Cabinet of Ministers Regulations No. 697 in 2016 (November 1. No 58 11) amendments to the Cabinet of Ministers on 12 January 2016. Regulations No. 27 "rules on recreational vessels and watercraft construction, assessment of conformity and placing on the market" are Issued in accordance with the law "on conformity assessment" 7. the first and second subparagraphs and the maritime administration maritime safety law and article 11 of the eleventh part 1. make Cabinet 2016 12. Regulation No 27 of January "rules on recreational vessels and watercraft construction , conformity assessment and the placing on the market "(Latvian journal, 2016, nr. 24) the following amendments: 1. to supplement, on the basis of the provisions of the law issued in" behind the numbers and article 7 of the first and the second part "and the number", with the words and the maritime administration maritime safety law and article 11 of the eleventh part "; 1.2. to make paragraph 1 by the following: "1. determines: 1.1. requirements for recreational vessels and watercraft, as well as their engine (product) design, manufacture and conformity assessment of products, the market surveillance authorities and the order in which you perform market surveillance of products; 1.2. the procedure is granted and revoked the manufacturer's code for the single natural or legal person in the Republic of Latvia building recreational boats or water bikes. '; 1.3. to supplement the provisions of this chapter with the 7.1 version: 7.1 single "manufacturer code assigning a single code, producer 111.1 of the Republic of Latvia shall grant the State stock company Latvian maritime administration Maritime Safety Inspectorate (hereinafter Inspectorate). 111.2 the single manufacturer code consists of three uppercase Latin letters in different combinations and choose the manufacturer, provided that it is different for each manufacturer. 111.3 for single code, producer of the manufacturer before placing the product on the market shall submit an application in inspection, giving your contact details and preferred the single manufacturer code, and in accordance with this provision, paragraph 52 of the Declaration of conformity to design or produce a copy of the CE conformity marking provided for copy (hereinafter documents), as well as a declaration that the manufacturing plant is located in the territory of the Republic of Latvia (indicates the specific production site address). 111.4 inspections five working days shall check the documents for compliance with the requirements of these regulations. If the test result is positive, the inspection shall take a decision on granting the single manufacturer code and shall notify the manufacturer.
111.5 in accordance with this rule 111.4 points awarded joint inspection of the manufacturer code enter the European Commission managed electronic internal information exchange database (hereinafter database), where it is available in the European Union and European economic area national market surveillance authorities as well as with information on the manufacturer publishes State joint stock company "Latvian maritime administration" in http://www.lja.lv/tīmekļvietn (tīmekļvietn). 111.6 of any changes to the documents or the manufacturer immediately inform inspection and, if necessary, submit to the inspection of the new documents and declarations. 111.7 single manufacturer code for updating the database and tīmekļvietn by the manufacturer every three years repeated inspection of documents and the Declaration. If the Declaration and the documents are not submitted or they do not comply with the requirements of this regulation, the Office shall withdraw the manufacturer assigned uniform manufacturer code and delete it from the database, and tīmekļvietn. 111.8 decision on refusal to grant the single manufacturer's code or the withdrawal of a manufacturer may challenge the maritime administration maritime safety and the law. " 2. the rules shall enter into force on January 1, 2017. Prime Minister Māris kučinskis traffic Minister Uldis Augul States