Having regard to the text of the act approving the changes in the salary level and definitions of several professional categories of the Collective Convention of the National Mint and Timbre (code number 9002052) signed on 19 July 1995 by the members of the Joint Committee on the Valuation of the abovementioned Convention, accompanied by the favourable report issued by the Ministries of Economic and Financial Affairs and Public Administrations (Commission Executive of the Inter-Ministerial Commission on Remuneration), in compliance with the provisions of the Law 41/1994, of 30 December, of the General Budget of the State for 1995, and in accordance with the provisions of Article 90 (2) and (3) of the Royal Legislative Decree 1/1995 of 24 March, approving the recast of the Law of the Staff Regulations, and in Royal Decree 1040/1981 of 22 May on the registration and deposit of collective labour

,

This Work General Address agrees:

First. -Order the registration of the said minutes in the corresponding Register of this management center, with notification to the Negotiating Commission.

Second. -Dispose your publication in the "Official State Bulletin".

Madrid, November 21, 1995. -Director General, Soledad Cordova Garrido.

FINAL ACT

In Madrid on 19 July 1995, the members of the Joint Committee on Valuation are meeting, drawing up the present report, which sets out the results of the assessment of those posts in the First half of 1994.

Address Representatives:

Don Alvaro Santamaria Enebral.

Don Carlos R. Larrea Cruces (advisor).

Workers ' representatives:

Don Emilio Aguilera Diaz.

Don Marcelo Renimímos Simarro (advisor)

Level

New Create Posts

Technical Staff:

Chromatography Technician/10

Spectrometry/10 Technician

Operational Staff:

First Minerva Official-Typography-Offset to a Color/8

First Mechanical Engraving Officer-CAD/9

End-of-End/8-Cutters Machine

Finished/6 Cutters Helper

Reviewed posts that do not go up level

Technical Staff:

Security Projects Technician/11

Second/5 Delineant

Reviewed posts to be submitted to the General Labour Directorate's arbitration

In view of the disagreement in the posts listed below, this Commission submits its assessment to the arbitration of the Directorate-General for Labour:

Museum Store Manager.

Translator first.

Smart Card Machine.

Inuse Control (Value Documents).

Texel's Machinist.

Currency Counter-Counter Machine.

Reviewed posts by claim of their occupants

Level

Technical Staff:

Originator Projectionist/11

Quality/9 Technicians

DNI/9 Operator-Progator

Operational Staff:

First Officer Head of Hincado and Pullide Equipment/8

First Caught And Polished/7 Officer

Official Second Selection Machine and Ticket Numbered/5

Passport Manufacturing Assistant/7

Review-Passport Numerator/7

First Guillotinero Officer/7

Also, there is no agreement on the valuation of the posts corresponding to the following claims:

Revisory Calcograph Manipulator.

Rev. of Produc. and Control of Changes and Returns of Cut-Pak I.

Document Customization Manipulator.

Passport Manufacturing Machinist.

Tintas First Refining and Recovery Officer.

Calcography Debugger Plant Machinist.

First Roller Funder Officer.

Multiple Topics

New build categories:

Technician in Cromatography (level 10).

Spectrometry Technician (level 10).

First Minerva Official-Typography-Offset to a color (level 8).

First Recorded Mechanical-CAD Officer (level 9).

End-of-the-end (level 8) Corter machines.

Finished Corter Assistant (level 6).

Categories that disappear:

Laboratory Process Technician.

Security and Safety Project Technician by Security Project Technician.

First Chief of the Carpall Team or First Chief of the Ebanista Team.

First Officer Carpor or First Ebanista Officer.

Official second Carpall or by Officer second Ebanista.

It is agreed, due to the similarity of functions, to frame the new creation positions of the Card Project Engineer and the Auxiliary Card Project Engineer (both Commercial) within the professional categories of Project Engineer (level 14) and Project Auxiliary Engineer (level 12), respectively.

It is agreed, due to the similarity of functions, to frame the position of new creation of Automatic Manipulated of Value Documents within the professional category of Assistant to the Administrative Workshop (level 6), so that proposes to the Joint Commission the reclassification of Don Manuel Ruiz Aznal -7142-to the latter professional category.

On the basis of the agreement of the Joint Commission of 2 June 1994, the names of the professional categories of: First Chief of Team Carpio or, First Officer Carpor and Official Second Carpor, or, going to be the First Chief of the Ebanista Team, the first official Ebanista and the second Ebanista, respectively.

The relationship of the staff affected by this review and the dates of application provided by the Departments of the Departments is attached.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the "Official State Gazette" as an integral part of the Collective Agreement and with the effect of the dates of application. cited above.

Description of the categories

First Administrative Officer with English. -It is the Administrative Officer who, with full knowledge of his profession, autonomy and responsibility, has a specific service in charge, in which it is necessary to express himself in English. It shall carry out the administrative work organisation, precise calculations, internal or external arrangements, personal or telephone attention, drafting, typing, checking and reporting, correspondence and completion of printed the purpose of carrying out the work entrusted in accordance with the controls, established rules or indications of a superior; he shall also act as Secretary in the meetings of those Commissions which affect his Department for which it is required, observing the proper discretion in the development of their work. For which you will perform the following functions:

Organization of the work entrusted to, by means of precise calculations, to obtain the established controls of: Production, accounting, purchases, sales, invoicing, payroll, social insurance, "stocks", etc., always in function of existing legislation, established rules or indications of a superior.

Making reports, establishing the datapool, interpreting the results and obtaining conclusions, proposing in your case any modifications you deem appropriate.

Internal or external management of labor, commercial, administrative or any other nature entrusted to you before: Personnel of the National Mint and Timbre, official agencies and private companies, they must be moved to the same, if necessary.

Personal or telephone attention to give or obtain information about any matter related to your service, in order to obtain the precise data for your management.

Writing and typing, with a minimum of 300 clicks per minute, completed and checking printed or control documents, as well as their registration, file and custody, maintaining the established rules of action.

Handling of computer terminals or personal computers as well as of programs prepared for the purpose, for the introduction, obtaining or modification of data.

Distribution and supervision of the work of the Administrativos who collaborate with him in his duties, solving the doubts that may arise.

Administrative of Workshop. -It is the Administrative Department that with full knowledge of its role and under the supervision of the Head of Workshop has as mission the administrative control of a workshop. It will have to carry out administrative control of production, raw materials, auxiliaries and services, as well as the personnel, making in each case the corresponding documentation, which prior to its departure will be supervised and conformed by the Head of Workshop, he will also provide the Department's Directorate with the information required for the preparation of reports, statistics, production situation and personnel, and the reports should be drawn up if necessary. (a) the subject of his/her workshop and/or competence on request, all following the guidelines for its immediate superior. For which you will perform the following functions:

Checking, correcting and confection, where appropriate, of the parts of production, machine, control of inputs-outputs of materials and products, control of daily production, and all that in relation to the production required, preparing them for the signature of their immediate superior and subsequent delivery in the Department office or in the places established for each case.

Making, typing and processing of all types of documents related to the control of the staff and the administrative management of the workshop, such as: Salidas, assistance, differences of category, complements, overtime, manufacturing orders, request for repairs or services, voucher for request or return of materials, internal statements and all the documentation required, passing it to the firm for subsequent management and archiving; in some cases This requires your contact with other Departments in order to follow up.

Perform inventories, periodic stock records, and statistics on the production and personnel situation, according to the indications received from your immediate superior.

Handling of computer terminals or personal computers, as well as programs prepared for the purpose of the introduction, obtaining or modification of data.

Replacement of the Head of Workshop during his/her absences throughout the working day, in which case, he/she assumes his/her administrative functions, following the guidelines previously marked by him, and must locate him inside the room f April or by going to the nearest Head of Workshop in those unforeseen situations that require their presence.

Corrector. -It is the operator who, with full knowledge of his profession, verifies the printing and preprint tests with the original. You will need to know and apply the grammatical and composition, distribution, page and marginalisation rules to perfection, correcting the errata, print failures or omissions to obtain the product according to the original, with the quality and required aesthetics. For which you will perform the following functions:

Reading tests, verifying them with the original, pointing to the errata, misspellings, punctuation, drafting, or omissions that can be found. It also performs style correction with the original and sometimes determines job style criteria to normalize them before they move to the keylist.

Checks that the modifications indicated in previous corrections or indications made by the customer have been made.

Verification of tests for print compliance, checking: Quality of printing, errata, marginalisation, printing and intonation, etc., taking responsibility for their correct agreement with the original or with the rules In addition, it checks the assemblies before the past to plates, checking the correct distribution of pages and margins.

Tailoring of summaries and foliate, taking into account that the order of the pages, white pages, etc., is the correct one.

Encoding, archiving, and custody of the corrected and original tests.

Teclista-Maquetador. -It is the operator who, with full knowledge of his profession, has as mission the composition and layout of texts and images by computer systems. You must know the grammatical, orthographic, composition, as well as everything related to the layout, marginalization and assembly for the realization of any of the works entrusted to you as: mathematical formulas, printed, tables, charts, etc. that integrate or not images, by entering the corresponding texts according to the original. For which you will perform the following functions:

Team selection and corresponding program, introducing this one. Verification of the original, adjustment of the marginalization, family and body of letter according to the established norms and aesthetic sense, introducing the precise instructions for drawing on screen the composition of lines, texts and operating on the memory to delete, duplicate, copy and transfer data, being responsible for its correct quality and production.

File and transfer of the different files to the corresponding memory units, filmed equipment or floppies, carrying out the conversion, if necessary, for their correct interpretation by the different units.

File and custody of memory floppies, encoded and labeled for later use.

Filming on the corresponding equipment and processed in machine of the works, taking care of its correct operation and altering the order of filming according to the indications that it receives.

Realization of modifications given by the Corrector for the variation of texts, layout or composition.

Composition of lottery lists, either from file received via cable or by conforming it through the numbers received by public address and taking the accumulation of prizes. Makes the corrections indicated by the factory staff responsible for checking the list before publication.

Official First Compaginator of Photocomposition. -It is the operator who with full knowledge of his profession has as mission the making of films of photocomposition and his manual composition to make printing plates. For which you will perform the following functions:

Reproduction of original film-mounted, by means of the handling of a contact press, previously performing the calculation of light intensity and time of exposure, depending on the tonality of the original and film used.

Assembly, adjustment, married of images corresponding to one or more colors, retouching and making of masks, as well as the revealed mechanical or manual, if any, of the works.

Performing the adjustment, mounting, marginalizing, paging, corrections, and retouching of original film, distributing the pages in the documents according to the subsequent processes so that once folded they can be agreed with the original. It shall also carry out the preparation of falchairs, face masks, layout and assembly of lines, tables, graphs, proportion calculations, transformation of measures and all necessary for the production of any type of photocomposition assemblies of agreement with the original or established rules, being responsible for its correct quality and production.

Reproduction, using a photocopier machine, of the originals for the sending of tests to the customer, once they have been corrected.

Composition of lottery lists, making it through the numbers received by public address and taking the accumulation of prizes. Makes the corrections indicated by the factory staff responsible for checking the list before publication.

File, encoding and custody of assemblies that are expected to be used again.

Cleaning up your job position and acting area, solving small breakdowns and assisting maintenance staff in incident resolution.

Test-Offset shooter. -It is the operator who, with full knowledge of his profession, has as a mission the obtaining of tests in offset or chemical systems. You will need to make offset machine printing to a color or a "Cromalin" machine, in order to obtain the tests for these systems with the required quality. For which you will perform the following functions:

Preparation of the machine, mounting of plates and printing on any type of test stand or small pulls, either to a colour or to overlap (trichroms, quadricromies, etc.), with the colours of range or by means of composition of the same for obtaining the required tones, according to the scale "Pantone". Occasionally, it proposes tonal variations on the original or color corrections when it detects possible printing problems.

Final test of the test and the safety elements visually and by using the assigned measurement and computer equipment.

Control, file and custody of originals, security and test media, and subsequent reuse, by completing the forms required for the work processes assigned to you.

Preparation of positive selection or photolytes for obtaining, using primary or composition colours and after rolling, insolation, impregnated and cleaning, "Cromalin" equipment tests.

Iris test stamping with determination of color fields and composition of the same to obtain from a single pass with offset system or "Cromalin" the faithful reproduction of the original.

Entertainment of machines and equipment, resolution of small faults, assembly of spare parts and replacement of auxiliary materials, assisting the maintenance staff in the repairs whenever they are re-wanted.

Tintero Helper. Value Documents. -It is the operator who with sufficient knowledge of his profession, and under the coordination and supervision of the Official First Team Chief, deals with the perfect functioning of the machine's inking system lithographic, supplying the inks and keeping them in suitable conditions for a correct impression. To do this, you will perform the following functions:

Sourcing and preparation of necessary auxiliary materials.

Preparation of tinteros and assembly of beaters, feeding of inks during the spin, taking charge of the different batteries of intage.

Extraction and delivery to the first officer of sample sheets according to the established guidelines, noting the measurements made by the sample and removing the printed paper from the sactor.

Under the guidelines of the First Team Chief Officer performs, along with the rest of the endowment, the necessary adjustments, changes of work and cleanliness of all the elements of the machine and its area of action; likewise, aid to the entertainment and repair of faults to the First and Personal Maintenance, as long as it is required.

Replacement of the Second Officer and the Reviewer, if necessary, during breaks established throughout the working day, following the guidelines marked by the First Team Chief Officer.

Official First Photographic-Retoiletry. -It is the operator who, with full knowledge of his profession, has as mission the reproduction of originals by means of conventional and/or computer photographic systems. He must know and carry out the various procedures of preparation, composition and retouching of originals, enlargement, reduction, filters, frames, contacts, distortion, repeated and revealed to obtain the reproduction with aesthetic sense and in accordance with the conditions required. For which you will perform the following functions:

Study and preparation of originals, determining the procedure to be followed, for which the measurement of color density, dimensions, time calculation of exposure and light intensity, assembly and preparation of filters, frames, contacts, masks, etc., as well as all the necessary operations for the correct obtaining of the product.

Reproduction of all kinds of originals, using the appropriate technique for each job, for which the adjustment of cameras, filters, lenses, foci, enlargement, reduction, blur, distortion, repeated (manual or mechanical), etc., depending on the needs of the finished product.

Obtaining positive and negative tone, line and hatch, whether in camera, press or extender, for use in various applications.

Mechanical development, with adjustment and verification of: Temperature, regenerated, processing speed, oxidation, ratio of the mixture, etc., by means of the established systems. It must also carry out the manual development of those works which, by their characteristics, so require.

Retouching of originals and reproductions on any of the systems (mechanical, chemical or dry).

Preparation of the computer equipment, adapting its possibilities to the needs of the work to be carried out. Digitalisation and image processing by means of the appropriate software package, introducing the necessary data and addressing the possible deficiencies of the original. It removes, adds, modifies and rebrands details, mounts, composes, copies, reduces or extends images or elements, performs color retouches, draws simple character graphics, etc., in the whole image or in zones.

Preparing and sending files to filming, assigning the parameters for correct interpretation in film and selecting priorities in print queue. File of files in the corresponding magnetic support, recovering them for use when necessary.

Complex preparation of originals, combining any of the techniques described for obtaining correct quality and production.

Getting tests by handling the "Cromalin" team.

Entertainment of the machines and replacement of auxiliary materials, carrying out the tests and precise calculations for the mixing and correction of the revealing liquid, assembly of spare parts and repair of small faults, as well as the cleaning of all its elements and area of action, helping the staff who are entrusted with their maintenance whenever required.

Chromatography Technician. -It is the medium or assimilated in the required specialty that, with full knowledge of their profession and the techniques employed, initiative and responsibility, has as mission the analysis of components by means of chromatographic techniques and analysis of pollutants in the environment and waste water. It shall study, propose and test methods on the different chromatography equipment, as well as the taking of samples and physical or chemical data; taking responsibility for the correct execution of their work in accordance with the rules and established specifications. For which you will perform the following functions:

Take product samples, selecting the appropriate equipment. Preparation of the samples for analysis, treating them with the necessary substances, and appropriate methods for segregating the product to be analyzed. Preparation of standard samples, contrasting and calibrated of the assigned equipment, collaborating if necessary with the personnel assigned to them.

Study of the results obtained, comparing them with the type behavior of other substances and dismissing those that interfere, in order to determine the analyte and its presence index.

Study and testing methods for the separation of new substances into the National Currency and Timbre Factory. Description of test procedures for their performance by the Analysts.

Conducting various physico-chemical assays for the analysis of substances: Particle count in environment, gravimetry, ink flocculation, chemical and biological demand of O, filling in the established forms.

Management of computer terminals and personal computers, as well as of the programs prepared for the purpose for the introduction, obtaining or modification of data, making groups of commands in programs for the test automation.

Realization of how many reports are required, related to your work, being monitored by your immediate superior.

Spectrometry technicians. -It is the medium or assimilated in the required specialty that, with full knowledge of their profession and the techniques employed, initiative and responsibility, has as mission the analysis of alloys by means of spectrometry techniques, as well as other tests with metal compounds. It will have to study, propose and perform test methods on the different spectrometry teams responsible for the correct execution of their work according to the established standards and specifications. For which you will perform the following functions:

Preparation of the patterns and samples to be analyzed, performing the treatment and dilution of the alloy or other patterns, with the necessary products in the case of liquid samples, or by melting, alloy, centrifuged, Endorsed and/or polished.

Connection, calibration, normalized, profiling, preparation of the corresponding equipment, regulating its elements and using the appropriate programs to the variables of the sample to be analyzed.

Management of computer terminals, personal computers, and programs prepared for the purpose of data entry, procurement or modification, by making command pools in programs for automation of tests.

Study of the results obtained, comparing them with a type of behavior of other substances and dismissing those that interfere, in order to determine from analyte and its presence index.

Study and development of test methods for the determination of the presence of metals. Description of test procedures for their performance by the Analysts.

Conducting various physico-chemical tests for the analysis of metals: Coping, oxirreduction-potentiometry and iodometry, chemical assessment of galvanic baths, control of metals in wastewater, etc.

Realization of how many reports are required, related to your work, being monitored by your immediate superior.

Delineant second. -It is the technician who, with basic knowledge of his profession, has as mission the performance of administrative functions entrusted and the retouching and/or calco of drawings of simple difficulty, according to the indications received from the technicians of higher category. For which you will perform the following functions:

Retain and/or calca the simple difficulty drawings that the top category technicians tell you.

Making copies of the plans and/or technical documentation in the reproduction of plans or photocopies, as well as the elementary tasks of maintenance, change of toner, coil of paper and cleaning of surfaces, indicating to its the need for replacement of consumables.

Preparation of the documentation relating to the work of the area, carrying out its classification, registration and archiving, in accordance with the established rules.

Personal attention, accompanied if necessary by persons outside the National Mint and Timbre, and must observe the appropriate discretion, and telephone attention passing communication to the person concerned or, in his absence, taking recon.

Security Project Technician. -It is the medium in the required specialty that, with full knowledge of its profession, autonomy and responsibility, has as mission the verification of projects in the field of safety and hygiene at work, the design of safety systems and facilities, the development of the environmental performance of the National Mint and Timbre, as well as the specific tasks related to its area of work that are required. All this under the supervision and approval of his immediate superior. For which you will perform the following functions:

Verification of works and installations projects, checking that the building, plant distribution and general conditions of the site are in accordance with the current regulations.

Design of installations and systems of passive safety and protection-fire extinguishing for new projects or reforms that are carried out, collaborating and supervising the designs made in external companies work or provide services to this National Currency and Timbre Factory.

Environmental management, developing both internal actions for the treatment of waste from the National Mint and Timbre, as well as the external actions in declarations and documents required by the agencies Officers with competence in the field of environmental management control of industrial facilities.

Selection and verification of the safety and environmental material, checking that they are adapted to the National Mint and Timbre and to the legal regulations in these matters.

Maintenance of the file of regulations and legislation that affect your work area, using the published information or technical queries to the competent agencies.

Designers of Originals. -It is the technician who, with full knowledge of his profession, autonomy and responsibility, has as mission the project, conventional design and/or assisted by computer equipment, and artistic finish total bank notes, postage stamps, timings, national lottery, security documents and any other work entrusted to you. He must know perfectly the technique appropriate to each type of work, applying it according to the same in order to obtain the original drawing for his reproduction in the graphic workshops, observing at all times the due discretion as to the development of his work. For which you will perform the following functions:

Implementation of the projects entrusted to you, applying artistic techniques, computer technologies (digitalization, image processing and printing), security and printing systems and procedures anti-counterfeiting, as well as the role and safety inks established for each job.

Supervision of the work done by the technicians or operatives who collaborate with him in his or her duties, to which he guides in his development and solves the doubts that may be presented to them.

Quality Technician. -It is the technician who, with full knowledge of his profession, autonomy and responsibility and under the guidelines and supervision of the Technical Manager of Quality, has as mission the study, development and application of the quality controls of the products. It should develop draft standards and procedures for quality assurance, both in production processes and in concerted quality with suppliers or customers, collaborating in the implementation of these standards and procedures. It will also carry out monitoring and evaluation of results, analysing deviations from the quality objectives and proposing solutions. For which you will perform the following functions:

Analysis of each of the manufacturing processes of the products, collecting and elaborating data on variables and attributes, rejection rate, etc., making the tables, guides, control graphs and sampling plans necessary to obtain the distribution of defects and their causes as well as studies on variability and capacity of machines and natural tolerances of the process, in order to establish the control systems.

Elaboration of the draft quality manuals for the product, collecting the quality standards of each process and those agreements with suppliers and customers.

Collaboration in the implementation of quality standards and procedures, assisting in training and advising staff responsible for conducting self-controls, inspections, audits and data analysis. Monitoring of the procedures implemented and evaluation of the indices and quality limits, both in variables and attributes, in order to correct possible deviations.

Through internal or external audits, it will propose to its superior the validity of the quality system, verifying that the operations are performed and recorded according to the established rules and procedures or identifying The invention also relates to a method for improving the system for adapting the technology changes and the new quality concepts.

Personal computer management and quality data and/or data processing programs, as well as reports and studies of all types on their field of competence.

DNI programmer operator. -It is the technician who with sufficient knowledge of his profession and with the mastery of the possibilities and resources of the existing teams, under the supervision and coordination of a technical category (a) the implementation and control of the different processes, taking into account the systems, including control and security aids, for the procurement of a single market, and the implementation and control of the various processes, correct quality and production. It also deals with relations, with reference to the work of manufacturing the national identity document, with the various Departments of Factory at the computer level, external companies in relation to the maintenance of the "software" and of the "hardware" and the Police's computer service. For which you will perform the following functions:

Preparation, configuration, commissioning and stopping of equipment and systems, verifying its correct operation, state of the peripherals, program load, utilities, etc.

Running the different processes, controlling their correct development, modifying the parameters that are necessary for the development of their work, attending and solving the calls and messages of the systems, processes and equipment, as well as any errors and interference that occur, making the necessary dumps, deleted, copies and recoveries.

Realization of the basic operating programs, defining the general characteristics for the job to be performed, as well as elementary modifications of variables in the programs.

Reception, control, classification, identification and archiving of the different media and documentation used, completing the one related to the development of your work and attending the necessary consultations on the state of production.

Support at the computer level in the problems presented to the workshop operators in the use of consoles.

Supply and replacement of all types of materials by communicating to the Head of Workshop the need to replace consumable materials, entertainment and periodic cleaning of the equipment and area of action, collaborating with the personnel who are entrusted with their maintenance if necessary.

Official first Minerva-Typography-Offset to a color. -It is the operator who, with full knowledge, of his profession can handle any of the offset machines to a color and flat or flat type, be they these The invention also relates to a method for producing a manual or automatic marking system, said system having to make the necessary preparations and adjustments of all the elements thereof in order to print any type of work on both printing systems, according to the requirements of the finished product. For which you will perform the following functions:

Supply of paper, preparation and adjustment of machines, mixing of colours, assembly and adjustment of plates, beds, rubbers, numerals, climbing, tinteros and other necessary elements as well as auxiliary systems, including control and security, taking responsibility for the circulation and making the necessary corrections to obtain a correct quality and production.

Extraction and qualitative and quantitative verification of the product and withdrawal of the defective effects, introducing the repositions and completion of the required forms related to their work.

Performing the work and cleaning changes of all the elements of the machines and their area of action, as well as the entertainment of the same, resolution of small breakdowns and assembly of spare parts, helping the staff of Maintenance whenever required.

Official 2nd Machine Selection and Number of Tickets. -It is the operator who with sufficient knowledge of the machines and under the coordination of the Official First Team Chief, collaborates with this in all its functions for selection and number of effects. You will need to do your work on both machines in an alternative way during the run. For which you will perform the following functions:

In preparations and format changes:

Aid to the first officer in the preparation of the machine, changes of work, supply and removal of the paper, packaging and sealing of the product according to the established rules, as well as the cleaning of all the elements of the machine and its area of action verifying that there is no effect between its mechanisms, assisting in the entertainment and repair of faults to the First and Personal Maintenance, as long as it is required.

During the run:

Food of the classifier machine maintaining its cadence and withdrawal of defective effects in the established order, filling in the production and control forms required.

Review by objeo of obverse and reverse of the effects validated by the classifier, in order to remove the defective ones that it detects.

Attention to auxiliary systems, including control and safety systems, and the sorter of the sorting machine to simultaneously introduce them into the feeder of the numerator, storing the surplus of effects in the form and place to be indicated or established.

Replacement to the first officer during the run on the breaks established throughout the working day, keeping the guidelines marked by this one.

Passport Assistant. -It is the operator who, with sufficient knowledge of the process and the lines of manufacture of passports and under the coordination of the Machinist, has as main mission the verification of the correct finishing of the product, collaborating with the Machinist in its functions. It also performs individual passport numbering on thermotypic and boring machines. For which you will perform the following functions:

Sourcing, preparation, removal and loading of materials, on itself or through manual, mechanical or electrical transpalette.

Qualitative and quantitative verification of the product, carrying out a self-control in the phases of the established process: Position of the elements that compose it, stamping, numbering, etc., according to the requirements required, performing the necessary operations for its finishing, being responsible for a correct quality and production.

Attention to the operation of the line, feeding of the chargers and resolution of the interferences, following the guidelines received from the Machinist, when replaced by it periodically or in the breaks established.

Collaborates with the Machinist in all its functions, following its guidelines, as well as with the maintenance staff in the repairs, as long as it is required.

Numbering of passports in thermotypic and boring machines, for which the machines prepare and make the necessary adjustments and checks for the numeral, according to the requirements of the product. It also deals with entertainment, replacement of elements, repair of small breakdowns and cleaning of machines and area of action.

Revisory-Number of Passports. -It is the operator who, with full knowledge of his profession, has as mission the number of passports in thermotypic and boring machines, introduction of repositions, packaging, identification and verification so that the product complies with the required conditions. For which you will perform the following functions:

Numbering of parts in thermotypic and boring machines, for which the machines are prepared and makes the necessary adjustments and checks for the numbered according to the requirements of the product, taking responsibility for its correct quality and production. It also deals with entertainment, replacement of elements, repair of small breakdowns and cleaning of the machine and area of action.

Introduction of repositions, removal of defective, packaging, identification, placement, checking of quantities and correspondence of numbering, according to established rules, completing the printed and printed books control with the required data.

Performing the functions corresponding to the Passport Manufacturing Assistant category, when required.

Official Guillotinero. -It is the operator who, with full knowledge of the automatic guillotines (with or without processor) and trilateral, cuts any kind of paper or cardboard according to the requirements of the product, making the precise changes and adjustments of blades, quadrillos, squalls, piss and all the necessary elements, as well as to attend to auxiliary systems, including control and safety systems. For which you will perform the following functions:

Provisioning, unsealed, counted, numbering check, replacement of defective work by corresponding repositions, removal and introduction of head, cut, seal, preparation and removal of the paper, maintaining the required order in the various effects, postets or cut.

Preparation of the machine with the cutting measures, either by means of processor or product marking, making the necessary adjustments to obtain a correct quality and production.

Court check done, filling out how many control forms are required.

Replacement of spare parts and cleaning of all machine elements and their performance area, as well as the entertainment of the same and resolution of small breakdowns, helping the maintenance staff whenever they are requires.

Official First Record MechanicoCAD. -It is the operator who, with full knowledge of his profession and the equipment of assisted design and machine of mechanical reproduction in his position, has as mission the obtaining of dies, useful, deformation or cutting elements, milling work, parts, profiles or any element capable of being obtained by the above methods from drawings, models, sketches or verbal specifications. For the purposes of preparing and managing the equipment at its disposal, having regard to the auxiliary systems, including control and safety systems, for obtaining the product in accordance with the requirements required, taking responsibility for its correct quality and production. For this, perform the following functions:

Study of the work to be carried out, preparation of models, confection of moulds or obtaining of the design in the computer using the equipments and applications that it has, supplying the characteristics of the job to execute and post-processing of the same. It also makes modifications to the design for the manufacture of direct dies and interventions in matrices and punches. Calculation of the working arrangements, volumes and areas, according to formulas or tables, applying the necessary corrections.

Preparing the machine, tools and work, making adjustments and corrections of "software", as well as the necessary tests and checks. The programme is designed to improve the quality of the work and to improve the quality of the work.

Preparing, adjusting and handling any of the machines for mechanical reproduction: Mechanical or manual pantographs and presses.

Performing the elementary maintenance of machinery, solving small breakdowns, making useful simple tools that you may need in the development of your work, control and storage of the parts of machinery in your office, cleaning of all its elements and area of action, collaborating with the maintenance staff whenever required.

First Chief of the Hincado and Pulido Team. -It is the operator who, in addition to performing the functions corresponding to the first officer of his profession, coordinates a number equal to or greater than two First Officers, dealing with the control and identification of the minting tools.

First Officer Hincado and Pulido. -It is the operator who, with full knowledge of his profession, has as a mission the production of reproductions in press of coinage dies. You must perform the hincado, granate and polishing of dies and useful according to the required degree of finish. For which you will perform the following functions:

Preparation of the press, useful and adjustment of the pressures required, performing the hincado, rehincing and cleaning, taking care of the auxiliary systems, including those of control and safety.

Preparation of work items, granular and polished of useful in the phases of the established process, with the different varieties of the finish, covering in addition to the repast, protection of plans and engravings, cleaning, removal of burrs, marking of references and all the necessary operations until its perfect finish, being responsible for a correct quality and production.

Cleaning of machinery and performance area, as well as repair of small breakdowns and replacement of simple elements, assisting the maintenance staff whenever required.

Fulfillment of the forms required for your job.

Official First Chief of the Ebanista Team. -It is the operator who, in addition to performing the functions corresponding to the category of First Officer of his profession, coordinates to a number equal to or greater than two First Officers, thus as to the staff of the lower categories assigned to them.

First Ebanista Officer. -It is the operator who, with full knowledge of his profession, performs all kinds of carpentry works, either alone or with the collaboration of officers of second or lower category staff, to whom monitors and directs. For which you will perform the following functions:

According to the plans, drawings or indications of the Head of Workshop or Head of Equipment, it manufactures all kinds of furniture and elements of construction or decoration, as well as the repairs that are entrusted to it. It must carry out the transport and use of auxiliary raw materials and necessary tools, operate the machinery and all the necessary operations for the finishing of the product assigned to it, either within the factory or outside the itself, observing the established rules and taking responsibility for its proper implementation.

Entertainment of machines and tools, resolution of small faults, assembly of spare parts and cleaning of all its elements and area of action.

Supervision of the work of the second officer when he collaborates with him in his duties, orienting him and resolving the doubts that could be raised.

Second Ebanista Officer. -It is the operator who, with sufficient knowledge of his profession and following the indications of a First Officer or Head of Equipment, performs all kinds of carpentry works under his supervision, observing the safety standards established in each case. For which you will perform the following functions:

According to the drawings, sketches or verbal instructions of the First Officer or Team Chief, he performs individually simple works such as pallets, boards, work tables and any kind of repair that due the difficulty is entrusted to it, taking responsibility for its correct execution.

Collaborates with the first officer in the manufacture of all types of furniture and elements of construction or decoration, having to carry out the transport and supply of raw materials, auxiliaries and tools, cutting and preparation of material according to its indications and all the operations it entrusts to it for the correct finishing of the product, always acting under its supervision.

Help the first officer in the entertainment of machines and tools, resolution of breakdowns, assembly of spare parts and cleaning of all its elements and area of action.

Finishing machines for Finishing cutters. -It is the operator that, with full knowledge of the finishing cutting machines, performs the longitudinal and transverse cutting of the rolls of paper. You must fill in the posts of: Machine Machine. (Finished) Cutter Cutter (Finished) and Bobinator (Finished) Corter's Machinist.

Finishing assistant. -It is the operator who, with sufficient knowledge of the finishing cutting machines, and under the supervision of the Machinist to be assigned, assists him in his duties. You will have to fill the posts of: Transversal Machine Assistant (Finishes) and Assistant to the Corter-Bobler (Finished).