Resolution Of 10 April 2015, Of The Directorate General Of Industry And Small And Medium-Sized Enterprises, Which Publishes The Relationship Of Standards Links Approved By The Spanish Association For Standardisation And Certification During The Month O...
Original Language Title: Resolución de 10 de abril de 2015, de la Dirección General de Industria y de la Pequeña y Mediana Empresa, por la que se publica la relación de normas UNE aprobadas por la Asociación Española de Normalización y Certificación durante el mes de ...
Read the untranslated law here: http://www.boe.es/buscar/doc.php?id=BOE-A-2015-4724
(In compliance of it willing in the article 11, f), of the regulation of the infrastructure for the quality and security Industrial, approved by Real Decree 2200 / 1995, of 28 of December («Bulletin official of the State», no. 32, of 6 of February of 1996) and seen the record of them standards approved by the Association Spanish of standardization and certification, entity designated by order of the Ministry of industry and energy of 26 of February of 1986 , in accordance with the Royal Decree 1614 / 1985, of 1 August, and recognized by the first additional provision of the aforementioned Royal Decree 2200 / 1995 of 28 December, this General direction has resolved to publish in the «Official Gazette», the relationship of Spanish standards UNE approved by the Spanish Association for standardisation and certification, for the month of March 2015 , identified by its title and code number, that figure as annex to the present resolution.
This resolution will cause the effect from the day following its publication in the "Official Gazette".
Madrid, 10 of April of 2015.-the Director General of industry and of the small and medium enterprise, Victor Audera Lopez.
ANNEX rules published in the month of March 2015 code title replaced a UNE 23121:2015.
Installation and maintenance of fire-retardant blankets aircraft.
Fibres for concrete. (AR) alkali-resistant glass fibers. Definitions, classification and specifications.
Heating of the building. Criteria for the qualification of the quality of the heating systems. Part 1-1: criteria of rating of the quality of the documentation technical.
Heating of the building. Criteria for the qualification of the quality of the heating systems. Part 1-2: Calculation method for rating the quality of the technical documentation.
Heating of the building. Criteria for the qualification of the quality of the heating systems. Part 2-1: The quality of the installation qualification criteria.
Heating of the building. Criteria for the rating of the quality of the facilities thermal. Part 2-2: Guide to the rating of the quality of the Assembly.
Safety rules for the construction and installation of lifts. Lifts for the transport of people and cargo. Part 20: Elevators for persons and persons and cargo.
Safety rules for the construction and installation of lifts. Inspections and tests. Part 50: Design rules, calculations, inspections and testing of components of lift.
For professional use cooking appliances using gaseous fuels. Part 2-1: Particular requirements. Discovered burners and wok burners type.
Heat exchangers. Air-cooled condensers for refrigeration forced convection. Test procedures to determine performance.
UNE-EN 328:2000 UNE-EN 328/A1:2003.
Additives for concrete, mortar and pasta. Methods of test. Part 1: concrete and mortar of reference for trials.
UNE-IN 480-1:2007 + A1: 2011.
Products chemicals used in the treatment of the water destined to the consumption human. Hypochlorite de calcium.
Chemicals used for treatment of water intended for human consumption. High dolomite.
UNE-EN 1017:2008 UNE-EN 1017:2008 / AC:2010.
Furniture. Assessment of the ignitability of upholstered furniture. Part 1: Ignition source: cigarette burning.
Furniture. Assessment of the ignitability of upholstered furniture. Part 2: Ignition source: equivalent to a match flame.
UNE-IN 1092-1:2008 + A1: 2015.
Flanges and their joints. Flanges circular for pipes, fittings, accessories and parts special, designation PN. Part 1: flanges for steel.
Chemicals used for treatment of water intended for human consumption. Bis-dihydrogen phosphate zinc solution.
Equipment of the playing fields. Volleyball teams. Functional and safety, test methods requirements.
UNE-EN 1271:2004 UNE-EN 1271:2004 / AC:2006.
Food processing machinery. Basic concepts. Part 1: requirements for safety.
Accessories prefabricated for covers. Skylights individual in materials plastics. Specifications of product and methods of test.
Eurocode 3. Project of structures of steel. Part 1-11: Cables and straps.
Stainless steels. Part 1: List of stainless steels.
Stainless steels. Part 2: Technical delivery conditions for sheet and strip of steel resistant to corrosion for general purposes.
Stainless steels. Part 3: conditions technical of supply for products semi-finished, bars, wire rods, wire, profiles and products calibrated of steels resistant to the corrosion to uses General.
Gas infrastructure. Stations of gas transport and distribution pressure regulation. Performance requirements.
UNE-EN 12186:2001 UNE-EN 12186:2001 / A1:2005.
Ground for aircraft equipment. Specific requirements. Part 2: Catering vehicles.
EN 12312-2:2002 + A1:2009.
Ground for aircraft equipment. Specific requirements. Part 4: Passenger boarding bridges.
EN 12312-4:2003 + A1:2009.
Ground for aircraft equipment. Specific requirements. Part 14: vehicles from boarding to passengers with mobility reduced.
AT 12312-14:2006 + A1: 2009.
Copper and alloys of copper. Parts forged.
Products chemicals used in the treatment of the water destined to the consumption human. CAL.
UNE-IN 12518:2008 UNE-IN 12518:2008 ERRATUM: 2010.
Bitumens and binders bituminous. Determination of solubility.
Bitumen and bituminous binders. Preparation of test samples.
Bitumen and bituminous binders. Determination of the kinematic viscosity.
Bitumen and bituminous binders. Determination of the resistance to the effect of the heat and air hardening. Part 1: RTFOT (rotational and fine film) method.
The tyre pressure measuring instruments. Pressure control devices or tyre of motor vehicles. Metrology, requirements and testing.
UNE-EN 12663-1:2011 + A1:2015.
Railway applications. Structural requirements of railway vehicles boxes. Part 1: Locomotives and rolling stock of travelers (and alternative method for freight wagons).
Cranes. General design requirements. Part 3-3: States limit and wheel/rail contact aptitude test.
Food products. Trace element determination. Digestion under pressure.
Products food. Determination of vitamin B2 by high performance liquid chromatography.
UNE-IN 14152:2004 UNE-IN 14152:2004 / AC: 2007.
Equipment and accessories for LPG. Inspection and testing of tankers for liquefied petroleum (LPG) gas.
Tanks intended to the transportation of goods dangerous. Team for the tanks destined to the transport of products chemical liquids and of gases liquefied. Pressurization of the cistern and product discharge valves.
Tanks intended to the transportation of goods dangerous. Equipment for tanks intended for the transport of liquid chemicals. Valves of Fund.
The influence of the materials organic on the water destined to the consumption human. Determination of the chlorine demand. Test method.
Pipes, fittings and accessories of ductile cast iron. Coating Epoxy (high resistance) for fittings and accessories of ductile cast iron. Requirements and test methods.
Chemicals used for treatment of pool water. Ozone.
Chemicals used for treatment of water of swimming pools. Sodium carbonate.
Chemicals used for treatment of water of swimming pools. Chlorine.
Chemicals used for treatment of water of swimming pools. Hydrochloric acid.
UNE-EN 16146:2013 + A1:2015.
Sanitary fittings. Flexible for devices of output removable for fitting health for systems of feeding of water of type 1 and of type 2. Specifications technical General.
UNE-IN 16309 + A1: 2015.
Sustainability in the building. Evaluation of the behavior social of those buildings. Methods of calculation.
Acoustic. Code of essay for ceilings suspended. Absorption acoustic.
Quality of the water. Requirements nomenclatural for the registration of the data of biodiversity, lists of verification and key taxonomic.
Machines for compacting waste or fractions recyclable. Vertical baling presses. Safety requirements.
Quality of the water. Guide for the evaluation of the hydromorphological characteristics of coastal waters and transitional waters.
Bottles for the transport of gas. Bottles small transportable in steel, not rechargeable, of ability to lower or equal to 120 ml that contain gases compressed or liquefied (bottles Compact). Design, manufacture, filling and testing.
Containers and packaging. Containers of plastic rigid. Finished PET 26 / 22 (12.0).
UNE-IN 50342-2:2008 / A1: 2015.
Lead Starter batteries batteries. Part 2: Dimensions of batteries and marking of terminals.
Electrical cables. Guide to the use of cables of rated voltage not greater than 450/750 V (U0/U). Part 1: General guidelines.
Electrical cables. Guide to the use of cables of rated voltage not greater than 450/750 V (U0/U). Part 2: Specific guidance on the types of standard IN 50525 cables.
Power, control and communication cables. Wire for general applications in buildings subject to reaction to fire requirements.
Electric cables for photovoltaic systems.
Specification for methods and apparatus of measurement of radio disturbance and immunity to radio interference. Part 1-2: Apparatus for measurement of radio disturbance and immunity to radio interference. Devices for coupling measurement of conducted disturbances.
Specification for the methods and devices of measure of them disturbances radio and of the immunity to them disturbances radio. Part 2-1: methods of measurement of the perturbations radio and of the immunity to them disturbances radio. Measures of the disturbances led.
UNE-IN 60335-2-76:2006 / A2: 2015.
Appliances home appliances and similar. Security. Part 2-76: requirements specific to electrificadores of fences.
Appliances home appliances and similar. Code of test for the determination of the noise acoustic air. Part 2-1: Particular requirements for vacuum cleaners of powder.
Fiber optic. Part 1-50: Measurement methods and test procedures. Trials of damp heat (steady-state).
Compatibility electromagnetic (EMF). Part 4-5: Testing and measurement techniques. Immunity to shock waves tests.
Compatibility electromagnetic (EMF). Part 4-19: Testing and measurement techniques. Test of immunity to disturbances conducted in differential mode and signs in the frequency range of 2 kHz to 150 kHz in AC power access.
EN 61029-2-5:2012 / A11:2015.
Shifting power tools machinery safety. Part 2-5: Particular requirements for band saws.
UNE-EN 61195:2001 / A2:2015.
Double-ended fluorescent lamps. Safety requirements.
UNE-EN 61199:2012 / A2:2015.
Only Cap fluorescent lamps. Safety requirements.
Devices of protection against the radiation X of diagnostic medical. Part 1: determination of the properties of attenuation of the materials.
Devices of protection against the radiation X of diagnostic medical. Part 2: plates translucent of protection.
Devices of protection against the radiation X of diagnostic medical. Part 3: clothing, goggles and shields for protection of the patient.
Lamp control devices. Part 2-13: Particular requirements for electronic control devices powered with direct current or alternating current for LED modules.
Wind turbines. Part 2: Small wind turbines.
Insulating liquids. Determination of acidity. Part 3: Methods of test for non-mineral insulating oils.
Measurement of the level of intermodulation of devices microwave and radio frequency passive. Part 1: requirements General and methods of measurement.
Measurement of the level of intermodulation of devices microwave and radio frequency passive. Part 2: measurement of the intermodulation passive in sets of cables coaxial.
Measurement of the level of intermodulation of devices microwave and radio frequency passive. Part 3: Measurement of passive intermodulation in coaxial connectors.
Measurement of intermodulation of microwave devices and passive RF level. Part 4: Measurement of passive intermodulation in coaxial cables.
Measurement of intermodulation of microwave devices and passive RF level. Part 5: measurement of the intermodulation passive in filters.
Measurement of intermodulation of microwave devices and passive RF level. Part 6: measurement of the intermodulation passive in antennas.
Lighting general. Diodes (LED) unit and related equipment products. Terms and definitions.
UNE - EN ISO 306:2015.
Plastics. Material thermoplastics. Determination of the temperature of softening Vicat (VST). (ISO 306:2013).
UNE - EN ISO 306:2005.
UNE - EN ISO 898-1:2015.
Mechanical properties of carbon steel and alloy steel fasteners. Part 1: bolts, screws and bolts with kinds of quality specified. Thread thickness step and thread of paso fino. (ISO 898-1:2013).
UNE - EN ISO 898-1:2010 UNE-EN ISO 898-1:2010 ERRATUM:2011.
UNE - EN ISO 4064-3:2015.
Counters of water for water cold drinking and water hot. Part 3: Test report format. (ISO 4064-3:2014).
UNE - EN ISO 4064-4:2015.
Water cold water and hot water meters. Part 4: Requirements not metrological not covered by the standard ISO 6064-1. (ISO 4064-4:2014).
UNE - EN ISO 4126-6:2015.
Safety devices for protection against excessive pressure. Part 6: Application, selection and installation of safety with rupture disc devices. (ISO 4126-6:2014).
UNE - EN ISO 4126-6:2004.
UNE - EN ISO 4618:2015.
Paints and varnishes. Terms and definitions. (ISO 4618:2014).
UNE - EN ISO 4618:2007.
UNE-IN ISO 6808:2015.
Hoses of plastics and their joint with accessories of union for suction and download to low pressure of liquid oil. Specifications. (ISO 6808:2014).
UNE-IN ISO 6808:2001.
UNE-IN ISO 9455-5:2015.
Fluxes for soldering soft. Test methods. Part 5: test of mirror of copper. (ISO 9455-5:2014).
UNE - EN ISO 10239:2015.
Small boats. Liquefied petroleum gas (LPG) systems. (ISO 10239:2014).
UNE - EN ISO 10664:2015.
Hollow internal hexalobular bolts and screws. (ISO 10664:2014).
UNE - EN ISO 10664:2006.
UNE - EN ISO 11092:2015.
Textiles. Physiological effects. Measurement of the resistance thermal and of the resistance to the steam of water in conditions stationary (trial of the plate hot protected of the perspiration). (ISO 11092:2014).
UNE-IN 31092:1996 UNE-IN 31092:1996 / A1: 2013.
UNE-IN ISO 11979-8:2015.
Ophthalmic implants. Intraocular lenses. Part 8: Fundamental requirements. (ISO 11979-8:2006 and ISO 11979-8:2006 / Amd 1:2011).
UNE-IN ISO 11979-8:2009 UNE-IN ISO 11979-8:2009 / A1: 2011.
UNE-IN ISO 12571:2015.
Performance higrotérmicas of the products and materials for construction. Determination of the properties of sorption hygroscopic. (ISO 12571:2013).
UNE-IN ISO 12571:2000.
UNE-IN ISO 12966-1:2015.
Oils and fats of animal and vegetable origin. Fatty acid methyl esters gas chromatography. Part 1: Guidelines on modern gas chromatography of the methyl esters of fatty acids. (ISO 12966-1:2014).
UNE - EN ISO 13297:2015.
Pleasure craft. Electrical systems. Alternating current installations. (ISO 13297:2014).
UNE - EN ISO 13297:2013.
UNE - EN ISO 13803:2015.
Paints and varnishes. Determination of specular veil over 20 painting films. (ISO 13803:2014).
UNE - EN ISO 13803:2005.
UNE - EN ISO 14534:2015.
Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements. (ISO 14534:2011).
UNE - EN ISO 14534:2011.
UNE - EN ISO 15614-12:2015.
Specification and qualification of welding process for metallic materials procedures. Trial of the procedure of welding. Part 12: welding by points, by stitching and by bumps. (ISO 15614-12:2014).
UNE-IN ISO 15614-12:2005.
UNE-IN ISO 16000-32:2015.
Air of interiors. Part 32: investigation of the presence of contaminants in the buildings. (ISO 16000-32:2014).
UNE - EN ISO 16251-1:2015.
Acoustic. Measurement in laboratory of reducing the transmission of impact by flooring on a floor of small dimensions. Part 1: Heavy soils. (ISO 16251-1:2014).
UNE - EN ISO 16283-1:2015.
Acoustic. Measurement on-site of sound insulation in buildings and of building elements. Part 1: Airborne noise insulation. (ISO 16283-1:2014).
UNE - EN ISO 16283-1:2014.
UNE-IN ISO 16373-2:2015.
Textiles. Dyes. Part 2: General method for the determination of extractables, including the allergens and carcinogenic dyes (method using piridina-agua). (ISO 16373-2:2014).
UNE-IN ISO 16373-3:2015.
Textiles. Dyes. Part 3: Method for the determination of certain dyes carcinogenic removable (method with trimethylamine/methanol). (ISO 16373-3:2014).
UNE-IN ISO 17855-1:2015.
Plastics. Materials of polyethylene (PE) for injection molding and extrusion. Part 1: System of designation and basis for specifications. (ISO 17855-1:2014).
UNE - EN ISO 1872-1:2001.
UNE - EN ISO 18542-2:2015.
Vehicles from road. Terminology standard for the repair and the maintenance information (RMI). Part 2: Requirements for the implementation of standardized processes, registration authority. (ISO 18542-2:2014).
UNE-IN ISO 19065-1:2015.
Plastics. Materials of acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(polietileno clorado)-styrene (ACS) for injection molding and extrusion. Part 1: System of designation and bases for the specifications. (ISO 19065-1:2013).
UNE-IN ISO 6402-1:2003.
UNE-IN ISO 19066-1:2015.
Plastics. Materials of methacrylate of methyl-acrylonitrile-butadiene-styrene (MABS) for injection molding and extrusion. Part 1: System of designation and bases for the specifications. (ISO 19066-1:2014).
UNE - EN ISO 10366-1:2003.
UNE - EN ISO 22476-7:2015.
Research and geotechnical testing. Field trials. Part 7: Test with rigid dilatometer. (ISO 22476-7:2012).
Environmental management. Water footprint. Principles, guidelines and requirements.
Search Translated Laws of Spain