Cabinet of Ministers Regulations No. 538 Riga, June 17, 2009 (pr. No 43 17) tank vehicles for the transport of dangerous goods issued by technical supervision procedures in accordance with the law "on technical supervision of dangerous equipment" 3. the second paragraph of article i. General questions 1. establishes the requirements to be met by organizing and taking jobs with fixed tanks (tank-vehicles), removable tanks, tank, portable tanks, with a vacuum-operated waste tanks or other containers, defined in the European Agreement concerning the international carriage of dangerous goods by road (ADR Agreement) , 1, 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 or 9. class of hazardous substances for transport by road (hereinafter referred to as the tank), as well as tank technical supervision procedures. 2. the rules shall not apply to: 2.1 class 2 (according to the classification of the ADR Agreement) intended for the carriage of dangerous substances in containers, tank, gas containers, multi-chip battery-vehicles, pressure and aerosol dispensers;
2.2. vehicle engine powered tanks and containers for autonomous vehicle heating (cooling) systems. 3. Tank first inspection and technical inspections shall be carried out in a company with limited liability "the standardization, accreditation and Metrology Centre ' to the standard LVS EN ISO/IEC 17020:2005" the main criteria for the different types of institutions that conduct inspections "accredited institution, for which the economic Ministry has published a notice in the newspaper" Gazette "(hereinafter referred to as the inspection authority). 4. Use only containers that have been registered in the register of dangerous equipment and have undergone technical inspection in accordance with the procedure laid down in these rules, to the extent set out in the ADR Agreement and in accordance with the periodicity of the ADR Agreement. 5. for each tank required tanks passports (annex 1) and the tank of technical documentation (annex 2) national language. Tank inspection bodies shall be issued passports by the registration or reregistration of the tank hazardous equipment in the register in accordance with the regulations on the registration of dangerous equipment. Tanks draw up technical documentation tanks possessor (hereinafter possessor). 6. Possessor provides all of the necessary measures to comply with these regulations, the tank requirements, and shall ensure that the following requirements are met: 6.1. tanks used according to the purpose specified by the manufacturer;
6.2. the tank make up according to the manufacturer's instructions and regulations on the transport of dangerous goods;
6.3. the tank is serviceable and properly maintained (including in the appropriate colour);
6.4. the tank is tested periodically according to the requirements of the ADR Agreement. 7. the possessor of tanks in the technical documentation shall document the particulars of tank repairs and carried out technical inspections, as well as stored and ensure the availability of this document supervisory and control bodies and inspection authorities, while the tank is in use, as well as at least 15 months after termination of the use of tanks. 8. the possessor shall ensure tanks are a first for verification pursuant to this provision the requirements laid down in chapter II, as well as the following tanks: technical inspections 8.1. initial verification;
8.2. leakage test (mid-term review);
8.3. periodic inspection;
8.4. the extraordinary inspection. 9. the inspection body shall draw up and issue a test report for each tank technical inspections regardless of the results (positive or negative) and type. The data for each of the technical inspection of the tank inspection institution enter in the register of hazardous installations. 10. the possessor and the inspection body in the inspection reports, while the tank is in use. II. preliminary inspection of the tank 11. tanks first test is carried out before the commencement of the use of tanks and the registration in the register of dangerous equipment regulations for registration of dangerous equipment. 12. to make the first inspection of the tank before its registration in the register of hazardous installations, the possessor of the inspection body, turning previously agreeing on inspection time and place. 13. the tanks first inspection, the inspection body shall check the tanks specified in technical documentation data in actual tank data and determine the extent of the necessary inspection according to the ADR Agreement. 14. If, before registration of the hazardous equipment in the tank record holder show existing test results (Protocol) on the conformity of the agreement ADR tank requirements, consider that the tank technical inspection in accordance with the requirements of the ADR Agreement is carried out in the country concerned, and the technical inspection of the tank (initial inspection, periodic inspection, or tightness check) is not made. 15. tanks a first examination findings about tank inspection institution enters the dangerous equipment in the register and issue a passport holder vats. 16. If the tanks first examination shows deficiencies proprietors to corrects and redo verification inspection institution. III. initial testing of the tank 17. tanks initial verification shall be carried out in order to verify the compliance of each tanker ADR Agreement laid down in konstruktīvaj, technical and security requirements. 18. the initial check of the tank volumes and conditions are set out in the ADR Agreement. 19. tanks initial tests results for the inspection authority collects check Protocol. Checklist of inspection are presented in two copies, of which one copy shall be handed to the possessor, but other stores in its archives. 20. If the tanks during the initial check is found defective, it prevents the possessor and redo verification inspection institution. IV. Tank tightness testing (mid-term review) 21. Tank tightness test is conducted in order to verify compliance with the ADR Agreement of tanks in technical and safety requirements in relation to the tightness of the tank and all the safe operation of the equipment. 22. Tank tightness testing volume, frequency, and conditions are set out in the ADR Agreement. 23. to check the tightness of the tank, the possessor of the inspection bodies and the draws shall agree on the time and place of the inspection. 24. the tanks leak test results for the inspection authority collects check Protocol. Checklist of inspection are presented in two copies, of which one copy shall be handed to the possessor, but other stores in its archives. 25. If tank tightness test is found defective, it prevents the possessor and redo verification inspection institution. V. tank 26. periodic inspection periodic inspection of Tanks performed to verify compliance with the ADR tanks each agreement in technical and safety requirements. 27. periodic inspection of the tank volume, frequency, and conditions are set out in the ADR Agreement. 28. in order to carry out periodic inspection of tanks, the possessor of the inspection body, turning a previously agreed time and place of the inspection. 29. Tank for periodic inspection results for the inspection authority collects check Protocol. Checklist of inspection are presented in two copies, of which one copy shall be handed to the possessor, but other stores in its archives. 30. If the periodic inspection of tanks is found defective, it prevents the possessor and redo verification inspection institution. Vi. extraordinary examination of the tank 31. tanks extraordinary verification shall be carried out in order to verify its conformity with the requirements of the ADR Agreement in technical and safety requirements in the following cases: 31.1. tank suffered a road accident, and with it lost force in the previous test report;
31.2. tanker repairs carried out or components or equipment replacement, which may affect the safety of the tank or conform to the approved type;

19.4. monitoring and control institution reasonably suspects the presence that the tank does not meet the requirements of the ADR Agreement in technical and safety requirements. 32. extraordinary examination of the tank volume is determined by the inspection body, depending on tank damage and repairs carried out. 33. to perform extraordinary inspection of the tank by means of the inspection bodies and turn to agree the time and place of the inspection. 34. extraordinary examination of the tank results compiled test report. Checklist of inspection are presented in two copies, of which one copy shall be handed to the possessor, but other stores in its archives. 35. If the tanks are extraordinary shortcomings are found on inspection, it prevents and carried out by means of repeated inspection inspection institution. VII. monitoring and control Tanks 36. supervision and control of the tank according to the competence of a public būvinspekcij, road safety, road transport inspection Directorate and other regulations on procedures for the control of road transport in certain institutions. VIII. Closing questions 37. Tanks, which have carried out a technical inspection in accordance with the Cabinet of Ministers of 18 June 2002, the Regulation No 234 "rules on transportable pressure-equipment", a first technical inspection shall be performed to the date of validity of the protocol issued checks. 38. The tanks, which registered in the register of dangerous equipment as appropriate cabinet June 18, 2002 regulations No 234 "rules on transportable pressure equipment directive of the" renewal of conformity with the requirements laid down in these provisions made to date, when this rule is in force, paragraph 37 of the report. 39. Until 1 July 2010 for first-time inspection and technical inspection in accordance with the requirements of these regulations in addition to the provisions referred to in paragraph 3, the inspection body may carry out inspection bodies which carry out technical inspection of the tank under the Cabinet of Ministers of 18 June 2002, the Regulation No 234 "rules on transportable pressure equipment. 40. The tanks, which up to this date of entry into force of the provisions of the hazardous installations are registered in the register and which is drawn tanks passport under the Cabinet of Ministers of 18 June 2002, the Regulation No 234 "rules on transportable pressure equipment directive for", this provision in annex 2 is not that technical documentation-planted while go out possessor provides prebuilt passports. 41. the rules shall enter into force on July 1, 2009. Prime Minister, Minister of finance e. Repše economic Minister a. camphor annex 1 Cabinet of 17 June 2009. Regulations No 538 tanks Passport 1. dangerous equipment to tank 2. Registration number in the register of hazardous installations 3. Date of registration in the register of dangerous equipment by means of 4 5 address 6. Tank Holder type 7. type-approval number 8. Manufacturer name 9. manufacturer's assigned number 10. Year of manufacture 11. Tank-code Tank capacity 12 13. Test pressure 14. Allowable Working pressure 15. Permissible working temperature 16.
17. Special conditions other information 18. Signature and stamp A. Economic Minister camphor annex 2 Cabinet of 17 June 2009. Regulations No 538 tanks technical documentation (cover) the name of the news on the tank tank repairs carried out and technical inspection (first page) name of the manufacturer, the country where the tank made tanks are name, type, model, manufacturer's number of tanks assigned tank manufacturing month and year (new page) i. General information 1 producer and the tanker address 2. tanks possessor and the address (new page). tanks II 3. characteristics of the type-approval number 4. Tank code 5. Substances or groups of substances for the carriage of which the tank is intended 6. Test pressure (s) (manometric) (bar) 7. External design pressure (bar) 8. Tank section, and the total capacity (litres) 9. Operating temperature 10. First month and technical examination date 11. Tank shell material, thickness (body, end walls, partitions, wave suppressors) and reference to materials standards 12. tanks (if applicable) aizsargapšuvum material and reference to materials standards 13. Under pressure-refillable or completely emptied containers – maximum permissible working pressure (bar) 14. list of attached documents tanks possessor, person's title, surname, signature date (new page) III. News on safety devices safety device type and manufacturer's name manufacturer's assigned number installation position the valve cross-sectional area of the flow coefficient, mm2 Opening opening opening opening pressure and pressure ranges bar (new page) IV. Particulars of the shut-off name characteristics nominal aperture in mm nominal pressure work characteristics, Housing material installation position number bar working pressure, working temperature, ° c (new page) v. news about metering, control, signalling and automatic protection equipment Equipment name responsible specialist title, last name, signature of the responsible specialist (new page) VI. Responsible for the technical condition of the tank number and issue date of the responsible specialist title, last name, signature of the responsible specialist (new page) VII. News about the tank repairs , reconstruction, replacement of equipment date description of action taken in the signature of the responsible employee (this chapter provides at least 10 pages).
Note the. Add technical documentation about changes in construction and materials.
(new page) VIII. Report on inspection of tank test date date and number of the protocol type of the result of the test next check date (this chapter provides at least 3 pages).
Note the. Inspection type is denoted by P, if it is original (periodic) verification, and with L if it's tightness check (mid-term review).
(new page) IX. registration of the tank Tanks registered with the register of dangerous equipment No.

The document is _____ _____ _____ _____ _____ _____ _____ ___ numbered pages to the Annex __ _____ _____ _____ _____ _____ pages Document a total of _____ ____ ____ ____ ____ ____ ____ ____ cauršūt sheet Inspection bodies responsible post, signature, printed name date location guidance document X for completion and presentation of annex 1 Add: 1.1. tanks functional scheme; 1.2. tanks exploded view drawing; 1.3. the tank material; 1.4. the tanker technical inspection reports. 2. If necessary, the document is supplemented by other departments. 3. the text of the document presented as a computer printout. 4. Document format is A4.
Economic Minister a. camphor