The Organic Law of 19 June, of Qualifications and Vocational Training, aims at the organisation of an integral system of vocational training, qualifications and accreditation, which will respond effectively and transparency of social and economic demands through the various forms of training. To this end, it creates the National System of Qualifications and Vocational Training, defining it in Article 2.1 as the set of instruments and actions necessary to promote and develop the integration of vocational training offerings, through the National Catalogue of Professional Qualifications, as well as the evaluation and accreditation of the corresponding professional skills, in order to promote the professional and social development of the people and cover the needs of the production system.

The National Catalogue of Professional Qualifications, as set out in Article 7.1, is designed to facilitate the integrated nature and adequacy of vocational training and the labour market, as well as training throughout life, the mobility of workers and the unity of the labour market. This catalogue consists of the qualifications identified in the production system and the training associated with them, which is organised in training modules.

Article 5.3 of the Organic Law of 19 June, gives the National Qualifications Institute the responsibility to define, develop and maintain the National Catalogue of Professional Qualifications, in its quality of technical organ of support to the General Council of Vocational Training, whose regulatory development is set out in Article 9.2 of Royal Decree 1128/2003 of 5 September, which regulates the National Catalogue of Qualifications Professionals, in accordance with Article 9.4, the obligation to maintain permanently updated by its periodic review which, in any case, shall be carried out within a period of not more than five years from the date of inclusion of the qualification in the catalogue.

Therefore, this order is issued in application of Royal Decree 817/2014 of 26 September 2014 laying down specific aspects of professional qualifications for the purposes of which it is amended, Article 7.3 of the Organic Law of 19 June 2002 on qualifications and vocational training, which was obtained by the Council of State of the Council of State 618/2014 of 23 July 2014, is applicable to the approval and effects of the legislation.

Thus, in this order, two professional qualifications of the Professional Family Safety and Environment, which have an age in the National Catalogue of the Family, are updated, as a complete replacement of their annexes. Professional qualifications exceeding five years, to which Royal Decree 817/2014 applies, of 26 September. In addition, certain professional qualifications are partially modified by the replacement of certain cross-cutting competence units and their associated training modules, including up-to-date professional qualifications. listed in the attachments of this order.

In the process of drafting this order, the Autonomous Communities have been consulted and the General Council of Vocational Training and the State School Council have issued a report.

Under the joint proposal of the Minister for Education, Culture and Sport and the Minister for Employment and Social Security, I have:

Article 1. Object and scope of application.

This ministerial order aims to update two professional qualifications corresponding to the Professional Family Safety and Environment, with the corresponding annexes being replaced, and amended. (a) in the case of certain professional qualifications by the replacement of certain competitive units and associated training modules, in application of Royal Decree 817/2014 of 26 September 2014 laying down Point (a) of Article 4 (1) of Directive the procedure for approval and effects is applicable to Article 7.3 of the Organic Law of 19 June 2002 on qualifications and vocational training.

Updated and partially modified professional qualifications are valid and are applicable throughout the national territory, and do not constitute a regulation of professional practice.

Article 2. Updating of certain professional qualifications of the Family Safety and Environment, established by Royal Decree 295/2004 of 20 February, establishing certain professional qualifications included in the National Catalogue of Professional Qualifications, as well as their corresponding training modules which are incorporated into the Modular Catalogue of Vocational Training.

As set out in the single additional provision of Royal Decree 295/2004 of 20 February 2004, the updating of professional qualifications, the specifications of which are contained in Annexes XXVIII and XXX of the aforementioned royal decree:

One. A new wording is given to Annex XXVIII, Professional Qualification "Services for pest control". Level 2. SEA028_2, which is listed as Annex I to this order.

Two. A new wording is given to Annex XXX, Professional Qualification "Control and protection of the natural environment". Level 3. SEA030_3, which is listed as Annex II to this order.

Article 3. Partial modification of certain professional qualifications established by Royal Decree 295/2004 of 20 February establishing certain professional qualifications which are included in the National Catalogue of Qualifications Professionals, as well as their corresponding training modules which are incorporated into the Modular Catalogue of Vocational Training.

As set out in the single additional provision of Royal Decree 295/2004 of 20 February 2004, the updating of professional qualifications, the specifications of which are contained in Annexes XXVI and XXVII of the aforementioned royal decree:

One. The professional qualification established as "Annex XXVI: Operation of Water Treatment Stations" is amended. Level2. SEA026_2. "replacing, respectively, the unit of competence" UC0075_2: Adopt the measures of prevention of occupational risks in the workplace "and the associated training module" MF0075_2: Safety and health. (70 h) "for the unit of competence" UC0075_2: Adopt the measures for the prevention of occupational risks at the workplace "and the associated training module" MF0075_2: Safety and health. (60 h) ", corresponding to Annex I" Services for the control of pests. Level 2. SEA028_2. " of this order, also modifying the total duration of the training associated with the qualification from 540 hours to 530 hours.

Two. The professional qualification established as "Annex XXVII: Management of Urban and Industrial Waste" is amended. Level 2. SEA027_2. 'replacing the unit of competence' UC0075_2: Adopt the measures for the prevention of occupational risks at the workplace 'and the associated training module' MF0075_2: Safety and health. (70 h) ' by the competition unit "UC0075_2: Adopt the measures for the prevention of occupational risks in the workplace" and the associated training module "MF0075_2: Safety and Health. (60 h)", corresponding to Annex I " Services for pest control. Level 2. SEA028_2. " of this order, also modifying the total duration of the training associated with the qualification from 520 hours to 510 hours.

Final disposition first. Competence title.

This order is dictated by the powers conferred on the State by Article 149.1.1. and the 30th of the Constitution, on the regulation of the basic conditions that guarantee the equality of all Spaniards in the exercise of rights and in the fulfilment of constitutional duties, and for the regulation of the conditions for obtaining, issuing and approval of academic and professional qualifications.

Final disposition second. Entry into force.

This order shall enter into force on the day following that of its publication in the "Official State Gazette".

Madrid, July 23, 2015. -Government Vice President and Minister of the Presidency Soraya Saenz de Santamaria Anton.

ANNEX I

Professional Qualification: Services for pest control

Professional Family: Safety and Environment

Level: 2

Code: SEA028_2

General Competition

Prepare the means and products for the control of harmful organisms, their transport and application, adopting measures to prevent occupational risks and environmental protection.

Competition Units

UC0078_2: Prepare and transport media and products for pest control

UC0079_2: Apply media and products for pest control

UC0075_2: Adopt job risk prevention measures in the job

Professional Environment

Professional Scope

Develops its professional activity in the service of environmental health, in the field of the activities of control of harmful organisms, in the areas of application, preparation and transport of media and products. The professional activity is carried out both autonomously and contracted, in the public sphere, either the General Administration of the State, the regional or local authorities, and in the private sphere, with private clients and in large, medium, small, and micro-enterprises, depending functionally on a superior. Their professional activity is subject to regulation by the competent authority. The principles of universal accessibility are applied in the development of professional activity in accordance with the applicable regulations.

Productive Sectors

It is located in the productive sector of environmental health, in the subsector related to pest control.

Relevant occupations and jobs

The terms of the following relationship of occupations and jobs are used with a generic and omnicomprensivo character of women and men.

Biocidal applicators

Pest Control Applicators

Pesticide fuels

Buildings-Disinsecure Buildings

Associated Training (360 hours)

Training Modules

MF0078_2: Preparing biocidal products and phytosanitary (120 hours)

MF0079_2: Application of media and products for pest control (180 hours)

MF0075_2: Security and Health (60 hours)

COMPETITION UNIT 1: PREPARE AND TRANSPORT MEDIA AND PRODUCTS FOR PEST CONTROL

Level: 2

Code: UC0078_2

Professional Realizations and Realization Criteria:

RP 1: Prepare the utensils, equipment, and pest control products/harmful organisms for shipment, following the action plan and complying with applicable regulations.

CR 1.1 Personal and environmental protection work materials, equipment, and clothing are selected based on the task and packaged for shipment, in accordance with the security procedure.

CR 1.2 The compliance with the conditions for the preservation of the products and packaging of pest control/harmful organisms is verified, prior to their use and transfer, according to applicable regulations.

CR 1.3 The pest control instruments/harmful organisms are selected according to the procedure established by the company.

CR 1.4 The conservation status and the operation of the instrument are verified, prior to their transfer, following the action plan.

RP 2: Carry out loading and unloading of the utensils, equipment and products in the means of transport for shipment, confirming the safety record and complying with the applicable regulations.

CR 2.1 The integrity of the pest control containers is verified, ensuring transport in safety conditions.

CR 2.2 The integrity of the labels of the pest control containers is verified, ensuring transport in safety conditions.

CR 2.3 Biocidal equipment, instruments and products are loaded and anchored in the means of transport, according to technical specifications and safety measures.

CR 2.4 The safety sheet for the products transported is controlled by compliance with the applicable rules for each of them.

CR 2.5 The materials and products, in order to respond to the contingencies of spills and accidents, are established in the means of transport, according to the procedure of action.

CR 2.6 Download operations are performed in safety conditions for people and the environment, avoiding risks.

CR 2.7 Individual protective equipment is used as set out in product safety sheets and work procedures, preventing damage to health.

RP 3: Carry out and take care of the itinerary, utensils, equipment and products of pest control/harmful organisms, ensuring the integrity of the devices and complying with the applicable regulations.

CR 3.1 The completion of the required documentation in the transport of chemicals/biocides is confirmed, as applicable regulations for its requirement by the competent authority.

CR 3.2 The transport of chemicals/biocides is valid, taking into account the agreement of the means and the conditions of transport of chemicals/biocides with the utensils, according to the instructions of the technical officer and the applicable rules.

CR 3.3 The instructions for using the spill containment means are collected, prior to the shipment, for their query to break the container or escape the product.

CR 3.4 The integrity of the merchandise during the shipment is verified by the conservation measures set out in the applicable regulations.

Professional Context:

Production media:

Pressure sprays, dusting machines, nebulizers, thermonebullizers, aerosol machines, baits, traps, brushes, brushes, garrafs, boats, fixed or mobile equipment, dosing equipment, syringes, among others. Scales, specimens, jugs. Emulsifiers. Personal protective equipment and the environment (signalling and beacon material). Chemicals (cleaning products, anti-corrosive products, neutralising products, among others) and biocidal products. Basic first aid equipment. Mobile communication system.

Products and results:

Pest utensils, equipment, and pest control products. Loading and unloading of utensils, equipment and products in the means of transport. Transfer and custody of the equipment, equipment and products of pest control, carried out.

Information used or generated:

Technical report/action plan (diagnosis of the situation, action programme and evaluation) of the superiors. Safety data sheets for chemicals/biocides. Manual handling of equipment and products. Management manuals for personal protective equipment. Input and output records for instruments, equipment, and products. Protocols against contingencies and accidents

Applicable regulations on transportation of chemicals.

COMPETITION UNIT 2: APPLY MEDIA AND PRODUCTS FOR PEST CONTROL

Level: 2

Code: UC0079_2

Professional Realizations and Realization Criteria:

RP 1: 'on site' prepare instruments and biocidal products, used in pest control/harmful organisms, to comply with the applicable rules.

CR 1.1 The type of pest or infestation, its distribution, extension, factors that cause and favor proliferation and control means, are verified according to the technical report of the situation diagnosis, complying with the regulations applicable.

CR 1.2 The inspection and sampling of the area or element, for the application of biocidal products, is carried out by means of the tools and auxiliary means established.

CR 1.3 Biocidal products, used in the control of pests/harmful organisms, are validated as set out in the control plan.

CR 1.4 The deviations from the action programme are collected, according to the established protocol, by informing the technical officer.

CR 1.5 The inclusion of passive safety measures for pest control in the action programme is confirmed in accordance with applicable rules.

CR 1.6 The personal and environment security means are confirmed, according to the internal rules of work and applicable regulations.

RP 2: Carry out the operations of application of chemical, biological, physical or physical-chemical means for the control of pests/organisms harmful according to the diagnosis of situation, program of performance and evaluation, complying with the applicable rules.

CR 2.1 Measures, personal safety equipment and the environment for the application of chemical, biological, physical or physical-chemical products are established, according to the safety procedure.

CR 2.2 The dose of the product and the sequence of actions for treatment with biocidal products are set out in the application protocol, according to applicable regulations.

CR 2.3 The application of biocides is carried out at the time of greatest vulnerability of the target species and of less impact, according to the procedures established by the technical officer, activity and use of the facilities.

CR 2.4 Residual products, single-use personal protective means, and individual protective consumables, are discarded, according to applicable procedures and regulations.

CR 2.5 Temporary prohibition protocols for the transit of persons and animals are established and marked according to the safety deadline in the registration of the product.

CR 2.6 The documentary record of application of chemical, biological, physical or physical-chemical means for the control of pests/harmful organisms is elaborated, by means of the report of the analysis of the situation, service and certificate of service.

RP 3: Carry out the cleaning and operational maintenance operations of the biocidal product application equipment, used in the control of pests/harmful organisms, according to the standard and use of each instrument, in order to comply with the applicable rules.

CR 3.1 Empty containers and biocides waste are deposited in the container, according to their nature.

CR 3.2 Biocides application equipment is cleaned, following instruction manuals, being ready for the next use.

CR 3.3 Maintenance of biocidal product application equipment is performed as indicated in the maintenance manuals.

CR 3.4 Equipment is stored, as per protocol set.

Professional Context:

Production media:

Pressure sprays, dusting machines, nebulizers, thermonebulliers, aerosol machines, baits, traps, brushes, brushes, application syringes, autoclaves and treatment rafts, fixed or mobile equipment Treatment, dosing equipment, CIP systems, Measurement devices. Personal protective equipment and the environment (signalling and beacon material). Chemicals (cleaning products, anti-corrosive products, neutralising products, etc.) and biocidal products. Basic first aid equipment. Mobile communication system.

Products and results:

In situ preparations are the instruments and biocidal products used in the control of pests/harmful organisms '. Applied the chemical, biological, physical or physical-chemical means for the control of pests/organisms. Operations for the cleaning and operational maintenance of equipment for the application of biocidal products.

Information used or generated:

Technical report/action plan (diagnosis of the situation, action programme and evaluation) of the superiors. Manual handling of equipment and products. Management manuals for personal protective equipment. Manual on how to remove generated hazardous waste. Labels and data sheets for the safety of chemicals/biocides. Manual and procedure for dealing with contingencies and emergencies. Applicable regulations of Good practice in the plans of disinfection, disinterment and de-ratization. Records of the operations performed. Records of risks, incidents and breakdowns. Signage. Situation analysis report, performance programs, and service certificate.

COMPETITION UNIT 3: ADOPT WORKPLACE RISK PREVENTION MEASURES

Level: 2

Code: UC0075_2

Professional Realizations and Realization Criteria:

RP 1: Rate the risks associated with the environmental activity and conditions of the facilities, derived from the procedures, equipment, substances and energies, according to applicable regulations to adopt the preventive measures.

CR 1.1 The risks arising from work equipment are valued, in accordance with applicable safety standards, by adopting preventive measures.

CR 1.2 The risks associated with the waste obtained from the activity are valued, according to the work order, complying with the applicable regulations, proceeding to the implementation of preventive measures.

CR 1.3 The risks arising from the use of substances and energy in the treatment of waste are valued, complying with the applicable regulations for the implementation of preventive measures.

CR 1.4 The risks arising from the environmental conditions of the workplace are assessed in compliance with the applicable regulations for the implementation of preventive measures.

CR 1.5 The risks arising from facilities in workplaces are valued, complying with the applicable regulations for the implementation of preventive measures.

RP 2: Apply preventive and protective measures, using individual and collective protective equipment, communicating the incidents, to avoid the risks associated with the workplace complying with the regulations applicable.

CR 2.1 The operability of the individual protective equipment is checked, to be used, depending on the risk to be prevented.

CR 2.2 Collective protection equipment, emergency plan and facility evacuation, used in the development of works, are reviewed according to established protocol.

CR 2.3 Emergency exits and means to be used in case of emergency are identified according to applicable regulations.

CR 2.4 The signaling, safety labeling, and health related to your work are identified, taking into account the pictogram of the packages.

CR 2.5 The location of the alarm signals is verified, depending on the type of signal and according to applicable regulations, being visible to act in an emergency.

CR 2.6 The location of fire fighting equipment is checked, as set out in the applicable regulations, to be used in an emergency.

CR 2.7 The communication of incidents in the application of preventive and protective measures is carried out according to the applicable regulations.

RP 3: Apply first aid techniques, following performance protocols, to avoid complications.

CR 3.1 First aid kit is reviewed, according to established protocol, identifying drugs and cure material.

CR 3.2 The poisonings produced by dangerous products are verified according to the identification symptoms of the poisoning, acting on the dangerous product that generates it.

CR 3.3 First aid action protocols in case of escapes, spills or discharges of dangerous products are carried out in order to avoid the contact of dangerous products with persons and to prevent their discharge into the environment. environment.

CR 3.4 The means of information, communication and transport of first aid, are used according to the emergency, following protocols of action.

CR 3.5 First aid applies to an emergency, according to acting protocols.

Professional Context:

Production media:

Personal protection equipment. Basic first aid equipment. Signalling and beacon material. Mobile communication system. Emergency plan. Evacuation plan. Collective protection equipment.

Products and results:

Risks associated with the activity and environmental conditions of the facilities, valued. Preventive and protective measures are applied. First aid applied, according to emergency.

Information used or generated:

Risk information provided by the job center. Labels and safety sheets for dangerous products. Preventive instructions, action protocols and work procedures. Work equipment manuals. Parts of risk communication, incidents and breakdowns. Security tokens.

TRAINING MODULE 1: PREPARATION OF BIOCIDAL PRODUCTS AND PLANT PROTECTION

Level: 2

Code: MF0078_2

Associated with UC: Preparing and transporting media and products for pest control

Duration: 120 hours

Assessment capabilities and criteria:

C1: Differentiate the products and media used in the control of pests/harmful organisms, taking into account the characteristics that define them.

CE1.1 Explain the concepts of pest/harmful organisms, biocidal products and plant protection products, taking into account the characteristics of the differences.

CE1.2 Distinguished product types according to their characteristics.

CE1.3 Differentiate disinfection and sterilization methods and techniques, taking into account the characteristics that define them.

CE1.4 In a practical scenario of pest control/harmful organisms, differentiate the products and means used, from a given condition:

-Develop a scheme of systems for pest control/harmful organisms, according to physical, chemical and biological means, used.

-To analyze the characteristics of the chemical biocides with special attention to the composition, presentation, performance mechanisms and risks associated with their handling.

-Identify the registration, labeling and packaging of chemicals used in pest control, as applicable.

C2: Organize the warehouse of the means and products used in the control of pests/harmful organisms, taking into account the applicable regulations of personal and environmental safety.

EC2.1 Explain applicable regulations in the warehouse of chemicals used in pest control/harmful organisms.

CE2.2 Interpret the hazard pictograms based on the indications shown on the label.

CE2.3 In a practical scenario of organizing the warehouse of the media and products used in pest control/harmful organisms, from certain chemicals given:

-Apply personal and environmental security measures to be maintained in the chemical warehouse, complying with applicable regulations.

-To store chemical products on the basis of criteria of toxicity, use and composition, according to the guidelines established by responsible technicians.

-Validate action and measures to be taken against product spills in warehouses, according to personal and environmental safety regulations.

C3: Prepare biocidal products and products, according to the established plan of action.

CE3.1 Verify, prior to product loading, the operation of the instruments, following the instruction manual.

CE3.2 Name the components of the biocidal products, provided in the technical documentation of the product.

CE3.3 Describe the formulation of the types of biocides, used in pest control/harmful organisms.

CE3.4 Synthesis the risks associated with the preparation of biocides and the response to contingencies, taking into account safety and environmental standards.

CE3.5 Perform the registration and packaging of biocidal products, according to applicable regulations.

CE3.6 In a practical scenario of preparation of biocidal products, on the basis of given conditions:

-Select the tools, equipment and products for pest control/harmful organisms, taking into account what is established in the action plan.

-Interpret the information contained in the labels of biocidal products.

-Verify the closure of product packaging, disposing of those that do not comply with applicable regulations

-Identify the criteria of choice of the means of application according to the type of pest, local in which it is applied, main activity of the local, formulation of the biocidal product.

-Propose the preparation of chemical products, according to their commercial presentation and application system.

-Prepare biocidal products for safety and environmental standards.

C4: Operate in the transport of the means and products used in the control of pests/harmful organisms, taking into account the technical specifications of handling of utensils, equipment and products, and the applicable safety regulations personal and environmental.

CE4.1 Identify applicable regulations for the transport of chemicals (biocides), according to traffic regulations.

CE4.2 Integrate the documentation required for the transportation of equipment, instruments and products, according to applicable regulations.

CE4.3 Classify used means of transport and conditions for the shipment of chemicals, taking into account applicable personal and environmental safety regulations.

CE4.4 Describe security conditions based on specific characteristics for the transportation of utensils, equipment, and products.

CE4.5 In a practical assumption of loading and unloading of utensils, equipment and products, in the means of transport, on the basis of given conditions:

-Interpret the hazard pictograms based on the indications shown on the label.

-Carry out loading and unloading utensils, equipment and products, according to established protocol, minimizing accidents and/or incidents.

-Carry out the loading and unloading of equipment, instruments and products under safety conditions, taking into account the distribution and anchorage of the equipment in the enclosure of the means of transport.

-Interpret the security data tab that accompanies each of the products used.

-Use individual protection equipment assigned to load and unload operations of equipment, instruments, and products.

CE4.6 In a practical transport of utensils, equipment and products, from a given condition:

-Classify the transport for the shipment of the chemicals and the forms of loading and anchorage in the vehicle, taking into account the safety conditions.

-Propose product placement forms during transport, according to applicable regulations.

-Check the anchor failures-integrity of the containers produced in the shipment of the utensils, equipment, and products.

Capabilities whose acquisition must be completed in a real workbench:

C1 with respect to CE1.4; C2 with respect to CE2.3; C3 with respect to CE3.6; C4 with respect to CE4.5 and CE4.6.

Other capabilities:

Take responsibility for the work you are developing, completing the tasks within the set deadlines.

Prove a good professional.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Interpret and execute work instructions.

Respect internal organization procedures and rules.

Contents:

1. General pest control concepts

Concept of plague, vector and disseminator.

Pesticide names: rodenticides, insecticides, fungicides, herbicides, avicides, among others.

The circle of risk and human health. Concepts of toxicity, dangerousness and persistence.

International chemical substance safety programme, international code of conduct and responsible CARE: Authorisation of biocidal products and plant protection products in Spain.

Requirements for manufacturers and importers, packaging conditions, labelling rules.

2. Means and products used in pest control

Physical/physical-chemical media.

Chemicals: Insecticides. Disinfectants and rodenticides.

Last-generation products.

Hormones and pheromones: Chitin inhibitors.

Biological pest control. Other systems.

3. Forms of preparation, conditioning and system of application and instruments of products used as biocides

Components: Active matter, adjuvants, inert substances.

Solid formulations: Wettable, soluble and dusted polvos, spreadable granules, dispersible microgranules, baits and fumigates.

Liquid Formulations: Soluble, emulsifiable and self-suspending liquids. Microencapsulated. Aerosols.

disinfection and sterilization media and techniques: Major infection-causing agents, infectious processes that constitute pests.

Disinfection: physical and chemical methods.

Sterilization: physical and chemical methods.

Techniques for the application of chemical methods: immersion, lotion, spraying, vaporization, fumigation and aerosols.

Aparatage: Dose and use calibration, maintenance.

4. Transport of media and products

Regulations applicable to the transport of media and products.

Documentation.

Transport media: features. Location of the products in the vehicle.

Conditions, transport security measures.

5. Chemicals storage facilities and premises

General applicable regulations: Environment hygiene, windows and doors.

Extinguishers, fire systems.

Internal distribution of storage and administration zones. Product separation. Applicable personal and environmental security measures: response to contingencies.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

1.-Domain of knowledge and techniques related to the preparation and transport of means and products for pest control, which shall be accredited by one of the following two forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 2: APPLICATION OF MEDIA AND PRODUCTS FOR PEST CONTROL

Level: 2

Code: MF0079_2

Associated with UC: Apply media and products for pest control

Duration: 180 hours

Assessment capabilities and criteria:

C1: Verify the characterization of the pests/harmful organisms, specifying the conditions of the site and the application environment of the control systems.

CE1.1 Identify the types of pests/organisms harmful to the urban and natural environment (rodents, arthropods, birds, bacteria, viruses, fungi, among others), taking into account their basic dynamics and evolution.

CE1.2 Describe the zone or element to be treated, specifying the place and/or environment conditions.

CE1.3 Distinguished passive safety measures in pest control/harmful organisms (passive deratization, passive disinsation, among others.) according to the type of pest.

CE1.4 Classify environment security measures based on physical, physical, chemical, chemical, or biological risks.

CE1.5 In a practical scenario of characterization of the behavior of the pest/harmful organisms, based on the particular conditions where it is located:

-Identify pest-causing organisms, valuing quantitative and qualitative signs.

-Place the treatment-susceptible zone or element in a plane.

-To distinguish the damage caused by the pest/harmful organisms, in the health of people and animals.

-To distinguish the damage caused by the pest/harmful organisms, in the environment.

C2: Identify the work procedures, equipment and products used in the control of pests/harmful organisms, taking into account the established action plan and prevention of occupational hazards.

EC2.1 List hygienic, environmental and structural measures for pest control/harmful organisms as set out in the action plan.

CE2.2 Explain the operation of the technical means used in the application of biocidal products.

CE2.3 Classify the application forms of biocidal products, according to the product and means used in pest control/harmful organisms.

CE2.4 Define the risks arising from the handling of biocidal products.

CE2.5 Classify biocides by taking into account the pest/harmful organisms or disease to be controlled, chemical nature, ways of acting and effects, among others.

CE2.6 In a practical scenario for identifying the procedure for action in the control of pest/harmful organisms, on the basis of given conditions:

-Identify the formulation, application, identification, inter alia, of the biocidal products, as applicable.

-Calculate the concentration/dose of the products to be applied, taking into account the specifications of the labels.

-Identify the deviations set in the action plan, with respect to the situation diagnosis.

C3: Apply the means and products used in the control of pests/harmful organisms, as established by the technical officer and in hygienic and sanitary conditions, safety and prevention of occupational risks.

CE3.1 List work procedures in pest control/harmful organisms, following established work protocols.

CE3.2 Identify the elements of the delimitation of the danger zones (tapes, barandas, luminous signals and sealing of installations, among others), according to the area, place or environment of application of the products used in the control of plagi/harmful organisms.

CE3.3 Describe the measures of application of the biocides, depending on the type of product to be applied.

CE3.4 Differentiate the phases in the integrated control of pest/harmful organisms, taking into account the characteristics of the pest.

CE3.5 Citar individual protective equipment, depending on the type of treatment to be applied.

CE3.6 In a practical scenario of application of products and means used in pest control/harmful organisms, based on the documentation provided by the responsible technician:

-Point out the species to be combated and the instruments and control equipment established for the species.

-Identify the type of installation, using the documentation provided by the responsible technician.

-Place areas or elements that are susceptible to treatment on a plane.

-Develop the application measures set out in the Take Action program.

-Apply the localized brush stroke technique and/or sprinkle, as indicated in the responsible technician report.

-Apply the technique of spraying, nebulization, aerosols, fumigation and installation of baits and traps, in the environmental control of the pest, as established by the technical officer.

-Carry out the application of products on the basis of occupational and environmental risk prevention.

C4: Apply cleaning and maintenance techniques for biocidal application equipment used in pest control/harmful organisms, following the manual of team instructions and prevention of occupational hazards.

CE4.1 Citar waste produced in pest control operations/harmful organisms according to the working phases.

CE4.2 Select empty containers, according to the typology of the containers and the products they contained.

CE4.3 Remove empty containers, according to their hazard characteristics and through authorized waste managers.

CE4.4 Select the residues of biocidal products, consumables, cadavers, packaging according to their hazard characteristics and through authorized waste managers.

CE4.5 In a practical scenario of cleaning and operating equipment for application of biocidal products, on the basis of given conditions:

-Apply team assembly techniques, according to the team instruction manual.

-Unmount the biocides application equipment, according to the instruction manual.

-Perform the washing operations of the work equipment/instruments, according to established protocol.

-Perform rinsing operations on work equipment/instruments, according to established protocol.

C5: Fulfill newsletters and/or information forms to superiors and authorities, as set out in applicable regulations.

CE5.1 Identify newsletters and/or forms of information, according to the recipient.

CE5.2 In a practical scenario for the development of an action report, to inform the technical officer, on the basis of the conditions of application of biocidal products:

-Select documents based on treatment with biocides.

-Fill in the report based on the data of the products used and the treated areas.

-Point in the report the incidents and deviations of the action program.

-Indicate the security deadlines before reusing the treated zones.

Capabilities whose acquisition must be completed in a real workbench:

C1 with respect to CE1.5; C2 with respect to CE2.6; C3 with respect to CE3.6; C4 with respect to CE4.5; C5 with respect to CE5.2.

Other capabilities:

Take responsibility for the work you are developing, completing the tasks within the set deadlines.

Prove a good professional.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Interpret and execute work instructions.

Respect internal organization procedures and rules.

Contents:

1. Application systems and instruments

Physical media: Installation of ultrasonic devices. Installation of attractants.

Localized application: Installation of traps and baits. Brush strokes and sprinkle machines. Brushes, brushes, application syringes, treatment rafts, CIP systems.

Environmental application: Autokeys, pressure sprayers, nebulizers, thermonebulizers, aerosol and spray machines. Bio-and biological products.

Personal protection equipment.

Environment protection equipment (signaling and beacon material).

Mobile communication system.

2. Rodents of economic interest and public health

Home mouse, other types of mice, gray and black rat, other rodents that can cause urban pests and in the natural environment.

Indirect signs of identification of rodents: traces, noises, smells, holes, burrows. Quantification of the population of rodents: Direct observation, measure of food consumption. Capture, marking and recapture: labeled portacebes.

Communicable diseases by rodents, passive de-ratization measures.

Products and means of rodenticides, protocols and forms of application of products and media used as rodenticides.

Collection of information for evaluation.

3. Arthropods of economic interest and public health: Characteristics of arthropods: insects, arachnids, crustaceans and myripods

Arthropod-borne diseases, economic damage caused by arthropod pests, arthropods simply bothersome.

Indirect signs of arthropod identification: traces, faeces, noises, smells, holes, damage to food and objects, quantification of the pest.

Passive disinsation measures.

Products and means in the control of pests caused by arthropods, protocols and forms of application of products and means used in the control of arthropod pests.

Collection of information for evaluation.

4. Infectious agents: Major infection-causing agents

Infectious processes that constitute diseases.

Physical and chemical methods of infection control.

Contrasting results, reinfection prevention protocols.

In situ preparation of products and means for pest control: Pre-production procedures for product and instrument preparation, conditioning, testing and regulation of the applicator system.

5. Pest control processes/harmful organisms

Good cleaning and disinfection practices.

Biocidal Products.

Interpreting security data tokens.

Preparation of product solutions at different concentrations.

Physical media types of pest control/harmful organisms.

Description and operation of utensils, instruments and equipment: Types, uses and applications. Operational maintenance.

6. Newsletters and forms

Identifying documents: Data from the company that performs the pest control service.

Situation diagnosis or problem identification.

Environmental corrective measures, recommended treatment, identify those responsible for treatment.

Action Plan Documents: Situation Diagnosis, security measures information realization of the service, model of the service realization certificate.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

1.-Domain of knowledge and techniques related to the application of means and products for pest control, which will be accredited by one of the following two forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 3: SECURITY AND HEALTH

Level: 2

Code: MF0075_2

Associated with UC: Adopt job risk prevention measures in the workplace

Duration: 60 hours

Assessment capabilities and criteria:

C1: Identify the risks associated with the environmental activity and conditions of the facilities.

CE1.1 Identify the risks derived from machine and tool handling: traps, cuts, projections, among others.

CE1.2 Identify the risks arising from handling of lifting and transport equipment: entrapments, cuts, overefforts, vibrations, noise, among others.

CE1.3 Identify the risks arising from load management and application of forces: falling objects, musculoskeletal injuries, among others.

CE1.4 Identify the risks of explosion and fire, associated with the activities and environmental conditions of the facilities.

CE1.5 Identify the risks arising from exposure to chemical, physical and biological agents associated with the activity.

CE1.6 Recognize the risks arising from the storage of products, associated with the activities and environmental conditions of the facilities.

Ce1.7 Recognize the risks arising from supply facilities: electrical energy, water, gases, compressed air, among others.

CE1.8 Recognize the risks derived from the characteristics of the workplaces: Escaleras, work platforms, traffic surfaces, among others.

CE1.9 Recognize the risks arising from the performance of the work and the environmental conditions of the facilities.

C2: Apply prevention and protection measures to risks arising from specific activity.

CE2.1 Recognize the means of collective protection applied to the types of risks: safeguard protections, immaterial barriers, general ventilation, localized extraction, among others.

CE2.2 Detect the emergency situations associated with an activity and its intervention in them.

CE2.3 In a scenario of selection of the E.P. I, from the given protection material:

-Select the individual head protection equipment.

-Select the individual respiratory protective equipment.

-Select the individual face and eye protection equipment.

-Select the individual trunk and limb protection equipment.

-Select individual protection equipment against height falls.

-Select individual protection equipment against noise and vibration.

-Select individual protective equipment from chemical, biological, and radiation risks.

-Select the individual protective equipment against thermogrometric conditions.

C3: Apply first aid techniques in the workplace.

CE3.1 Identify the medications and material of cures that form the first aid kit.

CE3.2 Recognize the symptoms of poisoning, injury, and apply first aid techniques.

CE3.3 Identify first aid action protocols on leaks, spills, or discharges of hazardous products.

CE3.4 In a practical scenario of acting in an emergency, in the workplace, from a given condition:

-Select the information and communication media for the emergency.

-Apply the first aid technique, depending on the nature of the emergency.

Capabilities whose acquisition must be completed in a real workbench:

C2 with respect to CE2.3; C3 with respect to CE3.4.

Other capabilities:

Take responsibility for the work you are developing, completing the tasks within the set deadlines.

Prove a good professional.

Communicate effectively with the right people at every moment, respecting the channels established in the organization.

Interpret and execute work instructions.

Respect internal organization procedures and rules.

Contents:

1. Applicable Basic Regulations on Occupational Risk Prevention

Applicable rules for the prevention of occupational risks. Regulation of the Prevention Services. Applicable rules.

2. Identifying the risks associated with the activity

Risks by organizational factors: Organization. Shift work. Risks due to material factors: Order and cleanliness. Places of work. Ventilation and air conditioning. Noise. Vibrations. Lighting. Risk for use of elements: Manual tools. Manipulation of objects. Lift and transport. Machines. Electrical hazards: Electrical installations. Electrical equipment. Fire and explosion risks: Types of fire. Detection, alarm and extinction equipment. Extinguishing agents.

Risks for substance use: Entry and absorption paths. Types of substances (physical, chemical and biological). Effects on the body. Risks from explosion to radiation: ionizing radiation. Non-ionising radiation. Risks by overefforts: Physical load. Mental load.

3. Application of preventive measures, protection measures and First Aid techniques

Individual protective equipment (EPIs): skull protection (cap, harness). Protection of the face and visual apparatus (welders ' screens, glasses). Protection of the hearing apparatus (stopper, ears, helmet). Protection of the upper extremities (gloves, mittens, mittens, among others). Protection of the lower extremities (footwear with safety point, with security templates, among others). Protection of the respiratory tract (dependent on the environment, independent of the environment, of self-rescue). Protection against aggressive (chemical, thermal, radiation). Signage garments. Protection against fall in height (fastening systems, antacid systems, antacid devices. Signage: In the form of paper. Luminous. Acoustics. Verbal communication. Gestural. Additional. First aid: Contents of the kit. Poisonings. Trauma. Freezing or insolation. Burns. Contusions. Wounds. Bleeding. Bites and bites.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

1.-Domain of knowledge and techniques related to the application of occupational risk prevention measures in the workplace, which will be accredited by one of the following two forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education) or other higher level education related to the professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

ANNEX II

PROFESSIONAL QUALIFICATION: CONTROL AND PROTECTION OF THE NATURAL ENVIRONMENT

Professional Family: Safety and Environment

Level: 3

Code: SEA030_3

General Competition

Manage the natural environment through the control and monitoring of natural spaces, and the use, restoration, maintenance, management and defense of natural resources, complying with the regulations in the prevention of employment risks and applicable rules.

Competition Units

UC0083_3: Control and monitor natural spaces and their public use

UC0084_3: Control the use of forest and mineral resources

UC0085_3: Control the use of the cinegetic and fish resources

UC0086_3: Watch and collaborate on natural resource restoration, maintenance, sorting, and defense operations

Professional Environment

Professional Scope

Develops its professional activity in the service of management of the natural spaces, in the field of the activities of control and protection of the natural environment and environment, in the areas of control and surveillance of the spaces natural resources, and the use, restoration, maintenance, management and defense of natural resources. Professional activity is carried out both autonomously and contracted, in the public sphere, be it the General Administration of the State, regional or local authorities, and in the private sector, with private clients and in large, medium and small businesses. Their professional activity is subject to regulation by the competent authority. The principles of universal accessibility are applied in the development of professional activity in accordance with the applicable regulations.

Productive Sectors

It is located in the service sector of natural spaces, in the subsectors related to the control and protection of the natural, forest and agricultural environment.

Relevant occupations and jobs

The terms of the following relationship of occupations and jobs are used with a generic and omnicomprensivo character of women and men.

Forest agents or the like

Forestry and/or forestry technicians

Natural space control technicians

Environmental agents or the like

Associated Training (600 hours)

Training Modules

MF0083_3: Public use and natural environment protection (210 hours)

MF0084_3: Control and monitoring of natural resources (90 hours)

MF0085_3: Control and monitoring of the use of the cinegetic and fish resources (90 hours)

MF0086_3: Control and surveillance of restoration, maintenance, sorting, and defense of natural spaces (210 hours)

COMPETITION UNIT 1: CONTROLLING AND MONITORING NATURAL SPACES AND THEIR PUBLIC USE

Level: 3

Code: UC0083_3

Professional Realizations and Realization Criteria:

RP 1: Control the public use of the natural environment, equipment and works of conditioning and preparation of the natural environment, according to applicable regulations, in order to comply with the regulations for visitors and users.

CR 1.1 Public use activities in the natural environment are controlled according to applicable regulations.

CR 1.2 The characteristics of the natural environment are transmitted to visitors and users, when they are accompanied by public activities in the natural environment.

CR 1.3 The signage, infrastructure and conditioning of public activities in the natural environment are inspected, according to applicable regulations.

CR 1.4 The information of environmental impact assessments prior to the preparation and preparation of the media is transmitted to the competent technicians through the preparation of reports as established.

CR 1.5 The inspection of the works of conditioning and preparation of the natural environment for public use is carried out according to applicable regulations.

CR 1.6 The building, conditioning and preparation materials of the natural environment are controlled according to the public use of the natural environment and applicable regulations.

CR 1.7 Administrative concessions and authorizations for the public use of the natural environment are inspected under applicable conditions and regulations.

RP 2: Carry out the control and monitoring of livestock and livestock, for protection and recovery, according to applicable regulations.

CR 2.1 Public space protection controls based on visitor access and intruders access are performed according to the established protection plan.

CR 2.2 The physical integrity and limits of the public domain and land are controlled according to applicable regulations, with the approval of the invasions or occupations.

CR 2.3 Information on environmental impact assessments of activities or uses in public utilities or livestock pathways is transmitted to the competent Technicians through the production of reports according to set.

CR 2.4 The intervention in the research and/or authorization of future occupations or occupations already existing, is made according to applicable regulations, for the recovery and protection of the public area and the Livestock routes.

CR 2.5 The authorisation and performance of the use or occupation in the natural environment and/or in the livestock routes are confirmed according to applicable regulations.

CR 2.6 The means of control and surveillance of the mountains and livestock routes are used according to the operation to be carried out.

RP 3: Control the biocenosis of the natural environment, according to established protocol and by intervening with the responsible technicians, to maintain the ecological balance, to promote their conservation and/or recovery, complying with the regulations applicable.

CR 3.1 Wild and plant animal species are identified according to the aspects of their biology and their geographical distribution.

CR 3.2 The intervention, with the competent Technicians, in the sampling techniques for the evolution, reproduction and conservation of the populations, is carried out as established in the protocol.

CR 3.3 The pathological monitoring of the animal species of the natural space is carried out according to the established procedures, and the treatments are applied according to the instructions received.

CR 3.4 The capture of the animals is carried out according to their status and the measures established, for subsequent slaughter or transfer to the recovery or laboratory centre.

CR 3.5 The intervention with the Technicians responsible for the location and elimination of alien species that pose a threat to the native species catalogued, is carried out according to established protocol.

CR 3.6 Polio, collection, unauthorized tenure, public exposure, naturalization, trafficking, trade, among others, of cataloged species, are reported according to established protocol, adopting precautionary measures for safeguard the specimens.

CR 3.7 The living or dead specimens, or parts thereof, or their propagalos, which lack the documentation for their tenure, are made available to the competent authorities, complying with the applicable regulations.

CR 3.8 The activities in the natural environment that pose a serious, immediate and direct threat to specimens of endangered species of flora or fauna, are paralyzed according to applicable protocol and regulations.

CR 3.9 Information to the public at the Recovery Centers, Botanical Gardens, Cria Centers in captivity, among others, is transmitted according to established protocol.

CR 3.10 The information to the public on environmental education activities and on the conservation of animal and/or plant species is carried out, together with the competent technicians, according to established protocol.

RP 4: To monitor the management of waste in the natural environment, according to established protocol, for the protection of the natural environment, complying with the applicable regulations.

CR 4.1 The samples of the discharges and/or residues, soil, plants and animals of the natural environment are collected according to the protocols established for each of them.

CR 4.2 The sampling of discharges and/or residues, soils, plants and animals is introduced into the established container, following the established protocol.

CR 4.3 The sampling of discharges and/or residues, soils, plants and animals is sent for analysis, following the established protocol.

CR 4.4 Reports of waste management in the natural environment are elaborated from the 'on site' observations, following the established protocol.

CR 4.5 The operation of the automatic equipment arranged by the waste management companies is valued according to the applicable regulations or the environmental declaration established.

CR 4.6 The intervention in the investigation of the authorship or the responsibilities of persons or entities that act in the environmental incidents in the natural environment, is made by formulating denunciations, crowded or the reports that come, complying with the applicable rules.

RP 5: Inform activities that infringe or maintain the Paleontological and historical heritage located in the natural environment, for the conservation and protection of the natural environment, according to applicable regulations.

CR 5.1 The findings of fossils in new or existing fields are reported, based on their location, characteristics, ownership of the soil and possible threats.

CR 5.2 The denunciation and intervention of the specimens of the unauthorized collection of fossils, the relocation, the deterioration or destruction of the same, are carried out according to the applicable regulations.

CR 5.3 The findings of historical remains in new or existing fields are reported, taking into account their location, characteristics, soil ownership and potential threats.

CR 5.4 The denunciation and intervention of the specimens of the unauthorized collection of historical remains, the dislocation, the deterioration or destruction thereof, are carried out according to the applicable regulations.

RP 6: Carry out monitoring and surveillance of natural areas, including the Natura 2000 Network (RN2000), to preserve biodiversity at European Union level.

CR 6.1 Monitoring of the conservation status of habitats and species included in Special Conservation Zones declared under national and EU regulations is carried out in accordance with established protocols. by the competent public administration.

CR 6.2 The surveillance of activities that are carried out in special protection zones (SPAs) are carried out, taking into account the authorisation regime granted or the Zone Management Plan.

CR 6.3 The strategies for habitat and species conservation are applied according to the plan for the recovery or conservation of the habitat and the species established.

Professional Context:

Production media:

Optical equipment: binoculars, catalejo. Communication equipment: portophone, radio, radio station. Containers for sampling. Species marking material: rings, radioactive markers, radio transmitters. Vehicles. Distinctive uniforms. Indicative signals. Natural building materials used traditionally for the construction of small works of a rustic character. Aerial photography. Compass. GPS. Information technologies, computer equipment and application-specific software in the management of natural spaces.

Products and results:

Controlled the public use of the natural environment, equipment and works of conditioning and preparation of the natural environment. Carried out the control and surveillance of the montes and cattle roads. Controlled the biocenosis of the natural environment intervening with the responsible Technicians. Monitoring the management of waste in the natural environment. Information about activities that violate or sustain the Paleontological and historical heritage located in the natural environment.

Information used or generated:

Mapping. Bibliography and field guides. Plans for the management of the natural space. Plans for the use and management of the natural space. International, national, regional and local regulations. Instructions developed by the higher bodies responsible for the physical space. Reports and statistics on the state of flora and fauna and on discharges and residues. Reports of denunciation or atado. Habitat and space conservation status monitoring manuals.

COMPETITION UNIT 2: CONTROL THE USE OF FOREST AND MINERAL RESOURCES

Level: 3

Code: UC0084_3

Professional Realizations and Realization Criteria:

RP 1: To intervene in the work of inventory of forest resources, according to established protocol, for the management of the forest masses, complying with the applicable regulations.

CR 1.1 Data-taking auxiliary jobs (dasometry and topography) are executed by following the instructions received and complying with the applicable regulations.

CR 1.2 The inventory of forest resources is elaborated by pointing out the forest masses and established protocol.

CR 1.3 The intervention in the management of the forest masses is carried out as established in protocols.

RP 2: Monitor the operations included in the wood harvesting phases, according to established protocol, to ensure the conservation of the forest lands, complying with the applicable regulations.

CR 2.1 The application for the use of wood is accompanied by reports of viability, necessity, risks, and justification of the requested, according to the plans of use and regulations applicable.

CR 2.2 The completion of the previous and final minutes, minutes of pointing of the short ones to be carried out and counted in white, in the performances and the use of the wood in the natural environment, is carried out before remaking or successful use of a profit, according to applicable rules.

CR 2.3 The assistance to the auctions for the use of wood in public mountains is carried out as a representative of the Forestry Administration.

CR 2.4 The short, meeting, unpacking, loading, and transportation phases of the wood are monitored, according to established protocol.

CR 2.5 The cessation of actions in the use of wood is carried out when they are concerned with the conservation of forest resources.

CR 2.6 The denunciation of unauthorised actions, in the use of wood, is made according to applicable regulations.

RP 3: Monitor the operations of the use of resin, cork, wild fruits, pastures, aromatic and medicinal plants, according to the plans of use established, for the maintenance of the resources forest, complying with applicable regulations.

CR 3.1 Applications for the use of resin, cork, wild fruits, pastures and aromatic and medicinal plants are accompanied by reports of viability, necessity, risks, and justification of the requested, according to the plans of use of the applicable rules and regulations.

CR 3.2 The completion of the previous and final minutes, for the performances and the use of resin, cork, wild fruits, grasses, aromatic and medicinal plants in the natural environment, is carried out in front of successful use of a profit, according to applicable rules.

CR 3.3 Assistance to auctions for the use of resin, cork, wild fruits, pastures and aromatic and medicinal plants in public mountains is carried out as a representative of the Forestry Administration.

CR 3.4 The phases of execution of the cork, wild fruits, pastures, aromatic and medicinal plants are monitored according to the plan of use established.

CR 3.5 The cessation of performances in the use of cork, wild fruits, pastures, aromatic and medicinal plants is carried out when they are concerned with the conservation of forest resources.

CR 3.6 The denunciation of the unauthorized actions, in the use of cork, wild fruits, pastures, aromatic and medicinal plants, is made according to applicable regulations.

CR 3.7 The facilities and operations related to the activity of beekeeping are controlled according to established procedures, and applicable regulations.

RP 4: Control the use of minerals, mines and quarries in the natural environment, for the maintenance of minerals, mines and quarries, according to applicable regulations.

CR 4.1 The environmental impact study is carried out together with the competent technicians, in the face of the requests for the concessions for the extraction of minerals in the natural environment.

CR 4.2 Administrative concessions on mineral extraction are monitored according to applicable regulations.

CR 4.3 The use of minerals is monitored according to applicable conditions and regulations.

Professional Context:

Production media:

Measuring Instruments: Metric tape, Forcypula, bark gauge, growth bit, clisimeter, clinometer, hippeter. Instruments of orientation, agrimensura and topography: hand compass, alidades, grinders ' squad, optical prism, tape metrics, pocket stereosscopes, GPS. Binoculars, stations, "hydes", weapons, planes, aerial frames, stereoscopes. Information technologies, computer equipment and application software in the management of natural spaces.

Products and results:

Inventory of the forest resources made. Supervised the use of wood, resin, cork, wild fruits, pastures, aromatic and medicinal plants. Controlled the use of minerals, mines and quarries in the natural environment.

Information used or generated:

Schedule of the jobs. Technical information on methods and processes for obtaining the various forest products. Yields rates for the various operations. Safety and hygiene standards in forestry work. Tables for the cubication and valuation of forest products. Legislation in force on activities related to the use of natural resources: wood, fruit, cork. Cartography and aerial photography. Acts of denunciation and atado. Previous, final, short-to-do and blank-counted minutes.

COMPETITION UNIT 3: CONTROLLING THE USE OF THE CINEGETIC AND FISH RESOURCES

Level: 3

Code: UC0085_3

Professional Realizations and Realization Criteria:

RP 1: Control the Cynetic species in the regime of freedom and according to established protocol, for the use of the cinenetic, complying with the applicable regulations.

CR 1.1 Cynetic species are identified according to the aspects of their biology and their geographical distribution.

CR 1.2 The remains of dead specimens, tracks and signals are conditioned, if applicable, according to established protocol.

CR 1.3 Cynetic species and species that are harmful to hunting are captured for subsequent census and/or control, according to established methods and in compliance with applicable regulations.

CR 1.4 The diseases and epizootic diseases of the species of the Cynetic species in the regime of freedom are detected, through the tasks of surveillance and protection of the hunting species.

CR 1.5 The report of diseases and epizootic diseases of the Cynetic species in the regime of freedom, is exposed to the sanitary technicians according to established protocol.

CR 1.6 The prophylactic and/or therapeutic measures, if appropriate, apply to the non-life species on the basis of freedom, together with the health technicians.

RP 2: To control activities in the natural environment that affect the hunting species in the regime of freedom and their habitat, according to established protocol, for the maintenance of the species of the Cynetic species in the regime of freedom and complying with the applicable rules.

CR 2.1 The work scheduled for the improvement of the habitat of the species of the Cynetic species (fences, seeds, feeders, drinking, shelter, improvement of the bushland and tree vegetation) are carried out according to established protocol.

CR 2.2 The intervention in the monitoring and control of populations of smaller and larger hunting species, is subsequently carried out to the repopulations of smaller and larger hunting species of a hunting space.

CR 2.3 Hunting trophies (in hand and field) are valued according to the official scales.

CR 2.4 The hunting and hunting activities of space or coto are monitored, according to applicable regulations.

CR 2.5 The hunting activities that affect the hunting species in the regime of freedom and their habitat, are collected in the reports, according to established protocol, for their subsequent denunciation.

CR 2.6 The hunting pieces and the means used in the activity, which do not comply with the applicable regulations, are involved according to established protocol, for further denunciation.

RP 3: Carry out the monitoring, control, monitoring and protection of the species of inland waters under the freedom regime, as well as supervise the work of improving the aquaculture space, for the use of fish, according to established protocol and complying with applicable regulations.

CR 3.1 The aspects of the biology and ecology of the continental water species and their area of distribution are identified according to established protocols.

CR 3.2 The useful, fishing modalities, river sections, fishing activities, furtivism and aggression on river ecosystems are monitored according to the applicable regulations.

CR 3.3 Field data is taken according to the work instructions.

CR 3.4 The monitoring and use of fish stocks in inland waters is carried out in accordance with applicable rules.

CR 3.5 The intervention in the work of artificial repopulation of continental species is carried out, following the established procedures and instructions.

CR 3.6 The study of populations of animal species is carried out, taking into account the catches of breeding specimens, marking techniques, monitoring and transport of fish, elimination of competing or undesirable species (exotic) and deschestes, acting according to work instructions.

CR 3.7 The intervention of the specimens obtained in the illegal fishing practice is carried out, according to established protocol, for further denunciation.

CR 3.8 The planting and/or conservation works of riverbank and aquatic vegetation, for use as a shelter or feeding zone for fish stocks, are monitored in accordance with established protocols.

Professional Context:

Production media:

Optical equipment: binoculars, catalejo. Communication equipment: telephone, radio, radio stations. Species marking material: rings, radioactive markers, radio transmitters. Equipment for collection of remains, traces and samples. Catching equipment. Water sampling equipment. Distinctive uniforms. Indicative signals. Compass. GPS. Mobile telephony. Vehicles. Information technologies, computer equipment and application software in the management of natural spaces.

Products and results:

Control of the Cynetic species in the regime of freedom. Controlled the activities in the natural environment that affect the species of the Cynetic species in the regime of freedom and their habitat. Carried out the work of surveillance, control, monitoring and protection of the species of inland waters under the freedom of movement. Report or complaint minutes.

Information used or generated:

Mapping. Field bibliography: Wildlife guides and field guides. Plans for the management of natural resources. Plans for the use and management of the natural space. International, national, regional and local legislation. Instructions drawn up by the higher bodies. Reports and statistics on the state of the fauna.

COMPETITION UNIT 4: MONITOR AND COLLABORATE ON OPERATIONS FROM RESTA URATION, MAINTENANCE, SORTING, AND DEFENSE OF NATURAL RESOURCES

Level: 3

Code: UC0086_3

Professional Realizations and Realization Criteria:

RP 1: Monitor forestry and hydrological restoration work, following management and restoration plans, for the maintenance and defense of natural resources.

CR 1.1 The execution of the repopulation and reforestation works is verified, as established in the legal, technical and environmental impact reports, of the same.

CR 1.2 The execution of soil preparation work is verified, as planned in the plans for the management and restoration of natural resources.

CR 1.3 The operations carried out in the plant restoration work, the hydrological correction and the protection of unstable land and with taludes are verified, according to the established program.

CR 1.4 The studies of marras and investigation of the causes of damage, in the repopulations already carried out, are reported, to the holder or the director of the work, according to established protocol.

CR 1.5 Allowed and prohibited uses in repopulations already made, are controlled by the management and restoration plans.

RP 2: To monitor the destruction of the scrub and the herbaceous tapestry, among others, own of the forest masses ' silvicultural treatments, according to the applicable regulations, for the defense of the environment and natural resources.

CR 2.1 Cultural tasks (destruction of the shrubland and herbaceous tapestry, among others), applied to the forest masses, are verified as established and respecting the harmony of the environment.

CR 2.2 The work of the machinery and tools of the destruction of the scrub and herbaceous tapestry, in the treatments conducive to the elimination of the competing plant cover, are monitored as planned and the regulations applicable.

CR 2.3 The work of the machinery and tools specific to the specific work of the care of the forest masses (laboring of the soil, fertilisation, decapado, brooding, pruning, clean, clear, clear) is monitored according to the established plans and complying with the applicable rules.

RP 3: Carry out pest control and plant diseases in the natural environment, depending on the biological cycle of the species and established protocols, to maintain and conserve the natural environment.

CR 3.1 The presence of pests, diseases, and other biological or mechanical sources of damage affecting the forest masses are detected according to established protocol for the completion of the established report.

CR 3.2 The counts or counts of pest and fauna thresholds are performed at each checkpoint, according to established protocol.

CR 3.3 Sample counts and sampling are performed with the instrument and at the time established, depending on the biological cycle of each pest, parasite or predator.

CR 3.4 Personal equipment, means of application, products and doses for localized treatments of small areas and aerial treatments of large surfaces are monitored according to the characteristics of the pest or disease to be treated, so that the effects on the natural environment are minimised.

CR 3.5 Field sheets/sketches in the field of pest and forest disease detection are completed according to the established program.

RP 4: To monitor the prevention, extinction of forest fires and restoration of fire zones, in accordance with the planned plan and established protocol, to prevent forest fires or restoration of the natural environment, complying with the applicable rules.

CR 4.1 Fire conates and/or risk situations are detected, according to established protocol.

CR 4.2 The intervention in the elaboration of reports, reports of Complaints and/or Atstates, when the activity or concession in the natural environment is liable to cause forest fires, is carried out according to established protocol.

CR 4.3 The authorization and execution of activities in the natural environment are controlled, according to the established protocol and in conditions of safety, for the prevention of forest fires.

CR 4.4 Intervention in awareness campaigns and information to the population on the safe use of fire in agricultural and hiking activities is carried out according to established protocol.

CR 4.5 The performance in a fire is performed according to applicable regulations.

CR 4.6 The methods of fighting in a fire conate are applied in a coordinated manner with other equipment and means involved in the extinction, according to the plan established.

CR 4.7 The parts and statistics of incidents, damages and statistics related to the extinction of the fire, are completed according to established protocol, for later use in investigation of causality, denunciations, aids and grants, among others.

[CR 4.8] The burned lands are monitored by avoiding restricted or prohibited actions, controlling the evolution of the vegetation in the area of fire, assisting the technicians in the visits to the fire area for the area. planning of actions to be undertaken, and monitoring for forestry or restoration work, as set out in the applicable regulations.

RP 5: Carry out control of invasive alien species in the natural environment in accordance with approved eradication plans to maintain and conserve the natural environment.

CR 5.1 Species monitoring is performed according to the approved protocols and the existing invasive alien alert networks.

CR 5.2 The eradication of alien species is performed according to approved protocols, monitoring the removal of remains.

CR 5.3 Information to the population, to prevent the advancement of invasive alien species, is carried out through awareness campaigns.

CR 5.4 The advancement of alien species, with no approved eradication plans, is controlled by invasive alien alert networks.

Professional Context:

Production media:

Machinery for the treatment of scrub and herbaceous tapestry. Machinery and means for planting. Instruments for measuring measurements. Instruments of agricultural and topography. Instrument of measurements on plane. Machinery and tools for the cultural work of the soil. Machinery and equipment for the treatment of flight. Equipment, tools and materials for fighting fires. Personal protective equipment and first aid equipment. Detection and control equipment for the application of pests and diseases. Plant protection equipment. Plant material for planting and/or sowing. Plant protectors. Plant protection products and for biological control against forest parasites. Pruning wound protector. Oils and fuels. Tools for maintenance and small repairs. Miscellaneous building materials.

Products and results:

Supervised forestry and hydrological restoration work. Watch the work of the forest masses ' silvicultural treatments. Carried out the control of pests and plant diseases in the natural environment. Monitor the prevention, fire extinguishing and restoration of fire zones, in accordance with the planned plan and established protocol, and complying with the applicable regulations.

Information used or generated:

Schedule of the jobs. Technical information on processes and methods used in afforestation, forestry work and forest mass advocacy. Sampling criteria and tables for the cubication and valuation of forest products. Legislation in force on reforestation, silvicultural treatments and fire fighting. Cartography and aerial photography. Regulations on the use of plant protection products, employment limitations and tolerable levels of waste. Field tabs. Manual of plant protection products with their active material and toxicity. Technical-sanitary regulations for the manufacture, placing on the market and use of pesticides. Acts of denunciation and atado. Catalogues of invasive alien species. Plans for the eradication of invasive alien species.

TRAINING MODULE 1: PUBLIC USE AND PROTECTION ACTIVITIES OF THE M NATURAL ENVIRONMENT

Level: 3

Code: MF0083_3

Associated with UC: Controlling and monitoring natural spaces and their public use

Duration: 210 hours

Assessment capabilities and criteria:

C1: Analyze the elements of construction, services, itineraries, works of preparation and conditioning of the natural environment, according to the public utility of the natural space.

CE1.1 List building materials based on the natural environment.

CE1.2 Specify the equipment and signals according to the utility of the itinerary in the natural environment.

CE1.3 To cite the regulations applicable to the regulation of the construction and use of infrastructures for recreational and educational use in the natural environment.

CE1.4 In a practical scenario of preparing a report on the conservation status of an itinerary in the natural environment, on the basis of given conditions:

-List the parts of a report on the conservation status of an itinerary in the natural environment.

-Identify the state, use of the infrastructure and recreational and educational equipment of the itinerary, according to established procedure.

-Select the support material for the collected information.

-Set inspection calendar based on itinerary maintenance protocol.

CE1.5 In a practical scenario of analyzing a public itinerary, based on a given condition:

-Establish the topography of the land, flora, fauna, landscape and conditions of use, of the itinerary.

-Select the service elements according to the public use of the itinerary.

-Develop the graphic material of the itinerary, according to the public use of the itinerary.

C2: Carry out surveillance and control of the natural environment, following the established natural environment protection plan.

CE2.1 Identify areas for visitor and intruders control, according to the natural environment protection plan.

CE2.2 Operate with mapping, compass, GPS, binoculars and means of transmission, in the surveillance and control of the natural environment.

CE2.3 Describe the representation elements of a plane (scales, cotas, rendering systems).

CE2.4 Identify methods and instruments of measurement of terrain, orientation and location, taking into account the protection of the natural environment.

CE2.5 List the parts of the report of an alleged violation committed in the natural environment.

CE2.6 In a scenario of surveillance and control of the natural environment, on the basis of given conditions:

-Use the essential function controls of a radio transmitter, according to established protocol.

-Locate the place where the communication is effectively set.

-Communicate messages with clear, intelligible language, in a concrete and short form.

C3: Analyze the plant and animal species of the natural space to maintain the ecological balance, according to the plan of conservation and/or recovery of the species.

CE3.1 Describe the relationships between living beings and their environment, according to the aspects of their biology and geographic distribution.

CE3.2 Distinguished methods of sampling, tracking and trapping of species, according to established procedure.

CE3.3 Explain the health control measures of the fauna, taking into account the established protocols.

CE3.4 Select the form of collection, preservation, and transport of samples, according to established protocol.

CE3.5 Elaborate reports on diversity, density, range, behavior, and health status of species present in the natural environment.

CE3.6 Interpret the plans for the recovery and/or conservation of protected species.

CE3.7 In a practical scenario of analysis of plant and animal species in a natural space, based on a given condition:

-Identify the flora and fauna present in the natural space.

-Identify signs and traces of animals, according to established procedure.

-Identify symptoms and pathogens of natural space species, following established protocols.

-Elaborate censuses and sampling of species, according to established protocols, for further control.

-Take samples and prepare them, according to established protocol, for shipment to the laboratory.

C4: Analyze the control operations of waste and/or discharges, of plants or animals to the natural environment, according to established procedure.

CE4.1 Identify physical contaminants from natural spaces.

CE4.2 Explain the processes of contamination of natural spaces, according to the polluting agent (residue, vegetable or animal dumping).

CE4.3 Interpret the applicable regulations for pollution in the natural environment.

CE4.4 In a practical analysis of the analysis of waste control operations, plant or animal discharges, on the basis of given conditions:

-Select the system of sampling of residues and/or discharges, of plants or animals, according to the procedure established for each of them.

-Select the sample takeover canister, according to the procedure set.

-Develop the report on the "in situ" observations of waste management in the natural environment.

C5: Protect the constitutive elements of the paleontological and historical heritage of the natural environment, complying with the applicable regulations.

CE5.1 Identify paleontological and historical remains in natural spaces.

CE5.2 Select cultural and protection actions for new or existing fields, complying with applicable regulations.

CE5.3 In a practical case of protection of the paleontological and historical heritage of the natural environment, based on the following conditions:

-Report the findings of fossils, indicating location, characteristics and ownership of the soil, among others.

-Report the findings of historical remains, indicating location, characteristics and ownership of the soil, among others.

-Quantify the aggressions to the historical, paleontological patrimony, according to established procedure.

-Validate the aggressions to the historical, paleontological patrimony, according to established procedure.

C6: Identify the parameters that define the conservation of natural spaces based on criteria for the preservation of biodiversity in the European Union.

CE6.1 Identify the Community and national legislation developed by the Natura 2000 Network (RN2000).

CE6.2 Name the Management Plans of the Conservation Zones of the RN 2000 in the scope of action.

CE6.3 List the procedures for monitoring the status of the habitats and species of the Special Conservation Zones (ECZs) of the RN2000.

CE6.4 In a scenario of conservation of a natural space, from a given condition:

-Identify the management plan for the conservation areas of the RN2000, according to the given conditions.

-Select the parameters that define the conservation of the natural space.

-Identify the procedure for monitoring the status of the habitat and species of the natural space, according to the given conditions.

Capabilities whose acquisition must be completed in a real workbench:

C1 with respect to CE1.4 and CE1.5; C2 with respect to CE2.6; C3 with respect to CE3.7; C4 with respect to CE4.4; C5 with respect to CE5.3; C6 with respect to CE6.4.

Other capabilities:

Take Responsibility for the work that is developed and the fulfillment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to your activity.

Propose alternatives with the aim of improving results.

Demonstrate cordiality, kindness, and conciliatory and sensitive attitude to others.

Participate and actively collaborate on the work team.

Adapt to the organization by integrating into the system of technical-professional relations.

Interpret and execute work instructions.

Transmit information clearly, in an orderly, clear and precise manner.

Act quickly in danger situations.

Contents:

1. Ecology

Ecology concepts.

Ecological factors of climate, soil, physiographic and hydrological nature, biotic factors.

Population dynamics.

Typology of ecosystems.

2. The natural environment and balance of a natural space

Biology, distribution, ecology and conservation of the different plant species present in the natural environment.

Biology, distribution, ecology and conservation of the different animal species present in the natural environment.

Damage caused by wild and domestic herbivores, recognition of damage and symptoms, preventive measures.

Damage caused by man, preventive measures, corrective measures.

Population estimation: sampling and censuses, footprints and animal remains.

Capture and tracking techniques, marking, ring, pointing.

Taking samples from animal remains.

Territory usage and management plans, features, key parts.

Spaces included in the Natura 2000 Network. Monitoring of the conservation status of habitats and species. Management plans for the Special Conservation Zones declared in the RN 2000.

3. Water pollution

Water cycle.

Ecological flow concepts.

General pollution indicators.

Water disturbances indicative of contamination.

Consequences for the balance of the natural environment.

Sampling.

Control and control of water pollution, uses and regulations.

4. Surveillance and control techniques: Interpretation of plans and orientation in the natural environment, constructions and traditional rustic materials in the area

Ways and points of detection. Surveillance and handling of equipment. Visitor access controls.

Defense media: use. Ground patrol.

Feature mapping of the natural environment.

Instruments used for the interpretation of planes and orientation in the natural environment. Characteristics and regulations of itineraries in the natural environment.

Construction materials. Features. Equipment for public use and signalisations. Regulations on buildings and installations in the natural environment.

5. Public Use Spaces: Communication and attention to visitor groups

Natural spaces, protected spaces, areas of public use, uses and regulations.

Communication devices, radio communication networks, features and maintenance. Oral, visual and written communication.

Itineraries in the natural environment, graphic and audiovisual material.

Techniques, materials and apparatus used.

Application legislation.

6. Environmental impact

Concept. Types. Assessment.

Environmental impact and ecological damage produced by human activities.

Precautions and measures to be taken to prevent or minimize damage.

Correction of impact and damage caused, techniques.

7. Paleontological and historical heritage

Training.

Classes.

Surveillance.

Conservation.

Applicable regulations.

8. Legislation on the protection and management of public use of the natural environment

International, European, National and Autonomous.

Environmental impact assessment legislation.

Legislation of the mountains: law of mountains, forest laws of the Autonomous Communities, regulations, livestock roads.

Criminal violations.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

Professional profile of trainer or trainer:

1.-Domain of knowledge and techniques related to the control and monitoring of natural spaces and their public use, which will be accredited by one of the following two forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education), Technical Engineering, Technical Architecture, Diplomacy or other higher level of professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 2: MONITORING AND MONITORING NATURAL RESOURCE USES

Level: 3

Code: MF0084_3

Associated with UC: Control the Leveraging of Forest Resources and mine rales

Duration: 90 hours

Assessment capabilities and criteria:

C1: Analyze the characteristics of the planning of the forest exploitation, according to the technical planning plans.

CE1.1 Interpret the technical specifications of a project to use forest products.

CE1.2 Explain the methods of treatment of forest species, according to technical management plans.

CE1.3 Describe the characteristics of forest product use, taking into account the plan of forest exploitation.

CE1.4 In a practical scenario of analysis of the planning of the forest exploitation, based on the given conditions:

-Identify the permanent forest area where wood exploitation is authorized.

-Indicate the forest planting zone (s), according to the planning of the forest exploitation.

-Indicate the forest surface that will be cut to dedicate the land to other uses.

C2: Verify the characteristics of the work of harvesting the forest products, according to the planning established.

CE2.1 List the characteristics of systems, techniques, and work procedures for the use of wood, wood and other forest products, according to the plan established.

CE2.2 Explain the systems of valuation, measurement and signalling of stocks and products in a forest use, taking into account the given conditions.

CE2.3 In a practical case of validation of the use of forest products, based on the following conditions:

-Identify systems, techniques, and work procedures in each of the phases of the use.

-Attend auctions for the use of wood in public mounts, as planned.

-Analyze the layout and characteristics of the track and track network, taking advantage of the use of forest products.

C3: To verify forest and environmental regulations, according to the work of harvesting forest products.

CE3.1 List the regulations concerning the performance of the work of harvesting the forest products.

CE3.2 Describe the environmental impact and ecological damage caused by the use of forest products.

CE3.3 Identify techniques, to avoid or correct environmental impact and ecological damage caused by the work of harvesting forest products, according to applicable regulations.

CE3.4 In a practical assumption of verification of forest and environmental regulations in the use of forest products, on the basis of given conditions:

-Confirm the execution of the work of harvesting forest products, according to applicable regulations.

-To comply with the previous and final Acts of the use of forest products, according to applicable regulations.

-Identify the ecological impact and damage caused by the performance of the work, according to applicable regulations.

-Set the conditions for handling the products obtained, according to applicable regulations.

C4: Verify the characteristics of the work of harvesting minerals, mines and quarries, according to applicable regulations.

CE4.1 List techniques, characteristics and procedures for the use of minerals, mines and quarry.

CE4.2 In a practical assumption of verification of the works of exploitation of minerals, mines and quarries in the natural environment, from a given conditions:

-Analyze applications for the extraction of minerals in the natural environment, according to applicable regulations.

-Interpret the documents of a project of mineral use, according to the works of mining, mines and quarries established.

Capabilities whose acquisition must be completed in a real workbench:

C1 is concerned with CE1.4; C2 with respect to CE2.3; C3 with respect to CE3.4; C4 with respect to CE4.2.

Other capabilities:

Take Responsibility for the work that is developed and the fulfillment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to your activity.

Propose alternatives with the aim of improving results.

Demonstrate cordiality, kindness, and conciliatory and sensitive attitude to others.

Participate and actively collaborate on the work team.

Adapt to the organization by integrating into the system of technical-professional relations.

Interpret and execute work instructions.

Transmit information clearly, in an orderly, clear and precise manner.

Act quickly in danger situations.

Contents:

1. Technical plans and projects for the use of forest products

Characteristics, key parts, plans, technical specifications.

Use, concept, and types.

Forest and environmental legislation in the works of exploitation.

2. Treatment of forest masses

Treatments on high, low and medium mount.

Specific treatments: cork, resin, fruits, aromatic plants, medicinal plants, beekeeping and mushrooms.

3. Systems of work, assessments, measurements and points of use in forest exploitation

Measurement and pointing operations, measuring and pointing devices, assessment of forest exploitation.

Phases of the operations of the wood and lenas, classification of the different products by type.

Systems for obtaining other forest products.

Corcho: Tree extraction, removal, sorting, loading, transport, resin, stimulating products, and conservation.

Fruits: collection, removal, transportation, and conservation.

Wild plants and Setas: collection, packaging, conservation and marketing.

Beekeeping.

Systems for conservation, improvement and use of pasture: Characteristics, plant species, livestock management, infrastructure.

Systems for the opening and conservation of roads, tracks and tracks: Types and technical characteristics.

4. Tools, apparatus, materials, equipment, media and machines for the use of forest products

Cutting tools and machinery.

Means of unpacking and meeting.

Load and transport media.

Machinery for breaking and grinding debris.

Tools, materials and equipment characteristic of the use of other forest products. Machinery and means for opening and maintaining roads, tracks and sacs.

Apparatus and means for the cubication, measurement, weight and capacity of the different forest products. Wardrobe and security and personal protection equipment.

Usage and maintenance techniques.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

1.-Domain of knowledge and techniques related to the control of the use of forest and mineral resources, which will be accredited by one of the following two forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education), Technical Engineering, Technical Architecture, Diplomacy or other higher level of professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 3: MONITORING AND MONITORING OF USE OF THE S SCIENTIFIC AND FISH RESOURCES

Level: 3

Code: MF0085_3

Associated with UC: Controlling the Use of Kinetic Resources and Fish Fish

Duration: 90 hours

Assessment capabilities and criteria:

C1: Analyse the biology, habits and geographical distribution of the species of the Cynetic and continental waters, according to the plan for the use of the Cynetic and fish farming.

CE1.1 Describe the characteristics of the habitats of the Cynetic and continental waters, taking into account the plan for the use of the Cynetic and fish farming.

CE1.2 List aspects of the management of the Cynetic and Continental Water species, according to the plan of use.

CE1.3 Explain the processes of evolution and variation of populations of the Cynetic and continental waters.

CE1.4 Describe the characteristics of diseases that affect the cynetic and continental water species for their treatment.

CE1.5 Describe the main characteristics and biological cycles of the predatory and competing species to the cynetic and continental waters species.

CE1.6 In a practical analysis of the biology, habits and geographical distribution of the species of the Cynetic and continental waters, based on the following conditions:

-Calculate the parameters and rates of assessment of the state of the cynetic or continental waters.

-To indicate the control systems of the predatory and competing species to the species of the Cynetic and the continental waters.

-Establish the evolution of a population of species of Cynetic and continental waters.

C2: Carry out surveillance and control of the species of the Cynetic and continental waters, following the plan of exploitation of the scientific and fish resources.

CE2.1 Describe the systems, techniques and procedures for surveillance, monitoring, capture and marking of individuals and populations of the Cynetic and continental waters.

CE2.2 Explain the characteristics, operation and techniques of use of apparatus, equipment and means for the surveillance, monitoring, capture and marking of individuals and populations of the Cynetic and water species continental.

CE2.3 In a practical scenario of surveillance and control of the Cynetic and continental waters, through the assessment of an apparatus, equipment or means used in the surveillance, monitoring, capture and marking of species Blackwater or fresh water:

-Identify the apparatus, equipment, or media, relating it to the job.

-Point out the parts, parts or components, of the apparatus, equipment or means used in the surveillance.

-Specify the maintenance of the apparatus, equipment, or media used in the surveillance.

-Operate with the apparatus, equipment, or media used in the surveillance.

CE2.4 In a practical scenario of surveillance and control of the hunting and hunting habitat, based on the following conditions:

-Describe systems, techniques and work procedures in the surveillance and control of the cinegitic or fish-farming habitat, taking into account the conditions established.

-Identify the techniques of carrying out the census of the population of the population, according to established protocol.

-Identify the disease and the treatment of a cynetic or fish species, according to established conditions.

-Describe the systems, techniques and control procedures of the competing and predatory species, taking into account the established conditions.

C3: To differentiate the procedures for the improvement of the habitat and repopulation of the species of the Cynetic and continental waters, according to the planning of exploitation of the scientific resources and fish.

CE3.1 Describe the characteristics of the works and works of improvement of the habitat of the Cynetic and continental waters, in the exploitation of the scientific resources and fish farming.

CE3.2 Identify the pratense species used in the improvement of the habitat of the Cynetic species.

CE3.3 List the treatments of tree and tree vegetation in the improvement of the habitat of the Cynetic species.

CE3.4 Write the characteristics of the plant species of ribera and aquatic used as a refuge and feeding zone to the species of continental waters.

CE3.5 Explain the characteristics, infrastructure and equipment of the captive breeding facilities of the Cynetic and continental waters species.

CE3.6 Detailed systems, techniques and procedures for repopulation of cynetic and continental water species.

CE3.7 In a practical analysis of the process of improving the habitat and repopulation of the species of the Cynetic and Continental waters, based on the following conditions:

-Describe the characteristics of the construction and materials used in the improvement of the habitat, according to established procedure.

-Indicate the pratense species established in the improvement procedure.

-Identify the treatments of the bushy and arboreal vegetation established in the procedure.

-Identify the plant species of ribera or aquatic, according to the habitat improvement procedure.

-Identify the repopulation systems, techniques, and repopulation procedures established in the improvement procedure.

CE3.8 In a practical scenario of improving the habitat and repopulation of the Cynetic and continental water species, from a tool, apparatus, machine, equipment or means employed in the work of habitat improvement and restocking of the cynetic or continental waters species:

-Identify the tool, apparatus, machine, team, or media employee, relating to the job or operation set.

-Point out the parts, parts, or components of the tool, apparatus, machine, equipment, or media, describing their function in the process.

-Explain the management of the tool, apparatus, machine, equipment or medium used in the work of habitat improvement and restocking of the species of the Cynetic or Continental waters.

-Explain the maintenance of the tool, apparatus, machine, equipment or means employed in the work of habitat improvement and restocking of the species of the Cynetic or Continental Waters.

-Operate with the tool, apparatus, machine, equipment or means employed in the work of improving the habitat and restocking of the species of the Cynetic or continental waters, according to established procedure.

C4: Interpreting the rules applicable to hunting, fishing and environmental activities, in the management of the space for hunting and the use of water.

CE4.1 Describe illegal hunting, fishing and environmental actions, in the Cynetic and continental waters, according to applicable state and/or regional legislation and regulations.

CE4.2 Identify fishing gear, weaponry and other tools and equipment for the practice of hunting and fishing, taking into account applicable state and/or regional legislation and regulations.

CE4.3 To express the functioning of the legal and legal spaces and of continental waters, and of the federations and societies of hunting and fishing, according to the applicable state and/or regional regulations.

CE4.4 Identify the attributions, responsibilities and their relationship with the Public Administrations of the Cynetic and continental waters, taking into account the applicable state and/or regional regulations.

CE4.5 Describe the valuation scales in hand and in the field of hunting trophies, taking into account the applicable state and/or regional regulations.

CE4.6 Valorar a hunting trophy on naturalized material or on the blackfield, taking into account the applicable state and/or regional regulations.

CE4.7 In a practical scenario of management of the space and the continental waters, based on the following conditions:

-To differentiate the applicable regulations of environmental character, in the management of the cinegitic space or of continental waters.

-Identify illegal hunting, fishing, and environmental performance in the climate and inland waters, according to the applicable state and/or regional regulations.

-Identify the legal precept infringed, according to applicable state and/or autonomic regulations.

-Describe the equipment and means used in detecting illegal action.

-Compose the report of the violation, according to the applicable state and/or autonomic regulations.

Capabilities whose acquisition must be completed in a real workbench:

C1 with respect to CE1.6; C2 with respect to CE2.3 and CE2.4; C3 with respect to CE3.7 and CE3.8; C4 with respect to CE4.7.

Other capabilities:

Take Responsibility for the work that is developed and the fulfillment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to your activity.

Propose alternatives with the aim of improving results.

Demonstrate cordiality, kindness, and conciliatory and sensitive attitude to others.

Participate and actively collaborate on the work team.

Adapt to the organization by integrating into the system of technical-professional relations.

Interpret and execute work instructions.

Transmit information clearly, in an orderly, clear and precise manner.

Act quickly in danger situations.

Contents:

1. Cynetic species, of continental waters, competitors and depredadoras

Cynetic and continental water species: biology, behavioral habits, geographical distribution at national and regional levels, species of hunting major and minor, identification, observation, collection, management and conditioning of materials and signals obtained in the field.

Populations of Cynetic and Continental Waters: dynamics of populations, control and monitoring: techniques, management of the species of Cynetic and continental waters, plans for the use of hunting and fish farming, development, application, diseases of the species of the species, including those of continental waters, treatments, procedures for surveillance, protection and capture of species of blacksea and continental waters, equipment and means, techniques of use and maintenance.

competing and predatory species: biology, behavioural habits, geographical distribution at national and regional level, identification, observation, collection, sorting and conditioning of materials and signals obtained in the field.

2. Habitat of the Cynetic and continental waters species and procedures for habitat improvement of the Cynetic and Continental Waters species

Habitat: features, habitat elements, parameters to assess the status of a habitat.

Habitat improvement procedures: constructions and facilities, materials used, equipment and media, tools, equipment and media, techniques of use and maintenance, planting in the space, species, improvement of the bushy and tree vegetation, treatments, planting and conservation of the riverside and aquatic vegetation.

Repopulations of Cynetic and Continental Water species: captive breeding, cínetic farms and fish farms, repopulations, systems, techniques and procedures, facilities, machinery, equipment and media, utilization and maintenance.

3. Hunting and fishing modalities, regulations, trophy valuation

Hunting and fishing modalities: characteristics, types of cinenetic spaces and fish farming, regulation, operation.

Federations and societies of hunters and fishermen: characteristics, regulations, operation, armaments, types of arms and ammunition, licenses and reviews, artisanal, industrial and sports fishing gear.

Regulations on hunting and fishing: State and regional regulations, environmental regulations for application in the species of hunting and inland waters, furtivism, illegal hunting and fishing practices, detection, report of the infringement, weapons regulations.

Hunting Trophy Valuation: Official trophy scales and valuation tables of different species of hunting, valuation in hand and field, techniques and procedures.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

1.-Domain of knowledge and techniques related to the control of the use of the scientific and fish resources, which will be accredited by one of the following two forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education), Technical Engineering, Technical Architecture, Diplomacy or other higher level of professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.

TRAINING MODULE 4: CONTROL AND SURVEILLANCE OF RESTORATION, MAINTENANCE, MANAGEMENT AND DEFENSE OF NATURAL SPACES

Level: 3

Code: MF0086_3

Associated with UC: Watch and collaborate on natural resource restoration, maintenance, management, and defense operations

Duration: 210 hours

Assessment capabilities and criteria:

C1: Explain the components of the work of planting trees and shrubs on the mountain and of hydrological restoration, taking into account the characteristics of the natural spaces.

CE1.1 Explain the parts that make up a project of afforestation, reforestation or hydrologic, detailing the characteristics and objectives of each of them.

CE1.2 Describe the characteristics of the forest species used in the reforestations, according to the characteristics of the natural spaces.

CE1.3 Describe the systems, techniques and work procedures of the phases and operations of the reforestation process, taking into account the characteristics of the natural spaces.

CE1.4 Define the characteristics of the plant material used in the reforestations.

CE1.5 Describe the types of hydrological correction constructs, depending on the characteristics of the natural spaces.

CE1.6 In a practical scenario of reforestation of a natural space, from a given condition:

-Identify the aspects and forecasts of the reforestation project.

-Identify machinery, tools, tools, equipment and media according to reforestation work.

-Indicate the qualitative and/or quantitative deviations and/or defects of the work with respect to the established reforestation planning.

-Identify the machine, but, tool, material, medium, or equipment of the reforestation work.

CE1.7 In a practical case of hydrological-forestry correction, based on the following conditions:

-Describe the type and model of hydrological-forest correction, according to the hydrologic-forest restoration.

-Identify the constructive material established in the hydrologic-forest restoration.

-Describe the system of work established in the hydrologic-forest restoration.

-Identify the machinery, tools, equipment and media used in hydrologic restoration.

C2: Identify the silvicultural treatments of the soil and the flight of the forest masses and the auxiliary works, for their inventory and management, according to the plans of ordination and defense of the natural spaces.

CE2.1 Describe the parts of the management projects and the technical management plans.

CE2.2 Explain the concepts and technical terminology of forestry.

CE2.3 List the silvicultural treatments of the soil and the flight of the forest masses and the logical sequence of execution of the same, according to the plans of ordination and defense of the natural spaces.

CE2.4 Citar the systems, techniques and work procedures of forest mass silviculture treatments, taking into account the plans of defense of the natural spaces.

CE2.5 In a practical case of identification of the silvicultural treatments of the soil and of the flight of a forest mass, from a project of management or plan of management of the natural spaces and conditions given:

-Identify the aspects and forecasts of the silvicultural treatments of the soil and the flight of a forest mass, according to the draft management plan or technical plan.

-Identify, according to the management plan or technical management plan, the silvicultural treatments and the established prior and auxiliary works, for the management and inventory of the forest mass.

-Describe the systems, techniques, and work procedures set out in the management project or management plan.

-Identify machinery, tools, equipment, equipment and means established in the management project or technical management plan for each operation.

-Appreciate the qualitative and quantitative deviations and/or defects of the jobs with respect to the existing schedule.

C3: Specify the procedures for the detection and control of pests, diseases, and other alterations of the forest masses, according to the plan of defense against pests and diseases.

CE3.1 To express the alterations of the forest masses, grouping them by types of causative agents.

CE3.2 Describe the control systems of the agents causing the alterations in the forest masses, as set out in the plan of defense against pests and diseases.

CE3.3 Explain the characteristics of the pest and forest disease treatment products, according to the established procedure.

CE3.4 Identify abiotic agents and biotic-causing disorders in the forest masses, according to the plan of defense against pests and diseases.

CE3.5 In a practical analysis of the procedure for the detection and control of pests, diseases and alterations of the forest masses, based on the following conditions:

-Detect the systems and techniques for the detection and control of pests, diseases and alterations of the forest masses, established in the work procedure.

-Identify machinery, tools, apparatus, equipment and means established in the procedure for the detection and control of pests, diseases and alterations of the forest masses.

-Point out the qualitative and quantitative deviations and/or defects of the jobs with respect to the existing schedule.

-Specify the timing of surveillance and control of pests and diseases, as established in the procedure for the detection and control of pests, diseases and alterations of the forest masses.

C4: Explain the characteristics of the prevention, surveillance and extinction of forest fires, according to the plan of defense of the natural spaces.

CE4.1 Describe the characteristics of a forest fire, listing the causes and phases of the fire.

CE4.2 List the types and characteristics of forest fires.

CE4.3 Explain the elements of a forest fire and the factors that determine its importance.

CE4.4 Describe prevention and alert systems and systems against forest fires and their operation.

CE4.5 Name the operations and actions of the process of extinction of a forest fire.

CE4.6 Recognize forest fire suppression systems, techniques, and procedures.

CE4.7 Define the characteristics of the coordination of forest fire extinguishing operations involving the effective intervention of different organisms.

CE4.8 In a scenario of prevention, warning and/or extinction of forest fires, based on the following conditions:

-Describe the established systems, techniques, and procedures of action, according to the given conditions.

-Identify machinery, equipment and means used in the prevention, warning and/or extinction of forest fires.

-Distinguished the human and material resources established in the prevention, alert and/or extinction of forest fires.

-Meet the parts and statistics of forest fire characteristics and their extinction.

C5: Interpret forest and environmental regulations in the work of restoration, maintenance, management and defense of natural resources.

CE5.1 Describe the reforestation work, silvicultural treatments, inventories, control of changes in the forest masses, prevention and extinction of fires, taking into account the regulations of forestry and environmental.

CE5.2 Describe the environmental impact and ecological damage caused by reforestation work, silvicultural treatments, pest treatments, diseases and forest fire extinction.

CE5.3 In a practical scenario of reforestation work, silvicultural treatments, inventories, control of changes in the forest masses, prevention and extinction of fires, based on the following conditions:

-Identify forest and environmental regulations applicable to reforestation work, silvicultural treatments, inventories, control of changes in forest masses, fire prevention and extinction.

-To value the degree of application of forest and environmental regulations in reforestation work, silvicultural treatments, inventories, control of changes in the forest masses, prevention and extinction of fires.

-Identify the ecological impact and damage caused by the performance of reforestation works, silvicultural treatments, inventories, control of changes in the forest masses, prevention and extinction of fires.

C6: Control the eradication of invasive alien species in the natural environment, following approved eradication protocols.

CE6.1 Identify Invasive Alien Species Catalogs and Eradication Plans.

CE6.2 Interpreting the biology of invasive alien species.

CE6.3 Distinguished vectors that lead to the emergence and expansion of invasive alien species.

CE6.4 List the climatic and anthropic factors that allow for its expansion.

CE6.5 In a practical assumption of the eradication of exotic species in the natural environment, from an exotic species given:

-Identify the exotic species, according to the catalog of invasive alien species.

-Describe the life cycle of the exotic species and its reproduction.

-Select the eradication technique, taking care of the established eradication plan.

Capabilities whose acquisition must be completed in a real workbench:

C1 with respect to CE1.6 and CE1.7; C2 with respect to CE2.5; C3 for CE3.5; C4 for CE4.8; C5 for CE5.3; C6 for CE6.4.

Other capabilities:

Take Responsibility for the work that is developed and the fulfillment of the objectives.

Demonstrate a degree of autonomy in the resolution of contingencies related to your activity.

Propose alternatives with the aim of improving results.

Demonstrate cordiality, kindness, and conciliatory and sensitive attitude to others.

Participate and actively collaborate on the work team.

Adapt to the organization by integrating into the system of technical-professional relations.

Interpret and execute work instructions.

Transmit information clearly, in an orderly, clear and precise manner.

Act quickly in danger situations.

Contents:

1. Forestry, reforestation and hydrological forestry projects

Characteristics and key parts of the project, species used in forest repopulations, species characteristics.

Systems, techniques and procedures for afforestation: delimitation of the surface and preliminary work, treatment of herbaceous tapestry and/or scrub preparation of the land, planting or planting, repositioning of marras, machinery, Tools, apparatus, equipment and media, techniques for use and maintenance, human and material media needs.

Hydrological restorations: actions of biological control of erosion, planting and plantations, works and works of hydrological correction, systems and procedures, works transversal to the channel, characteristics, types, Longitudinal works, characteristics and types, machinery, tools, equipment and materials, human and material means.

Forest management projects and technical management plans: characteristics, key parts, periodic reviews.

2. Forestry

Basic silvicultural concepts, cultural characters of forest species, types.

Forestry treatments of the forest masses: treatments of the soil and treatments of the flight. Systems, techniques and procedures for silvicultural treatments: instruments, apparatus, machinery, tools and equipment, use and maintenance, human and material means.

3. Auxiliary work for the inventory and management of forest masses

Inventory, procedures, and modes.

Signages: realization techniques.

Measuring measuring devices: techniques for use and maintenance.

4. Detection of pests, diseases and other disturbances of the forest masses

Agents causing alterations and damage, classification, biotic and abiotic agents.

Damage-causing organisms: morphology and biology, affected species, type of damage, symptomatology, identification.

Treatment of pests, diseases and other disorders: systems of struggle, biological, integrated, chemical.

Treatments: preventive and curative, terrestrial and aerial, characteristics, means, machinery and equipment, techniques of use and maintenance, products, types, mode of action, preparation, human and material means.

5. Forest fires

Elements, types, features, causes, phases, zones, and shapes.

Forest fuel disposal and reduction system, girdles and firewall areas, auxiliary strips of tracks and controlled scrub.

Machinery, tools, tools and equipment, utilization and maintenance techniques, human and material resources.

Prevention of forest fires, prevention and warning infrastructures, monitoring, fixed and mobile posts, operation of the warning, location and identification of forest fire.

Transmission systems, equipment, media and apparatus, utilization and maintenance techniques. Extinction of forest fires, systems, techniques and procedures, machinery, tools, equipment and media, techniques of use and maintenance, aerial means, features and equipment.

Protective equipment, first aid, evacuation of accidents.

Agencies that can intervene in extinction, coordination, operational modalities, operations management, single or collegiate command.

Documentation to be completed after a forest fire.

Ecological damage to reforestation work, silvicultural treatments, pest and disease treatments, and forest fire suppression.

6. Environmental impact

Concept, types, rating.

Environmental impact and ecological damage produced by human activities.

Precautions and measures to be taken to prevent or minimize damage.

Correction of impact and damage caused, techniques.

Invasive alien species. Catalogues. Biology of the species. Eradication plans. Expansion vectors.

7. Applicable regulations and security

Regulations on the protection and management of public use of the natural environment: International, European, National and Autonomous.

Environmental impact assessment regulations, forest and environmental regulations in restoration, maintenance, management and defense of the forest masses.

Law of mountains; forest laws of the Autonomous Communities; Normative pathways.

Safety and occupational health regulations. Specific security rules in the workbench.

Safety in the handling of equipment, machinery and transport vehicles: risks associated with the handling of machinery, storage, characteristics of specific equipment of individual work. Preventive maintenance of equipment and machinery.

Personal protective equipment (PPE ' s): protection of head, face and neck, specific protection of limbs, other protective equipment: harnesses, belts, among others.

Training context parameters:

Spaces and installations:

The spaces and facilities will provide a response, in the form of a classroom, a workshop, a workshop of practices, a laboratory or a singular space, to the training needs, according to the Professional Context established in the Unit Partner competence, taking into account the applicable regulations of the production sector, risk prevention, occupational health, universal accessibility and environmental protection.

Professional or former trainer profile:

1.-Domain of knowledge and techniques related to surveillance and collaboration in the operations of restoration, maintenance, management and defense of natural resources, which will be accredited by one of the two Following forms:

-Level 2 academic training (Spanish Framework of Qualifications for Higher Education), Technical Engineering, Technical Architecture, Diplomacy or other higher level of professional field.

-Professional experience of a minimum of 3 years in the field of competencies related to this training module.

2.-Accredited pedagogical competence according to what the competent administrations establish.