Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200 /1995 of 28 December ("Official State Gazette" No. 32, of 6 February 1996), and having regard to the file of the rules approved by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985 of 1 August 1985 and recognized by the additional provision of Royal Decree 2200/1995 of 28 December
,This Directorate General has decided to publish in the "Official State Gazette" the relationship of Spanish standards UNE approved by the Spanish Association for Standardisation and Certification for the month of July 2015, identified by its title and numerical code, which is listed as an annex to this resolution.
This resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, 3 September 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Rules edited in July 2015
Title | |||
---|---|---|---|
UNE 26107:2015 | Road Vehicles. Systems for the immobilization and removal of victims of traffic accidents based on individualized seats fitted with immobilization cinches with removable backing. |
| |
26108:2015 | Road vehicles. Emergency lighting systems in conditions of darkness based on the propulsion of chemiluminescent fluids. |
| |
UNE 53935:2014/1M: 2015 | Construction of double-walled tanks by in situ transformation of fiberglass reinforced plastic (PRFV) tanks. |
| |
53991:2011 IN/1M: 2015 | Plastics. Repair and interior coating of metal deposits, for the storage of liquid petroleum products, with reinforced plastics. |
| |
UNE 60405-1:2015 | gaseous fuels. PE-metal transition mechanical links for networks, connections and receiving facilities with maximum operating pressure up to 10 bar. Part 1: General requirements. | UNE 60405-1:2003 UNE 60405-1/1M: 2004 UNE 60405-1:2003/2M: 2008 | |
UNE 60405-3:2015 | gaseous fuels. PE-metal transition mechanical links for networks, connections and receiving facilities with maximum operating pressure up to 10 bar. Part 3: Unmountable mechanical links. | UNE 60405-3:2003 UNE 60405-3/1M: 2004 UNE 60405-3:2003/2M: 2009 | |
UNE 104304:2015 | Synthetic Materials. Put into play. Determination of the strength of the weld by peeling between installed synthetic sheets used in waterproofing. |
| |
UNE 104424:2015 | Synthetic Materials. Put into play. Tunnel waterproofing systems and galleries with prefabricated PVC-P. | UNE 104424:2000 | |
118006:2015 | Tobacco and tobacco products. Determination of the moisture in tobacco in the tobacco and tobacco. Gravimetric method by drying on stove. | UNE 118006:2010 | |
118023:2015 | Tobacco. Control test sample. Requirements and application. | UNE 118023:2010 | |
155402-1:2015 | Fresh Hortons. Controlled production. Tomato produced incorporating biological control methods against pests. Series I. | UNE 155402:2010 | |
155403-1:2015 | Fresh Horsemen. Controlled production. Pepper produced incorporating biological control methods against pests. Series I. | UNE 155403:2010 | |
155404-1:2015 | Fresh Horsemen. Controlled production. Cucumber produced by incorporating biological control methods against pests. Series I. | UNE 155404:2010 | |
155405-1:2015 | Fresh Horsemen. Controlled production. Green Jewish produced incorporating biological control methods against pests. Series I. | UNE 155405:2010 | |
155406-1:2015 | Fresh Horsemen. Controlled production. Courgette produced by incorporating biological control methods against pests. Series I. | UNE 155406:2010 | |
155407-1:2015 | Fresh Horsemen. Controlled production. Aubergine produced by incorporating biological control methods against pests. Series I. | UNE 155407:2010 | |
155408-1:2015 | Fresh Horsemen. Controlled production. Melon produced by incorporating biological control methods against pests. Series I. | UNE 155408:2010 | |
155409-1:2015 | Fresh Horsemen. Controlled production. Watermelon produced by incorporating biological control methods against pests. Series I. | UNE 155409:2010 | |
199142-1:2015 | Equipment for traffic management. Artificial vision. Detection of infringing vehicles. Part 1: Functional specification and application protocols for red semaphore. |
| |
201011:2015 |
| EA 0042:2014 | |
UNE-EN 71-3:2013 + A1:2015 |
Safety of toys. Part 3: Migrating certain items. | UNE-EN 71-3:2013 | |
UNE-EN 131-6:2015 | Escalations. Part 6: Telescopic Escalations. |
| |
UNE-EN 636:2012 + A1:2015 | plywood. Specifications. | UNE-EN 636:2012 | |
UNE-EN 1253-1:2015 | Sinks and siphons for buildings. Part 1: Saps and siphons with hydraulic closure of at least 50 mm. | UNE-EN 1253-1:2003 UNE-EN 1253-2:2004 | |
UNE-EN 1253-2:2015 | Sinks and siphons for buildings. Part 2: Cover sinks and sinks or soil siphons without hydraulic closure. | UNE-EN 1253-1:2003 UNE-EN 1253-2:2004 | |
UNE-EN 1466 :2015/AC: 2015 | Child care items. Capazos and supports. Security requirements and test methods. |
| |
UNE-EN 1537:2015 | Running jobs special geotechnics. Anclages. | UNE-EN 1537:2001 | |
UNE-EN 1866-3:2015 | Fire Extintors mobile. Part 3: Requirements for assembly, construction and pressure resistance of CO2 extinguishers that meet the requirements of EN 1866-1. |
| |
UNE-EN 1991-1-6:2010/AC: 2015 | Eurocode 1: Actions in structures. Part 1-6: General actions. Actions during execution. |
| |
UNE-EN 1991-1-7:2010/A1:2015 | Eurocode 1: Actions in structures. Part 1-7: General actions. Accidental actions. |
| |
UNE-EN 1995-1-1:2006/A2:2015 | Eurocode 5. Project of wooden structures. Part 1-1: General rules and rules for building. |
| |
UNE-EN 10293:2015 | Azeros moulded and forged. Molded steels for general purposes in engineering. | UNE-EN 10293:2006 UNE-EN 10293 :2006/AC: 2008 | |
UNE-EN 12057:2015 | Natural stone products. Platelets. Requirements. |
| |
UNE-EN 12058:2015 | Natural stone products. Floor tiles and stairs. Requirements. |
| |
UNE-EN 12101-8:2015 | Systems for the control of smoke and heat. Part 8: Comgates for smoke control. |
| |
UNE-EN 12309-6:2015 | Sortion appliances for heating and/or cooling using gaseous fuels with a PCI-based calorific consumption of less than or equal to 70 kW. Part 6: Calculation of seasonal yields. | UNE-EN 12309-2:2000 | |
UNE-EN 12390-2:2009/1M: 2015 | hardened concrete tests. Part 2: Manufacture and curing of test pieces for endurance tests. |
| |
UNE-EN 12596:2015 | Betunes and bituminous binders. Determination of the dynamic viscosity by vacuum capillary viscosimeter. | UNE-EN 12596:2007 | |
UNE-EN 12929-1:2015 | Security requirements for cableway installations for people. General requirements. Part 1: Requirements applicable to all installations. | UNE-EN 12929-1:2006 | |
UNE-EN 12929-2:2015 | Security requirements for cableway installations for people. General requirements. Part 2: Additional requirements for double-sided, double-stranded cable cars without a trolley brake. | UNE-EN 12929-2:2006 | |
UNE-EN 12972:2015 |
Cisternas for the transport of dangerous goods. Test, control and marking of metal cisterns. | UNE-EN 12972:2009 | |
UNE-EN 13126-9:2015 | Herrages for Building. Test requirements and methods for windows and balconera doors. Part 9: Herring for tilting windows and pivoting windows. | UNE-CEN/TS 13126-9:2010 EX | |
UNE-EN 13445-4:2015 | Part 4: Manufacture. | UNE-EN 13445-4:2010 UNE-EN 13445-4:2010/A1:2012 UNE-EN 13445-4:2010/A2:2014 | |
UNE-EN 13445-5:2015 | Uncalled pressure-ins. Part 5: Inspection and Testing. | UNE-EN 13445-5:2010 UNE-EN 13445-5:2010/A1:2011 UNE-EN 13445-5:2010/A2:2011 UNE-EN 13445-5:2010/A3:2011 UNE-EN 13445-5:2010/A4:2014 | |
UNE-EN 13718-2:2015 | Healthcare vehicles and their equipment. Air ambulances. Part 2: Operational and technical requirements for air ambulances. | UNE-EN 13718-2:2009 | |
UNE-EN 13953:2015 | Equipment and Accessories for LPG. Pressure safety valves for portable and refillable bottles for liquefied petroleum gases (LPG). | UNE-EN 139553:2004 + A1:2007 | |
UNE-EN 14195:2015 | Metal profiling elements for use in laminated gypsum plate systems. Definitions, specifications, and test methods. |
| |
UNE-EN 14368:2015 | Products chemicals used in the treatment of water intended for human consumption. Manganese dioxide-coated calcium carbonate. | UNE-EN 14368:2004 | |
UNE-EN 14369:2015 | Chemicals used in the treatment of water intended for human consumption. Iron-coated activated granular alumina. | UNE-EN 14369:2004 | |
UNE-EN 14429:2015 | Waste Characterization. Behaviour test during leaching. PH influence on leaching with initial acid/base addition. |
| |
UNE-EN 14533:2015 | Textiles and textile products. Fire behaviour of the articles for bed. Classification scheme. | UNE-EN 14533:2004 | |
UNE-EN 14752:2015 | Railway Applications. Access door systems for rolling stock. | UNE-EN 14752:2007 | |
UNE-EN 14912:2015 | Equipment and Accessories for LPG. Inspection and maintenance of LPG bottle valves during periodic inspection of bottles. | UNE-EN 14912:2006 | |
UNE-EN 14997:2015 | Waste Characterization. Behaviour test during leaching. PH influence on leaching with continuous pH control. | UNE-CEN/TS 14997:2007 EX | |
UNE-EN 15030:2013 + A1:2015 | Chemicals used for the treatment of water intended for human consumption. Silver salts for intermittent use. | UNE-EN 15030:2013 | |
UNE-EN 15207:2015 | Cisternas for the transport of dangerous goods. Male/female connections and electrical power characteristics of auxiliary equipment in hazardous areas with 24 V nominal power supply voltage | UNE-EN 15207:2008 | |
UNE-EN 15863:2015 | Waste Characterization. Behavior test during leaching for basic characterization. Monolith dynamic leaching test with periodic renewal of the leachant under fixed conditions. |
| |
UNE-EN 15948:2015 | Cereals. Determination of moisture and protein. Methods using a near-infrared spectroscope in whole grains. | UNE-EN 15948:2012 | |
UNE-EN 16186-1:2015 | Railway Applications. Driver's cab. Part 1: Visibility, disposition, and access. |
| |
UNE-EN 16247-5:2015 | Audits energy. Part 5: Competition of energy auditors. |
| |
UNE-EN 16264:2015 | Articles pyrotechnics. Other pyrotechnic articles. Cartridges for powder-activated tools. |
| |
UNE-EN 16273:2015 | Applications railway. Via. Transition from forged lanes. |
| |
UNE-EN 16327:2015 | Fighting fires. Positive pressure dosing systems (PPPS) and compressed air foam (CAFS) systems. |
| |
UNE-EN 16564:2015 |
Machines and installations for the extraction and transformation of natural stone. Security. Requirements for bridge-type saws and milling machines, including numerical control versions (NC/CNC). |
| |
UNE-EN 50377-4-2:2015 | Connector assemblies and interconnect components for use in optical fiber communication systems. Product specifications. Part 4-2: Simplex SC/APC Type at 8 degrees cabled on a single-mode fibre of type B1.1 and B1.3 according to Standard IEC 60793-2-50, with ferrule or zirconium cap U. | EN 50377-4-2:2011 | |
UNE-EN 50598-2:2015 | Ecodesign for power electric drives, engine starters, power electronics, and their applications. Part 2: Energy efficiency indicators for power electric drives and for engine starters. |
| |
UNE-EN 60598-1:2015 | Luminaries. Part 1: General requirements and essays. |
| |
UNE-EN 60601-1-6:2010/A1:2015 | Teams Electromedical. Part 1-6: General requirements for basic safety and essential functioning. Collateral Standard: Usage Aptitude. |
| |
UNE-EN 60601-1-10:2008/A1:2015 | Teams Electromedical. Part 1-10: General requirements for basic safety and essential functioning. Collateral Standard: Requirements for the development of closed loop physiological controllers. |
| |
UNE-EN 60695-11-10:2014/AC: 2015 | Tests relating to fire risks. Part 11-10: Test flames. Horizontal and vertical test methods to 50 W. |
| |
Tension jobs. Protective clothing against the thermal hazards of an electric arc. Part 1-2: Test methods. Method 2: Determination of the protective class against the arc of material and clothing using a limited and directed arc (test of the box). |
| ||
UNE-EN 61496-1:2014/AC: 2015 | Machine Security. Electrosensitive protective equipment. Part 1: General requirements and essays. |
| |
UNE-EN 61591:1998/A12:2015 | Campaigns kitchen and other kitchen smoke extractors for domestic use. Fitness measurement methods for the function. |
| |
UNE-EN 62271-201:2015 | high voltage. Part 201: Appearance under alternating current insulator envelope for assigned voltages greater than 1 kV and less than or equal to 52 kV. |
| |
UNE-EN 62676-1-1:2015 | Video surveillance systems for use in security applications. Part 1-1: System Requirements. Generalities. | EN 62676-1-1:2014 EN 62676-1-1:2014/AC: 2014 | |
UNE-EN 62841-3-6:2014/AC: 2015 | Portable, semi-fixed tools and gardening machinery and lawnmowers, powered by electric motor. Security. Part 3-6: Particular requirements for semi-fixed diamond drills with liquid system. |
| |
UNE-EN ISO 3679:2015 |
Determination of inflammation/non-inflammation temperature and determination of the flash point. Method of rapid balance in closed glass. (ISO 3679:2015). | UNE-EN ISO 3679:2004 UNE-EN ISO 3680:2004 | |
UNE-EN ISO 4528:2015 | Finished from the vitreous and porcelain glazes. Guide to the selection of test methods for glazed product areas. (ISO 4528:2015). | UNE-EN ISO 4528:2009 | |
UNE-EN ISO 5356-1:2015 | anesthesia. Conical connectors. Part 1: Male and female connectors. (ISO 5356-1:2015). | UNE-EN ISO 5356-1:2004 | |
UNE-EN ISO 6141:2015 | Gas Analysis. Content of the certificates of the gas mixtures for calibration. (ISO 6141:2015). | UNE-EN ISO 6141:2007 | |
UNE-EN ISO 6508-1:2015 | Metal Materials. Rockwell hardness test. Part 1: Test method. (ISO 6508-1:2015). | UNE-EN ISO 6508-1:2007 UNE-EN ISO 6508-1:2007 ERRATUM: 2011 | |
UNE-EN ISO 6508-2:2015 | Metal Materials. Rockwell hardness test. Part 2: Verification and calibration of test machines and indentators. (ISO 6508-2:2015). | UNE-EN ISO 6508-2:2007 | |
UNE-EN ISO 6508-3:2015 | Metal Materials. Rockwell hardness test. Part 3: Calibration of the pattern blocks. (ISO 6508-3:2015). | UNE-EN ISO 6508-3:2007 | |
UNE-EN ISO 7441:2015 | Metal corrosion and alloys. Determination of bimetallic corrosion by means of exposure to atmospheric corrosion. (ISO 7441:2015). | UNE-EN ISO 7441:1996 | |
UNE-EN ISO 10240:2005/A1:2015 | Small boats. Owner's manual. (ISO 10240 :2004/Amd 1:2015). |
| |
UNE-EN ISO 10447:2015 | Soldeo by resistance. Test of welded joints. Film and film test in welds by resistance by points and by protrusions. (ISO 10447:2015). | UNE-EN ISO 10447:2008 | |
UNE-EN ISO 13845:2015 | Pipeline systems in plastic materials. Elastomeric sealing joints with ring-like connection for use with thermoplastic pressure pipes. The invention relates to a method for testing internal pressure and angular deviation. (ISO 13845:2015). | UNE-EN ISO 13845:2001 | |
UNE-EN ISO 14323:2015 | Soldeo by resistance. Destructive testing of welds. Measures of the test pieces and procedures for the crash-shear test and for the shock-traction test on cross-test pieces of welds by point resistance and by protrusions by means of protrusions. (ISO 14323:2015). | UNE-EN ISO 14323:2006 | |
UNE-EN ISO 14931:2015 | Leather. Guide for the selection of leather for garments (excluding fur with hair). (ISO 14931:2015). | UNE-EN ISO 14931:2005 UNE-EN ISO 14931:2005 ERRATUM: 2005 | |
UNE-EN ISO 15512:2015 | Plastics. Determination of the water content. (ISO 15512:2014). | UNE-EN ISO 15512:2010 | |
UNE-EN ISO 16122-1:2015 | Agricultural Machinery and forest. Inspection of sprayers in use. Part 1: Generalities. (ISO 16122-1:2015). |
| |
UNE-EN ISO 16122-2:2015 | Agricultural and forestry machinery. Inspection of sprayers in use. Part 2: Horizontal bar pulverizers. (ISO 16122-2:2015). | UNE-EN 13790-1:2004 | |
UNE-EN ISO 16122-3:2015 | Agricultural Machinery and forest. Inspection of sprayers in use. Part 3: Pulverizers for tree and tree crops. (ISO 16122-3:2015). | UNE-EN 13790-2:2004 | |
UNE-EN ISO 16122-4:2015 | Agricultural Machinery and forest. Inspection of sprayers in use. Part 4: Fixed and semi-movable pulverizers. (ISO 16122-4:2015). |
| |
UNE-EN ISO 16396-1:2015 | Plastics. Polyamide (PA) materials for molding and extrusion. Part 1: System of designation, marking of products and bases for specifications. (ISO 16396-1:2015). | UNE-EN ISO 1874-1:2011 | |
UNE-EN ISO 16948:2015 | Solid biofuels. Determination of the total carbon, hydrogen and nitrogen content. (ISO 16948:2015). | UNE-EN 15104:2011 | |
UNE-EN ISO 16968:2015 | Solid biofuels. Determination of minority elements. (ISO 16968:2015). | UNE-EN 15297:2011 | |
UNE-EN ISO 16993:2015 | Solid biofuels. Conversion of analytical results from one base to another. (ISO 16993:2015). | UNE-EN 15296:2011 | |
UNE-EN ISO 16994:2015 | Solid biofuels. Determination of the total sulphur and chlorine content. (ISO 16994:2015). | UNE-EN 15289:2011 | |
UNE-EN ISO 17070:2015 | Leather. Chemical tests. Determination of the content of the isomers of tetrachlorophenol, tricolorophenol, dichlorophenol and monochlorophenol and in pentachlorophenol. (ISO 17070:2015). | UNE-EN ISO 17070:2007 | |
UNE-EN ISO 17228:2015 | Leather. Colour strength tests. Color change with accelerated aging. (ISO 17228:2015). | UNE-EN ISO 17228:2007 | |
UNE-EN ISO 23277:2015 | Non-destructive testing of welded joints. Test by penetrating liquids. Levels of acceptance. (ISO 23277:2015). | UNE-EN ISO 23277:2010 | |
UNE-EN ISO 23278:2015 | Non-destructive testing of welded joints. Test of welded joints by magnetic particles. Levels of acceptance. (ISO 23278:2015). | UNE-EN ISO 23278:2010 | |
UNE-IEC 60092-352:2015 | Power installations in vessels. Part 352: Choosing and installing electrical cables. | UNE 21135-352:1998 | |
-ISO 3781:2015 | Paper and Cardboard. Determination of tensile strength after immersion in water. | UNE 57030:1994 | |
-ISO 5631-2:2015 | Paper and Cardboard. Colour determination by diffuse reflectance. Part 2: Outer daytime lighting conditions (D65/10th). |
| |
-ISO 5636-3:2015 | Paper and Cardboard. Determination of air permeance (mean range). Part 3: Bendtsen Method. | UNE 57066-2:1986 | |
-ISO 5636-5:2015 | Paper and cardboard. Determination of air permeance (mean range). Part 5: Gurley Method. | UNE 57066-3:2003 | |
-ISO 11093-2:2015 | Paper and cardboard. Test mandrels. Part 2: Conditioning of samples. | UNE 57163-2:1992 | |
-ISO 12194:2015 | Tobacco sheets. Determining the particle size of the strips. |
| |
-ISO 12195:2015 | Tobacco beaten. Determination of residual vein content. |
| |
UNE-ISO/IEC 27001 :2014/COR 1:2015 | Information Technology. Security techniques. Information Security Management Systems (SGSI). Requirements. |
| |
UNE-ISO/IEC 27002:2015 | Information Technology. Security techniques. Practice code for information security controls. |
|