Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995, ("Official State Gazette" No. 32, of 6 February 1996) and having regard to the case of annulment of the rules submitted by the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, with Royal Decree 1614/1985 of 1 August, and recognised by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE annulled during the month of October 2013, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, 13 November 2013. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Rules cancelled in October 2013
Title | |
---|---|
60812:2006 | Systems Reliability Analysis Techniques. Procedure for the analysis of the mode of failure and its effects (AMFE). (IEC 60812:2006). (Ratified by AENOR in May 2007) |
62308:2006 | Equipment reliability. Methods of assessment of reliability. (IEC 62308:2006). (Ratified by AENOR in May 2007) |
HD 60269-2:2007 | Low voltage fuses. Part 2: Supplementary rules for fuses intended for use by authorised persons (fuses for mainly industrial uses). Examples of standard Fuses A to I systems (IEC 60269-2:2006, as amended). (Ratified by AENOR in December 2007) |
1123:1984 | Micrography. Transparent microfiche of uniform division A6 format. Images provisions number 1 and number 2 |
1124:1984 | Micrography. Transparent microfiche of variable division A6 format. Images A and B. |
UNE 1127:1984 | Document playback. ISO conventional typographical character for readability tests. (ISO character) |
34070-1:1973 | Fruit Nomenclature |
50104:1994 | bibliographic references. Content, form, and structure |
50127:1994 | Documentation. Bibliographic identification (bibliography) of articles in series publications and books |
50135:1996 | Documentation. Presentation of scientific and technical reports |
53486:1992 | Plastics. Corrugated tubes and accessories of poly (vinyl chloride) not plasticised for agricultural drainage. Test features and methods |
UNE-EN 50086-1 CORR: 2001 | Tube systems for cable management. Part 1: General requirements |
UNE-EN 50086-1:1995 | Pipe systems for cable management. Part 1: General requirements |
UNE-EN 50086-1:1995 ERRATUM: 2010 | Cable-driving pipe systems. Part 1: General requirements |
UNE-EN 50086-2-4 CORR: 2001 | Pipe systems for cable management. Part 2-4: Particular requirements for buried pipe systems |
UNE-EN 50086-2-4/A1:2001 | Tube systems for cable management. Part 2-4: Particular requirements for buried pipe systems |
UNE-EN 50086-2-4:1995 | Tube systems for cable management. Part 2-4: particular requirements for buried pipe systems |
UNE-EN 50122-2 CORR: 2002 | Railway applications. Fixed installations. Part 2: Protective measures against the effects of stray currents produced by the continuous-current traction systems |
UNE-EN 50122-2/A1:2002 | Railway Applications. Fixed installations. Part 2: Protective measures against the effects of stray currents produced by the continuous-current traction systems |
UNE-EN 50122-2:1999 | Railway Applications. Fixed installations. Part 2: Protective measures against the effects of stray currents produced by the continuous-current traction systems |
UNE-EN 50122-2:2000 ERRATUM |
Railway applications. Fixed installations. Part 2: Protective measures against the effects of stray currents produced by the continuous-current traction systems |
UNE-EN 50144-2-16:2004 | Security of the portable manual tools powered by electric motor. Part 2-16: Particular requirements for divers |
UNE-EN 50191:2002 | Installing and operating electrical test equipment. |
UNE-EN 50310:2007 | Applying the equipotential and grounding in buildings with information technology equipment. |
UNE-EN 50386:2003 | Passports for transformers immersed in insulating liquid up to 1 kV and 250 A to 5 kA. |
UNE-EN 60034-1:2005 | Rotating Electrical Machines. Part 1: Assigned features and operating features |
UNE-EN 60269-2/A1:1999 | Low voltage fuses. Part 2: Supplementary rules for fuses intended for use by authorized persons (fuses for primarily industrial uses) |
UNE-EN 60269-2/A2:2002 |
Low voltage fuses. Part 2: Supplementary rules for fuses intended to be used by authorized persons (fuses for primarily industrial uses) |
UNE-EN 60269-2:1996 CORR: 2005 | Low voltage fuses. Part 2: Supplementary rules for fuses intended for use by authorized persons (fuses for primarily industrial uses) |
UNE-EN 60335-2-54:2005 |
Appliances and analogues. Security. Part 2-54: Particular requirements for household surface cleaning appliances using liquids or steam |
UNE-EN 60335-2-54:2005/A11:2006 | Appliances and Analog Appliances. Security. Part 2-54: Particular requirements for household surface cleaning appliances using liquids or steam |
UNE-EN 60335-2-54:2005/A1:2005 | Appliances and Analog Appliances. Security. Part 2-54: Particular requirements for household surface cleaning appliances using liquids or steam |
UNE-EN 60335-2-54:2005/A2:2008 | Appliances and Analog Appliances. Security. Part 2-54: Particular requirements for household surface cleaning appliances using liquids or steam |
UNE-EN 60728-11:2005 | Cable distribution networks for television signals, sound signals, and interactive services. Part 11: Security requirements |
UNE-EN 60730-2-7 CORR: 1999 | Automatic electric control devices for domestic and analog use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A1 CORR: 2001 | Control devices automatic electric for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A11 CORR: 2001 | Control devices automatic electric for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A11:1996 | Control devices automatic electric for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A1:1998 | Electrical Control Devices automatic for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A12 CORR: 2001 | Control devices automatic electric for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A12:1996 | Control devices automatic electric for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7/A13:2003 | Control devices automatic electric for domestic and analogue use. Part 2-7: Particular requirements for timers and timed switches |
UNE-EN 60730-2-7:1994 | Electrical Control Devices automatic for domestic and analogue use. Part 2: particular requirements for timers and timed switches. (Official Version EN 60730-2-7:1991) |
UNE-EN 60730-2-7:1994/A14:2005 | Automatic electrical control devices for domestic and analogue use. Part 2: Particular requirements for timers and timed switches |
UNE-EN 60745-2-5:2007 | Electrical manual tools powered by electric motor. Security. Part 2-5: Particular requirements for circular saws. (IEC 60745-2-5:2006). |
UNE-EN 60745-2-5:2007/A11:2010 | Electrical manual tools powered by electric motor. Security. Part 2-5: Particular requirements for circular saws |
UNE-EN 60974-11:2005 | Safety rules for electrical welding equipment. Part 11: Port-electrodes. |
UNE-EN 61000-4-20:2004 | Electromagnetic Compatibility (CEM). Part 4-20: Test and measurement techniques. Emission and immunity tests in the transverse electromagnetic waveguides (TEM) |
UNE-EN 61000-4-20:2004/A1:2007 | Compatibility electromagnetic (EMF). Part 4-20: Test and measurement techniques. Emission and immunity tests in the transverse electromagnetic waveguides (TEM). (IEC 61000-4-20:2003/A1:2006). |
UNE-EN 61010-1 CORR: 2003 | Safety requirements for measurement, control, and laboratory electrical equipment. Part 1: General requirements |
UNE-EN 61010-1:2002 | Safety requirements for measurement, control, and laboratory electrical equipment. Part 1: General requirements |
Security of transformers, power units, and analogues. Part 2-23: Particular requirements for transformers for works | |
UNE-ISO/TR 20983:2006 IN | Information and documentation. Indicators for Electronic Library Services. (ISO/TR 20983:2003) |