About The Requirements For Professional Qualifications When Mining Activity

Original Language Title: o požadavcích na odbornou kvalifikaci při hornické činnosti

Read the untranslated law here: https://portal.gov.cz/app/zakony/download?idBiblio=60295&nr=298~2F2005~20Sb.&ft=txt

298/2005 Sb.



DECREE



of 12 October. July 2005



about the requirements for professional qualifications and competence in

mining activity or activities carried out using mining techniques and amending

certain legislations



240/2006: Sb.



378/2012: Sb.



The Czech mining Office lays down pursuant to § 5 para. 3 of Act No. 61/1988 Coll.

mining activities, explosives and the State Mining Administration, as amended by

Act No. 542/1991 Coll., and in accordance with § 29 para. 2 (a). (e)) and section 38 of Act No.

18/2004 Coll., on the recognition of professional qualifications and other eligibility

nationals of the Member States of the European Union and amending certain

laws (law on the recognition of professional qualifications), as amended by Act No. 96/2004

Coll.:



PART THE FIRST



REQUIREMENTS FOR PROFESSIONAL QUALIFICATIONS AND COMPETENCE WHEN MINING

THE ACTIVITY OR ACTIVITIES CARRIED OUT USING MINING TECHNIQUES



Title I Of The



PROFESSIONAL QUALIFICATIONS AND COMPETENCE



§ 1



Definition of terms



For the purposes of this Ordinance, means the



and) professional qualifications of competence to work in mining activities and

activities carried out using mining techniques prescribed attention, culminating in an

education and professional practice prescribed by the mining activities, or

activities carried out using mining techniques,



b) populate the expertise of professional qualifications and demonstrate the

knowledge of the law (§ 3 (1)), and to the extent necessary

for the safe and reliable performance of the activity,



c) completed secondary education successful completion of studies in the field of

technical sciences necessary to carry out mining activities or

activities carried out using mining techniques. Theoretical and practical areas,

that make up the content of the education and training required in the Czech Republic,

are set out in annex 1 to this notice. The evidence of proof of

a course, middle education,



d) terminated the successful completion of a university degree studies in the field of

technical sciences necessary to carry out mining activities or

activities carried out using mining techniques. Theoretical and practical areas,

that make up the content of the education and training required in the Czech Republic,

are set out in annex 1 to this notice. The evidence of proof of

completed higher education,



e) professional practice professional activity carried on during mining activities or

activities carried out using mining techniques. Professional experience in the fields of

electrical engineering, mechanical engineering or dumping of wastes, shall also

the performance of the activities of the acquired outside the mining activity or activities carried out by

using mining techniques. The evidence of proof of professional experience,



(f)) direction of mining and underground works of the creation process or liquidation

mining and underground workings in the mining activity or activities

by using mining techniques (includes punching, excavation, reinforcement,

maintenance, reconstruction, establishing, safeguarding and disposal of mining or

underground workings and mining of deposits of minerals, mining overburden dumps and cuts,

deck hoppers),



g) master file documentation the technical bases for the requested

professional competence, to ensure the safety and health at

the work safety and the work conditions in the mining

the activity or activities carried out using mining techniques. ".



§ 2



Professionally qualified person



(1) natural persons established to ensure professional and safe performance

mining activities and activities carried out using mining techniques must comply with the

This professional qualifications:



and) racing down ^ 2) as the individual responsible for the safe and professional

the management of mining activities, or activities carried out using mining techniques on

the bottom must have professional qualifications obtained by completing at least

Master's degree programme ^ 3) and professional experience in mining

the activity or activities carried out in at least four years of mining,



b) racing quarry ^ 2) as the individual responsible for the safe and professional

the management of mining activities, or activities carried out using mining techniques



1. on the quarries, with a total annual production of the mineral extraction greater than 500

thousands of tons of must have professional qualifications obtained by completing at least

Master's degree programme ^ 3) and professional experience in mining

the activity or activities carried out in at least four years of mining,



2. at the quarries with the total annual commercial mining of the mineral is less than 500

thousands of tons of must have professional qualifications obtained by completing at least

Bachelor degree ^ 4) and professional experience in mining

the activity or activities carried out using mining techniques for at least two years

or at least professional qualification in secondary education with a range

GCSE and professional practice in mining activities or activities

carried out in at least four years of mining,



c) racing as the individual responsible for the safe and professional management

mining activity or activities carried out using mining techniques on

operations, there is the function of a race or a race

the quarry, must have the professional skills acquired by completing at least

Bachelor degree ^ 4) and professional experience in the

regulated the activities of at least two years, or at least professional qualification

in secondary education with a range of GCSE and vocational practice

mining activity or activities carried out using at least

for four years,



d) safety officer as an individual eligible for execution of the tasks

in the field of health and safety at work and safety

operation ^ 5) when mining activity or activities carried out by mining

must have professional qualifications obtained by completing at least

Bachelor degree ^ 4) and professional experience in the

regulated the activities of at least two years, or at least professional qualification

in secondary education with a range of GCSE and vocational practice

mining activity or activities carried out using at least

for four years,



e) mining engineer as a natural person eligible project or

design objects and devices that are part of the mining activity

or activities carried out using mining techniques, to draw up plans and

documentation related to mining activities, or activities carried out

using mining techniques, unless they are governed by a special legal

Regulation ^ 6), must have the professional skills acquired by completing

at least master's degree programme ^ 3) and professional practice

mining activity or activities carried out using at least

one year, or at least professional qualifications in a range of secondary

education, culminating in a school-leaving exam and professional practice in mining activities

or activities carried out in at least four years of mining,



(f) installation of electrical equipment), designer is a natural person

eligible project the installation of electrical equipment used in the

mining activity or activities carried out using mining techniques and

develop related plans and documentation. Must have professional

qualifications obtained by completing at least master's degree

program ^ 3) and professional experience in mining activities or activities

by using at least one year or at least professional

qualifications in a range of secondary education, culminating in the GCSE and

professional experience in mining activities, or activities carried out by mining

in at least four years,



g) geomechanik as a natural person eligible to undertake the documentation,

design and control activities in the region must be professional protiotřesové

qualifications obtained by completing at least master's degree

program ^ 3) and professional experience in mining activities or activities

by using at least three years,



(h)), the evaluator of the risks of waste as a natural person eligible

develop an integrated analysis of storage and carry out risk assessments

storage of waste in underground storage ^ 7) must have a professional

qualifications obtained by completing at least master's degree

program ^ 3) and professional experience in mining activities or activities

by using at least four years. This technically competent

the person is also eligible to perform the evaluation of the waste storage facility on the

the surface of the mine incurred by the mining activities, or activities

by using mining techniques and the evaluation of the risks in the handling of

mining wastes ^ 15),



I) head of ventilation as a natural person having the capacity to control the ventilation of the mine

When mining activity must have professional qualifications obtained

by completing at least master's degree programme and support ^ 3)

practice on mining activity or activities carried out using mining techniques

at least three years,



j) technical expert as a natural person provided for in the Czech Mining Authority is

entitled to process



1. expert opinions and advice for the assessment of the stability of underground

objects and other space created by mining activities

way ^ 16),



2. expert reports and opinions and conduct tests at selected mine

machinery, equipment, apparatus and



must have expertise in the range of at least master's

^ 3) program of study and practical training in mining activities, or


activities carried out in at least four years of mining. Czech mining

the Office will take into account when establishing the vocational expert to its technical and

expertise, the length of the professional or scientific practice and knowledge

generally binding legal regulations,



k) technical supervision ^ 8) is the natural person designated to review the performance of the

Professional and safe activities of employees, compliance with technological

legislation, regulations governing the safety and health protection at work,

safety and working conditions. Technical supervision for the management

mining and underground workings must have expertise in the range of

at least secondary education, with GCSE and professional practice

mining activity or activities carried out using at least

six months. Technical supervision for the performance of special activities (in particular

mechanical, electrical, chemical, construction) must have at least secondary education

with a GCSE in the relevant area,



l), designer of the installation of the machinery as a natural person eligible

project the installation of machinery used in mining

activity or activities carried out using mining techniques and develop

related plans and documentation must have professional qualifications obtained

by completing at least master's degree programme and support ^ 3)

practice on mining activity or activities carried out using mining techniques

at least one year or at least professional qualification in the middle range

education with GCSE and professional practice in mining activities

or activities carried out in at least four years of mining,



m) main mining meter as a natural person having the capacity to implement and manage

mine surveying activities. Is responsible for the correctness and completeness of the completed

permissible measuring documentation and its professional management, replenishment and

storage must have professional qualifications obtained by completing at least

Master's degree programme ^ 3) and professional experience in human performance

measuring activities in mining activities, or activities carried out

using at least two years,



n) mining meter as a natural person having the capacity to implement and manage individual

measurement at permissible measuring activity. Is responsible for the accuracy and completeness of the

individual measurements and drawn up various parts of mine surveying

documentation that the person engaged in or followed when permissible measuring

activities must have the professional skills acquired by completing at least

Bachelor degree ^ 4) or in the range of secondary education with

GCSE. In the case of secondary education with GCSE

must have professional experience in human performance measuring activities in mining

the activity or activities carried out using at least one year.



(2) if it is to be a feature of the race down, racing, safety

technician, designer, geomechanika, ventilation, technical manager

supervision and leader, exercised on the plynujícím at the bottom, on the bottom of the dangerous

mining tremors, průtržemi rocks and gases or coal mine, the

is that at least half of the prescribed practical training has been carried out on the bottom

with similar conditions.



§ 3



The competence of the



(1) knowledge of the laws governing the protection and exploitation of bearings

minerals, the safety of operation, the safety and health protection at work,

working conditions in mining activities and the activities carried out by mining

in a way, the fire protection, the safety of technical equipment, security

protected objects and interests from the effects of mining activities, the use of

explosives in mining activities, or activities carried out by mining

in a way, as well as the ability of their application in mining activities, or

activities carried out using mining techniques, and to the extent necessary for the

the safe and reliable performance of the work or function shall be verified during the test.



(2) the competence of the race is also permission for the performance of

regulated activities referred to in paragraph 4 (b). (d)), and k).



§ 4



Verification of professional competence



The authorities of the State Mining Authority validate the competence



and racing down)



(b)) race,



(c)) race,



(d)), security officer



e) Mining Designer,



(f) Designer's installation of electrical equipment),



g) geomechanika,



h) risk assessor to dispose of waste,



even) the head ventilation,



j) vocational experts



k) technical supervision for the management of mining and underground works



l) Designer's installation of the machinery,



m) of the main mining, meters



n) mining meters.



§ 5



Verification of professional competence the institutions of the State Mining Administration



(1) the competence of the individuals referred to in § 4 validate authorities

the State Mining Administration, before commissions established by the President of the

The Czech Mining Authority. The exam consists of a written and an oral part.



(2) the test is administered locally by the application to the competent authority of the State

Mining Authority defining the desired type of mining activities, or

activities carried out using mining techniques to the professional competence. In

the application form is a natural person shall indicate your name, surname, date of birth, and

place of permanent residence. The application for registration shall be accompanied by a certified copy of the

evidence of professional qualifications and evidence of existing work in the field of

mining activity or activities carried out using mining techniques.



(3) the test may be granted a natural person who has submitted the

the documents provided for in paragraph 2.



(4) a natural person referred to in section 4 (b). a) to (i)) and l) and m) with the application

Furthermore, the master shall submit documentation to obtain the requisite technical

eligibility, which have processed or were involved in its processing.



(5) when the verification of the technical competence of the racing and racing down the quarry

in accordance with paragraph 1, the Commission shall verify and assess existing also results in

technical features and performance capabilities to deal with the operational situation and

extraordinary events.



(6) the test result shall be assessed or has failed to comply with the stage. To

the result of the test will also include reviews from the perspective of the applicable

safety regulations in the processed documentation referred to in paragraph 4. About

the test report shall be drawn up, in which a record shall indicate the questions, reviews

the answer, the assessment of the dossier referred to in paragraph 4, the result

tests and test signatures of the Commission. The test may be repeated a maximum of

Once in the time provided for the evaluation by the Commission, after the expiry of the

the period of 3 months.



(7) on the basis of tests carried out successfully by the competent administrative authority

employees of the certificate of professional competence with the definition of the type of mining

the activity or activities carried out using mining techniques.



§ 6



Validity of the certificate



Certificate of professional competence is valid for 5 years from the date of its

exposure. The validity of the certificate of professional competence can be repeatedly

extended on the basis of successfully carried out periodic tests in accordance with

the provisions of § 8 of the next 5 years.



§ 7



Verification of the technical competence of organizations



(1) the competence of the individuals providing the Organization

Professional and safe performance of mining activities, or activities carried out

"mining" means the test organization, which are in the

or a similar proportion, if it does not verify the State Mining Authority.



(2) the competence of the individuals providing the organization when

mining activity or activities carried out using mining techniques technical

supervision of professional and safe performance of special activities, in particular

electrical, mechanical, chemical, construction, validates the test organization.



(3) knowledge of safety regulations for individuals whose professional

verifies the eligibility of the Organization and of individuals, which do not

repeated verification of professional competence shall be checked before the Commission

the organization. Tests are repeated within a period of three years from the previous

of the test.



Title II



REPEATED VERIFICATION OF PROFESSIONAL COMPETENCE



§ 8



Periodic exams



(1) natural persons whose professional competence referred to in article 4

(a). and) to j) and (l)) to (n)) is being reviewed by the authorities of the State Mining Administration, is

must undergo repeated verification of professional competence (hereinafter referred to as

"periodic test") to the extent necessary for the performance of activities.



(2) the periodic test is conducted within five years of the previous

of the test.



(3) Periodic examination is held before the Commission, fixed by the President of the Czech

Mining Authority. The request for a periodic exam must be submitted to the competent

authority of the State Mining Authority no later than 60 days before the expiry of the period

in accordance with paragraph 2.



(4) a periodic test in accordance with paragraph 2 may be repeated a maximum of

Once in the time provided for the evaluation by the Commission.



(5) on the periodic test shall be the record that contains the information referred to in

the provisions of § 5 para. 6.



(6) the date of execution of the periodic tests and validity of the certificate shall be marked

competent administrative authority on the reverse of the certificate.



Title III



RECOGNITION OF PROFESSIONAL QUALIFICATIONS AND PROFESSIONAL COMPETENCE OF STATE

NATIONALS OF THE MEMBER STATES OF THE EUROPEAN UNION



§ 9



(1) the recognition of professional qualifications, competence and other

eligibility of nationals of the Member States of the European Union and the


the Member States of the European economic area and the Swiss

Confederation to the performance of the relevant regulated activities are carried out according to

special legal regulation ^ 14) where it is verified by the authorities of the State mining

Administration.



(2) in the case of nationals of Member States of the European Union and the Member

States of the European economic area and the Swiss Confederation

required for the performance of the regulated activities of the essential knowledge of the Czech

language, to the extent necessary to ensure the safety and protection of health

at work and the safety of operations.



Title IV



TRANSITIONAL PROVISIONS



§ 10



(1) valid certificates of competence issued by the authorities of the State mining

Administration before the date of entry into force of this Decree shall remain in force.



(2) the competence of the race down to the performance grants

regulated activities referred to in paragraph 4 (b). c) to (f)), h), (j))

and (l)). The competence of the quarry with annual extraction of racing more than 500

thousands of tons of warrants exercise of regulated activities specified in § 4

(a). c) to (f)), and (l)).



(3) a natural person, that the effectiveness of this Decree meet the professional

eligibility for the performance of the activities of the Executive, meet the requirements of

professional competence for performance racing [§ 2, paragraph 1 (b), (c))].



Title V Of The



REGULATION (EEC)



§ 11



Shall be repealed:



1. Decree No. 340/1992 Coll., on the requirements for the qualification and the professional

eligibility and verification of the technical competence of workers to the mining

activities and activities carried out using mining techniques and amending certain

regulations issued by the Czech Mining Authority to ensure the safety and

occupational health and safety in mining activities and

activities carried out using mining techniques.



2. Decree No. 74/2001 Coll., amending Decree No. 340/1992 Coll.

the requirements for qualifications and competence and about authentication support

the eligibility of workers for mining activities and the activities carried out by

using mining techniques and amending certain regulations issued by the Czech mining

authority to ensure the safety and occupational health and safety

When operating in mining activities and activities carried out using mining techniques,

as amended by Decree No. 239/1998 Coll.



PART TWO



Amendment to Decree No. 72/1988 Coll. on explosives as amended

the laws of the



§ 12



Decree 72/1988 Coll. on explosives, as amended by Decree No. 173/1992

Coll., Decree No. 340/1992 Coll., Decree No. 99/1995 Coll., Decree No.

341/2001 Coll. and Decree No. 338/2004 Coll., is amended as follows:



1. In section 27 para. 8, the words "the Executive" shall be replaced by

"racing, racing or racing down the quarry".



2. In section 102 paragraph. 1 the words "the head of the Organization" are replaced by the words

"Racing".



PART THREE



Amendment to Decree No. 22/1989 Coll. on safety and health at work

and safety when mining activities and the activities carried out by

using mining techniques in the underground, as amended



section 13 of the



Decree 22/1989 Coll. on safety and health at work and the

traffic safety in mining activities and the activities carried out by

using mining techniques in the underground, as amended by Decree No. 477/1991 Coll.

Decree No. 340/1992 Coll., Decree No. 3/1994 Coll., Decree No. 54/1996

Coll., Decree No. 109/1998 Coll., Decree No. 434/2000 Coll., Decree No.

330/2002 Coll. and Decree No. 141/2004 Coll., is amended as follows:



1. in section 19 para. 2, the second sentence is replaced by the phrase "the filling of professional practice,

the method of testing and the time limits for the repeat determines the race down. ".



2. In paragraph 114, paragraphs 2 and 4 shall be deleted.



The former paragraph 3 shall become paragraph 2.



3. In article 150, paragraphs 2 and 3 shall be deleted.



PART FOUR



Amendment to Decree No. 26/1989 Coll. on safety and health at work

and safety when mining activities and the activities carried out by

using mining techniques on the surface, as amended



§ 14



Decree 26/1989 Coll. on safety and health at work and the

traffic safety in mining activities and the activities carried out by

using mining techniques on the surface, as amended by Decree No. 340/1992 Coll.

Decree No. 8/1994 Coll., Decree No. 236/1998 Coll., Decree No. 434/2000

Coll. and Decree No. 142/2004 Coll., is amended as follows:



1. In section 4, paragraph 4. 6, § 9 para. 1 and 2, section 11 (1) 1 and 2, § 13 para. 2, section 17

paragraph. 2, § 21, art. 2, section 158 paragraph 2. 1, § 163 para. 6 and § 178 odst. 2, the

the word "Executive" shall be replaced by "Racing".



2. in section 17(2). 2, the second sentence is replaced by the phrase "the filling of professional practice,

the method of testing and the time limits for the repeat determines the refractive or racing

Racing. ".



PART FIVE



Amendment to Decree No. 51/1989 Coll. on safety and health at work

and safety when editing and refining of minerals, as amended by

amended



§ 15



Decree 51/1989 Coll. on safety and health at work and the

the safety of operations when editing and refining of minerals, as amended by

Decree No. 340/1992 Coll., Decree No. 9/1994 Coll., Decree No. 237/1998

Coll., Decree No. 434/2000 Coll. and Decree No. 143/2004 Coll., is amended

as follows:



1. In section 4, paragraph 4. 5, § 9 para. 1 and 2, section 11 (1) 2, § 13 para. 2, section 21

paragraph. 2 and § 133 paragraph 2. 2 the words "the Executive" shall be replaced by

"Racing".



2. in section 17(2). 2, the second sentence is replaced by the phrase "the filling of professional practice,

the method of testing and the time limits for the repeat determines the racing, racing down or

Racing quarry. ".



PART SIX



Amendment to Decree No. 55/1996 Coll., on the requirements to ensure the safety and

occupational health and safety in the work carried out by the

using mining techniques in the underground, as amended



section 16 of the



In section 2 of Decree No. 55/1996 Coll., on the requirements to ensure the safety and

occupational health and safety in the work carried out by the

using mining techniques in the underground, as amended by Decree No. 144/2004 Coll.,

the following paragraph 4 is added:



"(4) the term of the head of a worker for the purposes of this Ordinance means

a natural person with a certified professional qualification race. ".



PART SEVEN



Amendment to Decree No. 239/1998 Coll. on safety and health at

work and safety in the mining and processing of oil and gas and

When drilling and geophysical work and amending certain provisions of the

ensure the safety and protection of health at work and the safety of operations

When mining activities and activities carried out using mining techniques in the

underground, as amended by Decree No. 360/2001 Coll.



§ 17



Decree 239/1998 Coll. on safety and health at work and the

safety in the mining and processing of oil and gas and

drilling and geophysical work and amending certain provisions of the

ensure the safety and protection of health at work and the safety of operations

When mining activities and activities carried out using mining techniques in the

underground, as amended by Decree No. 360/2001 Coll., is amended as follows:



1. In section 2, the following point (i)), which read as follows:



"i) Executive means a natural person with proven expertise

Racing. ".



2. Part three, including the title.



PART EIGHT



Amendment to Decree No. 175/1992 Coll., on conditions for the use of bearings

non-reserved minerals



section 18



In section 2 (2). 5 of Decree No. 175/1992 Coll., on conditions for the use of bearings

non-reserved minerals, the words "the Executive" shall be replaced by

"Racing".



PART NINE



Amendment to Decree No. 435/1992 Coll., on mining surveying documentation

mining activities and certain activities carried out by mining

in a way, as amended by Decree No. 158/1997 Coll.



§ 19



In § 21 para. 3 Decree No. 435/1992 Coll., on mining surveying documentation

When mining activity and certain activities carried out by mining

in a way, the words in brackets shall be replaced by "racing, racing mine

or racing quarry ".



PART TEN



Amendment to Decree No. 15/1995 Coll. on mining activities, and permissions

activities carried out using mining techniques



section 20



Decree 15/1995 Coll. on permissions to mining activities and activities

by using mining techniques, is amended as follows:



1. In article 2 (2). 1 (b). (e)), section 3 (2). 1 (b). (e)) and section 4, paragraph 4. 1 (b). (c))

the words "Chief" shall be replaced by the word "race".



2. In article 1 (1). 1 the words "Executive" shall be replaced by

"Racing".



PART ELEVEN



The EFFECTIVENESS of the



section 21



This Decree shall enter into force on 1 January 2000. August 2005.



President:



Prof. JUDr. Ing. Makarius, CSc. v. r.



Č. 1



The input requirements for the theoretical and practical areas that make up the content

the education and training required in the Czech Republic for the performance of the selected

regulated activities



1. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of a race of mine:



-Mineralogy and Petrography,



-mining,



-mechanics of rocks and soils,



-Geology,



-geomechanika,



-the conquest of the bearings,



-minting of underground mine workings,



-mine surveying,



-ventilation of the mine,



-mining risks and rescue work,



-the upper right and the safety regulations,



-rehabilitation and reclamation of mining activities,



-ensure the winding down,



-the effects on the landscape,



-blasting work.




2. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the occupational fracture under §

2 (2). 1 (b). (b) point 1 of the Decree):



-Mineralogy and Petrography,



-mining,



-mechanics of rocks and soils,



-Geology,



-Geodesy,



-the conquest of the bearings,



-mining risks and rescue work,



-the upper right and the safety regulations,



-blasting work.



3. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activities of the occupational fracture

According to § 2 (2). 1 (b). (b)), point 2 of this order:



and geology),



(b)) the conquest of bearings,



(c)) and rescue work, mining risks



(d) upper right) and safety regulations,



e) blasting operations.



4. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activities of the occupational and

safety officer under section 2 (2). 1 (b). (c)), and (d)) of this order:



and mining, or the foundations of the underground), and civil engineering, or

the study of the subject of similar content,



b) geology,



(c)) or mine surveying, Geodesy



d) engineering or machinery, or study a subject similar

content,



e) quarrying of bearings or stamping of underground works or study course

similar content,



f) blasting,



g) safety regulations.



5. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activities of the mining

the designer according to § 2 (2). 1 (b). (e)) of this order:



and mining, or the foundations of the underground), and civil engineering,



b) geology,



c) technical drawing,



d) engineering or machinery,



e) geomechanika or Geotechnics,



(f)) or underground mining ventilation works,



g) extraction of bearings or stamping of underground works or study course

similar content,



h) mining surveying or geodesy,



I) safety regulations,



j) blasting operations.



6. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activities of the head

ventilation according to § 2 (2). 1 (b). I) of this order:



and) mining,



b) geology,



c) engineering or machinery,



(d) ventilation of mine or underground) works,



e) quarrying of bearings or stamping of underground works



f) mining surveying or geodesy,



g) safety regulations,



h) blasting operations.



7. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activities of the technical

supervision for the management of mining and underground works according to § 2 (2). 1 (b). k)

of this order:



and mining, or the foundations of the underground), and civil engineering, or

study the subject of similar content,



b) engineering or machinery,



c) conquest of bearings or stamping of underground works or study course

similar content,



d) blasting,



e) safety regulations. ".



8. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activity designer

installation of electrical equipment in accordance with § 2 (2). 1 (b). (f)) of this

Decree:



and electrical engineering),



b) safety regulations.



9. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the geomechanika according to § 2

paragraph. 1 (b). (g)) of this order:



-Mineralogy and Petrography,



-mining,



-mechanics of rocks and soils,



-Geology,



-geomechanika,



-mining risks and rescue work,



-drilling work, technology



-the upper right and the safety regulations,



-mining Geophysics,



-blasting work in the mines.



10. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the risk assessor pursuant to §

2 (2). 1 (b). (h)) of this order:



-Mineralogy and Petrography,



-Chemistry,



-mining, geodesy, surveying, or



-mechanics of rocks and soils,



-Geology,



-hydrogeology and drainage,



-mining and the environment,



-mining risks and rescue work,



-the upper right and the safety regulations,



-rehabilitation and reclamation of mining activities.



11. Theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activities of the main

the mining of the meter pursuant to § 2 (2). 1 (b). m) of this order:



and mine surveying or Geodesy),



(b)) or the foundations of the underground mining and civil engineering,



c) Geology or Geotechnics,



d) safety regulations,



e) mining damage and the results of mining activities, or the doctrine of

the environment.



12. The theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the mining of the meter pursuant to §

2 (2). 1 (b). n) of this order:



and mine surveying or Geodesy),



(b)) or the foundations of the underground mining and civil engineering,



c) Geology or Geotechnics,



d) safety regulations.



13. The theoretical and practical areas that comprise the content of education and

the preparation required in the Czech Republic for the performance of the activity designer

installation of machinery according to section 2 (2). 1 (b). l) of this order:



and) engineering or machinery,



b) safety regulations.



Č. 2



cancelled



Selected provisions of the novel



Article II of Decree No. 240/2006 Coll.



Transitional provisions



1. The requirements of this Decree provided for the competence of the

technical supervision for the management of mining and underground workings shall be construed as

to be fulfilled by the natural persons who carry out this work on 1 January 2007. August

2005, their expertise has been validated by the Decree No.

340/1992 Coll., about the requirements for qualifications and competence and of

verification of the technical competence of workers to the mining activities and

activities carried out using mining techniques and amending certain regulations

issued by the Czech Mining Authority to ensure the safety and protection of health

at work and the safety of operations in mining activities and activities

by using mining techniques, in wording of later regulations, and after a day

entry into force of this Decree shall perform this function for the same

the organization.



2. The competence of the race of the mine is also authorized to exercise

regulated activities referred to in paragraph 4 (b). c) to (e)), i) and k) of the Decree

No. 298/2005 Coll., as amended by this Ordinance. The competence of the race

the quarry with annual extraction of greater than 500 000 tonnes shall entitle to exercise

regulated activities referred to in paragraph 4 (b). c) to (e)) and k) Decree No.

298/2005 Coll., as amended by this Ordinance. The competence of the race

the quarry with annual extraction of less than 500 000 tonnes entitles to exercise

controlled activity referred to in section 4 (b). k) Decree No. 298/2005 Coll., in

the text of this Ordinance.



Article. (II) Decree No. 378/2012 Coll.



Transitional provisions



A technically competent person referred to in section 4 (b). j), m) and (n)) Decree No.

298/2005 Coll., in the version in force from the date of entry into force of this order,

the period runs to the fulfilment of the obligations provided for in § 8 of the Decree No.

298/2005 Coll., in the version in force from the date of entry into force of this order,

from the date of entry into force of this Decree. If other referred to professionally

eligible persons the periodic examination within 5 years of entry into force of this

the Ordinance shall cease to be the certificate validity.



2) § 6 para. 1 of the law No. 61/1988 Coll. on mining activities, explosives

and on the State Mining Administration, as amended.



3) section 46 of Act No. 111/1998 Coll., on universities and amending and supplementing

other laws (law on higher education), as amended

regulations.



4) section 45 of Act No. 111/1998 Coll.



5) § 6 para. 4 of law No. 61/1988 Coll.



6) for example, Act 62/1988 Coll., on geological works, as amended by

amended, Decree No. 75/2002 Coll. on road safety

electrical technical equipment used in mining activities and

activities carried out using mining techniques.



7) Council Directive 1999/31/EC of 26 July 2000. April 1999 on the landfill of waste.



8) section 7 of Decree No. 22/1989 Coll. on safety and health at

work and safety in mining activities and mining

non-reserved minerals underground, as amended.



section 6 of Decree No. 55/1996 Coll., on the requirements to ensure the safety and

occupational health and safety in the work carried out by the

using mining techniques in the underground, in the wording of later regulations.



section 7 of Decree No. 239/1998 Coll. on safety and health at work

and safety in the mining and processing of oil and gas and

drilling and geophysical work and amending certain provisions of the

ensure the safety and health at work and the safety of operations

When mining activities and activities carried out using mining techniques, as

amended.



section 7 of Decree No. 26/1989 Coll. on safety and health at work and the

traffic safety in mining activities and in the activities carried out by the

using mining techniques on the surface, as amended.




section 7 of Decree No. 51/1989 Coll. on safety and health at work and the

the safety of operations when editing and refining of minerals, as amended by

amended.



section 7 of Decree No. 26/1989 Coll. on safety and health at work and the

safety when mining activity carried out using mining techniques

on the surface, as amended.



14) Act 18/2004 Coll.



15) § 4 paragraph 2. 3 Decree No. 429/2009 Coll., laying down the terms of the plan

for the management of extractive waste, including its properties and

some additional details for the implementation of the law on the management of extractive

waste.



16) section 5 c of Act No. 61/1988 Coll.