127/2009 Coll.
DECREE


Dated 5 May 2009

Amending Decree of the Ministry of Health no. 38/2001 Coll., On
hygiene requirements for products intended for contact with food and
dishes, as amended

Ministry of Health, pursuant to § 108 paragraph. 1 of Law no.
258/2000 Coll., On protection of public health and amending some
related laws, as amended, to implement § 26 paragraph
. 1 point. b) and d) of the Act:

Art. I

Decree no. 38/2001 Coll., On hygienic requirements on products intended
contact with food and meals, as amended by Decree no. 186/2003 Coll.
Decree no. 207/2006 Coll. , Decree no. 551/2006 Coll., Decree no. 271/2008 Coll
. and Decree no. 386/2008 Coll., is amended as follows:

First § 1, including footnotes Nos. 1 and 1a reads:

"§ 1

This Decree implements the relevant regulations of the European Communities ^ 1)
and adjusted in relation to the directly applicable regulations of the European Communities
^ 1) hygienic requirements for materials and articles intended
contact with food (hereinafter " products intended for contact with food
").

1) Council Directive 78/142 / EEC of 30 January 1978, which concerns the approximation
law of the Member States relating to materials that contain
vinyl chloride monomer and are intended for contact with food.

Commission Directive 80/766 / EEC of 18 July 1980, which establishes
method of analysis for the official control of the amount of vinyl chloride monomer
in materials and articles intended to come into contact with foodstuffs
.

Commission Directive 81/432 / EEC of 29 April 1981, which establishes
analytical method for the official control of vinyl chloride released
materials and articles into food.

Council Directive 82/711 / EEC of 18 October 1982, which establishes the basic
rules for migration testing components, plastics and articles thereof
manufactured and intended for contact with food.

Council Directive 84/500 / EEC of 15 October 1984 concerning the approximation
laws of the Member States relating to ceramic
articles intended for contact with food.

Council Directive 85/572 / EEC of 19 December 1985, which establishes a list
food simulants used for migration testing components
plastics and articles made therefrom and intended for contact with food.

Commission Directive 93/11 / EEC of 15 March 1993, which concerns the determination
N-nitrosamines and N-nitrosatable substances released from teats and teats
made of elastomer or rubber.

Commission Directive 97/48 / EC of 29 July 1997 amending for the second
Council Directive 82/711 / EEC laying down the basic rules
necessary for testing migration of the constituents of the materials and articles
plastics intended for food contact.

Commission Directive 2002/72 / EC of 6 August 2002 on materials and articles
plastics intended for food contact.

Commission Directive 2004/1 / EC of 6 January 2004 amending Directive
2002/72 / EC, to suspend the use of azodicarbonamide as blowing
plastics.

Commission Directive 2004/19 / EC of 1 March 2004, amending and supplementing
Directive 2002/72 / EC relating to materials and articles of plastics
intended for contact with food.

Commission Directive 2005/41 / EC of 29 April 2005 amending
Council Directive 84/500 / EEC as regards the declaration of compliance and implementation criteria
analytical method for ceramic articles intended to
contact with food.

Commission Directive 2005/79 / EC of 18 November 2005 amending
Directive 2002/72 / EC on materials and articles of plastics intended for food contact
.

Commission Directive 2007/19 / EC of 2 April 2007 amending
Directive 2002/72 / EC on materials and articles intended for plastic
contact with food and Council Directive 85/572 / EEC laying down the list
simulants to be used for testing migration of constituents of the materials and articles
plastic intended for contact with food.

Commission Directive 2007/42 / EC of 29 June 2007 on
materials and articles made of regenerated cellulose film intended for contact with food.

Commission Directive 2008/39 / EC of 6 March 2008 amending
Directive 2002/62 / EC on plastic materials intended for contact with food
.

1) Regulation of the European Parliament and Council Regulation (EC) no. 178/2002 of 28
January 2002 laying down the general principles and requirements of food

Law, establishing the European Food Safety Authority and laying down procedures
food safety.

Regulation of the European Parliament and Council Regulation (EC) no. 1935/2004 of 27
October 2004 on materials and articles intended to come into contact with food and
repealing Directive 80/590 / EEC and 89/109 / EEC.

Commission Regulation (EC) no. 1895/2005 of 18 November 2005 on the restriction
use of certain epoxy derivatives in materials and articles intended for contact with food
.

Commission Regulation (EC) no. 2023/2006 of 22 December 2006 on good
manufacturing practice for materials and articles intended for contact with food.

Commission Regulation (EC) no. 282/2008 of 27 March 2008 on materials and articles
recycled plastics intended for food contact and
amending Regulation (EC) no. 2023/2006.

Regulation of the European Parliament and Council Regulation (EC) no. 882/2004 of 29 April
2004 on official controls to ensure verification of compliance with laws and regulations
with feed and food law, animal health and || | welfare. ".

Second In § 2 paragraph 32, including footnote no. 1b reads:

"32nd plastic functional barrier, a barrier consisting of one or more
layers of plastics which ensures that the finished product complies with the requirements of this Decree
and directly applicable European Community
^ 1b)

1b) Article 3 of the European Parliament and Council Regulation (EC) no. 1935/2004. ".

Third § 3, including footnotes. 1c and 1d reads:

"§ 3

Requirements on the composition of products intended for contact with food

(1) Products intended for contact with food must meet
directly applicable European Community ^ 1b)
hygiene requirements and limitations set out in this notice and the kind of product requirements to protect human health
against risks that might arise through oral contact with
products according to the requirements set out in § 15 point. ) and
Annex no. 9.

(2) Hygiene requirements and limits for products intended for contact with food
must be verified under the conditions and rules laid down by this Decree and
directly applicable European Communities ^
1c).

(3) In the manufacture of products intended for contact with food
may be used only natural materials such as cork or wood
non-toxic trees, without defects, bark and resin release with
smooth nepopraskaným surface. These materials may not show signs
by pests or microorganisms, especially microscopic filamentous fungi
.

(4) Materials and articles of plastics, paints, coatings and products
covered by surface coatings, and adhesives that contain, or are
made from one or more of the following

) 2,2-bis [4- (2,3-epoxypropoxy) phenyl] propane, and some of its derivatives,

B) bis (2,3-epoxypropyl) ether, bis (hydroxyphenyl) methane, and some of their derivatives
,

C) novolac ethers and some of their derivatives must meet the requirements
directly applicable European Community ^ 1d).

(5) The requirements set out in paragraph 4 shall not apply to containers and
storage tanks having a capacity greater than 10,000 liters, as well as their
pipe and connected with them, which is regulated by heavy-duty || | coating.

1c) of the European Parliament and Council Regulation (EC) no. 882/2004.

1d) Commission Regulation (EC) no. 1895/2005 of 18 November 2005
restriction of use of certain epoxy derivatives in materials and articles
intended for contact with food. ".

Fourth In § 4 para. 1 the words "used a validated analytical methods
" the words "meeting the requirements of the directly applicable legal
European Communities ^ 1c) or".

Fifth § 8 and 9 are deleted.

6th In § 10 paragraph 4 and 5, including footnotes Nos. 2 and 2a shall be added:

"(4) The migration of the substances pursuant to paragraph 3. b) into food or food simulant
provided a method of analysis complying with the requirements
directly applicable European Community ^ 2)
not exceed 0.01 mg / kg. This limit shall always be expressed as
concentration in foods or simulants. Shall apply to
group of compounds which are structurally and toxicologically related, in particular
isomers or compounds with the same functional group, and includes possible
off transfer.


(5) The substance listed in paragraph 3. b) shall not belong to either one of these categories
:

) Substances classified as substances for which evidence is or is deemed
that the substances are carcinogenic, mutagenic or toxic for reproduction
by special legislation 2a) or

B) substances classified under the self-responsibility criteria as
carcinogenic, mutagenic or toxic for reproduction
under a special legal regulation 2a).

2) Article 11 of the European Parliament and Council Regulation (EC) no. 882/2004.

2a) Act no. 356/2003 Coll., On chemical substances and
preparations and amending certain laws, as amended. ".

7th In § 11, Subsection 2, including footnote no. 2b reads:

"(2) General specifications related to plastic products and materials
are set out in Appendix II of Annex no. 3. More specifications
relating to certain substances included in the positive list of Annex No.
. 3 are set out in Appendix II to Part B of this Annex. Particulars
declaration of conformity 2b), which connects to materials and articles
plastics, are set forth in Annex no. 3 hereto.

2b) Article 16 of the European Parliament and Council Regulation (EC) no. 1935/2004
. ".

8th In § 11a paragraph 1, first including footnote no. 3 reads:

(1) If the production of plastic products intended for contact with food
used additives which are authorized as food
additives or flavorings food
by special legislation, 3) not these substances are released into
food

3) Act no. 110/1997 Coll., On foodstuffs and tobacco products and
amending and supplementing some related laws, as amended
regulations.

Decree no. 4/2008 Coll., Laying down the types and conditions of substances and additives
extraction solvents in food production.

Decree no. 447/2004 Coll., On requirements for the amount and types of substances
food flavorings, conditions for their use, requirements for
their safety and conditions for the use of quinine and caffeine. ".

9th Annex no. 3 reads:

"Annex no. 3 to Decree no. 38/2001 Coll

Requirements for plastics and plastic products

LIST monomers INGREDIENTS AND OTHER STARTING SUBSTANCES WHICH MAY BE USED FOR
manufacture of plastics

First This appendix contains a list of monomers and other starting ingredients
substances that may be used in the manufacture of plastics and plastic products,
intended for contact with food. The list includes:

1.1 substances undergoing polymerisation, which includes
polyaddition or any other similar process
macromolecules;

1.2 natural or synthetic macromolecular substances used
manufacture of modified macromolecules, if the monomers or other starting substances
necessary for their production not included in the list;

1.3 substances used to modify existing natural or synthetic substances
;

1.4 substances that are added to plastics to achieve a technical effect
in the final product, including the polymer additives. These substances are
intended to be contained in the final products, while
polymeric additives for the purposes of this Annex shall mean all
polymers, prepolymers and oligomers, that can be added to plastics in order
achieve a technical effect which can not be used without
other polymers as the main structural component of finished materials and products
;

1.5 substances that are used to create an environment in which
polymerization occurs (for example, emulsifiers, surfactants, buffers
). For the purposes of this Annex, the substances referred to in paragraphs 1.4 and 1.5
hereinafter referred to as additives.

Second The list does not include the following substances although they are used
intentionally and are authorized:

A) the salts of aluminum, calcium, iron, magnesium, potassium and sodium and ammonium salts
(including double salts and acid salts) authorized acids, phenols or alcohols
. The name "salt" is listed only if
the corresponding free acid is not listed (not shown in the list
).

B) a zinc salt (including double salts and acid salts)
authorized acids, phenols or alcohols. For these salts a group

Specific migration limit SML = 25 mg / kg (expressed as Zn).
The same restriction for Zn applies to:

I) substances whose name contains 'salts' are listed
only if the corresponding free acid is not listed
(not listed).

Ii) substances referred to in note 38 of Appendix III
.

Third The list does not include the following substances although they may be present
:

B) substances that may be present in the final product:

- Impurities in the substances;

- Reaction intermediates;

- Decomposition products;

C) oligomers and natural or synthetic macromolecular substances and their
mixtures, if the monomers or starting substances required to synthesise
included in the list;

D) mixtures of the authorized substances;

E) substances which directly influence the formation of polymers (eg.
Catalytic systems);

F) dyes;

G) solvent.

Products that contain the substances referred to in subparagraphs a) to c)
must meet the requirements provided for in § 3. 1st

Fourth Substance shall have a good technical quality as regards the purity criteria
.

First Food contact can only use products obtained by bacterial fermentation
in Appendix I to this Annex.

Second The list contains the following information:

- Column 1 (PM / REF no.) Reference number of the EEC packaging material
substances on the list;

- Column 2 (CAS) CAS Registry Number (Chemical Abstracts Service
);

- Column 3 (Name): the chemical name;

- Column 4 (Restrictions and / or specifications): May contain

- Specific migration limit (SML)

- Maximum permitted quantity of the substance in the finished material or article
(QM)

- Maximum permitted quantity of the substance in the finished material or article
expressed as mg per 6 dm2 of the surface in contact with foodstuffs (QMA)

- Any other restriction specifically mentioned,

- Any type of specifications related to the substance or polymer.

Third If a substance is listed individually, are also
a generic term, is subject to the restrictions mentioned this at
individually listed substances.

Fourth If a CAS number does not match the chemical name, the chemical name
precedence over the CAS number. If a CAS number EINECS
by the registry does not match the CAS Registry, the CAS number is valid according to the register
CAS.

Fifth In the tables, in the column 4 are used abbreviations and terms having the following meanings
:

DL = detection limit of the analytical method;

FP = Finished material or article;

NCO = isocyanates;

ND = not be detected. For the purposes of this decree means that the substance can not be detected
validated analytical method specified
limit of quantification (DL). If such a method does not currently exist
, proceed to the development of validated methods
procedure under § 4 paragraph 1 of the Decree.

QM = maximum permitted quantity of the residual substance in the material or product
.

For the purposes of this Decree, the amount of the substance in the material or product
provides validated analytical method. If such a method does
currently exist, it proceeds to the development of validated methods
procedure under § 4 paragraph 1.

QM (T) = maximum permitted quantity of the residual substance in the material or product
expressed as total of moiety or substance.
For the purposes of this Order, the amount of substance in the material or article should be determined
validated analytical method. If such a method
currently exist, it proceeds to the development of validated methods
procedure under § 4 paragraph 1.

QMA = Maximum permitted quantity of the residual substance in the material or
article expressed as mg per 6 dm2 of the surface in contact with foodstuffs.

QMA (T) = maximum permitted quantity of the residual substance in the material or product
expressed as total of moiety or substance in
mg per 6 dm2 of the surface in contact with foodstuffs. For the purposes of this decree would
quantity of the substance in the material or article should be determined
validated analytical method. If such a method does not currently exist
proceed to the development of validated methods of procedure in accordance with § 4, paragraph 1
.

SML = specific migration limit in food or in food simulant
, unless otherwise stated. For the purposes of this decree should

Be the value of the specific migration of substances from the material or product set
validated analytical method. If such a method does not currently exist
, proceed to the development of validated methods
procedure under § 4 paragraph 1.

SML (T) = specific migration limit in food or in food simulant
expressed as total of substances or groups of substances
. For the purposes of this Decree, the value of the specific migration of the substance or group of substances
material or product, determined by validated analytical method
. If such a method does not currently exist
progresses until the development of validated methods of procedure in accordance with § 4 paragraph 1.

LIST OF ALLOWED MONOMERS AND OTHER STARTING SUBSTANCES


SECTION A
------------------------- -------------------- ------------- ----------------------------------
PM / REF CAS No Name Restrictions and / or specifications
no.
------------------------- ---------------------- ---------------------------------- -----------
(1) (2) (3) (4)
------------------------- ---------- ----------------------- --------------------------- -------
10030 000514-10-3 abietic acid
10060 000075-07-0 acetaldehyde SML (T) = 6 mg / kg (2)
10090 000064-19-7 acetic acid
10120 000108-05-4 vinyl acetate SML = 12 mg / kg 10150 000108-24-7 acetic anhydride

10210 000074-86-2 acetylene
10599 / 90A 061788-89-4 fatty acids, unsaturated (C18) QMA (T) = 0.05 mg / 6 dm2 (27)
dimers, distilled 10599/91 061788-89-4
fatty acids, unsaturated (C18) QMA (T) = 0.05 mg / 6 dm2 (27)
dimers, undistilled
10599 / 92A 068783-41-5 fatty acids, unsaturated (C18) QMA (T) = 0.05 mg / 6 dm2 (27)
dimers, hydrogenated, distilled 10599/93 068783-41-5
fatty acids, unsaturated (C18) QMA (T) = 0.05 mg / 6 dm2 (27)
dimers, hydrogenated,
undistilled
10630 000079-06-1 acrylamide SML = ND (DL = 0,01 mg / kg)
10660 015214-89-8 2-acrylamido-2- SML = 0.05 mg / kg
methylpropanesulphonic acid
10690 000079-10-7 acrylic acid SML (T) = 6 mg / kg (36)
10750 002495-35-4 benzyl acrylate SML (T) = 6 mg / kg (36) | || 10780 000141-32-2 n-butyl acrylate SML (T) = 6 mg / kg (36)
10810 002998-08-5 sec-butyl acrylate SML (T) = 6 mg / kg (36 )
10840 001663-39-4 tert-butyl acrylate SML (T) = 6 mg / kg (36)
11005 012542-30-2 dicyklopentenyl acrylate QMA = 0.05 mg / dm2 6 || | 11245 002156-97-0 dodecyl acrylate SML = 0.05 mg / kg (1)
11470 000140-88-5 ethyl acrylate SML (T) = 6 mg / kg (36) 11 500 000 103
-11-7 2-ethylhexyl acrylate SML = 0.05 mg / kg 11510 000818-61-1
hydroxyethyl acrylate see. monoester of acrylic acid
ethylene glycol
11530 000999-61-1 2-hydroxypropyl acrylate QMA = 0.05 mg / dm2 for the sum of 6 2-
hydroxypropyl acrylate and 2-
hydroxyisopropyl acrylate
in accordance with the specifications
set out in Appendix II to this
Annex.
11590 00106-63-8 isobutyl acrylate SML (T) = 6 mg / kg (36)
11680 000689-12-3 isopropyl acrylate SML (T) = 6 mg / kg (36) || | 11710 000096-33-3 methyl acrylate SML (T) = 6 mg / kg (36)
11830 000818-61-1 monoester of acrylic acid SML (T) = 6 mg / kg (36)
ethylene glycol
11890 002499-59-4 n-octyl acrylate SML (T) = 6 mg / kg (36)
11980 000925-60-0 propyl acrylate SML (T) = 6 mg / kg ( 36)
12100 000107-13-1 acrylonitrile SML = ND
(DL = 0.020 mg / kg, including the uncertainty of measurement
)
12130 000124-04-9 Adipic acid
12265 004074-90-2 divinyl adipate QM = 5 mg / kg in FP. To use
only as a comonomer.

12280 002035-75-8 adipanhydrid 12310 1st - 2nd albumin
12340 - albumin coagulated by formaldehyde 12375
3rd - alcohols, aliphatic, with one
OH, saturated, linear,
primary (C4-C22)
12670 002855-13-2 1-amino-3,5,5-3aminomethyl SML = 6 mg / kg
trimethylcyclohexane
12761 000693-57-2 12-aminododecanoic acid SML = 0.05 mg / kg
12763 00141-43-5 2-aminoethanol SML = 0.05 mg / kg.Látka not be
used in polymers contacting

food for which to be
Annex No. 4 to this Decree is used
simulant D látkasmí be used
only nepřímýstyk
Food, separate layer
PET
12765 84434-12-8 N- (2-aminoethyl) -N-alanine, sodium SML = 0.05 mg / kg
Salt
12786 000919-30-2 3-aminopropyltriethoxysilane Residual extractable content of 3-
aminopropyltriethoxysilane be
lower than 3 mg / kgplniva.
using only reactive
Surface úpravuanorganických
fillers and SML = 0,05 mg / kg when
used for the surface treatment
materials and products.
12788 002432-99-7 11-aminoundecanoic acid SML = 5 mg / kg 12789 007664-41-7 ammonia

12820 000123-99-9 azelaic acid
nonanedioic acid 12970 004196-95-6 azelanhydrid

anhydrite nonanedioic acid
13000 001477-55-0 1,3-benzenedimethanamine SML = 0.05 mg / kg
1,3-bis (aminomethyl) benzene
13060 004422-95-1 1,3,5- trichloride QMA = 0.05 mg / 6 dm2 (measured as
benzenetricarboxylic acid, 1,3,5-benzenetricarboxylic | || benzene 1,3,5-tri (carbonyl) acid)
13075 000091-76-9 benzoguanamine viz.2,4-diamino-6-phenyl-1,3,5
triazine
13090 000065-85-0 Benzoic acid
13150 000100-51-6 000498-66-8 13180
benzyl bicyclo [2.2.1] hept-2-ene (= SML = 0,05 mg / kg
norbornene)
13210 001761-71-3 bis (4-aminocyclohexyl) methane SML = 0.05 mg / kg
13317 132459-54-2 N, N'-bis [4- (ethoxycarbonyl) phenyl] - SML = 0,05 mg / kg.Čistota higher than
1,4,5,8-naftalenetetrakarboxy- 98.1% (w / w). For use as
diimide comonomer (max 4%) for polyesters
(PET, PBT)
13323 000102-40-9 1,3-bis (2-hydroxyethoxy) benzene SML = 0.05 mg / kg 13326 000111-46-6
bis (2-hydroxyethyl) ether, see diethylene
13380 000077-99-6 2,2-bis (hydroxymethyl) butan-1-ol; refer to 1,1,1-trimethylolpropane
2-ethyl-2- (hydroxymethyl) propane
1,3-diol
13390 000105-08-8 1,4-bis (hydroxymethyl) cyclohexane
13395 04767-03-7 2,2-bis (hydroxymethyl) propanoic QMA = 0.05 mg / dm2 6
acid
13480 000080-05-7 2,2-bis (4-hydroxyphenyl) propane SML (T) = 0.6 mg / kg (28)
4,4 '- (propane-2,2-diyl) diphenol
bisphenol A
13510 001675-54-3 2,2-bis (4-hydroxyphenyl) propane According to the requirements of the directly applicable
bis (2,3-epoxypropyl) ether rule předpisuEvropských
(= BADGE); Community 1b)
2,2-bis [4- (2,3
epoxypropoxy) phenyl] propane
13530 038103-06-9 2,2-bis (4-hydroxyphenyl) propane SML = 0.05 mg / kg
bis (phthalic anhydride)
13550 000110-98-5 bis (hydroxypropyl) ether, dipropylene see
13560 005124-30-1 bis (4-isocyanatocyclohexyl) -methane see. dicyclohexylmethane-4,4'
diisocyanate
13600 047465-97-4 3,3-bis (3-methyl-4-hydroxyfenyl- SML = 1.8 mg / kg
indoline-2-13607 000080-05-7 bisphenol
A viz.13480
2,2-bis (4-hydroxyphenyl) propane

13610 001675-54-3 bisphenol A bis (2,3 see. 13510
epoxypropyl) ether of 2,2-bis (4-hydroxyphenyl) propane
(= BADGE) bis (2,3-epoxypropyl) ether
13614 038103-06-9 bisphenol A bis (phthalic anhydride) viz.13530
13617 00080-09-1 bisphenol S see. 4,4'-dihydroxydiphenyl
13620 010043-35-3 boric acid SML (T) = 6 mg / kg (23) (
expressed as boron) without prejudice to the provisions
,
indicators regarding the quality of drinking water in accordance with a special legislative

13630 000106-99-0 butadiene QM = 1 mg / kg in FP or SML =
ND (DL = 0.02 mg / kg including uncertainty
measurement)
13690 000107-88-0 butane-1,3-diol
13720 000110-63-4 butane-1,4-diol SML (T) = 0.05 mg / kg (24)
13780 002425-79-8 1,4-butanediol bis (2,3-QM = 1 mg / kg in FP (expressed as

epoxypropyl) ether; epoxy group, molecular weight
1,4-bis (2,3-epoxypropoxy) butane = 43)
13810 00505-65-7 butane-1,4-diolformal; QMA = 0.05 mg / dm2 6
1,3-dioxepane
13840 000071-36-3 butan-1-ol
13870 000106-98-9 1-butene
13900 000107-01-7 but-2-ene
13932 00598-32-3 but-3-en-2-ol QMA = ND (DL = 0,02mg / 6dm2).
When used as a copolymer for
preparing a polymerization ingredients
14020 000098-54-4 4-tert-butylphenol SML = 0.05 mg / kg 14110 000123-72-8
butyraldehyde;
butanoaldehyde
14140 000107-92-6 butyric acid;
butanoic acid
14170 000106-31-0 anhydride butyric acid;
butananhydrid
14200 000105-60-2 caprolactam; SML (T) = 15 mg / kg (5)
hexane-6-lactam
14230 002123-24-2 caprolactam, sodium salt; SML (T) = 15 mg / kg (5)
hexane-6-lactam, sodium salt (expressed as caprolactam)
14260 000502-44-3 caprolactone SML = 0.05 mg / kg
(Expressed as the sum of caprolactone and 6-hydroxyhexanovékyseliny
)
14320 000124-07-2 caprylic acid;
octanoic acid 14350 000630-08-0

CO 14380 000075-44-5 carbonyl QM = 1 mg / kg in FP 14411 008001-79-4

14500 castor oil 009004-34- 6 cellulose
14530 007782-50-5 000106-89-8 chloro
14570 1-chloro-2,3-epoxypropane see epichlorohydrin
14650 000079-38-9 chlortrifluorethen QMA = 0.05 mg / kg
14680 000077-92-9 citric acid
14710 000108-39-4 m-cresol
14740 000095-48-7 o-cresol
14770 00106-44-5 p-cresol
14800 003724-65-0 crotonic acid; QMA (T) = 0.05 mg / 6 dm2 (33)
(E) -but-2-enoic acid
14841 000599-64-4 4- (1-phenyl-1-methylethyl) phenol SML = 0.05 mg / kg
4-cumylphenol
14880 000105-08-8 1,4-cyclohexanedimethanol, see 1,4-bis (hydroxymethyl)
cyclohexane
14950 003173-53-3 cyclohexyl isocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
15030 00931-88-4 cyclooctene SML = 0.05 mg /kg.Látka may be
used in polymers contacting
Food, for which, according
Annex no. 4 hereto
A determined použitísimulantu
15070 001647-16-1 deca-1,9-diene SML = 0.05 mg / kg 15095 000334-48-5

decanoic acid 15100 000112-30-1 decan-1 ol
15130 000872-05-9 dec-1-ene SML = 0.05 mg / kg
15250 000110-60-1 1,4-diaminobutane
15267 000080-08-0 bis (4 aminophenyl) sulfone SML = 5 mg / kg
15272 000107-15-3 1,2-diaminoethane see ethylenediamine
15274 000124-09-4 1,6-diaminohexane see hexamethylenediamine
15310 000091-76- 9 2,4-diamino-6-phenyl-1,3,5-triazine; QMA = 5 mg / dm2 6
6-phenyl-1,3,5-triazine-2,4-diamine
15404 000652-67-5 1,4: 3,6-dianhydro-D-glucitol SML = 5 mg / kg. Only for use as
monomer in poly (ethylene terephthalate-co
-isosorbid-
terephthalate).
15565 000106-46-7 1,4-dichlorobenzene SML = 12 mg / kg
15610 00080-07-9 4,4-dichlordifenylsulfon SML = 0.05 mg / kg
15700 005124-30 -1 dicyclohexylmethane-4,4'-QM (T) = 1 mg / kg (VFP expressed
diisocyanate; as NCO) (26)
bis (4-isocyanatocyclohexyl) methane;
4,4'
metiylendiciklohexyil
15760 000111-46-6 bis (2-hydroxyethyl) ether; SML (T) = 30 mg / kg (3)
diethylene
15790 000111-40-0 diethylene SML = 5 mg / kg
15820 000345-92-6 4,4-difluoro SML = 0.05 mg / kg 15880 000120-80-9 1
, 2-dihydroxybenzene; SML = 6 mg / kg
benzene-1,2-diol
15910 000108-46-3 1,3-dihydroxybenzene; SML = 2.4 mg / kg
benzene-1,3-diol
15940 000123-31-9 1,4-dihydroxybenzene; SML = 0.6 mg / kg
benzene-1,4-diol
15970 000611-99-4 4,4'-dihydroxybenzophenone SML (T) = 6 mg / kg (15)
16000 000092-88-6 4,4'-dihydroxydiphenyl SML = 6 mg / kg
16090 00080-09-1 4,4'-dihydroxydiphenyl; SML = 0.05 mg / kg
4,4'-sulfonyl
16150 000108-01-0 2- (dimethylamino) ethanol SML = 18 mg / kg
Fourth 006864- 3,3'-dimethyl-4,4'-SML = 0.05 mg / kg (32)

16210 37-5 diaminodicyclohexylmethane; Only for použitív polyamides
4,4'-methylenebis (2-
methylcyclohexane-1-amine)
16240 000091-97-4 3,3'-dimethyl-4,4'-QM (T) = 1 mg / kg (VFP expressed
-diisocyanato; as NCO) (26)
4,4'methylenbis (2-
phenyl) diisocyanate;
bis (4-isocyanato-3-
methylphenyl) methane
16360 000576-26-1 2,6-dimethylphenol SML = 0.05 mg / kg
16390 00126-30-7 2,2-dimethylpropane -1,3-diol; SML = 0.05 mg / kg
neopentyl
16450 000646-06-0 1,3-dioxolane SML = 5 mg / kg 16480 000126-58-9 dipentaerythritol

16540 000102-09-0 diphenyl carbonate SML = 0,05 mg /
kg 16570 004128-73-8 diphenylether-4,4'-diisocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26) 16600 005873-54-1 diphenylmethane
2,4'-diisocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
16630 000101-68-8 diphenylmethane-4,4'-diisocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
16650 000127-63-9 diphenylsulfone SML (T) = 3 mg / kg (25)
16660 000110-98-5 dipropylene
16690 001321-74-0 divinylbenzene QMA = 0.01 mg / 6 dm2 or SML = ND
(DL = 0.02 mg / kg, including uncertainty
measurements) for the sum of divinylbenzene and
ethylvinylbenzenua in accordance with
specifications set out in Appendix
II of this Annex.
16694 013811-50-2 N, N'-divinylimidazolidin-2-one QM = 5 mg / kg in FP 16697 000693-23-2
dodecanedioic acid
16704 000112-41-4 dodec-1 ene SML = 0.05 mg / kg 16750 000106-89-8
epichlorohydrin QM = 1 mg / kg in FP 16780 000064-17-5 ethanol

16950 000074-85-1 ethylene;
ethene
16955 000096-49-1 ethylene carbonate Residual content = 5 mg / kg of hydrogel
at a maximum ratio of 10 g of hydrogel
1 kg potravin.Hydrolyzát
It contains ethylene glycol and SML = 30
mg / kg
16960 000107-15-3 Ethylenediamine SML = 12 mg / kg 16990 000107-21-1
ethane-1,2-diol; SML (T) = 30 mg / kg (3)
ethylene
17005 000151-56-4 ethylenimine SML = ND (DL = 0.01 mg / kg)
17020 000075-21-8 ethylene QM = 1 mg / kg in FP 17050
000104-76- 7 2-ethylhexane-1-ol SML = 30 mg / kg
016219-75-3 5-ethylidenbicyklo [2.2.1] hept-2-ene QMA = 0.05 mg / dm2
6 17 110 The ratio between the surface area and
the quantity of food must be less
2 dm2 / kg
17160 000097-53-0 eugenol; SML = ND (DL = 0.02 mg / kg, including
2-methoxy-4- (propen-2-yl) phenol) measurement uncertainty)
17170 061788-47-4 fatty acids, coconut || | 17200 068308-53-2 fatty acids, soya
17230 061790-12-3 fatty acids, tall oil
17260 000050-00-0 formaldehyde SML (T) = 15 mg / kg (22)
17290 000110-17-8 fumaric acid 17530 000050-99-7 glucose

18010 000110-94-1 glutaric acid 18070 000108-55-4 glutaric anhydride

18100 000056-81-5 glycerol | || 18220 068564-88-5 N-heptylaminoundekanová acid SML = 0.05 mg / kg (1) 18250 000115-28-6
hexachlorendomethylentetrahydro- SML = ND (DL = 0.01 mg / kg)
phthalic acid;
1,4,5,6,7,7-
hexachlorbicyklo [2.2.1] hept-5-ene
2,3-dicarboxylic acid
18280 000115-27-5 hexachlorendomethylentetrahydro- SML = ND (DL = 0.01 mg / kg)
phthalic anhydride;
anhydride 1,4,5,6,7,7-
hexachlorbicyklo [2.2.1] hept-5-ene
2,3-dicarboxylic acid
18310 036653-82-4 hexadecane-1-ol
18430 000116-15-4 hexafluoropropylene SML = ND (DL = 0.01 mg / kg)
18460 000124-09 -4 hexamethylenediamine SML = 2.4 mg / kg 18640 000822-06-0
hexamethylene diisocyanate; QM (T) = 1 mg / kg (VFP expressed
hexane-1,6-diyldiisokyanát; as NCO) (26)
1,6-diisocyanatohexane
18670 000100-97-0 hexamethylenetetramine SML (T) = 15 mg / kg (22)
(Expressed as formaldehyde)
000629-11-8 hexane-1,6-diol SML = 0.05 mg / kg

18700 18820 000592-41-6 hex-1-ene SML = 3 mg / kg
18867 000123- 31-9 hydroquinone; see 1,4dihydroxybenzen
benzene-1,4-diol

18880 000099-96-7 p-hydroxybenzoic acid;
4-hydroxybenzoic acid
18896 001679-51-2 4- (hydroxymethyl) cyclohex-1-ene SML = 0.05 mg / kg
18897 016712-64-4 6-hydroxynaphthalene-2-carboxylic SML = 0 , 05 mg / kg
acid
18898 000103-90-2 N- (4-hydroxyphenyl) acetamide SML = 0.05 mg / kg 19000 000115-11-7 isobutene

19060 000109-53-5 isobutyl (vinyl) ether QM = 5 mg / kg in FP
19110 04098-71-9 [3- (isocyanatomethyl) -3,5,5- QM (T) = 1 mg / kg in FP (expressed as
trimethylcyclohexyl] isocyanate NCO )) (26)
19150 000121-91-5 benzene-1,3-dicarboxylic acid; SML (T) = 5 mg / kg (43)
isophthalic acid
19180 000099-63-8 isoftaloyldochlorid SML (T) = 5 mg / kg (43) (expressed
as isophthalic acid).
19210 001459-93-4 dimethyl isophthalate SML = 0.05 mg / kg
19243 00078-79-5 isoprene see. 2-methylbut-1,3-diene
19270 000097-65-4 itaconic acid;
prop-2-ene-1,2-dicarboxylic

acid, lactic acid 19460 000050-21-5
19470 000143-07-7 lauric acid;
dodecanoic acid
19480 002146-71-6 vinyl laurate;
vinyl dodecanoate
19490 00947-04-6 laurolactam; SML = 5 mg / kg
dodecane-12-lactam
19510 011132-73-3 000110-16-7 19540 lignocellulose
maleic acid; SML (T) = 30 mg / kg (4)
(Z) -butenedioic acid
19960 000108-31-6 maleic SML (T) = 30 mg / kg (4) (expressed
as maleic acid)
19975 000108-78-1 melamine; see. 2,4,6-triamino-1,3,5-triazine
1,3,5-triazine-2,4,6-triamine
19990 000079-39-0 methacrylamide SML = ND
(DL = 0.02 mg / kg, including the uncertainty of measurement
)
20020 000079-41-4 methacrylic acid SML (T) = 6 mg / kg (37)
20050 000096-05-9 allyl methacrylate SML = 0.05 mg / kg 20080 002495-37-6
benzyl methacrylate SML (T) = 6 mg / kg (37)
20110 000097-88-1 butyl methacrylate SML (T) = 6 mg / kg (37)
20140 002998-18-7 sec-butyl methacrylate SML (T) = 6 mg / kg (37)
20170 000585-07-9 tert-butyl methacrylate SML ( T) = 6 mg / kg (37)
20260 00101-43-9 cyclohexyl methacrylate SML = 0.05 mg / kg
20410 02082-81-7 diester of methacrylic acid SML = 0.05 mg / kg
with butane-1,4-diol
20440 000097-90-5 diester of methacrylic acid with SML = 0.05 mg / kg
ethylene glycol
20530 002867-47-2 2- (dimethylamino) ethyl methacrylate SML = ND
(DL = 0.02 mg / kg, including the uncertainty of measurement
)
20590 00106-91-2 2,3-epoxypropyl methacrylate QMA = 0,02mg / 6 dm2 20890 000097-63-2
ethyl methacrylate SML (T) = 6 mg / kg (37)
21010 000097-86-9 isobutyl methacrylate SML (T) = 6 mg / kg (37)
21100 004655-34-9 isopropyl- methacrylate SML (T) = 6 mg / kg (37)
21130 000080-62-6 methyl methacrylate SML (T) = 6 mg / kg (37)
21190 000868-77-9 monoester of methacrylic acid SML (T) = 6 mg / kg (37)
ethylene glycol
21280 002177-70-0 phenyl methacrylate SML (T) = 6 mg / kg (37)
21340 002210-28-8 propyl methacrylate SML (T) = 6 mg / kg (37)
010595-80-9 2-sulfoethyl methacrylate QMA =
ND 21370 (DL = 0,02mg / 6 dm2)
054276-35-6 sulfopropyl methacrylate QMA = 0.05 mg / dm2 6

21400 21460 000760-93-0 methakrylanhydrid SML (T) = 6 mg / kg (37)
21490 000126-98 -7 methacrylonitrile SML = ND
(DL = 0.02 mg / kg, including uncertainty of measurement
)
21520 01561-92-8 sodium methallylsulfonát SML = 5 mg / kg 21550 000067-56-1 methanol

21640 00078 -79-5 2-methylbut-1,3-diene QM = 1mg / kg in FP or SML = ND
(DL = 0.02 mg / kg, including the uncertainty of measurement
)
21730 000563-45-1 3-methylbut-1-ene QMA = 0,006 mg / 6 dm2. Only for
use in polypropylene.
21765 106246-33-7 4,4'-methylenebis (3-chloro-2,6 QMA = 0.05 mg / dm2 6
diethylaniline)
21821 00505-65-7 1.4 - (methylenedioxy) butane-1,4-viz.butan diolformal
000924-42-5 21940 N-methylolacrylamide SML = ND (DL = 0.01 mg / kg)
21970 000923-02-4 N- (hydroxymethyl) methacrylamide SML = 0.05 mg / kg
22150 000691-37-2 4- (methylthio) pent-1-ene SML = 0.05 mg / kg 22210 000098-83-9
alpha- methylstyrene SML = 0.05 mg / kg

22331 025513-64-8 mixture (35-45% wt.) 1,6-diamino QMA = 5 mg / dm2 6
2,2,4trimethylhexanu and (55-65%
weight) of 1,6-diamino-2,4,4-
trimethyl
22332 028679-16-5 mixture (40 wt.%) 2,2,4- QM (T) = 1 mg / kg (VFP expressed
trimethylhexane and 1,6 as NCO) (26)
diyldiisokyanátu (60%) 2,4,4-
trimethyl-1,6
diyldiisokyanátu
22350 000544-63-8 myristic acid;
tetradecanoic acid
22360 01141-38-4 naphthalene-2,6-dicarboxylic acid SML = 5 mg / kg
acid
22390 000840-65-3 dimethyl-2,6-naphthalenedicarboxylate SML = 0.05 mg / kg
22420 003173-72-6 1,5-naphthalene diisocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
22437 00126-30-7 neopentylglycol see. 2,2-dimethyl-propane-1,3-diol
22450 009004-70-0 000143-08-8 nitrocellulose
22480 nonane-1-ol
22550 000498-66-8 norbornene See. bicyclo [2.2.1] hept-2-ene
22570 000112-96-9 oktadecylisokyanát; QM (T) = 1 mg / kg (VFP expressed
1-isokyanatooktadekan as NCO) (26)
22600 000111-87-5 octan-1-ol
22660 000111-66-0 oct-1 -en SML = 15 mg / kg 22763 000112-80-1
oleic acid
22775 000144-62-7 oxalic acid SML (T) = 6 mg / kg (29)
22778 07456-68- 0 4,4'-oxybis (benzensulfonylazid) QMA = 0.05 mg / dm2 6
22780 000057-10-3 palmitic acid;
hexadecanoic acid
22840 000115-77-5 Pentaerythritol
22870 000071-41-0 pentan-1-ol 00109-67-1
22900 pent-1-ene SML = 5 mg / kg
22932 001187-93-5 perfluormethylperfluorvinylether SML = 0.05 mg / kg K use only
non-stick surfaces.
22937 001623-05-8 perfluorpropyl (perfluorvinyl) ether SML = 0.05 mg / kg 22960 000108-95-2 phenol

23050 000108-45-2 1,3-phenylenediamine SML = ND ( DL = 0,02mg / kg
including measurement uncertainty)
23070 000102-39-6 (1.3-phenylenedioxy) diacetic QMA = 0.05 mg / 6 dm2
acid
23155 000075-44-5 phosgene see carbonyl
23170 007664-38-2 phosphoric acid
23175 000122-52-1 triethyl phosphite QM = ND (DL = 1 mg / kg in PBS) | || 23187 - phthalic acid, terephthalic acid see
23200 000088-99-3 o-phthalic acid
23230 000131-17-9 diallyl phthalate SML = ND (DL = 0.01 mg / kg)
23380 000085-44-9 phthalic anhydride
23470 000080-56-8 alpha-pinene
23500 000127-91-3 beta-pinene
23547 009016-00-6 polydimethylsiloxane (molecular to the specifications
063148-62-9 weight greater than 6800) set out in Appendix II to this Annex

23590 025322-68-3 polyethylene glycol 23650 025322-69-4 polypropylene (molecular weight greater than
400)
23651 025322-69-4 000057-55-6 polypropylene
23740 propane-1,2-diol
23770 000504-63-2 propane-1,3-diol SML = 0.05 mg / kg
23800 000071-23-8 propan-1-ol
23830 000067-63-0 propan-2-ol
23860 000123-38-6 propionaldehyde;
propanaldehyd
23890 000079-09-4 propionic acid
23920 000105-38-4 vinyl propanoate SML (T) = 6 mg / kg (2)
(Expressed as acetaldehyde) 23950 000123-62-6 propionic

23980 000115-07-1 propylene;

24010 000075-56-9 propylene, propylene oxide QM = 1 mg / kg in FP 24051 000120-80-9
pyrocatechol; see 1.2 dihydroxybenzen
benzene-1,2-diol
24057 000089-32-7 pyromellitanhydrid SML = 0,05 mg / kg (expressed as
pyromellitic acid)
24070 073138-82-6 resin acids and rosin
acid
24072 000108-46-3 resorcinol see 1,3dihydroxybenzen
24073 000101-90-6 resorcinol (diglycidyl) ether QMA = 0,005 mg / 6 dm2. Substance not
be used in polymers contacting
Food, for which, according
Annex No. 4 to this Decree
provided použitísimulantu D
the substance can only be used for
indirect food contact,
separate PET layer 24100 008050-09-7 Rosin

24130 008050-09-7 rosin see.
24160 008052-10-6 Rosin tall oil rosin
24190 009014-63-5 wood rosin
24250 009006-04-6 rubber, natural

24270 000069-72-7 salicylic acid;
2-hydroxybenzoic acid
24280 000111-20-6 sebacic acid;
dodecanedioic acid
24430 002561-88-8 sebakanhydrid;
decanedioic acid anhydride
24475 001313-82-2 Sodium sulfide

sorbitol 000050-70-4 24490 24520 008001-22-7 soybean oil
24540 009005-25-8 starch, food
24550 000057-11-4 stearic acid;
octadecanoic acid 24610 000100-42-5 styrene

24760 026914-43-2 styrene sulfonic acid SML = 0.05 mg / kg 24820 000110-15-6

succinic acid 24850 000108-30- 5 succinic anhydride
24880 000057-50-1 046728-75-0 24886 sucrose
monolithium-5-sulfoisophthalate SML = 5 mg / kg and for lithium SML (T)
= 0.6 mg / kg (8) expressed as

24887 006362-79-4 lithium 5-sulfoisophthalic acid SML = 5 mg / kg
monosodium salt
24888 003965-55-7 dimethyl 5-sulphoisoftalové SML = 0.05 mg / kg
acid, monosodium salt
24903 068425-17-2 Syrups, hydrolysed starch, in accordance with the specifications
hydrogenated set out in Appendix II to this
Annex
24910 000100-21-0 Terephthalic acid SML = 7.5 mg / kg 24940 000100-20-9
dichloride of terephthalic acid SML (T) = 7.5 mg / kg (expressed as terephthalic
acid)
24970 000120-61-6 dimethyl terephthalate
25080 001120-36-1 tetradec-1-ene SML = 0.05 mg / kg 25090 000112-60-7 tetraethyleneglycol

25120 000116-14-3 tetrafluoroethylene SML = 0.05 mg / kg 25150 000109-99-9
tetrahydrofuran SML = 0.6 mg / kg
25180 000102-60-3 N, N, N ', N' tetrakis (2-hydroxypropyl
)
ethylenediamine
25210 000584-84-9 2,4-toluene diisocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
25240 000091-08-7 2,6 -toluene diisocyanate QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
25270 026747-90-0 2,4-toluene diisocyanate, dimer QM (T) = 1 mg / kg (VFP
expressed as NCO) (26)
25360 - 2,3-epoxypropyl-trialkyl (C5-C15) QM = 1 mg / kg in FP (expressed as
acetate epoxy group, molecular
weight = 43)
25380 - vinyl-trialkyl (C7-C17) acetates QMA = 0.05 mg / dm2 6
(= Vinyl versatate)
25385 000102-70-5 triallylamine In accordance with the specifications
set out in Appendix II to this
Annex.
25420 000108-78-1 2,4,6-triamino-1,3,5-triazine SML = 30 mg / kg
25450 26896-48-0 tricyklodekandimethanol SML = 0.05 mg / kg || | 25510 000112-27-6 000528-44-9 triethylene
25540 trimellitic acid SML (T) = 5 mg / kg (35)
25550 000552-30-7 trimelitanhydrid SML (T) = 5 mg / kg (35) (expressed as trimellitic acid
)
25600 000077-99-6 1,1,1-trimethylolpropane; SML = 6 mg / kg
2-ethyl-2 (hydroxymethyl) propane-1,3-
diol
25840 003290-92-4 2,2-bis (methakryloxymethyl) -but-yl- SML = 0.05 mg / kg
methacrylate
25900 00110-88-3 trioxane SML = 5 mg / kg 25910 024800-44-0 tripropylene

25927 027955-94-8 1,1,1-tris (4-hydroxyphenyl) ethane QM = 0.5 mg / kg in FP. Only for
use in polycarbonates.

25960 000057-13-6 urea vinyl chloride 26050 000075-01-4 see.
requirements of this Decree 26110 000075-35-4 vinylidene QM = 5 mg / kg in FP or
SML = ND
(DL = 0.05 mg / kg)
26140 000075-38-7 vinylidene fluoride SML = 5 mg / kg
26155 001072-63-5 1-vinylimidazole QM = 5 mg / kg in FP || | 26170 003195-78-6 N-vinyl-N-methylacetamide QM = 2 mg / kg in FP 26305 000078-08-0
triethoxy (vinyl) silane SML = 0.05 mg / kg.K use only
as a surface treating agent.
26320 002768-02-7 vinyltrimethoxysilane QM = 5 mg / kg in FP 26360 007732-18-5 Water
In accordance with a special legal
regulations establishing requirements
for drinking water.
------------------------- ---------------------- ---------------------------------- -----------

SECTION B
LIST OF MONOMERS AND OTHER STARTING SUBSTANCES
WHICH MAY BE USED

Pending a decision on inclusion in Section A
------------------------- -------------- ------------------- ------------------------------- ---
PM / REF CAS No name Restrictions and / or specifications
no.
------------------------- ---------------------- ---------------------------------- -----------
(1) (2) (3) (4)
------------------------- ---------- ----------------------- --------------------------- -------
13050 00528-44-9 1,2,4-benzenetricarboxylic acid see trimellitic acid

dicyclopentadiene 00077-73-6 15730 18370 000592-45-0 hexa-1, 4-diene

26230 000088-12-0 vinylpyrrolidone ------------------------- --------- ------------------------ -------------------------- --------


INCOMPLETE LIST OF ADDITIVES WHICH MAY BE USED
For plastics
SECTION A
------------------------- -------------------- ------------- ----------------------------------
PM / REF CAS No name Restrictions and / or specifications
no.
------------------------- -------------------- ------------- ----------------------------------
(1) (2) (3) (4)
------------------------- ---------- ----------------------- --------------------------- -------
30000 000064-19-7 acetic acid
30045 000123-86-4 butyl acetate
30080 004180-12-5 acetic cuprous salt SML (T) = 5 mg / kg (7)
(Expressed jakoměď)
30140 000141-78-6 ethyl acetate, acetic anhydride 000108-24-7 30,280


acetone 000067-64-1 30,295 30,370 - acetyloctová acid salt
30401 - acetylated mono- and diglycerides of fatty

acids 30 610 - C2-C24 aliphatic linear monocarboxylic
acids of natural oils and fats and
mono-, di- and triglycerides (including
branched fatty acids as
naturally occur in nature)
30612 - synthetic C2-C24, aliphatic, linear,
monocarboxylic acids and their mono-, di-

30960 and triglycerides - fatty esters, mono-
acids (C6-C22) polyglycerol
31328 - fatty acids from animal or
vegetable fats and oils
31530 123968-25-2 2,4-di-tert-pentyl-6- [1- (3,5-di-tert-pentyl-SML = 5 mg / kg 2-hydroxyphenyl
) ethyl] phenyl acrylate
31542 174254-23-0 methyl acrylate, telomer with 1- QM = 0.5% (w / w) in FP
dodekaneethiolem, C16-C18 alkyl
31730 000124-04-9 Adipic acid
33120 - alcohols, aliphatic, with one group
OH, saturated, linear, primary (C4-C24)
33350 009005-32-7 alginic acid
33801 - n-alkyl (C10-C13) benzenesulfonic acid SML = 30 mg / kg
34240 - esters alkyl (C10-C20) sulfonic acid SML = 6 mg / kg
phenols
34281 - alkyl sulfate acids (C8-C22) linear,
primary with an even number of carbon atoms
34475 - phosphite hydroxide, aluminum-calcium

hydrate 34480 - Aluminium fibers, flakes and powders
34560 021645-51-2 aluminum hydroxide
34690 011097-59-9 hydroxide-magnesium carbonate, aluminum
34720 001344-28-1 alumina | || 34850 143925-92-2 oxidised QM = dialkylminy technically use only:
hydrogenated and) in polyolefins
in an amount do0,1% (wt.)
but not VLDPE which is
intended for contact
foods for which
by přílohyč. 4 of this
Decree provides that the
reduction factor less than 3;
b) in PET in a quantity of 0.25 to
% (Wt.), Which is designed
food contact
except for that
According to Annex no. 4 to this
Decree determined using
simulant D.
34895 000088-68-6 2-aminobenzamide SML = 0.05 mg / kg
The substance can only be used
PET, which is designed for
Relations pitnouvodou and
beverages.
35120 013560-49-1 thiobis (2-hydroxyethyl) diester

3-aminocrotonate
35160 06642-31-5 6-amino-1,3-dimethyluracil SML = 5 mg / kg
35170 00141-43-5 2-aminoethanol SML = 0.05 mg / kg. Substance not
vpolymerech be used in
contact with foods for which
According to Annex no. 4 to this
Decree determined using
simulant D; the substance can be
pouzepro used indirect
contact with food, separated
from food
PET layer 35284 00111-41-1 N- (2-hydroxyethyl) ethane-1,2-diamine SML = 0.05 mg / kg. Substance not
vpolymerech be used in
contact with foods for which
According to Annex no. 4 to this
Decree determined using
simulant D; the substance can be
pouzepro used indirect
contact with food, separated
Food from PET layer 35320 007664-41-7 ammonia

35440 012124-97-9 ammonium bromide
35600 001336-21-6 ammonium hydroxide
35840 000506-30-9 arachidonic acid
35845 007771-44-0
arachidonic acid, ascorbic acid 36000 000050-81-7 000137-66-6 36,080
ascorbyl palmitate;
ascorbyl hexadecanoate
36160 010605-09-1 ascorbyl stearate
36840 012007-55-5 Barium tetraborate SML (T) = 1 mg / kg (12)
(Expressed as barium) and
SML (T) = 6 mg / kg (23)
(Expressed as Boron) without
the separate legal
regulation laying down
requirements for drinking water.
36880 008012-89-3 beeswax

behenamide 003061-75-4 36960 37040 000112-85-6 behenic acid 37280 001302-78-9 bentonite

37360 000100-52- 7 benzaldehyde In accordance with footnote (9)
Appendix IIItéto Annex. 37600 000065-85-0

benzoic acid 37680 000136-60-7 butyl benzoate
37840 000093-89-0 ethyl-benzoate
38080 000093-58-3 methyl benzoate
38160 002315-68-6 propyl benzoate
38510 136504-96-6 1,2-bis (3-aminopropyl) ethylenediamine, SML = 5 mg / kg
polymer with N-butyl-2,2,6,6-tetramethyl-4-
piperidinamine and 2,4,6-trichloro-1,3,5
triazine
38515 001533-45-5 4,4'-bis (2-benzoxazolyl) stilbene SML = 0.05 mg / kg (1)
38810 080693-00-1 3,9-bis (2, 6-di-tert-butyl-4-methylphenoxy) - SML = 5 mg / kg (amount of phosphites
2,4,8,10-tetroxa-3,9- and phosphate)
diphosphaspiro [5.5] undecane
(Bis (2,6-di-tert-butyl-4-
methylphenyl) diphosphite pentaerythhhritol)
38840 154862-43-8 Bis (2,4-dicumylphenyl) SML = 5 mg / kg (as the sum
pentaerythritol substance itself, its oxidised form
bis (2,4-dicumylphenyl)

pentaerythritolfosfátu and product jejíhydrolýzy 2,4
dikumylfenol)
38875 002162-74-5 bis (2,6-diisopropylphenyl) carbodiimide SML = 0.05 mg / kg. The substance may
be used if
PET layer separated.
38879 135861-56-2 Bis (3,4-dimethylbenzylidene) sorbitol
38885 002725-22-6 2,4-bis (2,4-dimethylphenyl) -6- [2-hydroxy-4- SML = 0.05 mg / kg. Only for
(Octyloxy) phenyl] -1,3,5-triazine aqueous foods.
38950 079072-96-1 bis (4-ethylbenzyliden) sorbitol
39200 006200-40-4 bis (2-hydroxyethyl) -2-hydroxypropyl-3- SML = 1.8 mg / kg
(Dodecyloxy) methylammonium chloride
39680 000080-05-7 2,2-bis (4-hydroxyphenyl) propane SML (T) = 0.6 mg / kg (28)
39815 182121-12-6 9 , 9-bis (methoxymethyl) fluorene SML = 0.05 mg / kg 39890 087826-41-3
bis (methylbenzylidene) sorbitol
069158-41-4
054686-97-4
081541-12-0
39925 129228-21-3 3,3-bis (methoxymethyl) -2,5-dimethylhexane SML = 0.05 mg / kg 40120 068951-50-8
fifth bis (polyethylene glycol ) hydroxymethyl SML = 0.6 mg / kg
phosphonate;
[(Hydroxymethyl) phosphoryl] bis [poly (oxyethylene)]
40320 010043-35-3 boric acid SML (T) = 6 mg / kg (23)
(Expressed as Boron) without
prejudice

special legal
regulation laying down
requirements for drinking water.
40400 010043-11-5 boron nitride
40570 000106-97-8 000110-63-4 40580
butane butane-1,4-diol SML (T) = 5 mg / kg (24) | || 41040 005743-36-2 calcium butyrate
41120 10043-52-4 calcium chloride 41280 001305-62-0

calcium hydroxide, calcium oxide 41520 001305-78-8
41600 012004- 14-7 Sulpho calcium

41680 037293-22-4 000076-22-2 camphor in accordance with footnote (9)
Appendix IIItéto Annex.
41760 008006-44-8 candelilla wax
41840 00105-60-2 caprolactam SML (T) = 15 mg / kg (5)
41960 000124-07-2 caprylic acid;
octanoic acid
42080 001333-86-4 soot in accordance with the specifications
set out in Appendix II.této
Annex.
42160 000124-38-9 carbon dioxide
42320 007492-68-4 cupric carbonate SML (T) = 5 mg / kg (7)
(Expressed as copper)
42500 - carbonic acid, salt
42640 009000-11-7 008015-86-9 42,720 carboxymethylcellulose

carnauba wax 42800 009000-71-9 casein
42880 008001 -79-4 castor oil
42960 064147-40-6 castor oil, anhydrous
43200 - castor oil, mono- and diglycerides
43280 009004-34-6 009004-36-8 43300 cellulose
cellulose acetate butyrate
43360 068442-85-3 cellulose, regenerated 43440 008001-75-0 ceresin

43480 064365-11-3 charcoal In accordance with the specifications
set vdodatku II of this
Annex.
43515 - choline chlorides of fatty acids QMA = 0,9 mg / dm2 6
coconut oil
44160 000077-92-9 citric acid
44640 000077-93-0 methyl citrate
45195 007787-70-4 CuBr SML (T) = 5 mg / kg (7) || | (Expressed as copper)
45200 001335-23-5 iodide SML (T) = 5 mg / kg (7)
(Expressed as copper) SML (T) =
1mg / kg (11) (expressed as iodine
)
45280 - cotton fibers
45450 068610-51-5 reaction product of p-cresol SML = 5 mg / kg
with dicyclopentadiene and isobutylene;
p-cresol-dicyklopentadie-isobutylene,
copolymer

cristobalite 014464-46-1 45560 45600 003724-65-0 crotonic acid; QMA (T) = 0.05 mg / dm2 6
(E) -but-2-enoic acid (33)
45640 005232-99-5 ethyl-3,3-diphenyl-2-cyanoacrylate; SML = 0.05 mg / kg
ethyl 2-cyano-3,3-diphenyl-
acrylic
45703 491589-22-1 calcium-cis-cyclohexane-1,2-dicarboxylate SML = 5 mg / kg.
45705 166412-78-8 diisononyl cyclohexane-1,2-dicarboxylate
45760 000108-91-8 009000-16-2 cyclohexylamine
45920 dammar
45940 000334-48-5 n-decanoic acid
46070 010016-20-3 alpha-dextrin
46080 007585-39-9 beta-dextrin
46375 061790-53-2 068855-54-9 46380
diatomaceous silica, anhydrous sodium carbonate,
calcined melt
46480 032647-67-9 dibenzylidene sorbitol
46700 - 5,7-di-tert-butyl-3- (3,4- and 2,3- SML = 5 mg / kg || | dimethylphenyl) benzofuran-2 (3H) -one
comprising:
a) 5,7-di-tert-butyl-3- (3,4-dimethylphenyl
) benzofuran-2 (3H) -one (80
100 wt.%), and
b) 5,7-di-tert-butyl-3- (2,3-dimethylphenyl
) benzofuran-2 (3H) -one (0-20
wt.%)
46720 004130- 42-1 2,6-di-tert-butyl-4-ethylphenol QMA = 4,8 mg / dm2 6
46790 004221-80-1 2,4-di-tert-butylphenyl 3,5-di-tert -
butyl-4-hydroxybenzoic acid
46800 067845-93-6 hexadecyl 3,5-di-tert-butyl-4-
hydroxybenzoic acid
46870 003135-18-0 dioctadecyl 3,5-di-tert-butyl-4-
hydroxybenzylphosphonate
46880 065140-91-2 monoethyl- (3,5-di-tert-butyl-4- SML = 6 mg / kg
hydroxybenzyl) phosphonate, calcium salt
47210 26427-07-6 dibutyl thiocíničitan polymer; In accordance with the specifications
thiobis (butyltin sulfide) polymer in Appendix II to this Annex.
47440 000461-58-5 dicyandiamide
47540 27458-90-8 di-tert-dodecyl disulfide SML = 0.05 mg / kg 47680 000111-46-6
bis (2-hydroxyethyl) ether ; SML (T) = 30 mg / kg (3)
diethylene
48460 000075-37-6 1,1-difluoroethane

48620 00123-31-9 1,4-dihydroxybenzene SML = 0.6 mg / kg
48720 00611-99-4 4,4'-dihydroxybenzophenone SML (T) = 6 mg / kg (15) | || 48960 _ 9,10-dihydroxystearic acid and SML = 5 mg / kg
oligomers
49485 134701-20-5 2,4-dimethyl-6- (1-methylpentadecyl) phenol SML = 1 mg / kg 49540 000067-68-5 dimethylsulfoxide

51200 000126-58-9 dipentaerythritol
51700 147315-50-2 2- (4,6-diphenyl-1,3,5-triazin-2-yl) -5- SML = 0.05 mg / kg
(Hexyloxy) phenol
51760 025265-71-8 dipropylene
000110-98-5 016389-88-1 dolomite

52640 52645 10436-08-5 cis-11-eikosenamid

erucamide 000112-84-5 52720 52730 000112-86-7 erucic acid
52800 000064-17-5 ethanol
53270 037205-99-5 009004-57-3 ethylkarboxymethylcelulóza
53280 ethylcellulose
53360 000110-31-6 N, N'-ethylenebis (oleamide) || | 53440 005518-18-3 N, N'-ethylenebis (palmitamide)
53520 000110-30-5 N, N'-ethylenebis (stearamide)
53600 000060-00-4 ethylenediaminetetraacetic acid
53 610 054 453 -03-1 ethylenediaminetetraacetic acid, copper SML (T) = 5 mg / kg (7)
salt (expressed as copper)
53650 000107-21-1 ethane-1,2-diol SML (T) = 30 mg / kg (3)
(Ethylene glycol)
54005 005136-44-7 ethylene-N-N'-palmitamide stearamide
54260 009004-58-4 ethylhydroxyethylcellulose
54270 - ethylhydroxymethylcelulóza
54280 - 54300 118337- ethylhydroxypropylcelulóza
09-0 2,2'-ethylidene-bis (4,6-di-tert-butyl SML = 6 mg / kg
phenyl) fluorfosfonit
54450 - fats and oils of animal or

vegetable food sources 54480 - Fats and oils of animal or
plant sources of food, hydrogenated
54930 025359-91-5 formaldehyde-1-naphthol, copolymer; poly (1- SML = 0.05 mg / kg
hydroxynaftylmethan)]
55040 000064-18-6 formic acid
55120 000110-17-8 fumaric acid
55190 029204-02-2 gadoleic
acid 55440 009000-70-8 gelatin
55,520 - 55,600
glass fibers - glass microspheres
55680 000110-94-1 glutaric acid
55910 736150-63-3 hydrogenated, acetates monoglycerides || | castor oil
55920 000056-81-5 099880-64-5 56020
glycerol glycerol dibehenate;
glycerol didokosonoát
56360 - esters of glycerol with acetic
56486 - glycerol esters with acids
aliphatic, saturated, linear, with
an even number of carbon atoms (C14-C18) and
with acids, aliphatic, unsaturated,
linear, with an even number of carbon
atoms (C16-C18)
56487 - glycerol esters with butyric acid
56490 - glycerol esters of erucic acid
56495 - glycerol esters with acid 12-
hydroxystearic
- Glycerol esters with lauric acid

56500 56510 - esters of glycerol with linoleic acid
56520 - glycerol esters with myristic
56535 - glycerol esters with nonanoic acid
56540 - esters of glycerol with oleic acid
56550 - esters of glycerol with palmitic acid
56570 - glycerol esters with propionic acid
56580 - glycerol esters of ricinoleic acid
56585 - glycerol esters with stearic
56610 030233-64-8 monobehenate
glycerol 56720 026402-23-3 monohexanoát
56800 030899-62-8 glycerol monolaurate diacetate glycerol 56880 026402-26-6

glycerol monocaprylate 57040 - glycerol ester monooleate
with ascorbic acid
- Ester of glycerol monooleate
57120 with citric acid
- Glycerol monopalmitate ester with ascorbic acid 57200

57280 - glycerol ester palmitate acid
lemon
57600 - ester glycerol monostearate
with ascorbic acid
57680 - ester glycerol monostearate
citric acid
57800 018641-57-1 glycerol tri (dokosanoát)
57920 000620-67-7 triheptanoát glycerol
58300 - glycine, salts
58320 007782-42-5 graphite
58400 009000-30-0 58,480
guar gum, gum arabic 009000-01-5 000111-14-8 58,720

heptanoic acid 59280 000100-97-0 hexamethyletetraamin; SML (T) = 15 mg / kg (22)
1,3,5,7-tetraazaadamantan (expressed as formaldehyde)
59360 000142-62-1 hexanoic acid
59760 019569-21-2 007647-01-0 59990 huntite
hydrochloric acid

60025 _ hydrogenated homopolymers or copolymers in accordance with the specifications
dec-1-ene, dodec-1-ene or oct-1-ene. set out in Annex V.
Not to be used for articles in
contact with fatty foods.
60030 012072-90-1 012304-65-3 hydromagnesite
60080 hydrotalcite
60160 000120-47-8 ethyl 4-hydroxybenzoate
60180 004191-73-5 isopropyl 4-hydroxybenzoate || | 60200 000099-76-3 methyl 4-hydroxybenzoate
60240 000094-13-3 propyl 4-hydroxybenzoate
60480 003864-99-1 2- (2-hydroxy-3,5-di-tert- butyl-phenyl) -5- SML (T) = 30 mg / kg (19)
chlorobenzotriazole²

hydroxyethyl 009004-62-0 60560 60880 61120 009032-42-2 009005-27-0 hydroxyethyl methylcellulose

hydroxyethyl starch 61390 037353-59-6 hydroxymethyl
61680 009004-64- 2 hydroxypropylcellulose
61800 009049-76-7 hydroxypropyl starch
61840 000106-14-9 12-hydroxystearic acid
62020 007620-77-1 lithium 12-hydroxystearate SML (T) = 0.6 mg / kg (8)
expressed as lithium
62140 006303-21-5 hypophosphorous acid
62240 001332-37-2 iron oxide
62245 012751-22-3 Iron phosphide For polymers and
PET copolymers
62280 009044-17-1 copolymer of isobutylene (2-methylpropene) and
butene

isopentane 000078-78-4 62450 62640 008001-39-6 Japan wax 62720 001332-58-7 kaolin

62800 - kaolin, calcined
62960 000050-21-5 milk
acid 63040 000138-22-7 butyl lactate
63280 000143-07-7 lauric acid 63760 008002-43-5 lecithin

63840 000123-76-2 levulinic acid
63920 000557 -59-5 lignoceric
64015 000060-33-3 acid, linoleic acid 64150 028290-79-1

64500 linolenic acid - lysine salt
64640 001309-42-8 magnesium hydroxide
64720 001309-48-4 magnesium oxide
64800 00110-16-7 maleic acid SML (T) = 30 mg / kg (4)
64990 02573661-2 maleic anhydride-styrene copolymer, sodium in accordance with the specifications || | salt set vdodatku II of this
Annex.
65020 006915-15-7 malic acid
65040 000141-82-2 malic acid 65520 000087-78-5 mannitol

65920 66822-60-4 sodium [N-methakryloyloxyethyl- || | N, Ndimethyl-N-carboxymethyl-amonium-
chloride-octadecyl-methakrylát-
ethyl methacrylate-cyclohexyl methacrylate-N-
vinyl-2-pyrrolidone, copolymers
66200 037206-01-2 009004-67-5 66240 methylkarboxymethylcelulóza

methylcellulose 66560 004066-02-8 2,2'-methylene-bis (4-methyl-6 - SML (T) = 3 mg / kg (6)
cyclohexylphenol)
66580 000077-62-3 2,2'-methylene-bis [4-methyl-6- (1- SML (T) = 3 mg / kg (6)
methylcyclohexyl) phenol]
66640 009004-59-5 methyl ethyl
66695 - 66700 009004-65-3 methylhydroxymethylcelulóza

methylhydroxypropylcellulose 66755 002682-20-4 2 methyl-2,3-dihydroisohiazol-3-one SML = 0.5 mg / kg. To use
only in aqueous dispersions
polymer emulsions and
at concentrations that do not
to the polymer surface or
food itself
antimicrobial effect.
66905 000872-50-4 N-methyl
66930 068554-70-1 methylsilseskvioxan residual monomer in
methylsilseskvioxanu; <1mg
methyltrimethoxysilane / kg
methylsilseskvioxanu

67120 012001-26-2 mica
67155 - A mixture of 4- (2-benzoxazolyl) -4 '- (5-methyl-2- most 0.05%
benzoxazolyl) stilbene, 4,4 bis (2- (amount used
benzoxazolyl) stilbene and 4,4'-bis (5-methyl- substance / composition) .In
2-benzoxazolyl) stilbene accordance with specifications
set vdodatku II of this
Annex.
67180 - mixture of decyl octylftalátu (50 wt.%) SML = 5 mg / kg (1)
didecyl phthalate (25% wt.) and
dioctylphthalate (25 wt.)
67200 001317-33-5 molybdenum disulfide
67840 - montanic acid and / or esters thereof
with ethylene glycol and / or butane-1,3-diol
and / or glycerol
67850 008002-53-7 Montan waxes
67891 000544-63-8 myristic acid
68040 003333-62-8 7- [2H-naphtho (1,2-d) triazole -2-yl] -3-
phenylcoumarin

68078 027253-31-2 neodecanoic acid, cobalt salt; SML (T) = 0,05mg / kg
7,7-dimethyloctanoic acid, cobalt salt (expressed as neodecanoic acid
) and
SML (T) = 0,05mg / kg (14)
(Expressed as cobalt)
Not to be used
in polymers intended for
contact with foods for which
According to Annex no. 4 to this
Decree established simulant
D.
68125 037244-96-5 nefelinsyenit
68145 080410-33-9 2,2 ', 2 "- nitrilo [triethyl-tris (3,3', 5,5' SML = 5 mg / kg (sum of phosphite and
tetra-tert-butyl-1,1'-biphenyl-2,2'-phosphate)
diyl) phosphite]
68960 000301-02-0 oleamide
69 040 000 112 -80-1 oleic acid oleyl
69760 000143-28-2 000144-62-7
69920 oxalic acid SML (T) = 6 mg / kg (29)
70000 070331-94-1 2 2'-oxamidobis [ethyl-3- (3,5-di-tert-butyl
4-hydroxyphenyl) propionate]
70240 012198-93-5 000057-10-3 ozokerite
70400 palmitic
acid 70480 000111-06-8 butyl palmitate
71020 000373-49-9 palmitoleic acid 71440 009000-69-5 pectin


71600 000115-77-5 pentaerythritol 71635 025151- 96-6 2,2-bis (hydroxymethyl) propane-1,3-diol- SML = 0.05 mg / kg. Should not be
di (octadec-9-enoate) used in polymers contacting
(Pentaerythritol dioleate) with food for which
Annex no. 4k hereto
established
simulant D 71670 178671-58-4 Pentaerythritol tetrakis (2-cyano-3,3-di- SML = 0.05 mg / kg
phenyl acrylate)
71680 006683-19-8 Pentaerythritol tetrakis [3- (3,5-di-tert
butyl-4-hydroxyphenyl) propionate]
71720 000109-66-0 003825-26-1 pentane
71960 aminium-perfluoro only for use in subjects
for opakovanépoužití
sintered přivysokých
temperatures.
72640 007664-38-2 phosphoric acid
73160 - mono- and di-n-alkyl (C16 and C18) esters SML = 0.05 mg / kg

phosphoric acid 73720 000155-96-8 (trichloroethyl) phosphate SML = ND (DL
= 0,02mg / kg, including
measurement uncertainty)
74010 145650-60-8 Bis (2 , 4-di-tert-butyl-6-methylphenyl) ethyl SML = 5 mg / kg (amount phosphites
phosphite and phosphate)
74240 031570-04-4 tris (2,4-di-tert- butylphenyl) phosphite
74480 000088-99-3 o-phthalic acid
74560 000085-68-7 benzyl butyl phthalate be used only as:
a) plasticizer in materials
and products for repeatedly
use
b) plasticizer in materials
and disposable articles
coming into use
contacting non-fatty
foods except for initial
and pokračovacíkojenecké
Nutrition by special
legal regulation 4).
c) technical support
in concentrations up
0.1% in the final product
SML = 30 mg / kg simulant
Food
74640 000117-81-7 Bis (2-ethylhexyl) phthalate be used only as:
a) plasticizer in materials
and products for repeatedly
coming into use
contacting non-fatty
food
b) technical support
in concentrations up
0.1% in the final product
SML = 1,5 mg / kg food simulant
Food
74880 000084-74-2 dibutyl phthalate be used only as:
a) plasticizer in materials
and products for repeatedly
coming into use

contacting non-fatty
food
b) technical support
in concentrations up
0.05% in the final product
SML = 0,3 mg / kg food simulant
Food
75100 068515-48-0 di-saturated branched phthalates be used only as:
028553-12-0 primary alkyl C8-C10 and containing more) plasticizer in materials
than 60% C9 and products for repeated
use
b) plasticiser in
Disposable
coming into contact
with beztukovýmipotravinami
apart from the initial and
infant formula
under a special legal
regulation4).
c) technical support
in concentrations up
0.1% in the final product
SML (T) = 9 mg / kg simulant
Food (42)
75105 068515-49-1 dialkyl phthalates with primary, saturated Only for use as:
026761-40-0 C9-C11 containing more than 90% a) plasticizer in materials
C10 and products for repeatedly
use
b) plasticiser in
Disposable
coming into contact
with beztukovýmipotravinami
apart from the initial and
infant formula
under a special legal
regulation4)
c) technical support
in concentrations up
0.1% in the final product
SML (T) = 9 mg / kg simulant
foods (42)
76320 000085-44-9 019455-79-9 phthalic
76415 pimelic acid calcium salt
76463 _ salts of poly (acrylic acid) SML (T) = 6 mg / kg (36 ) (for
polyakrylovoukyselinu)
76721 009016-00-6 polydimethylsiloxane (Mw> 6800) In compliance with the specifications
063148-62-9 set vdodatku II of this
Annex.
76723 167883-16-1 copolymers of poly (dimethyl siloxane) In accordance with the specifications
with end 3-aminopropyl groups and set vdodatku II of this
bis (4-isocyanatocyclohexyl) methane Annex
76725 661476-41-1 Polydimethylsiloxane (dimethyl siloxane) In accordance with the specifications
with end 3-aminopropyl groups and set vdodatku II of this
5-isocyanato-1- (isocyanatomethyl) -1,3,3- Annex
trimethylcyclohexane
76730 - polydimethylsiloxane, A-hydroxypropylated SML = 6 mg / kg
76815 - Polyester of adipic acid with glycerol in accordance with the specifications
or pentaerythritol, esters with even laid vdodatku In this
carbon number fatty acids Annex.
C12-C22, linear
76845 031831-53-5 Polyester of 1,4-butanediol with caprolactone In compliance with the specifications
set vdodatku II of this
Annex.
76866 - polyesters propane-1,2-diol and / or butane SML = 30 mg / kg
1,3-diol and / or butane-1,4-diol and / or
polypropylene glycol with adipic acid,
which may be terminated groups
derived from acetic or
fatty acids C12-C18 or n-1-ol
and / or decan-1-ol
76960 025322-68-3 070142-34-6 77,370
polyethylene poly (ethylene glycol-30)
dipolyhydroxystearate
77600 061788-85-0 polyethylene glycol esters with hydrogenated
castor oil
77702 - polyethylene glycol esters with aliphatic
monocarboxylic acids (C6-C22) and
their ammonium and sodium sulphates

77732 - poly (ethylene glycol) having 1 to 30 oxyethylene SML = 0.05 mg / kg. To use
units (typically 5) ether of butyl-3- (4-only PET.
hydroxy-3-methoxyphenyl) -2-cyanoacrylate
77733 - poly (ethylene glycol) having 1 to 30 oxyethylene SML = 0, 05 mg / kg. To use
units (typically 5) ether of butyl-3- (4-only PET.
hydroxyphenyl) -2-cyanoacrylate
77895 068439-49-6 ether of polyethylene glycol (EO = 2-6) and SML = 0 , 05 mg / kg and in accordance
monoalkyl (C16-C18) with the specifications in Appendix II
this Annex
77897 - poly (ethylene glycol) monoalkylethersulfát SML = 5 mg / kg
salt (1 to 50 oxyethylene units, typically 5
; alkyl C8-C20 linear and branched
)
79040 009005-64-5 sorbitan monolaurate polyethylene
79120 009005-65-6 sorbitan monooleate
79200 009005-66-7 polyethylene glycol sorbitan monopalmitate
79280 009005-67-8 polyethylene glycol sorbitan monostearate polyethylene
79360 009005-70-3 sorbitan trioleate, polyethylene glycol sorbitan 009005-71-4 79,440
-tristearát polyethylene
79600 009046-01-9 poly (ethylene glycol) tridecylether, phosphate SML = 5 mg / kg. For materials
and articles intended for
contact with aqueous foods. In
compliance with specifications
set vdodatku II of this
Annex.
79920 009003-11-6 poly (ethylene glycol-co-propylene glycol)
106392-12-5 009002-88-4 80000

polyethylene wax 80240 029894-35-7 polyglycerol ricinoleate
80640 - polyoxyalkylene (C2-C4) dimethylpolysiloxane
80720 008017-16-1 polyphosphoric acid
80800 025322-69-4 polypropylene
81060 009003-07-0 Polypropylene wax
81220 192268-64-7, poly [[6- [N- (2,2,6,6-tetramethylpiperidin-4 -SML = 5 mg / kg
yl) -n-butylamino] -1,3,5-triazine-2,4-
diyl] [N- (2,2,6,6-tetramethylpiperidin-4- yl
) imino] hexane-1,6-diyl, [N- (2,2,6,6-tetramethylpiperidin-4
yl) imino]] - a-
[N, N, N ', N'-tetrabutyl-N' - (2,2,6,6-tetramethylpiperidin-4-

ylamino) hexyl] [1,3,5-triazine -2,4,6
triamino] -U-N, N, N ', N'-tetrabutyl-1,3,5
triazine-2,4-diamine
81500 9003-39-8 poly (vinylpyrrolidone) In accordance with the specifications
set vdodatku II of this
Annex
81515 087189-25-1 polyglycerol zinc SML (T) = 25 mg / kg (38)
(Expressed as Zn)
81520 007758-02-3 potassium bromide
81600 001310-58-3 potassium hydroxide
81760 - powders, flakes and fibers of brass, bronze, SML (T) = 5 mg / kg (7)
copper, stainless steel, tin and alloys (expressed as copper) SML =
copper, tin and iron 48mg / kg (expressed as
iron)
81840 000057-55-6 propane-1,2-diol 000067-63-0
81882 propan-2-ol
82000 000079-09-4 propionic acid
82080 009005-37-2 1,2-propyleneglycol alginate
82240 022788-19-8 1,2-propyleneglycol dilaurate
82400 000105-62-4 dioleate 1.2
033587-20-1 82,560-propylene 1,2-glycol dipalmitate
82720 006182-11-2 1,2-glycol distearate
82800 027194-74-7 1,2-propylene glycol monolaurate
82960 001330-80-9 1,2-glycol monooleate
83120 029013-28-3 1,2-glycol monopalmitate
83300 001323-39-3 1,2-glycol monostearate
83320 - propylhydroxyethylcelulóza || | 83325 - 83330 propylhydroxymethylcelulóza
-
propylhydroxypropylcelulóza 83440 002466-09-3 pyrophosphoric acid 83455 013445-56-2

diphosphonic acid 83460 012269-78-2 pyrophyllite
83,470 014808-60- 7 quartz
83599 68442-12-6 reaction products of 2-sulfonylethyl oleate SML (T) = 0,18mg / kg (16)
with dichloro-dimethylcínem, sodium sulphide and (expressed as tin)
trichlormethylcínem
83610 073138-82-6 resin acids and rosin acids
83840 008050-09-7 008050-31-5 84000
colophony rosin, glycerol ester of rosin
84080 008050-26-8, pentaerythritol ester of rosin 065997-06-0
84210, 84240 065997-13-9
hydrogenated rosin, hydrogenated,

ester and glycerol 84320 008050-15-5 Rosin, hydrogenated,
ester with methanol
84400 064365-17-9 Rosin, hydrogenated,
ester with pentaerythritol
84560 009006-04-6 rubber, natural
000069-72-7 84,640

salicylic acid 85360 000109-43-3 dibutyl decanedioate
85601 - natural silicates (excluding asbestos)
85610 - silicates, natural, silanated (except asbestos
)
85680 01343-98-2 silicic acid
85840 053320-86-8 lithium silicate, sodium-magnesium SML (T) = 0.6 mg / kg (8)
(Expressed as lithium)
86000 - silicic acid, silylated
86160 000409-21-2 silicon carbide
86240 007631-86-9 86,285
silica - silica, silanized
86560 007647 -15-6 sodium bromide
86720 001310-73-2 sodium hydroxide
87040 001330-43-4 sodium tetraborate SML (T) = 6 mg / kg (23)
(Expressed as Boron) without
prejudice
special legal
regulation laying down
the drinking water requirements
87200 000110-44-1 sorbic acid
87280 029116-98-1 sorbitan dioleate
87520 062568-11-0 sorbitan monobehenate
87600 001338-39-2 sorbitan
87680 001338-43-8 monolaurate sorbitan monooleate
87760 026266-57-9 sorbitan monopalmitate
87840 001338-41-6 sorbitan monostearate
87920 061752-68-9 sorbitan tetrastearate | || 88080 026266-58-0 sorbitan trioleate
88160 054140-20-4 sorbitan tripalmitate
88240 026658-19-5 sorbitan tristearate

sorbitol 000050-70-4 88,320 88,600 026,836 -47-5 sorbitan monostearate
88640 008013-07-8 soybean oil, epoxidised SML = 60 mg / kg. However
in the case of PVC gaskets
to seal glass jars
with initial apokračovací
baby food by
special regulation
adapting the requirements
foods for
special nutrition and the way
their use, or
with the cereal and other
foods for infants and young
Children under this Decree
SML is lowered to 30 mg / kg.
In accordance with the specifications
Appendix II to this Annex.
88800 009005-25-8 starch, food
88880 068412-29-3 Starch, Hydrolyzed

stearamide 88960 89040 000124-26-5 000057-11-4 stearic acid
89120 000123 -95-5 butyl stearate
89200 007617-31-4 cuprous stearate SML (T) = 5 mg / kg (7)
expressed as copper
89440 - esters of stearic acid with ethylenklykolem SML (T) = 30 mg / kg (3)
90720 058446-52-9 005793-94-2 stearoylbenzoylmethane
90800 stearoyl-2-lactic acid , calcium sixth
90960 000110-15-6 succinic acid
91200 000126-13-6 sucrose acetate isobutyrate
91360 000126-14-7 sucrose octaacetate
91840 007704-34-9 sulfur
91920 007664-93-9 sulfuric acid
92030 010124-44-4 copper sulfate SML (T) = 5 mg / kg (7)
expressed as copper

talc 014807-96-6 92080 92150 01401-55-4 acid, tannin, in accordance with the specifications
JECFA
92160 000087-69-4 tartaric acid
92195 - taurine, salts seventh
92205 057569-40-1 2,2'-methylenebis (4-methyl-6-tert-eighth || | butylphenol) diester of terephthalic acid
92350 000112-60-7 tetraethylene ninth
92640 000102-60-3 N, N, N ', N'-tetrakis (2- 10th
hydroxypropyl) ethylenediamine | || 92700 078301-43-6 2,2,4,4-tetramethyl-20 (2,3-epoxypropyl) -7- 11th SML = 5 mg / kg
oxa-3,20-diazadispiro [5.1.11.2] -heneikosan-
21-one, polymer
92930 120218-34-0 thiodiethylenbis (5-methoxycarbonyl-2,6- 12th SML = 6 mg / kg
dimethyl-1,4-dihydropyridine-3-carboxylate
93440 013463-67-7 titanium dioxide
93520 000059-02-9 alpha-tocopherol

93680 010191-41-0 009000-65-1 gum tragacanth
93720 00108-78-1 2.4 , 6-triamino-1,3,5-triazine SML = 30 mg / kg
93760 000077-90-7 Tri-O-acetyl citrate
93970 - Tricyclodecanedimethanol SML = 0.05 mg / kg
bis (hexahydrophthalate)
94320 000112-27-6 000077-99-6 triethylene
94960 2-ethyl-2- (hydroxymethyl) propane-1,3-diol SML = 6 mg / kg

95000 028931-67-1, poly [2,2-bis (hydroxymethyl) butan-1-ol
trimethacrylate] -co-methyl methacrylate
95020 6846-50-0 2,2,4-trimethylpentane-1,3-diyl- SML = 5 mg / kg. When using
diisobutyrát are necessary disposable gloves
use
95200 001709-70-2 1,3,5-trimethyl-2,4,6-tris (3,5-di-tert
butyl-4-hydroxybenzyl) benzene
95270 161717- 32-4 2,4,6-tris (tert-butyl) phenyl-2-butyl-2- SML = 2 mg / kg (as the sum
ethylpropane-1,3-diol phosphate, phosphite, phosphate and the product | || hydrolysis = TTBP)
95420 745070-61-5 1,3,5-tris (2,2-dimethylpropanamide) benzene SML = 0,05 mg / kg food
95725 110638-71-6 vermiculite reaction product with lithium SML (T) = 0.6 mg / kg (8)
expressed as lithium citrate
95855 007732-18-5 Water In compliance with the special
legislation laying
establishing requirements for drinking
water
95858 - paraffins, refined, derived from petroleum or SML = 0,05 mg / kg and in accordance
synthetic hydrocarbon with the specifications
Appendix II to this Annex.
Not to be used
in subjects that come
into contact with fatty
food.
95859 - waxes, refined, derived from petroleum or in accordance with the specifications
synthetic hydrocarbons contained in Appendix II to this
Annex
95883 - white mineral oils, paraffinic, derived in accordance with specifications
Petroleum hydrocarbons contained in Appendix II to this
Annex

95905 013983-17-0 Wollastonite 95920 - wood flour and fibers, untreated 95935 011138-66-2

xanthan gum 96190 020427-58-1 Zinc hydroxide SML = 25 mg / kg (38)
(Expressed as Zn)
96240 001314-13-2 zinc oxide SML = 25 mg / kg (38)
(Expressed as Zn)
96320 001314-98-3 zinc sulfide SML = 25 mg / kg (38)
(Expressed as Zn)
------------------------- ----------------- ---------------- ----------------------------------

SECTION B
------------------------- -------------------- ------------- ------------------------------------- -----------------------
PM / REF. no. CAS No Name Restrictions and / or specifications
------------------------- ------------ --------------------- ----------------------------- -------------------------------
30180 02180-18-9 manganese acetate SML (T) = 0.6 mg / kg (10) (expressed as manganese
)
31500 025134-51-4 acrylic acid-2-ethylhexyl acrylate copolymer SML (T) = 6 mg / kg (36) (expressed
such as acrylic acid) and SML = 0.05
mg / kg (expressed as 2-ethylhexyl acrylate
)
31520 61167-58-6 2-tert-butyl-6- (3-tert-butyl-2-hydroxy-5- SML = 6 mg / kg
methylbenzyl) -4-methylphenyl acrylate
31920 00103-23-1 bis (2-ethylhexyl) -hexandioát SML = 18 mg / kg (1)
bis (2-ethylhexyl) adipate
34130 - alkyldimethylamine (linear alkylyC12-C20 with even SML = 30 mg / kg
carbon number)
34230 - alkyl (C8-C22) sulfonic acid SML = 6 mg / kg
34650 151841-65-5 hydroxide bis [2,2'methylbis (4,6-di-tert-SML = 5 mg / kg
butylphenyl) phosphate], aluminum
35760 01309-64-4 antimony trioxide SML = 0.02 mg / kg (expressed as
antimony and including measurement uncertainty)
36720 17194-00-2 barium hydroxide SML (T) = 1 mg / kg (12) (expressed as barium
)
36800 10022-31-8 barium nitrate SML (T) = 1 mg / kg (12) (expressed as barium
)
38240 00119-61-9 benzophenone SML = 0.6 mg / kg | || 38560 07128-64-5 2,5-bis (5-tert-butyl-2-benzoxazolyl) thiophene SML = 0.6 mg / kg
38700 63397-60-4 bis (2-karbobutoxyethyl) activity SML = 18 mg / kg
bis (isooktylsulfanylacetát)
38000 000553-54-8 lithium benzoate SML (T) = 0.6 mg / kg (8) (expressed as lithium
)
38505 351870-33-2 cis-endo bicyclo [2.2.1] heptane-2,3-dicarboxylic acid SML = 5 mg / kg. Do not use
acid di-sodium salt with polyethylene in contact with acidic
food. Purity> = 96%.
38800 32637-78-8 N, N'-bis (3- (3,5-di-tert-butyl-4- SML = 15 mg / kg

hydroxyphenyl) propionyl) hydrazide
38820 26741-53-7 bis (2,4-di-tert-butylphenyl) pentaerythritol diphosphite SML = 0.6 mg / kg
38940 110675-26-8 2,4-bis ( dodecylthiomethyl) -6-methylphenol SML (T) = 5 mg / kg (40)
39060 35958-30-6 1,1-bis (2-hydroxy-3,5-di-tert-butylphenyl) ethane SML = 5 mg / kg
39 090 - N, N-bis (2-hydroxyethyl) alkyl (C8-C18) amine SML (T) = 1.2 mg / kg (13)
39120 - N, N-bis (2-hydroxyethyl) alkyl (C8-C18) amine SML (T) = 1,2mg / kg (13) (expressed
hydrochlorides such as N, N-bis (2-hydroxyethyl)
alkyl (C8-C18 ) amino)
40000 00991-84-4 2,4-bis (oktylsulfanyl) -6- (4-hydroxy-3,5-di-tert-SML = 30 mg / kg
aniline) -1 3,5-triazine
40020 110553-27-0 2,4-bis [(octylthiomethyl) -6-methyl] phenol SML (T) = 5 mg / kg (40)
40160 61269-61-2 N, N'-bis (2,2,6,6-tetramethylpiperidine-4- SML = 2.4 mg / kg
yl) hexamethylene-1,2-dibromoethane, copolymer
40720 025013-16-5 2-tert-butyl-4-methoxyphenol; SML = 30 mg / kg
tert-butyl-4-hydroxyanisole (BHA =)
40800 13003-12-8 4,4'-butylidenbis (6-tert-butyl-3- SML = 6 mg / kg
methylfenylditridecylfosfit)
40980 19664-95-0 butyric acid manganese salt SML (T) = 0.6 mg / kg (10) (expressed as manganese
)
42000 63438-80-2 (2-karbobutoxyethyl) tin-tris ( isooktylsulfanylacetát) SML = 30 mg / kg
42400 10377-37-4 lithium carbonate SML (T) = 0.6 mg / kg (8)
(Expressed as lithium)
42480 00584-09-8 rubidium carbonate SML = 12 mg / kg
43600 04080-31-3 1- (3-chloroallyl) -3,5,7-triaza-1-azoniaadamantane SML = 0.3 mg / kg
chloride
43680 00075-45-6 chlorodifluoromethane SML = 6 mg / kg in accordance with
specifications laid down
Appendix II to this Annex.
44960 11104-61-3 cobalt oxide SML (T) = 0.05 mg / kg (14)
(Expressed as cobalt)
45440 - stryenované butylated cresols SML = 12 mg / kg
46640 000128-37-0 2,6-di-tert-butyl-4-methylphenol; SML = 3 mg / kg
(= BHT)
47500 153250-52-3 N, N'-dicyklohexylnaftalen-2,6-dicarboxamide SML = 5 mg / kg
47600 084030-61-5 di-dodecyltin bis (isooctyl-methylthioacetate) SML ( T) = 0.05 mg / kg (41) (as sum dodecyltriisooktylcín-

sulfanylacetátu, didodecyliisooktylcín-

sulfanylacetátu, dodecylcín-
trichloride and dodecyltin
dichloride) expressed summing
mono- and didodecylcínchloridů.
48640 00131-56-6 2,4-dihydroxybenzophenone SML (T) = 6 mg / kg (15)
48800 00097-23-4 2,2'-dihydroxy-5,5'-dichlorodiphenylmethane SML = 12 mg / kg
48880 00131-53-3 2,2'-dihydroxy-4-methoxybenzophenone SML (T) = 6 mg / kg (15)
49595 057583-35-4 dimethylcínbis (ethylhexyl mercaptoacetate) SML (T) = 0.18 mg / kg (16)
(Expressed as tin)
49600 26636-01-1 dimethylcínbis (isooktylsulfanylacetát) SML (T) = 0.18 mg / kg (16)
(Expressed as tin)
49840 02500-88-1 dioctadecyl disulfide SML = 3 mg / kg
50160 - di-n-oktylcínbis (n-alkyl (C10-C16) methylthioacetate) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50240 10039-33-5 di-n-oktylcínbis (2-ethylhexylmaleinát) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50320 15571-58-1 di-n-oktylcínbis (2-ethylhexyl-methylthioacetate) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50360 - di-n-oktylcínbis (ethylmaleinát) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50400 33568-99-9 di-n-oktylcínbis (isooctyl maleate) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50480 26401-97-8 di-n-oktylcínbis (isooktylsulfanylacetát) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50560 - di-n-oktylcínbutan1,4-diol bis SML (T) = 0.006 mg / kg (17)
(Methylthioacetate) (expressed as tin)
50640 03648-18-8 di-n-oktylcíndidodekanoát SML (T) = 0.006 mg / kg (17)
di-n-octyltin dilaurate (expressed as tin)
50720 15571-60-5 di-n-oktylcíndimaleinát SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50800 - di-n-oktylcíndimaleinát esterified SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50880 - di-n-oktylcíndimaleinát polymers (n = 2-4) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
50960 69226-44-4 di-n-oktylcínethylenglykolbis (methylthioacetate) SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
51040 15535-79-2 di-n-oktylcínsulfanylacetát SML (T) = 0.006 mg / kg (17)
(Expressed as tin)
51120 - di-n-oktylcínthiobenzoát [(2-ethylhexyl) SML (T) = 0.006 mg / kg (17)
methylthioacetate] (expressed as tin)
51570 00127-63-9 diphenylsulfone SML = 3 mg / kg (25)
51680 00102-08-9 N, N'-diphenylthiourea SML = 3 mg / kg

52000 27176-87-0 dodecylbenzenesulfonic acid SML = 30 mg / kg
52320 52047-59-3 2- (4-dodecylphenyl) indole SML = 0.06 mg / kg
52880 23676-09- 7 ethyl 4-ethoxybenzoate SML = 3.6 mg / kg
53200 23949-66-8 2-ethoxy-2'-ethyloxanilide SML = 30 mg / kg 53670 032509-66-3
ethyleneglycol-bis [3 3-bis (3-tert-butyl4- SML = 6 mg / kg
hydroxyphenyl) butanoate]
54880 000050-00-0 formaldehyde SML (T) = 15 mg / kg (22) 55 200 001 166
-52-5 dodecyl 3,4,5-trihydroxybenzoate; SML (T) = 30 mg / kg (34)
dodechl gallate
55280 001034-01-1 octyl-3,4,5-trihydroxybenzoate; SML (T) = 30 mg / kg (34)
octyl gallate
55360 000121-79-9 propyl 3,4,5-trihydroxybenzoate; SML (T) = 30 mg / kg (34)
propyl gallate
58960 00057-09-0 hexadecyl SML = 6 mg / kg
59120 23128-74-7 1,6-bis [3- (3,5-di-tert-butyl-4- SML = 45 mg / kg
hydroxyphenyl) propanamide] cyclohexane
59200 35074-77-2 1,6-bis [3- (3,5-di-tert-butyl-4- SML = 6 mg / kg | || hydroxyphenyl) propanoate] cyclohexane
60320 70321-86-7 2- (2-hydroxy-3,5-bis (1,1-SML = 1.5 mg / kg
dimethylbenzyl) phenyl) benzotriazole | || 60400 03896-11-5 2- (2'-hydroxy-3'-tert-butyl-5'-methylphenyl) -5- SML (T) = 30 mg / kg (19)
chlorobenzotriazole
60800 65447-77-0 dimethyl [1- (2-hydroxyethyl) -4-hydroxy-2,2,6,6 SML = 30 mg / kg
tetramethylpiperidine] succinate copolymer
61280 03293-97-8 2-hydroxy-4-n-hexyloxybenzofenon SML (T) = 6 mg / kg (15)
61360 00131-57-7 2-hydroxy-4 -methoxybenzofenon SML (T) = 6 mg / kg (15)
61440 02440-22-4 2- (2-hydroxy-5-methylphenyl) benzotriazole SML (T) = 30 mg / kg (19)
61600 01843-05-6 2-hydroxy-4-n-oktyloxybenzofenon SML (T) = 6 mg / kg (19)
63200 51877-53-3 manganese salt, lactic acid SML (T) = 0.6 mg / kg (10)
Manganui-dilaktát (expressed as manganese)
63940 008062-15-5 lignosulfonic acid SML = 0.24 mg / kg and for use as
dispersant for plastics dispersions.
64320 10377-51-2 lithium iodide SML (T) = 1 mg / kg (11) (expressed as iodine
) and SML (T) = 0.6 mg / kg (8)
(Expressed as lithium)
65120 07773-01-5 manganese chloride SML (T) = 0.6 mg / kg (10) (expressed as manganese
)
65200 12626-88-9 manganese hydroxide SML (T) = 0.6 mg / kg (10) (expressed as manganese
)
65280 10043-84-2 manganese hypophosphite SML (T) = 0.6 mg / kg (10) (expressed || | as manganese)
65360 11129-60-5 manganese oxide SML (T) = 0.6 mg / kg (10) (expressed as manganese
)
65440 - manganese pyrophosphate SML (T) = 0 6 mg / kg (10) (expressed as manganese
)
66350 085209-93-4 2,2'-methylenebis (4,6-di-tert-BUTYLPHENYL) SML = 5 mg / kg and SML (T) = 0.6 mg / kg
lithiumfosfát (8) (expressed as lithium)
66360 85209-91-2 2,2'-methylenebis (4,6-di-tert-butylphenyl) sodium phosphate SML = 5 mg / kg
66400 00088-24- 4 2,2'-methylenebis (4-ethyl-6-tert-butylphenol) SML (T) = 1.5 mg / kg (20)
66480 00119-47-1 2,2'-methylenebis (4- methyl-6-tert-butylphenol) SML (T) = 1.5 mg / kg (20)
67360 067649-65-4 dodecyltriisooktylcín-methylthioacetate SML (T) = 0.05 mg / kg (41) (as

sum dodecyltriisooktylcín- sulfanylacetátu, didodecyliisooktylcín-

sulfanylacetátu, dodecylcín-

trichloride and dodecyltin dichloride) expressed as the sum
mono- and didodecylcínchloridů.
67515 057583-34-3 monomethylcíntris (ethylhexylmerkaptoacetát) SML (T) = 0.18 mg / kg (16)
(Expressed as tin)
67520 54849-38-6 monomethylcíntris (isooctyl-methylthioacetate) SML (T) = 0.18 mg / kg (16)
(Expressed as tin)
67600 - mono-n-oktylcíntris (alkyl (C10-C16) -sulfanylacetát) SML (T) = 1.2 mg / kg (18)
(Expressed as tin)
67680 27107-89-7 mono n-oktylcíntris (2-ethylhexylsulfanylacetát) SML (T) = 1.2 mg / kg (18) (expressed as tin
)
67760 26401-86-5 mono n-oktylcíntris (isooctyl-methylthioacetate) SML (T) = 1.2 mg / kg (18) (expressed as tin
)
67896 020336-96-3 lithium-tetradecanoate; SML (T) = 0.6 mg / kg (8) (expressed
lithium as lithium myristate)
68320 02082-79-3 oktadecyl3- (3,5-di-tert-butyl-4- SML = 6 mg / kg
hydroxyphenyl) propanoate
68400 10094-45-8 octadecyl (Z) -dokos-9-enamide SML = 5 mg / kg
oktadecylerukamid
68860 004724-48-5 n oktylfosfoniová acid SML = 0.05 mg / kg 69160 014666-94-5
oleic acid, cobalt salt SML (T) = 0.05 mg / kg (14)
(Expressed as cobalt)
69840 16260-09-6 N- (Z) -octadec-9-en-1-ylhexadekanamid SML = 5 mg / kg
oleylpalmitamid
71935 007601-89-0 sodium perchlorate monohydrate SML = 0.05 mg / kg (31)

72081/10 - hydrogenated Petroleum hydrocarbon resins in accordance with the specifications
set out in Appendix II to this
Annex.
72160 00948-65-2 2-phenylindole SML = 15 mg / kg
72800 01241-94-7 diphenyl-2-ethylhexyl SML = 2.4 mg / kg
73040 13763-32-1 acid phosphoric acid, lithium salt SML (T) = 0.6 mg / kg (8) (expressed as lithium
)
73120 10124-54-6 phosphoric acid, manganese salt SML (T) = 0.6 mg / kg (10) (expressed as manganese
)
74400 - tris (nonylphenyl) ester of phosphorous acid SML = 30 mg / kg
or
tris (dinonylphenyl) ester of phosphorous acid
tris (nonyl and / or dinonylphenyl) phosphite
77440 - polyethylene glycol di (12hydroxyoktadec9enoát) SML = 42 mg / kg
polyethylenglykoldiricinoleát
77520 61791-12-6 polyethylene glycol ester of castor oil SML = 42 mg / kg
78320 09004-97-1 polyethylenglykol12hydroxyoktadec9enoát SML = 42 mg / kg
polyethylene glycol monoricinoleate
81200 71878-19-8 poly (6 - [(1,1,3,3-tetramethylbutyl) amino] -1,3,5- SML = 3 mg / kg
triazine-2, 4-diyl] - [(2,2,6,6-tetramethylpiperidine-4-
yl) imino] hexamethylene [(2,2,6,6-tetramethylpiperidine-4-
yl) imino] || | 81680 07681-11-0 potassium iodide SML (T) = 1 mg / kg (11) (expressed as iodine
)
82020 19019-51-3 propanoic acid, cobalt salt SML (T) = 0, 05 mg / kg (14)
(expressed as cobalt)
83595 119345-01-6 reaction product of di-tert-butylfosfonitu with biphenyl SML = 18 mg / kg in accordance with
obtained by condensation of 2,4 di-tert-butyl phenol products with specifications set out in Appendix II
Friedel-Craft reaction chloride fosforitéhoa this Annex.

biphenyl 83700 00141-22-0 (Z) -12-hydroxyoktadec-9-enoic acid SML = 42 mg / kg of ricinoleic acid

84800 00087-18-3 4-tert-butylphenyl salicylate SML = 1.2 mg / kg
84880 00119-36-8 methyl salicylate SML = 30 mg / kg
85760 12068-40-5 lithium aluminum silicate SML (T) = 0.6 mg / kg (8) (expressed
such as lithium)
85920 12627-14-4 lithium silicate SML (T) = 0.6 mg / kg (8) (expressed as lithium
)
85950 037296-97-2 silicic acid, salt sodium fluoride-magnesium SML = 0.15 mg / kg (expressed as fluoride
). Only for use in
layers of multilayer materials
which come into contact
with food.
86480 007631-90-5 sodium bisulfite SML (T) = 10 mg / kg (30)
(Expressed as SO2)
86800 07681-82-5 sodium iodide SML (T) = 1 mg / kg (11) (expressed as iodine
)
86880 - natriummonoalkyl-dialkylfenoxybenzendisulfonát SML = 9 mg / kg
86920 007632-00-0 sodium nitrite SML = 0.6 mg / kg
86960 007757-83-7 sodium sulfite SML (T) = 10 mg / kg (30)
(Expressed as SO2)
87120 007772-98-7 sodium thiosulfate SML (T) = 10 mg / kg (30)
(Expressed as SO2)
89170 13586-84-0 octadecanoic acid, cobalt salt SML (T) = 0.05 mg / kg (14)
stearic acid, cobalt salt (expressed as cobalt)
92000 07727-43-7 barium sulfate SML (T) = 1 mg / kg (12) (expressed as barium
)
92320 - tetradecylpolyethylenglykol (EO = 3-8) ether SML = 15 mg / kg
glycolic acid
92560 38613-77-3 tetrakis (2,4-di-tert-butylphenyl) biphenyl-4,4'-ylene SML = 18 mg / kg
diifosfonit
92800 00096-69-5 4,4'-thiobis (6-tert-butyl-3-methylphenol) SML = 0.48 mg / kg
92880 41484-35-9 thiodiethanolbis (3- (3 , 5-di-tert-butyl-4- SML = 2.4 mg / kg
hydroxyphenyl) propanoate)
93120 00123-28-4 didodecylthiodipropanoát SML (T) = 5 mg / kg (21) || | 93280 00693-36-7 dioctadecyl thiodipropanoát SML (T) = 5 mg / kg (21)
94400 036443-68-2 triethylene glycol bis [3- (3-tert-butyl-4-hydroxy-5- SML = 9 mg / kg
methylphenyl) propanoate]
94560 00122-20-3 triisopropanolamine SML = 5 mg / kg
95265 227099-60-7 1,3,5-tri (4-benzoylphenyl) benzene SML = 0.05 mg / kg
95280 40601-76-1 1,3,5-tris (4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl) -SML = 6 mg / kg
1,3,5-triazine-2,4,6 (1H, 3H, 5H) -trione
95360 27676-62-6 1,3,5-tris (3,5-di-tert-butyl-4 hydroxybenzyl) -1,1,3,5-SML = 5 mg / kg
triazine-2,4,6 (1H, 3H, 5H) -trione
95600 01843-03-4 1,1,3-tris (2-methyl-4-hydroxy-5-tert-butylphenyl) butane SML = 5 mg / kg
------------------------- ----------------- ---------------- ---------------------------------- --------------------------

APPENDIX I

PRODUCTS OBTAINED bacterial fermentation -------------------------------------------
----------------- --------------------------------

PM / Ref. CAS No Name Restrictions and / or specifications
NO.
--------------------------------------------- --------------- --------------------------------
(1) (2) (3) (4)
----------------------------------- ------------------------- ------------------------- -------
18888 080181-31-3 3-hydroxybutyric acid and 3- In accordance with the specifications
hydroxypentanoic acid copolymer, set out in Appendix II to this
Annex
---------------------------------------------- -------------------------------- --------------
APPENDIX II

SPECIFICATIONS

Part A: General specifications

Materials and articles made of plastic
shall not release primary aromatic amines in a determinable quantity (DL =
0.01 mg / kg food or food simulant).
Values ​​migration of primary aromatic amines listed in the Annex to this
restrictions apply.

Part B: Other specifications
--------------------------------------- ---------------------------------------------
PM / Ref. Other specifications
no.
----------------------------------------------- -------------------------------------
11530 (2-hydroxypropane-1-yl) acrylate
It may contain up to 25% (wt.), 2-hydroxyisopropyl acrylate (CAS No. 002918-23-2
)
16690 divinylbenzene
It may contain up to 45% of ethyl (vinyl) benzene.
18888 3-Hydroxybutanoic acid 3-hydroxypentanoic acid copolymer
Definition The copolymers are produced by the controlled fermentation
Alcaligenes eutrophus eluting
glucose and propanoic acid as carbon sources.
The organism used may be obtained by genetic
modifications and must come from a naturally
occurring Alcaligenes eutrophus strain
H16 NCIMB 10,442th stock culture of the organism is kept
in freeze-dried ampoules. Sub / working
is prepared from the stock culture, store
in liquid nitrogen and used to prepare the inoculum for
fermentation. Samples from the fermenter are viewed daily
under a microscope for any changes in morphology
colonies on a variety of agars at different
temperatures. The copolymers are isolated from heat-treated
bacteria by controlled digestion of the other cellular components,
washing and drying. These copolymers are usually
offered as shaped or reshaped melting
granules containing additives such as nucleating agents,
plasticizers, fillers, stabilizers and pigments which
satisfy the general and individual specifications.

- Chemical name Poly (3Dhydroxybutanoátco3Dhydroxypentanoát)
- CAS 80181-31-3
- Structural

formula CH3 - Structural formula |
CH 3 CH 2 O O
| | | |
(-O-CH-CH3-C-) m (O-CH-CH2-C-) n

wherein n / (m + n) is greater than 0 and less than or equal to 0.25
- Average of at least 150,000 (determined by gel permeation chromatography molecular
).
weight
- Content of less than 98% poly (3Dhydroxybutanoátco3D
hydroxypentaneoate) analyzed after hydrolysis as a mixture
3Dhydroxybutanové acid and kyseliny3D
pentanoic.
Description After isolation, white to off-white powder.
properties
- Identification
test:
- Solubility Soluble in chlorinated hydrocarbons such as
chloroform or dichloromethane but practically
insoluble in ethanol, aliphatic alkanes ave
water.
- Restriction QMA for but2enovou acid (crotonic acid) must
exceed 0.05 mg / 6dm2.
- Purity Prior to granulation the starting material (powder copolymer)
include:
- Nitrogen Not more than 2500 mg / kg of plastic
- Zinc Not more than 100 mg / kg of plastic
- Copper Not more than 5 mg / kg of plastic
- Lead more than 2 mg / kg of plastic
- Arsenic Not more than 1 mg / kg of plastic
- Chromium Not more than 1 mg / kg of plastic

23547 Polydimethylsiloxane (Mw> 6800)
The minimum viscosity of 100 × x 10-6 m2 s-1 * (= 100 centistokes) at 25 ° C
24903 Syrups, hydrolysed starch, hadrogenované

In compliance with the purity criteria for maltitol syrup E 965 (ii) set
Decree No. 54/2002 Coll.
25385 triallylamine
40 mg / kg of hydrogel at a ratio of 1 kg food to a maximum of 1.5 g
hydrogel. Use only in hydrogels intended for non-contact
with food.
38 320 4 (2-benzoxazolyl) -4 '(5metylbenzoxazolyl) stilbene
At most 0.05% (m / m) (amount of substance / composition)
42080 Soot
specifications
- Toluene extract: max. 0.1% determined by the ISO 6209
- UV absorption of cyclohexane extract at a wavelength of 386 nm: <0.02
to 1 cm cuvette or <0.1 to 5 cm cell, determined by generally accepted
analytical method
- Benzo [a] pyrene: max. 0.25 mg / kg of soot
- Maximum content of carbon black in the polymer: 2.5%.
43480 Active carbon
For use in PET material and the amount max.10mg / kg of polymer.
Same purity requirements as for Vegetable Carbon (black plant) (E
153) established by Decree No. 54/2002 Coll.
43680 chlorodifluorométhane
Chlorodifluoromethane content less than 1 mg per kg of substance
47210 dibutylthiocíničitá acid polymer
- Molecular unit = (C8H18S3Sn2) and (n = 1.5 - 2)
60025 Specifications:
- The minimum viscosity (at 100ST. C)> 3.8 cSt
- Average molecular weight> 450
64990 Maleianhydrid-styrene copolymer, sodium
MW fraction <1000 comprises less than 0.05% (by weight)
67155 A mixture of 4- (2-benzoxazolyl) -4 '- (methyl-2-benzoxazolyl) stilbene, 4,4'-bis (2-
benzoxazolyl) stilbene and 4,4'-bis (5-methyl-2 -benzoxazolyl) stilbene
Mixture obtained from the manufacturing process in the typical ratio:
(58-62%) (23-27%) (13-17)
72081/10 resins, hydrogenated petroleum products
Specifications:
Hydrogenated Petroleum hydrocarbon resins are produced by the catalytic or
thermal polymerization of aliphatic, alicyclic or arylalkene
dienes and olefins, from distillates of cracked materials with a boiling point at a higher
than 220st. C.Rovněž as the pure polymers from these sources
followed by distillation, hydrogenation and additional processing
Features:
Viscosity:> 3 Pa.s at 120 st. C.
Softening point::> 95 st. C as determined by ASTM Method E 28-67.
Bromine number: <40 (ASTM D 1159)
The color of a 50% solution in toluene <11 on the Gardner scale.
Residual aromatic polymer of <50 ppm.
76721 polydimethylsiloxane (Mw> 6800)
The minimum viscosity of 100x10-6 m2 * s-1 (= 100 centistokes) at 25 ° C
76723 Copolymers of poly (dimethylsiloxane) with terminal 3-aminpropylovými
groups and bis (3-isocyanatocyclohexyl) methane
Specifications:
The fractions having molecular weight <1000 should not exceed 1.5%
(Weight)
76725 Copolymers of poly (dimethylsiloxane) with terminal 3-aminopropyl
groups and 5-isocyanato-1- (isocyanatomethyl) -1,3,3-
trimethylcyclohexane
Specifications:
The fractions having molecular weight <1000 should not exceed 1%
(Weight)
76845 Polyester of 1,4-butanediol with caprolactone
MW fraction <1000 comprises less than 0.5% (by weight)
76815 Polyester of adipic acid with glycerol or pentaerythritol esters
with an even number of carbon atoms, fatty acids C12 -C22 linear
MW fraction <1000 comprises less than 0.05% (by weight)
77,895 alkyl (C16 - C18) ethers, poly (ethylene glycol) (n = 2-6)
Composition of the mixture:
The first alkyl (C16 - C18) ethers, poly (ethylene glycol) (n = 2-6) (
about 28 wt.%)
Second fatty alcohols (C16 - C18) (about 48 wt.%)
3rd alkyl (C16 - C18) ethers of ethylene glycol) (about 24 wt.%) "
79600 Poly (ethylene glycol) tridecylether, phosphate
Poly (ethylene glycol) (EO = <11) tridecylether, phosphate (including mono- and dialkyl ester
) with max. 10% content of poly (ethyleneglycol) (EO = <11)
tridecyletheru.
81500 Poly (vinylpyrrolidone)
Substance meets the purity criteria established in Commission Directive 96/77 / EC
83595 Reaction products of di-tert-butylfosfonitu with biphenyl obtained by condensing
2,4-di-tert-butylphenol with products of Friedel-Crafts chloride
Phosphorous biphenyl

composition
- 4,4'-bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
(CAS 38613-77-3) (36-46 wt% *)
- 4,3'-bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
(CAS 118421-00-4) (17 to 23 wt.%)
- 3,3'-bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]
(CAS 118421-01-5) (1-5 wt.%)
- 4 -bifenylenbis [0,0-bis (2,4-di-tert-butylphenyl) phosphonite]

(CAS 91362-37-7) (17 to 19 wt.%)
- Tris (2,4-di-tert-butylphenyl) phosphonite
(CAS 31570-04-4) (9-18 wt.%)
- 4,4'-bifenylenbis {[0,0-bis (2,4-di-tert-butylphenyl) phosphonite] [0,0-
bis (2,4-di-tert-butylphenyl) phosphonite]}
(CAS 112949-97-0) (<5 wt.%)
Other specifications:
- A phosphorus content of at least 5.4 to 5.9%
- Acid number of at most 10 mg KOH per gram
- Melting range: 85-110 st. C
88640 Soybean oil, epoxidized
Oxirane <8%, iodine number <6
95858 Specifications:
- Content of hydrocarbons with carbon number less than 25, not more than 40%
(M / m)
- Viscosity of at least 2.5 cSt at 100 ° C.
- Average molecular weight of at least 350.
95859 Waxes, refined, derived from petroleum based or synthetic hydrocarbon
The product should meet the following specifications:
- Content of mineral hydrocarbons with carbon number less than 25, exceeding
5% (m / m)
- Viscosity of at least 11 × x 10-6 m2 s-1 * (= 11 centistokes) at 100 ° C.
- Average molecular weight not less than 500.
95883 White mineral oils, paraffinic, derived from petroleum or synthetic
hydrocarbons
The product should meet the following specifications:
- Content of mineral hydrocarbons with carbon number less than 25, exceeding
5% (m / m)
- Viscosity of at least 8.5 x * x 10-6 m2 s-1 (= 8,5 centistokes) at 100 ° C.
- Average molecular weight of at least 480
---------------------------------------- --------------------------------------------
*) Used the amount of the substance / mixture amount
------------------------------------------ ------------------------------------------

APPENDIX III


NOTES RELATING TO THE COLUMN "RESTRICTIONS AND / OR SPECIFICATIONS"

(1) Warning: there is a risk SML could be exceeded in fatty food simulants

(2) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 10060 and 23920.


(3) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
15760, 16990, 47680, 53650, 89,440th

(4) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
19540, 19960 and 64800.

(5) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
14200, 14230 and 41,840th

(6) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 66560 and 66580.


(7) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
30080, 42320, 45195, 45200, 53610, 81760, 89200 , the 92,030th

(8) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
24886, 38000, 42400, 62020, 64320, 66350, 67896 , 73040, 85760, 85760,
85840, 85920 and 95,725th

(9) Warning: there is a risk that the migration of the substance deteriorates the organoleptic characteristics of the food
with which it is in contact, and consequently
final product does not comply with Article 2, second indent of Directive 89/109 / EEC.

(10) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
30180, 40980, 63200, 65120, 65200, 65280, 65360 , 65440 and 73,120th

(11) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
45200, 64320, 81680 and 86,800th

(12) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
36720, 36800, 36840 and 92,000th

(13) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 39090 and 39,120th


(14) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
44960, 68078, 69160, 82020 and 89,170th

(15) SML (T) in this specific case means that the restriction shall not be

Exceeded by the sum of specific migration of the substances listed under numbers PM / REF
15970, 48640, 48720, 48880, 61280, 61360 and 61,600th

(16) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
49595, 49600, 67515, 67520 and 83,599th

(17) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
50160, 50240, 50320, 50360, 50400, 50480, 50560 , 50640, 50720, 50800,
50880, 50960, 51040 and 51,120th

(18) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
67600, 67680 and 67,760th

(19) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
60400, 60480 and 61,440th

(20) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 66400 and 66,480th


(21) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 93120 and 93,280th


(22) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
17260, 18670, 54880 and 59,280th

(23) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
13620, 36840, 40320 and 87,040th

(24) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 13720 and 40,580th


(25) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 16650 and 51,570th


(26) QMA (T) in this specific case means that the restriction shall not be exceeded by the sum
residual quantities of the substances listed under numbers PM / REF
14950, 15700, 16240, 16570, 16600, 16630, 18640 , 19110, 22332, 22420,
22570, 25210, 25240 and 25,270th

(27) QMA (T) in this specific case means that the restriction shall not be exceeded by the sum
residual quantities of the substances listed under numbers PM / REF
10599 / 90A, 10599/91, 10599 / 92A and 10599 / 93rd

(28) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 13480 and 39680.


(29) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 22775 and 69920.


(30) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
86480, 86960 and 87,120th

(31) The rules on migration testing, where it is assumed contact with
fats must always be the verification of compliance with the requirements simulant D
as food simulant saturated fats.

(32) The rules on migration testing, where it is assumed contact with
fats must always be the verification of compliance with the requirements
used as a replacement food simulant D iso-octane.

(33) QMA (T) in this specific case means that the restriction shall not be exceeded by the sum
residual quantities of the substances listed under numbers PM / REF 14800 and 45,600th


(34) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
55200, 55280 and 55,360th

(35) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 25540 and 25550.


(36) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
10690, 10750, 10780, 10810, 10840, 11470, 11590 , 11680, 11710, 11830,
11890, 11980, 31500 and 76,463th

(37) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF
20020, 20080, 20110, 20140, 20170, 20890, 21010 , 21100, 21130, 21190,
21280, 21340 and 21,460th

(38) SML (T) in this specific case means that the restriction shall not be

Exceeded by the sum of specific migration of the substances listed under numbers PM / REF
81515, 96190, 96240 and 96320, as well as the salts (including double salts and
acid salts) of zinc of authorized acids, phenols or alcohols.
Same restriction for Zn applies to the names containing
-acid (s), salts which are present in the list, if the
corresponding free acid are not listed.

(39) at very high temperature could be a migration limit is exceeded.

(40) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 38940 and 40020.


(41) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 47600 and 67360


(42) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
specific migration of the substances listed under numbers PM / REF 75100 and 75,105th


(43) SML (T) in this specific case means that the restriction shall not be exceeded by the sum
migration of substances listed below Ref.č .: 19150 and 19,180th ".
APPENDIX IV


Lipophilic substances for which the application of the FRF
------------------------ ----------- -------------------------------------------------- -
Ref. No. CAS Name
no.
--------------------- ------------------------ ------------------------------------------
31520 061167-58- 6 2-tert-butyl-6- (3-tert-butyl-2-hydroxy-5-methylbenzyl) -4-
methylphenyl acrylate
31530 123968-25-2 2,4-di-tert-pentyl-6- [1- (2-hydroxy-3,5-di-tert
pentylphenyl) ethyl] acrylate | || 31920 000103-23-1 bis (2-ethylhexyl) adipate
34130 _ alkyldimethylamine (linear C12-C20 alkyl groups with even number of carbon atoms
)
38240 000119-61-9 benzophenone
38515 001533-45-5 4,4-di (benzoxazol-2-yl) stilbene
38560 007128-64-5 2,5-bis (5-tert-butylbenzooxazol-2-yl) thiophene
38700 063397-60-4 bis [2- (butoxycarbonyl) ethyl] tin bis (isooctyl-methylthioacetate)
38800 032687-78-8 N, N'-bis [3- (3,5-di-tert-butyl
-4- hydroxyphenyl) propanoyl] hydrazine
38810 080693-00-1 bis (2,6-di-tert-butyl-4-methylphenyl) pentaerythritol biphosphite
38820 026741-53-7 bis (2,4-di-tert-butylphenyl) pentaerythritol biphosphite
38840 154862-43-8 bis [2,4-bis (a, a-dimethylbenzyl) phenyl] -pentaerythritol-
biphosphite
39060 035958-30-6 2,2-ethane-1,1-diylbis (4,6-di-tert-butylphenol)
39815 182121-12-6 9,9-bis (methoxymethyl) fluorene
39925 129228-21-3 3,3-bis (methoxymethyl) -2,5-dimethylhexane
40000 000991-84-4 2- (3,5-di-tert-butyl-4-hydroxyanilino) -4,6-bis (oktylsulfanyl) -
1,3,5-triazine
40020 110553-27-0 2-methyl-4,6-bis [(oktylsulfanyl) methyl] phenol
40800 013003-12-8 [4,4-butane-1 1-diylbis (6-tert-butyl-3-methylphenyl)] -
bis (ditridecyl phosphite)
42000 063438-80-2 [2- (butoxycarbonyl) ethyl] tris (isooctyl-methylthioacetate)
45450 068610-51-5 copolymer of p-cresol, dicyclopentadiene and isobutylene
45705 166412-78-8 diisononyl cyclohexane-1,2-dicarboxylate
46720 004130-42-1 2,6-di-tert-butyl-4-ethylphenol
47540 027458-90-8 di-tert- dodecyldisulfid
47600 084030-61-5 di-dodecyltin bis (isooctyl-methylthioacetate)
48800 000097-23-4 4,4'-dichloro-2,2'-methylendifenol
48880 000131-53-3 ( 2-hydroxyphenyl) (2-hydroxy-4-methoxyphenyl) -methanone
49485 134701-20-5 2,4-dimethyl-6- (1-methylpentadecyl) phenol
49840 002500-88-1 dioctadecyl
51680 000102-08-9 N, N'-diphenylthiourea
52320 052047-59-3 2- (4-dodecylphenyl) indole
53200 023949-66-8 N- (2-ethoxyphenyl) -N '- ( 2-ethylphenyl) oxalamide
53670 032509-66-3 Ethylene glycol-bis [3,3-bis (3-tert-butyl-4-
hydroxyphenyl) butanoate]
54300 118337-09-0 2 2'-ethane-1,1-diylbis (4,6-di-tert-butyl phenyl) -fluorfosfonit
59120 023128-74-7 N, N'-hexane-1,6-diylbis [3- (3 , 5-di-tert-butyl-4-
hydroxyphenyl) propanamide]
59200 035074-77-2 hexane-1,6-diyl-bis [3- (3,5-di-tert-butyl-4-
hydroxyphenyl) propanoate]
60320 070321 -86-7 2- [3,5-bis (a, a-dimethylbenzyl) -2-hydroxyphenyl] benzotriazole
60400 003896-11-5 2- (3-tert-butyl-2-hydroxy-5-methylphenyl ) -5-chlorobenzotriazole
60480 003864-99-1 2- (3,5-di-tert-butyl-2-hydroxyphenyl) -5-chlorobenzotriazole
61280 003293-97-8 phenyl [4- (hexyloxy ) -2-hydroxyphenyl] methanone
61360 000131-57-7 phenyl (2-hydroxy-4-methoxyphenyl) -methanone
61600 001843-05-6 phenyl [2-hydroxy-4- (octyloxy) phenyl] methanone
66360 085209-91-2 sodium [2,2'-methylenebis (4,6-di-tert-butylphenyl)] - phosphate
66400 000088-24-4 2,2'-methylenebis (6- tert-butyl-4-ethylphenol)

66480 000119-47-1 2,2'-methylenebis (6-tert-butyl-4-methylphenol)
66560 004066-02-8 2,2'-methylenebis (6-cyclohexyl-4-methylphenol)
66580 000077-62-3 2,2'-methylenebis [4-methyl-6- (1-methylcyclohexyl) phenol]
68145 080410-33-9 nitrilotriethylentris (3,3 ', 5,5' tetra-tert-butylbifenyl
2,2'- diyl) -trisfosfit]
68320 002082-79-3 octadecyl-3- (3,5-di-tert-butyl-4-hydroxyphenyl) propanoate || | 68400 010094-45-8 N-oktadecyldokos-13-enamide
016260-09-6 69840 N-octadec-9-en-1-ylpalmitamid
71670 178671-58-4 pentaerythritol tetrakis (3,3 diphenyl-2-cyanoacrylate)
72081/10 - hydrogenated petroleum hydrocarbon resins
72160 000948-65-2 2-phenylindole
72800 001241-94-7 2-ethylhexyl diphenyl phosphate
73160 - mono- and di (n-C16 and n-C18) phosphate
74010 145650-60-8 bis (2,4-di-tert-butyl-6-methylphenyl) ethyl phosphite
74400 - tris (nonylphenyl) phosphite and tris (dinonylphenyl) phosphite
76866 - polyesters propane-1,2-diol or butane-1,3-diol or butane
1,4-diol or poly (propylene glycol) with adipic acid,
also end groups derived from acetic acid or
fatty acids C12-C18 or n-1-ol or decan-1-ol
77440 - poly (ethylene glycol) -diricinoleát
78320 009004-97-1 poly (ethylene glycol) -monoricinoleát
81200 071878-19 -8 poly ({6 - [(1,1,3,3-tetramethylbutyl) amino] -1,3,5-triazine-2,4- diyl}
[(2,2,6,6-tetramethylpiperidine -4-yl) imino] hexane-1,6-diyl
[(2,2,6,6-tetramethylpiperidin-4-yl) imino])
83599 068442-12-6 reaction products of 2-sulfanylethyl -oleátu
with dichlordimethylstannanem, sodium sulphide and
trichlormethylstannanem
83700 000141-22-0 ricinoleic acid
84800 000087-18-3 4-tert-butylphenyl salicylate
92320 - A- (carboxymethyl) -U-tetradecylpoly (ethylene glycol), n = 3 8
92560 038613-77-3 tetrakis (2,4-di-tert-butylphenyl) 4,4'-biphenyl-diylbisfosfonit
92700 078301-43-6, poly [20- (2,3-epoxypropyl ) -2,2,4,4-tetramethyl-7-oxa-3,20
diazadispiro [5.1.11.2] henikosan-21-one]
92800 000096-69-5 4,4 sulfanylbis (6-tert-butyl-3-methylphenol)
92880 041484-35-9 sulfandiyldiethylen bis [3- (3,5-di-tert-butyl-4-
hydroxyphenyl) propanoate]
93120 000123-28-4 didodecyl-3,3'-sulfandiyldipropanoát
93280 000693-36-7 dioctadecyl -3,3'-sulfandiyldipropanoát
95270 161717-32-4 (2-butyl-2-ethylpropane-1,3-diyl) - (2,4,6-tri-tert-butylphenyl) -
phosphite
95280 040601-76-1 1,3,5-tris (4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl) -1,3,5-
triazine-2,4,6 (1H, 3H, 5H) -trione
95360 027676-62-6 1,3,5-tris (3,5-di-tert-butyl-4-hydroxybenzyl) -1 3,5-triazine
2,4,6 (1H, 3H, 5H) -trione
95600 001843-03-4 1,1,3-tris (5-tert-butyl-4-hydroxy-2-methylphenyl) butane
- ----------------------- --------------------------- ------------------------------------
APPENDIX V


Particulars of declaration of conformity

Written declaration attached to materials and articles of plastics
must contain the following information:

A) the name and registered office or place of business operator which manufactures or imports
plastic items or substances intended for the manufacturing of those materials and articles
;

B) identification of the materials, articles or substances for the manufacture of these
materials or articles;

C) the date of the declaration;

D) certifying that the materials and articles of plastics meet the requirements of this ordinance and
directly applicable legal rule of the European Communities
^ 1b);

E) relevant information concerning the use of substances for which
by this decree imposed restrictions or specifications that
downstream business operators to ensure compliance with those restrictions;

F) the relevant information concerning the substances subject to restrictions
in food, obtained by experimental data or theoretical calculations
, specific information about the level of their specific migration and possibly
purity criteria in accordance with specific legal
regulations5), the user of these materials and articles to comply
relevant legislation;

G) specifications on the use of materials and articles, for example:

I) type or types of food with which it has come into contact

Ii) time and temperature of treatment and storage in contact with
food

Iii) the relationship between the surface that is in contact with food and
volume used to determine the compliance of the material or article;

H) using a plastic functional barrier multi-layer material or

Article, the confirmation that the material or article complies with the requirements of §
10 of this Decree.

10th Annex no. 4, Chapter I, Part 2, Section 2.1, the first sentence is replaced
sentence "Tests migration was carried out using the simulants mentioned below
food while selecting those which are considered the most stringent test conditions at
Chapter II. ".

11th In Annex no. 8, Part 1, point 1.5, at the end of the first sentence is replaced
dot comma and the words "except britanium
alloys used in accordance with Decree no. 141/1997 Coll., On technical requirements for || | manufacture, processing and storage of alcohol ^ 6). ".

Footnote. 6 reads:

"6) Decree no. 141/1997 Coll., On technical requirements for the production, processing and storage
alcohol, as amended.".

Art. II
Transitional provisions


Products intended for contact with food and dishes that do not comply
with the provisions of this Decree, may produce and market the longest until 7 March 2010.


Art. III
Efficiency


This Decree shall take effect on the date of its publication.
Minister
:

Filipiová vr