Key Benefits:
In compliance with the provisions of Article 11 (f) of the Regulation of the Infrastructure for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of December 28, ("Official State Gazette", No. 32, of 6 February 1996) and having regard to the case for annulment of the rules submitted by the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, According to Royal Decree 1614/1985 of 1 August 1985, and recognised by the additional provision of Royal Decree 2200/1995 of 28 December 1995.
This Directorate General has resolved to publish in the "Official State Gazette" the relationship of Spanish rules UNE annulled during the month of June 2014, identified by its title and numerical code, which is listed as an annex to the present resolution.
Madrid, 8 July 2014. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Rules cancelled in June 2014
Title | |
---|---|
62258-2:2005 |
Semiconductor pill products. Part 2: Exchange data formats. (Ratified by AENOR in September 2005) |
116000-2:1992 | Generic specification: Electromechanical gels of all or nothing. Part 2: Generic data and test methods for delay timer relays. (Ratified by AENOR in September 1996) |
116200:1991 | Intermediate specification: Electromechanical gels of all or nothing (including relays for severe environmental conditions). (Ratified by AENOR in September 1996) |
116203:1994 | Specific Framework Specification: Electromechanical Rels of All or Nothing to Heavy industry applications. (Ratified by AENOR in September 1996) |
116204:1994 | Specific Framework Specification: Electromechanical Rels of All or Nothing hermetically sealed for aggressive industrial environments. (Ratified by AENOR in September 1996) |
116205:1994 | Detail frame specification: Hermetically sealed gels for Severe static environmental conditions. (Ratified by AENOR in January 1996) |
116206:1994 | Detail frame specification: Hermetically sealed gels for conditions Severe mobile environmental. (Ratified by AENOR in January 1996) |
116207:1994 | Detail frame specification: hermetically sealed relays for conditions Severe air environmental. (Ratified by AENOR in January 1996) |
147000:1994 | Generic specification: Zocalos for quality electrical relays evaluated. (Ratified by AENOR in September 1996) |
147100:1993 | Intermediate specification: Zocalos for quality relays evaluated. (Ratified by AENOR in September 1996) |
147101:1994 | Specific framework specification: Zocalos for quality relays evaluated. (Ratified by AENOR in September 1996) |
1006:1950 | A4 format magazine (210 x 297). Dimensions of the composition. Width of the clichés. |
77243-7:2004 | Gas Analysis. Preparation of gas mixtures for calibration. Dynamic volumetric methods. Part 7: Mass flow thermal controllers |
UNE-EN 1821-1:1997 | electrically powered road vehicles. Measurement of road performance. Part 1: All-electric vehicles |
UNE-EN 1821-2:1999 | electrically powered road vehicles. Measurement of road performance. Part 2: Thermal electric hybrid vehicles |
UNE-EN 1986-1:1998 | electrically powered road vehicles. Measurement of energy yields. Part 1: Pure electric vehicles |
UNE-EN 1986-2:2002 | electrically powered road vehicles. Measurement of energy yields. Part 2: Electric-thermal hybrid vehicles |
UNE-EN 1987-1:1997 | electrically powered road vehicles. Specific safety requirements. Part 1: Energy storage in the vehicle itself |
UNE-EN 1987-2:1997 | electrically powered road vehicles. Specific safety requirements. Part 2: Functional safety and fault protection measures |
UNE-EN 1987-3:1998 | Driving road vehicles electrically. Specific safety requirements. Part 3: Protecting users against electrical hazards |
UNE-EN 12736:2002 | Electric road vehicles. Air noise emission of the vehicle during loading with on-board chargers. Determining the sound power level |
UNE-EN 13444-1:2002 | electrically powered road vehicles. Measurement of the emissions of hybrid vehicles. Part 1: Electric-thermal hybrid vehicles |
UNE-EN 13447:2002 | electrically powered road vehicles. Terminology. |
UNE-EN 13808:2005 | Betunes and bituminous binders. Specifications of the cationic bituminous emulsions. |
UNE-EN 13808:2005/1M: 2011 | Betunes and bituminous binders. Specifications of the cationic bituminous emulsions. |
UNE-EN 14137:2004 | Postal services. Quality of service. Measuring the loss of certified mail and other types of postal service that use a tracking and localization system |
UNE-EN 14733:2006 + A1:2011 | Betunes and bituminous binders. Control of factory production of bituminous emulsions, and fluxated and fluidized bitumens. |
UNE-EN 15322:2010 | Betunes and Bituminous binders. Structure of the specification of fluidized and fluxated bituminous binders. |
UNE-EN 50130-4/A1:1998 | Alarm systems. Part 4: Electromagnetic compatibility. Product Family Standard: Immunity requirements for fire detection, intrusion, and social alarm system components |
UNE-EN 50130-4:1997 | Alarm Systems. Part 4: Electromagnetic compatibility. Product Family Standard: Immunity requirements for fire detection, intrusion and social alarm system components |
UNE-EN 50130-4:1997/A2:2005 |
Alarm systems. Part 4: Electromagnetic compatibility. Product Family Standard: Immunity requirements for fire detection, intrusion, and social alarm system components |
UNE-EN 50130-5:2000 | Alarm Systems. Part 5: Environmental Test Methods |
UNE-EN 50482:2009 | Measurement Transformers. Three-phase inductive voltage transformers with Um up to 52 kV. |
UNE-EN 60034-16-1:1996 | rotating electrical machines. Part 16: Excitation systems for synchronous machines. Chapter 1: Definitions |
Continuous current-powered electronic ballasts for fluorescent lamps tubulars. Operating prescriptions | |
UNE-EN 60925/A2:2001 | Continuous current-powered electronic ballasts for fluorescent lamps tubulars. Operating prescriptions |
UNE-EN 60925:1994 | Continuous current-powered electronic ballasts for fluorescent lamps tubulars. Section one-Operating requirements. (Official Version EN 60925:1991) |
UNE-EN 60947-4-2/A1:2003 | Low-voltage appliances. Part 4-2: Contactors and motor starters. Drivers and semiconductor starters of AC motors |
UNE-EN 60947-4-2:2002 | Low voltage device. Part 4-2: Contactors and motor starters. Drivers and semiconductor starters for AC motors |
UNE-EN 60947-4-2:2002 ERRATUM: 2008 | Low tension. Part 4-2: Contactors and motor starters. Drivers and semiconductor starters of AC motors |
UNE-EN 60947-4-2:2002/A2:2007 | Low voltage device. Part 4-2: Contactors and motor starters. Semiconductor drivers and starters for AC motors. (IEC 60947-4-2:1999/A2:2006). |
UNE-EN 60974-12:2008 | Electrical arc welding equipment. Part 12: Connection devices for welding cables. |
UNE-EN 61000-3-12:2006 | Electromagnetic Compatibility (CEM). Part 3-12: Limits for harmonic currents produced by equipment connected to low voltage public networks with input current > 16 A and < = 75 A per phase |
UNE-EN 61300-2-7:1998 | Optical fibre interconnect devices and passive components. Basic tests and measurement procedures. Part 2-7: Ensemble-Time to flex. |
UNE-EN 61307:2006 | Industrial microwave heating installations. Test methods for determining output power (IEC 61307:2006) |
UNE-EN 61347-2-3 CORR: 2003 | Control devices lamp. Part 2-3: Particular requirements for electronic ballasts fed on alternating current for fluorescent lamps |
UNE-EN 61347-2-3:2002 | Lamp Control Devices. Part 2-3: Particular requirements for electronic ballasts fed on alternating current for fluorescent lamps |
UNE-EN 61347-2-3:2002 CORR: 2011 | Lamp Control Devices. Part 2-3: Particular requirements for electronic ballasts fed on alternating current for fluorescent lamps |
UNE-EN 61347-2-3:2002/A1:2006 | Lamp Control Devices. Part 2-3: Particular requirements for electronic ballasts fed on alternating current for fluorescent lamps |
UNE-EN 61347-2-3:2002/A2:2006 | Lamp Control Devices. Part 2-3: Particular requirements for electronic ballasts fed on alternating current for fluorescent lamps (IEC 61347-2-3:2000/A2:2006) |
UNE-EN 61347-2-4 CORR: 2003 | Lamp Control Devices. Part 2-4: Particular requirements for continuous current-fed electronic ballasts for general lighting |
UNE-EN 61347-2-4:2002 | Lamp Control Devices. Part 2-4: Particular requirements for continuous current-fed electronic ballasts for general lighting |
UNE-EN 61347-2-4:2002 CORR: 2011 | Lamp Control Devices. Part 2-4: Particular requirements for continuous current-fed electronic ballasts for general lighting |
UNE-EN 61347-2-5 CORR: 2003 | Lamp Control Devices. Part 2-5: Particular requirements for continuous current-fed electronic ballasts for public transport lighting |
UNE-EN 61347-2-5:2002 | Lamp Control Devices. Part 2-5: Particular requirements for continuous current-fed electronic ballasts for public transport lighting |
UNE-EN 61347-2-5:2002 CORR: 2011 |
Lamp Control Devices. Part 2-5: Particular requirements for continuous current-fed electronic ballasts for public transport lighting |
UNE-EN 61347-2-6 CORR: 2003 | Lamp Control Devices. Part 2-6: Particular requirements for electronic ballasts powered by continuous current for aircraft lighting |
UNE-EN 61347-2-6:2002 | Lamp Control Devices. Part 2-6: Particular requirements for electronic ballasts powered by continuous current for aircraft lighting |
UNE-EN 61347-2-6:2002 CORR: 2011 | Lamp Control Devices. Part 2-6: Particular requirements for electronic ballasts powered by continuous current for aircraft lighting |
UNE-EN 61534-1:2004 | Prefabricated Electrical Pipeline Systems. Part 1: General requirements |
UNE-EN 61812-1 CORR: 1999 | Time gels specified for industrial applications. Part 1: Requirements and Trials. |
Time gels specified for industrial applications. Part 1: Requirements and Trials | |
Time-based gels for industrial applications. Part 1: Requirements and Trials. | |
UNE-EN 61951-2:2004 | Acumulators with alkaline electrolytes or other non-acidic electrolytes. Portable watertight rechargeable elements. Part 2: Metal nickel-hydride |
UNE-EN 62013-1:2007 | Helmet lamps for use in mines at risk of grisu. Part 1: General requirements. Construction and testing related to the risk of explosion. (IEC 62013-1:2005) |