Cabinet of Ministers Regulations No. 1525 of 2009 in Riga on 22 December (pr. No. 89 103) precious metal stamping products and allowable remedij picked in accordance with the law "on State monitoring of the process" in article 27 (2) of rule 1 defines the precious metal stamping products and residue remedij. 2. the articles of precious metal provēšan and sealing the State limited liability company "Latvian prov's Bureau" (hereinafter the Office). 3. submit articles of precious metal stamping can be both natural and legal persons. Office, assuming the articles for stamping and issuing them back, check the person's identity – an identity card for individuals, identity document and the mandate of the representative of a legal person. 4. the Office may agree with the person submitting the product in the Office and from the Office via postal or courier services. 5. the Person submitting the articles of precious metal for stamping: 5.1 product supposedly metal and fineness, if this information is known to the applicant;
5.2. do articles zīmogojam to the Convention's articles of precious metal For review and stamping a "joint verification stamp;
5.3. desired place of taxation of the stamp and the stamp on the way – mechanical stamping or lāzergravēšan;
5.4. information on the manufacturing characteristics of the products, which should be taken into account in order to avoid damage: 5.4.1. or, products, provēj only rentgenfluoriscenc method;
5.4.2. or mechanically stamping products, possible deformation (e.g., hollow products, products with hidden mechanisms). 6. Precious metal products for stamping submit: 6.1. functionally ready for use (gems can be embedded) and adding all the details. Precious metal products for stamping can submit, if not polished;
6.2. sorted out by metal and product type;
6.3. the containers, which provides product protection against mechanical damage. 7. When adopting articles of precious metal for stamping, Office, present your receipt in duplicate, stating the following: 7.1 the Office properties;
7.2. the applicant's first name, last name and user ID of the person or property of the legal person;
7.3. the precious nature of the products, metal and thought process, count, net and gross weight in grams;
7.4. the fee for prov's works;
7.5. the Office employee's first name, last name and title who received articles of precious metal;
7.6. the date of submission of articles of precious metal;
7.7. natural persons or legal persons first and last name of the representative who submitted the articles of precious metal, or an indication that the products delivered by mail or by courier. 8. Precious metal product receipt with the signature, the applicant confirms that articles of precious metal by the fees (excluding this provision referred to in paragraph 4 of the event), and the Office staff – that it adopted. 9. One copy of the receipt is issued or sent to the applicant, the articles of precious metal and the other a voucher copy kept in the Office. 10. If the precious metal products the applicant alleged metal product receipt is specified by the Office, taking the precious metal products: 10.1. white metal products, of silver;
10.2. yellow and red metal products – for gold;
10.3. Gray metal products-for Platinum or palladium;
10.4. multiple colors of products, the metal its metal products, which has a higher specific gravity;
10.5. If the metal is the same: 10.5.1. products with Platinum or palladium for Platinum-part or palladium;
10.5.2. products with the gold and Platinum or palladium free parts – the gold products. 11. Precious metal product weight determined by weighing it with accuracy 0.1 g. 12. the weight of precious metal products not included: 12.1. product package weight of precious metal;
12.2. articles of precious metal with integrated amber-amber weight if the precious metal used for the frame and amber share precious article is more than 50 percent;
12.3. the ordinary metal components to the weight of gold, Platinum or palladium articles;
12.4 other material (not of precious metal) parts weight, if the proportion of the article is more than 50 percent;
12.5. the weight of precious stones (other than diamonds (diamonds), Emerald, Sapphire and Ruby weight), if their share of the product is more than 50 percent;
12.6. the weight of the metallic coated electrolytic shaped articles of precious metal). 13. This rule 12.2, 12.3, 12.4, 12.5 and 12.6. referred to in articles of precious metal proportion determined by weighing the break zīmogojam or analog products or in accordance with the manufacturer's certificate, if the applicant is of precious metal products supplied by the manufacturer certificate or an identical precious specimen weighing. 14. in order to determine the fees for the work of the precious metal purity products is determined in the following order: 14.1 earring, apročpog or other products across as two products;
14.2. you shall, if they are separable (such as chain and pendant), adopted as separate products. 15. Delivery time: 15.1 if for stamping submit less than 500 articles – five working days;
15.2. If products or for stamping submit 500 more, order deadline determined by agreement with the maker of the article of precious metal;
15.3. the Office is entitled to extend the delivery period if for technical reasons it is not possible to execute the order within the time limit. Maker shall notify the applicant of the precious metal products and agree on the next order deadline. 16. the issue of the precious metal products, zīmogot Office, presented: 16.1. receipt which indicates: 16.1.1. precious metal products, the requested name, or indicate that the products will be delivered by mail or by courier;
16.1.2. the date of issue of the article of precious metal;
16.1.3. the Office, the name and job title, who issued a precious metal articles;
16.2. the test report shall specify: 16.2.1. precious metal fineness specified for the product;
16.2.2. for information on the analysis made;
16.2.3. information on articles of precious metal in the stamps. 17. Office worker with a signature certifying receipt that is issued by the products, precious metal and precious metal preparations, that the payee received it (with the exception of the provisions referred to in paragraph 4 of the event). 18. the Office, in determining the fineness of precious metal alloy products, do not allow negative remedij (with the exception of those rules specified in paragraph 21 of the cases). 19. If the articles of precious metal alloys (precious individual product details) are made of heterogeneous (homogeneous), precious metal articles (precious metal products for the individual component) as a whole should meet the relevant process. 20. in determining product fineness of precious metal alloy, so the weight does not include the following: 20.1. precious metal products not in metallic filling weight (electro-formed products);
20.2. the weight of the metallic coating;
20.3. precious metal non-metallic parts of the product weight;
20.4. the weight of the metal components, which provide precious product mechanical strength, durability or functionality and technologically impossible to replace with precious details;
20.5. lodējam material weight of precious metal products, filigree made from 925. prov prov's silver or higher. 21. Precious metal soldering products used in the process of lodējam of the same material. Lodējam material, which is lower than the process of precious metal articles (precious metal products for individual parts) in the process, you may use only the following technological needs: 21.1. gold alloy, which is higher than 750 prov. prov, may tinker with 750. prov prov lodējam or higher of the material;
21.2. a gold alloy of fineness 750. products and body clock may tinker with 740. prov prov lodējam or higher of the material;
21.3.750. prov's white gold alloy articles may tinker with 585. prov prov's or higher lodējam of material;
21.4.925 silver alloy of fineness of product may tinker with 650 or higher prov prov. of lodējam material;
21.5. silver alloy products, of which the fineness is lower than 925 fineness, can tinker with 550 or higher of prov prov lodējam material;
21.6. Platinum alloy products may tinker with lodējam material containing at least 800 gold, silver, Platinum or palladium from 1000 parts by weight;
21.7. Palladium alloy product may tinker with lodējam material, which contains at least 700 gold, silver, Platinum or palladium from 1000 parts by weight;
21.8. precious ķēdīš stages made of wire with a diameter of less than 1 mm, not be solder with precious lodējam material, but the chain as a whole must have reached a certain stage in the process;

13.6. If the articles of precious metal parts made of various precious metals, they may tinker with lodējam material, which is lower than some fineness in parts lodējam prov. 22. the Office, in determining the product fineness of precious metal or precious metal products through verification of compliance with the product safety requirements, and the type of metal and articles sorted products that count is greater than 100, chemical analysis (LVS EN 1811 + A1:2008 "direct and long contact with the human skin for product etalontestēšan for the detection of nickel release"; LVS EN 12472 + A1:2009 "Covered product wear and corrosion modeling method for the detection of nickel release"; LVS EN ISO Customs: 2006 L ' gold content gold juveliersakausējumo. Method by kupelēšan (hot-determination of the assay) ''; EN EN: 2006 + AC L 31427 "silver content silver juveliersakausējumo. Volumetric (potentiometric) method with potassium bromide) may select no more than 1% of the number of articles. 23. Provēto articles of precious metal is stamped with the Latvian Office of the Authority's stamp or prov prov's stamp. The Office does not stamp the precious product, if it does not correspond to the product safety requirements. 24. articles of precious metal shall be printed on the stamps. If the precious metal product receipt, the applicant has indicated that the stamp printing may damage the precious metal products, precious metal products of the seal engraved. If, for technical reasons, the stamp in an article of precious metal is not possible to print or engrave the precious products of the Office, the applicant shall be issued a certificate of quality articles of precious metal which indicates the fineness of precious metal products for. 25. If the Office products, precious metal or stamping provēj, establishes that the product does not correspond to the product's metal supposedly metal (point 7 of these rules) or to use only the rentgenfluoriscenc provēj method, or possible deformation if the product will be mechanically zīmogot, contact the Office of precious metal products, the applicant shall agree on the provēšan or stamping techniques and presented new voucher for the additional work carried out. 26. the authorities stamp stamp prov precious product: 26.1. which Office stamp with a single stamp of the inspection;
26.2. at the request of the applicant, if the articles of precious metal is provēt and zīmogot is notified of other countries and independent body and if it meets the following conditions: 26.2.1. precious metal content in the article meets the and other independent institutions in the embossing process;
26.2.2. precious metal content in the article meets any of the requirements in the Republic of Latvia audition;
26.2.3. on the product is only one stamp of purity;
26.2.4. other official and independent institutions in the process of stamp is visible and not damaged;
26.2.5. other official and independent authorities prov stamp shows the amount of precious metal weight thousandths;
26.3. for technological reasons, with prov prov's stamp of authority and additional prov stamp combination. 27. the process of With the stamp of the seal of the Republic of Latvia and imported manufactured articles of precious metal. 28. in the process of With additional stamps stamp part of the precious metal products made from the same, but the lower of precious metal fineness: 28.1. precious part of the article is still attached (soldered), but easily distinguishable visually (different color);
28.2. precious metal products are moving. 29. With additional stamp of purity "ME" metal bullion products does not seal if: 29.1. metal part used for technical reasons and visually easy to distinguish;
29.2. the metal part used for technical reasons and it is virtually impossible to seal;
29.3. precious metal product manufacturer is clear and understandable to a product is indicated by the presence of the metal parts. 30. Precious metal products, which is expected to seal the year differences or personal stamp, stamp the applicant prior to the submission of a product in the Office. 31. The stamps to the precious product placed in the following order: 31.1. If possible, prov stamp displayed on most precious product details;
31.2. If possible, additional fineness of the precious metal on the details of the product, to which this seal;
31.3. earrings, apročpog or other products across the stamp each article;
19.5. mutually reconcile products if they are separable (such as chain and pendant) seal each article;
31.5. If precious metal product is made of various precious metal parts, stamped with a number of articles relevant for stamp of purity. If it is not possible to visually easy to distinguish to which detail who apply, the stamp of purity of precious metal articles as follows: stamp products with silver 31.5.1. detail-with corresponding Silver Stamp of purity;
31.5.2. product with gold detail, but without the silver parts-with the appropriate stamp of purity of gold;
19.6. If precious metal product is made from one precious components, of which the smallest details is with a lower purity, then most of the details of the stamp with its corresponding stamp of purity, but the smallest detail – with additional stamp of purity. With additional stamp of the seal not prov if precious metal products are the smallest component of higher purity. 32. articles of precious metal with the stamp of the seal in the process, corresponding to the component with the lowest prov: 32.1. precious metal products has more than one different parts of the process;
32.2. the different parts of the process are soldered visually and not easily distinguishable from the precious metal article for more details. 33. Stamp prints and precious metal articles must not be damaged, and polishing for stamping or otherwise processing them. 34. Be declared unenforceable in the Cabinet of 27 December 2002 Regulation No 595 "articles of precious metal stamping procedures and allowable remedij" (Latvian journal, 2002, nr. 190; 2006, 65, nr. 190). 35. the rules shall enter into force on January 1, 2010. Prime Minister v. dombrovsky Finance Minister e. Morgan