intended validity period after the package is opened. (ISO 14730:2014). | UNE-EN ISO 14730:2001 | |
UNE-EN ISO 15112:2014 | Natural gas. Determination of energy. (ISO 15112:2011). |
| |
UNE-EN ISO 15181-6:2014 | Paintings and varnishes. Determination of the lixiviation rate of biocidal products contained in anti-fouling paints. Part 6: Determination of the rate of tralopiryl leaching by quantifying its degradation product in the extract. (ISO 15181-6:2012). |
| |
UNE-EN ISO 15883-1:2009/A1:2014 | Disinfecting Washers. Part 1: General requirements, definitions and tests. (ISO 15883-1:2006/Amd 1: 2014). |
| |
UNE-EN ISO 16297:2014 | Milk. Count of bacteria. Protocol for the assessment of alternative methods. (ISO 16297:2013). |
| |
UNE-EN ISO 17249:2014 | Cutting-resistant security Chain saw. (ISO 17249:2013). |
| |
UNE-EN ISO 17463:2014 | Paintings and varnishes. Guidelines for the determination of the anticorrosive properties of organic coatings by means of accelerated cyclic electrochemical technique. (ISO 17463:2014). | UNE 48315 -1:2011 | |
UNE-EN ISO 17516:2014 | Cosmetics. Microbiology. Microbiological limits. (ISO 17516:2014). |
| |
UNE-EN ISO 18082:2014 | Respiratory and anesthesia equipment. Dimensions of the non-interchangeable threaded connectors (NIST) at low pressure for medicinal gases. (ISO 18082:2014). | UNE-EN 15908:2011 | |
UNE-EN ISO 19115 -1:2014 | Geographic information. Metadata. Part 1: Fundamentals. (ISO 19115 -1:2014). | UNE-EN ISO 19115:2006 UNE-EN ISO 19115 :2006/AC: 2009 | |
UNE-EN ISO 20346:2014 |
Personal protection equipment. Protective footwear. (ISO 20346:2014) | UNE-EN ISO 20346:2005 UNE-EN ISO 20346 :2005/AC: 2007 UNE-EN ISO 20346:2005/A1:2008 | |
UNE-EN ISO 22282-6:2014 | Geotechnical research and testing. Hydrogeological tests. Part 6: Probe permeability tests using closed systems. (ISO 22282-6:2012). |
| |
UNE-EN ISO 22476-5:2014 | Geotechnical research and testing. Field trials. Part 5: Test with flexible dilatometer. (ISO 22476-5:2012). |
| |
UNE-EN ISO 23553-1:2014 | Security and Control Devices for Burners and appliances using liquid fuel. Special requirements. Part 1: Automatic and semi-automatic valves. (ISO 23553-1:2014). | UNE-EN ISO 23553-1:2010 | |
UNE-EN ISO/IEC 17067:2014 | Evaluation of the conformity. Product certification fundamentals and guidelines for product certification schemes. (ISO/IEC 17067:2013). | UNE 66567:2005 IN | |
UNE-HD 60364-5-52:2014 | Power installations low voltage. Part 5: Selection and installation of electrical equipment. Canalizations. | UNE 20460-5-52:1996 UNE 20460-5-52/1M: 1999 UNE 20460-5-523:2004 | |
UNE-HD 60364-7-710:2014 | Low voltage power installations. Part 7-710: Requirements for special installations or sites. Local medical use. |
| |
UNE-HD 60364-7-717:2013/AC: 2014 | Power Facilities low voltage. Part 7-717: Rules for facilities and special sites. Mobile or portable units. |
| |
UNE-IEC/TR 60344:2014 IN | Guide to calculating The resistance of copper conductors naked or coated on wires and wires for low frequency. | UNE 20623:2003 | |
-ISO 2493-2:2014 | Paper and cardboard. Determination of the flexural strength. Part 2: Taber type instrument. | UNE 57075:1995 | |
-ISO 2577:2014 | Plastics. Thermostable molding compounds. Determination of contraction. | UNE 53019-1:2005 | |
-ISO 2846-1:2014 | Graphic technology. Color and transparency of ink sets for four-color printing. Part 1: Litographic offset offset in sheet and heat-set coil (heat drying). | UNE 54105-1:2001 | |
-ISO 3664:2014 |
Graphic technology and photography. Observation Conditions. | UNE 54001:1973 UNE 54001:1996 ERRATUM UNE 54002:1973 UNE 54002:1996 ERRATUM UNE 54003:1973 UNE 54003:1996 ERRATUM | |
-ISO 45575:2014 | Plastics. Poly (vinyl chloride) pastes. Determination of the apparent viscosity by the Severs reometer. | UNE 53461:1990 | |
-ISO 4582:2014 | Plastics. Determination of changes in coloration, superficial appearance in general, and variations of properties after exposure to natural light under glass, natural aging, or laboratory light sources. | UNE 53384:2002 | |
-ISO 4901:2014 | reinforced plastics based on unsaturated polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography. | UNE 53304-5:1996 | |
UNE-ISO/IEC TS 17021-3:2014 | Assessment of compliance. Requirements for the bodies carrying out the audit and certification of management systems. Part 3: Competition requirements for auditing and certification of quality management systems. |
| |
UNE-ISO/IEC TS 17023:2014 | Assessment of compliance. Guidelines for determining the duration of management system certification audits. |
|