Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("BOE" No. 32, of 6 February 1996) and in view of the standards developed by the European Standardisation Bodies, CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification (AENOR), an entity designated by Order of the Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognized for this purpose by the first provision of the said Royal Decree 2200/1995 of 28 December 1995.
Having regard to the procedure for the elaboration of European standards, in accordance with paragraph 11.2.6.4 of the common rules of CEN/CENELEC and 13.7 of the rules of procedure of ETSI, for the standardisation work of the aforementioned European bodies.
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards to which the Spanish standard range has been granted during the month of February 2013, identified by its title and code numerical, indicating their date of availability, which are listed as an annex to this resolution.
Madrid, March 6, 2013. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Ratification of European rules. February 2013
Title | F. Availb. | Anula | |
---|---|---|---|
CEN ISO/TR 27165:2012 | Pipeline systems in thermoplastic materials- Guidelines for the definition of the construction type of pipe walls (ISO/TR 27165:2012). | 2012-10-15 |
|
CEN ISO/TS 16491:2012 | Guidelines for the assessment of the uncertainty in the measurement of the cold and heat power testing of air conditioners and heat pumps (ISO/TS 16491:2012). | 2012-12-01 |
|
2267-009:2013 | Aerospace. Electrical cables, for general use. Operating temperatures between -55 ° C and 260 ° C. Part 009: DRA family, single-conductor and multi-conductor assemblies. Product Standard. | 2013-01-09 | EN 2267-009:2005 |
3528:2013 | Aerospace Material. Steel X2NiCoMo18-8-5 (1,6359). Cast by induction in vacuum and recused by arc in vacuum. Treated in solution and precipitation. Bars-to or D ≤ 150 mm-1 750 MPa ≤ Rm≤ 2 000 MPa | 2013-01-09 |
|
3660-025:2013 | Aerospace. Power outlet cable accessories for circular and rectangular, electrical and optical connectors. Part 025: Cable current, A-style, straight, non-watertight with cable-fixing system to avoid mechanical stresses for EN 3646. Product Standard. | 2013-01-09 | EN 3660-025:2009 |
3660-027:2013 | Aerospace Material. Power outlet cable accessories for circular and rectangular, electrical and optical connectors. Part 027: Cable current, A-style, 45º, non-watertight, with cable-fixing system to avoid mechanical stresses for EN 3646. Product Standard. | 2013-01-09 | EN 3660-027:2009 |
3660-038:2013 | Aerospace Material. Power outlet cable accessories for circular and rectangular, electrical and optical connectors. Part 038: Manual installation tool, Z-style, for the installation of the stainless steel band EN 3660-033, for electrical outlet cable accessories. Product Standard. | 2013-01-09 |
|
3682-005:2013 | Aerospace Material. Electrical connectors, plug and receptacle, rectangular, interchangeable type inserts, stackable in panel, operating temperature of 150 ° C. Part 005: Size 2 Clavija. Product Standard. | 2013-01-09 |
|
3682-006:2013 | Aerospace. Electrical connectors, plug and receptacle, rectangular, interchangeable type inserts, stackable in panel, operating temperature of 150 ° C. Part 006: Size 3 receptacle. Product Standard. | 2013-01-09 | EN 3682-006:2006 |
3682-007:2013 | Aerospace Material. Electrical connectors, plug and receptacle, rectangular, interchangeable type inserts, stackable in panel, operating temperature of 150 ° C. Part 007: Size 3 Clavija. Product Standard. | 2013-01-09 | EN 3682-007:2006 |
3682-008:2013 | Aerospace Material. Electrical connectors, plug and receptacle, rectangular, interchangeable type inserts, stackable in panel, operating temperature of 150 ° C. Part 008: Size 4 receptacle. Product Standard. | 2013-01-09 | EN 3682-006:2006 |
3682-009:2013 | Aerospace Material. Electrical connectors, plug and receptacle, rectangular, interchangeable type inserts, stackable in panel, operating temperature of 150 ° C. Part 009: Size 4 Clavija. Product Standard. | 2013-01-09 | EN 3682-009:2006 |
4265:2013 | Aerospace Material. Flat spherical bearings, metal to metal, in corrosion resistant steel. Wide series. Dimensions and loads. Series in inches. | 2013-01-09 |
|
4594:2013 | Aerospace Material. Paints and varnishes. Two-component cold-hardened polyurethane finish. Resistance to supersonic erosion. | 2013-01-09 |
|
4595:2013 |
Aerospace material. Paints and varnishes. Cold-hardened two-component polyurethane finish. Resistance to subsonic erosion. | 2013-01-09 |
|
6049-008:2013 |
Aerospace material. Electrical cables, installation. Protective sheath in meta-aramides fibers. Part 008: Self-enveloping protective shield (EMI) with nickel-plated copper braided, flexible after installation, operating temperatures from-55 ° C to 200 ° C. Product Standard. | 2013-01-09 |
|
13321-2:2012 | Open data communication in automation, control, and building management. Electronic systems for housing and buildings. Part 2: KNX/IP Communication. | 2012-12-12 | EN 13321-2:2006 |
14706:2012 |
Thermal insulating products for building equipment and industrial installations. Determining the maximum service temperature. | 2012-10-17 | EN 14706:2005 |
14707:2012 | Thermal insulating products for building equipment and industrial installations. Determining the maximum service temperature for pre-formed insulating nozzles. | 2012-10-17 | EN 14707:2005 + A1:2007 |
EN 50341-1:2012 | Air lines of more than 1 kV on alternating current. Part 1: General requirements. Common specifications. | 2012-12-21 |
|
60794-4-20:2012 | Cables. Part 4-20: Air optical cables installed along power lines. Family specification for ADDS optical cables. | 2012-12-14 |
|
61280-2-2:2012 | Test procedures for optical fiber communication subsystems. Part 2-2: Digital systems. Measurement of the eye diagram, waveform, and extinction rate. | 2012-12-14 |
|
EN 61747-4:2012 | Liquid Crystal Display Devices. Part 4: Modules and cells for the display of liquid crystals. Limit values and essential characteristics. | 2012-12-14 |
|
62358:2012 |
Ferrite Cores. Normalized inductance factor for cores with gaps and their tolerances. | 2012-12-21 |
|
62674-1:2012 | High-frequency inductive components. Part 1: Fixed surface mounted Inductors for use in electronics and telecommunications equipment. | 2012-12-21 |
|
EN ISO 284:2012 | Transporters. Electrical conductivity. Specification and test method (ISO 284:2012). | 2012-12-01 | UNE-EN ISO 284:2004 |
ISO 1927-5:2012 | Monolithic Refractory Products (not Conformed). Part 5: Preparing and treating specimens (ISO 1927-5:2012). | 2012-12-01 | UNE-EN 1402-5:2004 |
ISO 1927-6:2012 | monolithic refractory products (not conformed). Part 6: Measurement of physical properties (ISO 1927-6:2012). | 2012-12-01 | UNE-EN 1402-6:2004 |
ISO 1927-7:2012 | monolithic refractory products (not conformed). Part 7: Test of pre-formed parts. (ISO 1927-7:2012) | 2012-12-01 | UNE-EN 1402-7:2004 |
ISO 1927-8:2012 | Monolithic Refractory Products (not conformed). Part 8: Determination of complementary properties. (ISO 1927-8:2012) | 2012-12-01 | UNE-EN 1402-8:2004 |
ISO 10628-2:2012 |
Diagrams for the chemical and petrochemical industry. Part 2: Graphics symbols (ISO 10628-2:2012). | 2012-12-01 | UNE-EN ISO 10628:2001 |
ISO 11148-3:2012 | Portable non-electric drive tools. Security requirements. Part 3: Taladrators and Terriers (ISO 11148-3:2012). | 2012-12-19 | EN ISO 11148-3:2010 |
ISO 11148-4:2012 | Portable non-electric drive tools. Security requirements. Part 4: Non-rotating percutaneous portable tools (ISO 11148-4:2012). | 2012-12-19 | EN ISO 11148-4:2010 |
ISO 11148-6:2012 | Portable non-electric drive tools. Security requirements. Part 6: Tools for placing threaded fasteners (ISO 11148-6:2012). | 2012-12-19 | EN ISO 11148-6:2010 |
ISO 11269-1:2012 | Soil Quality. Determination of the effects of contaminants on soil flora. Part 1: Method for the measurement of root growth inhibition (ISO 11269-1:2012). | 2012-12-12 | UNE 77301-1:1996 |
EN ISO 13705:2012 | Oil, petrochemical and natural gas industries. Heaters for general use in refineries (ISO 13705:2012). | 2012-12-19 | EN ISO 13705:2006 |
ISO 15147:2012 | Light Conveyor Belts. Tolerances on widths and lengths of the light conveyor belts of cut edges. (ISO 15147:2012). | 2012-12-01 | UNE-EN ISO 15147:2000 |
ISO 15535:2012 |
General requirements for the establishment of anthropometric databases (ISO 15535:2012). | 2012-10-01 | UNE-EN ISO 15535:2007 |
ISO 27509:2012 | Oil and Natural Gas Industries. Compact flanges with close ring IX (ISO 27509:2012). | 2012-12-19 |
|