Having regard to the text of the final act approving the changes in the salary level and definitions of several professional categories, as well as the creation of new ones, forming part of the Sixth Collective Agreement of the Factory National de Moneda y Timbre (Convention code number 9002052), which was signed dated 28 February 1994, by the Joint Committee on Valuation, on behalf of the business and working parties, to which a favourable report is attached by the Ministries of Economic and Financial Affairs and Public Administrations (Executive Committee of the The Inter-Ministerial Commission on Remuneration) in compliance with the provisions of Law 41/1994 of 30 December 1994 on the General Budget of the State for 1995, and in accordance with the provisions of Article 90 (2) and (3) of the Royal Decree Legislative 1/1995, of 24 March, approving the recast of the Law of the Workers ' Statute and Royal Decree 1040/1981 of 22 May on the registration and deposit of collective labour agreements,

This Work General Address agrees:

First. -Order the registration of the said act in the corresponding Register of this management center, with notification to the Joint Commission of Valuation, with the warning to the same of the obligatory compliance of Law 41/1994, Council Regulation (EC) No 430/95 of 30 December 1995 on the general budget of the State for 1995.

Second. -Dispose your publication in the "Official State Bulletin".

Madrid, June 13, 1995. -Director General, Soledad Cordova Garrido.

FINAL ACT

In Madrid on 28 February 1994, the members of the Joint Committee of the Valuation mentioned below are meeting, drawing up the present report, which sets out the results of the assessment of those jobs. for the second half of 1993.

Address Representatives: Don Alvaro Santamaria Enebral and Don Carlos R. Larrea Cruces (adviser).

Workers ' representatives: Don Emilio Aguilera Diaz and Dona Elena R. Santamaria Hernandez (adviser).

New Create Posts

Technical staff:

ECA monitor (level 8).

Operating Personnel

Laser machine-bag (level 7).

PVC card custom operation (level 7).

PVC card manufacturing operation (level 7).

PVC card completion operation (level 7).

Reviewed posts that go up level

Operating staff:

First offset machine officer to a color (level 7).

Head of Machine Equipment for cutting and cooling equipment (level 8).

Reviewed posts that do not suffer level variation

Technical staff:

Production Computer Operator (Lotteries) (level 7).

Posts that are submitted to the DGT arbitration

In view of the disagreement in the posts listed below, this Commission submits its assessment to the arbitration of the Directorate-General for Labour:

Official First Team Chief Photographer-Retoilette.

First Official Photographic Retoiletry.

Change Control Production Reviewer and Manipulated Returns (Timbre).

Reviewed posts by claim of their occupants

Operating staff:

Counter Reviewer (Lotteries) (level 5).

Also, there is no agreement on the valuation of the posts corresponding to the following claims:

Purchasing Manager (General Purchasing).

Purchasing Manager (Purchasing Production).

First Administrative Officer (Laboratory and Quality).

Store Administrative (Paper Factory).

First Officer of Tels.

Second Officer of Tels.

First Officer Chief of Cylinder Engraving Equipment.

First Official of Cylinder Engraving.

Second Officer of Cylinder Engraving.

Mechanical Driver.

Multiple Topics

New build categories:

ECA monitor (level 8).

Laser machine-bag (level 7).

PVC card custom operation (level 7).

PVC card manufacturing operation (level 7).

PVC card completion operation (level 7).

Head of Machine Equipment for cutting and cooling equipment (level 8).

Categories that disappear:

Machine machine for cutting and cooling (level 7).

The relationship of the staff affected by this review and the dates of application provided by the Departments of the Departments is attached.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the "Official State Gazette" as an integral part of the Collective Agreement and with the effect of the dates of application. cited above.

Production Computer Operator. -It is the technician who, with basic knowledge of their profession, of the existing equipment, and following the guidelines of the immediate superior, has as mission the use of the applications and programs that it has, of treatment, classification and archiving, in adequate support, of the necessary information for the production in industrial printers. For which you will perform the following functions:

Commissioning and stopping the equipment according to the established sequences, introducing the necessary commands and checking the status of the different units, peripherals and available memory.

Loading the necessary applications and programs, using local or PC operating system commands, mounting the corresponding tapes or diskettes on the read units, checking their protections.

Execution of the works entrusted by the management of the equipment, applications and programs that has at its disposal, verifying its perfect operation, attention to the calls and messages of the system and correction of the errors that originate during the processes. Generation, file, erasure and/or modification of the corresponding files, realization of the required backups and launch of lists, contrasting them with the documentation submitted, being responsible for the correct realization of the work entrusted.

Reception, control, classification, labelling and archiving of the various media and documentation used, completing the documents and printed documents required in relation to your work.

Updating the databases required for the generation of listings and tags, by entering, replacing, and modifying the contained records.

Generation of faulty effects listings from other tasks: Selection of the application, entering the corresponding data and launching of listings for later verification with the documentation delivered.

Resolution of the doubts that the operators of the industrial printers have in the management of their computer consoles.

Supply and replacement of all kinds of materials necessary for your work, periodic cleaning and grease of the mechanical elements, collaborating whenever required with the personnel entrusted to you maintenance.

Supervisor ECA. -It is the technician who, with full knowledge of his profession, initiative and responsibility, has as mission the supervision and control of the Central Station of Alarms. You will need to monitor and control breakdowns in the comprehensive security system, security administrative controls, and all reports required by your superiors, related to your work. For which you will perform the following functions:

Regular verification of the system for the monitoring and control of the breakdown of the integral security system, keeping its superiors informed about any incidence produced in the equipment and elements, following their instructions on the holding of the ECA.

Administrative control of FNMT staff access cards, visitors and vehicles, as well as billing by the Surveillance Services, for which you complete and manage the necessary documentation.

Use of computer terminal and personal computer, as well as programs prepared for the effect for the introduction, obtaining or modification of data, confection of reports, etc.

Attention to the personnel entrusted with the maintenance of the integral security system, collaborating for the maintenance and repair of breakdowns.

Chief Machine Officer of the Court and Enfajado. -It is the operator that, with full knowledge of the machine leads an automatic guillotine-enfajadora for all kinds of effects, as well as any conventional guillotine. It must carry out the programming and development of machinery and all ancillary systems, including control and safety systems, in order to be able to cut and cool any type of work, in accordance with the requirements of the finished product. For which you will perform the following functions:

Preparation and programming of the machine, paper and auxiliary materials according to the established order in case of being numbered, introducing the necessary changes and/or control sheets, solving the interferences produce and are responsible for obtaining a correct quality and production.

Supply, preparation and removal of paper while maintaining the required order of the various effects, postets or cut.

Realization of the necessary adjustments of pressure, cutting bodies, transport, cooling, in changes of blades and format.

Performing quality controls in accordance with established guidelines, completing the required documents and control forms in relation to your work.

Coordination of the production mirrors which, according to the work, are intended for the exit of the machine and must replace them, if necessary, during the rest periods established during the working day work.

Entertainment of the machines and cleaning of all its elements and area of action, resolution of small breakdowns, replacement and assembly of spare parts, assisting the staff of Maintenance, whenever required.

First offset machine officer to a color. -It is the operator who, with full knowledge of his profession, can handle any offset machine to a color, having to make the necessary preparations and adjustments of all his/her elements, in order to print any type of job in offset to a color, according to the requirements of the finished product. For which you will perform the following functions:

Supply of paper, preparation and adjustment of the machine, mixing of colours, assembly and adjustment of plates, rubbers, numerals, treps, tinteros and other necessary elements, as well as auxiliary systems, including those of control and security, taking responsibility for the circulation and making the necessary corrections to obtain a correct quality and production.

Extraction and qualitative and quantitative verification of the product and withdrawal of the defective effects, introducing the repositions and completion of the required forms related to their work.

Coordinating the Reviewer in the jobs that require it.

Realization of work and cleaning of all machine elements and their area of action, as well as the entertainment of the machine, resolution of small breakdowns and assembly of spare parts, helping the staff Maintenance on repairs, whenever required.

Laser machine-bag machine. -It is the operator who, with full knowledge of the equipment in charge, has as mission the laser engraving and bagging of cards. It shall carry out the preparation, commissioning and attention of equipment and ancillary systems, including control and safety systems, by making the necessary corrections to obtain the product in accordance with the conditions required. For which you will perform the following functions:

Preparation and commissioning of the equipment according to the established guidelines, introduction of the necessary data, as well as the adjustment and positioning of the mechanical elements.

Supply of materials, power and attention to the operation of equipment, solving calls and interference that occur in different phases, packaged and packaged, according to the conditions required, being responsible for correct quality and production.

Realization of established quality controls, file, classification and card identification, completing the documents required in relation to your work.

Entertainment of the teams in charge and regular cleaning of the same and area of action, collaborating with the staff who have entrusted their maintenance, whenever required.

PVC card custom operator. -It is the operator who, with full knowledge of the assigned equipment, has as mission the digitisation of images and load of information for the custom of PVC cards. It shall carry out the preparation and commissioning of the equipment, carrying out the precise corrections and attention to its operation, as well as to the auxiliary systems, including control and safety systems, for obtaining the product the conditions required. For which you will perform the following functions:

Preparation and commissioning of the equipment according to the established guidelines, carrying out the necessary checks. Supply and replenishment of raw materials and auxiliaries.

Dump and load data from the various media, digitalization and custom of cards, taking care of the operation of the equipment, solving the system calls and interferences that occur, being the responsible for obtaining correct quality and production.

Withdrawal and qualitative and quantitative verification of the product, completing the documents and control forms required in relation to your work.

Entertainment and periodic cleaning of the equipment and area of action, collaborating with the staff who are entrusted with their maintenance whenever required.

PVC card manufacturing operation. -It is the operator who, with full knowledge of the assigned equipment, has as mission the manufacture of PVC cards. It shall carry out the preparation of the machinery, necessary adjustments, attention to ancillary systems, including control and safety systems, as well as all precise operations in order to obtain the product, in accordance with the conditions required. For which you will perform the following functions:

Sourcing of raw materials and auxiliaries. Preparation, commissioning and feeding of the equipment in charge, corresponding to the manufacturing process, resolution of interference and attention to the system calls that occur.

PVC pliings, coating plastic and seat paper in a guillotine machine to the required measurements.

Magnetic band, laminate, die-cut and hologram placement and/or signature panel.

Extraction and verification of production, completing the documents and control forms required in relation to your work, being responsible for obtaining a correct quality and production.

Realization of machine entertainment, small breakdown resolution, replacement assembly, change and blade adjustment, as well as cleaning of the same and its performance area, collaborating with the staff of Maintenance on repairs, whenever required.

PVC card finish operation. -It is the operator who, with full knowledge of the assigned equipment, has as mission the completion of PVC cards. It shall carry out the preparation of the machinery, necessary adjustments, attention to ancillary systems, including control and safety systems, as well as all precise operations in order to obtain the product in accordance with the conditions required. For which you will perform the following functions:

Sourcing of raw and auxiliary materials, preparation, commissioning and feeding of the equipment in charge, corresponding to the process of completion, resolution of interference and attention to the system calls to be produced.

Customization of cards by bagging and paper support for shipping, inserted and enveloping of cards.

Extraction and qualitative and quantitative verification of the product, completing the documents and control forms required in relation to your work, being responsible for the correct quality and production.

Realization of the entertainment of the machines, resolution of small faults, assembly of spare parts, as well as the cleaning of the same and its area of action, collaborating with the staff of Maintenance in the repairs, always that is required.