Advanced Search

Resolution Of 14 September 2015, Of The Directorate-General Of Employment, Which Is Recorded And Published Changes To Salary Level And Act Definitions Of Various Categories Corresponding To The Titration Of The Sec, Professional...

Original Language Title: Resolución de 14 de septiembre de 2015, de la Dirección General de Empleo, por la que se registra y publica el Acta de las modificaciones de nivel salarial y definiciones de varias categorías profesionales, correspondientes a la valoración del seg...

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.

TEXT

Having regard to the text of the minutes of 8 May 2015, where changes in the salary level are approved and definitions of several professional categories corresponding to the evaluation of the second half of 2010 that were submitted to Arbitration of the Provincial Labour Inspectorate, all in accordance with the provisions of Article 9 of the 11th collective agreement of the company National Factory of Currency and Timbre-Real Casa de la Moneda (Convention code No: 90002052011987), published in the BOE of 2-2-2010, minutes that was signed by the Joint Commission of Valuation of which they are part representatives of the company's management and the business committee and accompanying the favourable report issued by the Ministry of Finance and Public Administrations (Executive Committee of the Inter-Ministerial Committee on Remuneration) in compliance with the provisions of Law 36/2014 of 26 December 2014 on the General Budget of the State for 2015, and in accordance with Article 90 (2) and (3) of the Law on the Status of Workers, approved recast text by Royal Decree of Law 1/1995 of 24 March, and Royal Decree 713/2010 of 28 May 2010 on registration and deposit of collective labour agreements and agreements,

This Employment General Address resolves:

First.

Order the registration of the said act in the corresponding Register of collective agreements and agreements working through electronic means of this Steering Center, with notification to the Commission Negotiator and warning to the same of the mandatory compliance of the Law 36/2014, of December 26, of the General Budget of the State for the year 2015, in the execution of the agreements reached.

Second.

Arrange your publication in the "Official State Bulletin".

Madrid, 14 September 2015. -Director General of Employment, Xavier Jean Braulio Thibault Aranda.

Final Act

Address Representatives:

Ms Marta Bedoya Castro.

D. Fernando Lobo of God (adviser).

Workers ' Representatives:

D. Juan Manuel Camara Diaz.

D. José Luis Díaz Jerez (advisor).

In Madrid, on 8 May 2015, the members of the Joint Committee on Valuation are meeting, drawing up this final act, where the results of the assessment of the employment positions are collected. second semester of 2010 that they were submitted to arbitration of the Provincial Labour Inspectorate.

Posts valued or reviewed at the request of the departments:

Posts that rise from level:

Operational Staff.

Official 2nd Machine Type-Values 2 + colors. Dpt. of Value Documents: 9.

Newly Created Posts:

Operational Staff.

Officer 1st Head of Impression-Timbre Team. Department of Timbre: 11.

Officer 2 of Impression-Timbre. Department of Timbre: 9.

Positions rated or reviewed by claim of occupants:

Posts that will not be reviewed for no change of functions:

Operational Staff.

Fresh-Encarted Machine from Smart Cards. Printing Department.

Posts that will be reviewed for a change of functions:

Technical Staff.

Translator. Address of Human Resources.

Multiple.

Categories that disappear:

Officer 1st Head of Transferred Team. Preprint department.

1st Transfer Officer. Preprint department.

Offset Test Shooter. Preprint department.

Mechanical Recorder. Currency department.

Official 1st Hincado and Pulid-Pullide of Cospeles. Currency department.

Driver of the Transporting Machines of the Currency Elevators. Currency department.

Pastas and Cicside Preparation Assistant. Paper Factory department.

Finished Reviewer. Paper Factory department.

Rebober driver. Department of Timbre.

Label Conforming Machine. Department of Timbre.

File Maintainer. Address of Human Resources.

Chief of Computer Equipment. Address of Human Resources.

Museum-Guide. Department of Museum.

Laboratory Technician. Multiple Departments.

Officer 1st Ebanista. Maintenance Department.

Officer 2nd Ebanista. Maintenance Department.

1st Chief Pintor Team. Maintenance Department.

Officer 1st Pintor. Maintenance Department.

Officer 2nd Pintor. Maintenance Department.

Air Conditioning Operation-Calefactor-Frigist. Maintenance Department.

Official 1st Polyvalent-Installer. Maintenance Department.

1st Chief Temple Team Officer. Maintenance Department.

Official 1st Machine Tools. Maintenance Department.

Change Control Production Reviewer and Returns. Department of Timbre.

UEN Auxiliary. Department of Timbre.

Review-Production and Selection of Banknotes. Value Documents department.

Paper Controller Out of Process. Value Documents department.

Production And Control Reviewer and Labors Distribution. Value Documents department.

A Change Controller. Value Documents department.

Calcography Materials Preparer. Value Documents department.

Person relationship and effect dates:

The relationship of the staff affected by this review and the dates of application is published internally in the FNMT-RCM's work centers.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the B.O.E. as an integral part of the Collective Agreement and with the effects of the aforementioned application dates.

Officer 2nd Machine Type-Values Two or more colors. -It is the operator who, with sufficient knowledge of his profession and under the coordination of the 1st Team Chief, collaborates with this in all his functions for the typographical and varnished printing. For which you will perform the following functions:

Sourcing and preparation of raw materials, auxiliaries and products necessary for printing and varnishing, proceeding to their placement, once the work has finished, in the established places.

Preparation of the machine's paper and feeding, taking charge of the correct operation of the marker apparatus and assisting the 1st Team Chief in the preparation and correction of printing, varnish and printing systems auxiliary, including control and safety. Removal of leftover paper at the end of the run. Attention to the power of the varnish.

Extraction of the sactor's folds, verifying its correct printing and numbering, including the control digit, in accordance with the established guidelines, completed of the control forms required, as well as the Stacking of the finished work and placement of the security elements. Monitoring of the automatic pliegos control system by performing the substitutions.

Realization of work changes, collaboration in the assembly and disassembly of machine numerals, adjustments during the run and established maintenance tasks, as well as the cleaning of all machine elements and their Area of action, collaborating with the maintenance staff in the repairs, as long as it is required.

Replacement of the 1st officer during breaks established throughout the working day, keeping the guidelines marked by this one. If necessary, you must report on any matter in your jurisdiction.

Collaboration with Ongoing Product Control in the resolution of the possible neglect of the number of sheets that make up each board, under the dependency of the Head of Unit.

Officer 1st Head of Impression-Timbre Equipment. -It is the operator who, with full knowledge of his profession and coordination capacity, drives any printing machine in offset, or simultaneously combining the systems of typography, flexography, offset and screen printing being responsible for correct quality and production. For which you will perform the following functions:

Preparation of raw and auxiliary materials. Preparation of the machines, assembly and adjustment of their auxiliary elements and systems, including control and safety systems for printing all types of work according to the requirements of the finished product.

Verification of printing during the run according to the self-control guidelines, correcting the detected anomalies. Attention to the control systems of the machines by resolving the incidents that occur.

Performing the work changes by making the necessary adjustments according to the requirements of the work to be printed.

Quantitative and qualitative verification of the product, removal of defective and introduction of repositions, numbing manually if necessary and proceeding, once finished, to the stacking and strapping of the production according to the rules laid down.

Realization of assigned maintenance tasks, resolution of minor breakdowns reporting and assisting Maintenance personnel in repairs whenever required. Cleaning of machines and area of action.

theoretical-practical training of the personnel of your profession, solving all those doubts that may arise in the development of your work.

Filled out of printed and performing the required reports pertaining to your work.

Coordination of the operators of their endowment, and should replace any of them, if necessary, during the breaks established during the working day.

Officer 2nd Impression-Timbre. -It is the operator who, with sufficient knowledge of his profession and under the coordination of the 1st Team Chief, collaborates with this in all his functions for the printing in offset, or combining simultaneously the typography, flexography, offset and screen printing systems. For which you will perform the following functions:

Supply of the machine, preparation, assembly and adjustment of its auxiliary elements and systems, including those of control and safety following the instructions of the 1st Team Chief.

Attention during the run to the control systems that you are assigned to report to the Team Manager and resolve any incidents that occur.

Collaborates with the 1st Team Chief in the work changes by making the necessary adjustments.

Sacador attention, quantitative and qualitative verification of the product, removal of defective and introduction of repositions, numbing manually if necessary and proceeding, once finished, to the stacking and strapping of the product production in accordance with established standards.

Performing the maintenance tasks assigned to you by collaborating with the 1st Team Chief in the resolution of small breakdowns, informing and assisting the maintenance staff in the repairs, provided that they are requires. Cleaning of machines and area of action.

theoretical-practical training of the personnel of your profession, solving those doubts that may arise in the development of your work.

Filled out of the required printed forms relating to your work.

Replacement of the 1st Team Chief during breaks established throughout the workday, maintaining the guidelines marked by this.