Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette" number 32, 6 February 1996), and having regard to the file of the rules approved by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985, of 1 August, and recognized by the additional provision of the said Royal Decree 2200/1995, of December 28.
This Directorate-General has decided to publish in the "Official State Gazette" the relationship of Spanish standards UNE, approved by the Spanish Association for Standardisation and Certification, corresponding to the month of June 2015, identified by its title and numerical code, which is listed as an annex to this resolution.
This resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, July 13, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Rules edited in June 2015
Title | ||
---|---|---|
UNE 27701:2015 | Electronic aids in man-to-water emergency situations. |
|
UNE 50001:2015 | CDU. Universal Decimal Classification. | uNE 50001:2000 UNE 50001:2002 ERRATUM UNE 50001 /1M: 2004 |
UNE 53199:2015 | Plastics. Flexible cellular polymeric materials. Determination of solvent swelling. | UNE 53199:1993 |
53521:2015 | Elastomers. Determination of the plasticity of the rubbers and their unvulcanized mixtures. | UNE 53521:2004 |
53565-1:2015 | Elastomeres. Determination of the adhesion of the rubber to the metal or other rigid substrates. Part 1: Method of a board. | UNE 53565-1:1997 |
53565-2:2015 | Elastomers. Determination of the adhesion of the rubber to the metal or other rigid substrates. Part 2: Two-plate method. | UNE 53565-2:1997 |
53565-3:2015 | Elastomers. Determination of the adhesion of the rubber to the metal or other rigid substrates. Part 3: Conical parts method. | UNE 53565-3:1997 |
53565-4:2015 | Elastomers. Determination of the adhesion of the rubber to the metal or other rigid substrates. Part 4: Four-plate method. | UNE 53565-4:2010 |
53967:2015 IN | Plastics. Flexible polyurethane foams (PUR). Tolerances on the nominal value of the characteristics of the block-made ether-type PUR foams. | UNE 53967:2003 IN |
53973:2015 | Elastomers. Raw materials for the rubber industry. Regenerated rubbers. Test methods. | UNE 53973:1996 |
une 62422:2014/1m: 2015 | Double tank construction wall by in situ transformation of steel tanks. |
|
83989:2015 | Durability of the concrete. Test methods. Determination of the water-soluble chlorides of the concrete. |
|
127917:2015 | Pozos of The invention also features a mass concrete, reinforced concrete and concrete inspection chambers and chambers with steel fiber. National complement to the UNE-EN 1917 Standard. | UNE 127917:2005 |
188004:2015 | Services tourism in sports nautical facilities. | UNE 188004:2009 |
192001-11:2015 | Inspection procedure in establishments affected by the regulation of major accidents in which Dangerous substances are involved. Part 11: Regular security inspection. |
|
192001-12:2015 | Procedure inspection in establishments affected by the regulation of major accidents involving dangerous substances. Part 12: Monitoring the emergency drill. |
|
192001-13:2015 | Procedure inspection in establishments affected by the regulation of major accidents involving dangerous substances. Part 13: Monitoring Industrial Safety Regulatory Compliance. |
|
UNE-CEN ISO/TR 6579-3:2015 IN | Microbiology of the food chain. Horizontal method for the detection, enumeration and serotyping of Salmonella. Part 3: Guidelines for the serotyping of Salmonella spp. (ISO/TR 6579-3:2014). |
|
UNE-CEN/TR 13205-3:2015 IN | Workplace exposure. Assessment of the operation of the sampler for the measurement of concentrations of suspended particulate matter in the air. Part 3: Analysis of the sampling efficiency data. | UNE-EN 13205:2002 |
UNE-CEN/TS 16010:2015 EX | Plastics. Recycled plastics. Sampling procedures for plastic and recycled waste testing. |
|
UNE-EN 71-14:2015 | Toy Security. Part 14: Trampolines for domestic use. |
|
UNE-EN 454:2015 | Machinery for the processed food. Planetary blitters. Safety and hygiene requirements. | UNE-EN 454:2001 + A1:2010 |
UNE-EN 455-2:2015 | Gloves doctors for single use. Part 2: Requirements and trials for determining physical properties. | UNE-EN 455-2:2010 + A2:2013 |
UNE-EN 455-3:2015 |
Medical gloves for single use. Part 3: Requirements and trials for biological assessment. | UNE-EN 455-3:2007 |
UNE-EN 694:2015 | Fire-fighting Mangueras. Semi-irrigated hoses for fixed systems. | UNE-EN 694:2001 + A1:2008 |
UNE-EN 764-4:2015 | Pressure Equipment. Part 4: Establishing technical conditions of supply for metal materials. | UNE-EN 764-4:2003 |
UNE-EN 764-5:2015 | Pressure equipment. Part 5: Metal material inspection documents and compliance with the material specification. | UNE-EN 764-5:2003 |
UNE-EN 834 :2014/AC: 2015 | Heating cost repartiers to determine the consumption values of local radiators. Electrical energy powered appliances. |
|
UNE-EN 1097-10:2015 | Tests for determine the mechanical and physical properties of the aggregates. Part 10: Determining the water suction height. | UNE-EN 1097-10:2004 |
UNE-EN 1367-7:2015 | Tests to determine the thermal and alteration properties of the aggregates. Part 7: Determination of resistance to ice cycles and thawing of light aggregates. |
|
UNE-EN 1367-8:2015 |
Tests to determine the thermal and alteration properties of the aggregates. Part 8: Determination of the resistance to the disintegration of light aggregates. |
|
UNE-EN 1371-2:2015 | Foundry. Inspection by penetrating liquids. Part 2: Foundry to lost wax. | UNE-EN 1371-2:1999 |
UNE-EN 1501-1:2012 + A1:2015 | Vehicles for the collection of waste. General requirements and safety requirements. Part 1: Vehicles for the collection of post-load waste. | UNE-EN 1501-1:2012 |
UNE-EN 1790:2015 | Materials for horizontal road signaling. Prefabricated vials |
|
UNE-EN 1870-17:2013 + A1:2015 | Machine Security to work the wood. Circular saws. Part 17: Horizontal horizontal cutting with a saw unit (manual radial saw). | UNE-EN 1870-17:2013 |
UNE-EN 12547:2015 | Centrifugators. Common security requirements. | UNE-EN 12547:2000 + A1:2009 |
UNE-EN 12674-4:2015 | Containers rodantes. Part 4: Functional requirements. | UNE-EN 12674-4:2007 |
UNE-EN 12966:2015 | Senalization vertical on the road. Variable message panels. |
|
UNE-EN 13138-2:2015 | learning of swimming. Part 2: Safety requirements and test methods for flotation aids intended for attachment. | UNE-EN 13138-2:2008 |
UNE-EN 13138-3:2015 | Flotation aids for swimming learning. Part 3: Safety requirements and test methods for seat floaters used by children. | UNE-EN 13138-3:2008 |
UNE-EN 13141-6:2015 | Building Ventilation. Testing of the performance of components/equipment for ventilation in dwellings. Part 6: Compact ventilation systems for individual housing extraction. | UNE-EN 13141-6:2004 |
UNE-EN 13175:2015 |
Equipment and accessories for LPG. Specifications and tests of valves and accessories for pressure vessels for liquefied petroleum gases (LPG). | UNE-EN 13175:2003 + A2:2007 |
UNE-EN 13205-2:2015 | Workplace Exposition. Assessment of the operation of the sampler for the measurement of concentrations of suspended particulate matter in the air. Part 2: Laboratory operating test based on the determination of sampling effectiveness. | UNE-EN 13205:2002 |
UNE-EN 13205-4:2015 | Workplace exposure. Assessment of the operation of the sampler for the measurement of concentrations of suspended particulate matter in the air. Part 4: Laboratory performance test based on the comparison of concentrations. | UNE-EN 13205:2002 |
UNE-EN 13205-5:2015 | Exposition in the workplace. Assessment of the operation of the sampler for the measurement of concentrations of suspended particulate matter in the air. Part 5: Operating test of aerosol samplers and sample comparison performed at the workplace. | UNE-EN 13205:2002 |
UNE-EN 13205-6:2015 | Workplace Exposition. Assessment of the operation of the sampler for the measurement of concentrations of suspended particulate matter in the air. Part 6: Transport and handling tests. | UNE-EN 13205:2002 |
UNE-EN 13445-1:2015/A1:2015 | Part 1: Generalities. |
|
UNE-EN 13445-8:2015/A1:2015 | Non-Pressure Receipts -called. Part 8: Additional requirements for aluminum pressure vessels and aluminum alloys. |
|
UNE-EN 13553:2015 |
Resilient floor coverings. Vinyl chloride floor coverings for use in special wet areas. Specifications. | UNE-EN 13553:2002 |
UNE-EN 14140:2015 | Equipment and accessories for LPG. Portable and refillable welded steel bottles for LPG. Alternative design and construction. | UNE-EN 14140:2004 + A1:2008 UNE-EN 14140:2004 + A1:2008 ERRATUM: 2011 |
UNE-EN 14468-1:2015 | Table Tennis. Part 1: Tables for table tennis, functional and safety requirements, test methods. | UNE-EN 14468-1:2005 |
UNE-EN 15059:2009 + A1:2015 | Equipment for stepping on snow. Security requirements. | UNE-EN 15059:2009 |
UNE-EN 15063-1:2015 | Copper and copper alloys. Determination of the main constituents and impurities by X-ray fluorescence emission spectrometry (FRX). Part 1: Guidelines for the routine method. | UNE-EN 15063-1:2008 |
UNE-EN 15269-10:2015 |
|
|
UNE-EN 15307:2015 |
| UNE-EN 15307:2007 |
UNE-EN 15768:2015 | Influence of the materials on water intended for human consumption. Identification of lixiviable organic substances in water by CG-EM. |
|
UNE-EN 16136:2015 | Automotive Fuels. Determination of the content of iron and manganese in unleaded gasolines. Method by optical emission spectroscopy using inductive coupling plasma (ICP OES). | UNE-EN 16136:2012 |
UNE-EN 16185-1:2015 | Railway applications. Braking systems for self-propelled units. Part 1: Requirements and definitions. |
|
UNE-EN 16185-2:2015 | Railway applications. Braking systems for self-propelled units. Part 2: Test methods. |
|
UNE-EN 16276:2015 | Lighting of the escape routes in road tunnels. |
|
UNE-EN 16372:2015 | Aesthetic surgery services. |
|
UNE-EN 16397-1:2015 | Flexible Racers. Part 1: Operating requirements. |
|
UNE-EN 16397-2:2015 | Flexible Racers. Part 2: Features and trials of racers, adapters, and flexible connections coated with a metal band. |
|
UNE-EN 16421:2015 | Influence of materials on water intended for human consumption. Stimulating microbial growth (ECM) |
|
UNE-EN 16644:2015 | Bombs. Rotodynamic pumps. Non-pressed circulators of a rated power not exceeding 200 W for heating and hot water domestic sanitary installations. Noise test code (vibro-acoustic) to measure structural and hydraulic noise. | UNE-EN 1151-2:2007 |
UNE-EN 16646:2015 |
Maintenance. Maintenance on managing physical assets. |
|
UNE-EN 50121-1:2015 | Applications railway. Electromagnetic compatibility. Part 1: Generalities. |
|
UNE-EN 50121-3-2:2015 | Railway applications. Electromagnetic compatibility. Part 3-2: Rolling Stock. Appliances. |
|
UNE-EN 50121-5:2015 | Railway Applications. Electromagnetic compatibility. Part 5: Emission and immunity of fixed power supply facilities and associated equipment. |
|
Characteristics of the voltage supplied by the general distribution networks. |
| |
UNE-EN 50216-4:2015 | Accessories for power transformers and reactances. Part 4: Basic accessories (grounding terminals, filling and emptying devices, thermometer covers, wheels). |
|
UNE-EN 50250:2003/A1:2015 | Conversion adapters for industrial uses. |
|
UNE-EN 50299-1:2015 | Oil-submerged cable connection sets for Transformers and reactances with higher voltage for the material Um from 72.5 kV to 550 kV. Part 1: Fluid-filled cable terminals. |
|
UNE-EN 50299-2:2015 | Sets of Cable connection submerged in oil for transformers and reactances with higher voltage for the material Um from 72,5 kV to 550 kV. Part 2: Dry-type cable terminals. |
|
UNE-EN 50393:2015 | Methods and Requirements Test for voltage distribution cable accessories assigned 0 ,6/1, 0 (1, 2) kV. |
|
UNE-EN 50598-1:2015 | Ecodesign for power electric drives, engine starters, power electronics and their applications. Part 1: General requirements for establishing energy efficiency standards for power electric drives using the extended product approach (EPA) and the semi-analytical model (SAM). |
|
RAEE collection, logistics, and treatment requirements. Part 2-1: Treatment requirements for lamps. |
| |
UNE-EN 55016-1-1:2011/A2:2015 |
|
|
UNE-EN 60317-40:2015 | Specifications for particular types of Yarns for electromagnetic coils. Part 40: Naked copper thread or rectangular section enamelled, covered with a fiberglass braid, impregnated with resin or varnish, temperature index 200. |
|
UNE-EN 60335-2-103:2015 | Appliances and analogues. Security. Part 2-103: Particular requirements for gate, door and window actuators. |
|
UNE-EN 60598-2-20:2015 | Luminaries. Part 2-20: Particular requirements. Bright garlands. |
|
UNE-EN 60598-2-21:2015 | Luminaries. Part 2-21: Special requirements. Luminous cords. |
|
UNE-EN 60601-1:2008/A12:2015 | Electromedical Equipment. Part 1: General requirements for basic security and essential functioning. | EN 60601-1:2006/A12:2014 |
UNE-EN 60645-1:2015 |
Electroacoustics. Audiometric equipment. Part 1: Equipment for pure-tone audiometry. |
|
UNE-EN 60705:2015 | Horns microwave for domestic use. Fitness measurement methods for the function. | UNE-EN 60705:2013 UNE-EN 60705:2013/A1:2015 |
UNE-EN 60730-2-5:2015 | Automatic electrical control devices for domestic and analogue use. Part 2-5: Particular requirements for the automatic electric control systems of the burners. |
|
UNE-EN 60794-1-24:2015 | Fibre optic cables. Part 1-24: Generic specification. Test procedures for basic optical cables. Electrical test methods. |
|
UNE-EN 61243-3:2015 | Tension Jobs. Voltage detectors. Part 3: Bipolar type for low voltage. |
|
UNE-EN 61481-1:2015 | Tension jobs. Phase comparators. Part 1: capacitive type detectors for use with voltages greater than 1 kV in alternating current. |
|
UNE-EN 61481-2:2015 | Tension jobs. Phase comparators. Part 2: resistive type detectors for use with voltages between 1 kV and 36 kV on alternating current. |
|
UNE-EN 62019:2001/A12:2015 | Small electrical device. Automatic switches and similar apparatus for domestic uses. Auxiliary contact blocks. |
|
UNE-EN 62110 :2013/AC: 2015 | Electric Fields and magnetic power systems generated by AC power systems. Measurement procedures of the exposure levels of the general public. |
|
UNE-EN 62271-202:2015/AC: 2015 | High-voltage device. Part 202: High voltage/low voltage prefabricated transformation centers. |
|
UNE-EN 80601-2-35:2010/AC: 2015 |
Electromedical equipment. Part 2-35: Particular requirements for basic safety and essential operating characteristics of the blankets, pads and heat-generating mattresses for medical use. |
|
UNE-EN ISO 899-1:2003/A1:2015 | Plastics. Determination of the behavior in fluence. Part 1: Fluency in traction. Amendment 1. (ISO 899-1 :2003/Amd 1:2015). |
|
UNE-EN ISO 899-2:2003/A1:2015 | Plastics. Determination of the behavior in fluence. Part 2: Flows in bending by the load method in three points. Amendment 1. (ISO 899-2:2003/Amd 1:2015). |
|
UNE-EN ISO 2538-1:2015 | Geometric Specification products (GPS). Wedges. Part 1: Series of angles and inclinations. (ISO 2538-1:2014). | EN ISO 2538-1:2014 |
UNE-EN ISO 2538-2:2015 | Geometric Specification products (GPS). Wedges. Part 2: Acitations and tolerances. (ISO 2538-2:2014). | EN ISO 2538-2:2014 |
UNE-EN ISO 2692:2015 | Geometric specification products (GPS). Geometric tolerances. Maximum material requirement (MMR), minimum material requirement (MRL) and reciprocity requirement (RPR). (ISO 2692:2014). | EN ISO 2692:2014 |
UNE-EN ISO 3040:2015 | Geometric Specification products (GPS). Acceptance and tolerance. Cones. (ISO 3040:2009). | EN ISO 3040:2012 |
UNE-EN ISO 6149-4:2015 | Connections for transmissions hydraulic and general applications. Male orifices and ends with ISO 261 metric threads and O-seal. Part 4: Dimensions, design, test methods and requirements of the male connection ends with six inner and outer faces. (ISO 6149-4:2006). |
|
UNE-EN ISO 7439:2015 | Contractive intrauterine devices that contain copper. Requirements and tests. (ISO 7439:2015). | UNE-EN ISO 7439:2011 |
UNE-EN ISO 10579:2015 | Geometric Specification products (GPS). Cotas and tolerances. Non-rigid parts. (ISO 10579:2010, including Cor 1:201). | EN ISO 10579:2013 |
UNE-EN ISO 11120:2015 | Bottles gas. Non-solderable steel tubes with a water capacity of between 150 l and 3 000 l. Design, manufacture and test. (ISO 11120:2015). | UNE-EN ISO 11120:1999 UNE-EN ISO 11120:1999/A1:2013 |
UNE-EN ISO 12818:2015 |
Glass packs. Standard tolerances for flasks. (ISO 12818:2013). | UNE-EN 15904:2011 |
UNE-EN ISO 12821:2015 | Glass packs. Mouth corona 26 H 180. Dimensions. (ISO 12821:2013). | UNE-EN 14634:2011 |
UNE-EN ISO 14253-1:2015 | Geometric Specification products (GPS). Inspection by measuring parts and measuring equipment. Part 1: Decision rules for testing compliance or non-compliance with specifications. (ISO 14253-1:2013). | EN ISO 14253-1:2013 |
UNE-EN ISO 14405-2:2015 | Geometric Specification of products (GPS). Dimensional tolerance. Part 2: Dimensions different from the linear dimensions. (ISO 14405-2:2011). | EN ISO 14405-2:2011 |
UNE-EN ISO 14919:2015 | Thermal Projection. Wires, rods and cords for projection by torch and arc. Classification. Technical conditions of supply. (ISO 14919:2015). | UNE-EN ISO 14919:2002 |
UNE-EN ISO 14920:2015 | Thermal Projection. Projection and melting of the coatings obtained by thermal projection of self-flux alloys. (ISO 14920:2015). | UNE-EN ISO 14920:1999 |
UNE-EN ISO 16000-19:2015 | Indoor air. Part 19: Sampling strategy for moulds. (ISO 16000-19:2012). |
|
UNE-EN ISO 16995:2015 | Solid biofuels. Determination of the water soluble content of chloride, sodium and potassium. (ISO 16995:2015). | UNE-EN 15105:2011 |
UNE-EN ISO 23125:2015 | Machine-tools. Security. Tornos. (ISO 23125:2015). | UNE-EN ISO 23125:2011 UNE-EN ISO 23125:2011/A1:2012 |
UNE-EN ISO 25760:2015 |
Gas bottles. Procedures for the safe removal of gas cylinder valves. (ISO 25760:2009). |
|
-ISO 1926:2015 | rigid cellular plastics. Determining traction properties. | UNE 53190:2001 |
-ISO 9141-3:2015 | Vehicles road. Diagnosis systems. Part 3: Verifying the communication between the vehicle and the OBD II analysis tool. |
|
-ISO 14230-1:2015 |
Road vehicles. Diagnosis communication on the K line (DoK-Line). Part 1: Physical Layer. | UNE-ISO 14230-1:2006 |
-ISO 21101:2015 | Active tourism. Security management system. Requirements. | UNE 188003:2009 |
-ISO 21103:2015 | Tourism active. Information for participants. | UNE 188003:2009 |
UNE-ISO/TR 21102:2015 IN | Active tourism. Leaders. Staff competence. | UNE 188003:2009 |