STATE NEWS
REPUBLIC OF INDONESIA
INDONESIAN REPUBLIC OF INDUSTRY MINISTER REGULATION
NUMBER: 26/M-IND/PER/2/2012
ABOUT
APPOINTMENT OF THE CONFORMANCE ASSESSMENT AGENCY IN ORDER OF ENACTMENT AND SUPERVISION
INDONESIA NATIONAL STANDARD (SNI) AGAINST 3 (THREE) PRODUCTS
THE ELECTRONICS INDUSTRY IS OBLIGATORY
WITH THE GRACE OF THE ALMIGHTY GOD
MINISTER OF INDUSTRIES OF THE REPUBLIC OF INDONESIA,
Weigh: a. that in order to exercise the implementation of the Indonesian National Standard Treatment and supervision (SNI) against 3 (three) of the mandatory industrial production of the Electronics with the Regulation of the Minister of Industry Number 84/M-IND/PER/8/2010, accordingly with the provisions of the laws there has been an evaluation of the associated Instituations Institution appointed with the Regulation of the Minister of Industry Number 109/M-IND/PER/10/2010;
B. that in accordance with the results of the evaluation, it is necessary to appoint and establish the Product Certification Institute and the Test Laboratory as set forth in this Regulation Attachment as the Institution for the Concurrent Assessment to perform the certification and 3 (3) quality assurance of the Electronics Industry;
c. that under consideration as intended in the letter a and the letter b, need to be issued the Regulation of the Minister of Industry on the Appointment Of the Institution of Conformance in the Order of the Indonesian National Standard Monitoring and Oversight (SNI) Against 3 (3) Electronics Industry Products Are Mandatory;
Given: 1. Act No. 5 of 1984 on Industry (State Gazette of Indonesia Republic of 1984 No. 22, Additional Gazette Republic of Indonesia Number 3274);
2. Government Regulation No. 17 Year 1986 on Regulatory Authority, Coaching and Industrial Development (State Sheet of the Republic of Indonesia Year 1986 No. 23, Additional Gazette of the Republic of Indonesia No. 3330);
3. Government Regulation No. 102 Year 2000 on National Standardization (State Sheet of Indonesia 2000 Number 199, Additional Gazette Republic of Indonesia Number 4020);
4. Government Regulation Number 38 Year 2007 on the Partition of Government Affairs Between Government, Provincial Local Government and District/City Government (State Gazette of 2007 Indonesia Number 82, Extra State Sheet) Republic of Indonesia No. 4737);
5. Regulation of the President of the Republic of Indonesia No. 47 Year 2009 on the Establishment and Organization of the Ministry of State as amended last several times with the Regulation of the President of the Republic of Indonesia No. 91 of 2011;
6. Regulation of the President of the Republic of Indonesia No. 24 Year 2010 on Occupation, Duty and Functions of the Ministry of State as well as the Susunan Organization, the Task and Functions of the Ministry of State as amended by the Regulation of the President of the Republic of Indonesia Indonesia Number 92 Year 2011;
7. Decree of the President of the Republic of Indonesia Number 78 of 2001 on the National Accreditation Committee;
8. Decree of the President of the Republic of Indonesia No. 84 /P of the Year 2009 on the Establishment of the United Indonesian Cabinet II Period 2009-2014 as amended by the Decree of the President of the Republic of Indonesia Number 59 /P of the Year 2011;
9. Regulation Minister Perindustrian Number 86/M-IND/PER/9/2009 about the Indonesian National Standard of Industrial Fields;
10. Regulation Minister of Industry Number 84/M-IND/PER/8/2010 on the Treatment of Indonesian National Standards (SNI) Against 3 (Three) Electronica Industrial Products To Be Mandatory;
11. Regulation Minister of Industry Number 105/M-IND/PER/10/2010 on the Organization and the Working Governance of the Ministry of Industry;
DECIDED:
Establish: MINISTRY OF MINISTRY ' S REGULATIONS ON THE APPOINTMENT OF THE INSTITUTION OF SUITABILITY ASSESSMENT IN ORDER OF THE ENFORCEMENT AND SUPERVISION OF THE NATIONAL STANDARD OF INDONESIA (SNI) AGAINST THE 3 (THREE) MANDATORY ELECTRONICS INDUSTRY PRODUCTS.
Section 1
Pointing:
a. Product Certification Institutions that have been accredited as set forth in the Order of the Regulation of this Minister on the letter A to perform the SNI 3 (three) Industry Products of the Electronica as set forth in the Attachment in the letter A is referred to in the Order Document.
B. Test Lab, which has been accredited as set forth in the Order of the Order of this Minister in the letter B to perform testing 3 (3) of the Electronic Industry Product as set forth in the Attachment on the letter B in question; and
C. Unaccredited Product Certification Institutions as set forth in the Order of the Regulation of this Minister in the letter C to carry out the SNI Certification 3 (three) of the Electronic Industry Product as set forth in the Annex to the letter C is referred to.
Section 2
(1) Product Certification of the Program as defined in Section 1 of the letter c must comply with the requirements as a Product Certification institution accredited by the National Accreditation Committee (KAN) in no time at least 1 year (1) year since Promulgled the Regulation of the Minister and reported the accreditation referred to the Head of the Policy, Climate, and Industrial Review Board of the Ministry of Industry.
(2) If at any time as referred to in paragraph (1) the Program of the Product Certification is not accredited, its appointment is declared over.
Section 3
(1) If the appointment of the Product Certification Institution as referred to in Section 2 of the paragraph (2) terminates, the SNI Use Product (SPPT-SNI), which has been issued by the Program Certification, is intended to be transferred to another LSPro. Appointed.
(2) The Head of the Policy, Climate, and Industrial Review Board performs the coordination of the transfer of the use of the SNI Use Product (SPPT-SNI) as referred to in paragraph (1) in no time at least 6 (6) months.
(3) The SPPT-SNI Use Product (SPPT-SNI) which has been diverted as referred to in paragraph (1) and (2) is stated in effect until the corresponding SPPT-SNI is terminated.
Section 4
The Assessment Board and the Test Laboratory as referred to in Section 1 must report the results of the certification performance and testing to the Director General of the High Technology Based Excellence and the Head of the Policy Review Board, Climate, and Industrial Mutu.
Section 5
The head of the Policy, Climate, and Industrial Review Board is monitoring and evaluation of the designated Product Certification Institute and the designated Test Laboratory as referred to in Article 1.
Section 6
At the time the Ordinance of the Minister is promulred, the Regulation Minister of Industry Number 109/M-IND/PER/10/2010 is all related to the appointment of the Institution of Conformity Assessment of the SNI 3 (three) of the Industrial Products of the Electronics as referred to in the Attachment XXIX, Annex XXX, and Annex XXXI The Minister's Ordinance is referred to, revoked and declared not applicable.
Section 7
The Minister ' s rules are beginning to apply to the date of the undrased.
In order for everyone to know, the Regulation of the Minister is promulred by its placement in the News of the Republic of Indonesia.
Set in Jakarta
on February 20, 2012
MINISTRY OF INDUSTRY
REPUBLIC OF INDONESIA
MOHAMAD S. HIDAYAT
Promulgated in Jakarta
on February 28, 2012
MINISTER OF LAW AND HUMAN RIGHTS
REPUBLIC OF INDONESIA
AMIR SYAMSUDIN
* not yet in the form of loose sheets
