Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December ("Official State Gazette", number 32, 6 February 1996), and in view of the case for annulment of the rules submitted by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985 of 1 August 1985 and recognized by the additional provision of the Royal Decree Decree 2200/1995 of 28 December.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE cancelled during the month of August 2015, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, September 10, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Rules cancelled in August 2015
| Title | ||
|---|---|---|
|
61240:1997 |
Piezoelectric devices. Surface mounting device (SMD) sketch preparation for frequency control and selection. General rules. (Ratified by AENOR in December 1997) | |
|
62439-3:2010 | Industrial communication networks. High availability automation networks. Part 3: Parallel Redundancy Protocol (PRP) and Homogeneous High Availability Ring (HSR). (ratified by AENOR in June 2010 | |
|
140400:2003 | Intermediate Specification: Low-dissipation Surface Mount (SMD) fixed resistances (ratified by AENOR in April 2004) | |
|
20532:1973 | Nominal diameters for resistors and capacitors. | |
|
UNE-EN 385:2002 | Empalmes by serrated union in structural wood. Minimum manufacturing specifications and requirements | |
|
UNE-EN 845-1:2005 + A1:2008 | Specifying auxiliary components for factories masonry. Part 1: Keys, moorings, pendants, brackets, and angles. | |
|
UNE-EN 845-2:2005 | Specifying auxiliary components for factories masonry. Part 2: Dintels. | |
|
UNE-EN 845-3:2006 + A1:2008 | Auxiliary component specifications for masonry factories. Part 3: Steel mesh tendel joint armature. | |
|
UNE-EN 1790:1999 | Horizontal road signage materials. Prefabricated vials | |
|
UNE-EN 13225:2005 | Precast concrete products. Linear structural elements | |
| UNE-EN 13225 :2005/AC: 2007 | Precast concrete products. Linear structural elements | |
|
UNE-EN 13808:2005 | Betunes and bituminous binders. Specifications of the cationic bituminous emulsions. | |
|
UNE-EN 13808:2005/1M: 2011 | Betunes and bituminous binders. Specifications of the cationic bituminous emulsions. | |
|
UNE-EN 14080:2006 | Wood structures. Laminated laminated wood. Requirements | |
|
UNE-EN 14080:2006 ERRATUM: 2010 | Wood structures. Laminated laminated wood. Requirements | |
| UNE-EN 14342:2006 + A1:2009 | Wood flooring. Features, compliance assessment, and marking | |
|
UNE-EN 14509:2007 | Dual-faced, self-supporting sandwich sandwich panels. Factory-made products. Specifications | |
|
UNE-EN 14509 :2007/AC: 2009 | Dual-faced, self-supporting sandwich sandwich panels. Factory-made products. Specifications | |
|
UNE-EN 14733:2006 + A1:2011 | Betunes and bituminous binders. Control of factory production of bituminous emulsions, and fluxated and fluidized bitumens. | |
|
UNE-EN 14764:2006 | Bikes of ride. Safety requirements and test methods | |
|
UNE-EN 14766:2006 | Mountain bikes. Safety requirements and test methods | |
|
UNE-EN 14781:2006 | Racing bikes. Safety requirements and test methods | |
|
UNE-EN 14783:2008 | Fully supported metal flaxes and flaxes for covers and indoor and outdoor coatings. Product specification and requirements | |
|
UNE-EN 14915:2007 | Friezes and Wood Bags. Features, conformity assessment, and marking. | |
|
UNE-EN 14915 :2007/AC: 2007 | Friezes and wood-struck. Features, conformity assessment, and marking. | |
|
UNE-EN 15037-4:2010 | Precast concrete products. Voguette and bovedilla forging systems. Part 4: Expanded polystyrene Bovels | |
|
UNE-EN 15322:2010 | Betunes and bituminous binders. Structure of the specification of fluidized and fluxated bituminous binders. | |
|
UNE-EN 15382:2009 | Geosynthetic barriers. Features required for use in transport infrastructures | |
|
UNE-EN 60317-48:2000 | Specifications for particular types of Yarns for electromagnetic coils. Part 48: Circular section copper thread, naked or enamelled, with glass fibre cover impregnated with resin or varnish, temperature index 155. | |
| UNE-EN 60317-49:2000 | Specifications for particular types of wires for electromagnetic coils. Part 49: Circular section copper thread, naked or enamelled, with glass fibre cover impregnated with resin or varnish, temperature index 180. | |
| UNE-EN 60317-50:2000 | Specifications for particular types of wires for electromagnetic coils. Part 50: Circular section copper thread, naked or enamelled, with fiberglass cover impregnated with resin or varnish, temperature index 200. | |
| UNE-EN 60432-3:2004 | Inline lamps. Security requirements. Part 3: Volframo halogen lamps (except vehicles) | |
|
UNE-EN 60432-3:2004/A1:2006 | Inline lamps. Security requirements. Part 3: Halogen-halogen lamps (excluding vehicles) (IEC 60432-3:2002/A1:2005) | |
|
UNE-EN 60432-3:2004/A2:2009 | Lamparas de incandescent. Security requirements. Part 3: Volframo halogen lamps (except vehicles) | |
| UNE-EN 60734:2004 | Appliances appliances. Fitness for the function. Hard water for testing | |
|
UNE-EN 60893-3-1:2004 | Insulating materials. Rigid industrial laminates in irons based on thermosetting resins for electrical purposes. Part 3-1: Specifications for particular materials. Requirements for rigid industrial laminate types in irons | |
|
UNE-EN 61326-1:2006 | Electrical equipment for measurement, control and use in laboratory. Electromagnetic compatibility (EMF) requirements. Part 1: General requirements (IEC 61326-1:2005) | |
|
UNE-EN 61326-2-3:2007 | Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility (EMF) requirements. Part 2-3: Particular requirements. Test configuration, operating conditions and suitability criteria for the function for transducers with integrated or remote signal conditioning. (IEC 61326-2-3:2006). | |
|
UNE-EN 61326-2-4:2007 | Electrical equipment for measurement, control and laboratory use. Electromagnetic compatibility (EMF) requirements. Part 2-4: Particular requirements. Test configuration, operating conditions and performance criteria for isolation monitoring devices in accordance with Standard IEC 61557-8 and for isolation failure location equipment in accordance with IEC Standard 61557-9. (IEC 61326-2-4:2006). | |
|
UNE-EN 61643-11:2005 | Low-voltage lightning rods. Part 11: Pararrays connected to low voltage electrical systems. Requirements and essays. | |
|
UNE-EN 61643-11:2005/A11:2007 | Low voltage lightning rods. Part 11: Pararrays connected to low voltage electrical systems. Requirements and Trials | |
|
UNE-EN 61788-13:2004 | Superconductivity. Part 13: Measure of losses in alternating current. Measurement methods by magnetometer of histerisis losses in Cu/Nb-Ti multiphase compounds | |
|
UNE-EN 62282-6-200:2008 | Fuel Cell Technologies. Part 6-200: Fuel microcell systems. Performance testing methods |
