Key Benefits:
In compliance with the provisions of Article 11 (f) of the Infrastructure Regulation for Industrial Quality and Safety, approved by Royal Decree 2200/1995 of 28 December 1995 ("BOE" of 6 February 1996), and having regard to the standards developed by the European Standards for Standardisation CEN, CENELEC, ETSI and whose national transposition corresponds to the Spanish Association for Standardisation and Certification (AENOR), an entity designated by the Order of the Ministry of Industry and Energy of 26 February 1986, in accordance with Royal Decree 1614/1985 of 1 August 1985, and recognised for the purposes of the additional provision of Royal Decree 2200/1995 of 28 December
,Having regard to the procedure for the elaboration of European standards, in accordance with paragraph 11.2.6.4 of the common rules of CEN/CENELEC and 13.7 of the rules of procedure of ETSI for the standardisation work of those mentioned European bodies,
This Directorate General has resolved to publish in the "Official State Gazette" the list of European standards to which the Spanish standard range has been granted during the month of June 2012 identified by its title and code numerical, indicating their date of availability, as set out in the Annex to this Resolution.
Madrid, July 3, 2012. -Director General of Industry and Small and Medium Enterprises, Manuel Valle Muñoz.
ANNEX
Ratification of European rules. June 2012
Title | F. Availb. | Anula | |
---|---|---|---|
13749:2011 | Railway Applications. Mounted axles and bogies. Methods for specifying the structural requirements of the bogie racks. | 2011-03-30 | UNE-EN 13749:2006 |
50441-1:2012 | Cables for indoor residential telecommunications installations. Part 1: Unshielded tables. Grade 1. | 2012-03-09 |
|
50441-2:2012 | Cables for indoor residential telecommunications installations. Part 2: Shielded tables. Grade 1. | 2012-03-09 |
|
50441-4:2012 | Cables for indoor residential telecommunications installations. Part 4: Cables up to 1 200 MHz. Grade 3. | 2012-03-09 |
|
60297-3-107:2012 | Mechanical structures for electronic equipment. Dimensions of the mechanical structures of the 482.6 mm series (19 inches). Part 3-107: Dimensions of sub-frames and pluggable units, small form factor. | 2012-03-16 |
|
EN 60384-2:2012 | Fixed connectors for use in electronic equipment. Part 2: Intermediate specification. Continuous stream capacitors with dielectrics with fixed metallized polyethylene-terephthalate film. | 2012-03-30 |
|
60384-13:2012 | Fixed densers for use in electronic equipment. Part 13: Intermediate specification: Polypropyl dielectric film metal sheet c.c. condensers. | 2012-03-30 |
|
60384-21:2012 | Fixed densers for use in electronic equipment. Part 21: Intermediate specification: Ceramic dielectric condensers mounted on multi-layer fixed surfaces, Class 1. | 2012-03-30 |
|
60384-22:2012 | Fixed densers for use in electronic equipment. Part 22: Intermediate specification: Ceramic dielectric condensers mounted on multi-layer fixed surfaces, Class 2. | 2012-03-30 |
|
60731:2012 | Electromedical Equipment. Ionization chamber dosimeters used in radiotherapy. | 2012-04-06 |
|
60747-15:2012 | Semiconductor devices. Discrete devices. Part 15: Isolated semiconductor power devices. | 2012-03-16 |
|
61217:2012 | Equipment used in radiotherapy. Coordinates, moves, and scales. | 2012-04-13 |
|
61291-2:2012 |
Optical Amplifiers. Part 2: Digital applications. Operating specification template. | 2012-03-09 |
|
61340-4-4:2012 | Electrostatic. Part 4-4: Standard test methods for specific applications. Electrostatic classification of flexible multipurpose containers for bulk products (FIBC) | 2012-03-23 |
|
EN 61587-1:2012 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 1: Environmental requirements and tests, security aspects for cabinets, racks, sub-racks and chassis. | 2012-03-16 |
|
61784-5-2:2012 | Industrial communication networks. Profiles. Part 5-2: Installing fieldbus. Installation profiles for CPF 2. | 2012-04-20 |
|
61784-5-3:2012 |
Industrial communication networks. Profiles. Part 5-3: Installing fieldbus. Installation profiles for CPF 3. | 2012-04-20 |
|
61784-5-4:2012 |
Industrial communication networks. Profiles. Part 5-4: Installing fieldbus. Installation profiles for CPF 4. | 2012-04-20 |
|
61784-5-6:2012 |
Industrial communication networks. Profiles. Part 5-6: Installing fieldbus. Installation profiles for CPF 6. | 2012-04-20 |
|
61784-5-10:2012 |
Industrial communication networks. Profiles. Part 5-10: Installation of fieldbus. Installation profiles for CPF 10. | 2012-04-20 |
|
61784-5-11:2012 |
Industrial communication networks. Profiles. Part 5-11: Installation of fieldbus. Installation profiles for CPF 11. | 2012-04-20 |
|
61784-5-12:2012 |
Industrial communication networks. Profiles. Part 5-12: Installation of fieldbus. Installation profiles for CPF 12. | 2012-04-20 |
|
61784-5-14:2012 |
Industrial communication networks. Profiles. Part 5-14: Installation of fieldbus. Installation profiles for CPF 14. | 2012-04-20 |
|
61784-5-15:2012 |
Industrial communication networks. Profiles. Part 5-15: Installation of fieldbus. Installation profiles for CPF 15. | 2012-04-20 |
|
61915 -2:2012 |
Low voltage parking. Representation of industrial devices in network (device profiles). Part 2: Root device profiles for starters and analog equipment. | 2012-03-09 |
|
61988-2-1:2012 | Plasma screen panels. Part 2-1: Methods of measurement. Optical and optoelectric. | 2012-03-09 |
|
62047-9:2011 | Semiconductors devices. Micro-electromechanical devices. Part 9: Measure of wafer-to-wafer attachment for NEMS. | 2011-08-19 |
|
EN 62047-13:2012 | Semiconductors devices. Micro-electromechanical devices. Part 13: Methods of measuring the adhesive resistance type test to curving and shearing for MEMS structures. | 2012-04-06 |
|
62047-14:2012 | Semiconductor devices. Microelectromechanical devices. Part 14: Method of measuring the limit of formation of metal film materials. | 2012-04-06 |
|
ON 62264-5:2012 | Integration of enterprise control systems. Part 5: Business Transactions to Manufacturing. | 2012-03-23 |
|
62337:2012 | Puesta in service of electrical instrumentation and control systems in the process industry. Specific phases and stages. | 2012-04-13 |
|
62341-6-2:2012 | Organic light emitting diode devices. Part 6-2: Methods of measuring visual quality and environmental behavior. | 2012-03-30 |
|
62381:2012 | Automation Systems in Industrial Processes. Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT). | 2012-04-13 |
|
62439-4:2010/A1:2012 | Industrial communication networks. High availability automation networks. Part 4: Network redundancy protocol (CRP). | 2012-04-13 |
|
62439-7:2012 | Industrial communication networks. High availability automation networks. Part 7: Redundancy Protocol for Ring Networks (RRP). | 2012-03-16 |
|
62639:2012 | Induction fluorescent lamps. Operating requirements. | 2012-04-20 |
|
ISO 9906:2012 | Rotodynamic Bombs. Tests of hydraulic performance of acceptance. Levels 1, 2, and 3 (ISO 9906:2012). | 2012-05-01 | EN ISO 9906:1999 |
ISO/IEC 19762-1:2012 | Information technologies. Automatic identification and data capture (AIDC) techniques. Harmonised vocabulary. Part 1: General terms relating to AIDC (ISO/IEC 19762-1:2008). | 2012-04-18 |
|
ISO/IEC 19762-3:2012 | Information technologies. Automatic identification and data capture (AIDC) techniques. Harmonised vocabulary. Part 3: Radio Frequency Identification (RFID) (ISO/IEC 19762-3:2008). | 2012-04-18 |
|