Notice To Importers Of Certain Industrial And Agricultural Products Eligible For The Benefit Of Community Tariff Quotas At Low Or Zero (Autonomous Quotas)

Original Language Title: Avis aux importateurs de certains produits industriels et agricoles admissibles au bénéfice de contingents tarifaires communautaires à droits réduits ou nuls (contingents autonomes)

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$20 per month, or Get a Day Pass for only USD$4.99.
JORF n ° 1 of January 1, 2003, page 109 text no. 111 NOTICE notice to importers of certain industrial and agricultural products eligible for the benefit of Community tariff quotas at low or zero (autonomous quotas) NOR: ECOD0261052V ELI: not available importers attention is drawn to the publication in the Official Journal of the communities European no. L 348/02 of Regulation (EC) No. 2287/02 , amending the provisions of the Regulation (EC) no 2505/96 (OJEC No. L 345/96) as follows: i.-the initial volume of the tariff quotas open from 1 January to 31 December 2002 (1) under Nos 09.2711, 09.2837 and 09.2959 order is worn respectively for each of them to 375 000, 450 tonnes and 77 000 tonnes to the title of this quota period.
The initial volume of open tariff quotas from 1 July to 31 December 2002 (1) under order 09.2902 and 09.2935 numbers is door respectively, as part of the quota period, 20,000 units and 70,000 tonnes.
II. Tariff quotas at reduced or zero right beginning on or after January 1 or, as appropriate, as of 1 July 2003 are listed in annexes I A and I B of this notice.


A N N E X E I A you can see the table in the OJ No 1 of 01/01/2003 page 109 to 114 A N N E X E F B you can consult the table in the JO No. 1 from 01/01/2003 page 109 to 114 a) in addition, these products must meet the following physical specifications : - goods codes NC ex 7209.16.90 and ex 7209.17.90: hard steel containing by weight between 0.64% and 0,70% of carbon for mounting-conveyor strips production characterized by a temperature of eligible operation of 400 ° C and a tensile strength of 1 200 N/mm² (10%). Other elements or properties to special technical specifications (HM 1708);
-products falling within codes ex 7219.32.10 NC 11/12, ex 7219.33.10 11/12 and ex 7219.34.10 11/12: stainless steel "NICRO" destined for the production of characterized by a temperature of eligible operation of 350 ° C mounting to conveyor bands.
I type: tensile strength of 1 050 N/mm² (10%). Chemical composition: maximum carbon content of 0.06%, 13% chromium content, 4% nickel content. Other elements and properties according to special technical specifications (HM 1708).
Type ii: the tensile strength of 1 200 N/mm² (15%). Chemical composition: maximum carbon content of 0.15%, 17% chromium content, 7% nickel content. Other elements and properties according to special technical specifications (HM 1708);
-products falling within code NC ex 7219.33.10 13/14/15/16/17/18 and 7219.34.10 13/14/15/16/17/18: stainless steel for mounting-conveyor strips production.
Type i: 1 200 N/mm² tensile strength. Chemical composition: carbon content of 0.1%, 0.6% Silicon content, 1.4% manganese content, 17.5% chromium content, 7.5% nickel content. Other elements and properties according to special technical specifications (HM 1712).
Type ii: 1 200 N/mm² tensile strength. Chemical composition: carbon content of 0.06%, 0.6% Silicon content, 1.4% manganese content, 18.5% chromium content, 8.5% nickel content. Other elements and properties according to special technical specifications.
Type iii: 1 000 N/mm² tensile strength. Chemical composition: carbon content of 0.05%, 0.6% Silicon content, 1.7% manganese content, 17.5% chromium content, 12.5% nickel content, 2.7% molybdenum content. Other elements and properties according to special technical specifications.
Type iv: 1 080 N/mm² tensile strength. Chemical composition: maximum carbon content of 0.05%, maximum 1% Silicon content, 13% chromium content, 4% nickel content, content of 0.3% titanium. Other elements and properties according to special technical specifications (HM 1710).
Type v: 1 150 N/mm² tensile strength. Chemical composition: maximum carbon content of 0.08%, 1.5% Silicon content, chromium content of 14%, 7% nickel content, copper content of 0.7%. Other elements and properties according to special technical specifications (HM 1701).
Type vi: 1 200 N/mm² tensile strength. Chemical composition: 0.03% carbon, 0.6% Silicon content, chromium content of 15.25%, 4.9% nickel content, copper content of 3.25%. Other elements and properties according to special technical specifications.
Note. -The composition of products a, b, c (i-vi) may vary within the limits of the current analysis standards.

Related Laws