Having regard to the text of the minutes where the changes in the salary level and definitions of several professional categories are approved, as well as the creation of new ones, corresponding to the valuation of the first half of 2007, the arbitration of the first semester of 2007 and the arbitration carried out by the Provincial Inspection of Labor to the valuation of the first semester 2007 of the company National Factory of Currency and Timbre-Real Casa de la Moneda (Code of Convention number: 90002052011987) minutes which were signed on 15 April, 13 May and 23 May 2011 by the Commission. Joint Commission of Valuation of which representatives of the management of the company and the Committee of the company representing the entity and the employees of the same, to which the favorable report issued by the Ministries of Economy and Finance and Territorial Policy and Public Administration (Executive Committee of the Inter-Ministerial Commission on Remuneration), in compliance with the provisions of Law 39/2010 of 22 December of the General Budget of the State 2011 and in accordance with the provisions of Article 90 (2) and (3) of the Royal Legislative Decree 1/1995, of 24 March, approving the recast text of the Law of the Workers ' Statute and Royal Decree 713/2010, of 28 May, on the registration and deposit of collective agreements and agreements of work,

This Work General Address resolves:

First.

Order the registration of these Acts in the corresponding Register of collective agreements and agreements working through electronic means of this Steering Center, with notification to the Commission Negotiator with the warning to the same of the mandatory compliance of the Law 39/2010, of December 22, of the General Budget of the State for the year 2011, in the execution of those Agreements.

Second.

Arrange your publication in the "Official State Bulletin".

Madrid, 5 August 2011.-The Director General of Labour, P.S. (Royal Decree 777/2011, of 3 June), the Deputy Director General of Normative Planning, Rafael Luis García Matos.

FINAL ACT

Address Representatives:

Ms Marta Bedoya Castro.

D. ª Azucena Barco Rodrigo (advisor).

Workers ' Representatives:

D. Antonio Santiago Morales.

D. Juan Manuel Camara Diaz (advisor).

In Madrid, on 15 April 2011, the members of the Joint Committee on Valuation are meeting, drawing up this final act, where the results of the assessment of the employment positions are collected. first half of 2007.

Posts valued or reviewed at the request of the departments:

Newly Created Posts:

Staff With Command.

Head of Automatic Warehouse and Fielate. Planning, Logistics and Warehouses: 12.

Posts that do not go up level:

Staff With Command.

Chief Administrative Officer of the. Museum: 11.

Operational Staff:

Fresh-Encarted Machine from Smart Cards. Printing: 9.

PVC Card Customization. Printing: 8.

Officer 1. Head of Team Past and Montage. Preprint: 11.

Official 1. Last and Montage. Preprint: 10.

Official 2. Preprint: 8.

Official 2. Flexographic and Finalized Machine. Printing: 8.

Reviewed posts by claim of their newly created occupants:

Technical Staff:

Currency Project Engineer. Currency: 15.

Posts reviewed at the request of departments with no agreement on some factor:

Studies Technician. Shopping.

Head of Team Transformed. Paper Factory.

Transformed Helper. Paper Factory.

Officer 1. Head of Machine Flexographic and Finished Machine Equipment. Printing.

Operary Manufacturing PVC Cards. Printing.

UEN's Machinist. Doorbell.

Reviewed posts by claim of their occupants with no agreement on any factor:

The following jobs have not been valued for no agreement on whether or not the claim submitted implies a review of the assessment of the claim, as reflected in the daily minutes:

Quality Essayist. Paper Factory.

Laboratory Essayist. Paper Factory.

International Purchasing Technician. Shopping.

Purchasing Management Technician. Shopping.

Official 1. Multiple Departments.

Official 2. Multiple Departments.

Driver Stores. Paper Factory.

Unused Machinist, Destruction, and Paper Empacy. Paper Factory.

Officer 2. of Telas. Paper Factory.

According to the art. 9 ° of the current Collective Convention, the posts of disagreement will be submitted to arbitration, agreeing that it is the Provincial Inspection of Work who carries it out, accepting both representations the report that the Inspection. These posts are:

Studies Technician. Shopping.

Head of Team Transformed. Paper Factory.

Transformed Helper. Paper Factory.

Officer 1. Head of Machine Flexographic and Finished Machine Equipment. Printing.

Operary Manufacturing PVC Cards. Printing.

UEN's Machinist. Doorbell.

Quality Essayist. Paper Factory.

Laboratory Essayist. Paper Factory.

International Purchasing Technician. Shopping.

Purchasing Management Technician. Shopping.

Official 1. Multiple Departments.

Official 2. Multiple Departments.

Driver Stores. Paper Factory.

Unused Machinist, Destruction, and Paper Empacy. Paper Factory.

Officer 2. of Telas. Paper Factory.

Multiple.

Posts that are integrated into categories listed in the Convention:

Studied the functions performed by the Head of Area, belonging to the Department of Planning, Logistics and Warehouse Stores, has been proven to be integrated into the category of Head of Area B (level 14).

Studied the functions performed by the Administrative Cash Fund, belonging to the Department of Financial Management and the Administrative Officer 2, belonging to the Training Area of the Resource Directorate Humans, both have been found to be in the category of Officer 1. Administrative (level 9).

New Creation Categories:

Head of Automatic Warehouse and Fielate.

Currency Project Engineer.

Categories that disappear:

Legiate and Blanking machines. Paper Factory.

Engomadora Station Machinist. Paper Factory.

Official 2. Instant Lottery Offset Stamp 2 + colors. Doorbell.

Officer 1. Chief of the Rotary Machine Team. Printing.

Official 2. Rotary Machine of Boletos. Printing.

Balas ' Rompedan Machinist. Paper Factory.

Officer 1. Mme Maintenance Machines. Maintenance.

PVC Card Custom Manufacturer-Custom. Printing.

Officer 1. Head of Machine Flexographic Machine 2 + colors. Printing.

Official 2. Flexographic Machine 2 + colors. Printing.

Head of Workshop of 1 Industrial Direction.

Head of Workshop for 2 Industrial Management.

Chief of Store. Planning, Logistics, and Stores.

Aspiring to Non-Titled Technical 1. th Preprint and Currency.

Aspiring to Non-Titled Technical 2. Inprint and Currency.

Non-Titled Technical Applicant 3. Inprint and Currency.

Second Analyst. Laboratory.

Titled First Year's College. Human Resources.

Entitled university of the Second Year. Human Resources.

Personnel Management Technician. Human Resources.

Person relationship and effect date:

The relationship of the staff affected by this review and the dates of application is published internally in the FNMT-RCM's work centers.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the "BOE" as an integral part of the Collective Agreement and with the effects of the aforementioned application dates.

Head of automatic warehouse and felt:

It is the command that, with the necessary knowledge, autonomy, responsibility and command capacity, directs one or more warehouses to obtain the proper reception, control, storage and dispatch of the products entrusted fulfilling the quality objectives established, coordinating and supervising the staff in charge, being responsible for the management, machinery, facilities and security of the administrative, operational, sub-alternate and unskilled personnel in charge; resolving any incident that requires your intervention, expressing itself in English language when necessary. For which you will perform the following functions:

Organization of the service to be provided by the warehouse according to the needs and resources in its charge, proposing or carrying out, where appropriate, the actions that it considers appropriate based on the burdens of each of the substores, transport, priorities, availability of machinery and personnel in charge. Coordination of work carried out by subcontracted enterprises when required.

Management of the human, technical and material resources entrusted to you in order to achieve the objectives marked, in accordance with the standards and needs established by your superiors, collaborating in the elaboration of budget, participating and proposing to its command line projects of new investments or facilities, adequacy of templates, costs, control of stocks, modifying the conditions of the process if necessary and establishing the priorities of the various services.

Monitoring, control and management of warehouse stocks by establishing the necessary inventories. Reverse logistics management. Attention to audits.

Responsibility for the conservation of assigned facilities, machinery, materials and products.

Personnel control, assigning to each worker the roles and responsibilities of their professional category, ensuring the continuity of the service and resolving any incident that occurs in the modification of the personnel, different categories, turnicalities, permissions, overtime, etc.

Monitoring compliance with the existing regulations regarding the prevention of work risks and quality, being responsible for the same and reporting the incidents that occurred. Acting as a preventive resource for monitoring and controlling the operations of jobs in height.

Training of the staff in charge of professional and occupational risk prevention, indicated the correct way of acting and supervising the proper use of the means of protection. Plans and proposes the necessary training courses.

Elaboration of all kinds of reports that are required for your work. Management of computer terminals using the programs prepared for this purpose.

PVC card customization operation:

It is the operator who, with full knowledge of the assigned teams, has the mission of customizing PVC cards. It shall carry out the preparation of the machinery, necessary adjustments, attention to ancillary systems, including control and safety systems, as well as all precise operations in order to obtain the product in accordance with the conditions required. For which you will perform the following functions:

Supply of raw and auxiliary materials, preparation, commissioning and feeding of the equipment in charge, attention to the different processes and resolution of system calls and interference produce during the same.

Loading, commissioning and feeding of machines at your expense and handling of the specific computer application for the continuous process in machine: magnetic band recording, chip customization, printing of cards, embossed embossing printing, paper printing support, thermographic printing by color overlay, card laminate with security measures, laser printing, card inserted, enveloping of the formatted set advertising and pasting the envelope for shipment.

Customizing the support paper for shipping, inserted card and enveloping, on the different machines.

Extraction and qualitative and quantitative verification of production, completing the documents and control forms required in relation to your work, being responsible for a correct quality and production.

Coordinates the work of an Assistant, solving the doubts that may arise in the development of your work.

Performing the entertainment of the machines, resolution of small faults, changing of blades and assembly of spare parts, as well as the cleaning of the same and its area of action, collaborating with the staff of Maintenance in the repairs, whenever required.

Official 2. flexographic machine and finished:

It is the operator who, with sufficient knowledge of his profession and under the coordination of the Officer 1. Chief of the Team, collaborates with this one in all his functions for the printing, cutting, cooling, fitting, labeling and palletizing of the works entrusted to one, two or more colors. For which you will perform the following functions:

Sourcing, preparation and loading of paper, inks and auxiliary materials for the correct operation of the machine, assisting the 1st Team Chief in the necessary adjustments and corrections in the systems of printing and auxiliary, including control and safety, during the run in order to obtain the required quality.

Attention during the spin by resolving the incidents that can occur, warning the Officer 1. First Team Chief if necessary. Removal of the embossed coil.

Sourcing and replenishment of raw materials and attention to the finish line by resolving the incidents that occur. Withdrawal of completed work according to established standards.

Under the guidelines of Officer 1. the Chief Team Officer performs, along with the rest of the envelope, the necessary adjustments, changes of work and cleanliness of all the elements of the machine, auxiliary systems, and its area of action, assisting in the entertainment and repair of breakdowns to Officer 1. Chief of Equipment and maintenance personnel. Removal, where appropriate, from the automatic compaction and paper destruction system bullet.

Replacement of Officer 1. First Team Chief or any member of the endowment during breaks established throughout the working day, maintaining the guidelines marked by this.

Fulfillment of all control forms required for your work.

Currency Project Engineer:

It is the top or assimilated title that, with full knowledge of its profession, initiative and responsibility, has as its mission the complete development of projects or tasks, either autonomously or under the coordination of his immediate superior. He will coordinate the work of his area with the other departments of the F.N.M.T.-R.C.M. that are related to the project. For which you will perform the following functions:

Concepción, definition, drafting and justification of complete projects, whether they are new implementation or modifications of the existing ones, in any field related to products, processes and installations or relative to the application of new technologies or concepts.

Managing and implementing projects in all their aspects, technical and economic, organizing working groups for the development of those and carrying out as many procedures as necessary before companies and organizations They represent the F.N.M.T.-R.C.M. to the same.

Coordination of projects related to projects, between their area and the other departments of the F.N.M.T.-R.C.M. or external companies, as well as the programming, monitoring and control of engineering works.

Participation in working groups carrying out the development or modification of specifications, analyses and studies on productivity improvements, working methods, facilities, machinery, etc., providing technical assistance to the departments and clients that request it.

Coordination, monitoring and analysis of the tests required for the approval of suppliers, drawing up the relevant fitness report.

Tailoring and drafting of technical documentation, specifications, technical specifications, manufacturing and maintenance manuals, grants, etc.

FINAL ACT

Address Representatives:

Ms Marta Bedoya Castro.

D. ª Azucena Barco Rodrigo (advisor).

Workers ' Representatives:

D. Antonio Santiago Morales.

D. Juan Manuel Camara Diaz (advisor).

In Madrid, on 13 May 2011, the members of the Joint Committee on Valuation are meeting, drawing up this final act, where the results of the assessment of the employment positions are collected. First semester of 2007, which were submitted to arbitration of the Provincial Labour Inspectorate.

Posts valued or reviewed at the request of departments posts that do not rise level:

Technical Staff:

Studies Technician. Shopping: 11.

Operational Staff:

Head of Team Transformed. Paper Factory: 9.

Transformed Helper. Paper Factory: 7.

Officer 1st Head of Machine Flexographic and Finished Machine. Printing: 10.

Operary Manufacturing PVC Cards. Printing: 9.

UEN Machinist. Timbre: 9.

Reviewed posts by claim of their occupants who will be reviewed for change of functions:

Technical Staff:

Quality Essayist. Paper Factory.

International Purchasing Technician. Shopping.

Purchasing Management Technician. Shopping.

Administrative Staff.

Official 1. Multiple Departments.

Posts that will not be reviewed for no change of functions:

Technical Staff:

Laboratory Essayist. Paper Factory.

Administrative Staff.

Official 2. Multiple Departments.

Operational Staff:

Driver Stores. Paper Factory.

Unused machine, destruction and paper packaging. Paper Factory.

Officer 2. of Telas. Paper Factory.

Person relationship and effect date:

The staff affected by this review and the dates of application are published internally in the FNMT-RCM's work centers.

All valuations will be applied once the receptive ministerial authorization is obtained and published in the "BOE" as an integral part of the Collective Agreement and with the effects of the aforementioned application dates.

Study Technician:

It is the titled medium or assimilated that, with full knowledge of its profession, autonomy and responsibility, has as its mission the elaboration of all kinds of studies and reports related to its work, providing also support documentary to those areas that need it. For which you will perform the following functions:

Collection of information: accounting memories, catalogues, press news, previous studies, etc.

Extract relevant data, by making, and analyzing the data, using the computer tools available to you.

Analysis of the above data, extracting the conclusions derived from them, and preparing the corresponding study.

With respect to suppliers and competitors, elaboration of studies on specific companies, their economic situation, problems and trends; regarding markets, characteristics of the same, price cycles, estimation of trends, alternative products, studies on the supply of raw materials purchased, as well as compliance with the procurement budget; in relation to products, studies on own products and competition; several.

Provide documentary support to the areas that need it. Elaboration and updating of procedures and working methods, carrying out studies to improve administrative procedures.

Processed team manager:

It is the operator who, with full knowledge of his profession and capacity for coordination and supervision, has the mission of cutting, stucting, engomering and calendering the paper, by handling the assigned machinery, taking care of ancillary systems, including control and safety systems, in accordance with the requirements of quality and production, and carrying out the necessary checks and corrections during the process, in order to obtain the necessary conditions.

Preparation of the machines, checking the correct operation of all its elements, changing of blades, assembly of coils, adjustment of measures, photoelectric cells, centering and tension, packaging and labelling of coils, Machine cart adjustments, presses, counterweights, brakes and their refrigeration, press washing, humidity control and lisura, etc., taking care of the run, taking responsibility for it and carrying out the necessary checks, corrections and annotations for obtaining correct quality and production.

Performing the work and cleaning changes of all machine elements and their performance zones, as well as their entertainment, small breakdown resolution and replacement assembly, helping the maintenance staff in your repairs, whenever required.

Surveillance and control of different machine parameters, sample collection and analysis, and completion of all necessary checks according to established quality control guidelines.

Coordination, distribution and supervision of the work of the Machinists and Helpers who collaborate with him in their duties, guiding them and resolving doubts that may be presented to them during the development of their work and replace them with the rest of the rest of the day.

Completing the forms that are required for the work process that you are assigned to.

Processed helper:

It is the operator who, with sufficient knowledge of his profession and under the supervision of the Machinist and the Head of Team, collaborates with these in all his functions for the cutting, stucting, engomering and calendering of the paper. You will also need to know and make the preparation of stucco and rubber sauces for paper making. For which you will perform the following functions:

Sourcing, removal, weighing, packaging and transport of coils and removal of waste by transferring them to the storage sites established according to their contents. Aid to the driver in the assembly of axes, coils, blades, mechanisms and brake control, collaborating with it in the adjustments, introduction of data in the control panel, as well as in controls necessary to achieve the correct functioning of the Machinery must replace it with the rest of the rest of the working day.

Sourcing of materials for the preparation of sauces, weighing and mixing of products according to the technical information, for which the operating method must be followed with order and accuracy, verification of percentage of solids, pH, viscosity and all the data requested, as well as its tracer and filtering to the corresponding vats, responsible for obtaining a correct quality and production. Entertainment and cleaning of mixer, filters and other utensils.

Collaboration with the drivers in the changes of work, adjustments, splices of paper, resolution of interference, cleaning of the elements of the machines, auxiliary systems, and their area of action, as well as their entertainment, assisting the Maintenance staff in the repairs, as long as it is required.

Surveillance and control of the different parameters assigned to you by the machine, collection and analysis of samples, and carrying out all the necessary checks according to established quality control guidelines.

Filled out of the forms required for the work process that you are assigned to.

Officer 1. Head of flexographic and finished machine equipment:

It is the operator who, with full knowledge of his profession and capacity for coordination can drive any flexographic machine, having to perform the preparation of the machine, the adjustment of the different printing bodies, the assembly and adjustment of plates, rubbers, beds, blades, drying tunnels and finish line, as well as auxiliary systems, including control and safety systems, so that it can print all types of work to one, two or more colors, according to the requirements of the finished product. For which you will perform the following functions:

Preparation of the flexographic machine, making the necessary adjustments and mounting and adjusting plates, giving precise instructions on the preparation and loading of the inks to be used.

Attention during the run by checking the various prints by making the necessary corrections to achieve correct quality and production.

Performing the work changes and tuning the different items, either manually or by selecting the appropriate options from the dashboard.

Preparing and tuning the finish line, monitoring the cutting, cooling, fitting, labeling, palletizing, and compacting and shredding processes, resolving the interferences that occur.

Cleaning all machine elements, auxiliary systems, and their area of action. Realization of the machine's entertainment, solving small breakdowns, and assisting maintenance personnel in repairs whenever required.

Coordination of the operators of their endowment, replacing them during the rest of the day, solving the doubts that may arise. Theoretical-practical training of the staff in charge.

At the request of your superiors, you must report, verbally or in writing, on the machine behavior of the products, filling in the control forms required for your work.

FINAL ACT

Address Representatives:

Ms Marta Bedoya Castro.

D. ª Azucena Barco Rodrigo (advisor).

Workers ' Representatives:

D. Antonio Santiago Morales.

D. Juan Manuel Camara Diaz (advisor).

In Madrid, on 23 May 2011, the members of the Joint Committee on Valuation are meeting, drawing up this final report, which sets out the results of the assessment of the employment positions of the Joint Committee. First half of 2007 pending assessment following the arbitration by the Provincial Labour Inspectorate.

Reviewed posts by claim of their occupants posts that rise level:

Technical Staff:

International Purchasing Technician. Shopping: 12.

Quality Essayist. Paper Factory: 10.

Reviewed posts by claim of their occupants with no agreement on any factor:

Purchasing Management Technician.

Official 1. Multiple Departments.

According to it is collected in the arto. 9 ° of the current Collective Convention, the posts of work in disagreement will be submitted to arbitration, agreeing that it is the Provincial Inspection of Works who carries it out, accepting both representations the report that the Inspection. These posts are:

Purchasing Management Technician.

Official 1. Multiple Departments.

Person relationship and effect date:

The relationship of the staff affected by this review and the dates of application is published internally in the FNMT-RCM centres.

All valuations will be applied once the mandatory ministerial authorization is obtained and published in the "BOE". as an integral part of the Collective Agreement and with the effects of the application dates mentioned above.

International procurement technician:

It is the middle or assimilated title that, with total knowledge, autonomy and responsibility, has as its mission the management, processing and monitoring of the acquisition of goods and/or services of the F.N.M.T.-R.C.M. according to the framework rules and procedures, for which you will have to express yourself in English when necessary. You will need to search for suppliers, request and selection of offers in order to choose the one that best fits the purchase request, having to know the manufacturing processes of the products of the F.N.M.T.-R.C.M. in order to optimize the purchase of raw materials and auxiliary materials involved in their production. For which you will perform the following functions:

Receiving the authorized purchase needs, locating the requested good or service, seeking, if necessary, other suppliers in addition to the usual with all the means at your disposal, in order to attend to purchase requests.

Search for new national and international markets or suppliers. Negotiation of bids for the implementation of award proposals. Verification of the supply capacity, quality control at the supplier's account by moving to its facilities if necessary.

Request for offers to the various suppliers, reception and analysis of the same proposing to its immediate superior the most suitable in function of the most economical offer, urgency of the delivery, specifications of technical conditions or guidelines received. Reporting to start the approval process, completing the necessary paperwork in case of modifications.

Resolution of all types of incidents related to managing and processing orders.

Personal, telephone, or other contact with the different parts of the process about the status and situation of the orders, managing and tracking any incident related to them.

Collaboration with the FNMT-RCM Departments in the approval processes and advice to them on any element that improves manufacturing processes.

Performing administrative tasks, writing, typing and archiving documentation, printed and reports related to your work. Introduction, obtaining or modifying data using the computer tools available to you.

Quality Essayist:

It is the technician who, with sufficient knowledge of his profession, has as mission the analysis of components and behavior of materials or products that are carried out in a normal way. It shall carry out the analyses, preparations, tests, quality controls and sampling or data following guidelines marked by its superiors, taking responsibility for the correct execution of its work in accordance with the rules and procedures established. For which you will perform the following functions:

Sampling, chemical analysis and physico-chemical tests on the composition and behaviour of raw materials and auxiliaries, as well as manufacturing products that are at any stage of the process or finished, communicating to the person responsible for any failure in order to proceed with its correction.

Collaboration with the Laboratory staff in specific Quality System studies, participating in their monitoring and in the continuous improvement of the same. It also performs cross-comparisons of own test results with results from other laboratories or clients.

Contrast, calibration and entertainment of the devices used in the Laboratory, as well as the measurement and continuous control equipment of the production process, collaborating if necessary with the personnel assigned to them maintenance.

Checking of dimensional characteristics and presence of security elements in paper samples, collaborating with their immediate superior in the approval of the same. Sorts the rejected paper during the production process and labels the valid product, filling in the control forms.

Performing administrative tasks, writing, typing and archiving documentation, printed and reports related to your work. Introduction, obtaining or modifying data using the computer tools available to you.