Advanced Search

Resolution Of February 23, 2011, At The Polytechnic University Of Madrid, Which Publishes The Plan Of Graduate Studies In Mechanical Engineering.

Original Language Title: Resolución de 23 de febrero de 2011, de la Universidad Politécnica de Madrid, por la que se publica el plan de estudios de Graduado en Ingeniería Mecánica.

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.

TEXT

Obtained the verification of the curriculum by the Council of Universities, prior to the approval of the National Agency for the Evaluation of Quality and Accreditation, as well as the authorization of the Autonomous Community of Madrid, and established the official character of the Title by Agreement of the Council of Ministers of 17 December 2010 (published in the BOE of 14 January 2011).

This Rectorate, in accordance with the provisions of Article 35 of the Organic Law 6/2001, of 21 December, of Universities, in the wording given by the Organic Law 4/2007, of 12 April, amending the Organic Law 6/2001, of 21 December, of Universities, has resolved to publish the plan of studies leading to the obtaining of the official degree of Graduate or Graduate in Mechanical Engineering by the Polytechnic University of Madrid, which grants the Industrial Technical Engineer, in the field of the Specific Technology of Mechanics, according to figure in Order No CIN/351/2009 of 9 February laying down the requirements for the verification of official university degrees which they enable for the exercise of the profession of Industrial Technical Engineer.

The title is structured in the Annex to this Resolution.

Madrid, 23 February 2011.-The Rector, Javier Uceda Antolin.

ANNEX

UNIVERSIDAD POLITÉCNICA DE MADRID

Plan of studies leading to the degree of Graduate or Graduate in Mechanical Engineering by the Polytechnic University of Madrid

(Knowledge Branch: Engineering and Architecture)

5.1 Structure of the teachings.

Type of matter

Credits

training

60

66

Optives

102

End Job

12

Total

240

(*) This Title consists of two itineraries that will be completed exclusively in each of the responsible centers, the Technical School of Industrial Engineers and the University School of Industrial Technical Engineering.

It is understood by optional Materies, in this case, the subjects that integrate an itinerary or another, regardless of the mandatory or optional character within it.

Table 2. Study Plan Structure

Optional.

Materies

Character

Basic Training

to Branch

Required.

U.P.M.

Required.

Specifies

Optional.

itinerary

Optional

Optativity

Optional.

End Job

Required.

To expand information about this curriculum, you can go to the Web page of the Polytechnic University of Madrid: http://www.upm.es.