Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("BOE" No. 32, of 6 February 1996) and having regard to the case of annulment of the rules submitted by the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, with Royal Decree 1614/1985 of 1 August, and recognised by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE annulled during the month of October 2012, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, November 19, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Rules cancelled in October 2012
Title | |
---|---|
20060-3:1990 |
Portable hand tools powered by electric motor. Particular safety conditions. Sections H to N. |
UNE 20060-3/2M: 1995 | Electrical powered hand tools powered by electric motor. Part 3: particular safety conditions. Section M: Brushes |
53356:2002 | Plastics and elastomers. Polymer dispersions. Determination of non-volatile matter (residue) at a specified temperature |
53537:1981 | Elastomers. Determining the elastomers resilencyerzley. |
53537:1982 ERRATUM | Elastomers. Determining the elastomers resiliency. |
53562:1974 | Elastomers. Determination of the chloroformic extract of elastomers |
53563:1974 | Elastomers. Determination of the alcoholic potash extract of elastomers |
53578:1974 | Elastomers. Determination of the remaining compression strain under constant load |
53585:1974 | Elastomers. Microporous rubber plates for soles, features and test methods |
UNE-EN 544:2006 | Bituminous plants with mineral armor and/or synthetic. Product specification and test methods |
UNE-EN 1012-1:1996 | Compressors and vacuum pumps. Security requirements. Part 1: Compressors. |
UNE-EN 50144-1:1996 | Security of portable hand tools powered by electric motor. Part 1: General requirements |
UNE-EN 50144-2-13:2003 | Security of the portable hand tools powered by electric motor. Part 2-13: Particular requirements for chain saws |
UNE-EN 60079-18:2005 | Electrical equipment for explosive gas atmospheres. Part 18: Construction, testing and marking of protection mode electrical equipment by encapsulation "m". |
UNE-EN 60079-18:2005 CORR: 2006 | Electrical Material for Explosive Gas Atmospheres. Part 18: Construction, testing and marking of protection mode electrical equipment by encapsulation "m". |
UNE-EN 60644:1995 | Specifications for high voltage fuse cartridges intended for motor circuits |
UNE-EN 60923/A1:2002 | Auxiliary lamps for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Operating prescriptions |
UNE-EN 60923:1997 | Auxiliary lamps for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Operating prescriptions |
UNE-EN 61241-1:2005 | Electrical equipment for use in the presence of flammable powder. Part 1: "tD" envelope protection |
UNE-EN 61241-1:2005 CORR: 2007 | Electrical equipment for use in the presence of flammable powder. Part 1: "tD" envelope protection |
UNE-EN 61241-18:2006 | Electrical equipment for use in the presence of flammable powder. Part 18: Protection by encapsulation "mD". |
UNE-EN 61558-2-17:1999 | Security of transformers, power units, and analogues. Part 2-17: Particular requirements for transformers for power supplies in switched mode |
UNE-EN ISO 3758:2005 ERRATUM: 2009 | Textiles. Code for conservation labeling by means of symbols (ISO 3758:2005) |
-ISO 21930:2010 | Sustainability in construction buildings. Environmental statement of construction products |