To Change The Code. On The Security Work In Adjusting And Refining Of Minerals

Original Language Title: změna vyhl. o bezpečnosti práce při úpravě a zušlechťování nerostů

Read the untranslated law here:

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$20 per month, or Get a Day Pass for only USD$4.99.
12/2013 Sb.


of 10 June 1999. January 2013,

amending Decree No 51/1989 Coll., on health and safety

at work and the safety of operations when editing and refining of minerals, in

as amended

The Czech mining Office lays down pursuant to section 6 (1). 6 (a). Czech law)

the National Council No. 61/1988 Coll. on mining activities, explosives and

the State Mining Administration, as amended by Act No. 184/2011 Coll.:

Article. (I)

In section 6 of Decree No. 51/1989 Coll., on safety and health at work

and safety when modifying and refining of minerals, as amended by

Decree No. 395/2011 Coll., paragraph 7, including footnotes, No 54


"(7) the surface of the sheet metal must be fluted or otherwise roughened. Request

check the State of wear of the covering sheet metal and mesh grates shall be deemed

satisfied, it shall proceed according to the technical standards specified by ^ 54) about

the design of structures. The controlled element is exchanged, if his

the thickness is less than the determined strength calculation referred to in the project

or in the studies.

54) for example, ČSN ISO 13822 principles of design of structures-Guest

existing construction. ".

Article. (II)

This Decree was notified in accordance with the directive of the European Parliament

and Directive 98/34/EC of 22 December 2004. June 1998 on the procedure for the provision of information

in the field of technical standards and regulations and of rules on information

the company, as amended by Directive 98/48/EC.

Article. (III)

The effectiveness of the

This Decree shall take effect on 1 January 2005. February 2013.


Ing. Pěgřímek in r.