Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Quality and Industrial Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("Official State Gazette" number 32, 6 of February 1996), and having regard to the file of the rules approved by the Spanish Association for Standardisation and Certification, an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, according to the Royal Decree 1614/1985, of 1 August, and recognized by the additional provision of the said Royal Decree 2200/1995, of December 28,
This Directorate General has decided to publish in the "Official State Gazette" the relationship of Spanish standards UNE approved by the Spanish Association for Standardisation and Certification, corresponding to the month of September 2015, identified by its title and numerical code, which is listed as an annex to this resolution.
This resolution will cause effect from the day following its publication in the "Official State Bulletin".
Madrid, October 5, 2015. -Director General of Industry and Small and Medium Enterprises, Victor Audera Lopez.
ANNEX
Edited rules in September 2015
Title | |||
---|---|---|---|
UNE 15896:2015 | Value Added Purchasing Management. | UNE-CWA 15896-1: 2010 EX | |
19101:2015 | Tubes, ductile fittings and fittings and their joints for use in secondary and local networks. Testing requirements and methods. |
| |
19703:2015 | Health Grifair. Technical specifications. | UNE 19703:2003 | |
une 48316:2014/1m: 2015 | Paintings and varnishes. High performance anti-corrosive decorative enamels on a solvent basis. |
| |
60302:2015 | Canalizations for gaseous fuels. Site. | UNE 60302:1974 | |
60305:2015 | Steel Canalizations for gaseous fuels. Security zones and calculation coefficients by site. | UNE 60305:1983 | |
60309:2015 | Canalizations for gaseous fuels. Minimum thickness for steel pipes. | UNE 60309:1983 | |
60404-1:2015 | Fuels fizzy. Pressure and/or measurement adjustment assemblies, with maximum operating pressure (MOP) of less than or equal to 5 bar. Part 1: Underrun, semi-detached or position assemblies in enclosures with equivalent nominal flow rate of less than or equal to 100 m³ (n) /h of natural gas. | UNE 60404-1:2012 | |
UNE 60714:2015 | Torneated nozzles for connection of flexible pipes intended to drive low-pressure gaseous fuels from the second and third families. |
UNE 60714:1992 UNE 60714 /1M: 2003 |
|
77030:2015 | Water quality. Determining the total residue. | UNE 77030:2002 | |
77032:2015 | Water quality. Determining decantable solids. | UNE 77032:2002 | |
77042:2015 | Water quality. Determination of chlorides. Potentiometric method. | UNE 77042:2002 | |
135340:2010/2M: 2015 | Vertical Senalization: Polypolymeric microprismatic retroreflective Laminas. Test features and methods. |
| |
197010:2015 | General criteria for the reporting and expert opinions on Information and Communications Technologies (ICT). |
| |
UNE-CEN/TR 16470: 2015 IN | Environmental aspects of ductile casting systems for water supply and sanitation applications. |
| |
UNE-EN 71-1:2015 |
Toy safety. Part 1: Mechanical and physical properties. | UNE-EN 71-1: 2012 + A3:2014 | |
UNE-EN 480-13:2015 |
Additives for concretes, mortars and pastes. Test methods. Part 13: Reference Mortero for Masonry for Mortar Additive Assays. | UNE-EN 480-13: 2010 + A1:2011 | |
UNE-EN 853:2015 | Elastomers-based Mangueras and their assemblies with join accessories. Hydraulic type, reinforced with braided wire. Specifications. | UNE-EN 853:1997 UNE-EN 853 :1997/AC: 2007 | |
UNE-EN 8554:2015 | Elastomers-based Manguages and their assemblies with attachment accessories. Hydraulic type with textile reinforcement. Specifications. | UNE-EN 85:1996 UNE-EN 854: 1997 ERRATUM | |
UNE-EN 856:2015 | Elastomers-based Mangueras and their assemblies with join accessories. Hydraulic type, reinforced with covered helical wire. Specifications. | UNE-EN 856:1997 | |
UNE-EN 857:2015 | elastomers and its assemblies with attachment accessories. Hydraulic type, reinforced with compact braided wire. Specifications. | UNE-EN 857:1997 | |
UNE-EN 1013: 2013 + A1:2015 | Plastic Plates translucent single-layer profiles for indoor and outdoor covers, walls, and ceilings. Testing requirements and methods. |
| |
UNE-EN 1396:2015 | Aluminium and aluminium alloys. Continuous coated sheet and strip for general applications. Specifications. | UNE-EN 1396:2008 | |
UNE-EN 1865-1: 2011 + A1:2015 | Equipment for the transport of patients used in road ambulances. Part 1: Specifications for stretchers systems in general and equipment for transporting patients. | UNE-EN 1865-1:2011 | |
UNE-EN 1866-2:2015 | Mobile Fire Extintors-Part 2: Construction requirements, pressure resistance, and mechanical tests of fire extinguishers that meet the requirements of European Standard EN 1866-1 and with a maximum allowable pressure equal to or less than 30 bar. | UNE-EN 1866:2007 | |
UNE-EN 1992-1-1: 2013/A1:2015 | Eurocode 2: Project concrete structures. Part 1-1: General rules and rules for building. |
| |
UNE-EN 12007-3:2015 | Systems of gas supply. Pipes with maximum operating pressure of less than or equal to 16 bar. Part 3: Specific functional requirements for steel. | UNE-EN 12007-3:2001 | |
UNE-EN 12050-1:2015 | Wastewater Elevators for buildings and facilities. Part 1: Waste water elevators containing fecal materials. |
| |
UNE-EN 12050-3:2015 | Wastewater Elevators for buildings and facilities. Part 3: Waste water elevators for limited applications. |
| |
UNE-EN 12050-4:2015 | Wastewater Elevators for buildings and facilities. Part 4: Retention valves for wastewater that do not contain fecal materials and for wastewater containing fecal materials. |
| |
UNE-EN 12309-4:2015 | Heating and/or cooling sorption devices that use PCI-based heat consumption gaseous fuels less than or equal to 70 kW. Part 4: Test methods. | UNE-EN 12309-2:2000 | |
UNE-EN 12493: 2014 + A1:2014/AC: 2015 | Equipment and Accessories for LPG. Pressure vessels in steel welded from tanker trucks for LPG. Design and manufacture. |
| |
UNE-EN 13094:2015 | Cisternas for freight transport dangerous. Metal tanks with a service pressure of up to 0.5 bar. Design and build. | UNE-EN 13094:2009 UNE-EN 13094: 2009 ERRATUM: 2011 | |
UNE-EN 13445-3:2015 | Uncalled pressure-ins. Part 3: Design. | UNE-EN 13445-3:2010 UNE-EN 13445-3: 2010/A1:2013 UNE-EN 13445-3: 2010/A2:2014 | |
UNE-EN 13445-3: 2015/A1:2015 | Unsubmitted to Pressure calls. Part 3: Design. |
| |
UNE-EN 13697:2015 | Antiseptics and Disinfectants. Quantitative non-porous surface test for the assessment of bactericidal and/or fungicide activity of the chemical disinfectants used in foodstuffs, in industry, in the household and in the community. Test method without mechanical action and requirements (phase, stage 2). | UNE-EN 13697:2002 UNE-EN 13697: 2002 ERRATUM: 2007 |
|
UNE-EN 13986: 2006 + A1:2015 | Wood-derived tablets for use in construction. Features, conformity assessment, and marking. |
| |
UNE-EN 14675:2015 | Antiseptics and Chemical Disinfectants. Quantitative suspension test for the assessment of the viricide activity of antiseptics and chemical disinfectants used in the veterinary field. Test method and requirements (phase 2, stage 1). | UNE-EN 14675:2007 | |
UNE-EN 15079:2015 | Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES). | UNE-EN 15079:2008 | |
UNE-EN 15254-6:2015 | Extension of the field of application of the results obtained in the fire resistance tests. Non-bearing walls. Part 6: Light Facades. |
| |
UNE-EN 15429-3:2015 | Barredoras. Part 3: Efficiency of particle uptake. Trial and evaluation. |
| |
UNE-EN 15429-4:2015 | Barredoras. Part 4: Symbols for operator controls and other indicators. |
| |
UNE-EN 16440-1:2015 |
|
| |
UNE-EN 16442:2015 | Controlled environmental storage horses for processed termolabile endoscopes. |
|
|
UNE-EN 16494:2015 | Applications railway. Requirements for ERTMS boards along the path. |
| |
UNE-EN 16615:2015 | Antiseptics and chemical disinfectants. Quantitative assay method for the evaluation of bactericidal and levuricide activity on non-porous surfaces using mechanical action with wipes in the medical area (4-field test). Test method and requirements (phase 2, stage 2). |
| |
UNE-EN 16653:2015 | coated fabrics of plastic or rubber. Determination of the tear resistance of the stitch (with needle). Test method. |
| |
UNE-EN 50121-2:2015 | Railway applications. Electromagnetic compatibility. Part 2: Emission of the entire railway system to the outside world. |
| |
UNE-EN 50121-3-1:2015 | Railway Applications. Electromagnetic compatibility. Part 3-1: Rolling stock. Train and full vehicle. |
| |
UNE-EN 50121-4:2015 | Railway applications. Electromagnetic compatibility. Part 4: Emission and Immunity of Signalling and Telecommunication Devices. |
| |
UNE-EN 50134-3: 2012/AC: 2015 | Alarm Systems. Social alarm systems. Part 3: Local drive and controller. |
| |
UNE-EN 50598-3:2015 | Ecodesign for the power electric drives, engine starters, power electronics and their applications. Part 3: Quantitative approach to ecodesign by analyzing the lifecycle including product category rules and the content of environmental statements. |
| |
UNE-EN 60061-1: 1996/A51:2015 | Casings and Portalamparas, along with the calibers for interchangeability and security. Part 1: Caskets. |
| |
UNE-EN 60061-2: 1996/A48:2015 | Caskets and port-holders, along with the calibers for the control of interchangeability and security. Part 2: Portalamparas. |
| |
UNE-EN 60061-3: 1997/A49:2015 | Caskets and portalamparas along with the calibers for the control of interchangeability and security. Part 3: Calibers. |
| |
UNE-EN 60079-2:2015 | Explosive atmospheres. Part 2: Pressurized Envelope Protection Equipment "p". |
| |
UNE-EN 60079-26:2015 | Explosive Atmosphere. Part 26: Material protection level material (EPL) Ga. |
| |
UNE-EN 60335-2-5:2015 | Appliances and Analog Appliances. Security. Part 2-5: Particular requirements for dishwashers. |
| |
UNE-EN 60335-2-95: 2015/A1:2015 |
Appliances and analogues. Security. Part 2-95: Particular requirements for motorizations for vertical opening garage doors for residential use. |
| |
UNE-EN 60601-2-41: 2010/A1:2015 | Electromedical Equipment. Part 2-41: Particular requirements for the basic safety and essential functioning of surgical luminaires and luminaires for diagnosis. |
| |
UNE-EN 60601-2-54: 2010/A1:2015 | Electromedical Equipment. Part 2-54: Particular requirements for basic safety and essential performance characteristics of X-ray and radioscopy equipment. |
| |
UNE-EN 60793-1-43:2015 | Fiber optics. Part 1-43: Methods of measurement and test procedures. Measure of numeric opening. |
| |
UNE-EN 60885-3:2015 | Electrical test methods for electrical cables. Part 3: Test methods for partial discharge measures on lengths of extruded power cables. |
| |
UNE-EN 62366: 2009/A1:2015 | Medical devices. Application of medical device use fitness engineering. |
| |
UNE-EN 62776:2015 |
|
| |
UNE-EN 62841-2-9:2015 | Portable tools, Semi-fixed and semi-fixed garden machinery and machinery, operated by electric motor. Security. Part 2-9: Particular requirements for portable terrors and rothadors. |
| |
UNE-EN ISO 7494-2:2015 | Odontology. Dental units. Part 2: Air, water, aspiration, and waste water supply systems (ISO 7494-2:2015). | UNE-EN ISO 11144: 1997 UNE-EN ISO 7494-2: 2003 | |
UNE-EN ISO 7539-10:2015 | Metal and alloy corrosion. Corrosion tests under stress. Part 10: Reverse U bending method (ISO 7539-10:2013). |
| |
UNE-EN ISO 7539-11:2015 | Corrosion of metals and alloys. Corrosion tests under stress. Part 11: Guide to the resistance testing of metals and alloys to hydrogen fritization and hydrogen-assisted cracking (ISO 7539-11:2013). |
| |
UNE-EN ISO 9000:2015 | Quality Management Systems. Fundamentals and vocabulary (ISO 9000:2015). | UNE-EN ISO 9000:2005 | |
UNE-EN ISO 9001:2015 | Quality Management Systems. Requirements (ISO 9001:2015). | UNE-EN ISO 9001:2008 UNE-EN ISO 9001: 2008/AC: 2009 | |
UNE-EN ISO 11137-1:2015 | Sterilization of products for healthcare. Radiation. Part 1: Requirements for the development, validation and routine control of a sterilization process for sanitary products (ISO 11137-1:2006, including Amd 1:2013). | UNE-EN ISO 11137-1: 2007 UNE-EN ISO 11137-1: 2007/A1:2014 | |
UNE-EN ISO 11137-2:2015 | Spay of products for healthcare. Radiation. Part 2: Setting the sterilization dose (ISO 11137-2:2013). | UNE-EN ISO 11137-2: 2013 | |
UNE-EN ISO 11151-1:2015 | lasers and equipment associated with lasers. Standard optical components. Part 1: Components for the upcoming UV, visible and infrared spectral intervals (ISO 11151-1:2015). | UNE-EN ISO 11151-1: 2001 | |
UNE-EN ISO 11151-2:2015 | lasers and equipment associated with lasers. Standard optical components. Part 2: Components for the infrared spectral interval (ISO 11151-2:2015). | UNE-EN ISO 11151-2: 2001 | |
UNE-EN ISO 12625-9:2015 | tissue paper and tissue products. Part 9: Determination of resistance to burst by ball (ISO 12625-9:2015). | UNE-EN ISO 12625-9: 2005 | |
UNE-IN ISO 12625-15: 2015 | tissue paper and tissue products. Part 15: Determination of optical properties. Measurement of whiteness and color with C/2º illuminant (internal daytime light) (ISO 12625-15:2015). |
| |
UNE-EN ISO 12625-16:
2015 | Paper tissue and tissue products. Part 16: Determination of optical properties. Opacity (paper background). Diffuse reflectance method (ISO 12625-16:2015). |
| |
UNE-EN ISO 13341: 2011/A1:2015 |
Bottles for gas transport. Coupling the valves to the gas cylinders. Modification 1 (ISO 13341:2010/Amd 1:2015). |
| |
UNE-EN ISO 13408-1:2015 | Processed aseptic of products for health. Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013). | UNE-EN ISO 13408-1: 2011 UNE-EN ISO 13408-1: 2011/A1:2013 | |
Environmental Management Systems. Requirements with guidance for use (ISO 14001:2015). | UNE-EN ISO 14001:2004 UNE-EN ISO 14001: 2004/AC: 2009 | ||
UNE-EN ISO 15197:2015 | In vitro diagnostic test systems. Requirements for blood glucose monitoring systems for self-diagnosis in the management of diabetes mellitus (ISO 15197:2013). |
| |
UNE-EN ISO 16061:2015 | Instrumentation to be used in association with non-active surgical implants. General requirements (ISO 16061:2015). | UNE-EN ISO 16061:2010 | |
UNE-EN ISO 16967:2015 | Solid Biofuels. Determination of majority elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti (ISO 16967:2015). | UNE-EN 15290:2011 | |
UNE-EN ISO 17892-1:2015 | Research and Geotechnical Trials. Laboratory tests of soil. Part 1: Determination of Humidity (ISO 17892-1:2014). | UNE 103300:1993 | |
UNE-EN ISO 18103:2015 | The superfine wool fiber label. Requirements for the definition of the Super S code (ISO 18103:2015). | UNE-CWA 16336:2012 IN | |
UNE-EN ISO 20361:2015 | Bombs and pump groups for liquids. Acoustic test code. Precision classes 2 and 3 (ISO 20361:2015). | UNE-EN ISO 20361:2009 | |
UNE-EN ISO 23640:2015 | Healthcare products for in vitro diagnostics. Assessment of the stability of in vitro diagnostic reagents (ISO 23640:2011). |
| |
UNE-EN ISO 24234:2015 |
Dentistry. Dental amalgam (ISO 24234:2015). | UNE-EN ISO 2423232005 UNE-EN ISO 24234: 2005/A1:2012 | |
UNE-EN ISO 24801-1:2015 | Recreational dive services. Requirements for the training of recreational divers with autonomous equipment. Part 1: Level 1. Monitored diver (ISO 24801-1:2014). | UNE-EN 14153-1:2004 | |
UNE-EN ISO 24801-2:2015 | Recreational dive services. Requirements for the training of recreational divers with autonomous equipment. Part 2: Level 2. Stand-alone diver (ISO 24801-2:2014). | UNE-EN 14153-2:2004 | |
UNE-EN ISO 24801-3:2015 | Recreational dive services. Requirements for the training of recreational divers with autonomous equipment. Part 3: Level 3. Leading diver (ISO 24801-3:2014). | UNE-EN 14153-3:2004 | |
UNE-EN ISO 27971:2015 | Cereals and cereal-based products. Common wheat (Triticum aestivum L.) Determination of the alveographic properties of the mass at constant hydration prepared from commercial flours or flours for testing and the milling test methodology (ISO 27971:2015). |
| UNE-EN ISO 80369-20
|
Small diameter connectors for liquids and gases for sanitary applications. Part 20: Common test methods (ISO 80369-20:2015). |
| ||
UNE-EN ISO/IEC 17021-1: 2015 |
Assessment of compliance. Requirements for the bodies carrying out the audit and certification of management systems. Part 1: Requirements (ISO/IEC 17021-1:2015). | UNE-EN ISO/IEC 17021: 2011 | |
UNE-HD 60364-8-1:2015 |
Low voltage electrical installations. Part 8-1: Energy Efficiency. |
| |
UNE-IEC 60092-360:2015 | Power installations in vessels. Part 360: Isolation materials and covers for power, control, instrumentation, and telecommunication cables installed on ships and offshore units. |
| |
UNE-ISO 6183:2015 | Fire protection equipment. Carbon dioxide extinction systems for use in buildings. Design and installation. |
| |
-ISO 12647-3:2015 | Graphic technology. Process control for the production of color separations, tests and printed forms. Part 3: Offset lithography and typography on newspaper paper. | UNE 54102-3:2000 | |
-ISO 14641-1:2015 | Electronic file. Part 1: Specifications for the design and operation of a digital information preservation information system. |
| |
UNE-ISO 14721:2015 | Spatial Data and Data Transfer Systems. Open file information system (OAIS). Reference model. |
| |
-ISO 16750-3:2015 | Road vehicles. Environmental and testing conditions for electrical and electronic equipment. Part 3: Mechanical loads. |
|