Cabinet of Ministers Regulations No. 206 in Riga in 2008 (25 March. Nr. 19 11) amendments to the Cabinet of Ministers of 25 April 2000, the provisions of the "rules on no 157 of lifts and their safety components in the design, manufacture and installation of the lift conformity assessment issued under the law" on conformity assessment "article 7 1. make a Cabinet of 25 April 2000, the provisions of the" rules on no 157 lifts and their safety components in the design, manufacture and installation of the lift conformity assessment "(Latvian journal, 2000 , 151./153.nr.; 2002, 97 no; in 2004, 68 no). 1.1. the following amendments: replace the text, the words "type-examination" (fold) with the words "EC type examination" (fold);
1.2. the express 1.1. subparagraph by the following: "1. lift-lifting equipment transporter moves along the still gām guides at an angle, relative to the horizontal is greater than 15 degrees, and which is intended for the people, the people and the movement of cargo or cargo only if the equipment to move cargo in person may enter it without difficulty, and inside, or in another location, you can reach the inside of the machine, is the control device. Lifting appliances moving along a fixed course even where they do not move along rigid guides, be considered as lifts; ";
1.3. to supplement the rules with the bottom point 1.5 by the following: "1.5. the transporter-elevator part that support people or freight lift away or lowering them.";
1.4. to make paragraph 3 by the following: "3. These provisions shall not apply to: 3.1. lifting appliances whose speed is not greater than 0.15 m/s;
3.2. hoists on construction sites;
3.3. cableways, including funicular railways;
3.4. lifts designed and made specifically for military or police purposes;
3.5. lifting appliances from which work is carried out;
3.6. use lifting mining equipment;
3.7. the lifting facilities for stage artists lift away plays;
3.8. lifting equipment in vehicles;
3.9. lifting appliances connected to machinery and intended for getting jobs, including car maintenance and inspection;
3.10. rack and pinion type elevators;
3.11. the escalators and mechanical walkways. ';
1.5. make the following point 12: ' 12. Elevator, lift and elevator components of security compliance of the installation shall be assessed: 12.1. Latvian National Accreditation Bureau (hereinafter accreditation) accredited institutions, for which the accreditation of the Ministry of economy has published a notice in the newspaper "journal" which is accredited according to the following standards (notified body): 12.1.1. Lvs EN 45011:2004 "General requirements for bodies dealing with product certification systems" to carry out the EC type-examination of lifts according to the requirements of module B;
12.1.2. Lvs EN ISO/IEC 17020:2005 "the main criteria for the various types of bodies performing inspection" to perform the lift conformity declaration EC type according to the requirements of module C;
12.1.3 LVS EN ISO/IEC 17021: conformity assessment 2007 ". Requirements for bodies providing audit and management system certification ", to perform the installation of the lift quality assurance assessment according to the requirements of module D and lift to the assessment of the quality system according to the requirements of module E;
12.1.4. EN EN 45011:2004 "General requirements for bodies dealing with product certification systems" to make a copy of the verification of the lift in accordance to the requirements of module G;
12.1.5. Lvs EN ISO/IEC 17021: conformity assessment 2007 ". Requirements for bodies providing audit and management system certification ", to make a general lift in the assessment of the quality system according to the requirements of module H;
12.2. other Member States of the European Union or the European economic area, notified body for which the Economy Ministry published a notice in the newspaper "Latvian journal". ";
1.6. to make 16 and 17 points by the following: ' 16. Each transporter shall be fitted with a cab. The elevator car to be designed and constructed according to the maximum expected number of people move and lift the nominal load capacity, which is determined by the installer of the lift.
17. If the lift is intended for the movement of people and the size of the movement, the disabled allows the elevator cab designed to facilitate disabled access to the elevator car and elevator use. ";
1.7. to supplement the rules with the informative reference to European Union directives as follows: "Informative reference to European Union directives, the regulations include provisions resulting from: 1) of the European Parliament and of the Council of 29 June 1995 directive 95/16/EC on the approximation of the laws of the Member States relating to lifts;
2) of the European Parliament and of the Council of 17 May 2006 on the directive 2006/42/EC on machinery and amending Directive 95/16/EC (recast) ".
2. the rules shall enter into force on December 29, 2009. Prime Minister Godmanis economic Minister i. k. Gerhard