Key Benefits:
Arrangements for the approval for the production and issue of blank registration plates
The Minister of Transport and Water,
Having regard to the Articles 40, 3rd paragraph , 70 a, third member , 70 b, second and sixth members , 70 d, 1st and 2nd Member , and 70 e, third member, of the Road Traffic Act 1994 ;
Decision:
The following definitions shall apply:
a. Recognition: recognition as intended in Article 70a, first paragraph, of the Road Traffic Act 1994 for the production and delivery of blank registration records;
b. Approval holder: Holder of a recognition as referred to in Article 70a, first paragraph, of the Road Traffic Act 1994 for the production and delivery of blank registration records;
c. blank-registration plate: blank-registration plate, suitable for the production of a registration plate;
d. Lamination marking: the mark to be brought to the blank registration plate by the laminator, in accordance with the model in the Annex to the Arrangement and registration plates;
(e) laminating code: the number to be added by the laminearlier on a blank registration plate according to model E in the Annex to the Conditions of Plates And Plates, to which each licence plate can be identified;
f. production means the processing of film and other raw material into a blank registration plate, including the affixing of the lamination mark, the laminating code and the hologram;
g. production site: establishment in which production takes place;
h. Fog manufacturer: holder of a recognition as intended Article 70a of the Act for the production and delivery of foil;
i. foil: foil coming from a foil manufacturer and suitable for the production of:
1 °. yellow number plates according to models 1.1 to 18.2E, 27.1A to 27.2G, 27.10A to 27.10E and 30.1A to 30.2D of the Annex to the Arrangement and registration plates;
2 °. Light blue number plates according to models 18.2A to 18.2E, 27.30A to 27.31E and 30.3A to 30.4D of the Annex to the Conditions of Plates And Plates;
3 ° light-green number plates according to models 27.11 to 27.14, 30.5 and 30.6 of the Annex to the Conditions of Plates And Plates;
4 °, white number plates according to models 27.15A to 27.17E, 27.24A to 27.26E, 30.7, 30.8 and 30.13 to 30.16 of the Annex to the Arrangement and registration plates;
j. registration plate manufacturer: holder of a recognition as intended Article 70a of the Act For the production and issue of registration plates;
k. Manufacturer's health mark: a mark to be brought by the manufacturer of the registration plate in accordance with the model in the Annex to the Conditions of Plates And Plates;
L. licence plate: plate as intended Article 70a of the Act ;
m. the Minister: the Minister of Infrastructure and the Environment;
n. Act: Road Traffic Act 1994 ;
o. hologram: hologram as set out in model F of the Annex to the Arrangement of the Plates And Plates.
2 For the purpose of applying this system, enclosed spaces situated in one building or in several places of loading or near-loading buildings, in which the same approval holder manufactures blank registration plates, shall be part of one building. production site.
1 A recognition may be granted to a natural or legal person who is an operator of a place of production established in the European Union or in a State party to the Treaty on the European Economic Area.
2 For each production site, only one recognition shall be issued.
3 A recognition may be granted only in respect of a place of production situated in the European Union or in a State party to the Treaty on European Economic Area, which complies with the requirements of the Article 3 requirements.
1 The production process is in a covered and properly closed and well-lit space that is equipped with appropriate heating. In this room there is a lockable cabinet or an equivalent device, in which raw material and blank registration plates, including unapproved blank registration plates, can be kept locked and separated.
2 There must be a room in which the administration is intended to be Article 20 Can be fed.
The application for approval shall be made use of a form established by the Road Administration.
The applicant for recognition shall submit to the application the following documents:
a. A certificate of registration as intended in the Commercial register law 1996 , or, in the case of establishment outside the Netherlands, an equivalent document issued in the country of establishment, showing that a company manufactures blank registration plates, which must not be older than one month; and
b. A test report of a research institution designated by the Road Traffic Service, showing that the applicant can produce blank registration plates, which meet the requirements, stated in the Licence plates and registration plates and the Requirements for approval of registration plates 2000 .
1 When applying for approval, an organogram shall be submitted, indicating at least:
a. the functions within which responsibility is borne for compliance with the requirements in the Articles 14 to 20 and of the general conditions for process control;
b. the persons responsible for compliance with the rules in the Articles 14 to 20 and of the general conditions for process control; and
(c) alternates of the persons referred to in (b), unless it is established that the work in question is not carried out in the absence of one or more of these persons.
2 A description of the procedures relating to: compliance with the rules in the Articles 14 to 20 and of the general conditions for process control.
The applicant for approval shall have electronic data communications equipment approved for the recognition by the Road Service, suitable for communication in a network accepted by the Road Traffic Service.
If recognition has previously been granted to the applicant, who has been granted recognition under Article 70d of the Act has been withdrawn, may, without prejudice to the provisions of Article 70 d, third paragraph, of the Act , by the Road Traffic Service are determined from parts of Chapter 3 may be deviated.
Changes in respect of the Article 6 The organisational structure, responsibilities and procedures described shall be notified in advance to the Road Administration, as well as any other changes that may be relevant to the recognition. The instructions given by the Traffic Service shall be taken into account.
1 The approval holder shall ensure that the treatment of foil and blank registration plates is carried out in such a way that damage or deterioration is prevented. Care shall extend to and including the delivery of the blank registration plates at the place of destination.
2 Pending use or delivery, the approval holder shall use designated lockable storage or control spaces to prevent damage, theft or deterioration of foil and blank registration plates.
3 The recognition holder prevents unintended use of foil and blank registration plates.
4 In the case of theft of blank registration plates, the approval holder shall immediately inform the Traffic Department of the situation.
1 In the place of production for which recognition has been granted, the decision of the Road Administration, which has granted such recognition, shall be present.
2 To the manufacturer of the registration plate, to whom the recognition holder supplies blank registration plates, or to the producers supplying the foil to the approval holder, the approval holder shall, at the request of the holder, submit the decision referred to in the first paragraph to this Regulation. Access.
A place of production for which approval is granted must continue to comply with the requirements of the Articles 2 and 3 requirements.
The recognition holder shall be responsible for ensuring that the personnel involved in the production and delivery are aware of the requirements applicable to production and delivery.
The approval holder must be able to indicate at all times where the film, holograms and blank-kentench plates, which have not yet been delivered, are in receipt of their delivery.
1 The recognition holder shall make the production subject to compliance with the conditions laid down in the Annex. Licence plates and registration plates and the Requirements for approval of registration plates 2000 .
2 The manufacture of blank registration plates shall only take place in the production sites for which recognition has been granted.
The recognition holder shall only receive a film bearing the mark to be made by the foil manufacturer and accompanied by a document from the foils manufacturer which shall contain at least the following information:
a. Name and address of the foil-manufacturer;
b. Date of delivery; and
c. quantity and kind of foil, broken down by colour and model.
1 The following shall be determined by means of an input control, before production, that the film is:
a. meets the requirements of the Requirements for approval of registration plates 2000 , to the extent that they apply;
b. is provided with the mark to be made by the foil manufacturer, if that is required; and
c. is undamaged.
2 An input control report shall be drawn up, which shall contain in any case:
a. the name and address of the foaming manufacturer concerned;
b. the quantity and type of foil, broken down by colour and model;
c. the date of delivery,
d. a reference to the in Article 15 the said document,
e. the signature by the officer responsible for the effective control; and
f. The date of the entry check.
3 Foil in which no input check has yet taken place should be clearly recognised as such because it is stored separately.
1 The approval holder shall be foil, which shall not be the one in the First paragraph of Article 16 shall comply with the requirements set out in the terstondon, or return it to the folover manufacturer.
2 If the approval holder returns the film, the film shall be accompanied by a document, which shall indicate:
a. the quantity and type of foil, broken down by colour and model;
b. the date of delivery;
c. a reference to the in Article 15 the said document;
(d) the signature by the official responsible for the effective control;
e. the date of the entry check; and
f. the reason of disapproval.
A copy of the document referred to in paragraph 2 shall be kept.
4 In the case referred to in paragraph 2, the recognition holder of the folover manufacturer shall request a receipt.
5 If the approval holder destroes the unapproved film, a report shall be drawn up and kept, which shall contain at least:
a. the name and address of the foaming manufacturer concerned;
b. the quantity and type of foil, broken down by colour and model;
c. the date of delivery;
d. a reference to the in Article 15 the said document;
e. the signature by the officer responsible for the effective control;
e. the date of the entry check; and
f. the reason of disapproval.
1 Before the holder of the approval is transferred to the delivery of blank registration plates, he or she shall check that they comply with the registration and registration plates and the registration plates in the Regulations. Requirements for approval of registration plates 2000 shall bear the mark to be made by the approval holder, if it is required to do so.
2 Blank-registration plates which do not meet the requirements shall be destroyed immediately. The destruction shall be drawn up and kept in accordance with, in any case, the following particulars of the registration plate:
a. The laminate code if it is required;
b. The model and colour of the blank registration plate; and
c. The name and address of the manufacturer of the film.
1-Blank-licence plates shall be issued only to approved registration plate manufacturers.
2 Prior to the supply of blank registration plates fitted with a laminate code, the approval holder shall report to the Road Administration on the basis of the form to be determined by this service:
a. The lamination codes;
b. The quantity of blank registration plate;
c. The type, colour and model of the blank registration plate;
d. The registration plate manufacturer to whom the blank registration plates are to be supplied.
3 Without prejudice Article 20a , a recognition parent may not receive any undelivered blank registration plates.
1 The recognition holder shall carry out an orderly administration which shall contain:
a. the documents referred to in Article 15 ;
b. The reports of the input control, referred to in Article 16, second paragraph ;
c. The copies of the headings Article 17, third paragraph ;
d. Receipt confirmations as referred to in Article 17, fourth paragraph ;
e. the reports referred to in Article 17, fifth paragraph ;
f. the reports referred to in Article 18, second paragraph .
2 The documents referred to in paragraph 1 shall be kept for two years.
1 By way of derogation from Article 19 The recognition holder may supply blank number plates to another recognition holder. These blanks are marked with the hologram, if any, and the mark of the approval holder supplying the plates, with the hologram being supplied.
2 The blank registration plates shall, if a lamination code is required, be supplied by the recognition holder supplying the approval holder with the approval holder's laminating code to whom it is supplied.
3 The recognition holder who supplies shall register with the delivery:
a. The quantity and type of blank registration plates, broken down by colour and model;
b. The lamination codes, if a laminating code is required;
c. the date of delivery;
d. the name and address of the recognition holder to whom has been supplied; and
e. the name and signature of the officer responsible for the delivery.
4 The registration, as referred to in paragraph 3, shall be kept for two years at the place of production.
1 The recognition holder who has been supplied blank registration plates with application of Article 20a , at the time of receipt of such registration plates, register:
a. the data referred to in Article 20a, third paragraph, points a, b and c , and
b. The name and address of the recognition holder who has delivered.
2 The recognition holder to whom the blank registration plates have been supplied shall not be allowed to use it Article 20a forwarding to a different recognition holder.
3 The registration, referred to in paragraph 1, shall be kept at the place of production for a period of two years.
1 After recognition is given by the officials of the Traffic Department designated for that purpose, regular or random checks shall be carried out on the recognition of the approval holder and the place of production at the time of approval. Chapter 2 Recognition requirements, and whether the Chapter 4 Recognition rules and other rules laid down in or pursuant to the Act are complied with.
2 All cooperation shall be granted by the recognition holder. In any case, all cooperation shall mean that:
a. The responsible officers of the recognition holder or their alternates are present at the control; and
b. Actual assistance shall be provided in the performance of the verification.
The instructions given by the Road Service shall be taken into account.
3 The surveillance may also mean that the Traffic Service requires the approval holder to make available a part of the film taken by the approval holder, or for one or more of the film received by the Service. Road traffic to indicate the blank-registration plates to produce a test report of a research institution designated by the Road Administration which shows that the registration plates meet the requirements laid down in the Annex Licence plates and registration plates and the Requirements for approval of registration plates 2000 .
1 A on the day preceding the date of entry into force of the Law of 6 October 1999 amending the Road Traffic Act 1994 relating to the issue and ingestion of registration plates (Stb.1999, 459) approving or authorising the affixing of a label to blank registration plates and the rules applicable to them on that day shall remain in force until 1 February 2003 with regard to blank registration plates For registration plates according to models 1.1 to 26.1 of the Annex to the Conditions of registration of registration plates and number plates.
2 An approval or authorisation referred to in paragraph 1 shall expire from the day on which recognition is granted to the person, to whom the approval or authorisation was issued.
This arrangement shall enter into force from the day on which the Law of 6 October 1999 amending the Directive is to be amended. Road Traffic Act 1994 In relation to the issue and intakes of registration plates (Staatsblad 1999, 459) enters into force.
This scheme is cited as: Accreditation scheme (laminers).
This arrangement shall be entered in the Official Journal.
TheMinister
of Vertimes and Waterstate,T. Netelenbos
