Having regard to the text of the minutes where the changes in the salary level and definitions of several professional categories are approved, as well as the creation of new ones, corresponding to the valuation of the first half of 2009 and Arbitration of the company National Factory of Currency and Timbre-Real Casa de la Moneda (Convention code No. 90002052011987) minutes which were signed on 21 June and 25 July 2012 by the Joint Commission of Valuation of which representatives of the Management of the Company and the Committee of Enterprise, representing the entity and the workers of the same, which is accompanied by favorable report issued by the Ministry of Finance and Public Administrations (Executive Commission of the Inter-Ministerial Commission of Remuneration), in compliance with the provisions of Law 2/2012, 29 of June, of the General Budget of the State for 2012 and in accordance with the provisions of the Article 90 (2) and (3) of the Staff Regulations Act, recast text approved by Royal Legislative Decree 1/1995 of 24 March, and Royal Decree 713/2010 of 28 May 2010 on the registration and deposit of agreements and agreements work collectives,

This Employment General Address resolves:

First.

Order the registration of these minutes in the corresponding Register of collective agreements and agreements working through electronic means of this Steering Center, with notification to the Commission Negotiator and with the warning to the same of the mandatory compliance of Law 2/2012, of June 29, of General State Budgets for 2012, in the execution of those Agreements.

Second.

Arrange your publication in the "Official State Bulletin".

Madrid, October 26, 2012. -Director General of Employment, Xavier Jean Braulio Thibault Aranda.

MINUTES THAT ARE QUOTED

FINAL ACT

Address Representatives:

Dona Azucena Boat Rodrigo.

Don Fernando Lobo of God (advisor).

Workers ' Representatives:

Don Antonio Santiago Morales.

Don Daniel Sierra Quiles (advisor).

In Madrid, on 21 June 2012, the members of the Joint Committee on Valuation are meeting, drawing up this final act, where the results of the assessment of the employment positions are collected. first half of 2009.

Posts valued or reviewed at the request of the departments

Posts that rise in level: Operational Staff: Official 2. Central Mechanics. Maintenance: 8.

Jobs not going up level: Operational Staff:

Head of Cycling and Pastas Preparation Team. Paper Factory: 9.

Multi-purpose Machine Assistant. Paper Factory: 8.

Reviewed posts by claim of their occupants

New creation posts: Technical staff: Engineering Technician and Ticket Productive Processes. Value Documents: 13.

Posts that do not go up level:

Staff with Command. Chief Administrative Officer of 1. Shopping: 11.

Administrative Staff: Official 1. Ceres: 10.

Operational Staff:

Officer 1. 3rd CAD Roller Manufacturing: 8.

Official 1. Calcography Roller Fabrication: 7.

Posts not valued for no change of functions

Head of Area D. Purchasing.

Chief of the Finalized Team, Paper Factory.

Production Auxiliary. Preprint.

The following job has not been valued for no agreement on whether or not the changes introduced in the same ones imply a review of the valuation of the same, as reflected in the daily minutes: Auxiliary Production (Encarted). Printing.

According to Article 9 of the current Collective Agreement, the positions of disagreement will be submitted to arbitration, agreeing that it is the Provincial Labour Inspectorate who will carry out the agreement, accepting both of them. representations of the report issued by the Inspectorate. These posts are: Production Auxiliary (Encarted). Printing.

Multiple

New build categories: Engineering Technician and Ticket Productive Processes.

Category that disappears: Inuse and Destruction Controller.

Posts that are integrated into categories included in the Convention: Studying the functions performed by the Head of Area D (level 12) of Foreign Trade in the Commercial Directorate, it has been proven that they are integrated into the category of Head of Area B (level 14).

Whose Valuation has been postponed: The assessment of the work of the Industrial Applications Analyst (level 12) of Ceres, when submitted to a judicial procedure, has been postponed until its resolution.

Person relationship and date of effect: It is made public internally in the FNMT-RCM's work centers, the relationship of the staff affected by the present review and the dates of application.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the "Official State Gazette" as an integral part of the Collective Agreement with effect of the dates of application. cited above.

Official 2. Central Mechanic: It is the operator who, with sufficient knowledge of his profession and following the guidelines of an Officer 1. or of a superior, performs preventive and corrective maintenance of machines, elements, Systems or installations, in their mechanical, hydraulic or pneumatic aspects, also handles any grinding machine, sharpening or polishing machine, and must prepare all the necessary materials and materials to carry out any finishing work surface and sharp, according to drawings, drawings or technical specifications or verbal instructions, taking responsibility for their correct quality and production and knowing the sense of technical texts in English. For which you will perform the following functions:

Resolution of all types of breakdowns previously diagnosed by personnel of higher category, mechanical, hydraulic or pneumatic in any of the machines, elements, systems or installations of departments or areas production or central workshops of the FNMT-RCM, with the help of the tools, tools and apparatus of measure of their profession and keeping the machine, element, system or installation out of service the time strictly necessary, being able to collaborate with operators of other specialties and/or personnel outside the FNMT-RCM.

Dismantling, cleaning, repairing, or replacing the broken-down element, including the rear mounting, setting, and setting.

Preparation of grinding, sharpening and polishing machines, finishing and surface finishing of all types of parts in any material, sharpening of any type of blade of manufacturing machines and cutting tools with its precise angles, following specifications or indications of a relevant profession, and the use of minting dies.

Performing preventive maintenance operations according to instructions or bulletins to be completed, warning of any special or systematic defects that you detect.

Choosing and requesting spare parts that you consider necessary on the basis of stock; building or adapting simple, useful parts and tools you may need in the development of your work by performing the sketches that necessary and using the machines and tools available to you, by carrying out the necessary self-controls.

Collaboration with Officer 1. in all its functions, being able to individually perform installations, modifications and reforms according to technical documentation, sketches and verbal information received, collaborating, also, with their superiors in completing, reviewing and updating the technical documentation, as well as in the verification of spare parts.

Maintenance, conservation, transport and cleaning of the various tools, materials and spare parts needed for the development of your work and cleaning up your area of action.

Completed the documentation necessary for the development of your required work.

Head of cycling and pasting equipment: It is the operator who, with full knowledge of his profession and capacity for coordination, has as his mission the preparation of pastes for the manufacture of paper. It shall carry out the preparation, programming and implementation of the process, attention to ancillary systems, including control and safety systems, composition and incorporation of additives and all necessary controls for the preparation of pasta of paper in accordance with the requirements of production. For which you will perform the following functions:

Preparation of paper pulp, coordinating the activities of the staff of the Pasta Preparation Facility, performing the processes of prerefining, refining and pulper, cycling, mixing and handling of the paste, checking the the optimum operation of the installation and making the necessary adjustments and the controls established for each point of the process and incorporating, as appropriate, the necessary additives, responsible for obtaining a correct quality and production.

A mixture of additives, dispersions and solutions, making the preparations of chemical products to be added to the paste, according to the recipes and class of paper to be manufactured, passing them, once prepared, to the monitoring of your immediate superior.

Performing measurements and color specifications through the tests established in the Laboratory, using the available auxiliary machinery and carrying out the control check by visual comparison of each cycled from the previous one, warning your immediate superior of any incident.

Coastal paper recycling for paper pulp, checking for type of fibrils and type of wet strength, addition of soda or sulphuric acid, monitoring and correcting the pH of the coastal, pear and discharge of the pulper, and regulation of Consistency and unpastillading of the paste. Collection of samples and introduction of corrections in the process panel.

Stock control and change and replacement of additives, as needed.

Entertainment of the machines, resolution of minor breakdowns or interference and cleaning of all its elements and area of action, assisting the maintenance staff in their repairs, whenever required.

Completing the forms required for your job.

Multi-purpose machine helper: It is the operator who, with sufficient knowledge of the papermaking process, and under the supervision of the assigned machinist, assists the latter in all its tasks. You must perform the functions of the Help categories of the Pasta Preparation Facility, Encolado Assistant, and Calandra Paper Machine and End Corter Assistant.

Engineering Technician and Productive Banknote Processes: It is the top or assimilated title that, with full knowledge of its profession, initiative and responsibility, has its mission to collaborate in the complete development of projects under the coordination of the Director of your Department or other superior, or to work autonomously in specific tasks and specific projects of your Department. Coordinate the works of the engineering area where it is destined with the rest of the areas of its department or other of the FNMT-RCM, it will have to meet the demands of formative or technical assistance that are produced. For which you will perform the following functions:

Collaboration in the development of projects, whether they are new implementation or modification of existing ones, in any field related to products, processes and installations, or relating to the application of new technologies or concepts.

Full development of specific projects of your Department, supervision of third-party projects, and performance of tasks and work of your specialty.

Coordination of the works of the engineering area of your department with the rest of the FNMT-RCM areas and external companies, as well as the programming, monitoring and control of the engineering works.

Participation or development of how many analyses and studies are carried out on productivity improvements, working methods, offers, facilities, machinery, etc.

Tailoring and drafting of technical documentation, specifications, technical specifications, manufacturing and maintenance manuals, etc.

FINAL ACT

Address Representatives:

Dona Azucena Boat Rodrigo.

Don Fernando Lobo of God (advisor).

Workers ' Representatives:

Don Antonio Santiago Morales.

Don Daniel Sierra Quiles (advisor).

In Madrid, on July 25, 2012, the members of the Joint Commission of Valuation are met, preparing this final act, where the result of the evaluation of the job corresponding to the first one is collected. 2009 semester, which was submitted to the Provincial Labour Inspectorate.

Post not valued for no change of functions

Production Auxiliary (Encarted). Printing.