Key Benefits:
www.djpp.depkumham.go.id
2010, No. 74 6
3. copy of the Taxes (NPWP) Pokok Number (NPWP); 4. copy Indentity Kepabeanan (NIK); 5. copy of the Industrial Business License (IUI), the Approval Or Extension
The Capital Planting Of The Capital Planting Coordination Agency (BKPM) or the Company's Industrial List Sign (TDI) concerned;
6. list of machines and equipment owned; 7. The Import Goods Needs Plan (RKIB) for the need
production 1 (one) year that includes the type and specifications of the goods/Post Tarif/HS 10 (ten) digit; and
8. information on the production capacity, produski plans and the raw materials needs of 1 (one) year of production
b. verse (1) figure 10 (ten) is provided based on the suitability of the types and volumes of the raw materials to be imported with the results of the research and assessment of the application provided by the document as follows: 1. copy the Industrial Business License (IUI) For the manufacturer/copy of the Business License Agreement
Trade (SIUP) for the importer; 2. copy of the Company List Mark (TDP); 3. copy of the Taxes (NPWP) Pokok Number (NPWP); 4. information on imported product types as raw materials and
the number of needs; 5. information on the import of import; 6. information about the product type and specifications
using imported products as raw materials, which are equipped with a copy mill certificate; and
7. a request letter from a user's company. (3) Signing and publishing of TPT Motor Vehicles as
referred to in paragraph (1) the letter c was performed after the Directorate General of Motor Vehicles Motor Vehicles gave authorization by online based on the results of the research and data as referred to in paragraph (1) letter b 1 and number 2.
(4) In the granting of authorization as referred to in paragraph (3), the Director General of the Motor Vehicle Industry, if required can
www.djpp.depkumham.go.id
2010, No. 74 7
verifying truth to the data in the document as referred to in paragraph 1.
Section 2 of the Enterprise Board of Free Trade Area and the Free Port of Batam, Bintan, Karimun Submit reports of technical considerations/recommendations and the issuer of the Type Registration Mark as referred to in Section 1 in writing, each semester of the year in question to the Director General of the Industrial Pembina. is concerned through the Minister of Industry with the following schedule: a. every 15 July for the first semester; and b. every January 15 for the second semester.
Article 3 Ministers may withdraw a portion and or the overall authority referred to in Article 1 of the paragraph (1) letter a, if the Free Trade Area and the Port of the Enterprise's Enterprise are specified in Section 1 of the Second Term. Free Batam, Bintan and Karimun meet the following conditions: a. Not able to carry out the authority that has been given; b. cannot exercise the authority caused by change
of the Minister's policy; and or c. suggest a partial recall and or understanding
the authority has been obtained. Article 4
The provisions of the verification implementation as referred to in Article 1 of the paragraph (4) are further governed by the Regulation of the Director General of the Motor Vehicle Industry.
Article 5 of the Regulation of the Minister goes into effect on the date Uninvited.
www.djpp.depkumham.go.id
2010, No. 74 8
For everyone to know, the Minister's Regulation is promulred by placing it in the State News of the Republic of Indonesia.
Specified in Jakarta on 4 February 2010 MINISTER OF COMMERCE OF THE REPUBLIC INDONESIA, MOHAMAD S. HIDAYAT
promulred in Jakarta on 4 February 2010 MINISTER FOR LAW AND HUMAN RIGHTS REPUBLIC OF INDONESIA, PATRIALIST AKBAR
www.djpp.depkumham.go.id
14. Regulations Minister Perindustrian Number 01 /M-IND/PER/1/2009 on the Treatment of Indonesian National Standards (SNI) of Steel Sheets, Plates, and Hot Canai Gulungan (Bj. P) Concurrent as amended by the Regulation Minister of Industry Number 38/M-IND/PER/3/2009;
15. Regulations Minister Perindustrian Number 02 /M-IND/PER/1/2009 on National Standard Treatment
www.djpp.depkumham.go.id
2010, No. 74 4
DECIDED: Establishing: INDUSTRY MINISTER REGULATIONS ON
DEVOLUTION OF TECHNICAL CONSIDERATIONS/RECOMMENDATIONS TO THE ENTERPRISE GOVERNING BODY KAW ASAN FREE TRADE AND THE BATAM FREE PORT, BINTAN AND CARIMMUNES.
Article 1
(1) devolve authority: a. technical considerations/recommendations of the field-dustrian field
which is the Government's authority to the Board of Free Trade Area and the Free Port of Batam, Bintan and Karimun, which consists of: 1. Technical considerations as:
a) Importir Producer (IP) iron or steel; and b) Regable importers (IT) iron or steel;
2. Technical considerations of metal scrap export approval; 3. Technical considerations for the import of capital goods are not new; 4. Technical considerations as the Importer Textile Manufacturer (IP
Textile); 5. recombiner as:
Indonesia (SNI) Baja Sheet and Zinc Alloy Scroll Almunium-Seng Alloy (Bj. L USA) Personally as it has been amended with the Regulation of Minister of Industry Number 39/M-IND/PER/3/2009;
16. The Regulation of Trade Minister Number 12 /M-DAG/PER/7/2009 on Devolution Of Licensing Authority in the Field of Foreign Trade to the Governing Body of Trade Area and the Free Port of the Batam, the Commerce Area Enterprise Company and the Bintan Free Port, and the Commerce Area Board of Enterprise and the Karimmune Free Port;
www.djpp.depkumham.go.id
2010, No. 74 5
a). Importer Registered (IT) Salt; and b). Importer of Manufacturers (IP) of non-Iodized salt and Iodization;
6. recommendation as Importer Producer Cullet (IP-Cullet); 7. Recommended as Importer Manufacturer Clokeh (IP-Cengkeh); 8. Recommended as Importer Producer (IP) Plastic Materials
Propylene; 9. recommendation as an importer of a Scrap Rubber Manufacturer (IP-Scrap
Rubber); and 10. Technical considerations on product imports are excluded from
the mandatory provisions of the National Standard of Indonesia (SNI), including: a) Steel Sheets, Plates and Hot Canai Scrolls (Bj. P) which
has certain specifications, which are used as raw materials;
b) the Zinc Sheet and Zinc Scroll Alloy of Almunium-Seng (Bj). US I) that have certain specifications, which are used as raw materials;
b. research on the application of the Type Registration Mark (TPT) Motor Vehicle, which includes: 1. research on truth and the completeness of the requirements document
included; 2. Revenue (entry) data; and 3. print creation (print out); and
c. to sign and publish TPT Motor Vehicles on behalf of the Director General of the Motor Vehicle Industry.
(2) Technical Perscales/recommendations as referred to in: a. verse (1) letter a, except for technical considerations as
referred to at number 3 (three) and number 10 (ten), given based on the suitability of the types and volumes of the raw materials to be imported with the results of the research and The assessment of the application is provided as follows: 1. copy the manufacturer's importer ID. copy of the Company List Mark (TD
