To Perform From. On Trade In Forest Reproductive Material Of Tree Species

Original Language Title: K provedení z. o obchodu s reprodukčním materiálem lesních dřevin

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now

Read the untranslated law here: https://portal.gov.cz/app/zakony/download?idBiblio=57130&nr=29~2F2004~20Sb.&ft=txt

29/2004 Sb.



DECREE



of 20 December. January 2004,



implementing the Act 149/2003 Coll., on trade in the reproductive

material of forest tree species



44/2010: Sb.



402/2013: Sb.



The Ministry of agriculture shall be determined according to section 39 of the Act No. 149/2003 Coll.

marketing of forest reproductive material forests

major species and artificial hybrids, intended to restore the forest and to the

reforestation, and amending some related laws (Act on trade

with forest reproductive material), (hereinafter referred to as the "Act"):



§ 1



The requirements on the quality of forest reproductive material



(Section 4 of the Act)



(1) the quality of forest reproductive material is determined by the species of purity,

genetic, morphological, physiological characteristics and

the State of health.



(2) the quality of seed shall be determined in accordance with the applicable ČSN ^ 1).

Each section of the seeds or fruit of the referenced into circulation shall be assessed according to the characters

referred to in § 8 para. 4 of the Act.



(3) the quality of the seed referred to in paragraph 2 shall be determined in

independent laboratory authorised by the Ministry of accredited internationally

a recognized procedure for testing the quality of seed. For

an independent laboratory, the laboratory is considered to be operated by a legal entity or

a natural person who seed under consideration referred to in paragraph 2

does not refer to the circulation. The quality of the seeds found in the laboratory

another Member State of the European Union accredited by internationally recognised

the procedure for testing the quality of seed, shall be considered as

equivalent to the quality of the data shall be provided in the first sentence.



(4) in the case of small sections of the case does not apply the requirements referred to in

paragraph 2, provided that their weight does not exceed the mass specified directly

the applicable law of the European Union, laying down detailed

rules for the application of Council Directive 1999/105/EC as regards the definition of a small

quantities of seed ^ 10).



(5) sections of the fruits and seeds may be put into circulation only if they

species purity not less than 99%. The exception are closely related species

In addition to the artificial hybrids, the species purity ever spelled out the seeds or section

the fruit, if it is less than 99%.



(6) quality planting stock shall be determined according to the applicable ČSN ^ 2) and

be assessed according to the following characters:



and the root of the neck, thickness)



(b) the height of the part above ground)



(c)) the maximum age,



(d)) shall be inadmissible deformations, shape



e) ratio of volume to the volume of the above-ground parts of the roots.



(7) if necessary, checks the quality of planting material by

paragraph 6, an independent laboratory responsible for Ministry, accredited

an internationally recognized procedure for testing the quality of plants

material. As an independent laboratory, the laboratory is considered to be operated by

legal entity or natural person that planting stock under consideration

in accordance with paragraph 6 does not refer to the circulation. Quality planting stock

assessed in the laboratory in another Member State of the European Union

accredited internationally accepted procedure for testing the quality of

planting stock shall be deemed equivalent to the quality of the data shall be provided in accordance with

the first sentence.



(8) planting stock



and may be placed into the poplars) circulation, if it satisfies the requirements referred to in

Annex No. 4 and does not show defects as referred to in annex 5,



(b)) other species can be put into circulation if it satisfies the requirements referred to

in annexes 2 and 3 and does not show defects as referred to in annex 5,



c) intended for cultivation in the nursery can be put into circulation unless

It shows no defects listed in annex 5.



(9) ^ 3) parts of the plant can be put into circulation unless they meet the requirements

listed in annex 6.



(10) age and the method of planting stock cultivation of forest tree species is

indicates a formula whose structure is given in annex 7.



(11) reproductive material can be put into circulation only if:

does not show a harmful organisms ^ 4). Reproductive material, for

that has been known of harmful organisms ^ 4) subject

extraordinary measures must be accompanied by a plant from the continued use of

proven to be excluded.



§ 2



The details of merging partitions reproductive materials and determine the height

zones



(§ 5 para. 7 of the law)



(1) Altitude zones are determined by the degree of forest vegetation, identified from the

maps of forest vegetation degrees in regional forest development plans. ^ 5) in the

basic material growing out of land intended for the performance of

forest functions altitudinal range specifies the authorised person in their recognition.



(2) the conditions referred to in § 5 para. 4 of the Act, it is

merge partitions within a category acceptable identified

reproductive material or within a category selektovaného

of reproductive material, with the exception of reproductive material of the phenotypic

class A, of two or more units. In a sign of the new

the section of reproductive material in the registration number of the units of

replace the serial number of the pětimístným source code, where first place is

the 9 and the other four spots are made up of the serial number of the new

the partition assigned by a person authorised by the Ministry of.



(3) subject to the conditions set out in § 5 para. 4 of the Act, it is

permitted to merge partitions identified reproductive material derived from

seed sources and stands. The newly created partition is marked as reproductive

material from a seed source and in the registration number of the units of the

replace the serial number of the pětimístným source code, where first place is

the 9 and the other four spots are made up of the serial number of the new

the partition assigned by a person authorised by the Ministry of.



(4) If the conditions referred to in paragraphs 2 and 3, and subject to

the merge will be a section of reproductive material of a known source of origin and

partition of reproductive material derived from unknown origin, shall be

the newly created partition as unknown origin.



(5) if there is a merger of two or more sections of the reproductive

material, you must keep the original designation of the individual parts of the newly

the merged section and on the resulting detectable provably the partition will be

issued a new certificate of origin.



(6) the conditions referred to in § 5 para. 4 of the Act, it is

merge partitions within a category acceptable identified

reproductive material or within a category selektovaného

reproductive material derived from a single unit

ripening, while it should be noted the years of maturation

and the proportion of reproductive material for each of the years.



§ 3



Details of the notice of the collection of the reproductive material



(§ 5a, paragraph 5, of the Act)



Announcement of the pattern of collection of seed, taking parts of plants

or lifting of planting stock of natural regeneration, or about

the venue of the subscription part of the plant, if it subsequently vegetative množený

reproductive material, or to merge the sections of reproductive material

is given in annex 9.



§ 4



The details of the proof of origin and the application of the exposing



(§ 6 para. 8 of the Act)



(1) the model of the application for certificate of origin of the reproductive material

(hereinafter referred to as the "certificate of origin") is given in annex 10. Model application

for the issue of a certificate of origin for the partition merging sections (section 2)

is given in annex No. 11b.



(2) the patterns of certificate of origin referred to in annexes 12 to 14a.



§ 5



Details about the contents and the form of passport, about how to connect it

and the classification marking of parts of plants and planting stock



(§ 8 paragraph 9 of Act)



(1) to each section of the reproductive material exhibiting supplier

the accompanying sheet.



(2) the seed shall be made to the accompanying sheet according to the model

referred to in annex 16. To the entire section of seed with

connecting part and the accompanying worksheet. Part B is inserted one inside and

one is attached outside the form of the accompanying label to each package.



(3) for the part of the plant passport shall be drawn up in accordance with the specimen

in annex No. 17. The entire consignment of parts of the plant are attached part and

the accompanying worksheet. Part B is attached to each package of the shipment in the form

the accompanying label.



(4) for the planting stock shall be made to the accompanying sheet according to the model

set out in annex 18. The entire consignment of planting stock is

connecting part and the accompanying worksheet. Part B is attached to the whole consignment

by means of the accompanying label.



(5) the two parts of the accompanying worksheet can be distinguished by category

basic material: color-yellow-identified, selected-

Green, qualified-pink, tested-blue.



(6) If the supplier is entitled to issue plant passports

under another law ^ 4), use a cover sheet and accompanying

label as a plant Passport ^ 5a) in the genera or species

laid down in this regulation.



(7) the viability of the seeds or fruits of the ascertained biochemical test

dyeing in solution trifenylchlorid tetrazolia.



(8) the supplier supplying reproductive material from the United States to

another Member State of the European Union under section 25 c of the Act may, in

the accompanying data sheets referred to in annexes 16 to 18 indicate

the identification codes corresponding to relevant entries on the label or in


the supplier's document referred to in the recommendations of the Commission of the European Union ^ 11).



§ 6



Spool stand details to phenotypic classes and marking



(Section 10, paragraph 4, of the Act)



(1) the Phenotypic classification is a tree species in the stands of the spooler

phenotypic classes according to the criteria set out in annex 19. For mixed

the stands are classified in phenotypic classes all in the bushes represented

wood species.



(2) are subject to all kinds of Phenotypic classification tree species with the exception of

their artificial hybrids. Classified growths of alder, birch, crane,

Poplar, willow, pear trees and Apple trees polničky forest legacy 20 years, Elm,

Walnut, Douglas fir, white FIR, mention the enormous pines,

Cherry and kaštanovníku of edible 40 years and older stands of other

trees over 60 years of age.



(3) the results of phenotypic classification in the field do not indicate. In the forest

^ 6) marketing plan (the "plan") or the forest of

outline ^ 7) (hereinafter referred to as the "outline") are marked according to standard for their

the development.



§ 7



For details on marshaling recognised basic material to

units of



(Section 12, paragraph 2, of the Act)



(1) The unit will be the only recognised source, providing

reproductive material of the same category.



(2) the identification number of the unit provides unique identification

recognized by the unit. Track registration number units, the significance of his

the individual components and the designation of regions, in which the units of

they are located, including the scope of the branches of an authorised person, are listed in the

Annex No. 20.



(3) if the units are in the gene base, part of the

number units of tree species, for which the gene

base code is published, marking the gene bases assigned

responsible person. In the case of the publication of new gene base according to paragraph 2i

paragraph. 2 of the Act or the cancellation of the announcement of the gene base according to § 2 para.

3 of the Act, the designated person makes a change to the registration number units

and



and make up to the reference number) units designation code gene

the base, or



(b) revoke the designation code) gene base in the registration number of the recognised

unit.



§ 8



For details about the requirements for the recognition of the seed source and stands as a source of

identified reproductive material



(Article 13, paragraph 4, of the Act)



(1) for the source identified reproductive material, it is possible to recognise the

only sources which meet the requirements referred to in § 13 para. 1 of the law. In

the crop can be recognised even more trees.



(2) the recognition is sought, the owner of the resource. Model application for approval

the basic material is given in annex # 21. Annex to the application-

application for recognition of a seed source or for the source of the identified

the basic material is indicated in annex No. 23. In the case of stands

i shall submit proof of their phenotypic class. This document can be

copies of the relevant parts of the plan or the outline.



(3) proof of the approval, the Commissionaire contains in addition to the data

needed for a central register of recognised units (section 18 (1)

the Act) information



and the length of time the recognition); at the source of the seeds of the maximum of 10 years, stands for

the validity of the plan or the outline,



(b) the source merge) units, where the type of the source will be marked

as



1. the crop shall, if recognized by the merged unit stands,



2. the source of the seeds, if recognized by the unit merged seed sources,

or



3. the source of the seeds, if recognized by the unit merged seed sources and

stands,



(c)) the creation of units, which is assigned a registration number (§

7 (2). 2),



(d)) the land on which the resource is located; for seed sources growing outside

Les cadastral territory name and number and the reference number, other

seed sources and stands of the data on the drives of the spatial distribution of

forest ^ 12) in units of and



(e) the plan or applicable) identification of the outline, which is a recognition of the

carried out (applies to seed source growing on land intended for

performance of the functions of the forest and vegetation).



§ 9



For details about the requirements for the recognition of selektovaného source of reproductive

the material and its marking



(Article 14, paragraph 4, of the Act)



(1) as a source of selektovaného reproductive material can be recognized by the

one or more tree species in vegetation if it satisfies the requirements referred to in

Annex 22.



(2) the source of the selektovaného reproductive material recognised for a period of

the validity of the plan or the outline.



(3) in the field is the source of selektovaného of reproductive material

do not indicate.



(4) the owner shall submit a request for recognition of sources sources selektovaného

reproductive material authorised person. Model application for approval

the basic material is given in annex # 21. Annex to the application-

application for recognition of the crop as a source of selektovaného or the test

the basic material is indicated in annex No. 25.



(5) proof of approval, the Commissionaire contains in addition to the data

needed for a central register of recognised units (section 18 (1)

the Act) information



and length of time) recognition, which corresponds to the period of validity of the plan or the outline,



b) merge into phenotypic class B stands units,



(c)) the creation of units, which is assigned a registration number (§

7 (2). 2),



(d) any restrictions on the scope of recommendation) toll intentional mining carried out in the

the stands or on the protective period, after which it may be in the stands

toll carried out intentionally, mining only with the consent of an authorised person (§ 17

of the Act),



(e) the plan or applicable) identification of the outline, which is a recognition of the

carried out,



(f) forest floor distribution units) ^ 12) in units of and



(g)) meet the requirements for recognition of the sources listed in annex 22.



§ 10



For details about the requirements for recognition as a source of qualified resources

reproductive material and its marking



(Article 15, paragraph 4, of the Act)



(1) Seed Orchard or mixture is determined according to the documentation

the registered responsible person. As a source of qualified reproductive

material can be is to acknowledge, if their condition is in accordance with the

documentation and satisfy the requirements referred to in annex 26.



(2) Seed Orchard can be recognised as a qualified source of reproductive

material only when in a set in accordance with the documentation for the

establishing and maintaining the required number of clones with a good song

health and seed Orchard is at an age when she joined the fertility, the

participating in an absolute majority of the represented clones.



(3) the mixture is meant to recognize when it is able to provide

reproductive material in the composition, quantity and quality, according to the documentation

for the establishment of a recognized source of registered Commissionaire.



(4) parents of family are recognized as a qualified source of reproductive

material for the deliberate hybridization or seed collection of free sprášení.

Clones and are recognised as the source of the ortets qualified reproductive

pick parts of plants for the establishment of seed orchards,

realization of breeding programs and other purposes. Recognized can be

parents of families, clones of the ortets and which meet the requirements referred to in

Annex No. 26.



(5) the owner shall submit a request for recognition to the source the source of qualified

reproductive material authorised person. Model application for approval

the basic material is given in annex # 21. Annex to the application-

application for recognition of orchards or clonal mixtures as a source

qualified or tested reproductive material and request for

recognition of the parents of families, ortetu or clone as a source of qualified or

reproductive material to be tested are listed in annexes no 27a

27B.



(6) proof of approval, the Commissionaire contains in addition to the data

needed for a central register of recognised units (section 18 (1)

the Act) information



and the length of time the recognition); in the case of seed orchards and clonal mixtures up to a

for 10 years,



(b)) the creation of units, which is assigned a registration number (§

7 (2). 2),



(c) the parents of the family, ortetech) and clones, and that their list and descriptive

data, in the case of seed orchards and clonal mixture diagram their arrangement,

clips of their planting and year of Foundation resources



(d)) of the land on which the resource is located, the cadastral area,

plot, area, altitude and altitudinal range,



(e) the name of the resource, that is) if the seed orchards and clonal mixture, and



(f)) meet the requirements for the approval referred to in annex 26.



(7) the parents of families, clones and marks the owner of ortets on the ground two

yellow stripes with a width of 5 cm, with a space between the bars 20 cm at a height of 130 cm

above the ground. Into the space between the bars with the yellow color to write a serial number

source. If the tribes do not reach the required dimensions, shall ensure that the owner of the

indicate other suitable permanent way.



§ 11



For details about the requirements for the recognition of tested reproductive resources

the material and its marking



(To 16, paragraph 4, of the Act)



(1) Crop, seed Orchard, parents of families, ortet, clone or clonal mixture is

can be recognised as a source of tested reproductive material, if they meet the

requirements referred to in annex # 28.



(2) the owner shall submit a request for recognition of a source, the source of the test

reproductive material authorised person. Model application for approval

the basic material is given in annex # 21. Annex to the application-


the application for recognition for selektovaného or source test

of reproductive material, application for recognition of a seed or mixture

clones as a source of qualified or tested reproductive material

and a request for recognition of the parents of families, ortetu or clone as a source

qualified or tested reproductive material are listed in the

the annexes no 25, 27a and 27b.



(3) an integral part of the application for recognition of tested reproductive resources

the material is about the origin of documentation, testing, and test results

source.



(4) the document of approval, the Commissionaire contains in addition to the data

referred to in § 9 para. 5, section 10, paragraph 1. 6 and the data necessary for the Central

registration of units (article 18, paragraph 1, of the Act) information



and the purpose of use of the reproductive material), if the resource has been bred

for a special purpose, and



(b)) meet the requirements for recognition of the sources listed in annex # 28.



§ 12



For details about the information being written to the register



(Section 18, paragraph 2, of the Act)



For details about the information being written to the register are listed in the annex

# 30.



section 13 of the



Rules promulgation of gene bases, farming in the forests on the

their territory and their method of marking



(To section 2, paragraph 4, of the Act)



(1) the Gene base shall be published in the framework of individual areas

provenance for all tree important species of forest tree species for a period

the validity of the plan or the outline. Gene base it is possible to declare for

one or more trees.



(2) Gene base it is possible to declare in one or several

separate sections. The minimum amount one gene base is 100 ha.



(3) proof of publication of gene base of Commissionaire contains in addition to the

the data necessary for a central register (§ 2, paragraph 2, of the Act) data

about



and the length of time of its publication), which corresponds to the period of validity of the plan or

the outline,



(b) forest floor distribution units) ^ 12) in gene base,



(c) the plan or applicable) identification of the outline, which is a publication of

gene base,



(d) the gene base, name)



(e)) code base, gene



f) farming in the forests on the territory of the gene base.



(4) for trees, for which the gene base proclaimed, is used

preferably natural regeneration. If you need artificial regeneration, it is used in

tree species, for which the gene base declared, reproductive material

originating in the same gene base.



(5) the code designation of gene bases designated person assigned.



§ 14



The details of applying for licensure



(Section 20, paragraph 3, of the Act)



(1) if the applicant for the grant of licences a natural person, the application contains a

In addition to the General requirements for filing pursuant to the administrative code also:



and the designation of the subject matter of the license), whose grant is applied for,



(b) a certified copy of a document) to achieve vocational forestry

education,



(c) a description of the existing professional) forestry practice [paragraph 2 (b), (h))]

the applicant, indicating the number of years of practice,



d) written consent of the employer (article 21a (2) of the Act), if a natural

person by an employee of that he does not hold the position of head of the worker

the State enterprise, State organization or company

engaged in business activities in the field, which is the subject of the license, or

an employee of the public authorities (section 26 of the Act) or authorized person (§

30 of the law).



(2) if the applicant for the license grant legal person or natural person

the person who appoints a representative satisfying the conditions for the

the granting of the licence, the request contains, in addition to the General requirements for filing

According to the administrative code also:



and the designation of the subject matter of the license), whose grant is applied for,



(b)) name, surname, date of birth, social security number, if assigned,

place and County of birth and residence of the responsible representative of the applicant,



c) certified copy of proof of the achievement of vocational forestry

education responsible representatives,



(d) a description of the existing professional) forestry practice (the performance of professional activities in

forestry in the economic adjustment of forests, forestry education and

research and in the State administration of forests) of the responsible representative of the applicant with

indicating the number of years of practice,



(e)) the written consent of the employer (article 21a (2) of the Act), if a natural

person by an employee of that he does not hold the position of head of the worker

the State enterprise, State organization or company

engaged in business activities in the field, which is the subject of the license, or

an employee of the public authorities (section 26 of the Act) or authorized person (§

30 of the law).



(3) the documents referred to in paragraph 1 (b). (e)) or in paragraph 2 (a). (f))

are not part of the application for renewal of the license. Model application for the grant of

or extension of the period of validity of licences is given in Annex # 31.



§ 15



Details of record keeping and submission of records about partitions

of reproductive material and the management and presentation of evidence about the forest

nursery activities



(Section 24, paragraph 4, of the Act)



(1) the supplier, which said material into circulation, leads on each

the section of reproductive material of the register:



and) the Czech and the scientific name of tree species, where appropriate, indication of the clone or a mixture

clones,



(b) the registration number of the units),



(c) the number of the certificate of origin),



(d)) category of reproductive material (identified, selected,

qualified, tested),



e) region of provenance,



f) in the case of seed, the year of maturation,



g) in the case of planting stock, age and the type of seedlings or cuttings

used as planting stock and details about whether undercuts,

transplants or containerised; the data are given according to the formula, labelling

age and the method of planting stock provided for in annex 7,



h) in the case of parts of plants, the year of collection and the specifications of the parts were removed.

used for the production of planting material,



I) intended use of the reproductive material,



j) quantity of reproductive material



to the customer) designation; for natural persons, the first name, surname,

where applicable, the trade name or name, address of the place of residence or

address of place of business, if different from the address of the place of residence,

legal persons, business name and address of the registered office [§ 8 paragraph 1 (b) (c))

the law].



(2) the records referred to in paragraph 1 may be replace archiving

each accompanying sheets if they meet the requirements of this

the registration of.



(3) the licence holder, who operates a forest nursery activities, leads

In addition to the data referred to in paragraph 1 also in written and video recording.



(4) the Written evidence referred to in paragraph 3 shall include:



and keep an up-to-date register of) each section rozpěstovaného

planting stock; If in the course of the cultivation section to change the

the total quantity of planting stock by more than 10% off

the previous situation, the supplier acquires and records an entry together with the

the increase or decrease in the amount of plant material,



(b)) in the nursery areas specification with an indication of the total area of forest

kindergarten, total production area, and the proportion of free area, greenhouses,

fóliovníků and hotbed and other areas,



c) inventory of each section of rozpěstovaného planting stock

with the status as of 31. December of each calendar year, with an indication



1. section,



2. the scientific name of the species and, where applicable, clone or clonal mixture,



3. the registration numbers of the units,



4. the age and species of seedlings or cuttings as planting stock and

information about whether undercuts, transplants or containerised; the data are

placed according to the formula and the way the growing age labelling of planting

material referred to in annex 7,



5. category of reproductive material



6. the quantities of planting material,



7. the production of the area for which the partition is grown.



(5) Video evidence referred to in paragraph 3 contains:



and graphic map of the nurseries) with the designation of the individual production

areas,



(b) State records rozpěstovaného) graphics of planting stock by

each section with updates to 31. December of each calendar

of the year,



(c)) visible marking individual sections on the desktop, forest nurseries.



(6) on each section of reproductive material in its possession to the 31.

December of the previous calendar year, or that the circulation until 31 December 2006.

December of the previous calendar year, the licensee shall submit

designee to 15. January of each calendar year, the records of the



and the Czech Republic and the scientific name) trees, or about making a clone or

Clonal mixture,



(b) the registration number of the units),



(c) the number of the certificate of origin),



d) year of ageing, in the case of seed units



e) age and type of seedlings or cuttings as planting stock and

information about whether undercuts, transplants or containerised, it comes to

planting stock; the data are given according to the formula, the labelling of the age and

the method of planting stock provided for in annex 7,



f) year subscription and taken part in the specification part of the plant (eg.

butt cuttings, tissue culture) used for the production of planting material,



g) purpose of use of the reproductive material,



h) quantity of reproductive material



I) customer, that during the reporting period, said reproductive material to

circulation; for natural persons, the first name, surname or business name


or the name, the address of the place of residence or the address of the place of business,

If different from the address of the place of residence, with legal entities, business

name and address of the registered office [§ 8 paragraph 1 (b) (c)) of the Act].



(7) the licence holder, who operates a forest nursery activities,

be submitted in addition to the data referred to in paragraph 3, the



and) specification in the nursery with an indication of the total area of forest

kindergarten, total production area, and the proportion of free area, greenhouses,

fóliovníků and hotbed and other areas,



(b)) the production area, which are grown under various sections of the

to paragraph 3.



section 16 of the



The details of the import notification of reproductive material



(To section 25a, paragraph 5, of the Act)



Notification to the importer on the importation of basic material, the customs authority

the Administration is considered a declaration containing details of the

importers, details of the quantities actually imported forest reproductive material

and the code of an import permit (1416) referred to in section 44 of the customs declaration.



§ 17



The effectiveness of the



This Decree shall take effect on the date of its publication.



Minister:



Ing. Palas in r.



Č. 1



cancelled



Č. 2



Parameters of planting seedlings capable of normal business

the quality of the



Č. 3



The parameters of the root system of plantation capable of planting stock

the usual commercial quality



Č. 4



Parameters of planting poplars normal commercial quality



Č. 5



Unacceptable defects, merchantable quality planting stock

------------------------------------------------------------------------------------------------------------------

Defects to prevent the plants Rod Rod Rod Rod Rod Hard Soft

considered as corresponding to the usual FIR, larch pine Douglas fir deciduous broadleaves poplar

commercial grade spruce

------------------------------------------------------------------------------------------------------------------

and young plants) with nezaceleným + + + + + + +

poraněním1)

------------------------------------------------------------------------------------------------------------------

(b)) stem Deformation (a strong curvature), 2) + + +

------------------------------------------------------------------------------------------------------------------

c) planting stock with multiple kmínky2) + + + + + + +

------------------------------------------------------------------------------------------------------------------

(d)) Stem with a few terminálními + + + +

stems (shoots with multiple terminals) 2)

------------------------------------------------------------------------------------------------------------------

(e)) and the branches of the insufficiently mature + 3) + 3) + 4)

------------------------------------------------------------------------------------------------------------------

f) Stem without healthy Terminal + 3) + 3) + 3) + 3)

similar to bud scales

------------------------------------------------------------------------------------------------------------------

g) missing or inadequate branching ++

------------------------------------------------------------------------------------------------------------------

h) strong, reducing the damage to the life + + +

size of the youngest vintage

------------------------------------------------------------------------------------------------------------------

I) damaged the root krček6) + + + + + + + 5)

------------------------------------------------------------------------------------------------------------------

j) damaged kořen6) + + + + + + + 5)

------------------------------------------------------------------------------------------------------------------

the main root of the heavily deformovaný2)) + + + + + +

------------------------------------------------------------------------------------------------------------------

l) missing or heavily poškozené2) + + + + + 7) +

fine roots

------------------------------------------------------------------------------------------------------------------

m) planting stock showing serious + + + + + + +

damage of harmful organisms

------------------------------------------------------------------------------------------------------------------

n) physiological damage as a result of + + + + + + +

desiccation, overheating, the occurrence of mold

2, etc.)

------------------------------------------------------------------------------------------------------------------

1) with the exception of wounds after removal of the superfluous shoots or

Double peaks, injury and wounds caused by the branch for the collection

cuttings

2) detailed description see CSN 48 2115 (applies to výsadbyschopnému

sadebnímu material)

3) if they were not plants taken from the nursery in the growing

period

4) with the exception of clones of Populus deltoides angulata and tacamahaca section

poplar trees and their hybrids

5) with the exception of seedlings of poplar zastřižených in kindergarten

6) with the exception of prýtových pulp

7) with the exception of red oak

------------------------------------------------------------------------------------------------------------------



The criteria must be assessed relative to the type of forest tree species

and given the suitability of planting stock for the purposes of afforestation.



Note: excludes plant of negotiable + quality.



Poplar seedlings do not have marketable quality if they show

also, any of the following defects:

and) their wood is more than 3 years,

(b)) have fewer than five well developed buds,

(c)) have other damage than forming slices.



Č. 6



Merchantable quality requirements for parts of plants



And merchantable quality) requirements for parts of plants with the exception of cuttings

Poplar



Parts of the plant have a merchantable quality if they do not show any of the

the following defects:



and shape deformation)



(b)) the lack of vitality,



c) inappropriate age and size for the purposes of reproduction,



d) signs of mechanical damage, including injury resulting from procurement section

plants, or abiotic or biotic damage factors.



(B)) the requirements for merchantable quality prýtových cuttings of poplar



and Cuttings of poplar) are merchantable quality if they achieve a minimum

dimensions and do not show any of the following defects:



1. their wood is more than 2 years,



2. have less than two well formed buds,



3. the necrosis or other damage to the contingent by the action of harmful

organisms,



4. signs of desiccation, overheating, rot or wilting.



(b)) minimum dimensions osních cuttings of poplar normal commercial quality

+-------+---------------------+-------------------------------------------+

| Class | Minimum length (m) | The minimum thickness at the top end (mm) |

+-------+---------------------+-------------------------------------------+

| And ^ a) | 0.20 | 8 |

+-------+---------------------+-------------------------------------------+

| (B) ^ a) | 0.20 | 10 |

+-------+---------------------+-------------------------------------------+

| THE LINKS AND THEIR SPECIFICATIONS: |

| ^ a) class B in the table indicate a higher quality osních cuttings than class and "|

+-------------------------------------------------------------------------+



(C)) the requirements for merchantable quality Woody cuttings of poplar



a) stem cuttings shall take one of the following defects, it is not possible

considered to be of fair marketable quality requirements:



1. their wood is more than three years,



2. cuttings have less than five well developed buds,



3. pulp showing necrosis or other damage caused by harmful

organisms,



4. they show signs of desiccation, overheating, mould or decay,



5. pulp exhibit other damage than forming cuts,



6. they have more on poles,



7. they have too much curvature.



(b)) size classes for sets:



+-------------------+-----------------------------+------------------------+

| Class | Minimum diameter at the Center | The minimum height |

| | (mm) | (m) |

+-------------------+-----------------------------+------------------------+

| The area with the exception of the Mediterranean |

+-------------------+-----------------------------+------------------------+

| N1 | 6 | 1,5 |

+-------------------+-----------------------------+------------------------+

| N2 | 15 | 3.00 |

+-------------------+-----------------------------+------------------------+

| The Mediterranean region |

+-------------------+-----------------------------+------------------------+

| S1 | 25 | 3.00 |

+-------------------+-----------------------------+------------------------+

| S2 | 30 | 4.00 |

+-------------------+-----------------------------+------------------------+".



Č. 7



Formula age and manner of labelling of planting stock cultivation



Way of growing is marked by the formula, where the first number represents the number of

vegetation period prior to the školkováním, podřezáváním or adjustment to

the package, the second number indicates the number of cycles after this intervention;


both are to the nearest 0.5 year. The sum of both numbers, for multiple times

školkovaných, offset or podřezaných plants and more numbers in the

the formula is growing in the nursery with the exception of řízkovanců poplar,

which was classified in the above-ground part.



Way of growing is marked by the formula, where different symbols indicate:



+ školkování or planting in a container;



-undercutting roots;



(f) growing in artificial cover (a hotbed, greenhouse, fóliovník);



for the cultivation of krytokořenného of planting forest tree species without

using the technology of cutting through the air (without the cultivation of the "air

the pillow ");



in growing planting stock krytokořenného cutting technology

Air (growing on the "hover");



p pickup from the natural regeneration;



from the roots;



r řízkovanec;



t řízkovanec poplar;



with štěpovanec (roubovanec or očkovanec);



e explantát (in vitro).



Age and the method of growing seedlings of poplar and willow trees from vegetative

propagation is referred to by the formula, where the first number indicates the age of the aboveground part of the

seedlings, the second number indicates the age of the underground part of the seedlings, IE. the sum of the

both numbers does not specify the total age of seedlings and the + sign between the first and second

the number doesn't mean transplanting or školkování (see example 7 in the

the following text).



Samples indicate ways of planting stock cultivation of forest

tree species:



Example 1



0.5-0.5 is one-year prostokořenná seedlings grown in uncovered

mineral soil; prostokořennému semenáčku was during the growing

period of podřezán the root system.



Example 2



F1 + v1 is a two-year krytokořenná seedlings; one-year prostokořenný

seedling grown in artificial cover was whisked away and placed into a container, in which

the plant was grown technology one year cut through the air.



Example 3



R1 + k1 is a two-year krytokořenná seedlings obtained by vegetative propagation

by cuttings; one year zakořeňovaná plant was přesazena to

prorůstavého type of packaging in which it was grown for one year without the use of

the technology of cutting through the air.



Example 4



PV1 + 2-1 + k1 is a five-year krytokořenný odrostek; a one-year

krytokořenný seedling grown in artificial cover trim technology

the air was přeškolkován to exposed mineral soil, after two years he was

podřezán to the plant root system, the plant was after one year

picked up and přesazena in the packaging in which it was grown for one year without

using the technology of cutting through the air.



Example 5



2 + 0 is a two-year prostokořenný seedling grown in uncovered

mineral soil.



Example 6



p + 0 seedling vyzvednutý of natural regeneration (age not mentioned).



Example 7



T1 + 2 is obtained by cuttings of poplar seedlings prostokořenná with a one-year

the above-ground parts (after the first year of the cut) and a two-year underground parts.



Example 8



p + z1 is the prostokořenná seedlings; seedling, which was collected from

natural regeneration, one year zakořeňoval (age vyzvednutého semenáčku

is not mentioned).



Example 9



p + 2 is the prostokořenná seedlings; from the natural regeneration vyzvednutý

He was for two years a seedling of zaškolkován vyzvednutého semenáčku (age of the

does not mention).



Example 10?



F1 + 0 is one-year old prostokořenný seedling cultivated in artificial cover.



Example 11



PV1 + 0 is one-year old krytokořenný seedling cultivated in artificial cover

"air cushion". ".



Č. 8



cancelled



Č. 9



PATTERN



Announcement of the collection of seed, taking parts of plants or

picking plants from natural regeneration, or about the venue

Subscribe parts of plants, in the case of vegetative reproductive množený subsequently

material, or to merge the partitions of the reproductive material *)



Number: year:



Pobočka pověřené osoby: .......................................................................................

---------------------------------------------------------------------------------------------------------------



1) Designation of the supplier:



for natural persons:

name:........................:................................ date of birth:................

business name or name:................................................................................

address of the place of residence:.............................................................................

address of place of business, if different from the address of permanent residence:.............................................

...........................................................................................................

for legal persons:

business name or name:................................................................................

adresa sídla: .............................................................................................

2) supplier ID number, if assigned:........................................................

3) license No.................................................... became legally can...............

The number of single registry:...........................

4) Místo sběru: ..............................................................................................

(indication of units of spatial distribution of the forest or the name of the cadastral territory and parcel number)

5) region of provenance:................................................................. number: ... ... ... ... ... ...

6) kind of woody plants: a) a Czech name:...........................................................................

b) vědecký název: .........................................................................

(c)) indicate a clone or clonal mixture:.......................................................

7) reproductive material of the category: *) identified-selected-qualified-tested

8) kind of reproductive material: *) seed-plant parts-planting stock

9) type of basic material: *) seed source-stand phenotypic classes: A, B, C-seed

sad-parent families-ortet-clone-mixture

10) registration number units:........................................................................

11) estimated date of collection: ... ... ... ... ... ... ... ... ... ... ... ... to:..................................

12) maximum amount Planned:.............................................................................

13) the owner of the basic material: name......................... last name.........................

business name or the name.................................................................................

address of the place of residence or the address of the place of business, if different from the address of permanent residence or address

sídla: ....................................................................................................

telefon: .............................................. e-mail: ...........................................

14) consent of the owner of the collection, unless the owner of the supplier itself.............................................



Officially certified signature of the owner of the source:



V .............. dne ............. Signature (stamp) of the vendor:..........................



*) Delete where inapplicable.



In the case of multiple sections, including a request for merge partitions, you can identify the individual partitions on multiple annexes-

počet a seznam příloh: ....................................................................................".



Č. 10



PATTERN



The request for the issue of a certificate of origin of the reproductive material



Number: year:



Pobočka pověřené osoby: ......................................................................................

---------------------------------------------------------------------------------------------------------------

1) Designation of the supplier:

for natural persons:

name:......................:................................ date of birth: ... ... ... ... ... ... ...

business name or name:.................................................................................

address of the place of residence:............................................................................

address of place of business, if different from the address of permanent residence:..............................................

............................................................................................................

for legal persons:

business name or name:.................................................................................

adresa sídla: ..............................................................................................

2) supplier ID number, if assigned:.........................................................

3) license No................................................ became legally can...................

The number of single registry:...........................

4) vendor request is related to the announcement of the capture of seed, taking parts of plants or

picking plants from natural regeneration, or sampling of the parts of the plants if it subsequently

vegetative reproductive material * množený)

číslo: ............................... ze dne: ...................

5) quantities of seed:............... kg


the amount of other reproductive material: butt-leaf-root cuttings, tissue culture and embryo, eyelets,

layers, roots, cuttings, rods, and other parts of plants, planting stock................... DC

6) Datum sběru: ................................................................................................

7) region of provenance:................................................................ number: ... ... ... ... ....

8) the type of trees: a Czech name):.............................................................................

b) vědecký název: .............................................................................

(c)) indicate a clone or clonal mixture:...........................................................

9) reproductive material of the category: *) identified-selected-qualified-tested

10) kind of reproductive material: *) seed-plant parts-planting stock

11) type of basic material: *) seed source-stand phenotypic classes: A, B, C-seed packs-parent

family-ortet-clone-mixture

12) origin: *) autochthonous-neautochtonní-neautochtonní neindigenní of the indigenous area...................-unknown

13) altitudinal range:.........

14) registration number units:........................................................................

15) this is a genetically modified material: *) Yes-No

16) intended use: *) for the recovery of the forest and afforestation-for the special purpose of the forestry

17) year of maturation, in the case of seed:...........................................

18) age and the method of cultivation, in the case of planting stock:...........................................



V ............................... dne .............. Signature (stamp) of the vendor:.....................



*) Delete where inapplicable. ".



Annex 11a



cancelled



Annex 11b



PATTERN



The request for the issue of a certificate of origin of basic material for a section

merging partitions



Number: year:



Pobočka pověřené osoby: .......................................................................................

---------------------------------------------------------------------------------------------------------------

1) Designation of the supplier:

for natural persons:

name:..........................:............................ date of birth:...................

business name or name:.................................................................................

address of the place of residence:..............................................................................

address of place of business, if different from the address of permanent residence:..............................................

............................................................................................................

for legal persons:

business name or name:.................................................................................

adresa sídla: ..............................................................................................

2) supplier ID number, if assigned:.........................................................

3) license No.................................................... became legally can................

The number of single registry:...........................

4) vendor request applies to these merge sections:

and the certificate of origin) number:..............................., dated:................ issued:........

............................................................................................................

quantities of seed:............... kg

the amount of other reproductive material: *) butt-leaf-root cuttings, tissue culture and embryo, eyelets,

layers, roots, cuttings, rods, and other parts of plants, planting stock..................... DC

registration number units:.........................................................................

(b)) to the pedigree certificate number:............................., dated:................. issued:.........

............................................................................................................

quantities of seed:............... kg

the amount of other reproductive material: *) butt-leaf-root cuttings, tissue culture, and embryos,

the buds, layers, roots, cuttings, rods, and other parts of plants, planting stock............... DC

registration number units:.........................................................................

(c)) to the pedigree certificate number:.............................., dated:................. issued:........

............................................................................................................

quantities of seed:............... kg

the amount of other reproductive material: *) butt-leaf-kořenovéřízky, tissue culture and embryo, eyelets,

layers, roots, cuttings, rods, and other parts of plants, planting stock.............. DC

registration number units:.........................................................................

(d)) to the pedigree certificate number:.............................., dated:................. issued:........

............................................................................................................

quantities of seed:............... kg

the amount of other reproductive material: *) butt-leaf-kořenovéřízky, tissue culture and embryo, eyelets,

layers, roots, cuttings, rods, and other parts of plants, planting stock.............. DC

registration number units:.........................................................................

e) when more than four sections give more to a separate annex.

5) region of provenance:................................................................. number: ... ... ... ... ...

6) kind of woody plants: a) a Czech name:..............................................................................

b) vědecký název: ............................................................................

(c)) indicate a clone or clonal mixture:..........................................................

7) reproductive material of the category: *) identified-selected-qualified-tested

8) kind of reproductive material: *) seed-plant parts-planting stock

9) type of basic material: *) seed source-stand phenotypic classes: A, B, C-

seed kits-parent families-ortet-clone-mixture

10) origin: *) autochthonous-neautochtonní-neautochtonní neindigenní of the indigenous area................-unknown

11) altitudinal range:.........

12) this is a genetically modified material: *) Yes-No

13) intended use: *) for the recovery of the forest and afforestation-for the special purpose of the forestry

14) years of maturation, in the case of seed:.....................................................................

15) age and the method of cultivation, in the case of planting stock:.........................................................

16) Seznam příloh: .............................................................................................

............................................................................................................

............................................................................................................

............................................................................................................



V ......................... dne ............. Signature (stamp) of the vendor:...................................



*) Delete where inapplicable.



Č. 12



A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL

ORIGINATING FROM A SEED SOURCE AND OF



ISSUED IN ACCORDANCE with DIRECTIVE 1999/105/EC

--------------------------------------------------------------------------------------------------------------------

MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)

CZ/...................................................^1)

--------------------------------------------------------------------------------------------------------------------



We confirm that the below described forest reproductive material was produced:

According to the EC directive

under the transitional provisions of the EC directive



1. Name: ^ 2)....................................... Scientific name: ^ 2).....................................



2. type of reproductive material

seed

parts of plants

planting stock

3. Category of reproductive material

source-identified

selected source

test source



4. The type of basic material

seed source

the vegetation



5. Účel použití:^3) ................................................................................................



6. National Register reference or identification of the basic material in the national register: ^ 4)

..................................................... / směs: ..................................................



7. the autochthonous neautochtonní unknown

indigenous neindigenní



8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):.....................


................................................................................................................



9. the countries of the region of provenance and the basic material: ^ 5)....................................................

................................................................................................................



10. Altitude, respectively. altitudinal range habitat of the basic material: ^ 6)..............................

................................................................................................................



11. Rok zrání osiva:^7) .............................................................................................



12. the quantity of reproductive material: ^ 8)............................................................................



13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, for which it was previously

EC issued? Yes No

No prior confirmation............................................ The amount of the original section................



14. the period of cultivation in the nursery: ^ 9)....................................................................................

................................................................................................................



15. the material has already been obtained from the seeds subsequently vegetatively reproduced? Yes No

Method of reproduction ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Početrozmnožovacích cycles...............



16. Other relevant information:......................................................................................



17. the supplier: ^ 10)



The name and address of the official agency: official agency Stamp Name of the person responsible:



Date: Signature:

--------------------------------------------------------------------------------------------------------------------



Explanatory notes:



1) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:

+------------------------------+----------------------------+

| The name of a branch of an authorised person | The code of the branch of an authorised person |

+------------------------------+----------------------------+

| FMI headquarters | 100 |

| Branch Office in Stará Boleslav | 201 |

| Branch Office České Budějovice | 202 |

| Pilsen | 203 |

| Jablonec nad Nisou | 204 |

| Branch Office Hradec Králové | 205 |

| Branch Office Brno | 206 |

| Branch Frýdek-Místek | 207 |

| Branch Office Olomouc | 208 |

| branch of Kroměříž | 209 |

+------------------------------+----------------------------+



Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.

In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law

the branch of an authorised person instead of the code, the code "9999"

(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)

2) enter the Czech and the scientific name of the species.

3) Indicate either the purpose of the "forest", or for "other purposes".

4) enter the registration number of the unit.

5) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic, PLO 7-Brdská).

6) enter the altitude or the number of the forest vegetation of the degree. (Example: 1000 m or LVS 7.)

7) indicate the year in which the ripening of the seed (raw materials). In the case of trees such as SM, BO, MD, if collecting cones

performed at the beginning of the new year, it is stated as the year of the maturation of the year preceding. All the years of maturation, from

of which it is the merged partition.

8) in the case of seed, the amount shall be entered in kilograms with a precision

to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants

material and parts of plants, the number of pieces with a precision of one piece.

9) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.

10) in the case of natural persons:

Name, surname, date of birth, business name or the name, place of residence (address), the location (address) of the business

(if different from place of residence) and the number of single vendor registry.

In the case of a legal person shall indicate:

Business name, address of company headquarters and address of place of business (if different from company address), the number of single

vendor registry.



Č. 13



A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL

ORIGINATING in the SEMENN0HO SET of parents and families (Y) 1)

ISSUED IN ACCORDANCE with DIRECTIVE 1999/105/EC

-----------------------------------------------------------------------------------------------------------------------

MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)

CZ/.......................................................^1)

-----------------------------------------------------------------------------------------------------------------------



We confirm that the below described forest reproductive material was produced:

According to the EC directive

under the transitional provisions of the EC directive



1. a) Czech name: ^ 3)....................................... Scientific name: ^ 3)......................................

(b)) the name of the basic material (according to the data in the registry):................................................



2. type of reproductive material

seed

parts of plants

planting stock



3. Category of reproductive material

qualified resource

test source

4. The type of basic material

seed Orchard

parents of family(ies)



5. Účel použití:^4) ...................................................................................................



6. National Register reference or identification of the basic material in the national register: ^ 5)

...................................................................................................................



7. (if applicable) the autochthonous neautochtonníneznámý

indigenous neindigenní



8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):........................

...................................................................................................................



9. the countries of the region of provenance and the basic material: ^ 6).......................................................

...................................................................................................................



10. Seed of: free pollination

additional pollination

artificial pollination



11. Year of ripening seeds: ^ 7).........................................



12. the quantity of reproductive material: ^ 8)................................................................................



13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, which has been previously exposed to the

confirmation of the EC? ano ne ano ne

No prior confirmation........................................ The amount of the original section.......................



14. the period of cultivation in the nursery: ^ 9) 15. The number of components represented:

.......................................... rodiny ................................................

.......................................... klony ................................................



16. Altitude respectively. altitudinal range habitat of the basic material:....................................



17. the basic material Was obtained by using genetic modification yes no



18. in the case of reproductive material obtained from parents of family(ies):

Method of reproduction:................................. Percentage composition of families that make up the component..............



19. It was no longer a material obtained from the seeds subsequently vegetatively reproduced? Yes No

Method of reproduction ... ... ... ... ... ... ... ... ... ... .... The number of reproductive cycles...................................



20. Other relevant information:.........................................................................................



21. the supplier: ^ 10)



The name and address of the official agency: official agency Stamp Name of the person responsible:



Date: Signature:

-----------------------------------------------------------------------------------------------------------------------



Explanatory notes:



1 Parent family) within the meaning of section 2 of the letter g) of section 4 of Act No. 149/2003 Coll.

2) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:

+------------------------------+----------------------------+

| The name of a branch of an authorised person | The code of the branch of an authorised person |

+------------------------------+----------------------------+

| FMI headquarters | 100 |

| Branch Office in Stará Boleslav | 201 |

| Branch Office České Budějovice | 202 |

| Pilsen | 203 |


| Jablonec nad Nisou | 204 |

| Branch Office Hradec Králové | 205 |

| Branch Office Brno | 206 |

| Branch Frýdek-Místek | 207 |

| Branch Office Olomouc | 208 |

| branch of Kroměříž | 209 |

+------------------------------+----------------------------+



Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.

In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law

the branch of an authorised person instead of the code, the code "9999"

(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)

3) enter the Czech and the scientific name of tree species.

4) shall be either the purpose of the "forest", or for "other purposes".

5) enter the registration number of the unit.

6) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic, PLO 7-Brdská

Highlands).

7) indicate the year in which the ripening of the seed (raw materials). In the case of trees such as SM, BO, MD, if collecting cones

performed at the beginning of the new year, it is stated as the year of the maturation of the year preceding. All the years of maturation, from which

originated the merged partition.

8) in the case of seed, the amount shall be entered in kilograms with a precision

to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants

material and parts of plants, the number of pieces with a precision of one piece.

9) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.

10) in the case of natural persons:

Name, surname, date of birth, business name or the name, place of residence (address),

location (address) of business (if different from place of residence) and the number of single vendor registry.

In the case of a legal person shall indicate:

Business name, address of company headquarters and address of place of business (if different odadresy company headquarters),

the number of single vendor registry.



Č. 14



A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL

ORIGINATING FROM CLONES OR CLONAL MIXTURES

ISSUED IN ACCORDANCE with DIRECTIVE 1999/105/EC

-----------------------------------------------------------------------------------------------------------------------

MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)

CZ/.......................................................^1)

-----------------------------------------------------------------------------------------------------------------------



We confirm that the below described forest reproductive material was produced:

According to the EC directive

under the transitional provisions of the EC directive



1. a) Czech name: ^ 2)....................................... Scientific name: ^ 2)......................................



(b)) Designation of clones or clonal mixtures:..............................................................................



2. type of reproductive material

parts of plants

planting stock



3. Category of reproductive material

qualified resource

test source



4. The type of basic material

clones

Clonal mixture



5. Účel použití:^3) ..................................................................................................

6. National Register reference or identification of the basic material in the national register: ^ 4)

..................................................................................................................



7. (if applicable) the autochthonous neautochtonní unknown

indigenous neindigenní



8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):.......................

..................................................................................................................



9. the countries of the region of provenance and the basic material: ^ 5)......................................................

..................................................................................................................



10. the basic material Was obtained by using genetic modification yes no



11. a) Metoda reprodukce: ..........................................................................

(b)) the number of reproductive cycles:...........................................................



12. the quantity of reproductive material: ^ 6)..............................................................................



13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, which has been previously exposed to the

confirmation of the EC? ano ne ano ne

No prior confirmation........................................ The amount of the original section.......................



14. the period of cultivation in the nursery: ^ 7)..................................................................



15. For clonal mixtures:

The number of clones in the mixture:..................................... The percentage of individual clones...............



16. Other relevant information:........................................................................................



17. the supplier: ^ 8)



The name and address of the official agency: official agency Stamp Name of the person responsible:



Date: Signature:

-----------------------------------------------------------------------------------------------------------------------



Explanatory notes:



1) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:

+------------------------------+----------------------------+

| The name of a branch of an authorised person | The code of the branch of an authorised person |

+------------------------------+----------------------------+

| FMI headquarters | 100 |

| Branch Office in Stará Boleslav | 201 |

| Branch Office České Budějovice | 202 |

| Pilsen | 203 |

| Jablonec nad Nisou | 204 |

| Branch Office Hradec Králové | 205 |

| Branch Office Brno | 206 |

| Branch Frýdek-Místek | 207 |

| Branch Office Olomouc | 208 |

| branch of Kroměříž | 209 |

+------------------------------+----------------------------+



Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.

In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law

the branch of an authorised person instead of the code, the code "9999"

(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)

2) enter the Czech and the scientific name of the species.

3) Indicate either the purpose of the "forest", or for "other purposes".

4) enter the registration number of the unit.

5) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic, PLO 7-Brdská

Highlands).

6) in the case of seed, the amount shall be entered in kilograms with a precision

to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants

material and parts of plants, the number of pieces with a precision of one piece.

7) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.

8) in the case of natural persons:

Name, surname, date of birth, business name or the name, place of residence (address), the location (address)

business address (if different from place of residence) and the number of single vendor registry.

In the case of a legal person shall indicate:

Business name, address of company headquarters and address of place of business (if different odadresy company headquarters), the number

single vendor registry.



Annex 14a



A CERTIFICATE OF ORIGIN, CERTIFYING THE IDENTITY OF THE REPRODUCTIVE MATERIAL

RESULTING FROM THE MERGING OF SECTIONS OF THE REPRODUCTIVE MATERIAL



ISSUED further to the Directive 1999/105/EC

-----------------------------------------------------------------------------------------------------------------------

MEMBER STATE OF THE UNITED STATES OF AMERICA CONFIRMATION OF EC NO:/(KÓDČLENSKÉHO)/(NO)

CZ/......................................................^1)

-----------------------------------------------------------------------------------------------------------------------



We confirm that the below described forest reproductive material was produced:

According to the EC directive

under the transitional provisions of the EC directive



1. Český název:^2) ......................................... Scientific name: ^ 2)..........................................



2. type of reproductive material

seed

planting stock



3. Category of reproductive material

source-identified

selected source

qualified resource



4. The type of basic material

seed source

the vegetation

seed Orchard



5. Účel použití:^3) ....................................................................................................




6. Individual partitions to be merged:

-----------------------------------------------------------------------------------------------------------------------

The number of the certificate of origin, the identification of the basic material Quantities Year maturation

(registration number units)

-----------------------------------------------------------------------------------------------------------------------



-----------------------------------------------------------------------------------------------------------------------



-----------------------------------------------------------------------------------------------------------------------



-----------------------------------------------------------------------------------------------------------------------



-----------------------------------------------------------------------------------------------------------------------



-----------------------------------------------------------------------------------------------------------------------

The new registration number recognised

units for the merged partition:

-----------------------------------------------------------------------------------------------------------------------



7. the autochthonous neautochtonní unknown

indigenous neindigenní



8. the origin of basic material (for neautochtonní/neindigenní material, if this is known):.........................

...................................................................................................................

9. the countries of the region of provenance and the basic material: ^ 4)........................................................

...................................................................................................................

10. Altitude, respectively. altitudinal range habitat of the basic material: ^ 5).................................

...................................................................................................................

11. Rok zrání osiva:^6) ................................................................................................



12. the quantity of reproductive material: ^ 7)...............................................................................



13. Is the material to which it is exposed to this sheet, the result of a division of a larger section, for which it was previously

EC issued? Yes No

No prior confirmation.............................................. The amount of the original section................



14. Doba pěstování ve školce:^8) .......................................................................................

...................................................................................................................



15. any other relevant information:.........................................................................................

16. the supplier: ^ 9)



The name and address of the official agency: official agency Stamp Name of the person responsible:



Date: Signature:

-----------------------------------------------------------------------------------------------------------------------



Explanatory notes:



1) AU (the code of the Member State)/authorized person/branch code serial number/year, kdekódy branch of an authorised person are:

+------------------------------+----------------------------+

| The name of a branch of an authorised person | The code of the branch of an authorised person |

+------------------------------+----------------------------+

| FMI headquarters | 100 |

| Branch Office in Stará Boleslav | 201 |

| Branch Office České Budějovice | 202 |

| Pilsen | 203 |

| Jablonec nad Nisou | 204 |

| Branch Office Hradec Králové | 205 |

| Branch Office Brno | 206 |

| Branch Frýdek-Místek | 207 |

| Branch Office Olomouc | 208 |

| branch of Kroměříž | 209 |

+------------------------------+----------------------------+



Editor's note. Powers of the individual branches of authorised persons within the regions is provided in annex No. 20 of this Decree.

In the case of the issuance of a certificate of origin on the reproductive material imported from third countries pursuant to Section 25b of the law

the branch of an authorised person instead of the code, the code "9999"

(Example: CZ/205/21/2014 = Czech Republic/Hradec Králové branch code/serial number 21/2014)

2) enter the Czech and the scientific name of the species.

3) Indicate either the purpose of the "forest", or for "other purposes".

4) enter the "Czech Republic" and the number and name of the natural forest area (example: Czech Republic,

PLO 7-Brdská).

5) enter the altitude or the number of the forest vegetation of the degree. (Example: 1000 m or LVS 7.)

6) indicate the year in which the ripening of the seed (raw materials). In the case of the SM, BO dřevinjako, MD,

If collecting cones performs at the beginning of the new year, as the maturing of the previous year. Provide all

years of maturation, from which arose the merged partition.

7) for quantities shall be the following:

in the case of raw materials: raw materials to the nearest kg 1 kg [example: raw materials (cones)-157 kg],

in the case of seed: seed to the nearest kg 3 decimal places,

in the case of plants from natural regeneration or parts of plants: the pieces with a precision of 1 piece.

7) in the case of seed, the amount shall be entered in kilograms with a precision

to three decimal places with the distribution of the raw material (pine cones, berries and fruit) and, in the case of seed plants

material and parts of plants, the number of pieces with a precision of one piece.

8) age and the method of cultivation; Enter the appropriate growing formula according to annex 7 of this Ordinance.

9) in the case of natural persons:

Name, surname, date of birth, business name or the name, place of residence (address),

location (address) of business (if different from place of residence) and the number of single vendor registry.

In the case of a legal person shall indicate:

Business name, address of company headquarters and address of place of business (if different odadresy company headquarters), the number

single vendor registry.



Annex 15



cancelled



Č. 16



_________________

*) Note. ASPI: Endnote 2), 4 points), 7, 9)) and 10) is added:

2) in the case of a natural person, the name and surname, or business

company or name, address of residence, address, place of business, if different from the address of the place of

permanent residence, and the number of the single registry, if it has been allocated. In the case of a legal person shall bear the

business name, address of the registered office and number of the single registry, if it has been allocated.

4) enter the Czech and the scientific name of the species.

7) enter the abbreviation for the relevant source, and it WS (seed source), after (the stand), SS (seed set), RR (parents family)

KL/clone), SK (mixture), OR (ortet)

9) enter the abbreviation of one of the options: A (autochthonous), NAI (neautochtonní non-indigenous), NAN-... (neautochtonní

neindigenní from the region of provenance-with no hyphen), N (unknown).

10) indicate the quantities of seed in kilograms with a precision of three decimal places with the distribution of

on the raw material (pine cones, infructescenses, fruits) and seed.



Č. 17



_________________

*) Note. ASPI: Endnote 2), 4 points), 7, 9)) and 12):

2) in the case of a natural person, the name and surname, or business

company or name, address of residence, address, place of business, if different from the address of the place of

permanent residence, and the number of the single registry, if it has been allocated. In the case of a legal person shall bear the

business name, address of the registered office and number of the single registry, if it has been allocated.

4) enter the Czech and the scientific name of the species.

7) enter the abbreviation for the relevant source, and it WS (seed source), after (the stand), SS (seed set), RR (parents family)

KL/clone), SK (mixture), OR (ortet)

9) enter the abbreviation of one of the options: A (autochthonous), NAI (neautochtonní non-indigenous), NAN-... (neautochtonní

neindigenní from the region of provenance-with no hyphen), N (unknown).

12) enter the designation N1 classification in accordance with annex 6 part C of this Ordinance.



Č. 18



_________________

*) Note. ASPI: Endnote 2), 4 points), 7) and 9):

2) in the case of a natural person, the name and surname, or business

company or name, address of residence, address, place of business, if different from the address of the place of

permanent residence, and the number of the single registry, if it has been allocated. In the case of a legal person shall bear the

business name, address of the registered office and number of the single registry, if it has been allocated.

4) enter the Czech and the scientific name of the species.

7) enter the abbreviation for the relevant source, and it WS (seed source), after (the stand), SS (seed set), RR (parents family)

KL/clone), SK (mixture), OR (ortet)

9) enter the abbreviation of one of the options: A (autochthonous), NAI (neautochtonní non-indigenous), NAN-... (neautochtonní

neindigenní from the region of provenance-with no hyphen), N (unknown).



XIII. 19



The criteria for the classification of wood in the stands of the phenotypic classes



1. Information about the origin of the



According to documents from earlier times or other appropriate means

(distribution of trees in the vegetation, terrain inaccessibility) is needed

to determine whether this is a cropping of the autochthonous, or neautochtonní

known or unknown origin.



Growths of phenotypic classes and should be autochthonous or at least


probably autochthonous. This class can be used to classify the vegetation

neautochtonní, if the quantity of production stand out for their quality, durability,

or other valuable properties.



Growths of phenotypic class B may be autochthonous and neautochtonní

known or unknown origin.



2. Volume production



Growths of phenotypic classes A and B must have a volume production (volume

growth of wood) is greater than the mean value is valid for the

comparable environmental and economic conditions.



3. morphological characters



Trees in stands phenotypic classes A and B shall have appropriate

morphological characters, in particular the straightness, plnodřevnost, circular cross-section

the tribe, the appropriate type of branching and good natural cleaning tribe.

The proportion of dvojáků and spiral strains should be minimal.



4. the health and potential of-resistance:



Trees in stands phenotypic classes A and B shall not be contaminated by the harmful

agents and must be resistant to unfavourable to the Habitat and climate

conditions on the site-with the exception of damage caused by pollution

the environment and must be adapted to the ecological conditions in the

region of provenance.



5. The quality of the wood:



The quality of the wood it is necessary to take into account: in individual cases may

be an essential criterion for selection.



6. Vegetation phenotypic class C



Growths of phenotypic class C show the average economic value and less

in good health. for the tree species listed in § 3, paragraph 2

of law, stands this category not seeds (these growths, however,

can restore natural regeneration), other tree species is recovered,

If they are recognized as the source identified.



7. Forests phenotypic class D



Growths of phenotypic class D are genetically and economically inappropriate

(below average economic value), or are clearly

impaired health or significantly impaired stability.

Harvested seed from them and it is not it is possible to restore the natural regeneration;

These growths should be gradually renew and replace them with stands

genetically more valuable.



XIII. 20



Track registration number recognised, the importance of its individual units

components and the designation of public authorities



Identification number of the unit has the following composition:



CZ-2-3-DBZ-00005-06-7-and-G999-1



The meaning of each character:



1.) CZ = the Czech Republic mark (according to the international regulation ISO

3166-1, two-character).



2.) code number of the categories of forest reproductive material (character values: 1 =

identified, 2 = selected, 3 = 4 = qualified, tested,

single character).



3.) code number of the source type [character values: 1 = seed source, 2A =

phenotypic classes and vegetation, 2B = vegetation B, 2 c class phenotypic = crop

phenotypic class C (for international use shall be single-character 2

= the crop), 3 = seed sets, 4 = parent families, 5 = ortet, clone, 6 = mixture

Clones (max. two-character)]. The RM source categories IDENTIFIED by the

resulting from the merger of crops and seed sources are it's numeric type code

source 1 = seed source.



4.) Stands tree species. For domestic use (a maximum of Czech

three-character given to designated person). For international use

scientific (according to character values: Commission Regulation (EC) no 1597/2002, the three-digit

character).



5.) the source sequence number (assigned by the designated officer, a five-digit character).



6.) a numeric code for region of provenance (character values: according to annex No 1

Decree No. 83/1996 Coll., dvojmístný character).



7.) the code number in the height range (character values: forest vegetation level

pursuant to section 2 of this order, single character). In the case of seeds of the category

IDENTIFIED growing outside the forest lays down the code of the height, the designated zone

person pursuant to § 2 (2). 1 of this order.



8.) designation of the County in which the unit is situated is recognised (character values

According to column 3 of the following table, single character).



9.) designation of units located in gene base

(values: G = gene symbol base, 999-1 = five-digit code

assigned responsible person). Indication code gene base in the recognised

the unit is in accordance with the code designation of gene bases assigned

responsible person according to § 13 para. 5 of this order.



Designation of the County in which the unit is situated is recognised and the scope of the

the branch of an authorised person



+----------------------------+----------------+------------------------------------+

| Name of region | The designation of the region | Branch of an authorised person |

+----------------------------+----------------+------------------------------------+

| The capital city Prague | A | Stará Boleslav |

| Central Bohemian Region | S | Stará Boleslav |

| South Bohemian Region | C | České Budějovice |

| The Czech Republic | P | Pilsen |

| Region Of Karlovy Vary | K | Pilsen |

| Ústí Nad Labem Region | U | Jablonec nad Nisou |

| The Liberec Region | L | Jablonec nad Nisou |

| Hradec Králové Region | H | Hradec Králové |

| Pardubice Region | E | Hradec Králové |

| Vysočina Region | J | Brno |

| South Moravian Region | B | Brno |

| Olomouc Region | M | Olomouc |

| The Moravian-Silesian Region | T | Frydek-Mistek |

| Zlín Region | Z | Kroměříž |

| military újezdy | V | According to territorial jurisdiction to the edge |

+----------------------------+----------------+------------------------------------+



Č. 21



PATTERN



XIII. 22



Requirements for the approval of basic material resources selektovaného



The growths, which are to be recognised as the basic material

In addition to the selected category must meet the requirements for inclusion in the

phenotypic classes A or B referred to in annex # 19 meet at the same time

the following requirements:



1. Isolation:



Stands must be situated at a sufficient distance from the inappropriate stands

of the same species or from crops of related species or varieties with

these species can interbreed.



Growths of phenotypic class D genetically and economically inappropriate may not be

be located closer than 100 m from recognised stands phenotypic class B and 200 m

from recognised phenotypic classes and crops.



2. the size of the crop:



The total area of vegetation proposed for certification must have a minimum of 1 ha.

A smaller area of the stands may be incurred to the proprietary or

the technical division of the stands, before this splitting larger than 1 ha.

Furthermore, in the case of the remains of an extremely valuable stocks. The number of trees

tree species that is the subject of the recognition, however, must not fall below 40 PCs.

Stand with an area of less than 1 ha, may be accepted only if its recognition

recommended that the expert opinion of an authorised person.



3. the age and stage of development:



You can recognise the stands of alder, birch, poplar, willow, crane, PEAR polničky and

Apple tree forest legacy 20 years, Elm, walnut, Douglas fir, FIR of mention

huge, pines, cherry and kaštanovníku of edible

the older 40 years and other tree species stands over 60 years.



4. Homogeneity:



Stands must show a normal degree of individual variability

morphological characters. Inappropriate trees should be, if necessary,

delete.



5. Adaptation:



It must be obvious that the vegetation is adapted to the ecological conditions in the

region of provenance.



6. Species purity:



In the case of closely related species (e.g. summer and oak

the winter) is assessed species purity (the representation of individual species in the

the crop).



7. origin:



According to documents from earlier times or other appropriate means is

needed to establish whether it is autochthonous, non-indigenous

neautochtonní neautochtonní neindigenní, an indigenous or unknown; u

crop neautochtonního neindigenního it should be noted the origin (area

provenance).



8. the minimum population size:



Stands must consist of one or more groups of well spaced

trees of recognized species, which are large enough to ensure

species sprášení. To avoid adverse effects of

the crossing must chosen sufficiently large number of stands and the density of the

individual trees recognized species on a particular area.



Č. 23



PATTERN



Annex to the application for the recognition of the basic material-request for

recognition of the seed source or for source identiofikovaného

of reproductive material



Explanatory notes:



1 serial number



2 an abbreviation of trees up to three-digit character of Bohemia (assigned responsible

a person)



3 region of provenance = natural forest area



4 altitudinal range = forest vegetation; for the seed source, which is

outside of the land intended for the performance of functions of the forest (PUPFL), the designated officer shall determine



5 origin: A = autochthonous



NAI = indigenous neautochtonní



NaN-... = neautochtonní # neindigenní from the region of provenance ... ...



N = unknown



6 age (years)-at the stand of the LHP (LHO), at the source of the seeds of the qualified

an estimate of the



7 Marking stand (the lowest unit of the 3-d distribution of the forest);

the structure of the stand number: Department/Panel/stand/stand group



7A Zakmenění from the new FOREST MANAGEMENT PLAN (LHO); for seed sources must not be used



7B Representation of new wood species LHP (LHO); for seed sources must not be used



the area of the entire crop of 8 new LHP (LHO); for seed sources are

does not fill



9 Reduced the area recognized by the trees from the new FOREST MANAGEMENT PLAN (LHO); This is calculated as


the actual area of each deck multiplied by zakmeněním and representation (example: 1.50

x 0.9 x 0.80 = 1.08 ha; where the actual area of each deck is 1.50 ha, zakmenění

It is 0.9 and representation is 0.80); for seed sources must not be used



10 Phenotypic class (A, B or C); for seed sources must not be used



11 number and the name of the cadastral territory



12 a parcel number



13 the number of tree seed source



14 Note (to crops and seed source)



Č. 24



cancelled



Č. 25



PATTERN



Annex to the application for the recognition of the basic material-request for

recognition for the source of the selektovaného or of tested reproductive

material



Explanatory notes:



1 serial number



2 an abbreviation of trees up to three-digit character of Bohemia (assigned responsible

a person)



3 region of provenance = natural forest area



4 altitudinal range = forest vegetation level



5 origin: A = autochthonous



NAI = indigenous neautochtonní



NaN-... = neautochtonní # neindigenní from the region of provenance ... ....



N = unknown



6 age (years)-at the stand of the LHP (LHO)



7 Marking stand (the lowest unit of the 3-d distribution of the forest),

the structure of the stand number: Department/Panel/stand/stand group



7A Zakmenění from the new FOREST MANAGEMENT PLAN (LHO)



7B Representation of new wood species LHP (LHO)



the area of the entire crop of 8 new LHP (LHO)



9 Reduced the area recognized by the trees from the new FOREST MANAGEMENT PLAN (LHO); This is calculated as

the actual area of each deck multiplied by zakmeněním and representation



(example: 1.50 x 0.9 x 0.80 = 1.08 ha; where the actual area of each deck is

1.50 ha, zakmenění is 0.9 and representation is 0.80)



10 Phenotypic class (A, B or C)



11 Number of gene base, in which the vegetation is located (to be completed for

tree species, for which the gene base proclaimed)



12 Note (e.g., proposal of the withdrawal period, the proposal limits the amount of the toll

the intentional extraction, etc.)



Č. 26



Requirements for the approval for the production of qualified reproductive

material



1. Seed orchards



(1) documentation (location set, a kind of tree species, quality, default

individuals-ortetů, objective, crossing design and location, components and schema

information about their provenance, insulation, layout) and any

changes of these must be approved and registered with the legacy

person.



(2) the component clones shall be selected for their outstanding characters, special

attention is paid to the criteria:



and the age and stage of development): stands must consist of trees whose

age and stage of development allow the use of selection criteria.



b) Adaptability: it must be clear that the vegetation is adapted to the

ecological conditions in the region of provenance.



(c)) the State of health and resistance: trees in stands must not be contaminated by

harmful organisms and must be resistant to unfavourable to the Habitat and

the climatic conditions in the place of occurrence, with the exception of damage caused by the

pollution of the environment.



(d)) the volume of production: for the approval of selected stands volume production must be

wood mass in the normal case be higher than the mean value is valid

for comparable environmental and economic conditions.



(e)) the quality of wood: in some cases it may be an essential criterion

When you select.



(f)) shape and growth habit: trees in stands must show particularly good

morphological characters, in particular the straightness and roundness of the tribe, for the shape and

the size of branches and good natural pruning. In addition, the

a forked and solid trunks should occur in small

extent.



(3) the component clones or families shall be planted or by

the approved plan prepared by the Commissionaire, and so that each of its

the component has been determined.



(4) Educational interventions in seed orchards shall be described together with the

the selection criteria that you used, and registered with the

responsible person.



(5) the seed orchards shall be managed and reproductive material in them

reap so as to achieve the objectives of the orchards. In the case of seed

orchards for the production of an artificial hybrid must prove

the percentage of hybrids in the reproductive material.



2. Parents of family



(1) the parents of the family shall be selected for their outstanding characters, in particular

the criteria referred to in section 1 (1). (2), or for its combination

the ability to.



(2) the objective, crossing design and pollination system, components, isolation, location and

any changes of these must be approved and registered with the

responsible person.



(3) the identity, number and proportion of parents in a mixture must be approved and

registered responsible person.



(4) in the case of the parents of a family destined to the production of an artificial hybrid

need analysis, the percentage of hybrids in the reproductive

material.



3. Clones



(1) ortets used for the production of clones shall be selected for their outstanding

the characters, in particular the criteria referred to in section 1 (1). (2).



(2) Clones shall be identifiable on the basis of distinguishing marks

approved and registered by the responsible person.



(3) the value of individual clones shall be established by experience or have been demonstrated

sufficiently prolonged experimentation.



(4) the recognition of clones by a Member State is limited to the maximum number of years

or a maximum number of offspring (ramet).



4. Clonal mixtures



(1) clonal mixture shall meet the requirements set out in section 3, paragraph 3. (1)

(2) and (3).



(2) the identity, number and shares of the clones contained in mixtures, selection method

and the default clones must be approved and registered by the responsible person.

Each mixture shall have sufficient genetic diversity.



(3) the recognition by a Member State to a maximum number of years or

the maximum number of offspring (ramet).



Č. 27a



PATTERN



Annex to the application for the recognition of the basic material-request for

recognition of orchards or clonal mixtures as a source of qualified or

of tested reproductive material



Č. 27b



Annex to the application for the recognition of the basic material-request for

recognition of the parents of families, ortetu or clone as a source of qualified or

of tested reproductive material



Explanatory notes:



1 serial number



2 the area of provenance = natural forest area



3 altitudinal range = forest vegetation; for the resources that lie outside the

land intended for the performance of functions of the forest (PUPFL), the designated officer shall determine it



4 Designation of the crop (the lowest unit of the 3-d distribution of the forest),

the structure of the stand number: Department/Panel/stand/stand group; u

sources outside the land intended for the performance of functions of the forest and the cadastral area

parcel number



5 the altitude in meters m.



6 age (years) of the new FOREST MANAGEMENT PLAN (LHO)



7 origin of the crop: A = autochthonous



NAI = indigenous neautochtonní



NaN-... = neautochtonní # neindigenní from the region of provenance ... ....



N = unknown



8 tree Height in meters



9 the stem thickness in inches



10 the shape of the trunk (1 = even, 2 = low, 3 = strong crooked crooked)



11 Cleaning the tribe (1 = excellent 2 = good, 3 = poor)



12 the Crown Shape (oval, 1 =, 2 =, 3 = sometimes 4 =

vřetenovitá, opposite ovate, 5 = 6 = with a domed Crown, 7 = straight, 8 =

spherical, 9 = vlajkovitá)



13 the Crown Length (1 = low, 2 = medium, 3 = long)



14 Note ".



Č. 28



Requirements for the recognition of tested reproductive material sources



1. REQUIREMENTS for ALL TYPES of TESTS



and) General



The basic material, which is to be subject to testing must

meet the appropriate requirements of the annexes to the No. 22 and no. 26.



The tests used for the approval of tested reproductive material shall

prepared, laid out, implement and evaluate an internationally recognised

the procedure. When comparative testing of reproductive material is tested

compared with one or, if possible, with the more recognized or in advance

selected standards.



(b)) characters to be examined



I. Tests must be designed so as to serve to evaluate certain

character set for each test.



II. particular attention should be paid to the criteria, such as

to adaptation, growth capability, response to biotic and abiotic

factors. In addition, there is a need to evaluate the other characters that are

considered significant with regard to the planned special purpose, in

relation to the ecological conditions prevailing in the place of the execution of the test.



c) documentation



On the place of carrying out of tests it is necessary to keep records that describe the

site and climatic conditions, soil, previous use, establishing

the crop species, management measures and damages caused by abiotic/biotic

agents; These records must be made available by a public authority.

The age of the material and the results at the time of the test must be recorded by the authority

the public administration.



(d) the method of test execution)



I. each sample of the reproductive material for establishing comparative test

vyséván, must be planted and grown the same way.



II. Any attempt should be based according to the recognised statistical principle

with the use of a sufficient number of trees, in order to assess

individual characters for each of the tested components.



(e) evaluation and the validity of the results)



I. results of the attempts are evaluated with the help of an internationally recognised

the statistical procedure; the results is required for each of the

the test characters.



II. Method of implementation of the experiments and the results obtained in the different


cases, a freely available.



III. There is a need to adopt an opinion on areas likely

přizpůsobenosti within the country in which the trial was conducted and to the characters,

that may limit its usefulness.



IV. If during the attempt that the reproductive material does not possess



-speeches of the characters of the basic material,



-similar to the potential exposure to-resistance economically significant

damaging agents such as the basic material,



the recognition of such resources should be rejected.



2. the requirements for GENETIC EVALUATION of the BASIC COMPONENT

MATERIAL



and may be genetically) components of the following

basic material:



seed orchards, parents of families, ortets, clones and clonal mixtures;



b) documentation



For the approval of basic material is necessary following

documentation:



I. the identity, origin and genetic origin of the evaluated components,



II. plan of the crossing for the production of reproductive material of the inspected

testing.



c) test procedures



The following requirements must be met:



I. the genetic value of each component is needed to evaluate the

two or more evaluation test, of which at least one is in the

environmental conditions that match the conditions of the intended

use of the reproductive material.



II. The superiority of the reproductive material to be put into circulation,

is determined on the basis of their genetic value and special plan of the crossing.



III. Comparative tests and genetic evaluation assesses the designated officer.



d) evaluation:



I. the superiority of the reproductive material than standard shall be calculated in

relation to the standard for a single character or group of characters.



II. for each of the major characters is necessary to establish whether or not his

genetic value is less than the genetic merit of the standard.



3. REQUIREMENTS for COMPARATIVE TESTING of REPRODUCTIVE MATERIAL



and the selection of the sample of the reproductive material)



I. sample of the reproductive material for comparative testing must be

a representative for reproductive material derived from a given source.



II. Reproductive material produced by the sexually shall



-be harvested in seed orchards in good crop, artificial sprášení is

permissible;



-be harvested by methods that ensure that the acquired

samples are representative.



(b)) Standards



I. the performance of standards used for comparative purposes in the tests should

be in the area in which the tests are carried out, for a long time

well known. The standards represent the material at the beginning of

you try to and under the same environmental conditions for which it was submitted to the

certification, has already proved to be useful for forestry. They have a

If possible, come from crops that have been selected according to the criteria

referred to in annex 19 and 22, or from the source, which has been officially certified for

the production of basic material of the "tested" category.



II. The comparative test of the artificial hybrids must be, if possible,

between the standards used by both parents.



III. If possible, it is necessary to use several standards. If it is

necessary and justifiable, can be replaced with the most appropriate standards

material represented in the test or the mean value of the components

represented in the test.



IV. The same standards are to be used in all tests of the ongoing

in the various site conditions.



c) evaluation



I need to demonstrate statistically significant superiority in

compared with the standard for at least one significant character.



II. it must be clearly evident way to indicate if there are significant

economic or ecological characters, which have been significantly

worse result than in the case of standard; their consequences must be

offset by favourable characters.



4. CONDITIONAL APPROVAL



As a basis for conditional approval may be used early reviews of young

developmental stages. The superiority of the detected based on early reviews

It should be within 10 years.



5. early TESTS



For conditional or final recognition of the public authority may recognise

attempts in forest nurseries, greenhouses and laboratories, where they can

demonstrate that between the character and the characters that would be typically

evaluated in the forestry field tests (field planting), there are

the close correlation. Other characters to be examined shall comply with the requirements referred to in

point 3.



Č. 29a



cancelled



Č. 29b



cancelled



Č. 30



For details about the information being written to the register



A central register of recognised units on the territory of the Czech Republic leads

the authorized person in the register, with each unit records



and trees, for) the type which was the source of the recognised



(b) for recognition of the source) the County in which the resource is located, and a branch

the person responsible for a source,



(c)) of the owner of the source; for natural persons name, surname, or. business

company or name, address of the place of residence or address of

the business, if different from the address of the place of residence, for legal

people business name and address of the registered office,



(d) a description of the resource):



1. in the case of forest: area, the reduced area recognized by the trees,

high grade, age, zakmenění, representation of tree species, the withdrawal period,

toll limitation intentional exploitation;



2. for parents families, ortetů and clones: age, height, stem thickness, description

phenotypic characters;



3. for seed orchards and clonal mixtures: origin, number and composition of clones, area

object;



4. type, serial number, source, source



e) intended use and category of forest reproductive material for which it was

the source of the recognised



(f) the registration number of the units),



g) location; a natural forest area shall be provided for all categories,

unit of solid distribution of forest resources in forest land

cadastral area and parcel number for resources outside the forest land,

Central longitude and latitude area

a natural forest area for resources identified and selektovaného

geographical location of the basic material resources category

qualified and tested reproductive material,



h) altitudinal range, in which the unit is situated is recognised, i.e.. either forest

the growing degree of maps of regional forest development plans or height

zone specified by the responsible person



I) origin; Enter the autochthonous, non-indigenous, neautochtonní neautochtonní

neindigenní or unknown, and in the case of tested reproductive

material, an indication of whether it is a genetically modified organism.



Č. 31



Č. 32



cancelled



1) CSN 48 12 11 (forest seed management-collection, quality and quality tests

fruit and seeds of forest tree species).



2) CSN 48 21 15 (sadebni material lesnich Drevin).



3) § 2 (b). and) point 2 of Act No. 149/2003 Coll., on trade in the reproductive

material of forest tree species.



4) Act 326/2004 Coll., on phytosanitary care and amendments

related laws, as amended.



5) section 23 of Act No. 289/1995 Coll., on forests, and amending and supplementing certain

laws (forest law).



5A) paragraph 15 of Decree No. 215/2008 Coll., on measures to prevent the introduction and

distribution of harmful organisms of plants or plant products,

as amended.



6) section 24 of Act No. 289/1995 Coll.



7) section 25 of Act No. 289/1995 Coll.



10) Commission Regulation (EC) No 2301/2002 of 20 October. December 2002 laying

down detailed rules for the application of Council Directive 1999/105/EC as regards the

the definition of small quantities of seed.



11) Commission recommendation No 2012/90/EU of 14. February 2012 concerning the

the instructions for the information which permit the identification of the partitions of the reproductive

material of forest tree species and the particulars to be given on the labelling

or in the document supplier.