To Change The Code. About Regulation. Requirements For Products In Contact With Foodstuffs

Original Language Title: změna vyhl. o hygien.požadavcích na výrobky ve styku s potravinami

Read the untranslated law here: https://www.global-regulation.com/law/czech-republic/516426/zmna-vyhl.-o-hygien.poadavcch-na-vrobky-ve-styku-s-potravinami.html

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Get a Day Pass for only USD$49.99.
186/2003 Coll.



The DECREE



of 9 June. June 2003,



amending Decree No. 38/2001 Coll. on hygienic requirements for

products intended to come into contact with foodstuffs and dishes



The Ministry of health provides under section 108, paragraph. 1 of law No.

258/2000 Coll., on the protection of public health and amendment to certain

related laws, (hereinafter referred to as "the Act") for the implementation of section 26, paragraph. 1 (a).

b) and d) (a). 2 and 3 of the Act:



Article. (I)



Decree No. 38/2001 Coll. on hygienic requirements for products intended for

to come into contact with foodstuffs and dishes, is hereby amended as follows:



1. In section 2, paragraph 5, the word "beverage", the words "and liquid foods

consistency ".



2. In article 2, point 19 shall be deleted.



Items 20 to 29 shall be renumbered as paragraphs 19 to 28.



3. In section 2, the following shall be added after point 28, paragraphs 29 to 31, as follows:



"29. plastics, organic macromolecular compounds obtained by polymerization,

polycondensation, polyaddition or any other similar process from molecules with

lower molecular weight or by chemical alteration of natural

macromolecules. To such macromolecular compounds can be added

other substances or materials referred to in annex 3 to this Decree, and

under the conditions of this order,



30. the addition of a polymer substance that is physically in polymers

dispergována without significantly influenced the structure of the polymer, and is

added due to the influence of the processing properties of or for the purpose of

modification of utility properties of the polymer,



31. good manufacturing practice, established and maintained by a set of measures, which

ensures the management of the production processes and reproducible quality of the products with the

the required properties. ".



4. In section 3, paragraph 3. 1, after the word "produced", the words "in accordance with the

the principles of good manufacturing practice ".



5. In section 3, paragraph 3. 1, after the word "health" shall be inserted after the words "or

bring about an unacceptable change in the composition of the foodstuffs or affect the

the organoleptic properties of foods "are replaced by the words" cause

about an unacceptable change in the composition of the foodstuffs, and affect the organoleptic

the properties of the food. "



6. In section 3, the following shall be added in paragraph 5 paragraph 6 and 7 are added:



"(6) Materials and articles of plastics, varnishes, paints and products

bearing surface treatment, as well as adhesives that contain, or are

made from one or more of the following substances



2.2-bis) [4-(2,3-epoxypropoxy) phenyl] propane and some of its derivatives,



(b)) bis (2,3-epoxypropyl) ethers of bis (hydroxyphenyl) methane and some of their

derivatives,



(c))-novolac glycidylethery and some of their derivatives



must comply with the hygiene requirements laid down in annex 15 to this

the Decree.



(7) the requirements referred to in paragraph 6 shall not apply to containers and

storage tanks having a capacity greater than 10 000 litres, as well as on their

pipes and pipe associated with them, which is a modified vysocezátěžovým

("heavy duty") coated. ".



7. In section 8 (2). 3 (b). and at the end of section), 1 the word "or" is deleted.



8. section 9, including the title:



"section 9



The elements of the proposal on the opening of the proceedings on the admissibility of the substance



Proceedings under section 26(3). 3 of the Act shall contain the



and the chemical name of the substance) proposed, its synonyms, trade name,

CAS number, chemical composition, structural formula and clean data

the proposed substances



(b) the proposed concentration) data on the substance in the material or product and

justification the technical need for its use,



(c) data on the degradation products) resulting from the proposed substances in

the production, processing, or ageing material or emerging as

the products of the interactions in these processes,



(d) placing the presumed mode of use) and the characteristics of the

product manufactured for the use of the proposed substance



e) data on the toxicity of the proposed substance



(f) information on migration-specific) proposed the substance from the product

the composition of the product to be tested and the test conditions modelujících intended

the use,



(g)) the method of determining the proposed substances, where the method of determining

its impurities, the products and the disintegration of the interactions,



h) available foreign documentation about whether the proposed substance was

allowed in other States, if such exists. ".



9. In section 10, paragraph 1 shall be deleted.



Paragraphs 2 and 3 shall become paragraphs 1 and 2.



10. In section 10, paragraph 1. 1 at the end of paragraph (e) shall be replaced by a comma and dot)

the following point (f)), which read:



"f) Silicones.".



11. In section 11 on the end of the text, the words "and the specifications".



12. In article 11 the present text becomes paragraph 1 and the following

paragraphs 2 and 3 shall be added:



"(2) the general specifications related to plastic products and their materials

are set out in Appendix II to the annex No. 3. Other specifications

concerning certain substances listed in positive lists of annex

No 3 set out in Appendix II, part B of this annex.



(3) the lists of substances in annex No 3 do not include monomers and other starting

the substance is used only for the production of



and surface treatment of resins) or polymers in liquid, powder or

dispersed form, such as varnishes, lacquers and paints,



(b)), epoxy resins,



c) adhesives and coatings improve adhesion,



d) inks. ".



13. In section 13 shall be added after paragraph 7, paragraphs 8 and 9 are added:



"(8) the verification of compliance with the specific migration limits can be done by setting

the quantity of the substance in the finished material or article provided that

the relationship between the quantity and the value of the specific migration of the substance was

set contain sufficient experiments, or for the use of generally accepted

diffusion models based on scientific evidence. To demonstrate the differences

material or product it is necessary to confirm the set value migration

the experimental testing.



(9) for the substances referred to in annex 3 to this Decree, section Incomplete

a list of additives which may be used for the production of plastics, section B

the specific migration limits shall apply from the 1. January 2004, if validation is

the conformity of carried out using the simulant D or the use of spare

the fatty food simulants in accordance with Annex No 4 to this Ordinance. ".



14. In section 20 (2). 5, the words "the approved types of polypropylene oil"

replaced by the words "polypropylénovým oil".



15. In § 21. 3 the word "foodstuffs" shall be replaced by the word "food".



16. In section 23, paragraph. 5 (a). (b)) for the word "casings" following the word "from".



17. Appendix 3:



"The annex No. 3 to Decree No. 38/2001 Sb.



The requirements on plastics and plastic products LIST of MONOMERS, additives and OTHER

STARTING SUBSTANCES, WHICH MAY BE USED FOR THE MANUFACTURE OF PRODUCTS FROM PLASTIC



1. This annex contains the list of monomers, additives and other default

substances, which may be used for the production of plastics and plastic products,

intended to come into contact with foodstuffs. In the list are included



-default substance for polymerization, which includes polykondenzaci, polyadici

or any other similar process of formation of macromolecules,



-natural or synthetic macromolecular substances used for the manufacture of

of modified macromolecules, if the monomers or the other starting

the substances necessary for their manufacture are not included in the list,



-substances used to modify existing natural or

synthetic macromolecular substances



-substances which are added to plastics to achieve a technical effect

on the final product and are intended to be contained in the final

products,



-substances, which are used to create the environment in which

polymerization occurs (e.g. emulsifiers, surfactants,

buffer solutions, etc.).



2. In the list are included salts of aluminium, calcium, iron, magnesium,

potassium, sodium, zinc and salts (including double salts and acid salts)

of authorised acids, phenols or alcohols, as are also allowed.

The name "salt" appears in the list only if the corresponding free

acid (acid free) is not in the list (not in the list

listed). In such cases, the term "salt" means salt

"aluminum, calcium, iron, magnesium, potassium, sodium, zinc and salts

ammonium ".



3. the following are not included in the list of substances, although they may be

present:



and) substances that may be present in the final product:



-impurities in the substances used,



-reaction intermediates,



-degradation products,



b) oligomers and natural or synthetic macromolecular substances and their

mixtures, if the monomers or starting substances required for their synthesis

included in the list,



(c) mixtures of substances),



(d)) the substances which directly influence the formation of polymer (e.g. catalytic

systems).



Products, which contain the substances referred to in (a)), (b)) and (c)) must

comply with the requirements set out in § 3 (3). 1 of this order.



4. substances shall be of good technical quality as regards the criteria

purity.



5. For contact with foodstuffs can be applied only to products obtained

bacterial fermentation in accordance with Appendix I to this annex.



6. the list contains the following information:



-column 1 (Ref. No.): the EEC packaging material reference number for the

the substance in the list,



-column 2 (CAS): CAS registration number (Chemical Abstracts

Service),



-column 3 (name): the chemical name,



-column 4 (restrictions and/or specifications) contains:



-specific migration limit (SML),



-maximum permitted quantity of the substance in the finished material or product

(QM),
-maximum permitted quantity of the substance in the finished material or product

expressed in mg/6 dm2 in contact with foodstuffs (QMA),



-any other restriction specifically mentioned,



-all specifications related to the substance or polymer.



7. If a substance that is listed in the list individually, is also

in the General Group, for this group, the restrictions referred to in

individually listed substances.



8. If the CAS number does not match the chemical name, chemical name

precedence over the CAS number. If the CAS number, the EINECS, according to registry

does not match the number of CAS in accordance with the CAS registry, the CAS registry shall apply according to the CAS.



9. In the tables in column 4 are used abbreviations and expressions that have

the following meanings:



DL = detection limit of the analytical method,



FP = final material or product



NCO = isocyanates,



ND = not to be detected. For the purposes of this order means that the substance

may not be detected by certified analytical method is specified by the

the limit of detection (DL). If such a method does not exist, proceed to

in drawing up the proven methods in accordance with section 4, paragraph 4. 1 of the Decree,



QM = maximum permitted quantity of the "residual substances" in the material, or

the product,



QM (T) = maximum permitted quantity of the "residual" substance in the material or

the product, expressed as the total contents of the listed substances or groups of substances.

For the purposes of this Ordinance, the amount of the substance in the material or product

provides validated method of analysis. If such a method

does not exist, proceed to the elaboration of the proven methods in accordance with § 4

paragraph. 1 of the Decree,



QMA = maximum permitted quantity of the "residual" substance in the material or

the product, expressed in mg per 6 dm2 of the area in contact with foodstuffs,



QMA (T) = maximum permitted quantity of the "residual substances" in the material, or

the product, expressed as the total content of substances or groups of substances listed in

mg per 6 dm2 of the area in contact with foodstuffs. For the purposes of this Ordinance,

the quantity of the substance in the material or a product certified by the analytical

method. If such a method does not exist, proceed to the

developing proven methods according to the section 4, paragraph 4. 1 of the Decree,



SML = specific migration limit in food or in the food

the simulant, unless stated otherwise. For the purposes of this order, the value of

the specific migration of the substance of the material or product certified

the method of analysis. If such a method does not exist, proceed to

in drawing up the proven methods in accordance with section 4, paragraph 4. 1 of the Decree,



SML(t) = specific migration limit in food or in the food

simulant expressed as total content of listed substances or groups of

substances. For the purposes of this order, the quantity of the substance or group of substances in

material or product certified by the method of analysis. If

such a method does not exist, proceed to the elaboration of the proven methods

According to the section 4, paragraph 4. 1 of the Decree.



LIST OF AUTHORISED MONOMERS AND OTHER STARTING SUBSTANCES



SECTION AND

-----------------------------------------------------------------------------------------------------------------------

REF No. CAS number Name restrictions and/or specifications

(1) (2) (3) (4)

-----------------------------------------------------------------------------------------------------------------------

10030 000514-10-3 abietová acid

10060 000075-07-0 acetaldehyde SML(t) = 6 mg/kg (2)

10090-000064 19-7 acetic acid

10120 000108-05-4 vinyl acetate SML = 12 mg/kg

10150 000108-24-7 acetic anhydride

10210 000074-86-2, acetylene

10630 000079-06-1 acrylamide SML = ND (DL = 0,01 mg/kg)

10660 015214-89-8, 2-akrylamido-2-SML = 0.05 mg/kg

methylpropanesulfonic acid

10690 000079-10-7 acrylic acid

10750 002495-35-4-benzyl acrylate

10780 000141-32-2, n-butyl-acrylate

10810 002998-08-5, SEC-butyl-acrylate

10840 001663-39-4-tert-butyl-acrylate

11000 050976-02-8 dicyklopentadienyl-QMA = 0.05 acrylic mg/6 dm2

11245 002156-97-0-dodecyl ester SML = 0.05 mg/kg (1)

11470 000140-88-5 ethyl acrylate

11510 000818-61-1-hydroxyethyl acrylate see monoester acrylic

acid with ethylene glycol

11530 000999-61-1, 2-hydroxy-acrylic QMA = 0.05 mg/6 dm2

11590 000106-63-8-isobutyl acrylate

11680 000689-12-3-isopropyl-acrylic

11710 000096-33-3-methyl acrylate

11830 000818-61-1 acrylic acid monoester

with ethylene glycol

11890 002499-59-4, n-Octyl-acrylic

11980-000925 60-0-propyl acrylate

12100 000107-13-1 acrylonitrile SML = ND

(DL = 0.020 mg/kg, including

uncertainty of measurement)

12130 000124-04-9-adipová acid

12265 004074-90-2, divinyl-adipát QM = 5 mg/kg in FP for

use only as komonomer.

12280 002035-75-8 adipanhydrid

12310-albumin

12340-alburmin koagulovaný

formaldehyde

12375-alcohols, alifatickés one

a group of OH, saturated,

linear, primary (C4-C22)

12670 002855-13-2, 1-amino-3aminomethyl-3, 5.5-SML = 6 mg/kg

trimethylcyklohexan

12761 000693-57-2 12-aminododecanoic acid acid SML = 0.05 mg/kg

12763 000141-43-5, 2-aminoethanol SML = 0.05 mg/kg. The substance

may not be used in

polymers in contact with

the food, for which it is

According to annex No. 4 of this

the Decree provided for the use of

simulant D; the substance may be

used only for indirect

contact with food, a separate

a layer of PET

12765 084434-12-8 N-(2-aminoethyl)-beta-SML = 0.05 mg/kg

alanine, sodium salt

12788 002432-99-7 11-aminoundekanová acid SML = 5 mg/kg

12789 007664-41-7 ammonia

12820 000123-99-9 azelaic acid;

nonandiová acid

12970 004196-95-6 azelanhydrid; anhydride

nonandiové acid

13000 001477-55-0 1.3-benzendimethanamin; SML = 0.05 mg/kg

1.3-bis (aminomethyl) benzene

13060 004422-95-1, trichlorid 1, 3, 5-QMA = 0.05 mg/6 dm2

benzentrikarboxylové (measured as 1, 3, 5

acid; benzentrikarboxylová

benzene-1,3,5-tri acid)

(Carbonyl chloride)

13075 000091-76-9 see 2.4-diamino benzoguanamine-6-phenyl-

1, 3, 5-triazin

13090 000065-85-0 benzoic acid

13150 000100-51-0, benzyl alcohol

13180 000498-66-8-bicyklo [2.2.1] hept-2en, SML = 0.05 mg/kg

norbornen,

13210 001761-71-3 bis (4-aminocyklohexyl) SML = 0.05 mg/kg

methane

13326 000111-46-6 bis (2-hydroxyethyl) ether diethylene glycol, see.

13380 000077-99-6 2.2-bis (hydroxymethyl)-see 1, 1, 1-trimethylolpropan

Butan-1-ol;

2-ethyl-2-(hydroxymethyl)

propane-1.3-diol

13390 000105-08-8 1.4-bis (hydroxymethyl)

cyclohexane

13395 004767-03-7 2.2-bis (hydroxymethyl) QMA = 0.05 mg/6 dm2

also named propionic acid

13480 000080-05-7 2.2-bis (4-hydroxyphenyl) SML = 3 mg/kg

propane

13510 001675-54-3-2.2-bis (4-hydroxyphenyl) according to the sanitary requirements

propane-bis (2,3-epoxypropyl) Annex No. 15 of this Decree

ether;

Bisphenol a diglycidyl ether and

(= BADGE);

2.2-bis [4-(2.3-

epoxypropoxy) phenyl] propane

13530 038103-06-9-2.2-bis (4-hydroxyphenyl) SML = 0.05 mg/kg

propane bis (phthalic anhydride)-

13550 000110-98-5 bis (hydroxy) ether see dipropylene glycol will

13560 005124-30-1, bis (4-isokyanatocyklohexyl) see dicyklohexylmethan-4, 4 '-

methane diisocyanate

13600 047465-97-4-3.3-bis (3-methyl-4-SML = 1.8 mg/kg

hydroxyphenyl-indolin-2-on

13607 000080-05-7 phenol, and see 2.2-bis (4-hydroxyphenyl)

propane

13610 001675-54-3, Bisphenol A bis (2,3-see 2.2-bis (4-hydroxyphenyl)

epoxypropyl) ether (= propane-bis (2,3-epoxypropyl)

BADGE) ether

13614 038103-06-9 Bisphenol A bis (phthalic anhydride) see 2, 2-bis (4-hydroxygfenyl)

propane bis (phthalic anhydride)-

13617 000080-09-1 of Bisphenol a with 4,4 '-see

dihydroxydifenylsulfon
13620 010043-35-3, boric acid SML (T)-6 mg/kg (23)

(expressed as boron) without

prejudice to the provisions

about the indicators

the quality of drinking water from

the legislation, which

sets out the requirements for potable

water

13630 000106-99-0 butadiene QM = 1 mg/kg in FP or

SML = ND

(DL = 0.02 mg/kg, including

uncertainty of measurement)

13690 000107-88-0 butane-1.3-diol

13720 000110-63-4 butane-1.4-diol SML(t) = 0.05 mg/kg (24)

13780 002425-79-8 1.4-Butanediol-bis (2,3-QM = 1 mg/kg in FP (expressed as

epoxypropyl) ether; as the epoxy group

1.4-bis (2,3-epoxypropoxy) molecular weight = 43

butane

13810 000505-65-7 butane-1.4-diolformal; QMA = 0.05 mg/6 dm2

1.3-dioxepan

13840 000071-36-3 butan-1-ol

13870 000106-98-9-1-en

13900 000107-01-7-2-en

13932 00598-32-3-3-en-2-ol QMA = ND

(DL = 0.02 mg/6 dm2). Only

for use as a copolymer

for the preparation of the curing

ingredients

14020 000098-54-4 4-tert-butylfenol SML = 0.05 mg/kg

14110 000123-72-8 butyraldehyde;

butanaldehyd

14140 000107-92-6 butyric acid;

butanová acid

14170 000106-31-0 butyric acid anhydride;

butananhydrid

14200 000105-60-2, caprolactam; SML(t) = 15 mg/kg (5)

hexano-6 a lactam antibiotic

14230 002123-24-2, caprolactam, sodium salt; SML(t) = 15 mg/kg (5)

hexano-6-a lactam, sodium salt (expressed as caprolactam)

14320 000124-07-2 Caprylic acid;

octanoic acid

14350 000630-08-0 carbon monoxide

14380 000075-44-5-Carbonyl chloride QM = 1 mg/kg in FP

14411 008001-79-4 castor oil

14500 009004-34-6 cellulose

14530 007782-50-5 chlorine

14570 000106-89-8, 1-chloro-2.3-is see epichlorohydrin

14650 000079-38-9 chlortrifluorethen QMA = 0.5 mg/6 dm2

14680 000077-92-9 citric acid

14710 000108-39-4, m-cresol

14740 000095-48-7 o-cresol

14770 00106-44-5 p-cresol

14841-000599-64-4 4-(1-phenyl-1-methtylethyl) SML = 0.05 mg/kg

phenol

14880 000105-08-8 1.4-cyklohexandimethanol see 1.4-bis (hydroxymethyl)

cyclohexane

14950 003173-53-3, cyklohexyl-isocyanate QM (T) = 1 mg/kg in FP

(expressed as NCO) (26)

15030 00931-88-4 cyklookten SML = 0.05 mg/kg. The substance may be

used in polymers in contact

with food for

According to annex No. 4 of this

the Decree provided for the use of

the simulant and the

15070-001647 16-1 blanket-1.9-dien SML = 0.05 mg/kg

15095 000334-48-5-dekanová acid

15100 000112-30-1, Dean-1-ol

15130 000872-05-9 dec-1-en SML = 0.05 mg/kg

15250 000110-60-1 butane-1.4-diamine

15272 000107-15-3 ethane-1.2-diamine see ethylenediamine

15274 000124-09-3 hexane-1.6-diamine, see hexamethylendiamin

15310 000091-76-9 2.4-diamino-6-phenyl-QMA = 5 mg/6 dm2

1, 3, 5-triazin; 6-phenyl-

1, 3, 5-triazin-2.4-diamine

15370 003236-53-1, 1.6-diamino-2, 2.4-QMA = 5 mg/6 dm2

trimethylhexan; 2, 2, 4,-

trimethylhexan-1.6-diamine

15400 003236-54-2 1.6-diamino-2, 4.4-QMA = 5 mg/6 dm2

trimethylhexan; 2, 4, 4,-

trimethylhexan-1.6-diamine

15565 000106-46-7 1.4-dichlorbenzen SML = 12 mg/kg

15610 00080-07-9 '-dichlordifenylsulfon SML = 0.05 mg/kg

15700 005124-30-1, dicyklohexylmethan-4, 4 '-QM (T) = 1 mg/kg in FP

diisocyanate; bis (4-(expressed as NCO) (26)

isokyanatocyklohexyl) methane;

4,4 '-

methylendicyklohexyldiisokyanát

15760 000111-46-6 bis (2-hydroxyethyl) ether; SML(t) = 30 mg/kg (3)

diethylene glycol

15790 000111-40-0 diethylenetriamine SML = 5 mg/kg

15820 000345-92-6 ' difluorbenzofenon SML = 0.05 mg/kg

15880 000120-80-9 1.2-dihydroxybenzen; SML = 6 mg/kg

benzene-1.2-diol

15910 000108-46-3 1.3-dihydroxybenzen; SML = 2.4 mg/kg

benzene-1.3-diol

15940 000123-31-9 1.4-dihydroxybenzen; SML = 0.6 mg/kg

benzene-diol 1, 4,

15970 000611-99-4, 4 '-dihydroxybenzofenon SML(t) = 6 mg/kg (15)

16000 000092-88-6 '-dihydroxybifenyl SML = 6 mg/kg

16090 00080-09-1, 4 '-dihydroxydifenylsulfon; SML = 0.05 mg/kg

4,4 '-sulfonyldifenol

16150 000108-01-0 2-(dimethylamino) ethane-SML = 18 mg/kg

1-ol

16240 000091-97-4, 3,3-dimethyl-4, 4 '-QM (T) = 1 mg/kg in FP

diisokyanatobifenyl; (expressed as NCO) (26)

4,4 '-methylenebis (2-

methylfenyl diisocyanate);

bis (4-isokyanato-3-

methylfenyl) methane

16360 000576-26-1, 2.6-dimethylphenol SML = 0.05 mg/kg

16390 000126-30-7 2,2 '-e.g. dimethylpropane-SML = 0.05 mg/kg

1.3-diol;

neopentylglykol

16450 000646-06-0 1.3-dioxolan SML = 0.05 mg/kg

16480 000126-58-9 dipentaerythritol

16570 004128-73-8 diphenyl ethers-4, 4 '-QM (T) = 1 mg/kg in FP

diisocyanate; bis (4-(expressed as NCO) (26)

isokyanatofenyl) ether;

4,4 '-oxydifenyldiisokyanát

16600 005873-54-1, difenylmethan-2, 4 '-QM (T) = 1 mg/kg in FP

diisocyanate; (expressed as NCO) (26)

the 2,4 '-

methylenediphenyl diisocyanate;

(2-isokyanatofenyl) (4-

isokyanatofenyl) methane

16630 000101-68-8 difenylmethan-4, 4 '-QM (T) = 1 mg/kg in FP

diisocyanate; 4,4 '-(expressed as NCO) (26)

methylenediphenyl diisocyanate;

bis (4-isokyanatofenyl) methane

16650 000127-63-9 difenylsulfon SML (T) = 3 mg/kg (25)

16660 000110-98-5 dipropylene glycol will

16690 001321-74-0 divinylbenzen QMA = 0.01 mg/6dm2 or

SML = ND (DL = 0.02 mg/kg,

including measurement uncertainty) for

the sum of divinylbenzene and

ethylvinylbenzenu and in accordance

with the specifications laid down

in Appendix II

16694 013811-50-2, N, N '-divinylimidazolidin-QM = 5 mg/kg in FP

2-on

16697 000693-23-2 dodecanedioic acid

16704 000112-41-4 dodec-1-en SML = 0.05 mg/kg

16750 000106-89-8 epichlorohydrin QM = 1 mg/kg in FP

16780 000064-17-5 ethanol

16950 000074-85-1 ethylene;

ethylene

16960 000107-15-3 ethylenediamine SML = 12 mg/kg

16990 000107-21-1 ethane-1.2-diol SML(t) = 30 mg/kg (3)

ethylene glycol

17005 000151-56-4 parent SML = ND (DL = 0.01 mg/kg)

17020 000075-21-8 EO QM = 1 mg/kg in FP

17050 000104-76-7 2-ethylhexan-1-ol SML = 30 mg/kg

17160 000097-53-0 eugenol; SML = ND (DL = 0.02 mg/kg,

2-methoxy-4-(2-propen-including measurement uncertainty)

YL) phenol

17170 061788-47-4 fatty acids, coconut

17200 068308-53-2 fatty acids, soya

17230-12 061790-3 fatty acids, tálový oil

17260 000050-00-0 formaldehyde SML(t) = 15 mg/kg (22)

17290 000110-17-8 fumaric acid

17530 000050-99-7 glucose

18010 000110-94-1 glucaric acid

18070 000108-55-4 glutaranhydrid

18100 000056-81-5, glycerol

18220 068564-88-5 N-SML = 0.05 mg/kg (1)

heptylaminoundekanová

acid

18250 000115-28-6 hexachlorendomethylentetra-SML = ND (DL = 0.01 mg/kg)

hydroftalová acid;

1, 4, 5, 6, 7, 7,-

hexachlorbicyklo [2.2.1]
hept-5-en-2.3-

dikarboxylová acid

18280 000115-27-5 hexachlorendomethylentetra-SML = ND (DL = 0.01 mg/kg)

hydroftalanhydrid;

anhydride of 1, 4, 5, 6, 7, 7,-

hexachlorbicyklo [2.2.1]

hept-5-en-2.3-

dicarboxylic acids

18310 036653-82-4, hexadekan-1-ol

18430 000116-15-4 hexafluorpropylen SML = ND (DL = 0.01 mg/kg)

18460 000124-09-4 hexamethylendiamin; SML = 2.4 mg/kg

hexane-1.6-diamine

18640 000822-06-0 hexamethylendiisokyanát; QM (T) = 1 mg/kg in FP

hexane-1.6-diryldiisokyanát; (expressed as NCO) (26)

1.6-diisokyanatohexan

18670 000100-97-0 hexamethylenetetramine SML(t) = 15 mg/kg (22)

(expressed as formaldehyde)

18820 000592-41-6 hex-1-en SML = 3 mg/kg

18867 000123-31-9 hydroquinone; see 1.4-dihydroxybenzen

benzene-1.4-diol

18880 000099-96-7 of p-hydroxybenzoic acid acid;

4-Hydroxybenzoic acid acid

18897 016712-64-4 6-hydroxynaphthalene-2-SML = 0.05 mg/kg

carboxylic acid

18898 000103-90-2, N-(4-hydroxyphenyl) acetamide only for use in liquid

crystals and mezivrstvě

multilayer polymer

19000 000115-11-7 isobutene

19060 000109-53-5 (vinyl) isobutyl ether QM = 5 mg/kg in FP

19110 004098-71-9-3-(isokyanatomethyl) -3,5, 5-QM (T) = 1 mg/kg in FP

trimethylcyklohexylisokyanát (expressed as NCO) (26)

19150 000121-91-5 1.3-Benzenedicarboxylic SML = 5 mg/kg

acid;

isoftalová acid

19210 001459-93-4 dimethyl-isoftalát SML = 0.05 mg/kg

19243 000078-79-5 isoprene see 2-methylbuta-1.3-dien

19270 000097-65-4-itakonová acid;

prop-2-en-1.2-dikarboxylová

acid

19460 000050-21-5 the lactic acid

19470 000143-07-7 lauric acid;

dodekanová acid

19480 002146-71-6 vinyl-the Irgun;

Vinyl-dodekanoát

19490 000947-04-6 laurolaktam; SML = 5 mg/kg

dodekano-12-a lactam

19510 011132-73-3 lignocelulosa

19540 000110-16-7-maleinová acid; SML(t) = 30 mg/kg (4)

(Z)-butenedioic acid

19960 000108-31-6 maleic anhydride SML(t) = 30 mg/kg (4)

(expressed as maleinová

acid)

19975 000108-78-1, Melamine; see the 2, 4, and 6-triamino-1,3,5-

1, 3, 5-triazin-2, 4,6-triazin

Zine

19990 000079-39-0 methakrylamid SML = ND (DL = 0.02 mg/kg,

including measurement uncertainty)

20020 000079-41-4 methacrylic acid

20050 000096-05-9 allyl methacrylate SML = 0.05 mg/kg

20080 002495 37-6-benzyl-methacrylate

20110 000097-88-1-butyl methacrylate

20140 002998-18-7 sec-butyl methacrylate

20170-07-09 000585 tert-butyl methacrylate

20260 000101-43-9 cyklohexyl-methacrylate SML = 0.05 mg/kg

20410 002082-81-7 acid diester SML = 0.05 mg/kg

methacrylic with butane-

1.4-diol

20530 002867-47-2, 2-(dimethylamino) ethyl-SML = ND (DL = 0.02 mg/kg,

methacrylate, including measurement uncertainty)

20590 000106-91-2-2.3-epoxypropyl methacrylate QMA = 0.02 mg/6 dm2

20890 000097-63-2-ethyl-methacrylate

21010 000097-86-9 isobutyl methacrylate

21100 004655-34-9 isopropyl-methacrylate

21130 000080-62-6 methyl-methacrylate

21190 000868-77-9 methacrylic monoester

acid with ethylene glycol

21280-002177 70-0 phenyl-methacrylate

21340 002210-28-8 propyl methacrylate

21460 000760-93-0 methakrylanhydrid

21490 000126-98-7 methakrylnitril SML = ND (DL = 0.02 mg/kg,

including measurement uncertainty

21520 001561-92-8 sodium methallylsulfonát SML = 5 mg/kg

21550 000067-56-1 methanol

21640 000078-79-5 2-methylbuta-1.3-dien QM = 1 mg/kg in FP or

SML = ND (DL = 0.02 mg/kg,

including measurement uncertainty)

21730 000563-45-1, 3-methylbut-1-en-QMA = 0.006 mg/6 dm2. Only

for use in polypropylene.

21765 106246-33-7, 4 '-methylenebis (3-QMA = 0.05 mg/6 dm2

chloro-2.6-diethylanilin)

21821 000505-65-7 1.4-(methylendioxy) butane; see butane-1.4-diolformal

1.3-dioxepan

21940 000924-42-5 N-methylolakrylamid SML = ND (DL = 0.01 mg/kg)

22150 000691-37-2-(methyl) pent-1-en SML = 0.02 mg/kg

22331 025513-64-8 mixture of (40% w/w) 1.6-diamino-QMA = 5 mg/6 dm2

2.2, 4trimethylhexanua

(60% w/w) 1,6-diamino-

2, 4, and 4-trimethylhexanu

22332 028679-16-5 a mixture of (40% w/w) 2, 2 ', 4-QM (T) = 1 mg/kg (expressed as

trimethylhexan and-1.6-as NCO) (26)

diyldiisokyanátu (60%)

2, 4, and 4-trimethylhexan-

1.6-diryldiisokynátu

22350 000544-63-8-myristová acid;

tetradekanová acid

22360 001141-38-4, naphthalene-2.6-dikarboxylová SML = 5 mg/kg

acid

22390 000840-65-3 dimethyl-2.6-SML = 0.05 mg/kg

naftalendikarboxylát

22420 003173-72-6 1.5-naphthalene diisocyanate-QM (T) = 1 mg/kg in FP

(expressed as NCO) (26)

22437 000126-30-7 neopentylglykol see e.g. dimethylpropane-1.3 2,2--

diol

22450 009004-70-0 nitrocellulose

22480 000143-08-8 nonan-1-ol

22550 000498-66-8 norbornen see bicyklo [2.2.1] hept-

2-en

22570 000112-96-9 oktadecylisokyanát; QM (T) = 1 mg/kg in FP

1-isokyanatooktadekatn (expressed as NCO) (26)

22600 000111-87-5 octane-1-ol

22660 000111-66-0 Oct-1-en SML = 15 mg/kg

22763 000112-80-1 oleic acid;

(z)-9-enová acid

22778 007456-68-0 4,4 '-oxybis QMA = 0.05 mg/6 dm2

(benzensulfonylazid)

22780 000057-Palmitic acid, 10-3;

hexadekanová acid

22840 000115-77-5 of pentaerythritol

22870 000071-41-0, pentan-1-ol

22900 000109-67-1, pent-1-en SML = 5 mg/kg

22937 001623-05-8 perfluorpropyl SML = 0.05 mg/kg

(perfluorvinyl) ether

22960 000108-95-2 phenol

23050 000108-45-2 1.3-Phenylenediamine SML = ND (DL = 0.02 mg/kg,

including measurement uncertainty

23155 000075-45-5 phosgene; see Carbonyl chloride

Carbonyl chloride

23170 007664-38-2 phosphoric acid QM = ND (DL = 1 mg/kg in FP)

23175 000122-52-1, triethyl-fosfit QM = ND (DL = 1 mg/kg in FP)

23187-ftalová acid see Terephthalic acid

23200 000088-99-3-ftalová acid

23230 000131-17-9-diallyl-phthalate SML = ND (DL = 0.01 mg/kg)

23380 000085-44-9 phthalic anhydride

23470 000080-56-8 alpha-pinene

23500 000127-91-3 beta-pinene;

6.6-dimethyl-2-

methylidenbicyklo [3.1.1]

heptane

23547 009016-00-6 polydimethylsiloxane in accordance with specifications

063148-62-9 (molecular weight referred to in Appendix II to this

more than 6 800) Annex

23590 025322-68-3 polyethylene glycol

23651 025322-69-4 polypropylene glycol

23740 000057-55-6 propane-1.2-diol

23770 000504-63-2 propane-1.3-diol SML = 0.05 mg/kg

23800 000071-23-8, propan-1-ol

23830 000067-63-0 propan-2-ol

23860 000123-38-6 propanaldehyd;

propionaldehyde

23890 000079-09-4, also named propionic acid;

propionic acid

23920 000105-38-4-vinyl-propanoát SML(t) = 6 mg/kg (2)
(expressed as acetaldehyde)

23950 000123-62-6 propananhydrid

23980 000115-07-1 propylene;

condensation reactions

24010 000075-56-9 propylene oxide QM = 1 mg/kg in FP

24051 000120-80-9 catechol; See 1.2-dihydroxybenzen

benzene-1.2-diol

24057 000089-32-7 pyromelitanhydrid; SML = 0.05 mg/kg (expressed as

benzene-1, 2, 4, 5-pyromelitová acid) as the

tetrakarboxydianhydrid

24070 073138-82-6 resin kyselinya

Rosin acids

24072 000108-46-3 resorcinol; see 1.3-dihydroxybenzen

benzene-1.3-diol

24073 000101-90-6 resorcinol (diglycidyl) QMA = 0.005 mg/6 dm2. The substance

ether may be used in polymers

in contact with food, for

that is according to annex No 4

This Decree provided for

application of simulant D;

the substance may be used only

for indirect contact with

food, separated by a layer of

PET

24100 008050-09-7 Rosin

24130 008050-09-7 kalafunová resin see Rosin

24160 008052-10-6 kalafunový talový oil

24190 009014-63-5 wood Rosin

24250 009006-04-6 rubber, natural

24270 000069-72-7 salicylic acid

2-hydroxybenzoic acid acid

24280 000111-20-6 sebacic acid

dodecanedioic acid

24430 002561-88-8 sebakanhydrid

dekandiové anhydride

acid

24475 001313-82-2 sodium sulfide

24490 000050-70-4, sorbitol

24520 008001-22-7 soybean oil

24540 009005-25-8 starch, food

24550 000057-11-4 stearic acid

oktadekanová acid

24610 000100-42-5 styrene

24760 026914-43-2, styrensulfonová acid SML = 0.05 mg/kg

24820 000110-15-6 amber acid

24850 000108-30-5, amber acid anhydride

24880 000057-50-1 sucrose

24887 006362-79-4, monosodium salt 5-SML = 5 mg/kg

sodiosulphoisophthalic acid acid

24888 003965-55-7, monosodium salt dimethylesteru SML = 0.05 mg/kg

5-sodiosulphoisophthalic acid acid

24910 000100-21-0 Terephthalic acid SML = 7.5 mg/kg

24940 000100-20-9 dichlorid Terephthalic SML(t) = 7.5 mg/kg (expressed as

Terephthalic acid as acid)

24970 000120-61-6-dimethyl terephthalate

001120 25080-36-1, tetradec-1-en SML = 0.05 mg/kg

25090 000112-60-7 tetraethylenglykol

25120 000116-14-3 tetrafluorethylen SML = 0.05 mg/kg

25150 000109-99-9 tetrahydrofuran SML = 0.6 mg/kg

25180 000102-60-3, N, N, N ', N '-tetrakis

(2-hydroxypropyl)

ethylenediamine

25210 000584-84-9 2.4-diisocyanate toulen-; QM (T) = 1 mg/kg in FP

1.3-diisokyanato-4-(expressed as NCO) (26)

methyl

25240 000091-08-7 2.6-diisocyanate toulen-; QM (T) = 1 mg/kg in FP

1.3-diisokyanato-2-(expressed as NCO) (26)

methyl

25270 026747-90-0 2.4-diisocyanate toulen-, dimer; QM (T) = 1 mg/kg in FP

1.3-diisokyanato-4-(expressed as NCO) (26)

methyl, dimer

25360-2.3-epoxypropyl-trialkyl QM = 1 mg/kg in FP

(C5-C15) acetate (expressed as epoxy group

molecular weight = 43)

25380-vinyl-trialkyl (C7-C17) QMA = 0.05 mg/6 dm2

acetates (= vinyl-versatáty)

25385 000102-70-5 triallylamin in accordance with the specifications

set out in Appendix II to this

Annex

25420 000108-78-1, 2, 4, and 6-triamino-1,3,5-SML = 30 mg/kg

triazin

25450 026896-48-0 tricyklodekandimethanol SML = 0.05 mg/kg

25510 000112-27-6 triethylene glycol

25600 000077-99-6, 1, 1, 1-trimethylolpropan; SML = 6 mg/kg

2-ethyl-2-(hydroxymethyl)

propane-1.3-diol

25840 003290-92-4 2.2-bis SML = 0.05 mg/kg

(methakryloxymethyl)-yl-

methakralát

25900 000110-88-3 trioxan SML = 0.05 mg/kg

25910-024800 44-0 tripropylenglykol

25927 027955-94-8, 1, 1, 1 '-tris (4-hydroxyphenyl) QM = 0.5 mg/kg in FP.

Ethan for use in polykarbonátech

25960 000057-13-6 urea

26050 000075-01-4 vinyl chloride, see the requirements of this order

26110 000075-35-4 vinylidene chloride QM = 5 mg/kg in FP or

SML = ND

(DL = 0.05 mg/kg)

26140 000075-38-7 vinyliden-fluoride SML = 5 mg/kg

26155 001072-63-5 1-vinylimidazol QM = 5 mg/kg in FP

26270 003195-78-6 N-vinyl-N-QM = 2 mg/kg in FP

methylacetamid

26320 002768-02-7 vinyltrimethoxysilan QM = 5 mg/kg in FP

26360-18 007732-5 the water in accordance with the law

which lays down requirements for the



drinking water



SECTION B

List Of Monomers And Other Starting Substances, Which MAY BE

CONTINUE TO BE USED PENDING A DECISION ON INCLUSION IN SECTION A



-----------------------------------------------------------------------------------------------------------------------

REF No. CAS number Name restrictions and/or specifications

(1) (2) (3) (4)

-----------------------------------------------------------------------------------------------------------------------

10599/90A-061788 89-4 fatty acids, unsaturated

(C18), dimers, distilled

10599/91 061788-89-4 fatty acids, unsaturated

(C18), dimers, non-distilled

10599/92A 068783-41-5 fatty acids, unsaturated

(C18), dimers, hydrogenated,

distilled

10599/93 068783-41-5 fatty acids, unsaturated

(C18), dimers, hydrogenated,

non-distilled

11500 000103-11-7 2-ethylhexyl-acrylate

13050 00528-44-9-1, 2, 4-benzentrikarboxylová see trimellitic acid

acid

14260 000502-44-3 kaprolakton

hexano-6lakton

14800 003724-65-0 krotonová acid

(E)-2-enová acid

15730 000077-73-6 of dicyclopentadiene

16210 006864-37-5, 3,3-dimethyl-4, 4 '-

diaminodicyklohexylmethan;

4,4 '-methylenebis (2-

methylcyklohexanamin)

17110 016219-75-3, 5-ethylidenbicyklo [2.2.1]

hept-2-en

18370 000592-45-0, hexa-1.4-dien

18700 000629-11-8 hexane-1.6-diol

21370 010595-80-9, 2-sulfoethyl methacrylate

21400 054276-35-6 sulfopropyl methacrylate

21970 000923-02-4, N-methylolmethakrylamid

22210 000098-83-9 alpha-methylstyren

25540 000528-44-9 trimellitic acid; QM (T) = 5 mg/kg in FP

benzene-1, 2,4-trikarboxylová

acid

25550 000552-30-7 trimelitanhydrid; QM (T) = 5 mg/kg in FP

anhydride benzene-1, 2,4-(expressed as trimellitic

acid trikarboxylové acid)

26230 000088-12-0 vinylpyrrolidone



AN INCOMPLETE LIST OF ADDITIVES WHICH MAY BE USED FOR

PRODUCTION OF PLASTICS



SECTION AND

-----------------------------------------------------------------------------------------------------------------------

REF No. CAS number Name restrictions and/or specifications

(1) (2) (3) (4)

-----------------------------------------------------------------------------------------------------------------------

30000-000064 19-7 acetic acid

30045 000123-86-4 butyl acetate

30080 004180-12-5 acetic acid, měďná salt SML (T) = 30 mg/kg (7)

(expressed as copper)

30140 000141-78-6 ethyl acetate

30280 000108-24-7 acetic anhydride

30295 000067-64-1 acetone

30370-acetyloctová acid, salts
30400-ACETYLATED glycerides

30610-C2-C24 aliphatic, linear

monocarboxylic acids

natural oils, fats and

their mono-, di-and

triglycerides (including

branched-chain fatty acids,

How does occur naturally

in nature)

30612-synthetic C2-C24-aliphatic,

linear, monocarboxylic

acids and their mono-di-and

triglycerides

30960-esters of aliphatic,

monocarboxylic acids

(C6-C22) with polyglycerolem

31328-fatty acids from animal

or vegetable edible fats

and oils

31530 123968-25-2 2.4-diterc-pentyl-6 [1-(3,5-SML = 5 mg/kg

di-tert-pentyl-2-

hydroxyphenyl phenyl) ethyl]-

Acrylic

31730 000124-04-9-adipová acid;

hexandiová acid

33120-alcohols, aliphatic,

one group OH, saturated,

linear, primary (C4-C24)

33350 009005-32-7-alginová acid

33801-n-alkyl (C10-C13) SML = 30 mg/kg

/benzene sulphonic acid

34240-esters, alkyl (C10-C20) SML = 6 mg/kg

sfenoly sulfonic acid

34281-alkyl (C8-C22) sulphuric acid,

linear, primary, with an even

the number of carbon atoms

34475-hydroxide-fosforitan

calcium-aluminium hydrate

34480-aluminium fibers, flakes

and pills

34560 021645-51-2 aluminum hydroxide

34690 011097-59-9-hydroxide carbonate

magnesium-aluminium

34720-001344 28-1 aluminium oxide

35120 013560-49-1 thiobis (2-hydroxyethyl)

diester 3-aminokrotonové

acid;

thiobis (2-hydroxyethyl)

diester (E)-3-aminobut-

2-enové acid

35160 06642-31-5 to 6-amino-1.3-dimethyluracil SML = 5 mg/kg

35170 00141-43-5 2-aminoethane-1-ol SML = 0.05 mg/kg. The substance must not

be used in polymers in

contact with food for

which is referred to in annex 4 of this

the Decree provided for the use of

simulant D; the substance may be

used only for indirect contact

with food, separate from the

food layer PET

35284 00111-41-1, N-(2-hydroxyethyl) ethane-SML = 0.05 mg/kg. The substance must not

1.2-diamine be used in polymers in

contact with food, for which

It is referred to in annex 4 of this

the Decree provided for the use of

simulant D; the substance smít to be

used only for indirect contact

with food, separate from the

food layer PET

35320 007664-41-7 ammonia

35440 01214-97-9 ammonium bromide

35600 001336-21-6 ammonium hydroxide

35840 000506-30-9-arachidová acid;

ikosanová acid

007771-35845 44-0 arachidonic acid;

(5E, 8E, 11E, 14E)-ikosa-

5, 8, 11, 14-tetraenová

acid

36000 000050-81-7 of Ascorbic acid

36080 000137-66-askorbyl 6-palmitate;

askorbyl-hexadekanoát

36160 010605-09-1 askorbyl-stearate;

askorbyl-octadecanoic acid

36640 000123-77-3 azodikarbonamid; For use only as a

C, C ', '-azodi (formamide) blowing agent

36840 012007-55-5 tetraboritan barium SML(t) = 6 mg/kg (expressed as

as barium)

SML(t) = 6 mg/kg (23)

(expressed as boron) without

prejudice to the provisions of the

the legislation, which

sets out the requirements for potable

water

36880 008012-89-3 beeswax

36960 003061-75-4 behenamid;

dokosanamid

37040 000112-85-6 behenová acid

dokosanová acid

37280 001302-78-9 bentonite

37360 000100-52-7 benzaldehyd in accordance with note

(9) in Appendix III

37600 000065-85-0 benzoic acid

37680 000136-60-7 butyl benzoate

37840 000093-89-0 of ethyl-benzoate

38080 000093-58-3 methyl-benzoate

002315-38160-68 6-propyl benzoate

38320 005242-49-9-4-(2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene)-4 '-in accordance with the specifications

(5-methyl-2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) listed in Appendix II

stilben

38510 136504-96-6 1.2-bis (3-aminopropyl) SML% 5 mg/kg

ethylenediamine, polymer

with N-butyl-2, 2-6, 6-

tetramethyl-4-

piperidinaminem and 2, 4, 6

trichloro-1,3,5-triazine

38515 001533-45-5, 4 '-bis (2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene) SML = 0.05 mg/kg (1)

stilben

38810 080693-00-1 3.9-bis (2,6-di-tert-SML = 5 mg/kg (sum of fosfitů

Butyl-4-methylfenoxy)-and phosphate)

2, 4, 8, 10-tetraoxa-3.9-

difosfaspirol [5.5] undekan;

(bis (2,6-di-tert-butyl-

4-methylfenyl)

pentaerythhritol-bifosfit)

38840 154862-43-8 {3.9-bis (2,4-bis [(phenyl) SML = 5 mg/kg (as the sum

dimethyl] fenoxy} -2,4, 8.10-the substance itself, its oxidized

tetraoxa-3.9-difosfaspirol bis (2, 4dikumylfenyl)

[5.5] undekan; pentaerythritolfosfátu and

bis (2,4-dikumylfenyl) and its hydrolysis product

bifosfit pentaerythritol-2.4-dikumylfenol)

38879 135861-56-2 bis (3,4-dimethylbenzyliden)

sorbitol

38950 079072-96-1, bis (4-ethylbenzyliden)

sorbitol

39200 006200-40-4, bis (2-hydroxyethyl)-2-SML = 1.8 mg/kg

hydroxy-3-(dodecyloxy)

Methyl chloride

39815 182121-12-6 9.9-bis (methoxymethyl) QMA = 0.05 mg/6 dm2

Fluorene

39890 087826-41-3 bis (methylbenzylidene)

069158-41-4, sorbitol

054686-97-4

081541-12-0

39925 129228-21-3-3.3-bis (methoxymethyl)-SML = 0.05 mg/kg

2.5-dimethylhexan

40120 068951-50-8 bis (polyethylene glycol) SML = 0.6 mg/kg

hydroxymethyl fosfonát;

Alpha, Alpha '-

[(hydroxymethyl) fosforyl]

bis [polyoxyethylene sorbitan]

40320 010043-35-3, boric acid SML(t) = 6 mg/kg (23)

(expressed as boron) without

prejudice to the provisions of the

the legislation, which

sets out the requirements for potable

water

40400 010043-11-5 Boron Nitride

40570 000106-97-8 butane

40580 000110-63-4 butane-1.4-diol SML(t) = 0.05 mg/kg (24)

41040 005743-36-2 calcium-butyrate;

calcium-butanoát

41120 10043-52-4 calcium chloride

41280 001305-62-0 calcium hydroxide

41520 001305-78-8 calcium oxide

41600 012004-14-7 sulfohlinitan calcium

037293-22-4

41680 000076-22-2, camphor in accordance with note (9)

in Appendix III,

41760 008006-44-8 wax kandelilla

41840 00105-60-2, caprolactam SML(t) = 15 mg/kg (5)

41960 000124-07-2 Caprylic acid;

octanoic acid

42160 000124-38-9 carbon dioxide

42320 007492-68-4 copper carbonate SML(t) = 30 mg/kg (7)

(expressed as copper)

42500-dioxide acid, salts

42640 009000-11-7 karboxymethylcelulosa

42720 008015-86-9 carnauba wax

42800 009000-71-9 of the casein

42960 064147-40-6 castor oil, anhydrous

43200-castor oil, mono-and

diglycerides

43280 009004-34-6 cellulose

43300 009004-36-8-buryrát of cellulose acetate
43360 068442-85-3 cellulose, regenerated

43440 008001-75-0 ceresin

43515-cholinesterů chlorides QMA = 0.9 mg/6 dm2

fatty acids

coconut oil

44160 000077-92-9 citric acid

44640 000077-93-0 triethylcitrát

45195 007787-70-4 copper bromide SML(t) = 30 mg/kg (7)

(expressed as copper)

45200 001335-23-5 copper iodide SML(t) = 30 mg/kg (7)

(expressed as copper)

SML(t) = 1 mg/kg (11)

(expressed as iodine)

45280-cotton fibres

45450 068610-51-5 p-cresol-dicyclopentadiene-SML = 0.05 mg/kg

isobutylene, copolymer

45560 014464-46-1 kristobalit

45760 000108-91-8 cyklohexylamin

45920 009000-16-2, dammar

45940 000334-48-5, n-dekanová acid

46070 010016-20-3 Alpha-dextrin

46080 007585-39-9 beta-dextrin

46375 061790-53-2 diatomaceous earth

46380 068855-54-9, diatomaceous earth, anhydrous carbonate

sodium, calcined from

the melt

46480 032647-67-9 dibenzyliden-sorbitol

46790 004221-80-1, 2.4-di-tert-

butylfenylester 3.5-di-

tert-butyl-4-

hydroxybenzoic acids

46800 067845-93-6 hexadecylester 3.5-di-tert-

Butyl-4-Hydroxybenzoic acid

acid

46870 003135-18-0 dioktadecylester 3.5-di-tert-

Butyl-4-hydroxybenzylfosfonové

acid

46880 065140-91-2-, monoethyl (3,5-di-tert-SML = 6 mg/kg

Butyl-4-hydroxybenzyl)

fosfonát, calcium salt

47210 26427-07-6 of the dibutyl-thiocíničitan, in accordance with the specifications

polymer; laid down in Appendix II

thiobis (butylcín sulfide),

polymer

47440 000461-58-5 dikyanodiamid

47540 27458-90-8 di-tert-dodecyl-disulfide SML = 0.05 mg/kg

47680 000111-46-6 bis (2-hydroxyethyl) ether; SML(t) = 30 mg/kg (3)

diethylene glycol

48460 000075-37-6-1.1 difluorethan

48620 00123-31-9 1.4-dihydroxybenzen SML = 0.6 mg/kg

48720 00611-99-4, 4 '-dihydroxybenzofenon SML(t) = 6 mg/kg (15)

49485 134701-20-5 2.4-dimethyl-6-(1-SML = 1 mg/kg

methylpentadecyl) phenol

49540 000067-68-5 dimethylsulfoxide

51200 000126-58-9 dipentaerythritol

51700 147315-2-50-2 (4.6-diphenyl-1, 3,5-SML = 0.05 mg/kg)

triazin-2-yl)-5-

(hexyloxy) phenol

51760 025265-71-8 dipropylene glycol will

000110-98-5

52640 016389-88-1 of the Dolomites

52645 10436-08-5-cis-11-eikosenamid;

(Z)-ikos-11-enamid

000112 52720-84-5 erukamid

52730 000112-86-7-eruková acid

52800 000064-17-5 ethanol

53270 037205-99-5 ethylkarboxymethylcelulosa

53280 009004-57-3 ethyl

53360 000110-31-6 N, N '-ethylenbis (oleamid)

53440 005518-18-3 N, N '-ethylenbis

(palmitamid)

53520 000110-30-5, N, N '-ethylenbis (stearamid)

53600 000060-00-4 edetic

acid

53610 054453-03-1 ethylenediaminetetraacetic SML(t) = 30 mg/kg (7)

acid, copper salt (expressed as copper)

53650 000107-21-1 ethane-1.2-diol; SML(t) = 30 mg/kg (3)

ethylene glycol

54005 005136-44-7-N-palmitamid-

N '-stearamid

54260 009004-58-4 ethylhydroxyethylcelulosa

54270-ethylhydroxymethylcelulosa

54280-ethylhydroxypropylcelulosa

54300 118337-09-0, 2 '-bis (ethyliden-4,6-di-SML = 6 mg/kg

tert-butyl-phenyl)

fluorfosfonit

54450 – fats and oils of animal

or plant sources

food

54480-fats and oils of animal

or roslitnných resources

food, hydrogenated

54930 025359-91-6 copolymer of 1-naphthol with SML = 0.05 mg/kg

with formaldehyde;

Poly (1-naphthol-as-

formaldehyde)

55040 000064-18-6 Ant acid

55120 000110-17-8 fumaric acid

55190 029204-02-2-gadoleová acid

55440 009000-70-8 gelatine

55520-glass fibres

55600-glass microspheres

55680 000110-94-1 glucaric acid

55920 000056-81-5, glycerol

56020 099880-64-5-dibehenát;

glycerol-didokosanoát

-esters of glycerol with 56360

acetic acid

glycerol, esters with 56486-acids,

aliphatic, saturated,

linear, with sudýmpočtem

carbon atoms (C14-C18) and

with acids, aliphatic,

unsaturated, linear,

with an even number of carbon

atoms (C16-C18)

glycerol, esters with 56487-acid

upon

56490-acid esters of glycerol

erucic

glycerol, esters with 56495-acid

12-hydroxystearovou

56500-glycerol with acid esters

(a)

56510-esters of glycerol with acid

Linoleic

56520-acid esters of glycerol

myristovou

56540-acid esters of glycerol

oil

56550-acid esters of glycerol

Palmitic acids

56565-acid esters of glycerol

nonanovou

56570-acid esters of glycerol

supply

56580-acid esters of glycerol

ricinolejovou

56585-esters of glycerol with acid

stearic acids

56610 030233-64-8 monobehenát glycerol

56720 026402-23-3 monohexanoát glycerol

56800 030899-62-8 monolaurát-diacetate

glycerol

56880 026402-26-6 monooktanoát glycerol

57040-monooleátu ester of glycerol

acid Ascorbic acid

57120-monooleátu ester of glycerol

with citric acid

57200-monopalmitátu ester of glycerol

acid Ascorbic acid

57280-monopalmitátu ester of glycerol

with citric acid

57600-monostearátu ester of glycerol

acid Ascorbic acid

57680-monostearátu ester of glycerol

with citric acid

57800 018641-57-1-tribehenát;

glycerol-tridokosanoát;

propane-1, 2,3-triyl-tri

(dokosonoát)

57920 000620-67-7 triheptanoát glycerol

58300-glycine, salts

58320 007782-42-5 graphite

58400 009000-30-0 guar gum

58480 009000-01-5 Gum Arabic

58720 000111-14-8 heptanoic acid

59360 000142-62-1, hexanová acid

59760 019569-21-2 huntit

59990 007647-01-0 hydrochloric acid

60030-90 012072-1 hydromagnesit

60080 012304-65-3 hydrotalkit

60160 000120-47-8-ethyl-4-hydroxybenzoát

60180 004191-73 5-isopropyl-4-hydroxybenzoát

60200 000099-76-3-methyl-4-hydroxybenzoát

60240 000094-13-3 propyl-4-hydroxybenzoát

60480 003864-99-1 of 2-(2-hydroxy-3.5-di-tert-SML (T) = 30 mg/kg (19)
butylfenyl)-5-

chlorbenzotriazol

60560 009004-62-0 hydroxyethylcelulosa

60880 009032-42-2 hydroxyethylmethylcelulosa

61120 009005-27-0 hydroxyethylový starch

61390 037353-59-6 hydroxymethylcelulosa

61680 009004-64-2-hydroxypropyl cellulose

61800 009049-76-7 hydroxypropylový starch

61840 000106-14-9-12-hydroxystearic acid acid

62140 006303-21-5-fosforná acid

62240 001332-37-2, iron(ii) oxide

62450 000078-78-4 isopentan

008001 62640-39-6 Japan wax

62720 001332-58-7 kaolin

62800-kaolin, calcined

62960 000050-21-5 the lactic acid

63040 000138-22-7 butyl lactate

63280 000143-07-7 lauric acid;

dodekanová acid

63760 008002-43-5, lecithin

63840 000123-77-2, levulová acid;

4-oxovaleric acid

63920 000557-59-5-lignocerová acid;

tetrakosanová acid

64015 000060-33-3 linoleic acid;

(Z, Z)-9.12-dienoic octa-

acid

64150 028290-79-1, linolenic acid;

(9Z, 12Z, 15Z)-9.12,,

15-trienová acid

64500-lysine, salts

64640 001309-42-8 magnesium hydroxide

64720 001309-48-4 magnesium oxide

64800 00110-16-7-maleinová acid; SML(t) = 30 mg/kg (4)

(Z)-butenedioic acid

65020 006915-15-7 Apple acid;

hydroxybutandiová acid

65040 000141-82-2, malonová acid;

propanedioic acid

65520 000087-78-5 mannitol

65920 66822-60-4 1-[N-

methakryloyloxyethyl-N, N-

dimethyl-N-carboxymethyl-

ammonium chloride-oktadecyl-

methacrylate-

ethylmethakrylát-

cyklohexyl methacrylate-N-

Vinyl-2-pyrrolidon,

copolymers

66200 037206-01-2 methylkarboxymethylcelulosa

66240 009004-67-5 methylcelulosa

66560 004066-02-8 2, 2 '-methylenebis (4-SML (T) = 3 mg/kg (6)

methyl-6-cyklohexylfenol)

66580 000077-62-3, 2 '-methylenebis [4-SML (T) = 3 mg/kg (6)

methyl-6-(1-

methylcyklohexyl) phenol]

66640 009004-59-5 methylethylcelulosa

66695-methylhydroxymethylcelulosa

66700 009004-65-3 methylhydroxypropylcelulosa

66755 002682-20-4, 2-methyl-4-isothiazolin-SML = ND

3-he (DL = 0.02 mg/kg, including

uncertainty of measurement)

67120 012001-26-2 MICA

67170-a mixture of (80 to 100% w/w) 5.7-SML = 5 mg/kg

di-tert-butyl-3-(3,4-

dimethyfenyl)-2 (3 h)-

benzofuranonu and (0 to 20%

materials.) 5.7-di-tert-butyl-3-

(2.3-di-methylfenyl)-2

(3 h)-benzofuranonu

67180-a mixture of (50% w/w) n-decyl-n-SML = 5 mg/kg (1)

Octyl phthalate, (25% w/w)

di-n-decyl phthalate and

(25%) di-n-Octyl-

phthalate free

67200 001317-33-5 molybdeničitý sulfide

67840-montanové acid and/or

their esters with

ethylene glycol and/or

butane-1.3-propanediol and/or

1,2,3-propanetriol

67850 008002-53-7 montanový wax

67891 000544-63-8-myristová acid;

tetradekanová acid

68040 003333-62-8 7-[2 h-nafto-(1,2-D)

triazol-2-yl]-3-

fenylkumarin;

3-phenyl-7-(2 h-naphthol

[1.2-d] triazol-2-yl)

coumarin

68125 037244-96-5 nefelinsyenit

68145 080410-33-9-2, 2 ', 2 ''-nitrilo [triethyl-SML = 5 mg/kg (sum of fosfitů

Tri (3,3 ', 5,5 '-tetra-tert-and phosphate)

Butyl-1, 1 '-biphenyl-2, 2 '-6)

fosfit]; 6.6 ', 6 '-

(nitrilotriethylen) tris

(2, 4, 8, 10-tetra-tert-

butyldibenzol [d, f] [1,3]

dioxafosfepin

68960 000301-02-0 oleamid

69040 000112-80-1 oleic acid;

(z)-9-enová acid

69670 000143-28-2 oleylalkohol

70000 070331-94-1, 2 '-oxamidosib [ethyl-

3-(3,5-di-tert-butyl-4-

hydroxyphenyl)-propanoát]

70240 012198-93-5 ozokerit

70400 000057-Palmitic acid, 10-3;

hexadekanová acid

71020 000373-49-9-palmitolejová acid

71440 009000-69-5 pectin

000115 71600-77-5 of pentaerythritol

71635 025151-96-6 2.2-bis (hydroxymethyl) SML = 0.05 mg/kg. Must not be

propane-1.3-diol-di ((z)-used in plymerech in

9-butenoate); contact with food for

(pentaerythritol-dioleát) which is the annex No. 4 set

simulant D.

71670 178671-58-4 pentaerytritol tetrakis SML = 0.05 mg/kg

(2-3.3-kyano-difenylakrylát)

71680 006683-19-8 pentaerythritol tetrakis SML = 0.05 mg/kg

[3-(3,5-di-tert-butyl-4-

hydroxyphenyl)-propanoát]

71720 000109-66-0 pentane

72640 007664-38-2 phosphoric acid

73160-mono-and di-n-alkyl (C16 and SML = 0.05 mg/kg

C18) esters

phosphoric acid

73720 000115-96-8 (trichlorethyl)-phosphate SML = ND (DL = 0.02 mg/kg,

including measurement uncertainty)

74010 145650-60-8 bis (2,4-di-tert-butyl-6-SML = 5 mg/kg (sum of fosfitů and

methylfenyl-fosfit) ethyl phosphate)

74240 031570-04-4 of the tris (2,4-di-tert-butylfenyl)-

fosfit

74480 000088-99-3-ftalová acid

76320 000085-44-9 phthalic anhydride

76721-00-6 009016 polydimethylsiloxane in accordance with specifications

063148-62-9 (Mw > 6 800) set out in Appendix II

76730-polydimethylsiloxane, SML = 6 mg/kg

gamma-hydroxypropylovaný

76865-polyester propane-1.2-SML = 30 mg/kg

diol and/or butane-1.3-diol

and/or butane-1.4-diol and/or

polypropylenglykolu with

adipovou acid, also

topped by acetic acid

or fatty acids

C10-C18 or octane-1-OL

and/or Dean-1-OL

76960 025322-68-3 polyethylene glycol

77600 061788-85-0, polyethylene glycol ester

with hydrogenated

Castor oil

77702-esters with polyethylene glycol

aliphatic monokarboxylovými

acids (C6-C22) and their

ammonium and sodium sulphates

77895 068439-49-6 polyethylene glycol ether SML = 0.05 mg/kg

(EO = 2-6) and monoalkylu

(C16-C18)

79040 009005-64-5 sorbitan-monolaurát

polyethylene glycol

009005 79120-65-6 sorbitan monooleate

polyethylene glycol

79200 009005-66-7, sorbitan-monopalmitát

polyethylenglycolu

79280 009005-67-8 sorbitan-monostearát

polyethylene glycol

79360 009005-70-3 sorbitan trioleate-

polyethylene glycol

79440 009005-71-4 sorbitan-tristearát

polyethylene glycol

80240 029894-35-7 ricinoleát homopolymer

80640-polyoxyalkyl (C2-C4)

dimethylpolysiloxan
80720 008017-16-1, polyfosforečné acid

80800 025322-69-4 polypropylene glycol

81220 192268-64-7 polyl [[6-[N-(2, 2, 6, and 6-SML = 5 mg/kg

tetramethylpiperidin-

4-yl)-n-butylamino]-1,3, 5-

triazin-2.4-diyl] [2, 2, 6, 6

tetramethylpiperidin-4-

YL) Abdurrahman] hexane-1.6-4

[(2, 2, 6, and 6-tetramethylpiperidin

-4-yl) Abdurrahman]]-Alpha-

[N, N, N ', N '-tetrabutyl-

N '-(2, 2, 6, 6

tetramethylpiperidin-4-

Benzoic ylamino)] [1, 3, 5-triazin-

2, 4, and 6-triamino-]-w-N, N, N ', N '-

tetrabutyl-1, 3,5-triazin-

2.4-diamine

81515 087189-25-1, polyglycerolát, zinc;

Zinc salt, homopolymer

81520 007758-02-3 potassium bromide

81600 001310-58-3 potassium hydroxide

81760-powders, flakes and fibres of SML (T) = 30 mg/kg (7)

brass, bronze, copper, (expressed as copper)

stainless steel cínua SML = 48 mg/kg (expressed as

alloys of copper, Tin and iron as iron)

81840 000057-55-6 propane-1.2-diol

81882 000067-63-0 propan-2-ol

82000 000079-09-4 propanoic acid;

also named propionic acid

82080 009005-37-2 1.2-alginate

propylene glycol

82240 022788-19-8 dilaurát 1.2-

propylene glycol

82400 000105-62-4 1.2-dioleát

propylene glycol

82560 033587-20-1 1.2-dipalmitát

propylene glycol

82720 006182-11-2 1.2-distearát

propylene glycol

82800 027194-74-7 1.2-monolaurát

propylene glycol

82960 001330-80-9 1.2-monooleát

propylene glycol

029013-83120 28-3 1.2-monopalmitát

propylene glycol

83300-001323 39-3 1.2-monostearát

propylene glycol

propylhydroxymethylcelulosa-83320

83325-propylhydroxymethylcelulosa

83330-propylhydroxypropylcelulosa

83440 002466-09-3 difosforečná acid

83455 013445-56-2-difosforitá acid

83460 012269-78-2 pyrofylit

83470 014808-60-7 quartz

83599 68442-12-6 reaction products of 2-SML(t) = 0.18 mg/kg (16)

sulfonylethyl-oleátus (expressed as Tin)

Dichloro-dimethylcínem,

sulfidem sodium and

trichlormethylcínem

073138 83610-82-6 resin kyselinya

Rosin acids

83840 008050-09-7 Rosin

84000 008050-31-5 of the ester of rosin with

1,2,3-propanetriol

84080 008050-26-8 ester of rosin with

pentaerythritol

84210 065997-06-0 Rosin, hydrotreated

84240 065997-13-9 Rosin, hydrotreated;

ester with 1,2,3-propanetriol

84320 008050-15-5 Rosin, hydrotreated;

ester with methanol

84400 064365-17-9 Rosin, hydrotreated;

ester with pentaerythritol

84560 009006-04-6 rubber, natural

84640 000069-72-7 salicylic acid

85360 000109-43-3, dibutyl dekandioát

85600-silicates, natural

85610-silicates, natural,

silanized (except asbestos)

85680 01343-98-2 silicic acid

85840 053320-86-8 lithium-sodium-silicate SML(t) = 0.6 mg/kg (8)

magnesium (expressed as lithium)

86000-silicic acid,

silylovaná

86160 000409-21-2 silicon carbide

86240 007631-86-9 silica

86285-silica,

silanizovaný

86560 007647-15-6 sodium bromide

86720 001310-73-2 sodium hydroxide

87040 001330-43-4 disodium tetraborate SML(t) = 6 mg/kg (23)

(expressed as boron) without

prejudice to the provisions of the

the legislation, which

lays down the requirements for the

drinking water

87200 000110-44-1, acid sorbic acid;

Hexa-2,4, dienoic

87280 029116-98-1-sorbitan dioleát

87520 062568-11-0 sorbitan-monobehenát

87600 001338-39-2 sorbitan-monolaurát

87680 001338-43-8 sorbitan monooleate

87760 026266-57-9 sorbitan-monopalmitát

87840 001338-41-6 sorbitan-monostearát

87920 061752-68-9 sorbitan-tetrastearát

88080 026266-58-0 sorbitan trioleate-

88160 054140-20-4 sorbitan-tripalmitát

88240 026658-19-5 sorbitan-tristearát

88320 000050-70-4, sorbitol

88600 026836-47-5 monostearát sorbitol

88640 008013-07-8 soybean oil, in accordance with the specifications

oxidised in Appendix II

88800 009005-25-8 starch, edible

88880 068412-29-3, starch, hydrolyzed

88960 000124-26-5 stearamid

89040 000057-11-4 stearic acid;

oktadekanová acid

89200 007617-31-4 copper stearate SML(t) = 30 mg/kg (7)

expressed as copper

89440-esters of stearic SML(t) = 30 mg/kg (3)

with ethylenklykolem

90720 058446-52-9 stearoylbenzoylmethan

90800 005793-94-2-stearoyl 2-milk

acid, calcium salt

90960 000110-15-6 amber acid

91200 000126-13-6-isobutanoát acetate

sucrose

91360 000126-14-7 oktaacetát sucrose

91840 007704-34-9 sulfur

91920 007664-93-9 sulfuric acid

92030 010124-44-4 copper sulfate SML(t) = 30 mg/kg (7)

(expressed as copper)

92080 014807-96-6 of talc

92150 01401-55-4 of tannin acid in accordance with specifications

JECFA

92160 000087-69-4 wine acid

92195-TAURINE, salts

92205 057569-40-1, 2 '-methylenebis

(4-methyl-6-tert-

diester butylfenol)

Terephthalic acid

92350 000112-60-7 tetraethylyenglykol

92640 000102-60-3, N, N, N ', N '-tetrakis (2-

hydroxypropyl)

ethylenediamine

92700 078301-43-6, 2, 2, 4, and 4-tetramethyl-SML = 5 mg/kg

20 (2,3-epoxypropyl)-

7-oxa-3.20-diazadispirol

[5.1.11.2]-heneikosan-

21-on polymer

120218 92930-34-0 thiodiethylenbis (5-SML = 6 mg/kg

methoxykarbonyl-2.6-

dimethyl-1.4-dihydropyridine-

3-cell

93440 013463-67-7 Titanium dioxide

93520 000059-02-9, alpha-tocopherol

010191-41-0

93680 009000-65-1 rubber tragant

93720 00108-78-1, 2, 4, and 6-triamino-1,3,5-SML = 30 mg/kg

triazin

94320 000112-27-6 triethylene glycol

94960 000077-99-6, 2-ethyl-2-SML = 6 mg/kg

hydroxymethyl)-

1.3-diol

95200 001709-70-2 1, 3, 5-trimethyl-2-

TRIS (3,5-di-tert-butyl-4-

hydroxybenzyl) benzene

95270 161717-32-4-2, 4-6, tris (tert-butyl) SML = 2 mg/kg (as the sum

phenyl-2-butyl-2-fosfitu, phosphate and product

ethylpropan-1.3-diol-phosphate hydrolysis = TTBP)

95725 110638-71-6, vermiculite, reaction product SML(t) = 0.6 mg/kg (8)

with lithium citrate expressed j ako lithium

95855 007732-18-5 water in accordance with the law,

which lays down requirements for the

drinking water

95859-waxes, refined, obtained in accordance with the specifications
of oil or synthetic listed in Appendix II.

hydrocarbons

95883-White mineral oils, in accordance with the specifications

paraffinic, získanéz referred to in Appendix II.

of petroleum hydrocarbons

013983-17-95905 0 wollastonit

95920-wood flour and fibers

the unmodified

011138 95935-66-2 xanthanová gum

96190 020427-58-1 zinc hydroxide

96240 001314-13-2 zinc oxide

96320 001314-98-3 of the zinc sulfide

-----------------------------------------------------------------------------------------------------------------------



SECTION B

-----------------------------------------------------------------------------------------------------------------------

REF No. CAS number Name restrictions and/or specifications

(1) (2) (3) (4)

-----------------------------------------------------------------------------------------------------------------------

30180-18 002180-9 acetate manganese SML(t) = 0.6 mg/kg (10)

(expressed as manganese)

31520 061167-58-6, 2-tert-butyl-6-(3-SML = 6 mg/kg

tert-butyl-2-hydroxy-

5-4-methylbenzyl)-

methylfenyl-acrylic

31920 000103-23-1, bis (2-ethylhexyl)-SML = 18 mg/kg (1)

hexandioát;

bis (2-ethylhexyl)-

adipát

34230-alkyl (C8-C22) sulphonic SML = 6 mg/kg

35760 001309-64-4 carbon antimonitý SML = 0.02 mg/kg (expressed as

as antimony and including

uncertainty of measurement)

36720 017194-00-2 barium hydroxide SML(t) = 1 mg/kg (12)

(expressed as barium)

36800 010022-31-8 barium nitrate SML(t) = 1 mg/kg (12)

(expressed as barium)

38240 000119-61-9 is refluxed with SML = 0.6 mg/kg

38560 007128-64-5-2.5-bis (5-tert-butyl-SML = 0.6 mg/kg

2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene)

Thiophene

38700 063397-60-4, bis (2-karbobutoxyethyl) SML = 18 mg/kg

Tin-bis

(isooktylsulfanylacetát);

[bis (2-butoxykarbonyl)

ethyl] Tin-bis ({[6-

methylheptyl) oxy] Carbonyl}

methanthiolát)

38800 032637-78-8, N, N '-bis [3-(3,5-di-tert-SML = 15 mg/kg

Butyl-4-hydroxyphenyl)

Propionyl] hydrazid

38820 026741-53-7 bis (2,4-di-tert-butylfenyl)-SML = 0.6 mg/kg

pentaerythritol-difosfit;

3.9-bis (2,4-di-tert-

butylfenoxy) -2,4, 8.10-

tetraoxa-3.9-difosfaspiro

[5.5] undekan

39060 035958 30-6-1.1-bis (2-hydroxy-3.5-SML = 5 mg/kg

di-tert-butylfenyl)

Ethan

39090-N, N-bis (2-hydroxyethyl) SML(t) = 1.2 mg/kg (13)

alkyl (C8-C18) amin

39120-N, N-bis (2-hydroxyethyl) SML(t) = 1.2 mg/kg (13)

alkyl (C8-C18)-expressed as rerciální amin amin

hydrochloridy (expressed without HCI)

40000 000991-84-4-2.4-bis (oktylsulfanyl)-6-SML = 30 mg/kg

2.4-bis (okrylsulfanyl)-6-(4-SML = 30 mg/kg

hydroxy-3.5-di-tert-

butylanilino)-1,3, 5-triazin;

2-(3,5-di-tert-butyl-4-

hydroxyanililno)-4.6-

bis (okylsulfanyl)-1,3, 5-

triazin

40020-27 0110553-0 2.4-bis [(okylthio) methyl]-SML = 6 mg/kg

6-

40160 061269-61-2, N, N '-bis (2, 2, 6, 6

tetramethylpiperid-4-

hexamethylendiamin-YL)

1.2-dibromoethane, copolymer

40800 013003-12-8, 4 '-butylidenbis (6-tert-SML = 6 mg/kg

Butyl-3-

methylfenylditridecylfosfit)

40980 019664-95-0 butanová acid salt SML T = 0.6 mg/kg (10)

manganese (as manganese)

42000 063438-80-2 (2-karbobutoxyethyl) Tin-SML = 30 mg/kg

TRIS (isooktylsulfanylacetát);

[(2-butoxykarbonyl)

ethyl] tris [({isooktyl) oxy]

Carbonyl} methhyl) sulfanyl]

stannan

42400 010377-37-4 Lithium Carbonate SML(t) = 0.6 mg/kg (8)

(expressed as lithium)

42480 000584-09-8 rubidný carbonate SML = 12 mg/kg

43600 004080-31-3, 1-(3-chlorallyl) -3,5, 7-SML = 0.3 mg/kg

triaza-1-

azoniaadamantan-chloride

43680 000075-45-6 chlordifluormethan SML = 6 mg/kg. In accordance with the

specifications laid down

in annex II,

44960 011104-61-3 carbon kobaltitý SML(t) = 0.05 mg/kg (14)

(expressed as cobalt)

45440-styrenované butylované SML = 12 mg/kg

cresols

45650 006197-30-4-(2-ethylhexyl 2-cyan-SML = 0.05 mg/kg

3.3-difenylakrylát)

46720 004130-42-1, 2.6-di-tert-butyl-4-QMA = 4.8 mg/6 dm2

ethylfenol

47600 084030-61-5 di-n-dodecylcínbis SML = 12 mg/kg

(isooktylsulfanylacetát);

di-

dodecylcínbis ({[isooktyl)

Oxy] Carbonyl} m ethanthiolát)

000131 48640-56-6 2.4-dihydroxybenzofenon SML(t) = 6 mg/kg (15)



48800 000097-23-4 2, 2 '-dihydroxy-5, 5 '-SML = 12 mg/kg

dychlordifenylmethan

48880 000131-53-3, 2 '-dihydroxy-4-SML(t) = 6 mg/kg (15)

methoxybenzophenone

49600 026636-01-1 (isooktyl-dimethylcínbis SML(t) = 0.18 mg/kg (16)

sulfanylacetát); (expressed as Tin)

dimethhylbis [({[(2-

ethylhexyl) oxy] Carbonyl}

methhyl) sulfanyl] stannan

49840 002500-88-1 dioktadecyl-disulfide SML = 3 mg/kg

50160-di-n-oktylcínbis (n-SML(t) = 0.04 mg/kg (17)

alkyl (C10-C16) (expressed as Tin)

sulfanylacetát);

dioktylbis [({[(n-alkyl

(C10-C16) oxy]

Carbonyl) sulfanyl] methyl}

stannan

50240 010039-33-5 di-n-(2-oktylcínbis SML(t) = 0.04 mg/kg (17)

ethylhexyl-maleinát (expressed as Tin)

50320 015571-58-1 di-n-(2-oktylcínbis SML(t) = 0.04 mg/kg (17)

ethylhexyl-sulfanylacetát); (expressed as Tin)

dioktylbis [({[(2-

ethylhexyl) oxy] Carbonyl}

methyl) sulfanyl] stannan

50360-di-n-oktylcínbis (ethyl-SML(t) = 0.04 mg/kg (17)

maleinát) (expressed as Tin)

50400 033568-99-9 di-n-oktylcínbis (isooktyl-SML = 0.04 mg/kg (17)

maleinát) (expressed as Tin)

50480 026401-97-8 di-n-oktylcínbis SML(t) = 0.04 mg/kg (17)

(isooktylsulfanylacetát); (expressed as Tin)

dioktylbis [({[(isooktyl)

Oxy] methyl} Carbonyl)

sulfanyl] stannan

50560-di-n-oktylcínbutan-1.4-SML(t) = 0.04 mg/kg (17)

diol-bis (sulfanylacetát); (expressed as Tin)

[butane-1.4-diylbis

(oxykarbonylmethylen)

disulfanyl] dioktyl satannan

50640 003648-18-8 di-n-oktylcíndidodekanoát SML(t) = 0.04 mg/kg (17)

di-n-oktylcíndilaurát (expressed as Tin)

50720 015571-60-5 di-n-oktylcíndimaleinát SML(t) = 0.04 mg/kg (17)

(expressed as Tin)

50800-di-n-oktylcíndimaleinát, the SML(t) = 0.04 mg/kg (17)

esterified (expressed as Tin)

50880-di-n-oktylcíndimaleinát, the SML(t) = 0.04 mg/kg (17

polymers (n = 2-4) (expressed as Tin)

50960 069226-44-4 di-n-SML(t) = 0.04 mg/kg (17)
oktylcínethylenglykolbis (expressed as Tin)

(sulfanylacetát); [ethan-

1.2-diylbis

(oxykarbonylmethylen)

disulfanyl] dioktyl stannan

51040 015535-79-2 di-n-oktylcínsulfanylacetát SML(t) = 0.04 mg/kg (17)

(expressed as Tin)

51120-di-n-oktylcínthiobenzoát SML(t) = 0.04 mg/kg (17)

[(2-ethylhexyl)-(expressed as Tin)

sulfanylacetát]; dioktylcín-

(sulfanylbenzoát) ({[(2-

ethylhexyl) oxy] Carbonyl}

methanthiolát)

51570 000127-63-9 difenylsulfon SML = 3 mg/kg (25)

51680 000102-08-9 N, N '-difenylthiomočovina SML = 3 mg/kg

52000 027176-87-0 dodecylbenzensulfonová SML = 30 mg/kg

acid

52320 052047-59-3, 2-(4-dodecylfenyl) SML = 0.06 mg/kg

indole

52880 023676-09-7-ethyl-4-ethoxybenzoát SML = 3.6 mg/kg

53200 023949-66-8 2-ethoxy-2 '-ethyloxanilid SML = 30 mg/kg

58960 000057-09-0 hexadecyltrimethylamonium-SML = 6 mg/kg

bromide

59120 023128-74-7 N, N '-hexane-1.6-1,6-bis SML = 45 mg/kg

[3-(3,5-di-tert-butyl-4-

hydroxyphenyl) propanamid]

59200 035074-77-2 1.6-hexane-1,6-bis [3-(3,5-SML = 6 mg/kg

di-tert-butyl-4-

hydroxyphenyl) propanoát]

60320 070321-86-7-hydroxy-2-[3.5-bis (1,1-SML = 1.5 mg/kg

dimethhylbenzyl) phenyl]

benzotriazol

60400 003896-11-5, 2-(2 '-3 '-hydroxy-tert-SML (T) = 30 mg/kg (19)

Butyl-5 '-methylfenyl)-

5-chlorbenzotriazol

60800 065447-dimethyl ester [77-0 1-(2-SML = 30 mg/kg

hydroxyethhyl)-4-hydroxy-

2, 2, 6, 6

tetramethylpiperidin]-

sukcinátu, copolymer;

Poly (dimethyl-succinate-co-

4-hydroxy-2, 2-6, 6-

tetramethylpiperidin-1-

ethanol)

003293 61280-97-8 2-hydroxy-4-n-SML(t) = 6 mg/kg (15)

hexyloxybenzofenon

000131 61360-57-7, 2-hydroxy-4-SML(t) = 6 mg/kg (15)

methoxybenzophenone

61440 002440-22-4, 2-(2-hydroxy-5-methylfenyl) SML(t) = 30 mg/kg (19)

benzotriazol

61600 001843-05-6, 2-hydroxy-4-n-SML(t) = 6 mg/kg (15)

oktyloxybenzofenon

63200 051877-53-3 salt milk SML(t) = 0.6 mg/kg (10)

manganum-dilaktát acid (expressed as manganese)

64320 010377-51-2 lithium iodide SML(t) = 1 mg/kg (11)

(expressed as iodine) and

SML(t) = 0.6 mg/kg (8)

(expressed as lithhium)

65120 007772-01-5 manganese chloride SML(t) = 0.6 mg/kg (10)

(expressed as manganese)

65200 012626-88-9 manganese hydroxide SML(t) = 0.6 mg/kg (10)

(expressed as manganese)

65280 010043-84-2 manganese hypofosfit SML(t) = 0.6 mg/kg (10)

(expressed as manganese)

65360 011129-60-5 carbon manganese SML(t) = 0.6 mg/kg (10)

(expressed as manganese)

65440-dicalcium phosphate manganese SML(t) = 0.6 mg/kg (10)

(expressed as manganese)

66360 085209-91-2, 2 '-methylenebis (4,6-di-SML = 5 mg/kg

tert-butylfenyl)-sodium

phosphate

66400 000088-24-4, 2,2 '-methylenebis (4-ethyl-SML (T) = 1.5 mg/kg (20)

6-tert-butylfenol)

66480 000119-47-1, 2 '-methylenebis (4-methyl-SML (T) = 1.5 mg/kg (20)

6-tert-butylfenol)

67360 067649-65-4 mono-n-SML = 24 mg/kg

dodecylcíntris (isooktyl-

sulfanylacetát);

dodecyltris [({[(isooktyl)

Oxy] methyl} Carbonyl)

sulfanyl] stannan

67520 054849-38-6 (isooktyl-monomethylcíntris SML(t) = 0.18 mg/kg (16)

sulfanylacetát); (expressed as Tin)

[methyltris ({[(isooktyl)

Oxy] methyl} Carbonyl)

sulfanyl] stannan

67600-mono-n-oktylcíntris SML(t) = 1.2 mg/kg (18)

(alkyl (C10-C16) (expressed as Tin)

sulfanylacetát);

oktyltris [({[(alkyl

(C10-C16)) Oxy] Carbonyl}

methyl) sulfanyl] stannan

67680 027107-89-7 mono-n-(2-oktylcíntris SML(t) = 1.2 mg/kg (18)

ethylhexyl-sulfanylacetát); (expressed as Tin)

oktyltris [({[(2-ethylhexy)

Oxy] methyl} Carbonyl) sulfanyl]

stannan

67760 026401-86-5 mono-n-oktylcíntris (isooktyl-SML (T) = 1.2 mg/kg (18)

sulfanylacetát); (expressed as Tin)

oktyltris [({[(isooktyl) oxy]

Carbonyl}

68708 027253-31-2, neodekanová acid, salt SML(t) = 0.05 mg/kg (expressed as

Cobalt as neodekanová acid) and

SML(t) = 0.05 mg/kg (14)

(expressed as cobalt). The substance

may not be used in polymers

in contact with foodstuffs,

for which, according to annex No 4

This Decree provided for

application of simulant D

68320 002082-79-3, oktadecyl-3-(3,5-di-tert-SML = 6 mg/kg

Butyl-4-hydroxylfenyl)

propanoát

68400 010094-45-8 oktadecyl-(Z)-9-dokos-SML = 5 mg/kg

enamid oktadecylerukamid

68860 004724-48-5, n-oktylfosfonová acid SML = 0.05 mg/kg

69840 016260-09-6 N-(Z)-(z)-9-en-1-SML = 5 mg/kg

ylhexadekanamid

oleylpalmitamid

72160 000948-65-2, 2-fenylindol SML = 15 mg/kg

72800 001241-94-7-diphenyl-2-ethylhexyl-SML = 2.4 mg/kg

phosphate

73040 013763-32-1 phosphoric acid, the SML(t) = 0.6 mg/kg (8)

Lithium salts (expressed as lithium)

73120 010124-54-6 phosphoric acid, the SML(t) = 0.6 mg/kg (10)

manganese salts (expressed as manganese)

74400-tris (nonylfenyl) ester SML = 30 mg/kg

fosforité acid or

TRIS (dinonylfenyl) ester

fosforité acid

TRIS (nonyl-and/or

dinonylfenyl)-fosforitan

77440-polyethylene glycol-di SML = 42 mg/kg

(12-hydroxyoktadec-9-butenoate)

polyethylene glycol-diricinoleát

77520 061791-12-6 polyethylenglykolester SML = 42 mg/kg

Castor oil

78320 009004-97-1 of the polyethylene glycol-12-SML = 42 mg/kg

hydroxyoktadec-9-butenoate

polyethylene glycol-

monoricinoleát

81200-19 071878-8 poly (6-[1, 1, 3, and 3-SML = 3 mg/kg

tetramethylbutyl) amino]

1, 3, 5-triazin-2.4-diyl]-

[2, 2, 6, 6

tetramethylpiperid-4-yl)

Abdurrahman] hexamethylen [(2.2,

6.6-tetramethylpiperid-

4-yl) Abdurrahman]

81680-11 007681-0 potassium iodide SML(t) = 1 mg/kg (11)

(expressed as iodine)

82020 019019-51-3 kobaltnatá salt lay SML(t) = 0.05 mg/kg (14)

acids (expressed as cobalt)

83595 0119345-01-6 reaction product of di-tert-SML = 18 mg/kg, in accordance

butylfosfonitu with the bifenylem with the specifications

obtained by condensation of 2.4-di-in annex II

tert-butylfenolu with

products Friedelovy-Craftovy

the reaction of fosforitého chloride

and bifenylu

83700 000141-22-0 (Z)-9-12-hydroxyoktadec-SML = 42 mg/kg

enová ricinolejová acid

acid

84800 000087-6-3 4-tert-butylfenyl-SML = 12 mg/kg

salicylate
84880 000119-36-8-methyl-salicylate SML = 30 mg/kg

85760 012068-40-5 lithium silicate-SML(t) = 0.6 mg/kg (8)

aluminium (2:1: 1) (expressed as lithium)

85920 012627-14-4 lithium silicate SML(t) = 0.6 mg/kg (8)

(expressed as lithium)

86800 007681-82-5 sodium iodide SML(t) = 1 mg/kg (11)

(expressed as iodine)

86880-sodium monoalkyl-SML = 9 mg/kg

dialklfenoxybenzendisulfonát

89170 013586-84-0 oktadekanová acid, the SML(t) = 0.05 mg/kg (14)

kobaltnatá salt of stearic (expressed as cobalt)

acid, kobaltnatásůl

92000 007727-43-7 barium sulfate SML(t) = 1 mg/kg (12)

(expressed as barium)

92320-tetradecylpolyethylenglykol SML = 15 mg/kg

(EO = 3-8) ether glycollic acid

acid

92560 038613-77-3, tetrakis (2,4-di-tert-SML = 18 mg/kg

butylfenyl) biphenyl-4, 4 '-

ylen-difosfonit

92800 000096-69-5 '-thiobis (6-tert-butyl-SML = 0.48 mg/kg

3-)

92880 041484-35-9 thiodiethanolbis (3-(3,5-SML = 2.4 mg/kg

di-tert-butyl-4-

hydroxyphenyl) propanoát)

93120 000123-28-4, didodecyl-thiodipropanoát SML(t) = 5 mg/kg (21)

93280 000693-36-7 dioktadecyl-SML (T) = 5 mg/kg (21)

thiodipropanoát

000122 94560-20-3 triisopropanolamin SML = 5 mg/kg

040601 95280-76-1 1, 3, 5-tris (4-tert-butyl-SML = 6 mg/kg

3-hydroxy-2.6-

dimethylbenzyl)-1,3, 5-

triazin-2, 4,6 (1 h, 3 h, 5 h)-trion

95360 027676-62-6 1, 3, 5-tris (3,5-di-tert-SML = 5 mg/kg

Butyl-4-hydroxybenzyl)-

1, 1, 3, 5-triazin-2, 4,6-

(1 h, 3 h, 5 h)-trion

95600 001843-03-4 1 1 3-tris (2-methyl-4-SML = 5 mg/kg

hydroxy-5-tert-butylfenyl)

butane

95000-028931 67-1 poly [2,2-bis (hydroxymethyl)

Butan-1-ol-trimethakrylát]-

co-methyl-methacrylate



APPENDIX 1



PRODUCTS OBTAINED BY THE FERMENTATION OF BACTERIAL



-----------------------------------------------------------------------------------------------------------------------

REF no CAS number Name restrictions and/or specifications

-----------------------------------------------------------------------------------------------------------------------

(1) (2) (3) (4)

-----------------------------------------------------------------------------------------------------------------------

18888 80181-31-3, 3-hydroxybutanová acid and SML = 0.05 mg/kg for the (E)-

3-hydroxypentanová acid, 2-octadecenoic acid (such as

Copolymer of dirt), and in accordance with the

specifications laid down

in Appendix II to this annex.

-----------------------------------------------------------------------------------------------------------------------



APPENDIX II



SPECIFICATIONS



Part a: general specifications



Materials and products made using aromatic isocyanate

or dyes prepared by diazokopulací shall not release primary

aromatic amines (expressed as aniline) in the amount of stanovitelném

(DL = 0.02 mg/kg of food or food simulant, including

uncertainty of measurement). The value of the migration of the primary aromatic amines

referred to in this annex, this limit shall not apply.



-----------------------------------------------------------------------------------------------------------------------

REF no other specifications

-----------------------------------------------------------------------------------------------------------------------

16690 Divinylbenzen

Can contain up to 40% of the ethylvinylbenzenu.

18888 3-hydroxybutanová acid and 3-hydroxypentanová acid, copolymer



The definition of These copolymers are produced by the controlled fermentation of Alcaligenes eutrophus for bacteria

the use of mixtures of glucose and propanoic acid, jakozdrojů. Used body may not

be obtained through genetic modification and must come from one of the naturally vyskytujícícho

Alcaligenes eutrophus strain H16 NCIMB 10442. The stock culture of the organism is kept

in the lyophelised State in ampoules. Partial/working culture is prepared from the stock culture

kept in liquid nitrogen and used to seed the fermentation of propřípravu. Samples

from the fermenter with a daily viewing under a microscope, monitor any changes to the morphology of the

colonies on an agar different soils at different temperatures. Copolymers are isolated

from a heat-treated bacteria by controlled decomposition of other cellular components, by washing the

and drying. These copolymers are normally formed by melting of nabízenyjako or přetvarované

granules containing additives such as nucleating agents, plasticisers, fillers,

stabilizers and pigments, which comply with the specifications of the individual obecnýma.

-Chemical name Poly (3-D-hydroxybutanooát-co-3-D-hydroxypentanoát)

-CAS number 80181-31-3



Ch3

-Structural formula |

Ch3 CH2 Of A

| | | |

(-O-CH-CH3-C-) m-(O-CH-CH2-C-) n

--------------------------------

where n/(m + n) is greater than 0 and less than or equal to 0.25



-The average of at least 150 000 molecular (gel permeation chromatography method specified).

the weight of the

-The content of at least 98%

Poly (3-D-hydroxybutanoát-co-3-D-hydroxypentanoát), analysed after hydrolysis as a mixture of

acid 3-D-hydroxybutanové acid and 3-D-hydroxypentanové.



Description After the isolation of the white to creamy white powder



The properties of the

-Identification

tests:

-Solubility Soluble in chlorinated hydrocarbons such as chloroform or dichloromethane but

practically insoluble in ethanol, aliphatic alkanes and water.



The size of the migration-migrate-2-enové acid (krotonovékyseliny), shall not exceed 0.05 mg/kg

food.



-Purity before it must default the substance (powder copolymer) include:

-Nitrogen not more than 2 500 mg/kg of plastic

-Zinc not more than 100 mg/kg of plastic

-Copper not more than 5 mg/kg of plastic

-Lead not more than 2 mg/kg of plastic

-Arsenic not more than 1 mg/kg of plastic

-Chromium not more than 1 mg/kg of plastic



23547 polydimethylsiloxane (Mw > 6 800)

The minimum viscosity of 100x10-6 m 2 x-1 (= 100 centstokesů) at 25th. (C)



25385 triallylamin

40 mg/kg Hydrogel at a ratio of 1 kg of food to a maximum of 1.5 grams of Hydrogel. Use only in hydrogels

intended for indirect contact with food.



38320 4-(2-4-(2-benzoxazolyl)-4'-(5-methyl-2-benzoxazolyl)stilbene)-4 '-(5-methylbenzoxazolyl) stilben

Nejvyše 0.05% (m/m) (quantity/quantity of the product)



43680 Chlordifluormethan

CHLORODIFLUOROMETHANE content of less than 1 mg/kg of the substance



47210 Dibutylthiocíničitá acid, a polymer



-Molecular unit = (C8H18S3Sn2) (n = 1.5-2)



76721 Polydimethylsiloxane (Mw > 6 800)

The minimum viscosity of 100x10-6 m2 x-1 (= 100 centistokesů) at 25th. (C)



83595 reaction products of di-tert-butylfosfonitu with bifenylem derived condensation of 2.4-di-tert-butylfenolu products

Friedelovy-Crafts reaction of fosforitého chloride and bifenylu



The composition of the

-4,4 '-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS number 38613-77-3) (36-46% 1)

-4.3 '-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS number 118421-00-4) (17-23%.)

-3,3 '-bifenylenbsi [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS number 118421-01-5) (1-5%).

-4.0-bifenylenbis [0,0-bis (2,4-di-tert-butylfenyl) fosfonit]

(CAS number 91362-37-7) (17-19% by weight.)

-tris (2,4-di-tert-butylfenyl) fosfonit

(CAS number 31570-04-4) (9-18 weight%)

-4,4 '-bifenylenbis {[0,0-bis (2,4-di-tert-butylfenyl) fosfonit] [0.0-bis (2,4-di-tert-butylfenyl) (fosfonit]}

(CAS number 112949-97-0) (5% w/w

Related Laws