Advanced Search

Change Search. About Work Safety In Mining During The Work On The Surface Of The

Original Language Title: změna vyhl. o bezpečnosti práce v hornictví při práci na povrchu

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
142/2004 Sb.



DECREE



of 19 December 2003. March 2004,



amending Decree No. 26/1989 Coll., on safety and health

at work and the safety of operations in mining activities and in the activities

by using mining techniques on the surface, as amended



The Czech mining Office lays down pursuant to § 5 para. 3 and § 6 para. 6 (a). and)

Act No. 61/1988 Coll. on mining activities, explosives and the State

Mining Administration, as amended by Act No. 542/1991 Coll.:



Article. (I)



Decree No. 26/1989 Coll., on safety and health at work and the

traffic safety in mining activities and in the activities carried out by the

using mining techniques on the surface, as amended by Decree No. 340/1992 Coll.,

Decree No. 8/1994 Coll., Decree No. 236/1998 Coll. and Decree No. 434/2000

Coll., is amended as follows:



1. In article 1 (1). 1, after the word "establishes" the words "in accordance with the

the law of the European communities ^ 1a) ".



Footnote 1a) is inserted:



"1a) Council Directive 92/104/EEC on minimum requirements for improving the

safety and health protection of workers in surface and underground

the mining industry ".



2. In article 2 (2). 1 a) and (b)):



"and the burden of excessive weight of the subject), whose weight is greater than the

3000 kg,



(b)) the burden of excessive dimensions subject, transport or

handling spaces cannot be honored on the route laid down by this

by Decree, ".



3. In § 71 paragraph 2 reads as follows:



"(2) automatically or remotely controlled equipment shall be equipped with (i) manual

control of large machines, and it is sufficient to hand control of the basic

(main) movements of the giant machines. Manual control with automatic or

remote control of functions. In the place of a remotely controlled device

preventing unwanted blocking will ensure the device to

operation. If the change control settings rise threatening status

work safety and operation, prevents it by appropriate means by which

are usually an access code or a lockable control. ".



4. In § 89 paragraph 1. 4 (f)) repealed.



Letter g) is renumbered as paragraph (f)).



5. In paragraph 90, paragraph 1, including the footnote 32a) reads as follows:



"(1) the Organization shall determine for each operated a quarry with electrical equipment

to control the installation, operation and maintenance of electrical equipment the person who

In addition to qualification requirements, according to a special legal

^ Regulation 32a) for organizations dobývajících coal education

obtained master's degree program in the field of technical sciences and

technologies with a focus on electrical engineering and other organizations

at least the full secondary vocational education of Electrotechnical direction.



32a) § 9 para. 6 of Decree No. 75/2002 Coll. on road safety

electrical technical equipment used in mining activities and

activities carried out using mining techniques. ".



6. § 165 including title:



"§ 165



Transport of loads excessive weight or oversized loads



(1) the burden of excessive weight or burden of excessive dimensions

manually or skid and manipulation may work under the processed

operational documentation approved racing quarry only workers with at least

two years of experience in the transportation. The said means of transport may exercise

only in the presence of technical supervision.



(2) mechanical transport burden of excessive weight or burden of excessive

the dimensions specified in the transport regulations approved racing quarry may exercise

only workers with at least two years of experience in the transportation.



(3) prior to the handling and transport of the burden of excessive weight or burden

oversized employee view must specified a device designed to

handling and transport of the burden of excessive weight or burden of excessive

dimensions, whether it conforms to the operational documentation and is not damaged. The result of the

inspection records.



(4) prior to the transport of the burden of excessive weight or burden of excessive

the dimensions specified by the worker is obliged to perform the control direction

traffic routes. The result recorded.



(5) the documentation referred to in paragraph 1 and traffic regulations referred to in paragraph

2 must contain the conclusions of the assessment of the burden of excessive

the burden of excessive weight or size and elements of the infrastructure,

particularly in terms of load carrying capacity of the substrate used to transport as the transport

paths, bow traffic routes, the weights and dimensions of the load, stability

the burden of having regard to the position of its centre of gravity during transport, the assessment

the necessary bed area of means of transport and fastening of the load,

and to the extent, in order to avoid unwanted movement of the load,

its tilting or tipping over.



(6) where it is carried out by transport and manipulation with the burden of excessive

weight or burden of excessive dimensions, must not be carried on any

other activity. ".



Article II



This Decree shall enter into force on 1 January 2000. July 2004.



President:



Prof. JUDr. Ing. Makarius, CSc. v. r.