Advanced Search

Executive Order On Danish Radio Interface No. 00 023 For Active Medical Implants With Low And Ultra Low Transmit Power

Original Language Title: Bekendtgørelse om Dansk radiogrænseflade nr. 00 023 for aktive medicinske implantater med lav og ultra lav sendeeffekt

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
Table of Contents
Appendix 1 Danish radio interface no. 00 023 for active medical implants with low and ultra low transmitting power,

Publication of Danish radio interface no. 00 023 for active medical implants with low and ultra low transmitting power,

Under section 9 of the law on radio and telecommunications terminal equipment and electromagnetic conditions, cf. Law Order no. 823 of 3. July 2007 :

§ 1. For active medical implants with low and ultra low power, the following Danish radio interfaces are subject to the following Danish radio interface (s), cf. Annex 1 : Danish radio interface no. 00 023 for active medical implants with low and ultra low seatpower.

§ 2. The announcement shall enter into force on 1. June 2014.

Paragraph 2. Publication no. 461 of 23. May 2012 on the Danish radio interface no. 00 023 for active medical implants with low and ultra low end-of-sensor effects are deleted.

Corporate Authority, the 20th. May 2014

Betina Hagerup

-Per V Christensen


Appendix 1

Danish radio interface no. 00 023 for active medical implants with low and ultra low transmitting power,

Frequencies, seat-effects, authorisations, etc.

No!
Parameter
Description
Status
1
Service according to ITU Radioreglement
Mobile service
N
2
Use
Active medical implants with low and ultra low seatpower implants
N
3
Allowed frequency bands
Tape
Frequencies
N
Tape a
9-315 kHz
Tape B
315-600 kHz
Tape c
12,5-20,0 MHz
Tape d
30,0-37,5 MHz
Tape e e
401-402 MHz
Tape f
402-405 MHz
Tape g
405-406 MHz
Tape h
2483,5-2500,0 MHz
4
Maximum Allowed Shipping Effects
Tape
Maximum allowed field forces / send effects
N
Tape a
30 dB µ A/m at 10 metres
Tape B
-5 dB µ A/m at 10 metres.
Tape c
-7 dB µ A/m at 10 metres
Tape d
1 mW e.r.p.
Tape e e
25 µ W e.r.p.
Tape f
25 µ W e.r.p.
Tape g
25 µ W e.r.p.
Tape h
10 mW e.i.r.p.
5
Channel spacing
Tape
Channel spacing
N
Tape a
No Restrictions
Tape B
No Restrictions
Tape c
No Restrictions
Tape d
No Restrictions
Tape e e
25 kHz
Tape f
25 kHz
Tape g
25 kHz
Tape h
1 MHz
6
Duty cycle
Tape
Duty cycle
N
Tape a
10%.
Tape B
10%.
Tape c
10%.
Tape d
10%.
Tape e e
Note 1) or 0.1%
Tape f
Note 2)
Tape g
Note 1) or 0.1%
Tape h
Note 1) or 10% of the 10%
Note 1)
The approach to frequencies and mitigation techniques must be used to give at least the same benefit as the techniques described in harmonized standards adopted in accordance with Directive 1999 /5/EC.
Note 2)
Other approaches to frequencies and remedying techniques may be used for interference, including tape spreads of more than 300 kHz, giving at least the same service as the techniques described in harmonised standards adopted in Directive 1999 /5/EC, in order to ensure operational compatibility with other users, including, in particular, meteorological radioprobes.
7
Permission ratiation
The possibilities for using radio frequencies without authorization are shown in the publication of the use of radio frequencies without permission, as well as on amateur radio robber and call signs, etc.
N
8
Harmonised standards
Tape
Harmonised Standard
I
Tape a
A 302 195-2
Tape B
ONE 300 330-2
Tape c
ONE 300 330-2
Tape d
ONE 300 220-2
Tape e e
A 302 537-2
Tape f
A 301 839-2
Tape g
A 302 537-2
Tape h
A 302 559-2
9
References
ERC / REC 70-03
Commission Decision 2006 /771/EC, as last amended by implementation decision 2013 /752/EU
I

N = Normative

I = Information

Requestation of laws, regulations, standards, etc.

Radio interfaces and relevant laws and notices may be obtained from the Homepage ' s Home page www.erst.dk.

The ETSI documents ((I) ETS, EN ' s and TBRs) can be retrieved from the ETSI website www.etsi.org.

ECC publications, including ECC Decisions and Recommendations, may be obtained at : ECO, European Communications Office, Nyropsgade 37, 4., 1602 Copenhagen V, tlf. 3389 6300, fax : 3389 6330. For more information, please refer to the ECO website www.cept.org/eco, from which the documents can also be obtained free of charge.

ISO/CEN/CENEC/IEC/DS standards may be purchased at Danish Standard, Collegiine vej 6, 2920 Charlottenlund, tlf. : 3996 6101, fax : 3996 6102, or via www.ds.dk.