Amendments To The Cabinet Of 23 April 2002, The Regulation No 163 "regulations On Noise Emission By Equipment Used Outdoors"

Original Language Title: Grozījumi Ministru kabineta 2002.gada 23.aprīļa noteikumos Nr.163 "Noteikumi par trokšņa emisiju no iekārtām, kuras izmanto ārpus telpām"

Read the untranslated law here: https://www.vestnesis.lv/ta/id/127961

Cabinet of Ministers Regulations No. 100 in Riga in 2006 (January 31. No 6 59) amendments to the Cabinet of 23 April 2002, the Regulation No 163 "regulations on noise emission by equipment used outdoors ' Issued in accordance with the law" on conformity assessment "and article 7 of the law" on pollution "of article 11 paragraph 4 the second subparagraph to make Cabinet of 23 April 2002, the Regulation No 163" regulations on noise emission by equipment used outdoors (Latvian journal in 2002, 64., 2004, nr. 190.68. No.) the following amendments: 1. Replace the text, the words "the manufacturer's guaranteed sound power level" (fold) with the words "guaranteed sound power level" (fold). 2. Replace the text, the words "manufacturer" (fold) with the words "the manufacturer or his authorized representative in the European Union" (the fold). 3. Replace the text, the words "authorized or notified body" (fold) with the words "notified body" (fold). 4. Express 3.1. and 3.2. subparagraph by the following: "3.1. manufactured in accordance with this regulation and the manufacturer or his authorized representative in the European Union it has stated, by drawing up a declaration of conformity; 3.2. the marked with the CE marking and the indication of the guaranteed sound power level determined in accordance with the provisions referred to in paragraph 4 of the standard. " 5. paragraph 4 shall be expressed by the following: "4. the checks referred to in these provisions shall be carried out in accordance with the following standards: 4.1 LVS EN ISO 3744:2004" acoustics-noise source sound power levels by sound pressure-engineering method in the free field sound above the reflecting plane "; 4.2. Lvs EN ISO 3746:2004 + AC "Acoustics-Noise source sound power levels by sound pressure-Kontrolmetod with comprehensive measurement surface over a reflecting plane"; 4.3. EN 345:2002 "acoustics-outdoor equipment sound power measurement methods '." 6. Make paragraph 8 by the following: "8. the equipment with the requirements contained in these provisions shall assess the following notified body: 8.1. This provision 5.1 or 5.2 procedure referred to out the certification authority accredited the national agency" Latvian National Accreditation Bureau "in accordance with standard EN 45011: EN 2004" General requirements for bodies dealing with product certification systems ' requirements, or other Member State of the European Union notified body, on which the Economy Ministry published a notice in the newspaper "journal"; 8.2. the provisions referred to in point 5.3 of the procedures carried out by the institution accredited national agency "Latvian National Accreditation Bureau" in accordance with standard EN 45012, EN: 2004 "General requirements quality system assessment and certification/registration bodies" and the standard LVS EN 45011:2004 "General requirements for bodies dealing with product certification systems ' requirements, or other Member State of the European Union notified body, on which the Economy Ministry published a notice in the newspaper" journal "of Latvia." 7. To supplement the provisions under point 8.1 as follows: "the noise of equipment 8.1 measurements laboratory accredited by the national agency" Latvian National Accreditation Bureau "under the standard LVS EN ISO/IEC 17025:2005 for testing and calibration laboratories" General requirements "requirements, or other European Union Member State in which the notified laboratory of the Ministry of economy published a notice in the newspaper" journal. "" 8. Express and 12.8 12.7. subparagraph as follows: "an indication of compliance with 12.7. these rules (the European Parliament and of the Council of 8 May 2000, Directive 2000/14/EC on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors); 12.8. the report of noise measurements carried out in accordance with the provisions of paragraph 4 of the said standards. The report shall indicate the instruments used, the measurement results and their relation to the guaranteed sound power level. " 9. Replace paragraph 17, the words and figures "in the standard EN 345:2002" with the words "this provision and the number 4 in the standards mentioned in paragraph". 10. Make the following point 19:19 ". If the equipment does not meet the requirements of these provisions, the notified body shall inform the market surveillance authority. " 11. paragraph 21 of the introductory paragraph to express a first and a second sentence as follows: "the notified body the manufacturer shall lodge an application for examination of a sample of the equipment, in order to assess its conformity with the requirements of this regulation. The application shall state the manufacturer's brand name and address, and, if the application is lodged by the authorised representative of the manufacturer,-also its name and address, as well as written declaration that the same application has not been lodged with any other notified body. " 12. Express 21.5. subparagraph as follows: "an indication of compliance with the 13.4. these rules (the European Parliament and of the Council of 8 May 2000, Directive 2000/14/EC on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors) requirements." 13. Replace the introductory part of paragraph 24, the words and figures "LVS EN ISO 9001" quality management system "with the words and figures" LVS EN ISO 9001:2001 "quality management systems-requirements". 14. Express 24.7. subparagraph as follows: "an indication of compliance with 24.7. these rules (the European Parliament and of the Council of 8 May 2000, Directive 2000/14/EC on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors) requirements." 15. Express 25.1. subparagraph by the following: "overview of testing on 25.1. noise measurements carried out in accordance with these rules;". 16. Make the following subparagraphs 24.0. ". notification of the appropriate 24.0 equipment to comply with these rules (the European Parliament and of the Council of 8 May 2000, Directive 2000/14/EC on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors);". 17. Make 40 as follows: "40. consumer rights protection centre shall provide the Ministry of the economy of the manufacturer or of his authorised representative sent a copy of the Declaration of conformity. The Ministry of the economy compiled and forwarded to the European Commission. " 18. To supplement the rules with the informative reference to European Union directives as follows: "Informative reference to European Union directives, the regulations include provisions resulting from: 1) of the European Parliament and of the Council of 14 December 2005 Directive 2005/88/EC amending Directive 2000/14/EC on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors; 2) of the European Parliament and of the Council of 8 May 2000, Directive 2000/14/EC on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors. " 19. Make annex 2 as follows: "annex 2 Cabinet of 23 April 2002, the Regulation No 163 equipment noise emission limit values guaranteed sound power level of equipment must not exceed the following maximum noise emission limit values makes exasperated little gasps: no machinery or equipment type PO box installed power P (in kW) electric power (kW), equipment Pel1 mass m (kg) cutting width L (cm) the permissible sound power level 4 (dB/1 pW) phase I phase II (3 January 2006) 1 (compacting). compaction machines (vibrating rollers compactors, vibratory plates, P)