Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the case of annulment of the rules submitted by the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, with Royal Decree 1614/1985 of 1 August, and recognised by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE annulled during the month of February 2014, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, March 12, 2014. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Rules nullified in the month of February 2014
Title | |
---|---|
60133:2001 | Dimensions of magnetic cores in pots made of magnetic oxides and associated parts (Ratified by AENOR in July 2001) |
60874-19:1997 |
Fiber connectors and optical cables. Part 19: Intermediate specification for fiber optic connectors. Type SC-D (uplex). (Ratified by AENOR in October 1998. |
EN 61011 + AC: 1991 | Electrified fence feeder. Safety requirements for electrified fence feeders running through the network. (Ratified by AENOR in November 1995. |
61011/A11:1996 | Electrified Fence-Feeders. Safety requirements for electrified fence feeders running through the network. (Ratified by AENOR in September 1996. |
61011/A2:1994 | Electrified Fence-Feeders. Safety requirements for electrified fence feeders running through the network. (Ratified by AENOR in November 1995. |
EN 61011-1 + AC: 1991 | Electrified fence feeder. Safety requirements for electrified fence feeders operating with batteries or accumulators, suitable for connection to the power distribution network (ratified by AENOR in November 1995.) |
EN 61011-1/A2:1994 | Electrified Fence-Feeders. Safety requirements for electrified fence feeders operating with batteries or accumulators, suitable for connection to the power distribution network (ratified by AENOR in November 1995.) |
EN 61011-2 + AC: 1991 | Electrified Fence-Feeders. Safety requirements for electrified fence feeders operating with batteries or accumulators, not suitable for connection to the power distribution network (ratified by AENOR in November 1995.) |
EN 61011-2/A2:1994 | Electrified Fence-Feeders. Safety requirements for electrified fence feeders operating with batteries or accumulators, not suitable for connection to the power distribution network (ratified by AENOR in November 1995.) |
EN 61075:1993 | loran-c receivers for ships. Rules on minimum fitness requirements for the function. Test methods and required results. (Ratified by AENOR in May 1995. |
EN 61280-2-5:1998 | Fibre-optic communication subsystem. Basic testing procedures. Part 2-5: Test procedures for digital systems. Measure of the transfer function. (Ratified by AENOR in November 1998. |
61753-2-3:2001 | Operating rule for fiber optic interconnect devices and passive components. Part 2-3: Non-selective forking devices of wavelength, not connected, monomode, 1xN, and 2xN for category U. Uncontrolled environment. (Ratified by AENOR in May 2002 |
61850-9-1:2003 | Systems and communication networks in substations. Part 9-1: Communications-specific mapping systems. Serial unidirectional point-multipoint link (Ratified by AENOR in September 2003) |
61881:1999 | Rail Applications-Material rolling-Condensers for power electronics. (Ratified by AENOR in May 2001 |
61883-4:1998 | Audio/video equipment for the consumer. Digital interface. Part 4: Transmission of MPEG2-TS data. (Ratified by AENOR in July 1998. |
EN 61970-402:2008 | Application Programming Interface for Power Management Systems (EMS-API). Part 402: Component Interface Specification (CIS). Common services. (Ratified by AENOR in December 2008. |
EN 61970-403:2008 | Application Programming Interface for Power Management Systems (EMS-API). Part 403: Component Interface Specification (CIS). Access to generic data. (Ratified by AENOR in December 2008. |
EN 61970-404:2007 | Application Programming Interface for Power Management Systems (EMS-API). Part 404: High-speed access to data (HSDA). (IEC 61970-404:2007). (Ratified by AENOR in February 2008. |
EN 61970-405:2007 | Application Programming Interface for Power Management Systems (EMS-API). Part 405: Generic events and subscriptions (GES). (IEC 61970-405:2007). (Ratified by AENOR in February 2008. |
EN 61970-407:2007 | Application Programming Interface for Power Management Systems (EMS-API). Part 407: Access to time series data (TSDA). (IEC 61970-407:2007). (Ratified by AENOR in February 2008. |
EN 62359:2005 | Ultrasounds. Characterization of the field. Test methods for the determination of thermal and mechanical indices related to ultrasonic medical diagnostic fields. (Ratified by AENOR in October 2009. |
123100-800:1992 | Special framework training: Circuit plates with holes for insertion components. (Ratified by AENOR in September 1996. |
123200-800:1992 | Special framework training: Circuit plates with metallized holes for the insertion of components. (Ratified by AENOR in September 1996. |
123300-800:1992 | Special framework training: Multi-layer circuit plates with holes metallized for component insertion. (Ratified by AENOR in September 1996.) |
150014:1996 | Particular specification: Tiristors diodes, surge limiters transitional. (Ratified by AENOR in May 1996. |
167000/A1:1997 | Generic Specification: Piezoelectric Filters. (Ratified by AENOR in July 1998. |
167000:1993 | Generic Specification: Piezoelectric Filters. (Ratified by AENOR in September 1996.) |
167100:1992 | Intermediate specification: piezoelectric filters (capacity approval production). (Ratified by AENOR in January 1996.) |
169200:1993 | Intermediate specification: Oscillators controlled by quartz crystals (approval of the qualification). (Ratified by AENOR in January 1996.) |
169201:1993 | Detail frame specification: oscillators controlled by quartz crystals (approval of the qualification). (Ratified by AENOR in January 1996. |
ENV 50208-6:1997 | Data exchange format for measured and simulated data (ISMO). (Ratified by AENOR in December 1997. |
ENV 50218:1996 | Description of a mini component ("chip") European parameterzable test. (Ratified by AENOR in December 1997. |
ENV 50219:1996 | Description of the reliability of the test structures of the mini components ("chip") European test. (Ratified by AENOR in December 1997. |
236.2S1:1975 | Measurement methods for radio emitters. Part 2: Bandwidth, power outside the band and power of non-essential oscillations. (Ratified by AENOR in May 1995. |
236.3S1:1975 | Measurement methods for radio emitters. Part 3: desired and unwanted modulation. First supplement: Appendices. Second supplement: unwanted modulation, including noise and noise modulation. (Ratified by AENOR in May 1995. |
236.4S2:1977 | Measurement methods for radio emitters. Part 4: amplitude/frequency characteristics and non-linear distortion in telephony emitters and sound broadcasting. First supplement: section three. (Ratified by AENOR in May 1995. |
250.2S1:1978 | Electric appliances with motor for domestic and analog uses. General security rules (ratified by AENOR in January 1995. |
251S3/A1:1985 | Security of appliances and appliances analogues. General conditions. (Ratified by AENOR in February 1997. |
251S3/A2:1987 | Security of appliances and analogues. General conditions. (Ratified by AENOR in February 1997. |
251S3/A3:1987 | Security of appliances and analogues. General conditions. (Ratified by AENOR in February 1997. |
251.2S1:1978 | Electrical and Analog Electric Heaters and Calefactors (Ratified by AENOR in January 1995. |
253S3/A1:1987 | Security of appliances and analogues. Part 2: Particular requirements for electric irons (ratified by AENOR in January 1995. |
413.2S2:1994 | Conditions of operation for measuring and control equipment for industrial processes. Part 2: Energy supply. (Ratified by AENOR in April 1996. |
HD 536S1 | Test requirements for the evaluation of the emission of ionising gases during the short circuit tests of the residual differential current automatic switches for domestic and analogue uses. (Ratified by AENOR in March 2001 |
HD 537S1 | Test requirements for the evaluation of the emission of ionising gases during the short circuit tests of the automatic circuit breakers of residual differential current with built-in protection against over-intensities for domestic and analogue uses (ratified by AENOR in March 2001) |
UNE 20613-1/1m: 1993 | Security Electromedical equipment. Part 1: General requirements |
20613-1:1983 | Security of the electromedical equipment. General requirements |
une 20613-1/2m: 1996 | Security of the electromedical equipment. Part 1: General requirements |
UNE-EN 1347:2008 | Ceramic tile adhesives. Determination of the wetting capacity |
UNE-EN 1860-1:2003 | Appliances, solid fuels and ignition systems for the roasting in Barbecues. Part 1: Barbacoas using solid fuels. Testing requirements and methods |
UNE-EN 1860-1:2003/A1:2006 | Appliances, solid fuels, and ignition systems for barbecues. Part 1: Barbacoas using solid fuels. Testing requirements and methods. |
UNE-EN 50090-2-1:1996 | Electronic Systems for Housing and Buildings (HBES). Part 2-1: System Generalities. Architecture |
UNE-EN 50164-4:2009 | Lightning Protection Components (CPCR). Part 4: Requirements for driver fixings |
UNE-EN 50383:2005 | Basic rule for calculation and measurement of fields electromagnetic and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz-40 GHz) |
UNE-EN 50394-1:2005 | Electrical Material for potentially explosive atmospheres. Group I. Intrinsic safety systems. Part 1: Construction and testing |
UNE-EN 60255-22-5:2003 | Electrical gels. Part 22-5: Electrical disturbance tests for measurement relays and protective equipment. Shock wave immunity test |
UNE-EN 60601-2-4:2004 | Electromedical equipment. Part 2-4: Particular requirements for the safety of cardiac defibrillators |
UNE-EN 60601-2-54:2010 | Electromedical equipment. Part 2-54: Particular requirements for basic safety and essential performance characteristics of X-ray and radioscopy equipment |
UNE-EN 60730-1/A12:1996 | Automatic electrical control devices for domestic and analog use. Part 1: General requirements |
UNE-EN 60730-1/A14:1997 | Automatic electric control devices for domestic and analog use. Part 1: General requirements |
UNE-EN 60730-1:1994 | Automatic electric control devices for domestic and analog use. Part 1: General requirements. (Official version EN 60730-1:1991 + Corrigendum 1993 + A1:1991 + A11:1991) |
UNE-EN 60745-2-3:2007 | Power manual tools by electric motor. Security. Part 2-3: Particular requirements for amoladoras, puldors and disk livers (IEC 60745-2-3:2006, modified) |
UNE-EN 60745-2-3:2007/A11:2010 | Electrical manual tools powered by electric motor. Security. Part 2-3: Particular requirements for amoladoras, polishing and disk livers |
UNE-EN 61236:1998 | Seats, Pertigas clamps, and accessories for stress jobs |
UNE-EN 61346-1:1998 | Industrial systems, installations, and industrial equipment and products. Principles of structuring and designation of reference. Part 1: Basic rules |
Security of transformers, power units, and analogues. Part 2-3: Particular requirements for ignition transformers for gas burners and liquid fuels |