Change Decree. Hygien.požadavcích Of Products In Contact With Food

Original Language Title: změna vyhl. o hygien.požadavcích na výrobky ve styku s potravinami

Read the untranslated law here: https://www.global-regulation.com/law/czech-republic/518507/zmna-vyhl.-o-hygien.poadavcch-na-vrobky-ve-styku-s-potravinami.html

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Get a Day Pass for only USD$49.99.
207/2006 Coll.
DECREE


Dated 5 May 2006

Amending Decree of the Ministry of Health no. 38/2001 Coll., On
hygiene requirements for products intended for contact with food and
dishes, as amended by Decree no. 186/2003 Coll.

Ministry of Health, pursuant to § 108 paragraph. 1 of Law no.
258/2000 Coll., On protection of public health and amending some
related laws, as amended by Act no. 274/2003 Coll. and Act no. 392/2005 Coll
. (hereinafter the "Act") to implement § 26 par. 1 point. b) and d) of the Act
:
Article I


Decree no. 38/2001 Coll., On hygienic requirements on products intended
contact with food and meals, as amended by Decree no. 186/2003 Coll., Is amended as follows
:

First In § 1, paragraph 1, including footnotes Nos. 1, 1a and 1b reads:

"(1) This decree ^ 1) transposes the relevant European Community
^ 1) and regulates the hygienic requirements on materials and articles intended
contact with food prepared directly applicable European Communities regulation
^ 1b ) (hereinafter referred to as "articles intended for contact with food
").

1) issued on the basis and within the law, to which it has already been
relevant regulations of the European Communities projected.

1) Council Directive 78/142 / EEC of 30 January 1978, which concerns the approximation
law of the Member States relating to materials that contain
vinyl chloride monomer and are intended to come into contact with foodstuffs. | ||
Commission Directive 80/766 / EEC of 18 July 1980, which establishes
method of analysis for the official control of the amount of vinyl chloride monomer
in materials and articles intended to come into contact with foodstuffs
. | ||
Commission Directive 81/432 / EEC of 29 April 1981, which establishes
analytical method for the official control of vinyl chloride released
materials and articles into food.

Council Directive 82/711 / EEC of 18 October 1982, which establishes the basic
rules for migration testing components, plastics and articles thereof
manufactured and intended for contact with food.

Council Directive 84/500 / EEC of 15 October 1984 concerning the approximation
laws of the Member States relating to ceramic
articles intended for contact with food.

Council Directive 85/572 / EEC of 19 December 1985, which establishes a list
food simulants used for migration testing components
plastics and articles made therefrom and intended for contact with food.

Commission Directive 93/10 / EEC of 15 March 1993, which relates
materials and articles made of regenerated cellulose film from contact with
food.

Commission Directive 93/11 / EEC of 15 March 1993, which concerns the determination
N-nitrosamines and N-nitrosatable substances released from teats and teats
made of elastomer or rubber.

Commission Directive 93/111 / EC of 10 December 1993 amending
Directive 93/10 / EEC relating to materials and articles made of cellophane
intended for contact with food.

Commission Directive 97/48 / EC of 29 July 1997 amending for the second
Council Directive 82/711 / EEC laying down the basic rules
necessary for testing migration of the constituents of the materials and articles
plastics intended for food contact.

Commission Directive 2002/72 / EC of 6 August 2002 on materials and articles
plastics intended for food contact.

Commission Directive 2004/1 / EC of 6 January 2004 amending Directive
2002/72 / EC, to suspend the use of azodicarbonamide as blowing
plastics.

Commission Directive 2004/14 / EC of 29 January 2004 amending and supplementing
Directive 93/10 / EEC, which covers materials and products
made from foil of regenerated cellulose (cellophane)
and intended for contact with food.

Commission Directive 2004/19 / EC of 1 March 2004, amending and supplementing
Directive 2002/72 / EC relating to materials and articles of plastics
intended for contact with food.

1b) European Parliament and Council Regulation (EC) no. 1935/2004 of 27
October 2004 on materials and articles intended to come into contact with food and
repealing Directives 80/590 / EEC and 89 / 109 / EEC. ".

second in § 3, paragraph 6, including footnote no. 1c reads:

" (6) Materials and articles of plastics, paints, coatings and
articles covered by surface coatings, and adhesives which contain, or are
made of one or more of the following substances

) 2,2-bis [4- (2,3-epoxypropoxy) phenyl] propane, and some of its derivatives,


B) bis (2,3-epoxypropyl) ether, bis (hydroxyphenyl) methane, and some of their derivatives
,

C) novolac glycidyl ethers, and some of their derivatives,

Must comply with the requirements of the directly applicable European Communities ^
1c).

1c) Commission Regulation no. 1895/2005 of 18 November 2005 on the restriction
use of certain epoxy derivatives in materials and articles intended for food contact
.. "

Third V § 4, paragraph 1 reads:

"(1) to verify the hygienic requirements laid down by this decree
using validated analytical methods according to the rules and conditions laid down in Annexes
Nos. 1 to 14 to this Decree. If the method is not
to be modified, you can use the method with appropriate characteristics
with regard to the relevant hygienic limit established by the decree. ".

Existing footnote no. 1 is repealed.
| || 4th in § 11 paragraph 3 reads:

"(3) the lists of substances under Annex no. 3 hereto exclude

A) monomers and other starting materials and additives used in the manufacture

First surface coatings obtained from resinous or polymerised products in liquid, powder
or dispersion form, such as varnishes and paints,

Second epoxy resins,

Third adhesives and adhesion promoters,

Fourth inks, or

B) colorants

C) solvents. ".

Fifth Under § 11 the following § 11a, which, including footnote no. 3
reads:

" § 11a || |
(1) If the production of plastic products intended for contact with food
used ingredients that are approved as additives in foods or as
flavorings food under special legislation
^ 3 ), not these substances are released into the food

A) in quantities having a technological function in the finished
food

B) which is authorized as food additives or substances
flavorings, in quantities exceeding the restrictions set
according to special regulations or restrictions provided for in § 11;
Compliance with this provision is assessed by restriction, which is
stricter

C) which are not permitted as food additives or flavorings substances
in quantities exceeding the restrictions provided for in § 11th

3) Act no. 110/1997 Coll., On foodstuffs and tobacco products and
amending and supplementing some related laws, as amended
regulations.

Decree no. 304/2004 Coll., Laying down the types and conditions of use
additives and excipients in the production of foodstuffs, as amended by Decree no. 152/2005 Coll
. and Decree no. 431/2005 Coll.

Decree no. 447/2004 Coll., On requirements for the amount and types of substances
food flavorings, conditions for their use, requirements for
their safety and conditions for the use of quinine and caffeine. ". || |
sixth in § 13 paragraph 9 reads:

"(9) the substances listed in Annex no. 3 hereto in
incomplete list of additives which may be used for the production of plastics,
its section B, when verifying compliance with their migration
specific migration limits in simulant D or in test media of substitute
migration tests described in Annex no. 4 hereto.. "

7. In § 23 paragraph 5 reads:

"(5) Paragraphs 2-4 shall not apply to cellophane gut.".

eighth in § 23, the following paragraph 6 is added:

"(6) In accordance with paragraph 2 of cellophane films include regenerated cellulose

A) uncoated,

B) a coating derived from cellulose

C) coated with plastic.. "

Ninth after § 23 the following § 23a shall be added:

" § 23a

(1) During the production of films from regenerated cellulose according to § 23 para. 6 point.
) And b) can be used only substances or groups of substances covered in Annex.
13 hereto, their Parts I and II, under the conditions laid down in this Annex
. The production of films from regenerated cellulose according to § 23 paragraph
. 6 point c) only substances or groups of substances covered in
Annex no. 3 hereto.

(2) Products intended for contact with food made from sheets of regenerated cellulose
according to § 23 para. 6 point. c) must be in accordance with
requirements stipulated in § 12 to 14 ".

10th Annex no. 2 is repealed.

11th Annex no. 3 reads: | ||
"Annex no. 3 to Decree no. 38/2001 Coll.

Requirements for plastics and plastic products


LIST monomers INGREDIENTS AND OTHER STARTING SUBSTANCES WHICH MAY BE USED FOR
manufacture of plastics

First This appendix contains a list of monomers and other starting ingredients
substances that may be used in the manufacture of plastics and plastic products,
intended for contact with food. The list includes:

1.1 substances undergoing polymerisation, which includes
polyaddition or any other similar process
macromolecules;

1.2 natural or synthetic macromolecular substances used for manufacturing
modified macromolecules, if the monomers or other starting
substances necessary for their manufacture are not included in the list;

1.3 substances used to modify existing natural or synthetic substances
;

1.4 substances that are added to plastics to achieve a technical effect
in the final product, including the polymer additives. These substances are
intended to be contained in the final products, while
polymeric additives for the purposes of this Annex shall mean all
polymers, prepolymers and oligomers, that can be added to plastics in order to achieve
technical effect which can not be used without other
polymers as the main structural component of finished materials and products;

1.5 substances that are used to create an environment in which
polymerization occurs (for example, emulsifiers, surfactants, buffers
).

For the purposes of this Annex, the substances referred to in paragraphs 1.4 and 1.5 below
referred to as additives.

Second In the list does not include salts of aluminum, calcium, iron, magnesium,
potassium, sodium and zinc, and ammonium salts (including double salts and acid salts
) authorized acids, phenols or alcohols, although
also be allowed. The name "salt" is listed only in the event that
corresponding free acid (free acid) is not listed
(not listed). In such cases, the term "salts" refers to salts
"aluminum, calcium, iron, magnesium, potassium, sodium, zinc
and ammonium salts."

Third The list does not include the following substances although they may be present
:

A) substances that may be present in the final product:

- Impurities in the substances;

- Reaction intermediates;

- Decomposition products;

B) oligomers and natural or synthetic macromolecular substances and their mixtures
if the monomers or starting substances necessary for their synthesis
included in the list;

C) mixtures of the authorized substances;

D) substances which directly influence the formation of polymers (eg.
Catalytic systems);

E) colorants;

F) solvent.

Products that contain the substances referred to in subparagraphs a) to c)
must meet the requirements provided for in § 3. 1st

Fourth Substance shall have a good technical quality as regards the purity criteria
.

Fifth Food contact can only use products obtained by bacterial fermentation
in Appendix I to this Annex.

6th The list contains the following information:

- Column 1 (PM / REF no.) Reference number of the EEC packaging material
substances on the list;

- Column 2 (CAS) CAS Registry Number (Chemical Abstracts Service
);

- Column 3 (Name): the chemical name;

- Column 4 (Restrictions and / or specifications): May contain

- Specific migration limit (SML)

- Maximum permitted quantity of the substance in the finished material or article
(QM)

- Maximum permitted quantity of the substance in the finished material or article
expressed as mg per 6 dm2 of the surface in contact with foodstuffs (QMA)

- Any other restriction specifically mentioned,

- Any type of specifications related to the substance or polymer.

7th If a substance is listed individually, are also
a generic term, is subject to the restrictions mentioned this at
individually listed substances.

8th If a CAS number does not match the chemical name, the chemical name
precedence over the CAS number. If a CAS number EINECS
by the registry does not match the CAS Registry applies the CAS Registry.

9th In the tables, in the column 4 are used abbreviations and terms having the following meanings
:

DL = detection limit of the analytical method;

FP = Finished material or article;

NCO = isocyanates;

ND = not be detected. For the purposes of this decree means that the substance

Not be detected validated analytical method specified
limit of quantification (DL). If such a method does not currently exist
, proceed to the development of validated methods
procedure under § 4 para. 1 of the ordinance.

QM = maximum permitted quantity of the residual substance in the material or product
. For the purposes of this Decree, the amount of substance in the material or product
provides validated analytical method. If such a method
currently exist, it proceeds to the development of validated methods
procedure under § 4 para. 1st

QM (T) = maximum permitted quantity of the residual substance in the material or product
expressed as total of moiety or substance.
For the purposes of this Order, the amount of substance in the material or article should be determined
validated analytical method. If such a method
currently exist, it proceeds to the development of validated methods
procedure under § 4 para. 1st

QMA = Maximum permitted quantity of the residual substance in the material or
article expressed as mg per 6 dm2 of the surface in contact with foodstuffs.

QMA (T) = maximum permitted quantity of the residual substance in the material or product
expressed as total of moiety or substance in
mg per 6 dm2 of the surface in contact with foodstuffs. For the purposes of this decree would
quantity of the substance in the material or article should be determined
validated analytical method. If such a method does not currently exist
proceed to the development of validated methods of procedure under § 4 para.
First

SML = specific migration limit in food or in food simulant
, unless otherwise stated. For the purposes of this decree should be
value of the specific migration of substances from the material or product set
validated analytical method. If such a method does not currently exist
, proceed to the development of validated methods
procedure under § 4 para. 1st

SML (T) = specific migration limit in food or in food simulant
expressed as total of substances or groups of substances
. For the purposes of this Decree, the value of the specific migration of the substance or group of substances
material or product, determined by validated analytical method
. If such a method does not currently exist
progresses until the development of validated methods of procedure under § 4 para. 1st

LIST OF ALLOWED MONOMERS AND OTHER STARTING SUBSTANCES
SECTION A

----------------------------------------------- ------------------------------------------------ || | PM / REF No. CAS No Name Restrictions and / nebospecifikace
(1) (2) (3) (4)
----------------------------------- -------------------------------------------------- ----------
10030 000514-10-3 abietic acid
10060 000075-07-0 acetaldehyde SML (T) = 6 mg / kg (2)
10090 000064-19 -7 acetic acid
10120 000108-05-4 vinyl acetate SML = 12 mg / kg 10150 000108-24-7 acetic anhydride

10210 000074-86-2 acetylene
10599 / 90A 061788- 89-4 fatty acid, unsaturated QMA (T) = 0.05 mg / 6 dm2 (27)
(C18), dimers, distilled 10599/91 061788-89-4
fatty acids, unsaturated QMA (T) = 0.05 mg / 6 dm2 (27)
(C18), dimers, undistilled
10599 / 92A 068783-41-5 fatty acids, unsaturated QMA (T) = 0.05 mg / 6 dm2 (27)
(C18), dimers, hydrogenated

distilled 10599/93 068783-41-5 fatty acids, unsaturated QMA (T) = 0.05 mg / 6 dm2 (27)
(C18), dimers, hydrogenated
undistilled
10630 000079-06-1 acrylamide SML = ND (DL = 0,01 mg / kg)
10660 015214-89-8 2-acrylamido-2- SML = 0.05 mg / kg
methylpropanesulphonic acid
10690 000079-10-7 acrylic acid
10750 002495-35-4 benzyl acrylate
10780 000141-32-2 n-butyl acrylate
10810 002998-08-5 sec- butyl acrylate
10840 001663-39-4 tert-butyl acrylate
11000 050976-02-8 dicyclopentadienyl acrylate QMA = 0.05 mg / dm2 6
11245 002156-97-0 dodecyl acrylate SML = 0.05 mg / kg (1)
11470 000140-88-5 ethyl acrylate
11510 000818-61-1 hydroxyethyl acrylate see. monoester of acrylic acid
ethylene glycol
11530 000999-61-1 2-hydroxypropyl acrylate QMA = 0.05 mg / dm2 for the sum of 6 2-
hydroxypropyl acrylate and 2-
hydroxyisopropyl acrylate
in accordance with specifications

set out in Appendix II to this
Annex.
11590 00106-63-8 isobutyl acrylate
11680 000689-12-3 isopropyl acrylate
11710 000096-33-3 methyl acrylate
11830 000818-61-1 monoester of acrylic acid || | ethylene glycol
11890 002499-59-4 n-octyl acrylate
11980 000925-60-0 propyl acrylate
12100 000107-13-1 acrylonitrile SML = ND
(DL = 0.020 mg / kg, including
measurement uncertainty)
12130 000124-04-9 Adipic acid
12265 004074-90-2 divinyl adipate QM = 5 mg / kg in FP.Pro use | || only as a comonomer.

Adipanhydrid 002035-75-8 12280 12310 - 12340
albumin - albumin coagulated
formaldehyde
12375 - alcohols, aliphatic, with one
OH, saturated, linear,
primary (C4-C22)
12670 002855-13-2 1-amino-3,5,5-3aminomethyl SML = 6 mg / kg
trimethylcyclohexane
12761 000693-57-2 12-aminododecanoic acid SML = 0.05 mg / kg
12763 00141-43-5 2-aminoethanol SML = 0.05 mg / kg. Not to be
used in polymers contacting
food proněž be
according to Annex No. 4 to this Decree
simulant D substance may be
used only for indirect contact
Food, separate layer
PET
12765 84434-12-8 N- (2-aminoethyl) -N-alanine, sodium SML = 0.05 mg / kg
Salt
12788 002432-99-7 11-aminoundecanoic acid SML = 5 mg / kg 12789 007664-41-7 ammonia

12820 000123-99-9 azelaic acid
nonanedioic acid 12970 004196-95-6 azelanhydrid

anhydrite nonanedioic acid
13000 001477-55-0 1,3-benzenedimethanamine SML = 0.05 mg / kg
1,3-bis (aminomethyl) benzene
13060 004422-95-1 1,3,5- trichloride QMA = 0.05 mg / 6 dm2 (measured as
benzenetricarboxylic acid, 1,3,5-benzenetricarboxylic | || benzene-1,3,5 acid)
tri (carbonyl)
13075 000091-76-9 benzoguanamine viz.2,4-diamino-6-phenyl-1,3,5
triazine
13090 000065-85-0 Benzoic acid
13150 000100-51-6 000498-66-8 13180
benzyl bicyclo [2.2.1] hept-2-en (= SML = 0,05 mg / kg
norbornene)
13210 001761-71-3 bis (4-aminocyclohexyl) methane SML = 0.05 mg / kg
13323 000102-40-9 1,3-bis (2-hydroxyethoxy) benzene SML = 0.05 mg / kg 13326 000111-46-6
bis (2-hydroxyethyl) ether, diethylene see
13380 000077-99-6 2,2-bis (hydroxymethyl) butan-1-one see , 1,1-trimethylolpropane
ol;
2-ethyl-2- (hydroxymethyl) propane
1,3-diol
13390 000105-08-8 1,4-bis (hydroxymethyl) cyclohexane
13395 04767-03-7 2,2-bis (hydroxymethyl) propanoic QMA = 0.05 mg / dm2 6
acid
13480 000080-05-7 2,2-bis (4-hydroxyphenyl) propane SML (T) = 0.6 mg / kg (28)
4,4 '- (propane-2,2-diyl) diphenol
bisphenol A
13510 001675-54-3 2,2-bis (4-hydroxyphenyl) propane According to the requirements of Commission Regulation
bis (2,3-epoxypropyl) ether č.1895 / 2005 dne18.listopadu
(= BADGE); 2005 on the restriction of use of certain
2,2-bis [4- (2,3-epoxy derivatives in materials and
epoxypropoxy) phenyl] propane articles intended to come into contact
Food
13530 038103-06-9 2,2-bis (4-hydroxyphenyl) propane SML = 0.05 mg / kg
bis (phthalic anhydride)
13550 000110-98-5 bis (hydroxypropyl) ether, dipropylene see
13560 005124-30-1 Bis (4- see. dicyclohexylmethane-4,4'
isocyanatocyclohexyl) -methane diisocyanate | || 13600 047465-97-4 3,3-bis (3-methyl-4-hydroxyfenyl- SML = 1.8 mg / kg
indoline-2-one
13607 000080-05-7 bisphenol A, see .13480
2,2-bis (4-hydroxyphenyl) propane

13610 001675-54-3 bisphenol A bis (2,3 see. 13510
epoxypropyl) ether of 2,2-bis (4 hydroxyphenyl) propane
(= BADGE) bis (2,3-epoxypropyl) ether
13614 038103-06-9 bisphenol A bis (phthalic anhydride) viz.13530
13617 00080-09-1 bisphenol S see. 4,4'-dihydroxydiphenyl
13620 010043-35-3 boric acid SML (T) = 6 mg / kg (23) (
expressed as boron) without prejudice

provisions relating to indicators
quality of drinking vodypodle
special regulation
13630 000106-99-0 butadiene QM = 1 mg / kg in FPnebo SML = ND
(DL = 0.02 mg / kg, including
measurement uncertainty)
13690 000107-88-0 butane-1,3-diol
13720 000110-63-4 butane-1,4-diol SML (T) = 0.05 mg / kg (24)
13780 002425-79-8 1,4-butanediol bis (2,3-QM = 1 mg / kg in FP (expressed as
epoxypropyl) ether; epoxy group, molecular
1,4-bis (2,3-epoxypropoxy) butane weight = 43)
13810 00505-65-7 butane-1,4-diolformal; QMA = 0.05 mg / dm2 6
1,3-dioxepane
13840 000071-36-3 butan-1-ol
13870 000106-98-9 1-butene
13900 000107-01-7 but-2-ene
13932 00598-32-3 but-3-en-2-ol QMA = ND (DL = 0,02mg / 6dm2).
When used as a copolymer for
preparing a polymerization ingredients
14020 000098-54-4 4-tert-butylphenol SML = 0.05 mg / kg 14110 000123-72-8
butyraldehyde;
butanoaldehyde
14140 000107-92-6 butyric acid;
butanoic acid
14170 000106-31-0 anhydride butyric acid;
butananhydrid
14200 000105-60-2 caprolactam; SML (T) = 15 mg / kg (5)
hexane-6-lactam
14230 002123-24-2 caprolactam, sodium salt; SML (T) = 15 mg / kg (5)
hexane-6-lactam, sodium salt (expressed as caprolactam)
14320 000124-07-2 caprylic acid;
octanoic acid 14350 000630-08-0

CO 14380 000075-44-5 carbonyl QM = 1 mg / kg in FP 14411 008001-79-4

14500 castor oil 009004-34- 6 cellulose
14530 007782-50-5 000106-89-8 chloro
14570 1-chloro-2,3-epoxypropane see epichlorohydrin
14650 000079-38-9 chlortrifluorethen QMA = 0.05 mg / kg
14680 000077-92-9 citric acid
14710 000108-39-4 m-cresol
14740 000095-48-7 o-cresol
14770 00106-44-5 p-cresol
14800 003724-65-0 crotonic acid; QMA (T) = 0.05 mg / 6 dm2 (33)
(E) -but-2-enoic acid
14841 000599-64-4 4- (1-phenyl-1-methylethyl) phenol SML = 0.05 mg / kg
4-cumylphenol
14880 000105-08-8 1,4-cyclohexanedimethanol, see 1,4-bis (hydroxymethyl)
cyclohexane
14950 003173-53-3 cyclohexyl isocyanate QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
15030 00931-88-4 cyclooctene SML = 0,05 mg / kg. The substance may be
used in polymers contacting
food prokteré according
Annex no. 4 hereto
determined using simulant A
15070 001647-16-1 deca-1,9-diene SML = 0.05 mg / kg 15095 000334-48-5

decanoic acid 15100 000112-30-1 decan 1-ol
15130 000872-05-9 dec-1-ene SML = 0.05 mg / kg
15250 000110-60-1 1,4-diaminobutane
15272 000107-15-3 1 2-diaminoethane, see ethylenediamine
15274 000124-09-4 1,6-diaminohexane see hexamethylenediamine
15310 000091-76-9 2,4-diamino-6-phenyl-1,3,5 QMA = 5 mg / 6 dm2
triazine;
6-phenyl-1,3,5-triazine-2,4-diamine
15565 000106-46-7 1,4-dichlorobenzene SML = 12 mg / kg
15610 00080-07-9 4,4 ' -dichlordifenylsulfon SML = 0.05 mg / kg 15700 005124-30-1
dicyclohexylmethane-4,4'-QM (T) = 1 mg / kg in FP (expressed
diisocyanate; as NCO) (26)
bis (4-
isocyanatocyclohexyl) methane;
4,4'
metiylendiciklohexyil
15760 000111-46-6 bis (2-hydroxyethyl) ether; SML (T) = 30 mg / kg (3)
diethylene
15790 000111-40-0 diethylene SML = 5 mg / kg
15820 000345-92-6 4,4-difluoro SML = 0.05 mg / kg 15880 000120-80-9 1
, 2-dihydroxybenzene; SML = 6 mg / kg
benzene-1,2-diol
15910 000108-46-3 1,3-dihydroxybenzene; SML = 2.4 mg / kg
benzene-1,3-diol
15940 000123-31-9 1,4-dihydroxybenzene; SML = 0.6 mg / kg
benzene-1,4-diol
15970 000611-99-4 4,4'-dihydroxybenzophenone SML (T) = 6 mg / kg (15)
16000 000092-88-6 4,4'-dihydroxydiphenyl SML = 6 mg / kg
16090 00080-09-1 4,4'-dihydroxydiphenyl; SML = 0.05 mg / kg
4,4'-sulfonyl
16150 000108-01-0 2- (dimethylamino) ethanol SML = 18 mg / kg
16210 006864-37-5 3,3'-dimethyl-4,4' SML = 0.05 mg / kg (32)

diaminodicyclohexylmethane; For use in polyamides
4,4'-methylenebis (2-
methylcyclohexane-1-amine)
16240 000091-97-4 3,3'-dimethyl-4,4'-QM (T) = 1 mg / kg in FP (expressed
-diisocyanato; as NCO) (26)
4,4'methylenbis (2-
phenyl) diisocyanate;
bis (4-isocyanato-3-
methylphenyl) methane
16360 000576-26-1 2,6-dimethylphenol SML = 0.05 mg / kg
16390 00126-30-7 2,2-dimethylpropane -1,3-diol; SML = 0.05 mg / kg
neopentylglycol
16450 000646-06-0 1,3-dioxolane SML = 0.05 mg / kg 16480 000126-58-9 dipentaerythritol

16540 000102-09-0 diphenyl carbonate SML = 0,05 mg / kg 16570 004128-73-8
diphenylether-4,4'-diisocyanate QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
16600 005873-54- 1 diphenylmethane-2,4'-diisocyanate QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
16630 000101-68-8 diphenylmethane-4,4'-diisocyanate QM ( T) = 1 mg / kg in FP (expressed as NCO
) (26)
16650 000127-63-9 diphenylsulfone SML (T) = 3 mg / kg (25)
16660 000110-98- 5 dipropylene
16690 001321-74-0 divinylbenzene QMA = 0.01 mg / 6 dm2 or SML = ND
(DL = 0.02 mg / kg, including
measurement uncertainty) for the sum
divinylbenzene and
ethylvinylbenzene and in accordance with
specifications laid down
Appendix II to this Annex.
16694 013811-50-2 N, N'-divinylimidazolidin-2-one QM = 5 mg / kg in FP 16697 000693-23-2
dodecanedioic acid
16704 000112-41-4 dodec-1 ene SML = 0.05 mg / kg 16750 000106-89-8
epichlorohydrin QM = 1 mg / kg in FP 16780 000064-17-5 ethanol

16950 000074-85-1 ethylene;
ethene
16960 000107-15-3 Ethylenediamine SML = 12 mg / kg 16990 000107-21-1
ethane-1,2-diol; SML (T) = 30 mg / kg (3)
ethylene
17005 000151-56-4 ethylenimine SML = ND (DL = 0.01 mg / kg)
17020 000075-21-8 ethylene QM = 1 mg / kg in FP 17050
000104-76- 7 2-ethylhexane-1-ol SML = 30 mg / kg
17110 016219-75-3 5-ethylidenbicyklo [2.2.1] hept-2- QMA = 0.05 mg / dm2 6
en ratio between the size of the area and
the quantity of food must be less
2 dm2 / kg
17160 000097-53-0 eugenol; SML = ND (DL = 0.02 mg / kg, including
2-methoxy-4- (propen-2-yl) phenol) measurement uncertainty)
17170 061788-47-4 fatty acids, coconut || | 17200 068308-53-2 fatty acids, soya
17230 061790-12-3 fatty acids, tall oil
17260 000050-00-0 formaldehyde SML (T) = 15 mg / kg (22)
17290 000110-17-8 fumaric acid 17530 000050-99-7 glucose

18010 000110-94-1 glutaric acid 18070 000108-55-4 glutaric anhydride

18100 000056-81-5 glycerol | || 18220 068564-88-5 N-heptylaminoundekanová acid SML = 0.05 mg / kg (1) 18250 000115-28-6
hexachlorendomethylentetrahydro- SML = ND (DL = 0.01 mg / kg)
phthalic acid;
1,4,5,6,7,7-
hexachlorbicyklo [2.2.1] hept-5-ene
2,3-dicarboxylic acid
18280 000115-27-5 hexachlorendomethylentetrahydro- SML = ND (DL = 0.01 mg / kg)
phthalic anhydride;
anhydride 1,4,5,6,7,7-
hexachlorbicyklo [2.2.1] hept-5-ene
2,3-dicarboxylic acid
18310 036653-82-4 hexadecane-1-ol
18430 000116-15-4 hexafluoropropylene SML = ND (DL = 0.01 mg / kg)
18460 000124-09 -4 hexamethylenediamine SML = 2.4 mg / kg 18640 000822-06-0
hexamethylene diisocyanate; QM (T) = 1 mg / kg in FP (expressed
hexane-1,6-diyldiisokyanát; as NCO) (26)
1,6-diisocyanatohexane
18670 000100-97-0 hexamethylenetetramine SML (T) = 15 mg / kg (22)
(Expressed as formaldehyde)
18700 000629-11-8 hexane-1,6-diol SML = 0.05 mg / kg 18820 000592-41-6
hex-1-ene SML = 3 mg / kg | || 18867 000123-31-9 hydroquinone; see 1,4dihydroxybenzen
benzene-1,4-diol 000099-96-7
18880, p-hydroxybenzoic acid;
4-hydroxybenzoic acid
18896 001679-51-2 4- (hydroxymethyl) cyclohex-1-ene SML = 0.05 mg / kg
18897 016712-64-4 6-hydroxynaphthalene-2-carboxylic SML = 0 , 05 mg / kg
acid
18898 000103-90-2 N- (4-hydroxyphenyl) acetamide SML = 0.05 mg / kg 19000 000115-11-7 isobutene


19060 000109-53-5 isobutyl (vinyl) ether QM = 5 mg / kg in FP
19110 04098-71-9 [3- (isocyanatomethyl) -3,5,5- QM (T) = 1mg / kg in FP (expressed
trimethylcyclohexyl] isocyanate as NCO)) (26)
19150 000121-91-5 1,3-benzenedicarboxylic SML = 5 mg / kg
acid; isophthalic acid
19210 001459-93-4 dimethyl isophthalate SML = 0.05 mg / kg
19243 00078-79-5 isoprene see. 2-methylbut-1,3-diene
19270 000097-65-4 itaconic acid;
prop-2-ene-1,2-dicarboxylic

acid, lactic acid 19460 000050-21-5
19470 000143-07-7 lauric acid;
dodecanoic acid
19480 002146-71-6 vinyl laurate;
vinyl dodecanoate
19490 00947-04-6 laurolactam; SML = 5 mg / kg
dodecane-12-lactam
19510 011132-73-3 000110-16-7 19540 lignocellulose
maleic acid; SML (T) = 30 mg / kg (4)
(Z) -butenedioic acid
19960 000108-31-6 maleic SML (T) = 30 mg / kg (4) (expressed
as maleic acid)
19975 000108-78-1 melamine; see. 2,4,6-triamino-1,3,5-triazine
1,3,5-triazine-2,4,6-triamine
19990 000079-39-0 methacrylamide SML = ND
(DL = 0.02 mg / kg, including
measurement uncertainty)
20020 000079-41-4 methacrylic acid
20050 000096-05-9 allyl methacrylate SML = 0.05 mg / kg || | 20080 002495-37-6 benzyl methacrylate
20110 000097-88-1 butyl methacrylate
20140 002998-18-7 sec-butyl methacrylate
20170 000585-07-9 tert-butyl methacrylate
20260 00101-43-9 cyclohexyl methacrylate SML = 0.05 mg / kg
20410 02082-81-7 diester of methacrylic acid SML = 0.05 mg / kg
with butane-1,4-diol
20440 000097-90-5 diester of methacrylic acid with SML = 0.05 mg / kg
ethylene glycol
20530 002867-47-2 2- (dimethylamino) ethyl SML = ND
methacrylate (DL = 0.02 mg / kg, including
measurement uncertainty)
20590 00106-91-2 2,3-epoxypropyl methacrylate QMA = 0,02mg / 6 dm2
20890 000097-63- 2 ethyl methacrylate
21010 000097-86-9 isobutyl methacrylate
21100 004655-34-9 isopropyl methacrylate
21130 000080-62-6 methacrylate
21190 000868-77-9 monoester methacrylic acid
ethylene glycol
21280 002177-70-0 phenyl methacrylate
21340 002210-28-8 propyl methacrylate
21400 054276-35-6 sulfopropyl methacrylate QMA = 0.05 mg / dm2 6
21460 000760-93-0 methakrylanhydrid
21490 000126-98-7 methacrylonitrile SML = ND
(DL = 0.02 mg / kg, including
measurement uncertainty)
21520 01561-92-8 sodium methallylsulfonát SML = 5 mg / kg 21550 000067-56-1 methanol

21640 00078 -79-5 2-methylbut-1,3-diene QM = 1mg / kg FPnebo SML = ND
(DL = 0.02 mg / kg, including the uncertainty of measurement
)
21730 000563-45-1 3-methylbut-1-ene QMA = 0,006 mg / 6 dm2. Only for
use in polypropylene.
21765 106246-33-7 4,4'-methylenebis (3-chloro-2,6 QMA = 0.05 mg / dm2 6
diethylaniline)
21821 00505-65-7 1.4 - (methylenedioxy) butane-1,4-viz.butan diolformal
000924-42-5 21940 N-methylolacrylamide SML = ND (DL = 0.01 mg / kg)
22150 000691-37-2 4- (methyl) pent-1-ene SML = 0.05 mg / kg 22331 025513-64-8
mixture (35-45% wt.) 1,6-diamino QMA = 5 mg / dm2 6
2,2,4trimethylhexanu and (55-65%
weight) of 1,6-diamino-2,4,4-
trimethyl
22332 028679-16-5 mixture (40 wt.%) 2,2,4- QM (T) = 1 mg / kg in FP (expressed
trimethylhexane and 1,6 as NCO) (26 )
diyldiisokyanátu (60%)
2,4,4-trimethyl-1,6
diyldiisokyanátu
22350 000544-63-8 myristic acid;
tetradecanoic acid
22360 01141-38-4 naphthalene-2,6-dicarboxylic acid SML = 5 mg / kg

acid 22390 000840-65-3 2,6-dimethyl-SML = 0.05 mg / kg
naphthalenedicarboxylate
22420 003173-72-6 1,5-naphthalene diisocyanate QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
22437 00126-30-7 neopentylglycol see . 2,2-dimethyl-propane-1,3-diol
22450 009004-70-0 000143-08-8 nitrocellulose
22480 nonane-1-ol
22550 000498-66-8 norbornene See. bicyclo [2.2.1] hept-2-ene
22570 000112-96-9 oktadecylisokyanát; QM (T) = 1 mg / kg in FP (expressed
1-isokyanatooktadekan as NCO) (26)

22600 000111-87-5 octan-1-ol
22660 000111-66-0 oct-1-ene SML = 15 mg / kg 22763 000112-80-1
oleic acid
22775 000144 -62-7 oxalic acid SML (T) = 6 mg / kg (29)
22778 07456-68-0 4,4'-oxybis (benzensulfonylazid) QMA = 0.05 mg / dm2
6 22780 000057 -10-3 palmitic acid;
hexadecanoic acid
22840 000115-77-5 Pentaerythritol
22870 000071-41-0 pentan-1-ol 00109-67-1
22900 pent-1-ene SML = 5 mg / kg 22 937
001623-05-8 perfluorpropyl (perfluorvinyl) eth SML = 0.05 mg / kg
er

phenol 000108-95-2 22960 23050 000108-45-2 1,3-phenylenediamine SML = ND (DL = 0,02mg / kg
including measurement uncertainty)
23070 000102- 39-6 (1,3-phenylenedioxy) diacetic QMA = 0.05 mg / dm2 6
acid
23155 000075-44-5 phosgene see carbonyl
23170 007664-38-2 phosphoric acid
23175 000122-52-1 triethyl phosphite QM = ND (DL = 1 mg / kg in PBS) | || 23187 - phthalic acid, terephthalic acid see
23200 000088-99-3 o-phthalic acid
23230 000131-17-9 diallyl phthalate SML = ND (DL = 0.01 mg / kg)
23380 000085-44-9 phthalic anhydride
23470 000080-56-8 alpha-pinene
23500 000127-91-3 beta-pinene
23547 009016-00-6 polydimethylsiloxane (molecular to the specifications
063148-62-9 weight greater than 6800) set out in Appendix II to this
Annex

23590 025322-68-3 Polyethylene glycol 23650 025322-69-4 polypropylene (molecular weight greater than
400) 23651 025322-69-4 polypropylene

23740 000057-55-6 propane-1,2-diol
23770 000504-63-2 propane-1,3-diol SML = 0.05 mg / kg 23800 000071-23-8
propan-1-ol 23 830 000 067
-63-0 propan-2-ol
23860 000123-38-6 propionaldehyde;
propanaldehyd
23890 000079-09-4 propionic acid
23920 000105-38-4 vinyl propanoate SML (T) = 6 mg / kg (2)
(Expressed as acetaldehyde) 23950 000123-62-6 propionic

23980 000115-07-1 propylene;

24010 000075-56-9 propylene, propylene oxide QM = 1 mg / kg in FP 24051 000120-80-9
pyrocatechol; see 1.2 dihydroxybenzen
benzene-1,2-diol
24057 000089-32-7 pyromellitanhydrid SML = 0,05 mg / kg (expressed as
pyromellitic acid)
24070 073138-82-6 resin acid
rosin acids
24072 000108-46-3 resorcinol see 1,3dihydroxybenzen
24073 000101-90-6 resorcinol (diglycidyl) ether QMA = 0,005 mg / 6 dm2. Substance not
be used in polymers contacting
food prokteré according
Annex No. 4 to tétovyhlášce
determined using simulant D
the substance can only be used for
indirect food contact,
separate PET layer 24100 008050-09-7 Rosin

24130 008050-09-7 rosin see.
24160 008052-10-6 Rosin tall oil rosin
24190 009014-63-5 wood rosin
24250 009006-04-6 rubber, natural
24270 000069-72-7 salicylic acid;
2-hydroxybenzoic acid
24280 000111-20-6 sebacic acid;
dodecanedioic acid
24430 002561-88-8 sebakanhydrid;
decanedioic acid anhydride
24475 001313-82-2 Sodium sulfide

sorbitol 000050-70-4 24490 24520 008001-22-7 soybean oil
24540 009005-25-8 starch, food
24550 000057-11-4 stearic acid;
octadecanoic acid 24610 000100-42-5 styrene

24760 026914-43-2 styrene sulfonic acid SML = 0.05 mg / kg 24820 000110-15-6

succinic acid 24850 000108-30- 5 succinic anhydride
24880 000057-50-1 sucrose
24887 006362-79-4 5-sulfoisophthalic acid SML = 5 mg / kg
monosodium salt
24888 003965-55-7 dimethyl 5-sulphoisoftalové SML = 0.05 mg / kg
acid, monosodium salt
24910 000100-21-0 Terephthalic acid SML = 7.5 mg / kg 24940 000100-20-9
dichloride of terephthalic acid SML (T) = 7.5 mg / kg (expressed as | || terephthalic acid)
24970 000120-61-6 dimethyl terephthalate
25080 001120-36-1 tetradec-1-ene SML = 0.05 mg / kg 25090 000112-60-7
tetraethylene | || 25120 000116-14-3 tetrafluoroethylene SML = 0.05 mg / kg 25150 000109-99-9
tetrahydrofuran SML = 0,6 mg / kg

25180 000102-60-3 N, N, N ', N'-tetrakis (2- hydroxypropyl
)
ethylenediamine
25210 000584-84-9 2,4-toluene diisocyanate QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
25240 000091-08-7 2 6-toluene diisocyanate QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
25270 026747-90-0 2,4-toluene diisocyanate, dimer QM (T) = 1 mg / kg in FP (expressed as NCO
) (26)
25360 - 2,3-epoxypropyl-trialkyl (C5-C15) QM = 1 mg / kg in FP (expressed as epoxy acetate
group, molecular weight = 43
)
25380 - vinyl-trialkyl (C7-C17) acetates QMA = 0.05 mg / dm2 6
(= Vinyl versatate)
25385 000102-70-5 triallylamine In accordance with the specifications
set out in Appendix II to this
Annex.
25420 000108-78-1 2,4,6-triamino-1,3,5-triazine SML = 30 mg / kg
25450 26896-48-0 tricyklodekandimethanol SML = 0.05 mg / kg || | 25510 000112-27-6 triethylene
25600 000077-99-6 1,1,1-trimethylolpropane; SML = 6 mg / kg
2-ethyl-2 (hydroxymethyl) propane
1,3-diol
25840 003290-92-4 2,2-bis (methakryloxymethyl) but-SML = 0.05 mg / kg
yl methacrylate
25900 00110-88-3 trioxane SML = 0,05mg / kg 25910 024800-44-0 tripropylene

25927 027955-94-8 1,1,1-tris (4-hydroxyphenyl ) ethane QM = 0.5 mg / kg in FP. Only for
use polycarbonates

25960 000057-13-6 urea vinyl chloride 26050 000075-01-4 see.
requirements of this Decree 26110 000075-35-4 vinylidene QM = 5 mg / kg in FPnebo
SML = ND
(DL = 0.05 mg / kg)
26140 000075-38-7 vinylidene fluoride SML = 5 mg / kg
26155 001072-63-5 1-vinylimidazole QM = 5 mg / kg in FP || | 26170 003195-78-6 N-vinyl-N-methylacetamide QM = 2 mg / kg in FP 26320 002768-02-7
vinyltrimethoxysilane QM = 5 mg / kg in FP 26360 007732-18-5
water V according to a special legal
regulation, which provides
requirements for drinking water -------------------------------------------
-------------------------------------------------- -


SECTION B

LIST OF MONOMERS AND OTHER STARTING SUBSTANCES
Which can be used
Pending a decision on inclusion in Section A
--------------------------------------- -------------------------------------------------- ------
PM / REF No. CAS No name Restrictions and / or specifications
(1) (2) (3) (4)
----------------------------------- -------------------------------------------------- ----------
11500 000103-11-7 2-ethylhexyl acrylate
13050 00528-44-9 1,2,4-benzene tricarboxylic acid, trimellitic see

acid 14260 000502-44-3 caprolactone;
hexane-6-lactone
15730 00077-73-6 dicyclopentadiene
18370 000592-45-0 hexa-1,4-diene
21370 10595-80-9 2-sulfoethyl methacrylate
21970 00923 -02-4 N-methylol
22210 00098-83-9 alpha-methylstyrene
25540 000528-44-9 trimellitic acid QM (T) = 5 mg / kg in FP 25550 000552-30-7
trimellitic anhydride QM (T) = 5 mg / kg in FP (expressed as trimellitic acid
)
26230 000088-12-0 vinylpyrrolidone
---------------- -------------------------------------------------- -----------------------------




INCOMPLETE LIST OF ADDITIVES WHICH MAY BE USED
For plastics

SECTION A
--------------------------------------------- --------------------------------------------------
PM / REF No. CAS No Name Restrictions and / or specifications
(1) (2) (3) (4)
----------------------------------- -------------------------------------------------- ----------
30000 000064-19-7 acetic acid
30045 000123-86-4 butyl acetate
30080 004180-12-5 acetic cuprous salt SML (T ) = 30 mg / kg (7)
(Expressed jakoměď)
30140 000141-78-6 ethyl acetate
30280 000108-24-7 000067-64-1 30295
acetic anhydride acetone
30370 - acetyloctová acid salts
30400 - acetylated glycerides
30 610 - C2-C24 aliphatic linear
monocarboxylic acid

from natural oils and fats and
mono-, di- and
triglycerides (including
branched fatty acids, as

naturally occur in nature)
30612 - synthetic C2-C24
aliphatic, linear,
monocarboxylic acids and
mono- di- and

30960 triglycerides - fatty esters,
monocarboxylic acids (C6-C22
) polyglycerol
31328 - fatty acids,
from animal or
vegetable fats and

oils 31530 123968-25-2 2,4-di-tert-pentyl-6- [1- (3,5-SML = 5 mg / kg
di-tert-pentyl-2-
hydroxyphenyl) ethyl] phenyl
acrylate
31730 000124-04-9 Adipic acid
33120 - alcohols, aliphatic,
with one OH group,
saturated, linear, primary
(C4-C24)
33350 009005-32-7 alginic acid
33801 - n-alkyl (C10 SML = 30 mg / kg
C13) benzenesulfonic acid
34240 - alkyl esters (C10 SML = 6 mg / kg
C20) sulfonic acids having
phenols
34281 - alkyl sulfate acids (C8-C22
), linear, primary with
even number of carbon atoms
34475 - hydroxide phosphite vápenato-
aluminum hydrate
34480 - aluminum fibers, flakes and
Pills
34560 021645-51-2 aluminum hydroxide
34690 011097-59-9 hydroxide carbonate hořečnato-
aluminum
34720 001344-28-1 alumina
34850 143925-92-2 dialkylminy oxidised QM = only propoužití:
hydrogenated and technically) in polyolefins
in amounts up to 0.1% (wt.)
but not in LDPE which is
intended for contact
foods for which
pursuant to Annex no. 4 to this
Decree provides that the
reduction factor less than 3;
b) in PET in a quantity of 0.25 to
% (Wt.), Which is designed
food contact
except for that
According to Annex no. 4 to this
Decree determined using
simulant D.
34895 000088-68-6 2-aminobenzamide SML = 0.05 mg / kg
Možnopoužít substance is only
PET, whichis designed for
potable water and
beverages.
35120 013560-49-1 thiobis (2-hydroxyethyl
) diester
3-aminocrotonate
35160 06642-31-5 6-amino-1,3-dimethyluracil SML = 5 mg / kg
35170 00141-43-5 2-aminoethanol SML = 0.05 mg / kg. Substance not
be used in polymers
contact with foods for which
According to Annex no. 4 to this
Decree determined using
simulant D substance may be
used only for indirect
contact with food, separated
from food
PET layer 35284 00111-41-1 N- (2-hydroxyethyl) ethane-1,2- SML = 0.05 mg / kg. Substance not
diamine to be used in polymers
contact with foods for which
According to Annex no. 4 to this
Decree determined using
simulant D substance may be
used only for indirect
contact with food, separated
Food from PET layer 35320 007664-41-7 ammonia

35440 012124-97-9 ammonium bromide
35600 001336-21-6 ammonium hydroxide
35840 000506-30-9 arachidonic acid
35845 007771-44-0

arachidonic acid, ascorbic acid 36000 000050-81-7 000137-66-6 36,080
ascorbyl palmitate;
ascorbyl hexadecanoate
36160 010605-09-1 ascorbyl stearate
36840 012007-55-5 Barium tetraborate SML (T) = 1 mg / kg (12)
(Expressed jakobarium) and
SML (T) = 6 mg / kg (23)
(Expressed jakobor) without
zvláštníprávní prejudice
prescription kterýmse down
the drinking water requirements
36880 008012-89-3 beeswax

behenamide 003061-75-4 36960 37040 000112-85-6 behenic acid 37280 001302-78-9 bentonite

37360 000100-52-7 benzaldehyde In accordance with footnote (9)
in Appendix III to this Annex. 37600 000065-85-0

benzoic acid 37680 000136-60-7 butyl benzoate
37840 000093-89-0 ethyl-benzoate
38080 000093-58-3 methyl benzoate
38160 002315-68-6 propyl benzoate
38320 005242-49-9 4- (2-benzoxazolyl) -4 '- (5- in accordance with specifications
methyl 2- listed in Appendix II to this || | benzoxazolyl) stilbene Annex.
38510 136504-96-6 1,2-bis (3- SML = 5 mg / kg
aminopropyl) ethylenediamine,
polymer with N-butyl-2,2,6,6
tetramethyl-4-piperidinamine
and 2,4,6-trichloro-1,3,5
triazine
38515 001533-45-5 4,4'-bis (2- SML = 0.05 mg / kg (1)
benzoxazolyl) stilbene
38810 080693-00-1 3,9-Bis (2,6-di-tert-butyl-4- SML = 5 mg / kg (sum of phosphite and
methylphenoxy) -2,4,8,10- phosphate)
tetraoxa-3,9-
diphosphaspiro [5.5] undecane
(Bis (2,6-di-tert-butyl-4-
methylphenyl) diphosphite pentaerythhhritol-
)
38840 154862-43-8 Bis (2,4-dicumylphenyl) SML = 5 mg / kg (
pentaerythritol as the sum of the substance itself, its oxidised form
bis (2,4-dicumylphenyl)

pentaerythritolfosfátu and product jejíhydrolýzy 2,4
dikumylfenol)
38879 135861-56 -2 bis (3,4
dimethylbenzylidene) sorbitol
38950 079072-96-1 bis (4-
ethylbenzyliden) sorbitol
39200 006200-40-4 bis (2-hydroxyethyl) -2 - SML = 1,8 mg / kg
hydroxypropyl-3-
(Dodecyloxy) methylammonium
chloride
39680 000080-05-7 2,2-bis (4-hydroxyphenyl) propane SML (T) = 0.6 mg / kg (28)
39815 182121-12-6 9,9-Bis ( methoxymethyl) fluorene QMA = 0.05 mg / dm2 6
39890 087826-41-3 bis (methylbenzylidene) sorbitol
069158-41-4
054686-97-4 081541-
12-0
39925 129228-21-3 3,3-bis (methoxymethyl) -2,5 SML = 0.05 mg / kg
dimethylhexane
40120 068951-50-8 bis (polyethylene glycol) hydroxy SML = 0.6 mg / kg
methyl phosphonate;
[(Hydroxymethyl) phosphoryl] bis [
poly (oxyethylene)]
40320 010043-35-3 boric acid SML (T) = 6 mg / kg (23)
(Expressed as Boron) without
prejudice
special legal
regulation laying down
the drinking water requirements
40400 010043-11-5 boron nitride 40,570

40580 000106-97-8 000110-63-4 butane butane-1,4-diol SML (T) = 0,05mg / kg (24)
41040 005743-36-2 calcium butyrate
41120 10043-52-4 calcium chloride
41280 001305-62-0 calcium hydroxide
41520 001305-78-8 calcium oxide | || 41600 012004-14-7 Sulpho calcium

41680 037293-22-4 000076-22-2 camphor in accordance with footnote (9)
Appendix IIItéto Annex.
41760 008006-44-8 candelilla wax
41840 00105-60-2 caprolactam SML (T) = 15 mg / kg (5)
41960 000124-07-2 caprylic acid;
octanoic acid
42160 000124-38-9 carbon dioxide
42320 007492-68-4 cupric carbonate SML (T) = 30 mg / kg (7)
(Expressed as copper)
42500 - carbonic acid salt

42640 009000-11-7 008015-86-9 42,720 carboxymethylcellulose

carnauba wax 42800 009000-71-9 casein
42880 008001-79-4 castor oil
42960 064147-40- 6 castor oil, anhydrous
43200 - castor oil, mono- and
diglycerides

43280 43300 009004-34-6 009004-36-8 cellulose acetate butyrate
43360 068442-85-3 cellulose, regenerated 43440 008001-75-0 ceresin

43515 - choline chlorides QMA = 0,9 mg / dm2 6
coconut fatty acid

oils 44160 000077-92-9 citric acid
44640 000077-93-0 methyl citrate
45195 007787-70-4 CuBr SML (T) = 30 mg / kg (7)
(Expressed as copper)
45200 001335-23-5 iodide SML (T) = 30 mg / kg (7)
(Expressed as copper)
SML (T) = 1 mg / kg (11)
(Expressed as iodine)
45280 - cotton fibers
45450 068610-51-5 reaction product of p-cresol SML = 5 mg / kg
with dicyclopentadiene and
isobutylene;
p-cresol-dicyklopentadie-
isobutylene copolymer
45560 014464-46-1 003724-65-0 cristobalite
45600 crotonic acid; QMA (T) = 0.05 mg / dm2 6
(E) -but-2-enoic acid (33)
45640 005232-99-5 ethyl-3,3-diphenyl-2- SML = 0.05 mg / kg
cyanoacrylate;
ethyl 2-cyano-
3,3-diphenyl-acrylic
45760 000108-91-8 009000-16-2 cyclohexylamine
45920 dammar
45940 000334-48-5 n-decanoic acid
46070 010016-20-3 alpha -Dextrins
46080 007585-39-9 beta-dextrin

46375 46380 061790-53-2 068855-54-9 diatomaceous silica, carbonate anhydrous
Sodium calcined melt
46480 032647-67-9 dibenzylidene sorbitol
46700 - 5,7-di-tert-butyl-3- (3,4- and SML = 5 mg / kg 2
, 3-dimethylphenyl) benzofuran
2 (3H) -one, comprising:
a) 5,7-di-tert-butyl-3- (3,4-dimethylphenyl
) benzofuran
2 (3H) -one (80 to 100 wt.%)
and
b) 5,7-di-tert-butyl-3- (2,3-dimethylphenyl
) benzofuran
2 (3H) -one (0-20 wt.%)
46720 004130-42-1 2,6-di-tert-butyl-4- QMA = 4,8 mg / dm2 6
ethylphenol
46790 004221-80-1 2,4-di-tert-butylphenyl
3,5-di-tert-butyl-4-
hydroxybenzoic acid
46800 067845-93-6 hexadecyl 3,5-di-tert
butyl-4-hydroxybenzoic
acid
46870 003135-18-0 dioctadecyl 3,5-di-tert
butyl 4-
hydroxybenzylphosphonic
acid
46880 065140-91-2 monoethyl- (3,5-di-tert-butyl SML = 6 mg / kg
4-hydroxybenzyl) phosphonate,
calcium
47210 26427-07-6 dibutyl thiocíničitan, in accordance with the specifications
polymer; Appendix II to this Annex.
thiobis (butyltin sulfide)
polymer
47440 000461-58-5 dicyandiamide
47540 27458-90-8 di-tert-dodecyl disulfide SML = 0.05 mg / kg 47680 000111-46-6
bis (2-hydroxyethyl) ether; SML (T) = 30 mg / kg (3)
diethylene
48460 000075-37-6 1,1-difluoroethane
48620 00123-31-9 1,4-dihydroxybenzene SML = 0.6 mg / kg
48720 00611-99-4 4,4 ' -dihydroxybenzofenon SML (T) = 6 mg / kg (15)
49485 134701-20-5 2,4-dimethyl-6- (1 SML = 1 mg / kg
methylpentadecyl) phenol
49540 000067-68-5 000126-58-9 dimethylsulfoxide
51200 dipentaerythritol
51700 147315-50-2 2- (4,6-diphenyl-1,3,5-triazine SML = 0.05 mg / kg )
2-yl) -5- (hexyloxy) phenol
51760 025265-71-8 dipropylene
000110-98-5 016389-88-1 dolomite

52640 52645 10436-08-5 cis-11-eikosenamid

erucamide 000112-84-5 52720 52730 000112-86-7 erucic acid
52800 000064-17-5 ethanol
53270 037205-99-5 009004-57-3 ethylkarboxymethylcelulóza
53280 ethylcellulose
53360 000110-31-6 N, N'-ethylenebis (oleamide) || | 53440 005518-18-3 N, N'-ethylenebis (palmitamide)
53520 000110-30-5 N, N'-ethylenebis (stearamide)

53600 000060-00-4 ethylene
acid
53610 054453-03-1 ethylenediaminetetraacetic SML (T) = 30 mg / kg (7)
acid, copper salt (expressed as copper)
53650 000107-21-1 ethane-1,2-diol SML (T) = 30 mg / kg (3)
(Ethylene glycol)
54005 005136-44-7 ethylene-N-N'-palmitamide
stearamide
54260 009004-58-4 ethylhydroxyethylcellulose
54270 - ethylhydroxymethylcelulóza
54280 - ethylhydroxypropylcelulóza
54300 118337-09-0 2,2'-ethylidene-bis (4,6-di-SML = 6 mg / kg

tert-butyl phenyl) fluorfosfonit
54450 - fats and oils of animal
or plant sources
Food
54,480 - fats and oils of animal
or plant sources
food, hydrogenated
54930 025359-91-5 Formaldehyde-1napthol SML = 0.05 mg / kg
copolymer; poly (1
hydroxynaftylmethan)]
55040 000064-18-6 formic acid 55120 000110-17-8

fumaric acid 55190 029204-02-2 gadoleic
55440 009000-70 -8 gelatin
55,520 - 55,600
glass fibers - glass microspheres
55680 000110-94-1 glutaric acid 55920 000056-81-5

glycerol 56020 099880-64-5 glycerol dibehenate ;
glycerol didokosonoát
56360 - glycerol esters with acid

acetic 56,486 - esters of glycerol
with acids, aliphatic,
saturated, linear, with
even number of carbon atoms
(C14-C18) and with acids,
aliphatic, unsaturated,
linear, with an even number
carbon atoms (C16-C18)
56487 - glycerol esters with acid
butyric
56490 - glycerol esters with acid
erucic
56495 - glycerol esters with acid
12-hydroxystearic
56500 - glycerol esters with acid
lauric
56510 - glycerol esters with acid
linoleic
56520 - glycerol esters
myristic acid
56535 - glycerol esters with acid
nonanoic
56540 - glycerol esters with acid
oil
56550 - glycerol esters with acid
palmitic
56570 - glycerol esters with acid
propionic
56580 - glycerol esters with acid
ricinoleic
56585 - glycerol esters with acetic
stearic
56610 030233-64-8 monobehenate glycerol 56720 026402-23-3 monohexanoát

56800 030899-62-8 Glycerol monolaurate diacetate glycerol 56880 026402-26-6

glycerol monocaprylate 57040 - glycerol ester monooleate
with ascorbic acid
57120 - glycerol monooleate ester
Citric acid
57200 - glycerol ester palmitate

with ascorbic acid 57280 - Glycerol ester palmitate
Citric acid
57600 - ester glycerol monostearate
with ascorbic acid
57680 - ester glycerol monostearate
citric acid
57800 018641-57-1 glycerol tri (dokosanoát)
57920 000620-67-7 triheptanoát glycerol
58300 - glycine, salts
58320 007782-42-5 graphite
58400 009000-30-0 58,480
guar gum, gum arabic 009000-01-5 000111-14-8 58,720

heptanoic acid 59280 000100-97-0 hexamethyletetraamin; SML (T) = 15 mg / kg (22)
1,3,5,7-tetraazaadamantan (expressed as formaldehyde)
59360 000142-62-1 hexanoic acid
59760 019569-21-2 007647-01-0 59990 huntite
hydrochloric acid
60030 012072-90-1 012304-65-3 hydromagnesite
60080 hydrotalcite
60160 000120-47-8 ethyl 4-hydroxybenzoate
60180 004191-73-5 isopropyl 4-hydroxybenzoate
60200 000099- 76-3 methyl 4-hydroxybenzoate
60240 000094-13-3 propyl 4-hydroxybenzoate

60480 003864-99-1 2- (2-hydroxy-3,5-di-tert-SML (T) = 30 mg / kg (19)
butyl-phenyl) -5-
chlorobenzotriazole²

hydroxyethyl 009004-62-0 60560 60880 61120 009032-42-2 009005-27-0 hydroxyethyl methylcellulose

hydroxyethyl starch 61390 037353-59-6 hydroxymethyl
61680 009004-64- 2 hydroxypropyl
61800 009049-76-7 hydroxypropyl starch
61840 000106-14-9 12-hydroxy acid 62140 006303-21-5

hypophosphorous acid 62240 001332-37-2 iron oxide || | 62450 000078-78-4 isopentane
62640 008001-39-6 Japan wax 62720 001332-58-7 kaolin

62800 - kaolin, calcined
62960 000050-21-5 lactic acid || | 63040 000138-22-7 butyl lactate
63280 000143-07-7 lauric acid 63760 008002-43-5 lecithin

63840 000123-76-2 levulinic acid
63920 000557-59- 5 lignoceric
64015 000060-33-3 acid, linoleic acid 64150 028290-79-1

64500 linolenic acid - lysine salt
64640 001309-42-8 magnesium hydroxide
64720 001309- 48-4 magnesia
64800 00110-16-7 maleic acid SML (T) = 30 mg / kg (4) 65020 006915-15-7

malic acid, malonic acid 000141-82-2 65 040 | || 65520 000087-78-5 mannitol
65920 66822-60-4 sodium [N-
methacryloyloxyethyl-N, N-
dimethyl-N-carboxymethyl
ammonium chloride-octadecyl
methacrylate-ethylmethakrylát-
cyclohexyl methacrylate N-
vinyl-2-pyrrolidone,
copolymers
66200 037206-01-2 009004-67-5 66240 methylkarboxymethylcelulóza

methylcellulose 66560 004066-02-8 2,2'-methylene-bis (4-methyl-6- SML (T) = 3 mg / kg (6)
cyclohexylphenol)
66580 000077-62-3 2,2'-methylene-bis [4-methyl-6- SML (T) = 3 mg / kg (6) || | (1-methylcyclohexyl) phenol]
66640 009004-59-5 methyl ethyl
66695 - 66700 009004-65-3 methylhydroxymethylcelulóza

methylhydroxypropylcellulose 66755 002682-20-4 2-methyl-4-isothiazolin- 3-SML = ND
(DL = 0.02 mg / kg, including
measurement uncertainty)
67120 012001-26-2 mica
67180 - blend (50 wt.%) Of n-decyl-n- SML = 5 mg / kg (1)
octyl phthalate, (25 wt.%)
di-a-decyl phthalate and (25%
wt.) of di-n-octyl phthalate
67200 001317-33-5 molybdenum disulfide
67840 - montanic acid and / or
esters
with ethylene glycol and / or
butane-1,3-diol and / or
glycerol
67850 008002-53-7 Montan waxes
67891 000544-63-8 myristic acid
68040 003333-62-8 7- [2H-naphtho (1,2-d) triazol-2-
yl] -3-phenylcoumarin
68078 027253-31-2 neodecanoic acid salt SML (T) = 0,05mg / kg
cobalt; (Expressed as neodecanoic
7,7-dimethyloctanoic acid) and
acid cobalt salt SML (T) = 0,05mg / kg (14)
(Expressed as cobalt)
Not to be used
in polymers intended for
contact with foods for which
According to Annex no. 4 to this
Decree established simulant
D.

68125 037244-96-5 nefelinsyenit
68145 080410-33-9 2,2 ', 2 "- nitrilo [triethyl SML = 5 mg / kg (sum of phosphite and
tri (3,3' , 5,5'-tetra-tert-phosphate)
butyl-1,1'-biphenyl-2,2'
diyl) phosphite]
68960 000301-02-0 oleamide
69040 000112-80-1 oleic acid oleyl
69760 000143-28-2 000144-62-7
69920 oxalic acid SML (T) = 6 mg / kg (29)
70000 070331-94-1 2 , 2'-oxamidobis [ethyl-3- (3,5
di-tert-butyl-4-hydroxyphenyl) -
propionate]
70240 70400 012198-93-5 000057-10-3 ozokerite

palmitic acid and palmitoleic acid 71020 000373-49-9 009000-69-5 pectin

71440 71600 000115- 77-5 pentaerythritol
71635 025151-96-6 2,2-bis (hydroxymethyl) propane-SML = 0.05 mg / kg. should not be

1,3-diol di (octadec-9-enoate) used in polymers contacting
(Pentaerythritol dioleate) with food for which
Annex no. 4k hereto
established
simulant D 71670 178671-58-4 pentaerythritol tetrakis (2- SML = 0.05 mg / kg
cyano-3,3-dimethyl-phenyl acrylate)
71680 006683-19-8 Pentaerythritol tetrakis [3
(3,5-di-tert-butyl-4-
hydroxyphenyl) propionate]
71720 000109-66-0 007664-38-2 72640 pentane
phosphoric acid
73160 - mono- and di-n-alkyl (C16 and SML = 0.05 mg / kg
C18) phosphoric acid esters
73720 000155-96-8 (trichloroethyl) phosphate SML = ND
(DL = 0,02mg / kg including
measurement uncertainty)
74010 145650-60-8 bis (2,4-di-tert-butyl-6- SML = 5 mg / kg (amount of phosphites || | methylphenyl) ethyl phosphite and phosphate)
74240 031570-04-4 tris (2,4-di-tert-butylphenyl) -
phosphite
74480 000088-99-3 o-phthalic acid, phthalic anhydride

76320 000085-44-9 009016-00-6 76721 063148- polydimethylsiloxane (Mw> 6 In accordance with the specifications 62-9
800) set out in Appendix II to this
Annex.
76730 - polydimethylsiloxane A- SML = 6 mg / kg
hydroxypropylated
76866 - polyesters propane-1,2-diol SML = 30 mg / kg
and / or butane-1,3-diol and / or
butane-1,4-diol and / or
polypropylene
adipic acid by
They may be terminated groups
derived from acids
acetic acid or fatty acids
C12-C18 or octane-1-ol
and / or decan-1-ol 025322-68-3 76,960

77600 061788-85-0 polyethylene glycol ester, polyethylene glycol
hydrogenated castor
Oil
77702 - polyethylene glycol esters
aliphatic
monocarboxylic acids
(C6-C22) and their ammonium and
sodium sulfates
77895 068439-49-6 ether of polyethylene glycol (EO SML = 0,05 mg / kg and in accordance
= 2-6) and monoalkyl (C16-C18) with the specifications in Appendix II
this Annex
79040 009005-64-5 sorbitan monolaurate

79120 009005-65-6 polyethylene sorbitan monooleate

79200 009005-66-7 polyethylene glycol sorbitan monopalmitate

79280 009005-67-8 polyethylene glycol sorbitan monostearate

79360 009005-70-3 polyethylene glycol sorbitan trioleate

79440 009005-71-4 polyethylene glycol sorbitan tristearate

80240 029894-35-7 polyethylene glycol castor oil Polyglycerol
80640 - polyoxyalkylene (C2
C4) dimethylpolysiloxane
80720 008017-16-1 PPA
80800 025322-69-4 polypropylene || | 81220 192268-64-7, poly [[6- [N- (2,2,6,6 SML = 5 mg / kg
tetramethylpiperidin-4-yl) -N-
butylamino] -1,3,5-triazine-2,4-
diyl] [N- (2,2,6,6-tetramethylpiperidin-4-

yl) imino] hexane-1,6-diyl [N-
(2,2,6,6-tetramethylpiperidine
4-yl) imino]] - N- [N, N, N ', N'
tetrabutyl-N '- (2,2,6,6-tetramethylpiperidin-4-

ylamino) hexyl] [1,3,5-triazin
2,4,6-triamino] -U-N, N, N ', N'
tetrabutylammonium-1,3,5-triazine-2,4-
diamine
81515 087189-25-1 Polyglycerol
81520 007758-02-3 zinc bromide and potassium
81600 001310-58-3 potassium hydroxide
81760 - powders, flakes and fibers SML (T) = 30 mg / kg (7)
brass, bronze, copper (expressed as copper)
stainless steel, tin and SML = 48mg / kg (expressed as
alloys of copper, iron, tin and iron)
81840 000057-55-6 propane-1,2-diol, propane
81882 000067-63-0 -2-ol
82000 000079-09-4 propionic acid
82080 009005-37-2 1,2-propyleneglycol alginate
82240 022788-19-8 1,2-propyleneglycol dilaurate
82400 000105 -62-4 dioleate 1,2-propyleneglycol dipalmitate
82560 033587-20-1 1,2-


glycol distearate 82720 006182-11-2 1,2-propylene glycol monolaurate
82800 027194-74-7 1,2-
propylene glycol monooleate
82960 001330-80-9 1,2-glycol monopalmitate
83120 029013-28-3 1,2-
propylene glycol monostearate
83300 001323-39-3 1,2-
propylene glycol
83320 - 83325 propylhydroxyethylcelulóza
-
propylhydroxymethylcelulóza 83330 - 83440 002466-09-3 propylhydroxypropylcelulóza

pyrophosphoric acid 83455 013445-56-2 diphosphonic acid 83460 012269-78-2
pyrophyllite
83470 014808-60-7 quartz
83599 68442-12-6 reaction products of 2- SML (T) = 0,18mg / kg (16)
sulfonylethyl oleate (expressed as tin)
with dichloro-dimethylcínem,
sodium sulphide and
trichlormethylcínem
83610 073138-82-6 resin acids and
rosin acids
83840 008050-09-7 008050-31-5 84000
colophony rosin, glycerol ester
84080 008050-26-8 rosin ester
pentaerythritol
84210 065997-06-0 Rosin, hydrogenated
84240 065997-13-9 Rosin, hydrogenated,

ester and glycerol 84320 008050-15-5 Rosin, hydrogenated,
ester with methanol
84400 064365-17-9 Rosin, hydrogenated,
pentaerythritol ester with
84560 009006-04-6 rubber, natural 000069-72-7 84,640

salicylic acid 85360 000109-43-3 dibutyl decanedioate
85601 - natural silicates (excluding
asbestos)
85610 - silicates, natural,
silanized (other than asbestos)
85680 01343-98-2 silicic acid
85840 053320-86-8 lithium silicate soda-SML (T) = 0.6 mg / kg (8)
Magnesium (expressed as lithium)
86000 - silicic acid,
silylated
86160 000409-21-2 silicon carbide
86240 007631-86-9 86,285
silica - silica, silanized
86560 007647-15-6 Sodium Bromide
86720 001310-73 -2 sodium hydroxide
87040 001330-43-4 sodium tetraborate SML (T) = 6 mg / kg (23)
(Expressed jakobor) without
prejudice
special regulation
establishing requirements
Drinking water
87200 000110-44-1 sorbic acid
87280 029116-98-1 sorbitan dioleate
87520 062568-11-0 sorbitan monobehenate
87600 001338-39-2 sorbitan monolaurate
87680 001338-43-8 sorbitan monooleate
87760 026266-57-9 sorbitan monopalmitate
87840 001338-41-6 sorbitan monostearate
87920 061752-68-9 sorbitan tetrastearate || | 88080 026266-58-0 sorbitan trioleate
88160 054140-20-4 sorbitan tripalmitate
88240 026658-19-5 sorbitan tristearate

sorbitol 000050-70-4 88320 88600 026836- 47-5 monostearate sorbitol
88640 008013-07-8 soybean oil, in accordance with the specifications
epoxidized in Appendix II to this Annex.
88800 009005-25-8 starch, food
88880 068412-29-3 Starch, Hydrolyzed

stearamide 88960 89040 000124-26-5 000057-11-4 stearic acid
89200 007617 -31-4 cuprous stearate SML (T) = 30 mg / kg (7)
expressed as copper
89440 - esters of stearic acid SML (T) = 30 mg / kg (3)
with ethylenklykolem
90720 058446-52-9 005793-94-2 stearoylbenzoylmethane
90800 stearoyl-2-lactic acid,
calcium
90960 000110-15-6 succinic acid
91200 000126-13-6 sucrose acetate isobutyrate
91360 000126-14-7 sucrose octaacetate 91840 007704-34-9 sulfur

91920 007664-93-9 sulfuric acid
92030 010124-44-4 copper sulfate SML (T) = 30 mg / kg (7)
expressed as copper

talc 014807-96-6 92080 92150 01401-55-4 acid, tannin, in accordance with the specifications
JECFA
92160 000087-69-4 tartaric acid
92,195 - taurine, salt

92205 057569-40-1 2,2'-methylenebis (4-methyl-6- tert-butylphenol
) diester
terephthalic acid tetraethylene
92350 000112-60-7 000102-60-3 92640
N, N, N ', N'-tetrakis (2-
hydroxypropyl) ethylenediamine
92700 078301-43-6 2,2,4,4-tetramethyl-20 (2,3 SML = 5 mg / kg
epoxypropyl) -7-oxa-3,20
diazadispiro [5.1.11.2] -
heneicosan-21-one, polymer
92930 120218-34-0 thiodiethylenbis (5- SML = 6 mg / kg
methoxycarbonyl-2,6-dimethyl
1,4-dihydropyridine-3- || |
carboxylate 93440 013463-67-7 titanium dioxide
93520 000059-02-9 alpha-tocopherol

93680 010191-41-0 009000-65-1 gum tragacanth
00108- 93720 78-1 2,4,6-triamino-1,3,5-triazine SML = 30 mg / kg 94320 000112-27-6 triethylene

94960 000077-99-6 2-ethyl-2- SML = 6 mg / kg
(hydroxymethyl) propane-1,3- diol

95000 028931-67-1, poly [2,2-
bis (hydroxymethyl) butan-1-ol || | trimethacrylate] -co-methyl methacrylate

95200 001709-70-2 1,3,5-trimethyl-2,4,6
tris (3,5-di-tert-butyl
4- hydroxybenzyl) benzene
95270 161717-32-4 2,4,6-tris (tert-butyl) phenyl-2- SML = 2 mg / kg (as the sum
butyl-2-ethylpropane -1,3-diol- phosphite, phosphate and phosphate hydrolysis product
= TTBP)
95725 110638-71-6 vermiculite reaction product SML (T) = 0.6 mg / kg (8)
with lithium citrate expressed jakolithium
95855 007732-18-5 water In compliance with the special
legislation laying
establishing requirements for drinking
Water
95859 - waxes, refined, derived in accordance with specifications
from petroleum or synthetic listed in Appendix II to this
Annex hydrocarbons
95883 - white mineral oils, in accordance with the specifications
paraffinic derived set out in Appendix II to this
Petroleum hydrocarbon Annex

95905 013983-17-0 Wollastonite 95920 - wood flour and fibers
untreated 95935 011138-66-2

xanthan gum 96190 020427-58-1 Zinc hydroxide
96240 001314-13-2 zinc oxide
96320 001314-98-3 zinc sulfide
- -------------------------------------------------- -------------------------------------------

SECTION B

----------------------------------------------- ------------------------------------------------ || | PM / REF. no. CAS No Name Restrictions and / or specifications
------------------------------------- --------------------------------------------------
-------- 30180 02180-18-9 manganese acetate SML (T) = 0.6 mg / kg (10)
(Expressed as Mn)
31520 61167-58-6 2-tert-butyl-6- (3-tert-butyl-2- SML = 6 mg / kg
hydroxy-5-methylbenzyl) -4- | || methylphenyl acrylate
31920 00103-23-1 bis (2-ethylhexyl) -hexandioát SML = 18 mg / kg (1)
bis (2-ethylhexyl) adipate
34230 - alkyl (C8-C22) sulfonic SML = 6 mg / kg
acid
34650 151841-65-5 hydroxid- SML = 5 mg / kg
bis [2,2'methylbis (4,6-di-tert
butylphenyl) phosphate], aluminum
35760 01309-64-4 antimony trioxide SML = 0.02 mg / kg (expressed as antimony
and
including measurement uncertainty)
36720 17194-00-2 barium hydroxide SML (T) = 1 mg / kg (12)
(Expressed jakobaryum)
36800 10022-31-8 barium nitrate SML (T) = 1 mg / kg (12)
(Expressed jakobaryum)
38240 00119-61-9 benzophenone SML = 0.6 mg / kg
38560 07128-64-5 2,5-bis (5-tert-butyl-2- SML = 0.6 mg / kg
benzoxazolyl) thiophene
38700 63397-60-4 bis (2-karbobutoxyethyl) activity SML = 18 mg / kg
bis (isooktylsulfanylacetát)
38000 000553-54-8 lithium benzoate SML (T) = 0,6mg / kg (8)
(Expressed as lithium)
38800 32637-78-8 N, N'-bis (3- (3,5-di-tert-butyl SML = 15 mg / kg

4- hydroxyphenyl) propionyl) hydrazide

38820 26741-53-7 bis (2,4-di-tert-butylphenyl) SML = 0.6 mg / kg
pentaerythritol
39060 35958-30-6 1,1-bis (2-hydroxy-3,5-di-tert-SML = 5 mg / kg
butylphenyl) ethane
39 090 - N, N-bis (2- SML (T) = 1.2 mg / kg (13)
hydroxyethyl) alkyl (C8-C18) amine
39120 - N, N-bis (2- SML (T) = 1,2mg / kg (13)
hydroxyethyl) alkyl (C8-C18) (expressed as N, N-bis (2-
amine hydrochloride hydroxyethyl) alkyl (C8-C18
) amino)
00991- 40000 84-4 2,4-bis (oktylsulfanyl) -6- (4- SML = 30 mg / kg
hydroxy-3,5-di-tert
aniline) -1,3,5-triazine | || 40020 110553-27-0 2,4-bis (octylthiomethyl) -6- SML = 6 mg / kg
methylphenol
40160 61269-61-2 N, N'-bis (2,2,6,6 SML = 2.4 mg / kg

tetramethylpiperidine-4-yl) hexamethylene-1,2 -
dibromoethane, copolymer
40720 025013-16-5 2-tert-butyl-4-methoxyphenol; SML = 30 mg / kg
tert-butyl-4-hydroxyanisole (BHA =
)
40800 13003-12-8 4,4'-butylidenbis (6-tert-butyl SML = 6 mg / kg
3-methylfenylditridecylfosfit) | || 40980 19664-95-0 butanoic acid manganese salt SML (T) = 0.6 mg / kg (10)
(Expressed jakomangan)
42000 63438-80-2 (2-karbobutoxyethyl) activities SML = 30 mg / kg
tris (isooktylsulfanylacetát)
42400 10377-37-4 lithium carbonate SML (T) = 0.6 mg / kg (8)
(Expressed jakolithium)
42480 00584-09-8 rubidium carbonate SML = 12 mg / kg
43600 04080-31-3 1- (3-chloroallyl) -3,5,7-triaza SML = 0, 3 mg / kg
1-azoniaadamantanchlorid
43680 00075-45-6 chlorodifluoromethane SML = 6 mg / KGV accordance with
specifications laid down
Appendix II to this Annex.
44960 11104-61-3 cobalt oxide SML (T) = 0,05mg / kg (14)
(Expressed jakokobalt)
45440 - stryenované butylated cresols SML = 12 mg / kg
46640 000128-37-0 2,6-di-tert-butyl-4- SML = 3 mg / kg
methylphenol;
(= BHT)
47600 84030-61-5 di-n- SML = 12 mg / kg
dodecylcínbis (isooktylsulfanyl
acetate)
48640 00131-56-6 2,4-dihydroxybenzophenone SML (T) = 6 mg / kg (15)
48800 00097-23-4 2,2'-dihydroxy- 5,5 SML = 12 mg / kg
dichlorodiphenylmethane
48880 00131-53-3 2,2-dihydroxy-4- SML (T) = 6 mg / kg (15)
methoxybenzophenone
49600 26636-01-1 dimethylcínbis (isooktylsulfan SML (T) = 0.18 mg / kg (16)
ylacetate) (expressed as tin)
49840 02500-88-1 dioctadecyl disulfide SML = 3 mg / kg
50160 - di-n-oktylcínbis (n-alkyl (C10 SML (T) = 0,04mg / kg (17)
C16) methylthioacetate) (expressed as tin)
50240 10039-33-5 di-n-oktylcínbis (2- SML (T) = 0,04mg / kg (17)
ethylhexylmaleinát) (expressed as tin)
50320 15571-58-1 di-n- oktylcínbis (2-ethylhexyl SML (T) = 0,04mg / kg (17)
methylthioacetate) (expressed as tin)
50360 - di-n- SML (T) = 0,04mg / kg (17 )
oktylcínbis (ethylmaleinát) (expressed as tin)
50400 33568-99-9 di-n-oktylcínbis (isooctyl- SML (T) = 0,04mg / kg (17)
maleate) (expressed as tin) | || 50480 26401-97-8 di-n- SML (T) = 0,04mg / kg (17)
oktylcínbis (isooktylsulfanylac (expressed as tin)
état)
50560 - di-n-oktylcínbutan1,4-diol- SML (T) = 0.04 mg / kg (17)
bis (expressed as tin)
(Methylthioacetate)
50640 03648-18-8 di-n-oktylcíndidodekanoát SML (T) = 0,04mg / kg (17)
di-n-octyltin dilaurate (expressed as tin)
50720 15571-60-5 di-n-oktylcíndimaleinát SML (T) = 0,04mg / kg (17)
(Expressed jakocín)
50800 - di-n-oktylcíndimaleinát SML (T) = 0,04mg / kg (17)
esterified (expressed as tin)
50880 - di-n-oktylcíndimaleinát SML (T) = 0,04mg / kg (17)
polymers (n = 2-4) (expressed as tin)
50960 69226-44-4 di-n- SML (T) = 0,04mg / kg (17)

oktylcínethylenglykolbis (sulfate (calculated as tin)
nylacetát)
51040 15535-79-2 di-n-oktylcínsulfanylacetát SML (T) = 0,04mg / kg (17)
(Expressed jakocín)
51120 - di-n-oktylcínthiobenzoát [(2- SML (T) = 0,04mg / kg (17)
ethylhexyl) methylthioacetate] (expressed as tin)
51570 00127-63 -9 diphenylsulfone SML = 3 mg / kg (25)
51680 00102-08-9 N, N'-diphenylthiourea SML = 3 mg / kg
52000 27176-87-0 dodecylbenzene SML = 30 mg / kg | || acid
52320 52047-59-3 2- (4-dodecylphenyl) indole SML = 0.06 mg / kg
52880 23676-09-7 ethyl 4-ethoxybenzoate SML = 3.6 mg / kg 53 200
23949-66-8 2-ethoxy-2'-ethyloxanilide SML = 30 mg / kg 54880 000050-00-0
formaldehyde SML (T) = 15 mg / kg (22)
55200 001166-52-5 dodecyl-3,4,5- SML (T) = 30 mg / kg (34)
trihydroxybenzoate;
dodechl gallate
55280 001034-01-1 octyl-3,4,5-trihydroxybenzoate; SML (T) = 30 mg / kg (34)
octyl gallate
55360 000121-79-9 propyl-3,4,5- SML (T) = 30 mg / kg (34)
trihydroxybenzoate;
propyl gallate
58960 00057-09-0 hexadecyl SML = 6 mg / kg
59120 23128-74-7 1,6-bis [3- (3,5-di-tert-butyl-4- SML = 45 mg / kg
hydroxyphenyl) propanamide] cyclohexane
59200 35074-77-2 1,6-bis [3- (3,5-di-tert-butyl-4- SML = 6 mg / kg | || hydroxyphenyl) propanoate] cyclohexane
60320 70321-86-7 2- (2-hydroxy-3,5-bis (1,1-SML = 1.5 mg / kg
dimethylbenzyl) phenyl) benzotriazole | || 60400 03896-11-5 2- (2'-hydroxy-3'-tert-butyl-5'- SML (T) = 30 mg / kg (19)
methylphenyl) -5-
chlorobenzotriazole
60800 65447-77-0 dimethylethyl [1- (2- SML = 30 mg / kg
hydroxyethyl) -4-hydroxy
2,2,6,6-tetramethylpiperidine] -
succinate copolymer
61280 03293-97-8 2-hydroxy-4-n- SML (T) = 6 mg / kg (15)
hexyloxybenzofenon
61360 00131-57-7 2-hydroxy-4-methoxybenzophenone SML (T) = 6 mg / kg (15)
61440 02440-22-4 2- (2-hydroxy-5- SML (T ) = 30 mg / kg (19)
methylphenyl) benzotriazole
61600 01843-05-6 2-hydroxy-4-n- SML (T) = 6 mg / kg (19)
oktyloxybenzofenon
63200 51877-53-3 manganese salt, lactic acid SML (T) = 0.6 mg / kg (10)
of manganese-dilaktát (expressed as Mn)
64320 10377-51-2 lithium iodide SML (T) = 1 mg / kg (11)
(Expressed as iodine) and SML (T)
= 0.6 mg / kg (8) (expressed as lithium
)
65120 07773-01-5 manganese chloride SML (T) = 0.6 mg / kg (10)
(Expressed jakomangan)
65200 12626-88-9 manganese hydroxide SML (T) = 0.6 mg / kg (10)
(Expressed jakomangan)
65280 10043-84-2 Manganese hypophosphite SML (T) = 0.6 mg / kg (10)
(Expressed jakomangan)
65360 11129-60-5 manganese oxide SML (T) = 0.6 mg / kg (10)
(Expressed jakomangan)
65440 - manganese pyrophosphate SML (T) = 0.6 mg / kg (10)
(Expressed jakomangan)
66360 85209-91-2 2,2'-methylenebis (4,6-di-tert-SML = 5 mg / kg
butylphenyl) sodium phosphate
66400 00088-24-4 2 , 2'-methylenebis (4-ethyl-6- SML (T) = 1.5 mg / kg (20)
tert-butylphenol)
66480 00119-47-1 2,2'-methylenebis (4 -methyl-6- SML (T) = 1.5 mg / kg (20)
tert-butylphenol)
67360 67649-65-4 mono-N- SML = 24 mg / kg
dodecylcíntris (isooktylsulfan
ylacetate)
67520 54849-38-6 monomethylcíntris (isooctyl- SML (T) = 0.18 mg / kg (16)
methylthioacetate) (expressed as tin)
67600 - mono-n-oktylcíntris (alkyl (C10 SML (T) = 1.2 mg / kg (18)
C16) -sulfanylacetát) (expressed as tin)
67680 27107-89-7 mono-N- oktylcíntris (2- SML (T) = 1.2 mg / kg (18)
ethylhexylsulfanylacetát) (expressed as tin)
67760 26401-86-5 mono n-oktylcíntris (isooctyl- SML (T) = 1.2 mg / kg (18)
methylthioacetate) (expressed as tin)
67896 020336-96-3 lithium-tetradecanoate; SML (T) = 0.6 mg / kg (8)
lithium myristate (expressed as lithium)

68320 02082-79-3 oktadecyl3- (3,5-di-tert-butyl SML = 6 mg / kg
4-hydroxyphenyl) propanoate
68400 10094-45-8 octadecyl (Z) -dokos-9-enamide SML = 5 mg / kg
oktadecylerukamid
68860 004724-48-5 n oktylfosfoniová acid SML = 0.05 mg / kg
69840 16260-09-6 N- (Z) -octadec-9-en-1 SML = 5 mg / kg
ylhexadekanamid
oleylpalmitamid
71935 007601-89-0 sodium perchlorate monohydrate SML = 0.05 mg / kg (31)
72160 00948-65-2 2-phenylindole SML = 15 mg / kg
72800 01241-94 -7 diphenyl-2-ethylhexyl SML = 2.4 mg / kg
73040 13763-32-1 phosphoric acid, lithium SML (T) = 0.6 mg / kg (8)
salt (expressed as lithium)
73120 10124-54-6 phosphoric acid, salts SML (T) = 0.6 mg / kg (10)
manganese (expressed as Mn)
74400 - tris (nonylphenyl) ester SML = 30 mg / kg
phosphorous
or
tris (dinonylphenyl) ester
phosphorous acid
tris (nonyl and / or
dinonylphenyl) phosphite
76680 068132-00-3 polycyklopentadien SML = 5 mg / kg (1)
hydrogenated
77440 - polyethylene glycol di (12hydrox SML = 42 mg / kg
yoktadec9enoát)
polyethylenglykoldiricinoleát
77520 61791-12-6 polyethylene glycol ester SML = 42 mg / kg
castor oil
78320 09004-97-1 polyethylenglykol12hydroxyok SML = 42 mg / kg
tadec9enoát
polyethylene glycol
monoricinoleate
81200 71878-19-8 poly (6 - [(1,1,3,3 SML = 3 mg / kg
tetramethylbutyl) amino] -1,3,5- triazin-2
, 4-diyl] - [(2,2,6,6-tetramethylpiperidine-4-

yl) imino] hexamethylene [(2,2,6,6
tetramethylpiperidine-4-yl) imino]
81680 07681-11-0 potassium iodide SML (T) = 1 mg / kg (11)
(expressed as iodine)
82020 19019-51-3 propanoic acid, salt SML (T) = 0.05 mg / kg (14)
cobalt (calculated as cobalt)
83595 119345-01-6 reaction product of di-tert-SML = 18 mg / kg in accordance with
butylfosfonitu with biphenyl specifikacemiuvedenými
obtained by condensation of 2,4-di-tert out in Appendix II to this Annex.
butvlphenol products
Friedel-Craft reaction of phosphorus trichloride and


biphenyl 83700 00141-22- 0 (Z) -12-hydroxyoktadec-9-enoic SML = 42 mg / kg

acid, ricinoleic acid
84800 00087-18-3 4-tert-butylphenyl salicylate SML = 1.2 mg / kg
84880 00119-36-8 methyl salicylate SML = 30 mg / kg
85760 12068-40-5 lithium aluminum silicate SML (T) = 0.6 mg / kg (8)
(expressed as lithium)
85920 12627-14-4 lithium silicate SML (T) = 0.6 mg / kg (8)
(Expressed jakolithium)
86480 007631-90-5 sodium bisulfite SML (T) = 10 mg / kg (30)
(Expressed jakoSO2)
86800 07681-82-5 sodium iodide SML (T) = 1 mg / kg (11)
(Expressed jakojod)
86880 - natriummonoalkyl- SML = 9 mg / kg
dialkylfenoxybenzendisulfonát
86920 007632-00-0 sodium nitrite SML = 0.6 mg / kg
86960 007757-83-7 sodium sulfite SML (T) = 10 mg / kg (30)
(Expressed jakoSO2)
87120 007772-98-7 sodium thiosulfate SML (T) = 10 mg / kg (30)
(Expressed jakoSO2)
89170 13586-84-0 octadecanoic acid SML (T) = 0.05 mg / kg (14)
cobaltous salt (expressed as cobalt)
stearic acid, cobalt
salt
92000 07727-43-7 barium sulfate SML (T) = 1 mg / kg (12)
(Expressed jakobaryum)
92320 - tetradecylpolyethylenglykol SML = 15 mg / kg
(EO = 3-8) ether glycol
acid
92560 38613-77-3 tetrakis (2,4-di-tert-SML = 18 mg / kg
butylphenyl) 4,4'-biphenyl
ylendiifosfonit
92800 00096-69-5 4,4'-thiobis (6-tert-butyl-3- SML = 0.48 mg / kg
methylphenol)
92880 41484-35-9 thiodiethanolbis (3 - (3,5-di-SML = 2.4 mg / kg

tert-butyl 4-
hydroxyphenyl) propanoate)
93120 00123-28-4 didodecylthiodipropanoát SML (T) = 5 mg / kg (21)
93280 00693-36-7 dioctadecyl thiodipropanoát SML (T) = 5 mg / kg (21)
94400 036443-68-2 triethylene glycol bis [3- (3-tert-SML = 9 mg / kg
butyl-4-hydroxy-5-
methylphenyl) propanoate]
94560 00122-20-3 triisopropanolamine SML = 5 mg / kg
95280 40601-76-1 1,3,5-tris (4-tert-butyl-3- SML = 6 mg / kg
hydroxy-2,6-dimethylbenzyl) -
1,3,5-triazine-2,4,6 (1H, 3H, 5H) -
trione
95360 27676-62-6 1,3,5-tris (3,5-di-tert-butyl-4- SML = 5 mg / kg
hydroxybenzyl) -1,1,3,5- triazine
2,4,6 (1H, 3H, 5H) -trione
95600 01843-03-4 1,1,3-tris (2-methyl-4-hydroxy-SML = 5 mg / kg 5
-tert-butylphenyl) butane
----------------------------------------- -------------------------------------------------- ----

APPENDIX I

PRODUCTS OBTAINED bacterial fermentation -------------------------------------------
-------------------------------------------------- -
PM / Ref. NO. CAS No Name Restrictions and / or specifications
(1) (2) (3) (4)
----------------------------------- -------------------------------------------------- ----------
18888 080181-31-33-hydroxybutyric acid and 3 in accordance with the specifications
pentanoic acid ethyl ester, set out in this dodatkuII
copolymer Annex
--------------------------------------------- --------------------------------------------------

APPENDIX II

SPECIFICATIONS

Part A: General specifications
Materials and products made using aromatic isocyanates or colorants
prepared diazokopulací
not release primary aromatic amines (expressed as aniline) in
determinable quantity (DL = 0, 02 mg / kg food or food simulant
, including analytical tolerance).
Migration value of the primary aromatic amines listed in this Annex
with this limitation may not apply.

----------------------------------------------- ------------------------------------------------ || | Part B: Other specifications
----------------------------------------- -------------------------------------------------- ----
PM / Ref. No Other specifications
-------------------------------------------- -------------------------------------------------- -
11530 (2-hydroxypropane-1-yl) acrylate
May contain up to 25% (wt.) Of 2-hydroxyisopropyl acrylate
(CAS No. 002918-23-2)

16690 divinylbenzene
It may contain up to 45% of ethyl (vinyl) benzene.
18888 3-Hydroxybutanoic acid 3-hydroxypentanoic acid copolymer
Definition The copolymers are produced by controlled fermentacís bacteria
Alcaligenes eutrophus using mixtures of glucose and acid
propanoic acid as carbon sources. Organismusnesmí be used
produced by genetic modification and must pocházetz one
naturally occurring Alcaligenes eutrophus strain
H16 NCIMB 10,442th stock culture of the organism is kept
in freeze-dried ampoules. Submaster / working
was prepared from a stock culture stored in liquid
nitrogen and used for preparation of inoculum for fermentation.
Samples from the fermenter are daily viewed under a microscope
for any changes in colonial morphology on a variety
agars at different temperatures. Copolymers
isolated from heat-treated bacteria by controlled digestion
other cellular components, washing and drying. these
copolymers are normally offered as molded or
reshaped by melting granules containing přísadyjako are
nucleating agents, plasticizers, fillers, stabilizers and
pigments that meet the general and individual
specifications.
- Chemical Poly (3Dhydroxybutanoátco3Dhydroxypentanoát)
name
- CAS 80181-31-3
- Structural
formula: wherein n / (m + n) is greater than 0 and less than or rovno0,25
- Average of at least 150,000 (determined by gel permeation chromatography molecular
).
weight
- The content of less than 98%

poly (3Dhydroxybutanoátco3Dhydroxypentanoát)
analyzed after hydrolysis as a mixture of acid
3Dhydroxybutanové acid 3Dhydroxypentanové.
Description After isolation, white to off-white powder.
properties
- Identification
test:
- Solubility Soluble in chlorinated hydrocarbons such jechloroform
or dichloromethane but practically insoluble in ethanol,
aliphatic alkanes and water.
- Restriction QMA for but2enovou acid (crotonic acid) must
exceed 0.05 mg / 6dm2.
- Purity Prior to granulation the starting material (práškovýkopolymer)
include:
- Nitrogen Not more than 2500 mg / kg of plastic
- Zinc Not more than 100 mg / kg of plastic
- Copper Not more than 5 mg / kg of plastic
- Lead more than 2 mg / kg of plastic
- Arsenic Not more than 1 mg / kg of plastic
- Chromium Not more than 1 mg / kg of plastic
23,547 polydimethylsiloxane (Mw> 6800)
The minimum viscosity of 100 × 106 m2 * s1 (= 100 centistokes) at 25 ° C 25385 triallylamine

40 mg / kg of hydrogel at a ratio of 1 kg of food per maximálně1,5 grams
hydrogel. Use only in hydrogels intended for non-contact
with food.
38 320 4 (2-benzoxazolyl) -4 '(5metylbenzoxazolyl) stilbene
More than 0.05% (m / m) (amount of substance / composition)

43680 chlorodifluorométhane Chlorodifluoromethane content less than 1 mg per kg of substance
47210 dibutylthiocíničitá acid polymer
- Molecular unit = (C8H18S3Sn2) and (n = 1.5 - 2)
76721 polydimethylsiloxane (Mw> 6800)
The minimum viscosity of 100 × 106 m2 * s1 (= 100 centistokes) at 25 ° C
77,895 alkyl (C16 - C18) ethers, poly (ethylene glycol) (n = 2-6)
Composition of the mixture:
The first alkyl (C16 - C18) ethers, poly (ethylene glycol) (n = 2-6) (approximately 28%
wt.)
Second fatty alcohols (C16 - C18) (about 48 wt.%)
3rd alkyl (C16 - C18) ethers of ethylene glycol) (about 24 wt.%) "
83595 Reaction products of di-tert-butylfosfonitu with biphenyl obtained by condensing 2,4-
di-tert-butylphenol with products of Friedel-Crafts chloride
Phosphorous biphenyl

composition
- 4,4'-bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
(CAS 38613-77-3) (36 - 46% by weight (*)
- 4,3'-bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
(CAS 118421-00-4) (17 - 23% wt.)
- 3,3'-bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
( CAS number 118421-01-5) (1-5 wt.%)
- 4 -bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
(CAS 91362 -37-7) (17-19% wt.)
- tris (2,4-di-tert-butylphenyl) phosphonite
(CAS 31570-04-4) (9-18 wt.%)
- 4,4'-bifenylenbis {[0,0-bis (2,4-di-tert-butylphenyl) phosphonite] [
0,0- bis (2,4-di-tert-butylphenyl) phosphonite]}
(CAS 112949-97-0) (<5 wt.%)
Other specification:
- phosphorus content of at least 5.4 to 5.9%
- acid number of not more than 10 mg of KOH per gram
- melting range: 85-110 ° C
88640 soyabean oil, epoxidised
Oxirane <8%, iodine number <6
95859 Waxes, refined, derived from petroleum or from
synthetic hydrocarbon product should have the following specifications:
- Content of mineral hydrocarbons with carbon number less than 25, not more than 5%
(M / m)
- Viscosity of at least 11 × 106 m2 * s1 (= 11 centistokes) at 100 ° C.
- Average molecular weight of at least 500.
95883 White mineral oils, paraffinic, derived from petroleum or synthetic
hydrocarbons
The product should meet the following specifications:
- Content of mineral hydrocarbons with carbon number less than 25: not more than 5%
(M / m)
- Viscosity of at least 8.5 x 106 m2 * s1 (= 8,5 centistokes) at 100 ° C.
- Average molecular weight of at least 480
Note:
(*) The amount of the substance / mixture amount
APPENDIX III


NOTES RELATING TO THE COLUMN "RESTRICTIONS AND / OR SPECIFICATIONS"

(1) Warning: there is a risk SML could be exceeded in fatty food simulants

(2) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 10060 and 23920.


(3) SML (T) in this specific case means that the restriction shall not be

Exceeded by the sum of specific migration of the substances listed under numbers PM / REF
15760, 16990, 47680, 53650, 89,440th

(4) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
19540, 19960 and 64800.

(5) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
14200, 14230 and 41,840th

(6) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 66560 and 66580.


(7) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
30080, 42320, 45195, 45200, 53610, 81760, 89200 , the 92,030th

(8) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
38000, 42400, 64320, 73040, 85760, 85840, 85920 and 95,725th

(9) Warning: there is a risk that the migration of the substance deteriorates the organoleptic characteristics of the food
with which it is in contact, and consequently
final product does not comply with Article 2, second indent of Directive 89/109 / EEC.

(10) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
30180, 40980, 63200, 65120, 65200, 65280, 65360 , 65440 and 73,120th

(11) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
45200, 64320, 81680 and 86,800th

(12) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
36720, 36800, 36840 and 92,000th

(13) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 39090 and 39,120th


(14) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
44960, 68078, 82020 and 89,170th

(15) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
15970, 48640, 48720, 48880, 61280, 61360 and 61600 .

(16) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
49600, 67520 and 83,599th

(17) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
50160, 50240, 50320, 50360, 50400, 50480, 50560 , 50640, 50720, 50800,
50880, 50960, 51040 and 51,120th

(18) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
67600, 67680 and 67,760th

(19) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
60400, 60480 and 61,440th

(20) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 66400 and 66,480th


(21) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 93120 and 93,280th


(22) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
17260, 18670, 54880 and 59,280th

(23) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
13620, 36840, 40320 and 87,040th

(24) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 13720 and 40,580th


(25) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 16650 and 51,570th


(26) QMA (T) in this specific case means that the restriction shall not be exceeded by the sum
residual quantities of the substances listed under numbers PM / REF
14950, 15700, 16240, 16570, 16600, 16630, 18640 , 19110, 22332, 22420,

22570, 25210, 25240 and 25,270th

(27) QMA (T) in this specific case means that the restriction shall not be exceeded by the sum
residual quantities of the substances listed under numbers PM / REF
10599 / 90A, 10599/91, 10599 / 92A and 10599 / 93rd

(28) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 13480 and 39680.


(29) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 22775 and 69920.


(30) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
86480, 86960 and 87,120th

(31) The rules on migration testing, where it is assumed contact with
fats must always be the verification of compliance with the requirements simulant D
as food simulant saturated fats.

(32) The rules on migration testing, where it is assumed contact with
fats must always be the verification of compliance with the requirements
used as a replacement food simulant D iso-octane.

(33) QMA (T) in this specific case means that the restriction shall not be exceeded by the sum
residual quantities of the substances listed under numbers PM / REF 14800 and 45,600th


(34) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
55200, 55280 and 55,360th

(35) Materials and items whose production has been used this substance
(PM / REF č.36640), which were brought into contact with food before 2
August 2005, can also be put into circulation unless the labeling of food
packed into them to indicate the date of the performance. The date of filling may be replaced by another indication
by which it is possible to determine the date of the performance. ".

12th In Annex no. 13, Part II. Surface-modified cellophane
Item 1. Polymers sentence "aggregate quantity of substances not on the side coming into contact with food
exceed 50 mg.kg-1 finishes" is deleted.

13th In Annex no. 13, Part II. Surface-modified cellophane point 1.3 and 1.3.1
subsections 1 March 12 to be deleted.

14th In Annex no. 13, Part II. Surface-modified cellophane text under the heading
Item 2. Resin added: "The total quantity of substances may not exceed 12,5
mg.dm-2 sedimentary layers of film on the side in contact with
food, not only for the preparation of regenerated cellulose films with coating based on cellulose nitrate
".

15th In Annex no. 13, Part II. Surface-modified cellophane section 3, subsection 3.6
plasticizers added: '3.6 2-ethylhexyl diphenyl phosphate
(synonym: 2-ethyl-hexyl diphenyl-fostátu), a maximum of 2.4 mg.kg-1 || | food that is in contact with this type of film, or 0.4 mg.dm-2
coating on the side which is intended for contact with food
. ".

16th In Annex no. 13, Part II. Surface-modified cellophane section 3
Emollients 3.11 point deleted.

17th In Annex no. 13 in Part II. Surface-modified cellophane item 5.
solvents are subsections 5.15, 5.16, 5.17 and 5.18 are deleted.

18th Annex no. 15 is deleted.
Article II

Efficiency


This Decree shall take effect on the date of its publication.
Minister
:

MD. Rath vr

Related Laws