Having regard to the text of the minutes where changes in the salary level are approved and definitions of several professional categories, corresponding to the arbitration of the Provincial Labour Inspectorate of the valuation of the first half of the year 2011 of the company Fábrica Nacional de Moneda y Timbre-Real Casa de la Moneda (convention code No. 90002052011987), which was signed on 18 November 2015 by the Joint Commission of Valuation of which the representatives of the Management of the company and the business committee representing the entity and the employees of the same, which is accompanied by a favorable report issued by the Ministry of Finance and Public Administrations (Executive Committee of the Inter-Ministerial Commission on Remuneration) in compliance with the provisions of Law 36/2014 of 26 December, of the General Budget of the State for 2015, and in accordance with the provisions of Article 90 (2) and (3) of the Law on the Status of Workers, Recast Text approved by Royal Legislative Decree 2/2015 of 23 October, and in the Royal Decree of the Decree 713/2010 of 28 May 2010 on the registration and deposit of collective agreements and agreements job,

This Employment General Address resolves:

First.

Order the registration of the said act in the corresponding Register of collective agreements and agreements working through electronic means of this Steering Center, with notification to the Commission Negotiator with the warning to the same of the mandatory compliance of the Law 36/2014, of December 26, of the General Budget of the State for the year 2015, in the execution of the said Agreement.

Second.

Arrange your publication in the "Official State Bulletin".

Madrid, January 21, 2016. -Director General of Employment, Xavier Jean Braulio Thibault Aranda.

Final Act

Address Representatives:

Dona Marta Bedoya Castro.

Don Fernando Lobo of God (Advisor).

Workers ' representatives:

Don Juan Manuel Camara Diaz.

Don Jose Luis Diaz Jerez (Advisor).

In Madrid, on 18 November 2015, the members of the Joint Committee on Valuation are meeting, drawing up this final act, where the results of the assessment of the relevant jobs are collected. The first semester of 2011 was submitted to the arbitration of the Provincial Labour Inspectorate.

Posts valued or reviewed at the request of the departments.

New creation posts.

Operational Staff.

Official 1. of the Auxiliary Services of Calcography. Value Documents department: 9.

Positions rated or reviewed by claim of their occupants.

Posts that do not go up level.

Technical Staff.

Quality Technician. Internal Audit and Quality Control.

Operational Staff.

Finished reviewer. Paper Factory.

Posts that will not be reviewed for no change of functions.

Technical Staff.

Enajenations Technician. Economics and Finance.

Administrative Staff.

Official 1. Administrative (Treasury). Economics and Finance.

Operational Staff.

Production Auxiliary. Printing.

Subalternate Staff.

Store. Planning, Logistics, and Stores.

Posts that will be reviewed for a change of functions.

Staff With Command.

Head of Area B (Laboratory). Engineering, R & D + i and Laboratories.

Operational Staff.

Operary Manufacturing PVC Cards. Printing.

Multiple.

Person relationship and effect dates.

The relationship of the staff affected by this review and the dates of application is published internally in the FNMT-RCM's work centers.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the "BOE" as an integral part of the Collective Agreement and with the effects of the aforementioned application dates.

Calcography Auxiliary Services Officer 1.

It is the operator who, with full knowledge of his profession, has as mission the attention of the treatment plant of calcopgraphic effluents and the coating of cylinders for printing according to the established norms. For which you will perform the following functions:

Set up and check the proper operation of the plant, verifying its operation by the technical means to control it, and physically the elements that compose it.

Checking the correct process development by modifying the parameters that require it to be reported to the Unit Chief.

Connecting the pumping system of the calcographic machines.

Surveillance of ultrafiltration units, checking their status and performance. Performing the necessary actions based on the parameters marked.

Attention to the system of soapy solution, checking of levels and concentration of the same, determining additives and their proportion in order not to exceed the established values, by reimposing them if necessary.

Checking the absence of discharges, resolving the incidents that occur. Draining and emptying of the sedimentation deposits when necessary.

Commissioning and monitoring of the mixing and distribution machine for cleaning liquid for calcographic machines, taking into account the levels and concentrations, replenishing liquids and modifying percentages according to the indications of the Head of Unit and the Laboratory tests.

Machining of rollers, preparation of pastes, mounting of cylinder in smelting machine, lined, grinding, trimming and finishing of the pre-cleaning, cleaning and inking cylinders, making the necessary templates, verifying the final quality and general condition of the rollers, completing the established documentation. For this purpose, you must prepare and operate the appropriate machines, as well as perform all the necessary operations for the finishing of rollers and cylinders according to the required conditions, being responsible for the correct quality and production.

Entertainment of the installation and the assigned machines, resolution of small faults, assembly of spare parts and cleaning of all its elements and area of action, assisting the staff of Maintenance whenever they are requires.

Staff training, solving all those doubts that may arise in the development of your work.

Filled out of printed and performing the required reports pertaining to your work.

Quality Technician.

It is the Technician who, with full knowledge of his profession, autonomy and responsibility and under the guidelines and supervision of his immediate superior, has as mission the study, development and application of quality controls of the products. It should develop quality assurance standards and procedures, both in production processes and in concerted quality with suppliers or customers and collaborating in its implementation, and the English language must be known. It will also carry out monitoring and evaluation of results, analysing deviations from the quality objectives and proposing solutions. For which you will perform the following functions:

Analysis of each of the processes of manufacturing, taking and processing of data on variables and attributes, rejection rate, etc., establishing the sampling plans necessary to obtain the distribution of defects and their causes, as well as studies on the variability and tolerances of the machines and the process, in order to establish the control systems.

Elaboration of the quality manuals in which the standards of concerted quality and the process are collected. Updating the quality program.

Training and advice on quality to the staff who require it, preparing manuals and presentations for this purpose. Detection of training needs in the field of quality.

Collaborates with its superior in the implementation of the rules and procedures.

Follow up on the implementation and evaluation of the indices and quality limits in both variables and attributes in order to correct the possible deviations. Handling customer claims.

Participation in setting goals and indicators and monitoring them.

informs its superior of the validity of the quality system once it has been proven, by means of established methods, that the operations are performed and recorded in accordance with the rules and procedures. Identification of the possibilities for improvement to adapt to changes in technology and new concepts of quality.

Collection of defects and preparation of catalogs of the same. Study of the technical instructions for the management of measuring instruments by drafting the rules for their use. Preparation of reports and studies of all kinds, on their field of competence.

Management of computer equipment as well as programs prepared for this purpose. Creation of machine vision machine programs.

Finished reviewer.

It is the operator who, with full knowledge of his profession, has as mission to check the perfect finish of the product in the phases of mechanical selection, automatic cutting and end of the process complying with the safety standards established and responsible for ensuring that production complies with the required quality standards. It shall carry out cash, supply and withdrawal of paper and auxiliary materials. For which you will perform the following functions:

Review by machine-accepted paper sampling and total review of the paper rejected by the same differentiating the correct one according to revision standards, defect catalogues and indications of its immediate superior. Destruction of the defective folds.

Square of paper by mechanical vibrator. Location in specification of qualitative and quantitative differences, carrying out the verification of manufacturing defects or quality by means of the 100 percent review system of their work, be it in the varieties of ojeo or total revision, according to the rules laid down and counting the product in a manual or mechanical manner. Drill down into those paper resmas that is needed, communicating to the Cortator's and Machinist's Team Chief of Finalized Equipment the anomalies it detects.

Changing templates based on the role class in the selection process and the check-in.

Paletized of resmas according to the requirements of the finished product.

Sourcing and removal of paper, auxiliary materials and consumables necessary for the development of their functions, handling existing auxiliary means.

Entertainment of the assigned machinery, replacement of auxiliary materials, spare parts and consumables, communicating to its immediate superior the possible incidents or breakdowns. Cleaning of the entire area of operation and machinery.

Collaboration with the Chief Team Machine on the functions assigned to it and replacing it with the rest of the breaks set in the day.

Filled out of established control forms, according to the rules specified for each product.