The text is not in the original format.
Back
STATE NEWS
REPUBLIC OF INDONESIA
INDONESIAN REPUBLIC OF INDUSTRY MINISTER REGULATION
NUMBER 19/M-IND/PER/2/2012
ABOUT
INDONESIAN NATIONAL STANDARD IMPLEMENTATION (SNI) RUBBER HOSE FOR OBLIGATORY LPG GAS STOVE
WITH THE GRACE OF THE ALMIGHTY GOD
MINISTER OF INDUSTRIES OF THE REPUBLIC OF INDONESIA,
Weigh: a. that in order to optimize the implementation of the Indonesian National Standard (SNI) Hose Hose for Compulsory LPG Gas Cookers and the agility in the international trade process over the intended product are related to the changing number of Harmonize System (HS) In 2012, the need to rearrange the Indonesian National Standard Treatment (SNI) is mandatory for the intended product;
B. that under consideration as intended in the letter a, it is necessary to establish the Regulation of the Minister of Industry on the Treatment of Indonesian National Standards (SNI) Rubber Hose for IPG Gas Stove (s);
Given: 1. Act No. 5 of 1984 on Industry (State Gazette of Indonesia Republic of 1984 No. 22, Additional Gazette Republic of Indonesia Number 3274);
2. Law No. 7 Year 1994 on Enactment Of The Agreement Establishing The World Trade Organization (Approval Of The Establishment Of World Trade Organization) (State Sheet Of The Republic Of Indonesia In 1994 Number 57, Additional Gazette Republic of Indonesia No. 3564);
3. Act No. 10 of 1995 on Kepabeanan (Sheet of State of the Republic of Indonesia in 1995 Number 75, Additional Gazette Republic of Indonesia Number 3612) as amended by the 2006 Act Number 17 (State Sheet) Republic of Indonesia in 2006 No. 93: Additional Gazette of the Republic of Indonesia Number 4661);
4. Act No. 8 of 1999 on Consumer Protection (State Sheet of Indonesia Year 1999 Number 42, Additional Gazette of the Republic of Indonesia No. 3821);
5. Law No. 32 Year 2004 on Regional Governing Law (Indonesian Republic of Indonesia 2004 Number 125, Additional Gazette Republic of Indonesia Number 4437) as amended by the 2008 Act No. 12 (State of the Republic of Indonesia 2008 No. 59, Additional Gazette of the Republic of Indonesia No. 4844);
6. Government Regulation No. 17 Year 1986 on Regulatory Authority, Coaching and Industrial Development (State Sheet of the Republic of Indonesia Year 1986 No. 23, Additional Gazette Republic of Indonesia Number 3330);
7. Government Regulation No. 102 Year 2000 on National Standardization (State Sheet of Indonesia 2000 Number 199, Additional Gazette Republic of Indonesia Number 4020);
8. Government Regulation No. 38 Year 2007 on the Partition of Government Affairs Between Government, Provincial Local Government and District/City Government (State Gazette of 2007 Indonesia Number 82, Extra State Sheet) Republic of Indonesia No. 4737);
9. Regulation of the President of the Republic of Indonesia No. 47 of 2009 on the Establishment and Organization of the Ministry of State as amended last several times with the Regulation of the President of the Republic of Indonesia No. 91 of 2011;
10. Regulation of the President of the Republic of Indonesia No. 24 Year 2010 on Occupation, Duty and Functions of the Ministry of State as well as the Susunan Organization, Task and Functions of the Ministry of State as amended by the Presidential Regulation Number 92 Year 2011;
11. Decree of the President of the Republic of Indonesia Number 78 of 2001 on the National Accreditation Committee;
12. Decree of the President of the Republic of Indonesia No. 84 /P of the Year 2009 on the Establishment of the United Indonesian Cabinet II Period 2009-2014 as amended by the Decree of the President of the Republic of Indonesia Number 59 /P of the Year 2011;
13. Trade Minister Regulation No. 62/M-M-DAG/PER/12/2009 on the Obliviation of PDating tuman Label on Goods as amended by Trade Minister Regulation Number 22/M-DAG/PER/5/2010;
14. Regulation Minister Perindustrian Number 86/M-IND/PER/9/2009 about the Indonesian National Standard of Industrial Fields;
15. Regulation Minister Perindustrian Number 105/M-IND/PER/10/2010 on the Organization and the Working Governance of the Ministry of Industry;
16. Regulation of the Head of the National Standardization Board Number 1 of 2011 on the National Standardization Guidelines Number 301 of 2011 on the Indonesian National Standard Governing Guidelines;
DECIDED:
Establish: MINISTRY MINISTER REGULATION ON THE IMPLEMENTATION OF INDONESIAN NATIONAL STANDARDS (SNI) RUBBER HOSES FOR THE LPG GAS STOVE TO BE MANDATORY.
Section 1
In Regulation of the Minister this is referred to:
1. The SNI Use Product Certificate, which is subsequently called SPPT-SNI is the SNI Certificate Use Product Certificate issued by the Product Certification Agency to a manufacturer capable of producing Rubber Hose for LPG Gas Compor accordingly SNI requirements.
2. Product Certification Institute, next called LSPro is an agency that performs the SNI Use Product Certification activities.
3. The Laboratory of Testing is a laboratory conducting testing activities on the example of goods according to the specification/test method of the SNI.
4. The National Accreditation Committee, which is subsequently referred to as a non-structural institution, is located below and is directly responsible to the President with the task of establishing an accreditation and certification system and authorized to be accredited. agencies and laboratories to conduct certification activities.
5. Technical consideration is a letter issued by the Directorate General of Industrial Pembina which contains information about a product that has a Harmonize System (HS) number equal to the product that SNI is being treated Wajib is caused Certain reasons, special needs so that the intended product can be unenforceable in the SNI terms of the Ib.
6. Surveyances are periodically checking and or specifically against companies/manufacturers that have acquired SPPT-SNI for the consistency of the application of SPPT-SNI, which is performed by LSPro.
7. The next Product Standard Supervising Officer called PPSP is a civil servant in the center or area assigned to conduct surveillance of goods and or services at the production site and beyond the locations of production activities that SNInya has It's mandatory.
8. Minister is the Minister who organizes government affairs in the field of industry.
9. Directorate General Pembina Industry is Directorate General of the Ministry of Manufacturing Industry of the Ministry of Industry.
10. Director General Pembina Industry is Director General of Industry Base Manufacturing Industry Ministry of Industry.
11. Director Pembina Industry is the Director who fostered the Rubber Hose Industry for Gas Complains at the Directorate General of the Manufacturing Industry Base of the Ministry of Industry.
12. BPKIMI is the Board of Climate Policy Studies and Mutu Industries, Ministry of Industry.
13. Provincial Service is the Department of the Province which is the management of the government affairs of the industrial field.
14. District/City Services is the Department of the District/City which is a matter of government affairs of the industrial field.
Section 2
Implement SNI Hose Rubber for IPG Gas Stokers Compulsory, on products with SNI Numbers and Harmonize System (HS) numbers as follows:
Product Type | No. SNI | The Tarif/HS Post |
Rubber Hose for Compor Gas LPG06 -7213-2006 Amd1:20084009.31.99.10
4009.32.90.10
Article 3
The Company that manufactures Rubber Hose for LPG Gas Compor as referred to in Section 2 is required to apply SNI with:
a. have SPPT-SNI Hose Hose for LPG Gas Compor; as well as
B. provide an SNI sign on each product at a place that is easy to read and in a way that is not easily lost.
Section 4
(1) The provisions of the SNI lapse of the LPG Gas Compor as referred to in Section 2 do not apply to the Elastic Hose for an import LPG Gas Compor with the Tarif Post number (HS) as referred to in Section 2 if used:
a. for example of a test in order to publish SPPT-SNI; or
B. Special needs.
(2) The Rubber Hose for LPG Gas Compor as referred to in paragraph (1) is required to have the Technical Perscales of the Director General of the Industrial Pembina.
(3) Technical Perscales as referred to in paragraph (2) at least load the information as follows:
a. identity of the company/the applicant institution;
B. use;
c. the number of products to be imported;
D. import native country; and
e. product specification.
(4) Technical Licensing as referred to in paragraph (2) performed under the application of a company/institution equipped with a Meterated Statement is sufficient to be included with the proof that it can be accounted for which states that the imported product is used for:
a. for example of a test in order to publish SPPT-SNI; or
B. Special needs.
Section 5
(1) In providing Technical Perscales as referred to in Section 4 of the paragraph (2), the Director of Industry Buyer can coordinate with the associated agencies or agencies.
(2) The terms and conditions of the Technical Consideration as referred to in Section 4 of the paragraph (2) are further governed by the Regulation of the Director General of the Industry Pembina.
Section 6
(1) Publishing SPPT-SNI Hose rubber for LPG Gas Compor as referred to in Article 3 of the letter a performed by LSPro which has been accredited and appointed by the Minister in accordance with the scope of the SNI Hose Rubber for LPG Gas Compor with system 5 certification, through:
a. Rubber Hose's quality fitness testing for LPG Gas Compor in accordance with the provisions of the SNI as referred to in Section 2; and
B. audit the application of the SNI ISO 9001:2008 implementation of the Mutu Management System ISO 9001:2008 or its revision or any other Mutu Management System recognized.
(2) Testing as referred to in paragraph (1) the letter a is exercised by:
a) The Test Laboratory which has been accredited by the KAN with the scope of the SNI Hose Hose for LPG Gas Compor and is appointed by the Minister; or
b) The laboratory outside of the country that has been accredited by the accreditation agency in the site of the Laboratory of Contemplats is the one that has a mutually exclusive agreement (Mutual Recognition of Arrangement (MRA)) with the KAN (such as International Laboratory Accreditation (ILAC) or The Asia Pacific Laboratory Accreditation Cooperation (APLAC)), and the country is referred to have bilateral or multilateral agreements in the field of technical regulation with the Republican Government Indonesia and appointed by the Minister.
(3) Audit of the application of the Mutu Management System as referred to in paragraph (1) letter b based on:
a) Self-Statement of the application of the Mutu Management System pursuant to SNI ISO 9001:2008; or
b) The application of the Mutu Management System (s) in accordance with the SNI ISO 9001:2008 or its revision or other Mutu Management System recognized from the Program Certification Management System (s) which have been accredited by the Program or the Management System accreditation institution The quality of which has signed the Mutual Recognition of Arrangement (MRA) is with the right.
(4) Audit of the application of the Mutu Management System as referred to in paragraph (3) is performed at:
a) Next survey after enacted Regulation of this Minister for the Company which has owned SPPT-SNI Hose Hose for LPG Gas Compor; or
b) after filing a plea on LSPro for companies that do not yet have SPPT-SNI or which file an extension of SPPT-SNI.
Section 7
LSPro as referred to in Section 6 of the paragraph (1) must publish the SPPT-SNI Hose Hose for LPG Gas Compor with a minimum listing information about:
a. company name and address;
B. factory address;
c. The Company ' s responsible name;
D. brand;
e. name and importer address;
f. The number and title of the SNI; and
G. type of product.
Section 8
(1) The LSPro as referred to in Section 6 of the paragraph (1) is required to report on the issuer of the SPPT-SNI as a result of the issuer of 7 (seven) business days since the issuer of the SPPT-SNI to the Director General of the Industry and Head of BPKIMI.
(2) LSPro which publishes SPPT-SNI SNI Hose Hose for LPG Gas Compor is responsible for the implementation of the SNI sign-use of the SPPT-SNI sign published as much as 1 (one) times in 1 (one) year.
Section 9
Any Rubber Hose for LPG Gas Company as referred to in section 2, which is traded within the country, which is derived from the results of domestic production or import must meet the requirements of the SNI as referred to in Article 3.
Article 10
(1) Rubber Hose for LPG Gas Company as referred to in Article 2 that does not comply with the provisions as referred to in Article 9 is prohibited from circulating and must be destroyed.
(2) Rubber Hose for LPG Gas Company as referred to in Article 2 that has circulated in the market originating from domestic production as well as not meeting the provisions as referred to in Article 9 should be withdrawn from the circulation and was destroyed by the manufacturer.
(3) Rubber Hose for LPG Gas Compor as referred to in Section 2 of the import as well as not meeting the provisions as referred to in Section 9 if entered into the Indonesian Pabean region is required to be completed by the provisions of the laws.
(4) The order of product withdrawal from circulation and annihilation as referred to in paragraph (1) and paragraph (2) is conducted under the provisions of the laws.
Section 11
(1) The coaching and supervision of the implementation of the application of SNI as referred to in Article 2 is conducted by the Directorate General of Industry Pembina exercised by the PPSP.
(2) Surveillance as referred to in paragraph (1) is performed against products ranging from pre-market to the circulation of products in the market held at least one (one) times in a year.
(3) In conducting oversight as referred to in paragraph (1) the Directorate General of Industrial Pembina can coordinate with the Provincial Service and or the County/City Service or related agencies.
(4) BPKIMI carries out coaching on the Institution Assessment Institute in order of application of SNI Hose Tubes for LPG Gas Compor.
(5) In carrying out coaching as referred to in paragraph (4), BPKIMI may provide a written reprimand and sanction to LSPro that does not submit a report as referred to in Article 8 in accordance with the rules It's
Article 12
The offender, LSPro and or the Laboratory of Testing which commits a violation of the provisions in the Regulation of this Minister are subject to sanction in accordance with the provisions of the laws.
Section 13
Director General Pembina Industry sets the Technical Lead and Supervision Supervision of the SNI Lapse Rubber for the LPG Gas Complactees.
Section 14
SPPT SNI Hose Rubber for LPG Gas Company as referred to in Article 2 published before promulctored the Regulation of this Minister is stated to still apply in accordance with the applicable SPPT SNI period.
Section 15
The Managing Regulation governed under the Regulation of the Minister of Industry Number 85/M-IND/PER/11/2008 on the Treatment of Indonesian National Standards (SNI) Against 5 (five) Industrial Products Concurrent as amended by Regulation. Minister of Industry Number 129/M-IND/PER/12/2010 related to Rubber Hose for LPG Gas Compor as referred to in Article 2 is stated still in effect as long as not contradictory and has not been replaced under this Minister's Regulation.
Article 16
At the time the Regulation of the Minister applies the provisions relating to the Rubber Hose For Gas Stove as referred to in Article 2 of the Regulation Minister of Industry Number 85/M-IND/PER/11/2008 on the Treatment of Indonesian National Standards (SNI) Against 5 (five) Industrial Products Concurrent as amended by the Regulation Minister of Industry Number 129/M-IND/PER/12/2010 is revoked and declared not applicable.
Article 17
The Regulation of the Minister begins on the date of the promulctest.
For each person to know it, the Minister's Rule is promulred by its placement in the News of the Republic of Indonesia.
Specified in Jakarta
on February 14, 2012
MINISTRY OF INDUSTRY
REPUBLIC lNDONESIA
MOHAMAD S. HIDAYAT
promulred in Jakarta
on 20 February 2012
MINISTER OF LAW AND HUMAN RIGHTS
REPUBLIC OF INDONESIA
AMIR SYAMSUDIN
* has not been in the form of free sheets
