352/2005 Sb.
The DECREE
of 5 December. September 2005
the details of the waste electrical and electronic equipment and on the
closer management financing conditions
(Ordinance on waste electrical and electronic equipment)
Change: 65/2010 Sb.
Change: 285/2010 Sb.
Change: 158/2011 Sb.
Change: 249/2012 Sb.
Change: 178/2013 Sb.
Change: 200/2014 Sb.
Change: 200/2014 Coll. (part)
The Ministry of the environment, in agreement with the Ministry of finance
determined in accordance with section 37f paragraph. 2, section 37, paragraph. 3, § 37i paragraph. 7, § 37j paragraph.
paragraph 5, section 37k. 7, section 37l paragraph. 7, § 37n paragraph. 5, § 37o, paragraph. 2, § 37p
paragraph. 4 and § 39, paragraph. 12 of law No 185/2001 Coll., on waste and amending
certain other laws, as amended by Act No. 477/2001 Coll., Act No.
76/2002 Coll., Act No. 275/2002 Coll., Act No. 320/2002 Coll., Act No.
356/2003 Coll., Act No. 167/2004 Coll., Act No. 188/2004 Coll., Act No.
317/2004 Coll. and Act No. 7/2005 Coll. (hereinafter the "Act"):
PART THE FIRST
BASIC PROVISIONS
§ 1
The subject of the edit
(1) this Decree incorporates the relevant provisions of the European Union ^ 1) and
provides for the
and subgroups that electrical equipment) fall into the groups of electrical equipment
referred to in annex 7 of the Act,
(b) further conditions of individual ways) the fulfilment of obligations of manufacturers
(c) the content of the annual report),
d) range and method registration flow backward taken
electrical and electronic waste collected separately,
(e) further conditions how to) carry out the duties and ensuring the financing of the
for the purposes of entry in the List,
(f)) means of identification of EEE placed on the market after day 13. August
2005,
(g)) the pattern of the graphic symbol for the marking of electrical and electronic equipment for the purpose of
taking back Eee and separate collection of elektroodpadů,
h) technical requirements for removal of priority substances and components of
elektroodpadů, storage and processing of elektroodpadů,
I) range and method of recording and reporting of data concerning the assumed
elektroodpadech and methods of their processing, recovery and disposal, and
the method of reporting facilities for the collection, processing and use
elektroodpadů,
j) details of how the implementation of taking back Eee
originating from households.
the method of calculating the level of utilisation) electronic waste.
(2) this Ordinance shall state the
and more financing conditions loading) with electronic equipment
originating in households listed on the market after day 13. August 2005,
(b)) to the financing of more conditions for electronic equipment
originating in households listed on the market to day 13. August 2005,
(c)) for more financing conditions dealing with electronic waste management
nepocházejícími from private households,
(d)) more funding conditions for separate collection, treatment, recovery and
the removal of electronic waste from solar panels under section 37p paragraph. 1
the law, including the method of calculating the minimum amount of financial
resources on assigned bound bank account and the method of their implementation and
Furthermore, the method for calculating the minimum level of contributions and the method of disposal
them,
(e)) more financing conditions under section 37p paragraph. 2 of the Act, including the
How to calculate the minimum amount of contributions and the method of dealing with them.
(3) for the purposes of This Ordinance on cross-border transport used
electrical and electronic equipment provides
and the method of authentication and proof of) the functionality of used electrical equipment,
(b) the documentation referred to in §) range 37r paragraph. 4 of the Act, and a list of other
the documents accompanying the cargo transported by the used
electrical equipment, including the method of their application,
(c) enumeration of the electrical equipment with the content) of dangerous substances, which may not be
transported as used.
§ 2
The basic concepts
For the purposes of this Ordinance means
and electrical and electronic equipment-WEEE) historical originating in
households put on the market to day 13. in August 2005, which is intended to
back,
(b) electronic waste electrical and electronic equipment) historic-non-
households put on the market to day 13. in August 2005, which happened
waste pursuant to section 3 of the Act,
(c))-network equipment to collect elektroodpadů, taking back seats
electrical equipment and installations for the treatment, recovery and disposal
elektroodpadů and electrical equipment and contractual relations between their
operators and manufacturers of electrical equipment, whose aim is to ensure
processing and utilization of recovered electronic equipment, and separately
the captured elektroodpadů,
(d)) the individual system-system created and administered separately, and
at their own cost by one manufacturer,
e) solidarity-based-system created and operated by two or more
producers,
f) collective system-a system created by the manufacturers or producers
responsible for the legal person and a legal person distinct from the
the manufacturer or producer, in charge of the legal person,
g) operator system-a legal person founded as
commercial company or cooperative, or organizational component of the foreign
legal entities located on the territory of the Czech Republic operating
the collective system,
h) registration number manufacturer-serial number of the registration of the manufacturer in the list
(§ 37i) Act,
I) registration number of the operator system-serial
the registration number of the collective system to the list of operators,
j-financial contribution amount), which contributes to the
the collective system to ensure the waste piece or kilogram
electrical and electronic equipment originating from households and to ensure the disposal of
piece or kilogram elektroodpadů,
on the historical contribution to) electrical equipment-financing amount
the producer contributes to the collective system to ensure the collection,
treatment, recovery and disposal of the piece or the pound of the historic
electrical and electronic equipment,
l) homogeneous material-material that cannot be mechanically
divided into diverse material, and that he has unchangeable composition in
all its parts, in particular plastics, ceramics, glass, metals, alloys,
paper, rubber.
PART THE SECOND
The details of the waste electrical and electronic equipment
§ 3
The subgroup of Eee
(1) a subgroup of the Eee, which fall into each of the groups
laid down in annex 7, part I of the Act, are listed in annex No. 1.
Part I of this Decree.
(2) a subgroup of the Eee, which fall into each of the groups
laid down in annex No. 7 of part II of the Act, are listed in annex No. 1.
Part II to this Decree.
(3) in the case of doubt as to the classification of electrical equipment to groups
decisive, the purpose for which the use of the electrical equipment manufacturer to determine, or
for what purpose is or was this Eee is usually determined
If the manufacturer of the electrical equipment already exists or does not exist
the accompanying documentation, which sets out the purpose of the use of electrical equipment.
§ 4
Further conditions of the individual ways of fulfilment of the obligations of the manufacturers
(1) Producers of EEE shall ensure fulfilment of their obligations under the
part of the fourth head of the second part of the eighth of the Act in the context of the individual,
the solidarity or collective system.
(2) if the manufacturer decides to carry out its obligations under the
the individual system, fulfils the obligation of financial collateral management
historical electronic equipment according to the third part of this order, together
with the same group of producers of EEE by means of collective
the system.
(3) if the manufacturer decides to perform his duties within the framework of the solidarity
the system satisfies the obligation to submit a proposal for the entry in the list (hereinafter referred to as
"the proposal to write"), and the obligation to mark electrical and electronic equipment separately.
The financial obligation of ensuring the management of historical
electronic equipment in accordance with part III of this Ordinance shall implement, together with the
the same group of producers of EEE by means of collective
the system.
(4) If a manufacturer engages in a collective system, fulfils the obligation
Mark electrical and electronic equipment separately.
§ 5
Further conditions how to carry out the duties and ensure funding for
the purpose of the entry in the List
(1) Producers of Eee, who carries out the obligations in the framework of the
the individual or the solidarity system, shall be submitted for registration to the
the form of which a specimen is given in annex 2 to this Decree. Manufacturers
electrical equipment, who performs his duties through
the operator of a collective system, which is not yet registered in the list
for the Group of Eee, for registration shall be submitted together with the
This operator on a form, a specimen of which is given in annex No 3
to this Decree. The manufacturer shall for the purposes of this provision, the means also
authorized representative pursuant to § 37q law.
(2) If the manufacturer fulfils the obligations of the law for each group
or subgroup within the more electrical systems, serving suggestions
the registration referred to in paragraph 1 for each system separately, in which they are
involved.
(3) the part of the proposal is to write a description of the collateral to the financing of
electronic equipment originating from households and with electronic waste management
nepocházejícími from households, regardless of the date of the placing on the market, which
contains a detailed methodology, funding and control of the use of the method
contributions, in particular the limits of labour resources and the method of disposal
the reported economic result, so that none of the producers directly or
indirectly, the property benefits gained from participation in this system.
(4) manufacturers, who shall carry out the duties within the individual system
waste electronic equipment from private households, as referred to
market after a day of the 13. August 2005, attach to the proposal on the registration of the plan
ensure the deposits of funds based on the already tied
bank account or a copy of a valid insurance contract concluded.
(5) Producers, who carries out the obligations in the framework of the solidarity system
waste electronic equipment from private households, as referred to
market after a day of the 13. August 2005, attach to the proposal on the registration of the agreement on the
the way the solidarity of performance with another or other producers in it
combined; the agreement contains, in particular, the proportion of manufacturers on financing,
the control mechanisms for the solidarity of the system and the way of ensuring the financing of the
waste electronic equipment in the case of the demise of the solidarity system.
(6) the collective system Operators in the proposal to write also stated
How to calculate the contributions or contributions on the historic WEEE and
the way in which producers will pay contributions to the collective scheme.
Part of the contributions and the contributions to the historical electrical equipment are
costs of manufacturers on the creation and commissioning of the system, with the exception of costs
the acquisition of equity participation in a collective system to the operator.
(7) the operator of a collective Enrollment system, which ensures
the financing of the management of historical electronic equipment, the
performs in the same way as the operator of a collective system,
that ensures the financing of waste electronic equipment originating in
from households, placed on the market after day 13. August 2005.
(8) in the design of the registration system to the list of operators for
ensuring the financing of the management of electronic waste from solar panels
must be satisfied that the proposed amount of contributions shall include all
estimated future costs to ensure the transmission to the processing,
the take-back and separate collection, treatment, recovery and disposal
electronic waste from the solar panels.
(9) for the purpose of carrying out the duties through the collective system, with
except for the fulfilment of obligations pursuant to section 37p of the Act, you can conclude an agreement on
that the collective system will ensure the fulfilment of the obligations for producers
all electrical equipment in the context of the group, electrical equipment, regardless of
whether they come from households or not, and regardless of the date when the
the EEE placed on the market. The agreement concluded in accordance with the first sentence
It is part of a proposal to write.
Section 5a
(1) after registration to the list will receive the operator of collective
system and the manufacturers or authorized representatives, who shall carry out their obligations in
the individual or the solidarity system login
to allow remote access to the list. The login information is not
part of the decision on the entry to the list.
(2) in the event that, in the implementation of changes to the information procedure referred to in section paragraph 37i. 5
the law, the Ministry of the environment (hereinafter referred to as "the Ministry") prompts
a person enrolled in the list of supporting documents to substantiate the showing that the performance of
its duties is provided, the person entered in the list for the
this purpose, the form of which a specimen is given in annex 2 to this
the Decree, which fills only the data that has changed. If this is the
the person the operator system, the form of which a specimen
is given in annex 3 to this Decree, in which only those data,
that has changed.
§ 6
The contents of the annual reports on the implementation of the obligations of the producers for the previous calendar
year
(1) the format and content of the annual report on the implementation of the obligations laid down for
separate collection, the collection, processing, utilisation and deletion
electrical equipment and elektroodpadů for the previous calendar year is listed in the
Annex No. 4 of this Ordinance.
(2) a separate annex to the annual report referred to in paragraph 1 to be processed
operator of the collective system, which ensures the financing of the
transmission to the processing, recovery and disposal of electronic waste from solar
Panel in accordance with section 37p paragraph. 2 of the Act, including the implementation of these obligations,
list of solar power plants, for which this operator
the collective system ensures fulfilment of obligations pursuant to section 37p paragraph. 2
the law. This list contains:
and) name and surname, the name or business name of the operator of solar
power plants,
(b) the address of the operator), solar power plant,
(c)) the identification number and the license number for the production of electricity
the operator of solar power plants,
(d)) the weight and the installed capacity of all the solar panels placed on the market
by 1 January 2004. January 13 in each of the solar power plant, which has its
the operator shall carry out the duties agreed under section 37p paragraph. 2 of the law on
under a contract with the provider of the collective system,
(e) the amount of the contributions selected) in a given calendar year from operators
solar power plants
(f) the weight of the electronic waste) of solar panels placed on the market until the date of
January 1, 2013, which was retroactively removed or picked up separately in the
calendar year of each solar power plant, for which the operator
the collective system ensures the fulfilment of the obligations of the operator of solar
power under section 37p paragraph. 2 of the Act,
g) weight of electronic waste from solar panels placed on the market until the date of
January 1, 2013, which was processed in a given calendar year from each
solar power plant, for which the operator of a collective system
ensure fulfilment of the obligations of the operator of solar power plants under section
37p paragraph. 2 of the Act,
(h) the amount of cash spent) in a given calendar year to a
fulfilment of the obligations under section 37p paragraph. 2 of the Act in the context of collective
the system.
section 7 of the
Flow records removed and separately collected WEEE
electronic waste
(1) the manufacturer or operator of the collective system keeps records of flow
backward taken separately collected WEEE and electronic waste from
the place of collection or the place of separate collection after processing,
recovery or disposal of electronic waste in this range:
and the date and number of registration) in the register,
(b)) name and surname of the person responsible for the keeping of registers,
(c) the electrical equipment referred to in annex) of the Group No. 7 of the law on reverse
taken separately collected WEEE and electronic waste,
(d) the address of the place of return), the address of the place of separate collection or
address of the last dealer, if the electrical equipment
retroactively removed the last dealer, or the name of the municipality, the municipal
a circuit or district of Chartered city, on
the territory has been re-exported electrical or electronic waste is removed
separately, if you cannot give an address of one of the listed places,
(e)), the total weight of EEE that was retroactively removed in place
or territory referred to in subparagraph (d)),
(f)), the total weight of waste Eee, which was separately picked up in the spot
or territory referred to in subparagraph (d)),
g) total weight of reused electrical equipment,
(h) the identification data of the person) that was passed to retroactively removed
electrical or electronic waste collected separately, in the range of
specified in table 3, column 7 of annex 4 to this Decree,
I) total weight of recovered electronic equipment, which was
passed to the person referred to in subparagraph (h)) for the purpose of their processing, the use of
or delete,
(j)), the total weight of collected EEE waste separately, which was passed to the
the person referred to in subparagraph (h)) for the purpose of their processing, use or
delete, and
the total weight of elektroodpadů processed) each
the processor within the range specified in table 3 of annex 4 to this
the Decree.
(2) the register referred to in paragraph 1 shall be taken in reverse takeover
electrical and electronic equipment from the site collection or from the seller
or when taking over electronic waste from separate collection points or from
and when you pass the electrical or electronic waste to a person
entitled to treatment, recovery or disposal. The registration of
quantities processed by each processor elektroodpadů with leads in
monthly intervals.
§ 8
Ways of marking of electrical equipment
(1) electrical and electronic equipment put on the market after day 13. August 2005 indicate
the symbol of the manufacturer and a symbol of the placing on the market.
(2) the designation symbol manufacturer electrical equipment shall be carried out:
and showing the first and last names), or the business of the company,
(b)), indicating the brand under which the manufacturer imports or lists
electrical equipment on the market and which shall indicate in the registration, or
(c) the registration number of the manufacturer) in the list.
(3) the designation by the symbol placed on the market after day 13. August 2005:
and showing the data) the placing on the market,
(b)) indicating the symbol "8/05", or
(c)) showing the graphic symbol according to the model No. 1 referred to in the annex to
No 6 of this Ordinance.
(4) the designation of the electrical equipment for the purpose of taking back Eee
and separate collection of elektroodpadů is done showing the graphic
a symbol referred to in model No 1 or no 2 in annex 6 of this
the Decree.
(5) the designation of the electrical equipment referred to in paragraphs 1 to 3 shall be placed on
electrical and electronic equipment so as to be visible, legible and indelible when
their normal use.
(6) If the indication referred to in paragraphs 1 to 3 shall not be placed directly on the
electrical equipment, says in the accompanying documentation. In the case of very
small electrical equipment, which are exchanged for a piece and are not
equipped with the accompanying documentation, the procedure laid down in paragraphs 1 to 3
does not apply and the producers of this fact shall be indicated in the proposal to write.
§ 9
The technical requirements for the storage of elektroodpadů
(1) the storage of elektroodpadů must meet the General requirements for the
the collection (concentration) of the waste according to a special legal
code ^ 2). Warehouses equipped with elektroodpadů must be in accordance with the
the technical requirements laid down in annex 7 of this order, and
operated in accordance with the operating regulations.
(2) the storage and handling of electronic equipment containing dangerous
or controlled substances under special legislation ^ 3)
cause damage to the parts containing dangerous, hazardous or controlled substances and
leakage of these substances. Electronic waste management, that contain hazardous or
controlled substances shall be transported in such a way to avoid their damage
or breakage and leakage of dangerous or controlled substances ^ 4).
(3) operators of depots, they accepted elektroodpadech or their
parts sent for processing continuous recording.
§ 10
Technical requirements for removal of priority substances and components of
elektroodpadů and elektroodpadů processing
(1) interim Processors elektroodpadů lead evidence of accepted
elektroodpadech and ways of their processing in accordance with section 11,
follow the operating procedure and operating device according to journal
Annex No. 7 of this Ordinance.
(2) to remove the elektroodpadů proceed in accordance with the operational
the order and priority of the cut parts and materials listed in the annex
No. 7 of this Ordinance.
§ 11
The way the leadership of continuous registration and reporting method elektroodpadů
(1) operators of installations for the processing, use and disposal of
elektroodpadů lead ongoing records of elektroodpadech and other
waste and ways of dealing with them for electronic waste management and other waste
custom and electronic waste management and other waste, taken, and for each of the
a separate establishment and for every kind of electronic waste and other waste
separately. Interim registration is conducted pursuant to annex 8 to this Ordinance and
contains:
and the date and number of registration) in the register and
(b)) name and surname of the person responsible for the keeping of registers.
(2) the Continuous registration of waste leads to each individual production
the waste. For individual production is considered to be the fulfillment of the Assembly
or waste of the resource, or the receipt of the waste by the designer or
the beneficiary or other person entitled transfer of waste. In cases,
When this is the continuous generation of waste, and the recurring collection
municipal waste is interim registration leads in monthly intervals.
(3) the operators of installations for the processing, use and disposal of
elektroodpadů sent reports on the annual production and the management of their own
I pursuant to electronic waste management for the past year in the form set out in
Appendix 8 to this Ordinance. Form set out in annex 8 to this
the Decree shall also apply for the reporting of annual production and waste management
other than electronic equipment, whose reporting is required under section
paragraph 39. 2 of the Act.
(4) reporting is carried out separately for each separate premises and under the
each type of waste. For devices for mobile waste collection message will be sent to the
Municipal Office municipality with extended competence of the competent
the operator of the equipment or facility that ensures his operation.
(5) the operators of installations for the collection elektroodpadů lead lead
the register referred to in paragraph 1 and sent to the reporting of annual production and
management of waste referred to in paragraph 3, in the event that the device is used
at the same time for the processing, use or disposal of elektroodpadů.
section 11a
The method of calculating the level of utilization of electronic waste
(1) the level of use of electronic waste for the purposes of compliance with the obligations laid down
in § 37 m, paragraph. 3 of the Act shall be calculated for each group of electrical equipment
as a percentage of the weight of the waste, which after proper selective processing
electronic waste in accordance with section 10, paragraph 1. 2 enter the equipment for recycling
or use, including the preparation for reuse, and the total weight of the
backward taken electrical and electronic waste collected separately in the
each group of electrical and electronic equipment. This calculated share is expressed in the
percentage.
(2) to the level of utilization of electronic waste referred to in paragraph 1 shall not
activities prior to the recycling or recovery of electronic waste, such as
for example, storage, sorting, or editing.
PART THE THIRD
More financing conditions
§ 12
More detailed conditions for the financing of waste electronic equipment originating in
of households listed on the market after day 13. August 2005
(1) the manufacturer, who shall carry out the duties within the individual system
laid down for the management of electronic equipment from private households,
placed on the market after day 13. August 2005, provide a guarantee for the purposes of its
funding to ensure the management of all electronic waste management of these
the device so that:
and tied) shall establish a bank account and cash account are stored on this
the means referred to in paragraph 2, or
(b)) shall conclude an insurance contract in accordance with paragraph 4.
(2) if the financial guarantee provided in the form of earmarked
bank account, store the producers on this account in accordance with the plan
ensure deposit of funds, at least once a
the calendar quarter, cash. The minimum amount of such
the cash flow is calculated as a sum of multiples of the contributions on the
historic WEEE and the amount of electrical and electronic equipment, which the manufacturer
placed on the market in the previous year, expressed in units or in
kilograms. In the framework of the annual reports on the implementation of the obligations of the manufacturer shall
the statement and shall ensure the plan deposits funds on the next
year. The interest on the funds in the bank account shall become bound
part of the funds to ensure.
(3) the model application for consent of the Ministry, with the use of funds
from earmarked bank account is given in annex No 9 of this
the Decree.
(4) if the financial guarantee provided in the form of insurance, it must be
the indemnity agreed upon, at least in the amount of funds
going to bound the bank account referred to in paragraph 2. A copy of the enclosed
a valid insurance contract is annexed to the proposal to write.
(5) the producers pay contributions to the management of electronic equipment
originating in households listed on the market after day 13. August 2005 into
the collective system in the manner prescribed by the operator of a collective
the system under section 5, which assesses the Ministry prior to registration to the list.
section 13
More detailed conditions for the financing of waste electronic equipment originating in
of households listed on the market to day 13. August 2005
Producers pay contributions to the historical electrical equipment into the
the collective system in the manner prescribed by the operator of a collective
the system under section 5, which assesses the Ministry prior to registration to the list.
§ 14
More detailed conditions for financing the management of electronic waste management
Producers, who performs in the framework of the collective system of the obligations laid down
for the management of electronic waste management, pay contributions in the manner provided
operator of the collective system under section 5, which assesses
the Ministry prior to registration to the list.
§ 14a
More detailed conditions for financing the management of electronic waste from solar
panels placed on the market after 1 January 2007. January 2013
(1) the manufacturer who fulfils the obligations laid down for dealing with
electronic waste from solar panels placed on the market after 1 January 2007. January
2013 in the framework of the individual or the solidarity system, imposing on the assigned
bound bank account under section 37p paragraph. 1 of the Act, the funds before the
placing on the market of solar panel. The minimum amount of these cash
the funds shall be calculated as a multiple of the weight of solar panels,
in the given period of time to market, and the rates as calculated according to annex No.
10 of this Decree.
(2) the request for consent of the Ministry of the pattern with the use of funds
from earmarked bank account is given in annex 9 to this
the Decree.
(3) in the annual report referred to in section 6, the manufacturer shall indicate the Bill imposed and
selected funds earmarked from the bank account.
(4) the minimum amount of contributions by the producers, who carries out the obligations laid down
for the management of electronic waste from solar panels placed on the market after
on 1 January 2002. January 2013 in the framework of the collective system, operator
the collective system to match the times the weight of the solar
the panels, which the manufacturer during the period stated on the market, and the rates calculated
in accordance with annex 10 to this Decree. Selected funds
the operator system from manufacturers, who in the framework of this
the collective system fulfils the obligations under section 37p paragraph. 1 of the Act, and of the
resulting revenues can be used exclusively to ensure
the financing of the collection, separate collection, treatment, recovery and
the removal of electronic waste from the solar panels, which were
removed and separately collected in the Czech Republic, including the necessary
the administrative costs connected with the fulfilment of these obligations.
Cross-financing between the activities of the management of electronic waste from the
solar panels placed on the market after 1 January 2007. January 2013 and other
the activities of the operators of the collective system is not permitted.
(5) in the case of cancellation of the collective system operator, in which
There is no assumption of obligations relating to the management of electronic waste
from the solar panels and its financing, pursuant to section 37p paragraph. 1 of the law
the legal successor, the funds may be selected from the manufacturers,
who in the framework of this collective system fulfils the obligations imposed by § 37p
paragraph. 1 of the Act, including the proceeds from them are converted only to another
the collective system, which will take over ensuring the fulfilment of these
the obligations of the manufacturer, or the manufacturer set up by tied Bank
account, as regards the funds selected from this manufacturer.
section 14b
More detailed conditions for financing the management of electronic waste from solar
panels placed on the market before 1 January 1998. January 2013
(1) Minimum total amount of contributions to the financing of the management of
electronic waste from solar panels placed on the market before 1 January 1998. January
2013 shall be calculated as a multiple of the weight of all the solar panels in each
solar power plant, for which the operator has concluded a contract with the
operator of the collective system under section 37p paragraph. 2 of the Act, and rates
calculated in accordance with annex 10 to this Decree.
(2) the funds selected by the operators of solar power plants in
the framework of the implementation of their obligations under section 37p paragraph. 2 of the Act, and the proceeds from the
their temporary investments may be used only to ensure the
the funding transfer for processing, recovery and disposal of electronic waste from
the solar panels, which were intended, these funds
including the necessary administrative costs associated with the implementation of these
duties. Cross-financing between the activities of the waste
electronic waste from solar panels placed on the market before 1 January 1998. January
2013 and the other activities of the operator is not a collective system
permissible.
(3) the operator of a collective system of managed funds
obtained from contributions under section 37p paragraph. 2 of the Act so that the
ensure management accountability, in particular separately from
other funds and separately from the funds
obtained from contributions to the financing of the management of electronic waste from the
solar panels placed on the market after 1. January 2013. The operator
the collective system stores all the contributions selected from the operators
solar power plants under section 37p paragraph. 2 of the law on special bank
account in the Bank, based in the Czech Republic or in a branch office of a foreign
banks in the Czech Republic. An overview of the status of this account is part of the annual
the report referred to in section 6.
(4) the money saved in a bank account in accordance with paragraph 3 may
before using the direct fulfilment of the obligations under section 37p paragraph. 2
the law temporarily invested in
and bonds, whose issuer) is the Czech Republic or the Czech national
the Bank,
b) bonds or other similar securities representing right on
the repayment of the amount owed, which the issuer is a Member State of the European
the Union or a Member State of the Organisation for economic cooperation and development
(OECD) or the Central Bank of that State and, where appropriate, the rating
the rating of the issuer thereof, are among the top 5 rating categories
long-term liabilities in the investment grade rating
Agency ^ 14) or between the comparable rating category other recognised
the rating agencies) and ^ 15 issued by a recognised rating agency,
c) bonds or similar securities representing right on
the repayment of the amount owed, which is the issuer of the European financial
stability, the European Central Bank, the World Bank, the International Monetary
Fund or any other international financial institution whose liabilities are
guaranteed by the States which are members of it, and by the Czech National Bank
writes to the list that leads, d) money market instruments, which
the issuer is the Czech Republic or the Czech National Bank.
(5) a description of the investment, its amount and its duration are included in the annual
the report referred to in section 6. The funds temporarily invested in accordance with the
paragraph 4, including the proceeds from them must be converted back to the Bank
the account referred to in paragraph 3.
(6) in the event of cancellation the operator system, which
There is no assumption of obligations relating to the management of electronic waste
from the solar panels and its financing, pursuant to section 37p paragraph. 2 of the Act
the legal successor, the funds may be selected from the
operators of solar power plants, including the proceeds from their temporary
transferred to another investment only a collective system, which
ensuring the fulfilment of the obligations of the operator takes over solar plant
pursuant to section 37p paragraph. 2 of the Act.
(7) ensure that the take-back obligations, separate collection,
processing, recovery and disposal of electronic waste from solar panels in the
the extent of one-third of the total weight of all the solar panels
placed on the market before 1 January 1998. January 2013 from each solar power, not
However, before to 1. January 2019, the operator shall submit to the collective
the system operator of solar power plants, interim financial settlement,
stating an overview of the costs connected with the fulfilment of these obligations
on the one hand and the proportional amount of the contributions received from the operator
solar power plants including the proceeds from their temporary investment, if
achieved, on the other hand. Any difference shall be settled
the operator of a collective system and operator of solar power plants
between them, so that the collective system operator returns
the operator of solar power plants within one month of the submission of the
ongoing financial settlement surplus on hand received contributions
and the proceeds from their temporary investment or imposing additional
cover the costs incurred in the same period of maturity. The same
in a way, the operator shall carry out a collective system and the operator
solar power plant following continuous financial settlement
ensure fulfilment of the obligations under the first sentence in the range of two-thirds of the
the total weight of all the solar panels placed on the market before 1 January 1998.
January 2013 from each solar plant and the final financial settlement
After the full compliance with such obligations.
§ 14 c
Breakdown of costs and revenues in connection with the financing of the management of
electronic waste from solar panels
(1) the operator of a collective system to be broken down according to the costs and revenues
the purpose to which they have been incurred by or to which they are related. This breakdown
is at least as detailed to allow
and the separate financing of waste management) with electronic waste from the
solar panels and other activities of the operator of a collective
the system,
(b) that there is no validation) to cross-financing between the activities
the management of electronic waste from the solar panels and other activities
the operator of a collective system,
(c) the separate tracking of proceeds from) the contributions of the individual producers, and
separate tracking of revenue from contributions from individual operators
solar power plants
(d) a separate track) transmission to process solar panels
from individual operators of solar power plants, who carries out the
obligations under section 37p paragraph. 2 of the Act, and
(e) separate provision) the fulfilment of obligations pursuant to section 37p paragraph. 1
and under section 37p paragraph. 2 of the Act.
(2) breakdown of costs and revenue referred to in paragraph 1 is based on the operator
the collective system of valuation in accordance with the Act on accounting ^ 16).
PART THE FOURTH
CROSS-BORDER TRANSPORT OF USED ELECTRICAL EQUIPMENT
section 14 d
Authentication method and demonstrating the functionality of used electrical equipment
(1) the functionality of the used electrical equipment shall be verified by performing a test
functionality. Functional test must always be carried out at least
Verify the functionality of the main functions of the used electrical equipment.
(2) the functional Test must be carried out by a person who is professionally
eligible and is a holder of the relevant permissions and certificates referred to in
the legislation governing the State technical supervision over the safety of
work ^ 17) and holds a business licence to do business in the field of
"Installation, repairs, revisions and tests of electrical devices", and in the
accordance with the procedure laid down in annex 11 to this Decree, if
used electrical and electronic equipment is transported from the Czech Republic.
section 14e
Documentation and other documents to accompany the cargo transported
used electrical equipment
(1) the documentation referred to in § 37r paragraph. 4 of law make up the test report
the functionality made in accordance with section 14 d and proof of the content of hazardous
substances in electrical and electronic equipment transported.
(2) in the event that the electrical equipment is transported from another
State than from the Czech Republic and the function test was not performed in accordance with
section 14 d of paragraph 1. 2, the documentation must include the test in functionality
made under comparable conditions in another Member State of the European
the Union or in another State, representing the European economic area.
(3) in the documentation must be provided
and electronic equipment and its) name of the manufacturer, if known,
(b)) the indication of the Group and the subgroup of electrical equipment according to annex No 1 to
This Decree,
(c)) the identification or type the item number, if any,
(d)) year of production, if known,
(e) the name or names), and the last name or the business name or the name of the
the person responsible for performing the test in functionality and address of the registered office of the
of the person,
(f) the result of the test in functionality) made pursuant to section 14 d, its type and date
its implementation and
g) data on the content of hazardous substances in electrical and electronic equipment.
(4) in the event that the electrical equipment is imported from outside the State
The European Union or the European economic area shall be
documentation attached documents proving compliance with the requirements laid down
Regulation on the restriction of use of certain hazardous substances in
electrical and electronic equipment ^ 18).
(5) each consignment carried used electrical equipment, which
in particular, make up the shipping container or freight vehicle, a further
shall be accompanied by
and the transport document), for example, a bill of lading under the Convention on
the contract for the international carriage of goods (CMR) or
Convention concerning international carriage by rail (COTIF) ^ 19),
(b) the particulars of the Eee,)
(c)), the list of dangerous substances contained in transport
electrical and electronic equipment and
(d) the statement by the holder of the electronic equipment) carried on its
the responsibility for fulfilling the obligations referred to in § 37r law.
(6) if the used electrical equipment is transported from the Czech Republic,
be used for the preparation of documentation and the documents referred to in paragraph 5
(a). (b) to (d))) form, specimens of which are given in annex 12 to the
This Decree.
(7) the dossier must be securely but not permanently fixed, either
directly to the non-packed electrical equipment, or on their packaging, so that the
readable without expanding it. The documents referred to in paragraph 5
must be equipped with the driver of the vehicle, the driver of the train, the leader of the vessel or
the Commander of the aircraft throughout the transport.
section 14f
The ban on cross-border transport of used electrical equipment containing
certain dangerous substances
As may be used in the sense of § 37r paragraph. 1 of the law are transported
electrical and electronic equipment containing
and) controlled substances under specific legislation for the treatment of
substances that Deplete the ozone layer "^ 20),
(b)) ^ 21), PCBS
c) component containing asbestos, or
d) radioactive substances.
PART THE FIFTH
TRANSITIONAL PROVISIONS
§ 15
Transitional provisions
(1) the annual report on the implementation of the obligations of the producers for the previous calendar year
be sent to the manufacturers of electrical and electronic equipment for the first time for the year 2006.
(2) Information about treatment, recovery and disposal of elektroodpadů on
form set out in annex 8 of this order shall be sent for the first time
the competent municipal office municipality with extended powers for the year 2006.
(3) the manufacturer, who until June 12. October 2005 fulfils its obligations
through the collective system operator, who was not in the
on this day to the list of written, to this day looking as well as on the
the manufacturer, who shall carry out their obligations through the operator
the collective system, which in the list on the date 12. October 2005 entered.
After day 12. October 2005 in accordance with the first sentence of the manufacturer shall carry out their obligations
through the collective system operator, that is written to the
The list.
PART SIX
The EFFECTIVENESS of the
section 16 of the
This Decree shall take effect on the date of its publication.
Minister:
RNDr. Ambrozek in r.
Annex 1
List of electrical equipment falling within each group set out in the
Annex No. 7 law and electrical equipment that is extracted from the groups of electrical equipment
referred to in annex 7 to the law ^ +
I. Subgroup of Eee, EEE groups that fall within the
referred to in annex 7, part I, Act
1. large household appliances
1.1 United refrigeration equipment
1.2 Refrigerators, combination refrigerator and freezer
1.3 the freezer
1.4 other large appliances used for refrigeration, conservation and
storage of food
1.5 washing machines
1.6 the dryer
1.7 the dishwasher
1.8 the baking equipment
1.9 electric stoves
1.10 Electric stove
1.11 the microwave oven
1.12 other large appliances used for cooking and other processing
food
1.13 Electric heaters
1.14 electric radiators
1.15 other large appliances for heating rooms, beds and seating
furniture
1.16 electrical fans large
1.17 air conditioners
1.18 Other, suction ventilation and air-conditioning equipment
1.19 Other large home appliances in another subset not included
2. Small household appliances
2.1 vacuum cleaner
2.2 Cleaning machines for carpets
2.3 Other equipment for cleaning
2.4 equipment used for sewing, knitting, weaving and other processing
textiles
2.5 the irons and other appliances for ironing, mangling used and more
care of clothing
2.6 the toaster
2.7 the frying pot
2.8 Grinders, coffee machines and equipment for opening or sealing containers or
packaging
2.9 Electric knives
2.10 Appliances for hair cutting, hair drying, tooth brushing, shaving,
massage or other body care
2.11 the Clock, alarm clocks, and equipment for the purposes of measurement, indication or
time registration
2.12 Scales
2.13 the small electric fans
2.14 Other small home appliances in another subset not included
3. the establishment of information technology and telecommunications equipment
3.1 Large mainframe computers, servers
3.2 Minicomputers
3.3 Printing Unit (separate central printers)
3.4 personal computers (including the basic processing unit, mouse,
monitors and keyboards)
3.5 Laptops (including the basic processing unit, mice, monitors, and
keyboards)
3.6 Laptops
2.3 Electronic diaries
2.4 Printer
2.4 copying equipment
3.10. Electrical and electronic typewriters
3.11 the Pocket and desk calculators
3.12 Other products or equipment for the collection, storage, processing,
presentation or communication of information by electronic means in the other
subset not included
3.13 the User terminals and systems
3.14 Teletypes
3.15 Faxes
3.16 the Phones
3.17 payphones
3.18 wireless phones
3.19 mobile phones
3.20 Recorders
3.21 Other products or equipment for the transmission of audio, video and other
information by telecommunications in another subset not included
4. Consumer equipment and solar panels
4A Consumer devices
4.1 Radio sets (clock radios, radio cassette players)
4.2 Tv
4.3 video camera
4.4 video recorders
4.5 Hi-Fi recorders
4.6 Audiozesilovače
4.7. Musical instruments
4.8 Other products or equipment for the purpose of recording or reproduction
sound or image, including signals or technologies for the dissemination of sound
or the image other than the telecommunications (consumer equipment) in other
subset not included
4B solar panels
5. Lighting equipment
5.1 Luminaires for fluorescent lamps with the exception of luminaires from households
5.2. Linear fluorescent lamps (trubicové)
5.3 compact fluorescent lamps
5.4 High-pressure discharge lamps including high-pressure
sodium, metal halide, and mixed lamps
5.5 low-pressure sodium discharge lamps
5.6 Other lighting equipment or equipment for distribution or control of
lighting, incandescent light bulbs except directly in the other subgroup
not listed
6. Electrical and electronic tools (except large stationary
industrial tools)
6.1 Drills
6.2 Saws
6.3 the sewing machines in addition to the equipment used in households falling
under Group 2
6.4 equipment for turning, milling, sanding, grinding, sawing,
cutting, shearing, drilling, making holes, punching, folding, bending or
similar processing of wood, metal and other materials
6.5 tools for riveting, nailing or screwing or for
removing rivets, nails, screws or similar purposes
4.1 tools for welding, soldering or similar use
6.7 equipment for spraying, spreading, dispersion or processing of liquid or
gaseous substances by other means
6.8 tools for mowing or other gardening activities
4.3 other electric and electronic tools in the other subgroup
not listed
7. Toys, leisure and sports
7.1 electric trains or car racing sets, toy
7.2 Manual drivers video games
7.3 video games
7.4 Computers for biking, diving, running, rowing, etc.
7.5 sports equipment with electric or electronic components
7.6 coin Slot machines
4.8 other toys, leisure and sports in the other subgroup
not listed
8. Medical devices with the exception of all implanted and infected
products used
8.1 in radiotherapy **
8.2 in cardiology
8.3 in hemodialysis
5.2 in the respiratory and anaesthesia practice
5.3 in nuclear medicine *
5.3 in in-vitro diagnostics
5.4 for the analysis of physiological functions
5.5 to chill for the purposes of the provision of health care
5.5 to diagnose with ultrasound
8.10 in other activities, such as the detection, prevention, monitoring,
treatment, alleviation of disease, injury or disability in the other subgroup
not specified.
9. monitoring and control instruments
9.1 smoke detectors
9.2 heating Regulators
9.3 Thermostats
9.4 instruments for measuring, weighing or adjusting for household or
used as laboratory equipment
5.9 Other monitoring and control instruments used in industrial
devices (for example, in the control panel)
6.0 Other instruments for monitoring and control in the other subgroup
not listed
10. Dispensing machines
10.1 dispensers for hot drinks
10.2 dispensers for hot or cold bottles or cans
6.4 dispensers for solid products
10.4 dispensers for money
6.5 all equipment issued by automatically all kind of products
in the subgroup other unlisted
II. The subgroup of Eee, EEE groups that fall within the
referred to in annex 7, part II of the Act ***
1. Equipment for heat exchange
1.1 the refrigerator
1.2 the freezer
1.3 device automatically providing the chilled products
1.4 air conditioning equipment
1.5 the dehumidifying equipment
1.6 heat pumps
1.7 oil Radiators and other equipment for the heat exchange
using the heat exchange liquid other than water
1.8 Other equipment for heat exchange in a different subset of unlisted
2. Screen, monitors and equipment containing larger screen area
than 100 cm2
2.1 Screen
2.2 Tv
2.3 LCD photo frames
2.4 Monitors
2.5 Laptop
2.6 Laptops
2.7 Other equipment not mentioned in the other subgroup
3. Light sources
3.1 Direct (trubicové) fluorescent lamps
3.2. Compact fluorescent lamps
3.3 fluorescent lamps
3.4 High intensity discharge lamps, including high-pressure sodium lamps
and metal halide lamps
3.5 low pressure sodium lamps
3.6 LED lamps and other lighting devices with built-in LED
diodes
3.7 Other light sources in the other subset not included
4. large installations which any external dimension exceeds 50 cm
4A large equipment in addition to the solar panels
4.1 washing machine
4.2 the dryer
4.3 the dishwasher
4.4 the stove and oven
4.5 Electric ranges
4.6 Electrical hob
4.7 lighting fixtures
4.8 a device reproducing sound or image
4.9 the Music device (in addition to the church organ)
4.10 the equipment used for knitting and weaving
4.11 mainframes
4.12 the Large printer
4.13 copying equipment
4.14 the great winning Sterling machines
4.15 the Large medical devices
4.16 the great instruments for monitoring and control
4.17 Large dispensers on the products and money
4.18 other large appliances in a different subset of unlisted
4B solar panels
5. Small device, with no external dimension does not exceed 50 cm
5.1 the vacuum cleaner
5.2 machines for carpet cleaning
5.3 sewing machines
5.4 lighting fixtures
5.5 the microwave oven
5.6. Ventilation device
3.5 Iron
5.8 the toasters
3.7 Electric knives
5.10 Electrical kettle
5.11 the clocks and watches
5.12 Electric shavers
5.13 Scales
5.14. Equipment for hair and body care
5.15 Calculators
5.16 radio receivers
5.17 Camcorder
5.18 video recorders
5.19 Hi-Fi equipment
5.20 musical instruments
5.21 the spawning stock sound Device or image
5.22 electrical and electronic toys
5.23 sports equipment
5.24. Computers for biking, diving, running, rowing, and similar
activities
5.25 smoke detectors
5.26 control valves, thermostats, heating
5.27 Small electrical and electronic tools
5 Small medical devices
5.29 small tools for monitoring and control
5 Small dispensers on products
5.31 the small device with built-in solar panels
5.32 the other small equipment in another subset not covered
6. Small equipment of information technology and telecommunications equipment,
No external dimension of which does not exceed 50 cm
3.8 mobile phones
6.2 GPS navigation
6.3 the pocket calculators
6.4 Routers
4.0 Personal computer
4.1 Printer
4.2 Phones
4.2 Other small equipment of information technology and telecommunications
device in a different subset of unlisted
____________________
Notes:
Broken down by the categories also applies to non-electrical equipment
households.
Part I shall apply to the 14. August 2018.
* In Act No. 123/2000 Coll., on medical devices and on the change
some related laws, as amended, are
medical devices listed as medical devices.
Part II shall apply from 15. August 2018. ".
Annex 2
For registration of producers to the list for the individual and solidarity system
--------------------------------------------------------------------------------------------------------
Volume
--------------------------------------------------------------------------------------------------------
Identifying information:
--------------------------------------------------------------------------------------------------------
1 the name and surname or
business company
--------------------------------------------------------------------------------------------------------
2 a. s. s. r. o. v. o. s. k. s. cooperative of natural person
---- Právní forma ---------------------------------------------------------------------------
3 other
--------------------------------------------------------------------------------------------------------
4 the address of the registered office
--------------------------------------------------------------------------------------------------------
5 the address of the place of residence
--------------------------------------------------------------------------------------------------------
6 IDENTIFICATION NUMBER TIN
--------------------------------------------------------------------------------------------------------
The identification data of the foreign producer:
--------------------------------------------------------------------------------------------------------
7 the name and surname or
name and legal form
--------------------------------------------------------------------------------------------------------
8 address
--------------------------------------------------------------------------------------------------------
9 Foreign registration and the registration number
--------------------------------------------------------------------------------------------------------
The identity and contact details of the statutory body manufacturer
--------------------------------------------------------------------------------------------------------
10 the name and surname Signature
--------------------------------------------------------------------------------------------------------
11 contact address
--------------------------------------------------------------------------------------------------------
12 Email
--------------------------------------------------------------------------------------------------------
13 Phone
--------------------------------------------------------------------------------------------------------
A list and description of the electrical equipment
--------------------------------------------------------------------------------------------------------
Group Subgroup of marketed Quantity Quantity placed on the market
in the previous year in the submission of the proposal
------------------------------------------------------
tons of pieces a ton of pieces
--------------------------------------------------------------------------------------------------------
14 1.
--------------------------------------------------------------------------------------------------------
15 2.
--------------------------------------------------------------------------------------------------------
16 3.
--------------------------------------------------------------------------------------------------------
17, 4a.
----------------------------------------------------------------------------------------------------
4B.
--------------------------------------------------------------------------------------------------------
18 5.
--------------------------------------------------------------------------------------------------------
19 6.
--------------------------------------------------------------------------------------------------------
20 7.
--------------------------------------------------------------------------------------------------------
21 8.
--------------------------------------------------------------------------------------------------------
22 9.
--------------------------------------------------------------------------------------------------------
23 10.
--------------------------------------------------------------------------------------------------------
24 marking products
(marking, the manufacturer, the date of entry
on the market and the graphic symbol)
-Annex to the proposal for registration
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
II.
--------------------------------------------------------------------------------------------------------
The form of the financial guarantees referred to in section paragraph 37n. 2 of the law on the registration of the design-annex
--------------------------------------------------------------------------------------------------------
25 tied the bank account (including reinsurance)
--------------------------------------------------------------------------------------------------------
26 insurance (including the methodology of calculation of the amount of indemnity)
--------------------------------------------------------------------------------------------------------
The method of financing the collection, treatment, recovery and disposal of WEEE arising
of households according to the § 37n law-annex to the proposal writing
The method of financing of the collection, separate collection, treatment, recovery and disposal of electronic waste
of solar panels under section 37p paragraph. 1 of law-annex to the proposal writing
--------------------------------------------------------------------------------------------------------
27 the methodology for the funding of waste electronic equipment placed on the market the then 13. August 2005
According to § 37n paragraph. 1 of the law, including a plan to ensure the deposits of funds on purpose
bank account
--------------------------------------------------------------------------------------------------------
28 the methodology for financing the management of electronic waste from solar panels placed on the market after the date of
January 1, 2013 pursuant to section 37p paragraph. 1 of the law
--------------------------------------------------------------------------------------------------------
29 financial management proposal to ensure the waste electronic equipment placed on the market after the date of
13. August 2005-accounting
--------------------------------------------------------------------------------------------------------
30 Proposal management to financial collateral arrangements dealing with electronic waste from solar panels
placed on the market after 1 January 2007. January 13-accounting
--------------------------------------------------------------------------------------------------------
31 the proposed control mechanisms management while ensuring the waste electronic equipment referred to
on the market after a day of the 13. in August 2005, the subscription plan and the financing of its waste recycling for a certain period
(1, 3 or 5 years)
--------------------------------------------------------------------------------------------------------
32 proposal for management control mechanisms to ensure the management of electronic waste from solar
panels placed on the market after 1 January 2007. January 2013
--------------------------------------------------------------------------------------------------------
33 Annex a financial collateral management of historical electrical-contract with
operator of the system, including how the marketing contribution to the historic WEEE
in the sale of electrical equipment
--------------------------------------------------------------------------------------------------------
The method of financing separate collection, treatment, recovery and disposal of electronic waste in accordance with § 37o law
-Annex to the proposal writing
--------------------------------------------------------------------------------------------------------
34 the methodology for the funding of elektroodpadů according to § 37o law
--------------------------------------------------------------------------------------------------------
35 proposal for accounting for electronic equipment in accordance with § 37o law
--------------------------------------------------------------------------------------------------------
36 Proposal of control mechanisms for the management of financial resources for electronic waste management in accordance with
§ 37o law
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
III.
--------------------------------------------------------------------------------------------------------
How to carry out the duties of the annex of the proposal on the write-
--------------------------------------------------------------------------------------------------------
37 of the annex to the identification data of the manufacturer
--------------------------------------------------------------------------------------------------------
38 Annex describing how information distributors and final users training postponed
electrical equipment outside of the municipal waste and of designated places according to § 38 paragraph. 4 (b). and the law)
--------------------------------------------------------------------------------------------------------
39 Annex describing how information on the role of the final user in reusing
electrical equipment and material or other use of elektroodpadů and about the possible harmful effects of
hazardous substances in electrical and electronic equipment on the environment and on human health by
§ 38 paragraph. 4 (b). (b)), and (c)) of the Act
--------------------------------------------------------------------------------------------------------
40 Annex describing how information processors elektroodpadů on technical requirements necessary
to its processing and preparation for reuse under section 37l paragraph. 2 of the Act
--------------------------------------------------------------------------------------------------------
41 Annex with a list of places taking back Eee, the design type of the contract with the operator
Jobs collection
--------------------------------------------------------------------------------------------------------
42 Annex describing the collection network for the separate collection of elektroodpadů, proposal for a type of contract with
the operator places the separate collection of
--------------------------------------------------------------------------------------------------------
43 Annex describing ensure processing removed Eee aodděleně captured
elektroodpadů pursuant to section 37l paragraph. 3 of the law
--------------------------------------------------------------------------------------------------------
Next annex transmitted YES NO
--------------------------------------------------------------------------------------------------------
44 contract concluded between producers involved in the solidarity system
--------------------------------------------------------------------------------------------------------
45 Treaty with the collective system of financing the historic WEEE
--------------------------------------------------------------------------------------------------------
46 the Treaty establishing an earmarked bank account and statement of account
--------------------------------------------------------------------------------------------------------
47 Treaty of insurance and the payment of insurance premiums
--------------------------------------------------------------------------------------------------------
48 Written credentials, which was determined by the authorised representative
--------------------------------------------------------------------------------------------------------
49 additional attachments not listed elsewhere in annex No. 2 (specify the number):
--------------------------------------------------------------------------------------------------------
The decision (to be completed by the Ministry)
--------------------------------------------------------------------------------------------------------
the date of delivery of the 50 on the list:
--------------------------------------------------------------------------------------------------------
51 release date a decision on entry in the List:
--------------------------------------------------------------------------------------------------------
Eee producer registration number 52:
--------------------------------------------------------------------------------------------------------
The explanatory notes
Act means the Act No. 185/2001 Coll., on waste and amending certain
other laws, as amended.
Annex No 2 shall use the manufacturers and authorized representatives, who shall carry out their
the obligations referred to in part four of the title II of part 8 of the Act in the context of the
the individual or the solidarity system, such as the form for the purpose of filing
the proposal on the entry in the list or in the event that the manufacturer or authorized
the representative was invited by the Ministry to prove the documents showing that
performance of his duties is assured. In this case, the form
fill out only the data that has changed. The manufacturer shall also mean
also authorized representative pursuant to § 37q law.
The explanatory notes to part I.
Identification data
Row 1-to be completed, where appropriate, the name and surname, name (only for
natural persons) or the trade name of the manufacturer, as it is registered in the commercial
the register.
Row 2-is the legal form of the manufacturer; If it is not listed, fill in the
its name in row 3.
Row 3-fills with a different name, legal form of the manufacturer if he is not listed on the
line 2.
Row 4-fill in the exact and full address of the registered office of the manufacturer-Street, the village,
ZIP/POSTAL CODE.
Row 5-fills the only manufacturer who is a natural person.
Row 6-to be completed by the person's identification number (IČO) and tax
identification number (Tin), if the producers are allocated. If the manufacturer
Less than eight-digit IDENTIFICATION NUMBER, make up the left zero to the total number of 8.
The identification data of the foreign manufacturer
To be completed only in the case that the proposal to write serves authorized representative
According to § 37q, paragraph. 1 or paragraph. 2 of the Act.
In rows 7 through 9, fill in the identification data relating to the
foreign manufacturers under section 37 g (a). (e) section 4 of the Act) or to the person
According to § 37q, paragraph. 2 the first sentence of the law, who's in the Czech Republic
determine the authorised representative.
Row 9-enter the registration, which is a foreign person registered
If it is registered, and the registration number.
The identity and contact details of the statutory body manufacturer
In rows 10-13 shall be filled in the required information related to the
the manufacturer, the authority and the signature of the statutory body. If the manufacturer
natural person, fill in their own details and attach your signature.
A list and description of the electrical equipment
Lists the details of the electrical and electronic equipment, which the manufacturer launches in Czech
Republic.
In lines 14 to 23 shall be completed for each data group
electrical equipment according to annex No. 7 of the Act.
In line 17, fill out the information for solar panels separately under
the designation of the Group 4b. To 14. August 2018 apply Group
the electrical equipment referred to in part I of annex 7 of the Act. From 15. August
2018 apply Group electrical equipment referred to in part II of Annex No. 7
Act (lines 20 to 23 do not apply).
-Subgroup in that group will bring the number of subgroups according to annex No.
1. To 14. August 2018 shall apply the subgroup referred to in part I of the annex No.
1 and 15. August 2018 shall apply the subgroup referred to in part II of the annex
No 1.
The quantity placed on the market in the previous year and in the year of submission of the proposal-
in the column indicating the amount of electrical and electronic equipment, which the manufacturer said on
the market in the Czech Republic in the previous calendar year, and
the amount of electrical and electronic equipment, which the manufacturer on the market in the Czech Republic
in the submission of the proposal to the entry in the list. The data shall be reported in tonnes per
three decimal places and at the same time, enter the quantity in pieces.
Row 24-in the annex, for each of the products (if they are not marked
differently), indicating the manner in which the products will be marked by date
production, the brand for the identification of the manufacturer, the marking for the purposes of reverse
the collection, for example. the attached copy of the used the symbol of the brand.
Explanatory notes to part II.
The form of the financial guarantees referred to in section paragraph 37n. 2 annex proposal to act-
the registration of
Row 25-the number of earmarked bank account plan
ensure that must contain:
-the calculation of the minimum amount of funds to be deposited on the account,
-the amount of the monthly deposits to the account, IE. plan to ensure the deposits of cash
funds tied to bank account.
An indication of the application a copy of the agreement on the establishment of the Bank earmarked
the account referred to in part III, line 46.
Row 26-enter the number of concluded insurance contract and the method of calculation
for an agreed amount of indemnity; an indication of the application a copy of the insurance policy
the Treaty outlined in part III, line 47.
Line 27 to 36-fill out the names of the attachments, always in the line to the required
the requested data. Filling out the name of the attachment may be eg. Annex s
the number of the respective line with which is filled in.
The method of financing the collection, treatment, recovery and disposal
electrical and electronic equipment originating in the household according to § 37n law
The method of financing separate collection, the collection, processing,
the use and removal of elektroodpadů from solar panels under section 37p
paragraph. 1 of law-annex to the proposal writing
Row 27-a description of the way in which they proceeded in setting
contribution to the electrical and electronic equipment put on the market after day 13. August 2005. As
analogous to the post that will be levied on historical e-scrap
the collective system.
Line 28-calculation of the amount of funds stored on the assigned
bound to the bank account, including detailed supporting documents, from which the manufacturer
When the calculation was based.
Row 29-a detailed description of how the management of the contribution to the
electrical and electronic equipment put on the market after day 13. August 2005-eg. posting
the operators of collection sites, svozovým companies, processors,
General awareness.
Row 30-for solar panels placed on the market after 1 January 2007. January 2013
fills as in line 29.
Line 31-description of how to control the management of the contribution to the
electrical and electronic equipment put on the market after day 13. August 2005, so that
prevent the use of the allowance for purposes other than what is specified.
Row 32-for solar panels placed on the market after 1 January 2007. January 2013
fills as in line 31.
Row 33-financial collateral management with historical
electronic equipment-the involvement of a collective scheme, including how
marketing contribution to the historic WEEE in the sale
electrical and electronic equipment.
This line does not apply to solar panels.
The method of financing separate collection, treatment, recovery and disposal
elektroodpadů according to § 37o law-annex to the proposal writing
Row 34-e funding methodology according to § 37o law-
the resolution of the equipment placed on the market after day 13. August 2005 and before the date of
August 13, 2005, replacing the new piece for piece products.
Row 35-method of accounting for e-scrap in accordance with § 37o
the law.
Row 36-description of the control of the management of financial resources for the
e-scrap according to § 37o law so as to prevent the use of
allowance for purposes other than what is specified.
The explanatory notes to part III.
How to carry out the duties referred to in section 5 of the Ordinance-draft
Lines 37 to 43-fill out the names of the attachments, always in the line to the required
the requested data. Filling out the name of the attachment may be eg. Annex s
the number of the respective line with which is filled in.
Lines 41 and 42-the manufacturer shall submit a list of contracted seats
return or separate collection, type the contract with the competent
bodies, the development plan of the collection network and ensure adequate collection
the vessels related to the kind of electronic waste.
Row 43-the manufacturer shall submit the Treaty to processing establishments,
a description of the processing of electronic waste in facilities and output devices
so, in order to achieve the desired level of material recovery and
reuse. The device must be able to handle type
electronic waste is bound to that group and the type of electrical equipment (must be
separately describe, in particular, for specific waste streams, such as
monitors, fluorescent lamps and discharge lamps, solar panels or cooling equipment).
The other passed to the annex
Row 44 to 49-if the required attachment (as specified in the individual
part of the proposal, the lines) will be in line with a cross the cell in column
YES. If it is not part of the proposal, the annex shall be marked with a cross in the row of the cell
in the column NO.
Row 44-solidarity contract implementation must include:
-subject of the contract
and accession to the second obligation.,
(b). the obligation to pay costs associated with the financing of the collection
and management of electronic equipment from private households and with
isolated collection and handling of electronic waste management.
-the method of the warranty, if one of the contractual obligation of the manufacturer or
extinguished if one manufacturer.
If only one producer, will provide a guarantee under the individual
performance, or shall conclude a contract of solidarity performance with another manufacturer, or
log on to the system, and that everything, including the acceptance of all
liabilities for obligations previously acquired from the original solidarity system.
Row 46-contract on the establishment of an earmarked bank account must
contain provisions that the Bank will allow the drawing of this set up account
only on the basis of a written decision on the approval of the Ministry.
Submitted a copy of the statement of account is acknowledgement of the stored cash
resources from the plan (see the explanatory notes to the line 25).
Row 47-the conclusion of the contract of insurance shall contain provisions on the
transfer of funds from insurance in the event that the manufacturer changes the
How to fulfil their obligations under part four of the title II of part 8
the law. The submission of a copy of the insurance payments.
Row 48-in the event that The authorized representative in writing,
provide proof of written credentials, the manufacturer, that it's for the purpose of carrying out their
duty to determine.
Row 49-in an empty cell on the line 49 the number of annexes to the proposal,
that are not listed elsewhere in annex eg. Comment on the financing of the
historic waste.
The decision of the
Lines 50 to 52 shall not be completed, it is used for the records of the Ministry.
Row 52-registration number manufacturer of electrical and electronic equipment (max. 12 characters) will be
has been allocated in the form of: the serial number of the registration in a given calendar year (5
places)/the last two digits of the calendar year-ECZ, where E stands for
Electrical equipment (e.g. 00001/05-ECZ).
Annex 3
Proposal for the entry in the list of manufacturers for the collective system
--------------------------------------------------------------------------------------------------------
Volume
--------------------------------------------------------------------------------------------------------
Identifying information:
--------------------------------------------------------------------------------------------------------
1 the name and surname or
business company
--------------------------------------------------------------------------------------------------------
2 a. s. s. r. o. v. o. s. k. s. cooperative of natural person
---- Právní forma ---------------------------------------------------------------------------
3 other
--------------------------------------------------------------------------------------------------------
4 the address of the registered office
--------------------------------------------------------------------------------------------------------
5 the address of the place of residence
--------------------------------------------------------------------------------------------------------
6 IDENTIFICATION NUMBER TIN
--------------------------------------------------------------------------------------------------------
The identification data of the foreign producer:
--------------------------------------------------------------------------------------------------------
7 the name and surname or
name and legal form
--------------------------------------------------------------------------------------------------------
8 address
--------------------------------------------------------------------------------------------------------
9 Foreign registration and the registration number
--------------------------------------------------------------------------------------------------------
The identity and contact details of the statutory body manufacturer
--------------------------------------------------------------------------------------------------------
10 the name and surname Signature
--------------------------------------------------------------------------------------------------------
11 contact address
--------------------------------------------------------------------------------------------------------
12 Email
--------------------------------------------------------------------------------------------------------
13 Phone
--------------------------------------------------------------------------------------------------------
A list and description of the electrical equipment
--------------------------------------------------------------------------------------------------------
Group Subgroup of marketed Quantity Quantity placed on the market
in the previous year in the submission of the proposal
------------------------------------------------------
tons of pieces a ton of pieces
--------------------------------------------------------------------------------------------------------
14 1.
--------------------------------------------------------------------------------------------------------
15 2.
--------------------------------------------------------------------------------------------------------
16 3.
--------------------------------------------------------------------------------------------------------
17, 4a.
---------------------------------------------------------------------------------------------------
4B.
--------------------------------------------------------------------------------------------------------
18 5.
--------------------------------------------------------------------------------------------------------
19 6.
--------------------------------------------------------------------------------------------------------
20 7.
--------------------------------------------------------------------------------------------------------
21 8.
--------------------------------------------------------------------------------------------------------
22 9.
--------------------------------------------------------------------------------------------------------
23 10.
--------------------------------------------------------------------------------------------------------
24 marking products
(marking, the manufacturer, the date of the placing on the
the market and the graphic symbol)
-Annex to the proposal for registration
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
II.
--------------------------------------------------------------------------------------------------------
Identification data the operator system
--------------------------------------------------------------------------------------------------------
25 Commercial company or name
operator of the collective system
--------------------------------------------------------------------------------------------------------
26 legal form
--------------------------------------------------------------------------------------------------------
27 address
--------------------------------------------------------------------------------------------------------
28 IDENTIFICATION NUMBER TIN
--------------------------------------------------------------------------------------------------------
29 Phone Email Web site
--------------------------------------------------------------------------------------------------------
The identity and contact details of the statutory authority of the collective system operator
--------------------------------------------------------------------------------------------------------
30 name and surname Signature
--------------------------------------------------------------------------------------------------------
31 contact address
--------------------------------------------------------------------------------------------------------
32 Features
--------------------------------------------------------------------------------------------------------
33 Email
--------------------------------------------------------------------------------------------------------
34 Phone
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
The method of financing the collection, treatment, recovery and disposal of electrical and electronic equipment put on the market
After a day of the 13. August 2005 pursuant to § 37n paragraph. 1 of the law
The method of financing of the collection, separate collection, treatment, recovery and disposal of electronic waste
of solar panels under section 37p paragraph. 1 of law-annex to the proposal writing
--------------------------------------------------------------------------------------------------------
35 the methodology for the funding of waste electronic equipment placed on the market the then 13. August 2005
According to § 37n paragraph. 1 of the law
--------------------------------------------------------------------------------------------------------
36 the methodology for financing the management of electronic waste from solar panels placed on the market after
1 January 2013 pursuant to section 37p paragraph. 1 of the law
--------------------------------------------------------------------------------------------------------
37 the draft financial management to ensure the management of electronic equipment placed on the market after
day 13. August 2005-accounting
--------------------------------------------------------------------------------------------------------
38 the proposal when the financial management to ensure the management of electronic waste from solar panels listed
on the market after 1. January 13-accounting
--------------------------------------------------------------------------------------------------------
39 a proposal of control mechanisms to ensure the management of waste electronic equipment referred to
on the market after a day of the 13. in August 2005, the subscription plan and the financing of its waste recycling for a certain period
(1, 3 or 5 years), and the description of the custom control activities to producers, the včetněminimálního range and the
the frequency of this control activity
--------------------------------------------------------------------------------------------------------
40 Design control mechanisms management while ensuring the disposal of electronic waste from solar
panels placed on the market after 1 January 2007. January 2013 and the description of the custom control activities to producers,
including the minimum of the range and frequency of this control activity
--------------------------------------------------------------------------------------------------------
Financial collateral management with historical electronic equipment (under section 3 of the Act 37n) Financial
ensure the management of electronic waste from solar panels placed on the market before 1 January 1998. January 2013 (according to the
section 37p paragraph. 2 of the law)-annex to the proposal writing
--------------------------------------------------------------------------------------------------------
41 Methodology for calculating the contribution to the historic WEEE including indication of the amount of the contributions for the
each subgroup
--------------------------------------------------------------------------------------------------------
42 on the methodology for the calculation of the contribution to the financing of electronic waste from solar panels
placed on the market before 1 January 1998. January 2013 above, including indication of contributions
--------------------------------------------------------------------------------------------------------
43 proposal for management of funds derived from contributions to the historic WEEE
--------------------------------------------------------------------------------------------------------
44 proposal for management of funds derived from contributions to the financing of the management of
electronic waste from solar panels placed on the market before 1 January 1998. January 2013
--------------------------------------------------------------------------------------------------------
45 Design control mechanisms management of funds derived from contributions to the historical
waste electrical and electronic equipment, sampling plan and financing of recycling on určitéobdobí (1, 3 or 5 years)
and the description of the custom control activities to producers, including the minimum of the range and frequency of this
control activities
--------------------------------------------------------------------------------------------------------
46 Proposal of control mechanisms for the management of funds derived from contributions to the
financing the disposal of electronic waste from solar panels placed on the market before 1 January 1998. January 2013,
the plan collection of waste and its recycling of funding for a certain period (20-25 years)
--------------------------------------------------------------------------------------------------------
47 for information on how to ensure obligations, in particular the financing of the historickýchelektrozařízení in the period
from 13 June 2005. August 2005 into the issue of the decision on registration in the list of
--------------------------------------------------------------------------------------------------------
The method of financing separate collection, treatment, recovery and disposal of elektroodpadů according to § 37o law
-Annex to the proposal writing
--------------------------------------------------------------------------------------------------------
48 methodology for financing the management of electronic waste management in accordance with § 37o law
--------------------------------------------------------------------------------------------------------
49 proposal for financial management to ensure the management of electronic waste management in accordance with § 37o law
--------------------------------------------------------------------------------------------------------
50 Design control mechanisms for the management of financial resources for the management of electronic waste management
According to § 37o Act and the description of the custom control activities to producers, including minimum range and
the frequency of this control activity
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
III.
--------------------------------------------------------------------------------------------------------
How to carry out the duties of the annex of the proposal on the write-
--------------------------------------------------------------------------------------------------------
51 Annex to the identification data of all of the manufacturers and operators of kolektivníhosystému
--------------------------------------------------------------------------------------------------------
52 Annex with a list of manufacturers, who shall carry out their obligations in the framework of the collective system, and demonstrate
consent of the individual producers with a proposal to write
--------------------------------------------------------------------------------------------------------
53 Annex with written credentials based on which you have been designated authorized representatives
--------------------------------------------------------------------------------------------------------
54 Annex with a list of groups and subgroups of Eee, for which implementation will be ensured within the framework of
the collective system
--------------------------------------------------------------------------------------------------------
55 Annex describing how information distributors and final users training postponed
electrical and electronic equipment to designated places outside municipal waste according to § 38 paragraph. 4 (b). and the law)
--------------------------------------------------------------------------------------------------------
56 Annex describing how information on the role of the final user in reusing
electrical equipment and material or other use of elektroodpadů and about the possible harmful effects of
hazardous substances in electrical and electronic equipment on the environment and on human health by
§ 38 paragraph. 4 (b). (b)), and (c)) of the Act
--------------------------------------------------------------------------------------------------------
57 Annex describing how information processors elektroodpadů on technical requirements necessary
to its processing and preparation for reuse under section 37l paragraph. 2 of the Act
--------------------------------------------------------------------------------------------------------
58 Annex with a list of places taking back Eee, the design type of the contract with the operator
Jobs collection
--------------------------------------------------------------------------------------------------------
59 Annex describing the collection network for the separate collection of elektroodpadů, proposal for a type of contract with
the operator places the separate collection of
--------------------------------------------------------------------------------------------------------
60 Annex describing ensure processing removed Eee aodděleně captured
elektroodpadů pursuant to section 37l paragraph. 3 of the law
--------------------------------------------------------------------------------------------------------
The other passed to the annex
--------------------------------------------------------------------------------------------------------
61 standard contract operator of the collective system with the manufacturers
--------------------------------------------------------------------------------------------------------
62 standard contract operator of the collective system with the operators of solar power plants
--------------------------------------------------------------------------------------------------------
63 Full power from the producers of the operators of the system (number):
--------------------------------------------------------------------------------------------------------
64 additional attachments not listed elsewhere in annex No 3 (indicate number):
--------------------------------------------------------------------------------------------------------
The decision (to be completed by the Ministry)
--------------------------------------------------------------------------------------------------------
65 on the date of delivery of the draft to write to the list:
--------------------------------------------------------------------------------------------------------
66 release date a decision on entry in the List:
--------------------------------------------------------------------------------------------------------
Eee producer registration number 67:
--------------------------------------------------------------------------------------------------------
registration number 68 collective system operator:
--------------------------------------------------------------------------------------------------------
The explanatory notes
Act means the Act No. 185/2001 Coll., on waste and amending certain
other laws, as amended.
Attachment no 3 shall apply and the credentials of the representatives of the producers, who their obligations
According to the fourth part of title II, section 8 of the Act in the context of collective
system, not yet an to the list for the Group
the electrical equipment, together with the collective system as
the form for the purposes of the application for entry on the list. Attachment no 3 on
the operator uses the collective system, which was invited
the Ministry in support of the supporting documents showing that the fulfilment of obligations
the producers involved in the collective system is provided. In such a
If the fill out a form, only the data that has changed.
Manufacturer of means also authorized representative pursuant to § 37q law.
The explanatory notes to part I.
Part I to be completed separately for each manufacturer in the framework of the collective
the system. The number of completed parts I must match the number of producers
involved in the collective system and listed in the list of manufacturers of this
the collective system.
Identification data
Row 1-to be completed, where appropriate, the name and surname, name (only for
natural persons) or the trade name of the manufacturer, as it is registered in the commercial
the register.
Row 2-is the legal form of the manufacturer; If it is not listed, fill in the
its name in row 3.
Row 3-fills with a different name, legal form of the manufacturer if he is not listed on the
line 2.
Row 4-fill in the exact and full address of the registered office of the manufacturer-Street, the village,
ZIP/POSTAL CODE.
Row 5-fills the only manufacturer who is a natural person.
Row 6-to be completed by the person's identification number (IČO) and tax
identification number (Tin), if the producers are allocated. If the manufacturer
Less than eight-digit IDENTIFICATION NUMBER, make up the left zero to the total number of 8.
The identification data of the foreign manufacturer
To be completed only in the case that the proposal to write serves authorized representative
According to § 37q, paragraph. 1 or paragraph. 2 of the Act.
In rows 7 through 9, fill in the identification data relating to the
foreign manufacturers under section 37 g (a). (e) section 4 of the Act) or to the person
According to § 37q, paragraph. 2 the first sentence of the law, who's in the Czech Republic
determine the authorised representative.
Row 9-enter the registration, which is a foreign person registered
If it is registered, and the registration number.
The identity and contact details of the statutory body manufacturer
In rows 10-13 shall be filled in the required information related to the
the manufacturer, the authority and the signature of the statutory body. If the manufacturer
natural person, fill in their own details and attach your signature. The signature can
to be replaced by the manufacturer, the operators of the power of collective
the system. A copy of the full powers are in the annex of the proposal (line 63).
A list and description of the electrical equipment
Lists the details of the electrical and electronic equipment, which the manufacturer launches in Czech
Republic.
In lines 14 to 23 shall be completed for each data group
electrical equipment according to annex No. 7 of the Act. In line 17, fill out the information
for solar panels separately under the designation of the Group 4b. To 14. August
2018 apply Group electrical equipment referred to in part I of Annex No. 7
the law. From 15. August 2018, the Group shall apply to the electrical equipment referred to in
Part II of annex 7 to the law (lines 20 to 23 do not apply).
-Subgroup in that group will bring the number of subgroups according to annex No.
1. To 14. August 2018 shall apply the subgroup referred to in part I of the annex No.
1 and 15. August 2018 shall apply the subgroup referred to in part II of the annex
No 1.
The quantity placed on the market in the previous year and in the year of submission of the proposal-
in the column indicating the amount of electrical and electronic equipment, which the manufacturer said on
the market in the Czech Republic in the previous calendar year, and
the amount of electrical and electronic equipment, which the manufacturer on the market in the Czech Republic
in the submission of the proposal to the entry in the list. The data shall be reported in tonnes per
three decimal places and at the same time, enter the quantity in pieces.
Row 24-in the annex, for each of the products (if they are not marked
differently), indicating the manner in which the products will be marked by date
production, the brand for the identification of the manufacturer, the marking for the purposes of reverse
the collection, for example. the attached copy of the used the symbol of the brand.
Explanatory notes to part II.
Part II. This is completed once, together for all manufacturers in the framework of the
the collective system.
Identification data the operator system
In part II. the details of the collective system operator
ensuring compliance with the obligations of manufacturers under the collective system.
Row 25-fills the trade name of the operator of a collective
the system, as it is registered in the commercial register, or his name.
Row 26-fills in the legal form of the operator of a collective system.
Row 27-fills in with the exact and full address of the registered office of the operator
the collective system-Street, city, ZIP/POSTAL CODE.
Line 28-filled person identification number (IČO) tax
identification number (Tin) if the operator of a collective
assigned to the system. If the operator of a collective system of IDENTIFICATION NUMBER less than
eight-handed, make up the left zero to the total number of 8.
Row 29-fills in the required contact information related to the
the operator of a collective system.
The identity and contact details of the statutory authority of the operator
the collective system
In lines 30 to 34 are filled in the required information related to the
the operator, the authority and the signature of the collective system
the statutory authority.
Row 35-to 50-fill out the names of the attachments, always in the line to the required
the requested data. Filling out the name of the attachment may be eg. Annex s
the number of the respective line with which is filled in. Description to 35 lines
up to 50 can be filled into the joint annex with a breakdown according to the requirements
listed on each line.
The method of financing the collection, treatment, recovery and disposal
electrical and electronic equipment put on the market after day 13. August 2005 pursuant to § 37n
paragraph. 1 of the law
The method of financing separate collection, the collection, processing,
recovery and disposal of electronic waste from solar panels under section 37p
paragraph. 1 of law-annex to the proposal writing
Row 35-a description of the way in which it will be followed in the handling of
electrical equipment marketed after day 13. August 2005, including
the confirmation of the commitment to a specific period (e.g. 1 year) to finance e.g..
in the form of:
and contribution to one removed. "and identified by the piece (the product) from
the individual manufacturer. This is analogous to the historical contribution
electrical equipment and will be determined for the producers, who decide to tackle
and electronic waste management of these devices a collective system. To be completed in the
If the collective system producers this service also plans to
provide, and
(b) the operator of a collective commitment system. (eg. a public promise)
Remove electrical and electronic equipment from all manufacturers, who
undertake in a given period to meet its obligations through this
the system.
Row 36-in the case of solar panels placed on the market after 1. January 2013
the determination of the amount of the contribution per kilogram of solar panel on the
ensuring the financing of the management of electronic waste from this Panel after
the end of its life, including detailed supporting documents, from which
the operator of a collective system of calculation was based.
Row 37-a description of how the management of the contribution on the Eee
put on the market after day 13. August 2005-eg. accounting managers
collection sites, svozovým companies, processors.
Row 38-for solar panels placed on the market after 1 January 2007. January 2013
fills as in line 37.
Row 39-tools implementation of the cash management checking
the resources obtained from contributions to the management of electronic equipment
placed on the market after day 13. in August 2005, to avoid the use of
These funds for purposes other than that to which they are intended.
The presentation of the collection of the waste plan and financing of recycling certain
period (1, 3 or 5 years). To be completed in the case of the collective system
plans to provide this service for producers, see the line 35.
Row 40-for solar panels placed on the market after 1 January 2007. January 2013
fills as in line 39, while sampling plan corresponds to the
life of the solar panels.
Financial collateral management with historical electronic equipment (pursuant to section
paragraph 37n. 3 of the law)
Financial security management of electronic waste from solar panels
placed on the market before 1 January 1998. January 2013 (under section 37p (2) of the Act)-
the annex to the proposal for registration
Row 41-description of the determination of the contribution to the historic WEEE
(put on the market until the date of 13 August 2005) by groups and products
the groups, which it intends to provide the collective system, including placing
the amount of the contributions for each of the subgroups.
Row 42-determination of the amount of the contribution per kilogram of solar panel
to ensure the financing of the management of electronic waste from this Panel after
the end of its life, including detailed supporting documents, from which
the operator of a collective system of calculation was based. The account number
established by the Bank, based in the Czech Republic or in a branch office of a foreign
banks in the Czech Republic for the purposes of saving money
obtained from contributions to ensure the financing of
electronic waste from solar panels placed on the market before 1 January 1998. January
2013.
Row 43-a description of how the collective system to manage
funds obtained from the contributions to the historical
electrical equipment-eg. posting to the operators of collection sites, svozovým
companies, processors, General information.
Row 44-for solar panels placed on the market before 1 January 1998. January 2013
fills as in row 43.
Row 45-description of how to control the management of the funds
obtained from the contributions to the historical operator electrical
the collective system so as to prevent the use of these
of funds for purposes other than that to which they are intended. The scope of the
control by the producers involved in the collective system.
Row 46-for solar panels placed on the market before 1 January 1998. January 2013
fills as in line 45.
Row 47-a description of how the collective system meet for the manufacturer
the obligation to ensure the financing of the management of historical
electronic equipment. This section does not apply to solar panels.
The method of financing separate collection, treatment, recovery and disposal
elektroodpadů according to § 37o law-annex to the proposal writing
Row 48-description of the method (methodology) the financing of electronic waste in accordance with §
37o law-the resolution of the EEE placed on the market after day 13.
August 2005 and prior to the day of the 13. in August 2005, the substitution of new products,
that collective system operator shall negotiate with the producers.
Row 49-how will the collective system to manage cash
the resources obtained from contributions to ensure the management of
electronic waste in accordance with § 37o law.
Row 50-description of the control system with the financial
resources to ensure the disposal of electronic waste in accordance with § 37o law
so, to avoid the use of such funds for purposes other than
What are intended.
If a collective bargaining system ensures the financing referred to in § and § 37o 37n
the Bill for all of the electrical equipment in the context of the group, electrical equipment
in accordance with Annex 7 of the Act, regardless of whether they originate from households
or not, and irrespective of the date when it was placed on the electrical equipment
market, showing rows of Annex 41 47 according to. In lines 35 to 40 and 48 to 50
to fill out the required information to the required references to rows 41 to 47.
On line 41 will be listed above the total contribution, which the producers will
cover the collective system.
The explanatory notes to part III.
Part III. This is completed once, together for all manufacturers in the framework of the
the collective system.
How to carry out the duties of the annex of the proposal on the write-
Lines 51 to 60 – fill out the names of the attachments, always in the line to the required
the requested data. Filling out the name of the attachment may be eg. Annex s
the number of the respective line with which is filled in.
Row 53-annex is written on the basis of credentials was designed
authorized representative.
Row 54-the operator of a collective system of lists and groups
subgroups of Eee, for that will ensure the fulfilment of the obligations
producers.
Lines 58 and 59-collective system operator shall submit the list of
contractually secured places or taking back of separate collection, the type
the contract with the competent bodies, the development plan of the collection network and ensure
the respective collection containers, related to the type of electronic waste.
60-line collective system operator submits the Treaty shall
processing devices, a list of processors and a description of the processing
electronic waste in facilities so as to be able to assess the level of
material recovery and reuse. The device must be capable of
handle the type of electronic waste electrical and electronic equipment (to the Group
separately describe, in particular, for specific waste streams, such as
monitors, fluorescent lamps and discharge lamps or cooling equipment).
The other passed to the annex
Line 61-annex to the standard contract, which will be sealed with all the
the producers, who will engage in a collective system, or all
producers in the case of collective system for the funding of the historic
waste.
Line 62-annex to the standard contract, which will be sealed with all the
the operator of solar power plants, who will engage in a collective
the system.
Line 63-in an empty cell at line 63 is the number of full powers from the
producers of the operators of the collective system.
A copy of the full powers and their alphabetical listing by name of manufacturers
they are a separate annex to the proposal.
64-line in the empty cell on line 64 the number of annexes to the proposal,
that are not listed elsewhere in annex.
Lines 65 to 68 do, is used for the records of the Ministry.
Row 67-registration number manufacturer of electrical and electronic equipment (max. 12 characters) will be
has been allocated in the form of: the serial number of the registration in a given calendar year (5
places)/the last two digits of the calendar year-ECZ, where E stands for
Electrical equipment (e.g. 00001/05-ECZ).
Line 68-the registration number of the operator system (max. 12
characters) will be distributed in the form: abbreviation of the system (2 places) to-
collective, KH-financial provision dealing with the historical
electrical and electronic equipment, the serial number of the registration in a given calendar year (3
space)/the last two digits of the calendar year of the decision (2 seats)-
ECZ, where E stands for electrical equipment (eg. KH001/05-ECZ).
When inserting data into the list of the producers referred to in § 37i paragraph. 4 of the law
the operator shall assign a collective system producers registration number
the manufacturer of the electrical equipment (max. 12 characters) in the form: the serial number of the registration
(5 seats)/the last two digits of the calendar year-ECZ, where E stands for
Electrical equipment (e.g. 00001/05-ECZ).
Annex 4
The annual report on the implementation of the obligations of the collected WEEE and
separate collection of elektroodpadů
Reporting year. ...
---------------
Total number of sheets
---------------
Sheet No.
---------------
--------------------------------------------------------------------------------------------------------
The manufacturer of the electrical equipment/operator system
--------------------------------------------------------------------------------------------------------
The registration number of the manufacturer of the a-list:
--------------------------------------------------------------------------------------------------------
The registration number of the operator system-List:
--------------------------------------------------------------------------------------------------------
COMPANY REGISTRATION NUMBER:
--------------------------------------------------------------------------------------------------------
The manufacturer of the electrical equipment/operator Records filled in by:
the collective system:
First Name: Last Name:
Street: no: no or.: Phone: E-mail:
Date of preparation:
Municipality: Signature:
ZIP/POSTAL CODE:
IČZÚJ:
--------------------------------------------------------------------------------------------------------
---------
Table 1 data sheet No.
---------
Products placed on the market in the Czech Republic for the reported year
--------------------------------------------------------------------------------------------------------
The Group's own production Imports Exports put on the market in the Czech Republic
--------------------------------------------------------------------------------------------------------
[t] PC [t] PC [t] PC [t] PC
--------------------------------------------------------------------------------------------------------
1 2 3 4 5 6 7 8
--------------------------------------------------------------------------------------------------------
1.
--------------------------------------------------------------------------------------------------------
2.
--------------------------------------------------------------------------------------------------------
3.
--------------------------------------------------------------------------------------------------------
4A.
--------------------------------------------------------------------------------------------------------
4B.
--------------------------------------------------------------------------------------------------------
5.
--------------------------------------------------------------------------------------------------------
5a.
--------------------------------------------------------------------------------------------------------
6.
--------------------------------------------------------------------------------------------------------
7.
--------------------------------------------------------------------------------------------------------
8.
--------------------------------------------------------------------------------------------------------
9.
--------------------------------------------------------------------------------------------------------
10.
--------------------------------------------------------------------------------------------------------
Table 2---------------
Sheet No.
---------------
Total number of sheets
---------------
Ways of dealing with the waste electrical and electronic equipment
--------------------------------------------------------------------------------------------------------
A group of electrical equipment in accordance with Annex 7 of the law
--------------------------------------------------------------------------------------------------------
The amount of WEEE, the preparation for which the Group tons of pieces
the take-back obligation applies or of separate collection
--------------------------------------------------------------------------------------------------------
The amount of recovered electrical equipment:
--------------------------------------------------------------------------------------------------------
of which:-collection courts
--------------------------------------------------------------------------------------------------------
-the recent sellers
--------------------------------------------------------------------------------------------------------
-Another way of taking back
--------------------------------------------------------------------------------------------------------
Elektroodpadů total amount of collected separately:
--------------------------------------------------------------------------------------------------------
of which:-collection courts
--------------------------------------------------------------------------------------------------------
-the recent sellers
--------------------------------------------------------------------------------------------------------
-end users
--------------------------------------------------------------------------------------------------------
-Another way of separate collection
--------------------------------------------------------------------------------------------------------
Management of electronic equipment:
--------------------------------------------------------------------------------------------------------
-reuse (N8)
--------------------------------------------------------------------------------------------------------
The treatment of electronic waste management:
--------------------------------------------------------------------------------------------------------
-material utilization (R2, R3, R4, R5, R6, R7, R8, R9, R11, N10)
--------------------------------------------------------------------------------------------------------
-energy recovery (R1)
--------------------------------------------------------------------------------------------------------
-Delete (D1, D5, D12)
--------------------------------------------------------------------------------------------------------
-removal of the incineration (D10)
--------------------------------------------------------------------------------------------------------
-Another way of loading (N1, N11, N12)
--------------------------------------------------------------------------------------------------------
-the amount of waste transferred from last year-conversion of
warehouse 31. December of the previous year (COO)
--------------------------------------------------------------------------------------------------------
-warehouse balance at 31. December reporting year
(N5, R13, D15)
--------------------------------------------------------------------------------------------------------
-export to the countries of the European Union (N7)
--------------------------------------------------------------------------------------------------------
-export outside European Union countries (N17)
--------------------------------------------------------------------------------------------------------
Table No 3---------------
Sheet No.
---------------
Total number of sheets
---------------
Information about the ways of dealing with electronic waste management
--------------------------------------------------------------------------------------------------------
COMPANY REGISTRATION NUMBER:
--------------------------------------------------------------------------------------------------------
Acquisition cost. A group of electrical and electronic equipment:
the number of the
Catalogue Category Name Code Of The Total Partner
the number of waste waste waste way quantity of IDN, IČZ, name, address,
waste [t], and IČZÚJ establishment
--------------------------------------------------------------------------------------------------------
1 2 3 4 5 6 7
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
Table 4---------------
Sheet No.
---------------
The fulfilment of obligations pursuant to § 37 m, paragraph. 3 of the law
--------------------------------------------------------------------------------------------------------
Group total amount of recovered Material Again Utilization
electrical equipment and separate usage
the captured elektroodpadů
--------------------------------------------------------------------------------------------------------
[t] % t % t % t
--------------------------------------------------------------------------------------------------------
1.
--------------------------------------------------------------------------------------------------------
2.
--------------------------------------------------------------------------------------------------------
3.
--------------------------------------------------------------------------------------------------------
4A.
--------------------------------------------------------------------------------------------------------
4B.
--------------------------------------------------------------------------------------------------------
5.
--------------------------------------------------------------------------------------------------------
5a.
--------------------------------------------------------------------------------------------------------
6.
--------------------------------------------------------------------------------------------------------
7.
--------------------------------------------------------------------------------------------------------
8.
--------------------------------------------------------------------------------------------------------
9.
--------------------------------------------------------------------------------------------------------
10.
--------------------------------------------------------------------------------------------------------
Table 5---------------
Sheet No.
---------------
Overview of separate annexes to the annual report
--------------------------------------------------------------------------------------------------------
An overview of the required annexes annex Designations
--------------------------------------------------------------------------------------------------------
1 2
--------------------------------------------------------------------------------------------------------
1 affidavit, that for any changes to the data referred to
in writing to the list of
--------------------------------------------------------------------------------------------------------
2 the annex describing the changes that have occurred
--------------------------------------------------------------------------------------------------------
3 the annex specifying the management of funds raised
as a contribution referred to in section paragraph 37n. 3 of the law and the determination of the amount of the
This post in the following year
--------------------------------------------------------------------------------------------------------
4 proof of guarantees according to § 37n paragraph. 2 of the Act for the individual
system, including the statement of purpose of the bank account
If it is based
--------------------------------------------------------------------------------------------------------
5 the annex describing the nature and frequency of checks the functionality of the
the entire system
--------------------------------------------------------------------------------------------------------
6 a list of the producers, for which the annual report is submitted
--------------------------------------------------------------------------------------------------------
7 list of solar power plants, for which the
the operator of a collective system ensures the implementation of the
obligations under section 37p paragraph. 2 of the Act
--------------------------------------------------------------------------------------------------------
8 other attachments
--------------------------------------------------------------------------------------------------------
A separate annex to the annual report
List of solar power plants, for which the operator of a collective system ensures the implementation of the
obligations under section 37p paragraph. 2 of the Act
--------------------------------------------------------------------------------------------------------------------------------
1 2 3 4 5 6 7 8 9 10
--------------------------------------------------------------------------------------------------------------------------------
Name and last name, IDENTIFICATION NUMBER address Number M/Wp Mzo Mzpr Above posts above
the name or business operator license selected in the incurred
the company operator of the solar calendar year cash
solar power plants from a given operator resources
solar power plants
--------------------------------------------------------------------------------------------------------------------------------
t t t $ Wp Czk
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------
The explanatory notes
Act means the Act No. 185/2001 Coll., on waste and amending certain
other laws, as amended.
In the "sheet No." shall indicate the order of a sheet from the total
the number of sheets.
The manufacturer also authorised representative pursuant to § 37q law.
Explanatory notes to table Manufacturer electrical equipment/operator
the collective system
Total number of sheets-enter the number of all the leaves, that the annual report
includes, IE. the total of all sheets filled to individual tables.
This number should be the same number appearing on the last worksheet
filled in table 5.
The registration number of the manufacturer-List-enter the number assigned to the
the Ministry (of the form as specified in annex No. 2) on the basis of the decision of the
write to the list for the individual and solidarity systems. Does not in
the case of the fulfilment of obligations by the operator of a collective
System; in that case, this line is replaced with a list of manufacturers, who
they are involved in the system.
The registration number of the operator system-List-enter
number assigned by the Ministry (in the form specified in annex No. 3) on the basis of the
the decision to write to the list for the collective systems.
IDN-fills with the identification number of the manufacturer or the operator
the collective system; If the manufacturer or operator of the collective
System IDENTIFICATION NUMBER less than eight-handed, make up the total number of zeros on the left
8. The manufacturer of the electrical equipment/system operator-
fills the trade name manufacturer electrical equipment/operator
the collective system, as it is registered in the commercial register,
where appropriate, the name of the collective system.
Street, city, ZIP/POSTAL CODE-complete accurate and full address of the registered office of the manufacturer
electrical equipment/operator of a collective system.
IČZÚJ-fills with the identification number of the basic territorial units of the municipality,
in which the headquarters of the manufacturer of the electrical equipment/operator
the collective system. It is reported by the single box of the municipalities of the CZECH REPUBLIC
issued by the Czech Statistical Office.
The register shall be filled-name, where applicable, the name and surname and
contact information for the person who is responsible for the accuracy of the completed
the annual reports.
Copy of report date-date the copies of the reports in the format
DD. MM. YYYY.
Signature to the form, you can insert an electronic signature
Warning:
In the case of sending annual reports for the solidarity system table
The manufacturer of the electrical equipment/operator system lists
all the data related to the manufacturers, which is entrusted with the
drawing up and sending annual reports for the solidarity system.
In the case of sending annual reports for the collective system table
The manufacturer of the electrical equipment/operator system lists
all the data related to the operators of the collective system.
List of manufacturers of Eee, for which the annual report is sent,
listed in table 5 on line 6.
Explanatory notes to table 1
In columns 1 to 8 shall be completed for each data group
electrical equipment according to annex 7, part I of the Act (lines 1 and 10)
in the calendar year 2018 (including) and annex 7, part II of the Act
(only lines 1 to 6) for the following calendar years.
In line 4a shall be information on electrical and electronic equipment belonging to the Group 4
In addition to the solar panels. In line 4b shall indicate separately the information for
the solar panels.
In line 5, the calendar year 2018 (including) of Eee
belonging to the Group 5 in addition to the lamps and fluorescent lamps, which shall be
separately in the line 5a. Summary information for the entire group of 5 are excluded.
Starting from the calendar year 2019 the line 5a does not fill.
The values quoted in the table correspond to the following equation:
Own production + imports-exports = put on the market in the Czech Republic
Data on quantities of electrical and electronic equipment shall be calculated from such documents, which
You can control authority for the manufacturer to demonstrate at the site.
The mass shall be expressed in tonnes to three decimal places and quantity in pieces.
In the event that the annual report serves a collective system operator,
It is reported the total figures for all manufacturers participating in this
the collective system.
Own production-indicate the total quantity of the products manufactured by
the individual groups in tonnes and, if possible, even in pieces.
Imports-State the quantity in tonnes and, if possible, even in the
units placed on the market from the EU countries and imported into the Czech Republic from the other
States.
Exports-State the quantity in tonnes of the product, if it is possible, even in and
pieces from own production placed on the market in other countries than in the Czech Republic.
Explanatory notes to table No 2
To be completed for each group of the electrical equipment referred to in table 1
This annex separately. For methods of dealing with electronic waste management are
ways to waste codes according to table 2 of Annex 8 of this
the Decree.
In the box on the right next to the name of the table (a group of electrical and electronic equipment according to the
Annex No. 7 of the law) make up to the number of groups for which the table is
filled in. The number of filled tables, no 2 and no 3 must be the same.
The quantities of Eee, which is covered by group preparation
the obligation to return or separate collection-enter the details in the
tonnes and, if possible, even in pieces from the No. 1 in columns 7 and 8
always the preparation group of electrical and electronic equipment.
The amount of recovered electrical equipment total-this is the
electrical equipment coming from households. Lists the total quantity of
backward taken of EEE in the group, for which the table is no.
2 filled in, tons, and if it is possible, even in pieces. The total quantity of
further be broken down by more detailed breakdown of the places where it was
Eee retroactively removed.
The amount of collected separately elektroodpadů total-this is the
non-electrical equipment from private households. Lists the total quantity of
the captured elektroodpadů group of electrical equipment, for which the table is
No. 2 filled in, tons, and if it is possible, even in pieces. Total
the quantity is also be broken down by more detailed breakdown of the place where the
e-scrap picked up separately.
Way to waste electrical and electronic equipment-lists the total quantity of
in tonnes of electrical equipment, and if it is possible, even in pieces, which was
reused.
The treatment of electronic waste management-provides the total amount of
elektroodpadů in tonnes and, if possible, even in pieces, with which it was
usage specified ways.
Notes:
-For exports to the countries of the European Union, lists the total quantity exported
elektroodpadů, regardless of the method of loading, i.e.. reuse,
recovery or disposal.
-The quantities of Eee and recovered separately
the captured elektroodpadů and dealing with them is take from the evidence on
the basis of which the rated performance of the contractual relationships (for example,
supporting documents for billing), and that you can control authority for the manufacturer
documented on the site.
-Provide other ways of taking back Eee and/or separate
collection elektroodpadů, if they are not taken in places in the table
referred to.
-The weight is expressed in tonnes to three decimal places and the amount in the
pieces.
-In the "sheet No." shall indicate the order of a sheet from the total
the number of sheets of the annual report.
-In box "number of sheets table 2" shall be the total number of sheets
completed only to the table no. 2.
Explanatory notes to table No 3
Table 3 shall be completed for each group of the electrical equipment referred to in
table 1 of this annex separately.
The number of filled tables, no 2 and no 3 must be the same.
IDN-fills the identification number of the manufacturer of the electrical equipment/
the operator of a collective system, which sends the message to the corresponding
data referred to by the manufacturer of the electrical equipment/operator of collective
the system on the first page; If upon less than eight-digit IDENTIFICATION NUMBER,
make up to the left of zero to the total number of 8.
A group of electrical and electronic equipment-fills with a number and the name of the Group
electrical equipment according to annex No. 7 of the Act and the corresponding group, for
which is filled in the table no. 2.
In column 1 is the serial number of the kind of waste.
2-column lists the catalog number of the waste in accordance with Decree No.
381/2001 Coll. (Waste Catalogue). The catalogue number is not used in the case of
the reuse of EEE.
3-column lists the categories of waste referred to in Decree No. 381/2001
Coll. (Waste Catalogue). The category is not used in the event of
the use of electrical equipment.
In column 4 is the name of the waste according to Decree No. 381/2001 Coll.
(Waste Catalogue). The name of the waste is not used in the event of
the use of electrical equipment.
In column 5 shows the treatment codes according to the table of waste management
(table 2 of the annex No. 8 of this Ordinance) by actually carried out
individual ways of waste management partner referred to in column
7.
In column 6 is the total quantity of each waste for each
catalogue number of the waste according to the various types of waste listed
in column 5 and the partners listed in the column no. 7, which was a waste
passed. The quantity is expressed in tonnes to three decimal places.
In column 7-partner means a natural person authorized to do business
or legal person (including foreign persons), which was used
the product or its part passed to reuse, or authorized
the person that the waste was passed to the next loading. Lists the IDENTIFICATION NUMBER
partner, if it was granted, and the name, address, and IČZÚJ establishment
partner. When the delivery of the waste, where the partner is the operator of equipment
According to § 14 paragraph. 1 or 2 of the Act, States and the identification number of the device
(IČZ) allocated to the regional authority. In the case of import, export, or
the cross-border shipment of waste, the code of the State according to ČSN ISO 3166-
Codes for names of countries, section 1, 2 and the name of the State of import, export, or
cross-border transport.
Notes:
-Bilančně is the sum of all quantities indicated in column 6, passed
all partners for one way of dealing, shall be equal to the amount of
the same way the waste referred to in table 2.
-The weight is expressed in tonnes to three decimal places and the amount in the
pieces.
-In the "sheet No." shall indicate the order of a sheet from the total
the number of sheets of the annual report.
-In box "number of sheets table No 3" shall be the total number of sheets
completed only to the table No 3.
Explanatory notes to table 4
In the "sheet No." they are filling out the worksheet shows the order of the total
the number of sheets of the annual report. The manufacturer of the electrical equipment or operator
the collective system, separately calculated data on compliance with the
obligations pursuant to § 37 m, paragraph. 3 of the Act. The percentage data are
calculated for each of the ways of processing in relation to the total
the amount of WEEE recovered and collected separately
elektroodpadů in a given year.
Column Group-numbers denote the Group of electrical equipment according to annex No.
7 of the Act. To be filled in the same manner as in table 1.
The total amount of arrears collected WEEE collected separately and
elektroodpadů is the sum of the values of the fields "quantity of backward
collected WEEE "and the" Total Quantity collected separately
a total of elektroodpadů "from table no. 2, for each group of
electrical and electronic equipment separately.
Use-it is reported as a percentage value, calculated as a percentage of the amount
electronic waste processed by individual ways of loading of the table.
2: material recovery, energy recovery, and possibly another way to
waste, falling between the ways of use of waste according to annex No 3
law, and the total amount of arrears collected WEEE and
separately collected elektroodpadů.
Reuse-indicates the value is calculated as the percentage share of
the amount of WEEE for reuse and passed by the total
the amount of WEEE recovered and collected separately
elektroodpadů.
Material usage is calculated as a percentage
the amount of electronic waste processed various ways
waste management table 2: material use and, where appropriate, another way
waste, falling between the ways of use of waste according to annex No 3
law and appropriate to the nature of material recovery, and total
the amount of WEEE recovered and collected separately
elektroodpadů.
Explanatory notes to table 5
In the "sheet No." shall indicate the order of a sheet from the total
the number of sheets of the annual report. This is the last sheet of the annex No 4
the Decree, which shall be indicated in the box "total number of sheets" on worksheet 1.
In column 1 are listed a separate annex to the annual report.
In column 2, in each row fills in the description or name of each
processed annex, for example, "Appendix 1" or its name.
Other Annex is annex, that are, for example, the commentary to the
the annual report.
The explanatory notes to annex-list of solar power plants, for the
that the operator of a collective system ensures fulfilment of obligations
pursuant to section 37p paragraph. 2 of the Act
The attachment operator only fills in the collective system, which
ensure fulfilment of the obligations of the operator of solar power plants under section
37p paragraph. 2 of the Act.
In the event that one operator carries more than one solar
the power plant, the data for each of the solar power plant, especially on
a separate row of the table.
In column 5 shall bear the number of the licence for the production of electricity operator
solar power plants.
In column 6, the weight and the installed capacity of all solar
panels placed on the market before 1 January 1998. January 2013 in the solar power plant.
In column 7, enter the weight of the electronic waste from solar panels
placed on the market before 1 January 1998. January 2013, which was retroactively removed or
separately captured in the calendar year of the solar power plant.
In column 8 shall bear the weight of the electronic waste from solar panels
placed on the market before 1 January 1998. January 2013, which was processed in the
the calendar year of the solar power plant.
In column 9, indicating the amount of the contributions selected in that calendar year
from the operator of solar power, which falls on the solar
the power plant.
In column 10 shall indicate the amount of funds spent in that
calendar year on the fulfilment of the obligations under section 37p paragraph. 2 of the Act in
under the collective system, which falls on the solar power plant.
Warning for sending annual reports:
The annual report on the implementation of the obligations of the collected WEEE and
separate collection of elektroodpadů under this annex shall be sent in the
electronic form through an integrated system of performance
reporting obligations in the field of the environment according to law No.
25/2008 Coll., on integrated pollution registry and
implementation of the integrated system of reporting obligations in the field of
environment and amending certain laws.
Annex 5
cancelled
Annex 6
Designs of graphic symbols for the marking of electrical and electronic equipment for the purpose of
the take-back and separate collection of elektroodpadů
Model No. 1
Marking of electrical and electronic equipment put on the market after day 13. August 2005 pursuant to section
37j paragraph. 2 of the Act
The dimensions defined in the STANDARD EN 50419
Pattern No. 2
Designation for the purpose of taking back Eee, EEE and
separate collection of elektroodpadů pursuant to section 37k paragraph. 2 of the Act
The dimensions defined in the STANDARD EN 61429 and its change of the Z1.
Annex 7
1.
The technical requirements for storage and treatment elektroodpadů
Warehouses and equipment for processing elektroodpadů are operated in
accordance with the specific legislation ^ 7) and meet the following
minimum technical requirements:
1.1 instead of to the collection or storage of elektroodpadů is equipped with:
-a paved the floor impervious to leakage of hazardous substances
equipment for collecting the releases of hazardous substances, if you are in the
electronic waste,
-equipment for cleaning substances for the absorption of the uniklých operating
liquids, equipment for the removal of uniklých liquids, if they are in
electronic waste, muster resources for emerging
wastes and, where appropriate, other devices to modify the waste,
-a device allowing movement of elektroodpadů.
1.2 Place to handle elektroodpadů is equipped with:
-a suitable device to determine the weight of the processed
electronic waste,
-a paved the floor impervious to leakage of hazardous substances
equipment for collecting the releases of hazardous substances, if you are in the
electronic waste,
-appropriate containers for storage of batteries, accumulators, for
capacitors containing PCBs or PCTS and other hazardous wastes, such as.
radioactive waste, ^ 8)
-appropriate storage for disassembled parts and
components,
-equipment for the treatment of wastewater in accordance with specific legal
legislation. ^ 10)
2.
Technical requirements for processing elektroodpadů
2.1. Include cut and removed parts of the elektroodpadů under the individual
the numbers according to table 1 of the annex No. 8 and categorize them according to individual
of the species.
2.2. Only use technology designed for the processing of electronic waste
ensure that there is no leakage of substances affecting the environment.
2.3. Electronic equipment containing controlled substances ^ 10) (CFCs and HCFCS) or
fluorinated greenhouse gases ^ 10a) (HFC) and electronic waste management from the device,
It was used in the manufacture of controlled substances, or fluorinated
greenhouse gas, or whose continuing function was on regulated
substances or on fluorinated greenhouse gases, process-dependent
in accordance with the procedures laid down for cooling device specific legal
^ Regulation 11).
2.4. From elektroodpadů preferably removed:
and capacitors containing PCBs),
(b)) components containing mercury, such as. switches, or
fluorescent lamps on display, podsvěcování
(c)) batteries and accumulators,
d) printed from mobile phones in General, or from other devices,
If the surface of the printed circuits greater than 10 square centimetres,
(e)), toner cartridges ink cartridges for liquid and Pasty
fillings, as well as colour toner,
(f)) containing brominated fire retardants in plastics,
(g) the asbestos waste and components) components which contain asbestos,
h) screen,
I) controlled substances and parts, components and materials containing
chlorofluorocarbons (CFCs), partially halogenated
hydrochlorofluorocarbons (HCFCS) and partially halogenated
fluorderiváty hydrocarbons (HFC), hydrocarbons (HC),
(j)) ammonia solution and water for absorption cooling equipment,
for all other liquids), in particular oil and corrosive, ^ 12)
l) lamps, fluorescent lamps,
m) liquid crystal displays about the area more than 100 cm2 (if possible
together with the sleeve) and all of the display back-lit lamps,
n) external electric cables,
components containing refractory on) ceramic fibres,
p) components containing radioactive substances, which also disposes of the
under special legislation, ^ 8)
q the electrolytic capacitors) with a height of 25 mm and a diameter of 25 mm
or a comparable volume.
2.5. parts, components and materials, preferably removed from elektroodpadů
According to section 2.4. use or delete in accordance with specific legal
regulations governing the ^ 12) hazardous substances in them
contained. That section, materials and components to remove or use in
accordance with the Act or special legislation. ^ 13)
2.6. The established ways of processing the selected elektroodpadů:
and the delete layer from the screens), luminoforů, and getrové plates
Electron source
(b)) of electronic waste that contains a controlled substance, as defined by law No.
86/2002 Coll. (Act on the protection of the atmosphere), which deplete the ozone layer
or have a global warming potential (GWP) above 15, if the
includes foam and cooling circuits properly sucked out gases and properly processed. With
the ozone layer gases injurious to dispose of in accordance with a special
law, ^ 11)
(c) in the case of structural components) containing mercury to perform appropriate measures to
prevent mercury emissions.
3.
The rules of operation of the device to collect elektroodpadů and warehouse elektroodpadů
contains:
3.1. basic data on the device, and store: the name of the device identification
the data of the owner, operator and device identification data warehouse
including data on statutory representatives and telephone connection to them,
the names of the executives of the equipment, an important telephone numbers (fire brigade,
public health authorities, medical emergency service, police,
etc.), data on the premises of the competent authorities of the public administration (Czech
inspection of environment, regional office, etc.).
3.2. Overview of the types of waste, for which the device is intended (according to the classification
The catalogue of waste and hazardous waste list) ^ 5) purpose for which it is
the device is intended.
3.3. A brief description of the technical and technological equipment,
warehouse (storage resources, handling devices, method of protection
the rock in places of waste disposal, equipment designed for
acceptance of waste (weight, laboratory, etc.).
2.1. Description of the technology and the procedure in the manual or in the warehouse
all technological operations in the equipment, the procedure for the acceptance of waste,
for example. How to control the quality of the waste, the obligations of the operator (for example, to find out
the mass of the waste, perform a Visual inspection, to expose the appropriate
documents, method and procedure of registration into the production of the journal), a description of the next
waste management (eg. the marking of waste, packaging waste,
placing the waste in the device).
3.5. the method of monitoring the operation of the plant and warehouse-selection of indicators
the anticipated environmental effects of the operation on the surrounding area and the method and frequency of
their tracking and documentation (e.g. energy consumption, consumption
water, the measurement of noise emissions, monitoring the quantity and quality of the emissions into the
the atmosphere in accordance with special regulations, monitoring the quantity and quality of
wastewater, groundwater and surface water in accordance with the Special
rules).
3.6. Business ensure the operation of the equipment, warehouse.
3.7. the method of keeping waste entering the equipment, warehouse and
the waste produced in the facility, emerging.
2.4. Measures to limit the negative effects of the device on the environment
and the measures in case of an accident.
2.4. Description ensure safety and environmental protection
and the health of the people.
4.
The operating journal devices to collect elektroodpadů or warehouse
elektroodpadů contains at least:
and) name and surname of the officer responsible for the management of the individual
records and for the operation of the installation or storage,
(b)) all the facts, characteristic for the operation of the device selected
information on the monitoring of the operation of the equipment. the consumption of energy, water,
the quantity of waste received,
(c) monitoring data of the test) and permanent operation of the device,
d) records of staff training, examinations, etc.,
(e) the procedure for notification of non-acceptance) of the waste to the facilities of the authority of the region,
(f) the provisions on the retention of documents) holder received quality
waste for a period of 5 years.
5. The rules of operation of equipment for processing elektroodpadů:
The running order of the equipment for processing elektroodpadů contains in addition to the data
referred to in point 3:
5.1. A detailed qualitative characteristics of the waste to allow their
admission to the facility.
5.2. the raw materials used in the device (outside of accepted waste).
5.3. Materials (or energy) obtained in the establishment of the waste
and their quantity in relation to accepted waste (e.g. kW/t of waste).
5.4. Energy performance equipment weight unit equivalent
accepted waste.
3.4. wastes, waste water and emissions to air of equipment and
their real properties, including a description of the way of their proceeding.
5.6. the percentage by weight of waste, of equipment, including rising
the mass flow of emissions into the air and the volume of waste water discharged
in relation to the weight of incoming waste.
Annex 8
Information about treatment, recovery and disposal of elektroodpadů and
the production and management of waste
Reporting year: ...
Information intended for ODA/SOP (code name):
Datasheet No 1-identification of authorized person
-----------------
The party of no.
-----------------
The total number of Parties reporting
-----------------
----------------------------------------------------------------------------------------------------------------------------
Person a separate establishment
----------------------------------------------------------------------------------------------------------------------------
ID: identification number of the device (IČZ):
----------------------------------------------------------------------------------------------------------------------------
Business name/name/name and surname: Name:
----------------------------------------------------------------------------------------------------------------------------
Street: no: no or: Street: no: no or:
----------------------------------------------------------------------------------------------------------------------------
Obec: Obec:
----------------------------------------------------------------------------------------------------------------------------
PSČ: PSČ:
----------------------------------------------------------------------------------------------------------------------------
ODA (SOP) Code: The Code Of The ODA (SOP):
----------------------------------------------------------------------------------------------------------------------------
IČZÚJ: IČZÚJ:
----------------------------------------------------------------------------------------------------------------------------
The total number of establishments authorised persons: Information filled out: name: last name:
Date of preparation: Phone. Email
----------------------------------------------------------------------------------------------------------------------------
Signature: Note:
----------------------------------------------------------------------------------------------------------------------------
SHEET No. 2-reporting on the processing, use and disposal of elektroodpadů včetněhlášení on the production and management of waste
for the reported year
COMPANY REGISTRATION NUMBER IČZ number worksheet # 2
IČZÚJ establishment number of pages worksheet # 2
----------------------------------------------------------------------------------------------------------------------------
Serial number Classification indication of quantity of waste waste (tonnes) the code of the Partner Note.
Catalog Category name for the group in total, according to the way of IDENTIFICATION NUMBER, IČZ,
the number of the waste type (+) column 8 waste name, address
waste waste (-) and IČZÚJ
the establishment
----------------------------------------------------------------------------------------------------------------------------
1 2 3 4 5 6 7 8 9 10
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------
Explanatory notes:
Act means the Act No. 185/2001 Coll., on waste and amending certain
other laws, as amended.
The operator of equipment for the processing, use and disposal of
elektroodpadů in this annex shall be completed at the same time, production and management
all waste and already does not fill the attachment no. 20 of Decree No 383/2001 Sb.
All the information about the quantity shall be expressed in tonnes to three decimal places.
COMPANY REGISTRATION NUMBER-the identification number of the operator fills in a device to
processing elektroodpadů; If it is less than eight-digit IDENTIFICATION NUMBER, make up
left zero to the total number of 8.
IČZÚJ-fills with the identification number of the basic territorial units of the municipality,
in the borough, the operator has the equipment for processing
elektroodpadů or in the borough is the establishment
the operator of equipment for processing electronic waste. The number of States
According to the single box of the municipalities of the CZECH REPUBLIC issued by the Czech Statistical Office.
ODA (SOP) code is the code of the administrative area with extended
scope or the territory in which it is exercised, transferred the competence
the urban part of the hl. m. Prahy, where the operator has the equipment to
processing of elektroodpadů registered office or on whose administrative territory the
a separate place of business of the operator of equipment for processing
electronic waste is operated, according to the lists issued by the administrative circuits
The Czech Statistical Office.
The identification number of the device (IČZ)-to be filled in the identification number
the equipment allocated to the regional authority (according to § 14 paragraph 1 or 2
law, including equipment, for which the consent to the operation of the replaced
the integrated permit pursuant to Act No. 76/2002 Coll. on integrated
pollution prevention and control, the integrated pollution registry and
on the change of certain acts (the Act on integrated prevention), as amended by
amended).
The worksheet No 1-identification of authorized person
Person-fills the trade name of the person authorized to
operation of the device to the waste facility, as it is registered in the
the commercial register, or its name. In the case of doing business
natural persons, unincorporated business register is filled in her name,
where appropriate, the name, and last name. In addition, fills the full address of the headquarters
authorized person.
The total number of establishments, the persons concerned-shows the total number of
separate establishments, which the person entitled to the territory of the CZECH REPUBLIC. This
the number is identical with the number of submitted reports on the production and management of
facility in the reporting year.
Copy of report date-date the copies of the reports in the format
DD. MM. RR.
A separate place of business-means an establishment under section 17, paragraph. 1
the Trade Licensing Act. The establishment must be in addition to the indications required under
trade law marked also the identification number of the device, to the
which can be connected to the name of the establishment, or other distinguished
the designation. In addition, fills the full address of a separate establishment.
Signature to the form, you can insert an electronic signature pursuant to Act No.
227/2000 Coll., on electronic signature, in wording of later regulations.
To sheet No. 2-report on the collection, treatment, recovery and disposal
elektroodpadů, including information on the production and waste management
reporting year
Column 1 is the serial number (code) waste
2-column lists the catalog number of the waste pursuant to Decree No. 381/2001
Coll. (Waste Catalogue).
3-column lists the categories of waste referred to in Decree No. 381/2001 Coll.
(Waste Catalogue).
Column 4-name type of waste in accordance with Decree No. 381/2001 Coll.
(Waste Catalogue). In the case of waste ending on the two "99 (wastes not otherwise
unspecified) "shall indicate a closer description of the waste (e.g. technical or
commonly used name).
Column 5-in the calendar year 2018 (including) designation
a group of electrical equipment according to table 1, in which the processed
electrical equipment belongs or of which was kind of a waste processing
obtained. From the calendar of the year 2019 States electronic equipment groups numbers
According to annex 7, part II of the Act. This column is filled in only in the
the case of the reception and processing of the elektroodpadů.
Column 6-to each type of waste (waste catalogue number) is to be
information on the total quantity of production or receipt, or the balance of the waste in the
warehouse specify in column 6 on a separate line. On a separate line
always total amount:
and one type of waste produced), the operator of the device, with
A00 code in column 8. For the produced waste and waste
the resulting modification or revision of the waste was removed, if different
kind of a waste than was the original,
(b)) removed the waste of one species, which was collected from one
the originator or the beneficiary, with code B00 in column 8,
(c)), one type of waste, which was transferred from the warehouse from the previous
year, with the code in column 8, Coo
(d)) taken taken a backward or backward
collected WEEE from legal persons or natural persons
authorized to do business, which provides take-back pursuant to § 37k or §
38 of the Act, or the receipt of the waste by natural persons-nepodnikajících
citizens with code BN30 in column 8,
e) imported or transported the waste from the EU Member State with the code BN6
or BN16 in column 8.
Column 7-indicate the total amount of one kind of waste in
individual ways of dealing according to table 2, the corresponding method
the waste referred to in column 8, and for the management of the
the special line.
The sum of all the total quantities referred to in column 6 must equal
the sum of all the quantities according to the various types of waste, including
the balance on the warehouse to 31. December of the reference year, as referred to in
column 7.
Column 8-shows loading codes from table no. 2 actually
carried out by the individual ways of waste management with a number of
set out in column 7.
Partner-the summary descriptions for the originator or by an authorized person and their
nonentrepreneurial natural person or premises from which waste or
backward taken product taken up by an authorized person, or by an authorized
person and her place of business, that was a waste product in the removed or backward
passed to the next recovery or disposal.
Column 9-fill out the required information on the establishment of the partner. In
the case of the receipt of the waste, or backward taken from nonentrepreneurial
natural persons shall bear the name of IČZÚJ and the municipality in which the waste was
produced or reverse the removed product shall be surrendered. In the case of transmission
waste disposal for further use or delete, or
receipt of the waste by the authorised person shall indicate the IDENTIFICATION NUMBER of the authorised person, if
It was assigned to, and the name, address and any establishment authorized to IČZÚJ
of the person. When the transmission or receipt of the waste, where the partner is an operator
the device referred to in section 14, paragraph. 1 or 2 or section 33b, paragraph. 1 of the Act, States
and the identification number of the device (IČZ) allocated to the regional authority. Does not
with the shipping agent. In the case of import, export, or cross-border transport
waste code of the State according to ČSN ISO 3166 codes for names of countries, section
1, 2, and the name of the State of import or export.
Column 10-in case of need it is possible to insert a note.
Table 1-the Group of electrical and electronic equipment
--------------------------------------------------------------------------------------------------------
The number designation of the name of the Group
Group group
--------------------------------------------------------------------------------------------------------
1. In a large home appliances
2. Small household appliances
3. T Equipment of information technology and telecommunications equipment
4A. With Consumer devices
4B. P solar panel
5. Lighting equipment
5a. Of discharge lamps and fluorescent lamps
6. Electrical and electronic tools (with the exception of velkýchstacionárních
industrial tools)
7. Toys, leisure and sports
8. L medical devices (with the exception of all implanted and infected products)
9. monitoring and control instruments
10. (D) dispensers
--------------------------------------------------------------------------------------------------------
* Table 1 applies to calendar year 2018 (including). From the calendar of the year 2019 for the purposes of marking
groups of electrical equipment apply number groups referred to in annex 7, part II of the Act.
Table 2-waste management
--------------------------------------------------------------------------------------------------------
The origin of the waste Quantity Code Partner
waste +/-
--------------------------------------------------------------------------------------------------------
Waste production (own produced waste) A00 (+)
--------------------------------------------------------------------------------------------------------
Waste taken from the originator of the other beneficiaries B00 (+) YES
(collection, collection), or other establishment
--------------------------------------------------------------------------------------------------------
The amount of waste transferred from last year C00 (+)
(the balance of the warehouse to the reporting year January 1.)
--------------------------------------------------------------------------------------------------------
The treatment
--------------------------------------------------------------------------------------------------------
The use of waste
--------------------------------------------------------------------------------------------------------
The use of waste in a manner similar as a fuel or other means NOT XR1 (-)
to produce energy
--------------------------------------------------------------------------------------------------------
Acquisition of/regenerace solvents XR2 (-) not
--------------------------------------------------------------------------------------------------------
Obtaining/reclamation of organic substances which are not used as XR3 (-) not
solvents (including composting and biological processes outside
biological decontamination)
--------------------------------------------------------------------------------------------------------
Recycling/reclamation of metals and metal compounds XR4 (-) not
--------------------------------------------------------------------------------------------------------
Recycling/reclamation of other inorganic materials XR5 (-) not
--------------------------------------------------------------------------------------------------------
Regeneration of acids and XR6 policy (-) not
--------------------------------------------------------------------------------------------------------
The restoration of the substances used to reduce pollution XR7 (-) not
--------------------------------------------------------------------------------------------------------
Obtain the components from catalysts XR8 (-) not
--------------------------------------------------------------------------------------------------------
Refining used oil or another way to reuse oil XR9 (-) not
--------------------------------------------------------------------------------------------------------
Application to the soil, which is a boon for agriculture or improves the XR10 (-) not
the ecology of the
--------------------------------------------------------------------------------------------------------
The use of waste generated by the application of any of the procedures mentioned XR11 (-) not
under the designation R1 to R10
--------------------------------------------------------------------------------------------------------
Pretreatment of the waste to the application of any of the procedures referred to under XR12 (-) not
the designation R1 to R11
--------------------------------------------------------------------------------------------------------
Storage of materials before application of any of the procedures referred to under the XR13 (-) not
the designation R1 to R12
(with the exception of temporary storage at the point of origin before the collection)
31. December of the reference year
--------------------------------------------------------------------------------------------------------
Disposal of waste
--------------------------------------------------------------------------------------------------------
At a level, or below ground level (landfill) XD1 (-) not
--------------------------------------------------------------------------------------------------------
Land treatment (e.g. biodegradation of liquid waste XD2 (-) not
or sludge in the soil, etc.)
--------------------------------------------------------------------------------------------------------
Deep injection (e.g. injection čerpatelných liquid waste into the XD3 (-) not
Wells, salt domes or space of natural origin, etc.)
--------------------------------------------------------------------------------------------------------
Storage surface impoundment (e.g. discharge of liquid waste or XD4 (-) not
sludges into pits, ponds, lagoons, etc.)
--------------------------------------------------------------------------------------------------------
Specially engineered landfill (e.g. placement XD5 (-) not
in separate, sealed, closed space isolated each other and
from the surrounding environment, etc.)
--------------------------------------------------------------------------------------------------------
Biological treatment not specified elsewhere in this annex which results in final XD8 (-) not
compounds or mixtures which are discarded by some
from the procedures referred to under the name of D1 to D12
--------------------------------------------------------------------------------------------------------
Physico-chemical treatment not specified elsewhere in this annex which results in which the XD9 (-) not
final compounds or mixtures which are disposed of
one of the procedures referred to under the name of D1 to D12
(e.g. evaporation, drying, calcination)
--------------------------------------------------------------------------------------------------------
Incineration on land XD10 (-) not
--------------------------------------------------------------------------------------------------------
The final or permanent storage (e.g. storing in containers to down) XD12 (-) not
--------------------------------------------------------------------------------------------------------
Edit the composition or mixed waste before their submission to any XD13 (-)
from the procedures referred to under the name of D1 to D12
--------------------------------------------------------------------------------------------------------
Edit other properties of the waste (in addition to the modifications included in the D13) before the NOT XD14 (-)
removing any of the procedures referred to under the name of D1 to D13
--------------------------------------------------------------------------------------------------------
Storage of materials before deleting them to some of the procedures XD15 (-)
listed under the designation to D14 (excluding temporary storage,
on the point of origin before the Assembly the necessary quantity) to 31. December
the reporting year
--------------------------------------------------------------------------------------------------------
Other
--------------------------------------------------------------------------------------------------------
The recovery of waste, with the exception of the use of sludge in accordance with Decree No 382/2001 Sb. XN1 (-) Not
on landscaping, etc.
--------------------------------------------------------------------------------------------------------
The handover of the WASTEWATER TREATMENT PLANT sludge for use on agricultural land XN2 (-)
--------------------------------------------------------------------------------------------------------
The handover of the other beneficiary (in addition to the carrier, the carrier), or other XN3 (-)
the establishment
--------------------------------------------------------------------------------------------------------
The balance on the warehouse to 31. December reporting year XN5 (-) not
--------------------------------------------------------------------------------------------------------
The cross-border shipment of waste from a Member State of the EU in the CZECH REPUBLIC (+) BN6 YES
--------------------------------------------------------------------------------------------------------
The cross-border shipment of waste in the EU Member State from the Czech Republic (-) XN7 YES
--------------------------------------------------------------------------------------------------------
(Parts, waste) for reuse XN8 (-)
--------------------------------------------------------------------------------------------------------
Processing of wreck cars XN9 (-)
--------------------------------------------------------------------------------------------------------
The sale of the waste as raw materials ("secondary raw material") XN10 (-)
--------------------------------------------------------------------------------------------------------
The use of waste for reclamation XN11 (-)
--------------------------------------------------------------------------------------------------------
Waste as a technological material to ensure the landfill XN12 (-)
--------------------------------------------------------------------------------------------------------
Composting XN13 (-)
--------------------------------------------------------------------------------------------------------
Biological decontamination XN14 (-)
--------------------------------------------------------------------------------------------------------
Retreading of tires XN15 (-) not
--------------------------------------------------------------------------------------------------------
Imports of waste from a State which is not a Member State of the EU BN16 (+) YES
--------------------------------------------------------------------------------------------------------
The export of waste to the State which is not a Member State of the EU (-) XN17 YES
--------------------------------------------------------------------------------------------------------
The processing of electronic waste XN18 (-) not
--------------------------------------------------------------------------------------------------------
The takeover removed certain products or recovered BN30 (+) YES
electrical and electronic equipment from a legal person or natural person entitled
the business, which provides a return under section 37k or section 38 of the Act,
the first takeover of wreck cars, when it was at the same time issued a receipt
According to section 37b of the law or of the receipt of the waste by nepodnikajících natural
individuals-citizens
--------------------------------------------------------------------------------------------------------
Waste after treatment, if not change the waste catalogue number BN40 (+)
--------------------------------------------------------------------------------------------------------
Counting the difference-the lack of settlement waste XN50 (+)
--------------------------------------------------------------------------------------------------------
Counting the difference-compensation excess waste XN53 (-)
--------------------------------------------------------------------------------------------------------
The old burden, natural disaster, landfills, etc. XN60 (+)
--------------------------------------------------------------------------------------------------------
The old burden, natural disaster, landfills, etc. XN63 (-)
--------------------------------------------------------------------------------------------------------
Table No. 2-waste management
The way the origin of the waste is referred to a three-digit code.
The origin of the waste:
A00 = for their own waste (produced)
B00 = waste taken
C00 = removed from inventory for waste from the previous year
Methods of treatment:
Encoding methods of disposing of the used code from table 2, the
a distinction is made according to the origin of the waste management.
The method of waste management code (XYZ), whose first letter
indicates the origin of the waste, the next letter and digit means the method code
waste management.
Method of loading:
X = and = for their own waste
X = B = taken for waste
X = C = waste removed from the inventory of the previous year
This means that:
AYZ = their own waste, which has been loaded in a way the YZ
BYZ = inherited the waste, which was loaded in a way the YZ
CYZ = waste removed from inventory from the previous year, which was
loaded way YZ
While the table management methods:
Y = 0 or R or D or N
Z = 0 or the last number 3-person code (consisting of 2 letters and
numbers) from a table No 2
indicates the origin of the waste X Y Z indicates how
Specifies the origin of the waste Specifies the code according to the table No 1
Sorting is not a separate storage of different types of waste in the
their emergence.
In the table of codes are not used those methods, which are banned in the Czech Republic
or out of the account.
The statement "the amount of waste-/+" refers to the quantity and Quantity columns +
-in the annual report.
Indicate Partner "Yes" means that the partner must always be in the annual
report completed, indicate "no" Partner means that the partner is
not to be completed.
Warning to report:
Reporting pursuant to this annex shall be sent in electronic form
through an integrated system of performance reporting obligations in the
the area of the environment according to law No. 25/2008 Coll., on the integrated
registry of environmental pollution and the implementation of the integrated system
reporting obligations in the field of the environment and amending
some of the laws. ".
Annex 9
Model application for the consent of the Ministry of the environment with the use of
the funds earmarked from the bank account set up
by the manufacturer for the purpose of financing the management of electronic waste management
------------------------------------------------------------------------------------------
1. The organizer of the earmarked bank account-the manufacturer of the electrical equipment
------------------------------------------------------------------------------------------
Registration number-manufacturer List
------------------------------------------------------------------------------------------
CORPORATE ID
------------------------------------------------------------------------------------------
The manufacturer of the electrical equipment (name):
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
Street, no.:
------------------------------------------------------------------------------------------
Obec: PSČ
------------------------------------------------------------------------------------------
2. the Bank
------------------------------------------------------------------------------------------
Bank name: bank code:
------------------------------------------------------------------------------------------
Branch address: ZIP/POSTAL CODE
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
The number of established escrow account
------------------------------------------------------------------------------------------
Constant symbol, variable symbol
------------------------------------------------------------------------------------------
Specific symbol
------------------------------------------------------------------------------------------
Date: Date:
------------------------------------------------------------------------------------------
Bank stamp and signature of the responsible person's stamp and signature of the account owner
------------------------------------------------------------------------------------------
3. the total amount of funds drawn from an earmarked account
------------------------------------------------------------------------------------------
The financial amount in CZK according to annex No 1
------------------------------------------------------------------------------------------
The financial amount in words according to annex No 1
------------------------------------------------------------------------------------------
4. the Ministry of the environment of the Czech Republic
------------------------------------------------------------------------------------------
The address of the registered office:
------------------------------------------------------------------------------------------
The responsible official of the Ministry of the person:
------------------------------------------------------------------------------------------
Phone:
------------------------------------------------------------------------------------------
e-mail:
------------------------------------------------------------------------------------------
Date:
------------------------------------------------------------------------------------------
Stamp and signature of the responsible official of the Ministry of
------------------------------------------------------------------------------------------
Annex No 1 evidence of cost incurred on the financing of the management
electronic equipment originating in households listed on the market after the date of
13. August 2005, or evidence of the cost incurred to finance
disposal of electronic waste management of solar panels placed on the market after the date of
January 1, 2013
Annex No 2 Listing status of funds stored on the assigned
bank account-bound for the past calendar year
The explanatory notes to annex No 9
To part 1
This part of the Eee producers, who satisfies the obligations
in section 12, paragraph. 1 (a). and) or under section 14a paragraph. 1. The manufacturer of the
is entitled to draw from the funds earmarked to the banking
account solely on the fulfilment of the obligations the management of electrical and electronic equipment
originating from households, which was put on the market after day 13. August
2005, and with the electronic equipment from the solar panels, which have been placed on the market
after day 1. January 2013, or cancel it only with the consent of the
of the Ministry.
If the manufacturer of the system in an individual fails to meet its obligations to fund the
waste electrical and electronic equipment from private households, which was
placed on the market after day 13. in August 2005, the Ministry on the basis of
the decision of the Czech environmental inspection under section 76, paragraph. 1 (a).
(c) the consent) of the Act shall issue with the amount of cash that the manufacturer
transfers from your bank account earmarked for the account of the operator
the collective system for financing the management of historical
electronic equipment originating in the households of the same group
electrical and electronic equipment, which the manufacturer lists or featured on the market after a day of the 13.
August 2005.
If the manufacturer of the system decides to perform his duties
other than an individual, in the context of the administrative procedure according to § 37i
paragraph. 4 the law Ministry will issue a consent to transferring cash
funds from the bank account earmarked in accordance with the
the data.
To part 2
This part to be completed by the Bank with which the account is tied.
The accuracy of the data referred to in both parts of the signature and stamp of the provisional
the representative of the Bank and the account holder.
To part 3
The manufacturer shall indicate the amount of the electrical equipment required amounts.
Annex No 1 contains all the documents, invoices, and summarize them, on
the basis of which is the calculated amount which requires the manufacturer to draw from
earmarked bank account. All the documents for drawing must be
only for the previous calendar year before the year in which the annual report with
the proposal submitted to the funds.
To part 4
This part to be completed by the Ministry. In the case of consent with the drawing of the proposed
This part of the financial amount is filled in.
On the basis of a confirmed "consent" by the Ministry of the Bank is entitled
referred to the amount of money from the bank account earmarked release
the owner of the account.
Part of the application is the dump funds stored on the
assigned bank account for the bound the previous calendar year (annex No.
2).
Annex 10
The method of calculating the minimum amount of contributions and the method of calculating the minimum amount of
the saved funds to your bank account on the bound
ensuring the financing of the management of electronic waste from solar panels
The minimum amount of contribution the manufacturer who fulfils the obligations imposed by § 37p
paragraph. 1 of the law within the framework of the collective system and the minimum aggregate amount
the contributions of the operator of solar power, which fulfils the obligations under
section 37p paragraph. 2 of the Act, (hereinafter referred to as "the minimum amount of contributions"), and the minimum
the amount of the deposited funds to your bank account-bound
to ensure the financing of the management of electronic waste from solar panels
shall be determined so as to cover all anticipated costs for the
ensure the transmission to the processing, collection, separate collection,
transport, processing, use, and delete the forecast quantity
electronic waste from the solar panels and the management of related records, and
in Czk, depending on the weight of the electronic waste from the solar panels. U
solar panels placed on the market after 1 January 2007. January 2013 with an indication of their
the weight determined by the actual weight of the panels. For solar
panels placed on the market before 1 January 1998. January 2013, which form part of the
solar power plant, with an indication of their weight determined according to the formula:
M = P x
in which:
M is the mass of the solar panels installed in the solar power plant for the purposes of calculating the minimum amount of
the contribution referred to in kg.
P represents the performance of the solar power plant under a licence for the production of electricity in this solar power station released
The Energy Regulatory Office stated in Watts (Wp).
The solar panel represents the average weight per unit of output; This average weight
is 0.11 kg.
The actual amount of the anticipated costs of the manufacturer and the operator
demonstrate the collective system in relation to:
-the estimated total amount recovered and collected separately
solar panels,
-the expected number of seats taking back and separate collection,
-contracts with the operators of collection sites and separate collection with
indication of prices for subscription and ensure separate collection,
-contracts with the processor for the processing of stating the prices of solar
panels,
-contract with the carrier, stating the price for transportation panels.
The rate for calculating the minimum level of contributions and the minimum amount of stored peněžníchprostředků on assigned bound bank account is calculated according to the formula:
S = Nose + + Nzpr + To Susquehanna County-Pds
in which:
With equal to the rate for the calculation of the minimum amount of contributions and the minimum amount of funds assigned to the bound
bank account in 1 kilogram of mass electronic waste from the solar panels.
The nose is equal to the estimated cost of the
-takeback and separate collection of 1 kilogram of mass electronic waste from solar panels, while these costs shall include
the cost of establishing and maintaining places collection and separate collection in sufficient availability in the Czech
of the Republic, in accordance with section 37k paragraph. 6 of the Act, in terms of solar panels placed on the market after 1 January 2007. January 2013,
-transfer to handle in terms of solar panels placed on the market before 1 January 1998. January 2013. The place of transfer for processing
It is the place of collection and/or separate collection or solar power plant, if it is provided for by the Treaty between the
operator of the collective system and operator of solar power, and if the case collection
(concentrating) solar panels intended to pass for processing in the místěsolární power plant met requirements
the gathering (concentration) of waste under special legislation ^ 2)
Susquehanna county is equal to the estimated cost to secure carriage of 1 kg of weight of electronic waste from solar panels
from the point of collection and separate collection or from the point of transfer for processing when it comes to solar panels placed on the
market by 1 January 2004. January 2013, to processors of electronic waste solar panels, including the storage of electronic waste
from solar panels before processing, loading and unloading, and the cost of running the sites where will solar panels
collected and stored before being passed to the processor.
Nzpr is equal to the estimated cost for the processing of 1 kg weight of electronic waste from solar panels, using the best
the available techniques, including the use of and delete the získanýchmateriálových folder, including cabling,
connection of modules (called junction boxes) and converters of voltage (called inventory-inverter).
The cost for the processing of electronic waste from solar panels must be laid down so that the
-use of electronic waste has been secured from the solar panels to the extent of at least 85% of its average weight, and
preparation for the reuse and recycling of electronic waste from solar panels in the range of at least 80% of its average weight,
-management of electronic waste from solar panels was secured, even if the decline in prices of secondary
raw materials and increases in energy prices.
To be equal to the estimated cost of the Administration associated with the direct provision of compliance with obligations the manufacturer or operator of the
solar power plants under the provisions of part four of the title II of part 8 of the Act on a 1 kilogram mass of electronic waste
from solar panels (e.g. operation of dispatching for the removal of panels from the site collection and separate collection,
reporting and accounting and ensure the control mechanisms of the system and of its participants-manufacturers, operators of
solar power plants, the operator of a collective system, operators of installations for the processing of electronic waste).
PDS is equal to the expected revenues from the sale of secondary raw materials obtained zezpracování 1 kg weight of electronic waste
from the solar panels.
The minimum rate for the calculation of the minimum aggregate amount of contributions by the operator of solar power, which fulfils the obligations under
section 37p paragraph. 2 of the Act, and the minimum amount of funds on the bank account is assigned the bound 8.50 euro.
Annex 11
The procedure for carrying out the test in functionality used for electrical equipment
the purpose of their cross-border transport
When carrying out the test in functionality of EEE must be used
respect the requirements contained in the accompanying technical documentation,
that contains the manufacturer's instructions for installation, handling, repair, maintenance,
the default and subsequent checks and revision of electrical equipment, as well as the guidelines
for any Exchange or alteration of parts of the device to reliably
verified that the controlled and revised its electrical parameters
corresponds to the accompanying technical documentation of the manufacturer and is in a State that
does not endanger the safety of persons, livestock or things.
The individual steps in the implementation of the test in functionality
electrical equipment should be carried out in the order, which is also shown. To
each step of the proceeding, if the electrical equipment meet the step
the previous one, where appropriate, on the basis of the result of the previous step.
The procedure for carrying out the test in functionality of Eee is determined
as follows:
1. Inspection of used electrical equipment
For each electrical equipment shall be carried out its examination. During this inspection,
electrical protection class is found, and whether to supply
electrical equipment with protective conductor. Whichever is chosen next steps
tests the functionality of EEE.
During the search, the electrical equipment thoroughly inspected externally.
2. the measurement of the
2.1. basic measurement procedure
The basic measurement procedure is established for the electrical equipment, which can be
for the purpose of measurements from the network disconnect.
2.1.1. The measurement of the resistance of the protective conductors
All electrical equipment and extension cords, detachable cords
with protective conductor resistance shall be measured to the protective conductor. If u
electrical protection class II, which is equipped with a protective conductor,
measure the resistance of the protective conductor is not feasible, for example, because of
that the protective conductor is inaccessible, you can just verify it by that measure the
current flowing through the protective conductor.
2.1.2. The measurement of the insulation resistance
All electrical equipment and extension cords, detachable
, for which it is technically possible, measure the insulation resistance.
In the event that the measuring of insulation resistance of Eee is not technically
You can, for example, if the electrical equipment is equipped with parts that are
turn off or disconnect the power supply to reset position
non-measuring the insulation resistance of the entire electrical (relay,
contactors, electronic switching, etc.), measure the insulating resistance only
supply.
2.1.3. measurement of leaking streams
If the measurement of the insulation resistance technically possible and his performing
Verify the satisfactory condition of the insulation shall be:
-class of protection for electrical equipment and measuring the protective conductor of the stream,
-for electrical protection class II conductive parts and electrical equipment
class of protection, which are accessible to the touch, but they are not connected to the
conductor, measurement of touch current.
If the measurement of the insulation resistance not technically possible or if it is a
electrical equipment with heating elements, which was the result of measurement
the insulation resistance or inadequate, information technology equipment,
shall be carried out:
-class of protection for electrical equipment and the protective conductor current measurement;
does not apply to the measurement of the leakage current, the replacement method
-for electrical protection class II conductive parts and electrical equipment
class of protection, which are accessible to the touch, but they are not connected to the
conductor, measurement of touch current.
2.2. the replacement measurement procedure
Spare the measurement procedure is established for the Eee, which for the purpose of
the measurement is not possible at the time of the test in functionality to disconnect from the network.
As soon as you can disconnect from the electrical network, the basic
the measurement procedure in accordance with point 2.1.
2.2.1. The measurement of the resistance of the protective conductors
The electrical protection class I, measured the resistance of the protective conductors.
2.2.2. measurement of leaking streams
On the conductive parts of the electrical protection class II and for conductive parts
electrical protection class I, which are accessible to the touch, but
are not connected to the protective conductor, the touch stream.
The electrical protection class I can measure the current flowing through the
the protective conductor also so that the appropriate cabinet measure
klešťovým ampérmetrem current flowing through the protective wire plugged
the circuit, which is the measured electrical equipment connected.
2.3. Control terminals
In places the outer connection to safe small voltage that is
generated in electrical equipment, verifying whether the limit is not exceeded
leave the value of safe small voltage.
The maximum value of voltage for circuits of SELV and THICKNESS 2 MM between the conductors is 50 for
AC and DC voltage for 120 in. Against the country for SELV circuits
conductors must not be measured for any voltage circuits, THICKNESS 2 MM, can be
the maximum voltage of one of the wires against the earth 50 in for AC and 120 in
for DC voltage.
2.4. Cable reels
Detachable inlets and extension pipes and their accessories
must also be subjected to the tests, and according to the situation, which could
compromise. At the inlet to the protective conductor resistance shall not be the
greater than 0.2? When the length of the supply line to the 3 m to this resistance is added
0.1? on each of the other 3 m length of the supply line. In no case, however, shall not be
exceeded the value 1?. Insulating wiring must conform to the same status
the values that are valid for the entire electrical equipment.
For the above tests must be taken to ensure all the conditions in which
electrical equipment is operated and which have an impact on the size of the
leaking streams.
3. Test the running of used electrical equipment
Connects to the electrical mains voltage. It shall be verified whether the
control and security elements fulfilling its function reliably, without
their control was difficult too large mechanical resistances. In
the case of the electrical equipment must be equipped with an engine running
regular, without excessive noise and sparking at the commutator. It is found
whether the electrical works as it should.
4. Check the marking of electrical equipment
Marking of electrical equipment with, if necessary, supplement or
restores.
Damaged or faint markings on the shelters, for example,
indicate the direction of rotation, etc., must be restored and ensured its
durability.
The requirements referred to in paragraphs 1 to 4 shall be considered satisfied if the proceeds
in conformity with ČSN 33 1600 2-revision and control of electrical
appliances during use. In the event that the functionality of Eee
Unable to verify the procedure laid down in points 1 to 4, the test in functionality
electrical and electronic equipment in accordance with the procedure laid down by the manufacturer, or, if not
This procedure laid down by the manufacturer, in conformity with the relevant technical standard
related to the type of electrical equipment, such as:
-ČSN EN 62353-medical electrical equipment-repeated tests
and test after repair of medical electrical equipment,
-CSN EN 60974-4 ed. 2-arc welding equipment-Part 4:
Periodic inspection and testing
-ČSN EN 60079-17 ed. 3-explosive atmospheres-part 5: review and
preventive maintenance of electrical installations.
Annex 12
Documentation and other documents to accompany the cargo transported
used electrical equipment
And documentation to be cargo transported used electrical equipment
Table 1: data on the sender/holders/beneficiaries carried electrical equipment
--------------------------------------------------------------------------------------------------------------------------
The sender of the Eee Eee Eee is the holder of a Recipient
Business name/name/name and surname: business name/name/name and surname: Name/name and surname:
Id: COMPANY IDENTIFICATION NUMBER: Address:
Address: address: State:
Contact information: contact information: contact information:
Phone: Phone: Phone:
E-mail: E-mail: E-mail:
--------------------------------------------------------------------------------------------------------------------------
Table 2: particulars of Eee
--------------------------------------------------------------------------------------------------------------------------
Serial Name of Eee, producer, mark the date on which the protocol number
the number of tests the functionality of the test in functionality
items
--------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------
Table 3: list of dangerous substances contained in electrical and electronic equipment carried
--------------------------------------------------------------------------------------------------------------------------
Serial Name of Eee, a manufacturer, a brand of dangerous substances contained in electrical and electronic equipment
the number of the
items
--------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------
Table 4: statement carried on his responsibility for the electrical equipment comply with the obligations referred to in
§ 37r law
--------------------------------------------------------------------------------------------------------------------------
A statement carried on its electrical equipment holder's responsibility for the fulfilment of the obligations under section 37r law
Undersigned declares that he is the holder of the electrical equipment referred to in the annexed list of transported
Eee is responsible for the fulfilment of the obligations under the section of the Act and that this 37r electrical equipment is not waste within the
the meaning of section 3 (3). 1 of the law on waste.
Holder electrical equipment:
Name and surname
the statutory body of the holder: date: signature:
--------------------------------------------------------------------------------------------------------------------------
B. Documentation to each individual piece of electrical equipment to be carried by
1. Log on to the test in functionality used electrical equipment
--------------------------------------------------------------------------------------------------------------------------
TEST THE FUNCTIONALITY OF THE USED ELECTRICAL EQUIPMENT NO. ...
--------------------------------------------------------------------------------------------------------------------------
INFORMATION ON ELECTRICAL GOODS
--------------------------------------------------------------------------------------------------------------------------
The name of the group, sub-group and Eee
---------------------------electrical equipment
The manufacturer of the electrical equipment
(if known)
--------------------------------------------------------------------------------------------------------------------------
Production or year of production electrical equipment
electrical equipment (if number (if known)
is available)
--------------------------------------------------------------------------------------------------------------------------
DATA ON THE PERFORMANCE OF THE TEST IN FUNCTIONALITY OF EEE
--------------------------------------------------------------------------------------------------------------------------
CLIENT TESTS THE TEST IN FUNCTIONALITY
FUNCTIONALITY BY:
--------------------------- ---------------------------
Business name/name/business name/name/
name and last name, first name and surname
--------------------------- ---------------------------
Address Address
--------------------------- ---------------------------
COMPANY REGISTRATION NUMBER the registration number of the permission
---------------------------, and the registration number of the certificate
Phone
--------------------------------------------------------------------------------------------------------------------------
The result of the inspections of electrical equipment
--------------------------------------------------------------------------------------------------------------------------
The results of the tests carried out
--------------------------------------------------------------------------------------------------------------------------
An inventory of used equipment
--------------------------------------------------------------------------------------------------------------------------
The evaluation of the test operation of electrical equipment
--------------------------------------------------------------------------------------------------------------------------
The overall evaluation of the State of the electrical equipment from the point of view of the safety of people, animals, amajetku
--------------------------------------------------------------------------------------------------------------------------
Note
--------------------------------------------------------------------------------------------------------------------------
The date of the signature of the person drawing up the Protocol, which carried out the test in functionality of Eee
--------------------------------------------------------------------------------------------------------------------------
Test the functionality of the assumed (date and signature)
--------------------------------------------------------------------------------------------------------------------------
2. the document on the content of hazardous substances in electrical and electronic equipment transported
Be accompanied by a document, in which the information is given about the contents
hazardous substances in electrical and electronic equipment.
The explanatory notes
Act means the Act No. 185/2001 Coll., on waste and amending certain
other laws, as amended.
Part And
Table 1: data on the sender/holders/beneficiaries of the transported
electrical and electronic equipment
The sender of the Eee-lists the sender information is used
electrical and electronic equipment that has the electrical equipment in possession before the start
cross-border transport.
Business name/name/name and surname-lists trade name,
How is registered in the commercial register, or the name of the legal person,
or name, or names, and surname of the natural person.
COMPANY REGISTRATION NUMBER-the identification number of the person to be completed, if it has been allocated.
Address-the address of the registered office of the sender filled in, or the address of the place of his
permanent residence as regards the nonentrepreneurial natural person.
Holder electrical equipment-data on the holder of the transported
electrical and electronic equipment. The following information must be completed only in the event that the holder of the
a person is different from that of the sender. Data is filled in the same manner as
for the sender.
The recipient of EEE-data on the beneficiaries of the transported
used electrical equipment.
Name/name and surname-lists the name of the foreign company or
the name, or names, and surname of the natural person.
Address-the address of the registered office is to be given or the place of residence of the recipient.
The State of export-enter the name of the State in which over
electrical and electronic equipment carried by the recipient.
Table 2: particulars of Eee
Shows a list of all transported used electrical equipment after the
the individual pieces, which are transported in a single consignment.
Table 3: list of dangerous substances contained in transport
electrical and electronic equipment
Enter the list of dangerous substances, which are contained in the
electrical and electronic equipment transported.
Table 4: statement carried his electrical equipment
the responsibility for fulfilling the obligations referred to in § 37r law
Enter the business name, the name, or the name or names, and surname
the holder of the Eee (identical with the table no. 1), name, or
name and surname of the statutory authority of the holder, if the holder is
legal person, date and signature of the holder or of the statutory
authority.
Part (B)
1. Log on to the test in functionality used electrical equipment
Each protocol is indicated by the number that must be unique within the
one shipment transported used electrical equipment.
Information on electrical goods
The name of the electrical and electronic equipment-electrical and electronic equipment shall be the technical name.
Manufacturer of electrical equipment-enter the name of the manufacturer of the electrical equipment (if it is
I know). As the manufacturer shall indicate the person who manufactured the electrical equipment,
or whose mark on electrical and electronic equipment.
Group and the Sub-group of EEE-Eee group shall be
in accordance with Annex 7 of the Act, and the subgroup of electrical equipment according to annex No.
1 of this order.
Data on the performance of the test in functionality of Eee
Client test in functionality-enter the business name or the name of the
the legal person or the name, or names, and surname of the natural person
who ordered the test in functionality used
electrical and electronic equipment, and further address, or the address of the Permanent
stay, if it is a natural person, the person's identification number if a
have been assigned, and dial-up connections.
Function test done-the data on the person under section 14 d of paragraph 1.
2 of this order, which carried out a test in functionality. If this person
a legal person, the name, or names, and surname
review technology.
Address-enter the address of the person under section 14 d of paragraph 1. 2 of this order,
that test in functionality.
The registration number and the registration number of the permission certificate shall be valid-
the registration number of the permission of the person under section 14 d of paragraph 1. 2 of this order,
that test in functionality and the registration number of the certificate
review technology.
The result of the inspection of EEE-on the basis of tests carried out
functionality shall indicate whether the function is used electrical equipment.
The results of the tests carried out used shall-measurement methods and
the values determined.
An inventory of used equipment-enter the list of measuring instruments, which
functional test were used.
Evaluation of the operation of electrical equipment tests-the control results shall be
the main controls and listening the noise assessment.
The overall evaluation of the State of the electrical equipment of the safety of persons,
animals and property-in the event that the status of the electrical equipment is inadequate,
the following lessons are also demonstrable users about this fact and
the draft measure, which is on the basis of the established facts must
make.
Note-it is reported any additional facts that have been identified in the
test the functionality of used electrical and electronic equipment.
2. the document on the content of hazardous substances in electrical and electronic equipment transported
As proof of the content of hazardous substances in electrical and electronic equipment transported
It can serve as the accompanying technical documentation for the product
provided by the manufacturer, if the information it contains.
Selected provisions of the novel
Article. (II) Decree No. 158/2011 Sb.
Transitional provisions
1. In the case of electrical equipment in the group to cancel the
a final decision on the registration of the collective system operators to
The list for the provision of the joint performance of the financing of the management of
historic electrical and electronic equipment, the manufacturer from the moment of cancellation of this
the decision of their obligations of financial collateral management with historical
electronic equipment in accordance with part III of Decree No. 352/2005 Coll., as amended by
amended, through the collective system, which was
cancelled by a final decision in the list for the provision of
the joint performance of the financing of the management of historical electrical and electronic equipment,
or through a collective system, which he handed to the date
October 12, 2005 a proposal on the list for the provision of common
the performance of the financing of the management of historical electrical and electronic equipment in the
a group of electrical and electronic equipment.
2. the means referred to in paragraph 1 shall carry out their obligations, the manufacturer of the financial
ensure the management of historical electronic equipment by
six months from the date of the entry into force of the new decision on the case
registration of the collective system to the list of operators for the provision of
the joint performance of the financing of the management of historical electrical and electronic equipment.
Article. (II) Act No. 178/2013 Sb.
Transitional provisions
1. Statement of the stored and selected funds from assigned
bank account-bound under section 14a paragraph. 3 Decree No. 352/2005 Coll.
as effective after the date of entry into force of this Decree, the manufacturer shall indicate
for the first time in the annual report on the implementation of the obligations for calendar year 2013.
2. a person registered in the list of manufacturers of electrical equipment in accordance with the legal
in the texts of the effective prior to the date of entry into force of this order
as the operator of a collective system for ensuring the financing of the
the management of electronic waste from solar panels or solar
Panel shall notify the Department of a change to the data resulting from the adoption of this
order procedure according to § 37i paragraph. 4 of the Act that for the day
the implementation of this change is deemed to be March 31. October 2013.
Article. (II) Decree No. 200/2014 Sb.
Transitional provisions
1. Annex 4 to the Decree No. 352/2005 Coll., as amended, effective after the date of
the entry into force of this order, for the first time used for the processing of the annual
reports for calendar year 2015.
2. For the purposes of the management of records under section 7 and 11 of Decree No. 352/2005 Coll.
as effective after the date of entry into force of this order, for a full
calendar year 2018 are divided into groups according to the electrical
Annex 7, part I of the Act and subgroups according to annex No 1, part I, to the
Decree No. 352/2005 Coll., the same applies to the processing of the annual reports referred to in
§ 6, and reports on the annual production and the management of electronic waste management, pursuant to section 11 of the
Decree No. 352/2005 Coll., as amended, effective after the date of entry into force of this
the order, for the calendar year of 2018.
1) directive of the European Parliament and of the Council of 2012/19/EU of 4 June. July
2012 on waste electrical and electronic equipment (WEEE).
2) Decree No. 383/2001 Coll., on details of the management of waste, in
the texts of Decree No. 41/2005 Coll. and Decree No. 294/2005 Sb.
3) Act No. 356/2003 SB., on chemical substances and chemical preparations
and amending certain laws, as amended. Law No.
86/2002 Coll., on the protection of the air and amending certain other acts
(Act on the protection of the atmosphere).
Act No. 258/2000 Coll., on the protection of public health and amendment to certain
related laws, as amended.
Government Decree No. 178/2001 Coll., laying down the conditions of protection
health of workers at work.
4) European Agreement concerning the international transport of dangerous goods-
ADR (Geneva, 1957), renowned in the collection of laws under no. 64/1987 Coll.
Of procedure for the international transport of dangerous goods by rail (RID).
5) Decree No. 381/2001 Coll., laying down a catalogue of waste List
hazardous waste and waste and lists the States for the purpose of export, import and
transit of waste and the procedure for granting consent for the export, import and
transit of waste (Waste Catalogue).
6a) § 2 (2). 1 (a). p) Act No. 634/1992 Coll. on consumer protection
as amended by law no 64/2000 Sb.
Decree No. 379/2000 Coll., laying down the conditions for determining
the different kinds of crystal glass, their properties and the methods of
the labelling of products from Crystal glass.
7) Law No 185/2001 Coll., on waste and amending certain other
laws, as amended.
Decree No. 383/2001 Sb.
8) Law No. 18/1997 Coll. on peaceful uses of nuclear energy and
ionizing radiation (the Atomic Act) and amending and supplementing certain
laws, as amended.
10A) Regulation of the European Parliament and of the Council (EC) No 842/2006 of 17 May 2006.
May 2006 on certain fluorinated greenhouse gases.
10A) Regulation of the European Parliament and of the Council (EC) No 842/2006 of 17 May 2006.
May 2006 on certain fluorinated greenhouse gases.
11) section 29 of Act No. 86/2002 Coll.
section 31, paragraph 11). 5 of Act No. 86/2002 Coll., on the protection of the air in the text of the
Act No. 124/2008 Coll., Act No. 483/2008 Coll., Act No. 223/2009 Sb.
Act No. 227/2009 Coll., Act No. 281/2009 Coll. and Act No. 292/2009 Sb.
Decree No. 279/2009 Coll. on the prevention of emissions of controlled substances and
fluorinated greenhouse gases.
12) Act No. 356/2003 SB., on chemical substances and chemical
products and amending certain laws, as amended.
Act No. 86/2002 Coll.
Act No. 254/2001 Coll. on waters and on amendments to certain acts (the water
Act), as amended.
Act No. 258/2000 Coll., on the protection of public health and amendment to certain
related laws, as amended.
13) Act No. 86/2002 Coll.
section 93, paragraph 14). 6 (a). (g)) of law No 427/2011 Coll. on supplementary
pension savings, as amended.
section 93, paragraph 15). 6 (a). (h)) Law No 427/2011 Coll., as amended
regulations.
16) Act No. 563/1991 Coll., on accounting, as amended.
17) Act No. 174/1968 Coll., on State specialized supervision of safety
work, as amended.
Decree No. 50/1978 Coll., on professional competence in electrical engineering, in
the texts of Decree No. 98/1982 Coll.
19) the Convention on the contract for the international carriage of goods
(CMR), adopted at Geneva on 19 June. in May 1956, the renowned under no. 11/1975
Coll., as amended by the Protocol adopted in Geneva on 5 December. July 1978,
declared under the No. 108/2006 Coll., m.s.
The additional protocol to the Convention on the contract for the international carriage of
freight transport (CMR), concerning the electronic consignment note
, adopted at Geneva on 20 April February 2008, promulgated under no. 66/2011 Coll. m.s.
The Convention on international carriage by rail (COTIF), adopted in Bern on
December 29, 1980, under the famous No. 8/1985 Coll., as amended
changes and additions.
20) Law No 73/2012 Coll., on substances that Deplete the ozone layer, and the
on fluorinated greenhouse gases. Regulation of the European Parliament and of the
Council Regulation (EC) No 1005/2009 of 16 January. September 2010 on substances that Deplete the
the ozone layer, as amended.
21) section 26 (b). and) Law No 185/2001 Coll.