Pursuant to article 1. 2 (2). (5) and article. 12(3). (2) of the law on metrology of nr. 647-XIII of 17 November 1995 (republished in the Official Gazette of the Republic of Moldova, Special Edition on April 15, 2008), with amendments and additions thereto, taking into consideration the recommendation of the National Council for Metrology (Protocol No. 4 of 10 November 2015), in order to ensure uniformity, accuracy and legality of measurements in the Republic of Moldova, ORDON: 1. Approving the amendments shall be made in the "official list of measuring instruments subject to legal metrological control" approved by the decision of the Department of standardization and Metrology No. 1445-January 4, 2004, with subsequent amendments and additions (republished in the Official Gazette of the Republic of Moldova No. 2014, 325-332, 1506), annex.
2. Publish this order in the Gazette of the Republic of Moldova and on the website of the Ministry of economy.
3. To transmit this order National Metrology Institute for placement on the website and publication in the magazine "Metrology".
Deputy Prime Minister and Minister of economy Stephane Christophe No. 172 CLAMPS. Chisinau, November 17, 2015.
The Economy Ministry Annex nr. 17.11.2015 changes to 172 from "official list of measuring instruments subject to legal metrological control" 1. In Chapter 2, "Note" is excluded.
2. in Chapter 3 "Sizes of flow of substances", section 3.1: a) 3.1.1 is amended position and shall read as follows: 3.1.1
Flowmeter (including strangulation device) for liquids-liquid, gas, steam
I, VI, VP
b) 3.1.2 position is amended and shall read as follows: 3.1.2
Computers for counters of heat
I, VI, VP
Pairs of temperature sensors for heat meters
Flow sensors for heat meters
c) after the heading "Note" is 3.1 exclude.
3. In Chapter 4 "Pressure": a) to the position of 4.6 ' (see section 3.1.3) Transferred item 3.1.4 "shall be replaced with the words" (see heading 3.1.3);
b) to "Note", the words "(see section 3.1.4)" shall be replaced with the words "(see heading 3.1.3)".
4. in Chapter 6, "Thermometry": the name is changed) and shall read as follows: "Sizes in the field of termometriei";
b) "Note" is amended and shall read as follows: "Termorezistenţele that are part of the composition of corectoarelor electronic gas volume have the maximum period equal to the period of maximum verification verification of corectoarelor electronic gas volume (see 4.6 position)."
5. in chapter 13 "Note" is excluded.