The additional provision of Royal Decree 1393/2007, of 29 October, establishing the ordination of official university teaching, provides that the Ministry of Science and Innovation will specify the the contents of Annex I to which the applications submitted by the universities for obtaining the verification of the plans of studies leading to the obtaining of official degrees of degree or Master's degree, provided for in their Article 24, which they enable for the exercise of regulated professions.

The legislation in force constitutes the profession of Technical Engineer in Topography as a regulated profession whose exercise requires to be in possession of the corresponding official degree of Degree obtained, in this case, according to provided for in Article 12 (9) of Royal Decree 1393/2007, in accordance with the conditions laid down in the Council of Ministers Agreement of 26 December 2008, published in the Official Gazette of the State of 29 January 2009.

In this Agreement, as soon as the necessary reforms of the regulation of the professions are established in general in Spain, the conditions to which the plans of studies will have to be adapted are determined. In its fourth paragraph, in conjunction with the abovementioned additional provision, it entrusts the Minister for Science and Innovation to lay down the requirements for the objectives and title of the title and the planning of the teachings.

Therefore, in the light of the above provisions, it is appropriate to lay down the requirements to which the plans of studies leading to the attainment of the degree to which they enable for the financial year are to be adapted. the profession of Technical Engineer in Topography, who present the universities for verification by the Council of Universities.

In the elaboration of this order, the schools and professional associations concerned have been heard. It has also been informed by the Government's Delegated Committee for Economic Affairs at its meeting on 29 January 2009.

In its virtue, prior to the Council of Universities ' report, I have:

Single item. Requirements of the curricula leading to the attainment of the degrees of Degree that they enable for the exercise of the profession of Technical Engineer in Topography.

The plans of studies leading to the obtaining of the degrees of degree that they enable for the exercise of the profession of Technical Engineer in Topography, must comply, in addition to what is foreseen in the Royal Decree 1393/2007, of 29 of October, for which the ordination of official university teaching is established, the requirements regarding the paragraphs of Annex I to the aforementioned Royal Decree as set out in the Annex to this Order.

Final disposition first. Application and development enablement.

The General Directorate of Universities is authorised to make the necessary resolutions for the development and implementation of this Order.

Final disposition second. Entry into Vigor.

This Order shall enter into force on the day following that of its publication in the Official Gazette of the State.

Madrid, 9 February 2009. -Minister of Science and Innovation, Cristina Garmendia Mendizabal.

ANNEX

Establishment of requirements with respect to certain paragraphs of Annex I to Royal Decree 1393/2007 of 29 October establishing the ordination of official university teaching, relating to memory for the application for verification of official titles

Paragraph 1.1 Denomination: The denomination of the securities shall comply with the provisions of the second paragraph of the Council of Ministers Agreement of 26 December 2008 laying down the conditions to which they shall apply. The plans of studies leading to the acquisition of qualifications enabling the exercise of the regulated profession of Technical Engineer in Topography, published in the "Official Gazette of the State" of 29 January 2009 by Resolution of the Secretariat of State of Universities of 15 January 2009, and the provisions of this Order. So:

1. The name of the official university degrees referred to in the preceding paragraph shall facilitate the identification of the profession for which the exercise enables it and, in no case, may lead to error or confusion as to its effects. professionals.

2. No study plan corresponding to an official university degree whose name includes the express reference to the professions of Technical Engineer in Topography may be the subject of verification by the Council of Universities. that the title complies with the conditions laid down in that Agreement and in this Order.

Paragraph 3. Objectives. Competencies that students must acquire:

Designing and developing geomatic and topographical projects.

Analyze, record, and organize knowledge of the environment and property distribution and use that information for soil planning and management.

Understand and analyze the problems of implantation in the field of infrastructures, constructions and buildings projected from the engineering in topography, analyze the same and proceed to its implementation.

Capacity for decision-making, leadership, human resource management, and inter-disciplinary team management related to spatial information.

Determine, measure, evaluate and represent terrain, three-dimensional objects, points, and trajectories.

Gather and interpret information from the ground and all that geographically and economically related to it.

Managing and implementing research projects development and innovation in the field of this engineering.

Planning, project, direction, execution, and management of measurement processes, information systems, image exploitation, positioning and navigation; modelling, representation and visualisation of territorial information on, low and on the ground surface.

Planning, project, direction, execution and management of processes and products of application to civil work and construction, in the geomatic field.

Planning, project, management, execution and management of processes and application products to environmental, agronomic, forestry and mining engineering, in the geomatic field.

Planning, project, direction, execution and management of processes and application products in the information society in the geomatic field.

Planning, project, management, execution and management of application processes and products in the land registry, territory planning and valuation, in the geomatic field.

Paragraph 5. Teaching planning: The titles referred to in this Agreement are official university degrees of degree, and their curricula shall be of a duration of 240 European credits as referred to in Article 5 of this Agreement. Royal Decree 1393/2007 of 29 October.

The basic training block of 60 credits, the common block to the topography branch of 60 credits, a complete block of 48 credits, corresponding to each specific technology scope, and a job will be completed end of grade of 12 credits.

The curriculum must include at least the following modules:

Module	N. of European credits	Competencies that must
training.	60	Ability to resolve mathematical problems which may arise in engineering. Aptitude for applying knowledge on: linear algebra; geometry; differential geometry; differential and integral calculus; differential and partial derivative equations; numerical methods; numerical algorithmic; statistics and optimization
		Understanding and mastering basic sob concepts re-general laws of mechanics, thermodynamics, fields and waves and electromagnetism and their application for problem solving
		Basic knowledge about the use and programming of computers, operating systems, databases and software with application in engineering
		Spatial vision and knowledge capability of graphical representation techniques, both by methods traditional geometry and geometric geometry to descriptive, as Computer-aided design applications
		Proper knowledge of the business concept, institutional and legal framework of the company. Organization and management of companies
		Basic knowledge of terrain geology and morphology and its application in engineering-related problems. Climatology.
to the Topo branch graphic.	60	Knowledge, Utilization, and Application of Topographical Tools and Methods Adapts two for raising and replanting.
		Knowledge, use and application of instruments and photogrammetric methods suitable for performing mapping
		Knowledge, utilization, and application of treatment techniques. Analysis of spatial data. Study of models applied to engineering and architecture
		Knowledge nto, application and analysis of treatment processes digital images and spatial information, pr airborne sensors and satellites.
		Design, production and dissemination of the basic and thematic mapping; Implementation, management and exploitation of Information Systems Geographic (GIS)
		Knowledge and application of geometric geodesy.
		Knowledge on construction methods; structure analysis; design, execution, and control of infrastructure in the work with multidisciplinary teams, hydraulic knowledge.
		Application of knowledge about: surveillance and environmental impact control; management systems and environmental legislation. Environmental impact assessment. Development of environmental impact studies
		Knowledge about: Safety, health and occupational risks in the field of this engineering and its environment application and development
		Knowledge and ap lication of geomatic methods and techniques in the different scopes engineering.
technology	48	Knowledge, use and application of instruments and photogrammetric and topographical methods suitable for the realization of uprisings mapping.
		Knowledge and management in Multidisciplinary Space Data Infrastructure (IDE) teams.
		Knowledge and application of methods and geodesi's own techniques to physical and spatial; geomagnetism; seismology and seismic engineering; gravimetry
		Conoc
																											appraisals and valuations.
		Aptitude and ability to develop territorial analysis and planning and territorial sustainability in the work with multidisciplinary teams
		Knowledge and method application quadratic minimum tuning in the scope of topo-geodesic, photogrammetric, and cartographic observations as.
-of-grade work.	12	Original exercise to perform individually and present and defend to a university court, consisting of a project in the field of specific technologies Geomatic and Topography Engineering of a professional nature in which the skills acquired in the teachings are integrated and integrated.