Cabinet of Ministers Regulations No. 492 in Riga on 21 June 2011 (pr. No 39 73) amendments to the Cabinet of Ministers of 18 October 2005, the Regulation No 772 "rules for biofuel quality requirements, conformity assessment, market surveillance and consumer information order" Issued in accordance with article 6 of the law on Biofuels of the second part of article 7 and the second paragraph of the law "on conformity assessment" article 7 do Cabinet of 18 October 2005, the Regulation No 772 "rules for biofuel quality requirements, conformity assessment, market surveillance and consumer information order" (Latvian journal 168., 2005, no.; in 2007, 121. no; 2009, no. 102, 177.) the following amendments: 1. Replace the text, the words and figures "EN EN 590:2004" Amount. Diesel oil. Requirements and test methods "and" EN EN 590:2005 "Amount. Diesel oil. Requirements and test methods "" with the words and figures "EN EN 590 + A1:2011 ' auto/oil. Diesel oil. Requirements and test methods ".
2. Replace the text, the words and figures "EN EN 14214:2005" automotive fuel – of the fatty acid methyl esters (fame) diesel engines-requirements and test methods "" with the words and figures "EN EN 14214 + A1:2011" automotive fuel. Of the fatty acid methyl esters (fame) diesel engines. Requirements and test methods ".
3. Supplement with 2.8 and 2.9 of the subparagraph as follows: "2.8. unleaded petrol containing dehydrated (with an alcoholic strength of at least 99.5% vol.) bioethanol, if absolute alcohol content is 9.5-10% vol. of the total quantities of products;
2.9 diesel (gas oil) (including in temperate conditions, use A, B, C, D, E, F category diesel) containing biodiesel from rape seed oil, 6.5-7% vol. in the amount from the total amount of the finished product. "
4. Express 6.2 point as follows: "this rule 6.2. products referred to in paragraph 2.7 of the quality requirements set out in the standard LVS EN ISO 15403-1:2011" natural gas. Natural gas, used for compressing the amount. Part 1: characterisation of quality (ISO 15403-1:2006) '. "
5. Supplement with 6.3 and 6.4 point as follows: "6.3 these terms 2.8. products referred to in the quality requirements laid down in annex 7 of these rules.
6.4 The provisions referred to in paragraph 2.9. product quality requirements defined in annex 8 of these rules. "
6. To express the point 7 by the following: "7. This provision 2.1., 2.4., 2.5., 2.6., 2.7., 2.8 and 2.9. products referred to in compliance with the quality requirements shall be attested by one of the following documents: 7.1. conformity certificate issued by an accredited conformity assessment body, on which the accreditation notice published in the Gazette" journal "of Latvia or of a Member State of the European Union has announced the European Commission and for which the publication of the notice in the official journal of the European Union. Accredited conformity assessment bodies, the conformity certificate is issued on the basis of the testing laboratory test report (issued in accordance with the standard LVS EN ISO/IEC 17025:2005 "the competence of testing and calibration laboratories-General requirements", making their interpretation to the standard LVS EN ISO 4259 "petroleum products: 2007. Data discovery and use of precision testing methods ");
7.2. a document issued by a conformity assessment body accredited by the society with limited liability "the standardization, accreditation and Metrology Centre ' to the standard LVS EN ISO/IEC 17025:2005" the competence of testing and calibration laboratories-General requirements ", or any other Member State of the European Union notified body for which the accreditation of the Ministry of economy has published a notice in the newspaper" journal "of Latvia or of a Member State of the European Union has announced the European Commission and for which the publication of the notice in the official journal of the European Union. This paper indicates that rule 3, 4.1, 6.1, 6.2, 6, 6.3 and 6.4 of the parameters set out in point and news (information) about this rule referred to in paragraph 2 in the bioethanol product, biometān, from pure rape seed oil derived biodiesel and pure rape seed oil percentage. "
7. Express 9, 10 and 11 the following: "9. the rule of cetane number 2.1., 2.4 and 2.9. the products referred to in point determined using the standard LVS EN ISO 29,993:2005" petroleum products-determination of the flash point of the diesel fuel quality – method "Has a specific method, shall not be less than 51.10. Winter period (from 1 November to 31 March) cetane number the rule 2.4 and 2.9. the products referred to in point no less than 47.11. This provision 2.1. , 2.4, 2.5, 2.6, 2.8 and 2.9 of the products referred to in point parameters, testing and interpretation of results to the standard LVS EN ISO 4259 "petroleum products: 2007. Data discovery and use of precision testing methods '. "
8. Supplement with 12.4 points as follows: "metallic additives the metilciklopentadiēnilmangān 12.4 trikarbonil (MMT) this provision 2.6 and 2.8. products referred to may not exceed 6 mg Mn per litre. If the merchant is the fuel retail has added metallic additives, all fuel outlets where consumers have access to fuel and metal additives post clearly visible indication of metallic additives in fuel with the following label: "Contain metallic additives". This marking is located along with the type of fuel. The label and the letter size must be such as to be easily visible and easy to read. "
9. Make the paragraph 19 by the following: "19. Trader this rule 2.2., 2.3., 2.4, 2.6, 2.8 and 2.9. products referred to in can be mixed using the mixing liquid also feeds method if the following process allows legislation excise movement."
10. Express 22 the following: "22. moving and exercising this provision in paragraph 2, the products referred to in the present and add fuel to the source document, in accordance with the movement of excisable products and accounting regulatory laws. Fuel source document in addition to biodiesel or bioethanol indicates the percentage of the total fuel quantity and this rule 7.1 or 7.2. quality of evidence referred to in the document number and date of issue. "
11. Supplement with 33.5. and 20.9. subparagraph by the following: "this rule 2.8 20.8. the products listed in point –" E10 ";
20.9. this rule 2.9. products listed in point – "B7". "
12. Express 34 as follows: "34. fuel retailer information mark indicates that this provision 2.1., 2.4., 2.5, 2.6 and 2.8. products referred to in point requires the use of the internal combustion engine, which is designed or later applied to the mixture of biofuels or biofuel use."
13. Replace paragraph 46 numbers and the word "2.2 and 2.6." with the figures and word "2.2, 2.6 and 2.8.".
14. To supplement the rules with 47 and 48 points by the following: "47. From 1 January 2014, the metilciklopentadiēnilmangān trikarbonil of metallic additives (MMT) in gasoline may not exceed 2 mg Mn per litre.
48. Until 31 December 2011, diesel fuel for use in rail vehicles and agricultural and forestry tractors, maximum sulphur content shall not exceed 1000 mg/kg. "
15. Add to the informative reference to directives by the European Union (4) and (5) as follows: "4) of the European Parliament and of the Council of 23 April 2009. directive 2009/30/EC amending Directive 98/70/EC as regards petrol, diesel and gas oil and introducing a mechanism for specifications of the vehicles to use fuel greenhouse gas emissions control and reduction, amending Council Directive 1999/32/EC as regards the specification of fuel used by inland waterway vessels and repealing Directive 93/12/EEC;
5) Commission 2011 June 1 2011/63/EU directive, which, for the purposes of adapting to the European Parliament and the Council amending Directive 98/70/EC relating to the quality of petrol and diesel fuels. "
16. To supplement the provisions of annex 7 with the following: "7. the annex to Cabinet of Ministers of 18 October 2005, regulations No 822 quality requirements for unleaded petrol with 10% vol. of ethanol added to the total volume of gasoline no PO box
Parameter 1 unit minimum maximum 1 Robežvērtība2. Research octane number 95-2.85-3 Ron engine. Vapour pressure kPa-summer reference period3 70.0 4. Distillation-pārtvaicēt fuel quantity 100 ° C –-46.0% V/V pārtvaicēt fuel quantity 150 ° C% V/V 75.0-5. the composition of the Hydrocarbons-olefins% V/V – 18.0-aromatics% V/V – 35.0-benzene% V/V-1.0 5. oxygen content% m/m 7 3.7 oxygen-containing compounds-3.0% V/V methanol-ethanol (it may be necessary to add stabilisers)% V/V% V/10.0-isopropyl alcohol V-12.0-tert-butyl-15.0% V/V% V/V-izobutilspirt-15.0
-The Aether, which is a molecule of carbon atoms or more 5% V/V-22.0-other oxygen-containing savienojumi4% V/V – 15.0 8. Sulphur content mg/kg-9.10.0 g/l of lead content-0.005 notes.
1 use the test methods specified in EN standard EN 228:2011 ' auto/oil. Unleaded petrol. Requirements and test methods ". You can accept the analytical methods set out in the standard LVS EN 228:2011 ' auto/oil. Unleaded petrol. Requirements and test methods "to replace the standard if they can provide at least the same accuracy and at least the same level of precision as the analytical method this method replace.
2 specifications are "true values". The limit values fixed in accordance with the standard EN ISO 4259: LV 2007 "oil products. Data discovery and use of precision testing methods "and in fixing a minimum value, a minimum difference of 2R above zero (R = reproducibility). The results of individual measurements shall be interpreted on the basis of the standard LVS EN ISO 4259:2007 criteria described.
3 summer period shall begin no later than 1 June and lasts at least until 31 august.
4 other univalent alcohols and ethers, which boils the end point not exceeding the standard LVS EN 228:2011 ' auto/oil. Unleaded petrol. Requirements and test methods "."
17. To supplement the provisions of Annex 8 with the following: "9. in the annex to Cabinet of Ministers of 18 October 2005, regulations No 822 quality requirements for diesel fuel with biodiesel up to seven% vol. of total fuel volume no PO box
Parameter 1 unit minimum maximum 1. Robežvērtība2 cetane number by 51.0-2. Density at 15 ° C kg/m3 – 845.0 3. Distillation:-temperature, when evaporated 95% V/V fuel ° C – 360.0 4. Polycyclic aromatic hydrocarbons – 8.0% m/m of sulphur content of 5 mg/kg: 6.10.0 methyl esters of fatty acids content% V/V-7.03 notes.
1 are used in the test methods specified in EN standard EN 590 + A1:2011 ' auto/oil. Diesel oil. Requirements and test methods ". You can adopt the method of analysis laid down in standard EN replacement EN 590 + A1:2011 ' auto/oil. Diesel oil. Requirements and test methods ", if it can provide at least the same accuracy and at least the same level of precision as the analytical method this method replace.
2 specifications are "true values". The limit values fixed in accordance with the standard EN ISO 4259: LV 2007 "oil products. Data discovery and use of precision testing methods "and in fixing a minimum value, a minimum difference of 2R above zero (R = reproducibility). The results of individual measurements shall be interpreted on the basis of the standard LVS EN ISO 4259:2007 criteria described.
3 fatty acids methyl esters meet standard LVS EN 14214 + A1:2011 "automotive fuel. Of the fatty acid methyl esters (fame) diesel engines. Requirements and test methods "."
Prime Minister v. Economic Minister Dombrovskis a. camphor